gst1-plugins-bad: fix openh264 handling

Commit 301e8ffbb25 (gst1-plugins-bad: update configure options) added a sub
option for openh264, but didn't propagate the toolchain dependencies or add
any configure options.

Fix this and while we're at it also add a help text for the option.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1: Allow to build OpenJPEG plugin

The OpenJPEG library is packaged in buildroot (version 1) and there is a
plugin "openjpeg" using it in gst1-plugins-bad. This commit add the option
for building this plugin. It provide a JPEG2000 encoder and decoder.

[Peter: use 'select' instead of 'depends on', sort alphabetically]
Signed-off-by: Vincent Dehors <vincent.dehors@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netatalk: bump to version 3.1.8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iptables: add parallel build fix patch

Fixes:
http://autobuild.buildroot.net/results/5c4/5c4ca595c4bf744aa00fc58851eeccf81f9c6ecc/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bind: disable libjson support

It conflicts with jsoncpp, bind probes for json/json.h first, but that
header is installed by jsoncpp, which is completely different from
json-c.
Since it's not clear who's correct here (there might be some other
json-c predecessor/version that installs there as well) and the same
functionality (stats channel) is provided by libxml2 as well, just
disable libjson support completely.

Fixes:
http://autobuild.buildroot.net/results/226/2262c9b46663ea7a45e128a5fd7ff30417c2c2a7/build-end.log
(indirectly, it was probing aboslute directories while searching for it)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: add missing select BR2_PACKAGE_TSLIB

Fixes:

  http://autobuild.buildroot.org/results/36c/36c56d10abcf96afd389f2ebe8db4dc13659997b/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus: audit support needs both audit and libcap-ng

As was suggested by the <pkg>_DEPENDENCIES variable, the audit support
in DBus requires both audit and libcap-ng. However, it didn't take
care of the fact that libcap-ng must be enabled in the configuration
to depend on it, causing some build failures with the newly added
check.

DBus configure.ac confirms that both packages are needed to enable
audit support, so we simply fix the condition to only be true when
both BR2_PACKAGE_AUDIT *and* BR2_PACKAGE_LIBCAP_NG are true.

Fixes:

  http://autobuild.buildroot.org/results/239/23953cc66faecb65e9ebf1f6980924f823d736a2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: add missing select BR2_PACKAGE_LIBMCRYPT

Fixes:

  http://autobuild.buildroot.org/results/b0c/b0c9ea0d577a74549476ddbdb0d2ecd09311c765/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openbox: add missing propagated dependencies from pango

pango needs atomics support and C++ support, and those dependencies
where not propagated to the new openbox package.

Should fix:

  http://autobuild.buildroot.org/results/d3b/d3b17335f2e5720a69b4635602fef30a5ae34660/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lttng-babeltrace: add missing select BR2_PACKAGE_POPT

lttng-babeltrace unconditionally uses "popt" in its <pkg>_DEPENDENCIES
variable, but does not select it. This commit fixes this
inconsistency.

Fixes:

  http://autobuild.buildroot.org/results/274/2748a02b090ce078fc880bd821df3c913b8c8dfd/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sshfs: use SSHFS_VERSION variable in URL

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libfuse: use LIBFUSE_VERSION variable in URL

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vboot-utils: ssize_t needs unistd.h

Fixes
http://autobuild.buildroot.net/results/95c8708411fbb116f313a0fdeccacf92cf9e3d8d/
http://autobuild.buildroot.net/results/cf4aa60f9fc9c48ff13d3233994b77b7c0950afe/
http://autobuild.buildroot.net/results/6f7dcafde693f06dfc88c922c5f8dd70ae2e30b5/
http://autobuild.buildroot.net/results/a2e95784d32c8842f6947801fd0d8c48f68b84e2/
http://autobuild.buildroot.net/results/f69ae4c9eee27df43389ae76048fb4ddd5a3eca6/

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vboot-utils: MTD_CHAR_MAJOR definition

Fixes
http://autobuild.buildroot.net/results/a6360fd21314899321071c34fcb4892c5eed9bcc/
http://autobuild.buildroot.net/results/0af3aa4a429c45d3a2609913ec1040f32378f3c8/
http://autobuild.buildroot.net/results/cc4940fd6f51b31d71014f5aedee5223180eb36e/

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-paho-mqtt: add new package

Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tpm-tools: fix build with locale support

tpm-tools needs to link with libintl when locale support is enabled.

However, tpm-tools' build-system internally builds a couple of static libraries
used to build the final programs.
When linking these libraries or the final programs, we need to explicitly tell
the linker to link with libintl in order to resolve all the missing symbols.

Fixes:
  http://autobuild.buildroot.org/results/560/56020558ec298ac4007bf7f6ce030b3f2fa1157d/
  http://autobuild.buildroot.org/results/17f/17fc6ca79765fd9ecdacec4f5a2b58caa554d48d/
  http://autobuild.buildroot.org/results/2d2/2d2c655429df62da2b8746a564fc064609e96001/
  http://autobuild.buildroot.org/results/d52/d5259b83e7a269bca019d024366aa201f5a174fd/
  http://autobuild.buildroot.org/results/11c/11cb0d1e51459e75e5f376cb07ce0188f8f050c4/
  http://autobuild.buildroot.org/results/bad/bad9a97b4fff00732f2efb043bbb76a99963c491/
  http://autobuild.buildroot.org/results/2f8/2f8bd534e6fcd9d356fe9087cb1394b9b2c4192c/
  and many others...

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mbedtls: disable assembly for some scenarios

It's affected in the same way as polarssl, but use an enhanced trick
compared to 130ca81b since it's required by the codebase. Fixes:
http://autobuild.buildroot.net/results/584/584d1d12be9f2bbf45ccbdf93b6b442524059dcc/
http://autobuild.buildroot.net/results/d13/d13a06ba3fc0d7f08a03c04fcb484761da7af3f7/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bind: bump to version 9.10.3-P2

Leave the LTS series for the latest stable version for libressl
compatibility.
Unfortunately this means threads are now required, but this shouldn't be
a problem for a fully-featured resolver.

Drop 0001-disable-tests.patch since it's no longer required, genrandom
isn't run unless the tests are called upon.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: update help text

Since commit 00be67d84696 (wireshark: enable GUI options, 2015-12-02) the GUI
is enabled when the required libraries are present. Update the config help
text accordingly.

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: security bump to version 2.0.1

Fixes:
wnpa-sec-2015-31 - NBAP dissector crashes
wnpa-sec-2015-37 - NLM dissector crashes
wnpa-sec-2015-39 - BER dissector crashes
wnpa-sec-2015-40 - Zlib decompression crash
wnpa-sec-2015-41 - SCTP dissector crashes
wnpa-sec-2015-42 - 802.11 decryption crash
wnpa-sec-2015-43 - DIAMETER dissector crash
wnpa-sec-2015-44 - VeriWave file parser crashes
wnpa-sec-2015-45 - RSVP dissector crash
wnpa-sec-2015-46 - ANSI A & GSM A dissector crashes
wnpa-sec-2015-47 - Ascend file parser crash
wnpa-sec-2015-48 - NBAP dissector crash
wnpa-sec-2015-49 - RSL dissector crash
wnpa-sec-2015-50 - ZigBee ZCL dissector crash
wnpa-sec-2015-51 - Sniffer file parser crash
wnpa-sec-2015-52 - NWP dissector crash
wnpa-sec-2015-53 - BT ATT disector crash
wnpa-sec-2015-54 - MP2T file parser crash
wnpa-sec-2015-55 - MP2T file parser crash
wnpa-sec-2015-56 - S7COMM disector crash
wnpa-sec-2015-57 - IPMI dissector crash
wnpa-sec-2015-58 - TDS dissector crash
wnpa-sec-2015-59 - PPI dissector crash
wnpa-sec-2015-60 - MS-WSP dissector crash

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-serial: bump to 3.0

Add hash file, switch to setuptools and change project's home page to
GitHub.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netbsd-queue: actually use the Config.in file

In commit e84fd04e88bcda2771847958b3b5153e476db45f, Yann added a
Config.in symbol for netbsd-queue in a brand new Config.in file. But
that Config.in file was never included anywhere, making it somewhat
useless.

Let's include it under Libraries -> Other, even if its actual
inclusion location doesn't matter much since it's just a hidden
Config.in option anyway.

Fixes:

  http://autobuild.buildroot.org/results/d23/d23a1c51c4d7a260364aeef576fdf5a407abc2f6/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

minidlna, libsvg: do not use libjpeg directly, use jpeg

libjpeg should not be selected directly, as it is one implementation
of the virtual jpeg package. Consequently, this commit moves minidlna
and libsvg to use the jpeg virtual package instead.

The build has been tested with both libjpeg and jpeg-turbo variants.

Fixes:

  http://autobuild.buildroot.org/results/a12/a12760dea9e9d7ca62d14d0821539cc4b0c76835/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xfont_*: add missing select BR2_PACKAGE_XFONT_FONT_UTIL

Fixes:

  http://autobuild.buildroot.org/results/d63/d63b45c24d01bfb3409e90569a0708f1d4af905d/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcdaudio: disable on nios2, binutils assertion failure

Fixes:

  http://autobuild.buildroot.org/results/539/5397c51bc6915a082e873dee2d298f433172ef4d/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d: add missing select of xproto_glproto

When X.org is available, mesa3d has xproto_glproto in its
dependencies, but it forgets to select it. This commit fixes this
mistake, which fixes the following autobuilder failure:

  http://autobuild.buildroot.org/results/378/378bbf8520d67a67b5906ec177079542158a6be7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

collectd: fix incorrect select of libmodbus

BR2_PACKAGE_MODBUS does not exist, we meant to select
BR2_PACKAGE_LIBMODBUS.

Fixes:

  http://autobuild.buildroot.org/results/661/6617ea58424bf55640a70bee8fc3a6a8d098e3b2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: select netbsd-queue for musl toolchains

Following the introduction of the check that target packages must have
their Config.in option enabled, we started to see failures related to
netbsd-queue. Yann fixed the internal toolchain case in commit
e84fd04e88bcda2771847958b3b5153e476db45f. This commit fixes the
similar issue, but for the external toolchain case.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-virtual: do not check they are neabled

Virtual packages do not have a Kconfig symbol, so we must not check that
they are enabled.

Fixes:
    http://autobuild.buildroot.org/results/287/28713478cc6edf8e5d5c3e830fee86a42f0afa8d/
    ... and numerous similar failures ...

[Thomas:
 - use "$($(PKG)_IS_VIRTUAL)" != "YES" instead of !
   "$($(PKG)_IS_VIRTUAL)" = "YES"]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/netbsd-queue: add Kconfig symbol like for all target packages

Select that package from musl, too, since it is a dependency.

Fixes:
    http://autobuild.buildroot.org/results/15c/15c9a80fb2754ed1866b59d5e62d02691b57834e/
    ... and numerous similar issues ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/c-libraries: need linux-headers

Now that we check that a target package in the _DEPENDENCIES of another
package has to be enabled in config, all target packages must have a
kconfig symbol.

Add a Kconfig symbol for linux-headers, and select it from the packages
that depends on it (C libraries).

Also remove the now-misleading comments "for legal-info" from the C
libraries.

Fixes:
    http://autobuild.buildroot.org/results/2a9/2a9e5d27b34357819b44f573a834da1ba5079030/
    ... and numerous similar failures ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iptables: bump to version 1.6.0

Add option for nftables compat utilies and for bpf compiler/nfsynproxy
configuration tool.

Drop symlink trickery since it's not required any more.

Switch homepage to proper one and drop the kernel v2.4+ note since
that's not supported by buildroot anyway.

Drop most patches (except musl build) since they're upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xtables-addons: require kernel modules from Kconfig

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ti-gfx: require kernel modules from Kconfig

And reorder 'depends' before 'select'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rtai: require kernel modules from Kconfig

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/racehound: require kernel modules from Kconfig

And reorder 'select' after 'depends'

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nvidia-driver: require kernel modules from Kconfig

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-fusion: require kernel modules from Kconfig

And reorder 'depends' after 'bool'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: add blind kconfig option to require kernel modules

Currently, packages that need the kernel to have support for laodable
modules have two ways to require it:

  - either the use the kernel-module infra, which does it automatically,

  - or they do not use it, and they need to require it manually by
    setting the corresponding Makefile variable; however, they must only
    set it when they are actually enabled, which makes for a slightly
    cumbersome and ugly code, like:

        ifeq ($(BR2_PACKAGE_FOO),y)
        LINUX_NEEDS_MODULES = y
        endif

Introduce a new blind Kconfig option that packages can select to signify
they need kernel modules. That Kconfig option is then used to set the
Makefile variable.

It makes it cleaner:

  - code is simpler (one Kconfig line instead of a Makefile if-block,

  - this is handled at the Kconfig level, which is where we usually
    handle such dependencies.

Packages will be updated in follow-up commits.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

graph-depends: correct is_dep() comment

The uncached variant is called is_dep_uncached(), not is_dep_full().

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

graph-depends: optimize remove_transitive_deps()

For large configurations, the execution time of
remove_transitive_deps() becomes really high, due to the number of
nested loops + the is_dep() function being recursive.

For an allyespackageconfig, the remove_extra_deps() function takes 334
seconds to execute, and the overall time to generate the .dot file is
6 minutes and 39 seconds. Here is a timing of the different
graph-depends steps and the overall execution time:

  Getting dependencies:   42.5735 seconds
  Turn deps into a dict:   0.0023 seconds
  Remove extra deps:     334.1542 seconds
  Get version:            22.4919 seconds
  Generate .dot:           0.0197 seconds

  real 6m39.289s
  user 6m16.644s
  sys 0m8.792s

By adding a very simple cache for the results of is_dep(), we bring
down the execution time of the "Remove extra deps" step from 334
seconds to just 4 seconds, reducing the overall execution time to 1
minutes and 10 seconds:

  Getting dependencies:  42.9546 seconds
  Turn deps into a dict:  0.0025 seconds
  Remove extra deps:      4.9643 seconds
  Get version:           22.1865 seconds
  Generate .dot:          0.0207 seconds

  real 1m10.201s
  user 0m47.716s
  sys 0m7.948s

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
[yann.morin.1998@free.fr:
  - rename is_dep() to is_dep_uncached(), keep existig code as-is
  - add is_dep() as a cached-version of is_dep_uncached()
  - use constructs more conform with 2to3
  - use exceptions (EAFP) rather than check-before-use (LBYL) to be more
    pythonist; that even decreases the duration yet a little bit more!
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

bcm2835: new package

[Thomas:
 - addition of 'depends on BR2_arm' as suggested by Yann.
 - addition of a comment in the Config.in help text that says that
   this library is a pure abomination.
 - fix the hash, since apparently upstream changes the released
   tarballs after they are published.
 - fix license, it's GPLv2, not GPLv2+.]

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mongoose: bump to version 6.1

- provide only libmongoose.a
- rework package description

[Peter: move under Libraries->Networking]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mke2img: set sparse_super for revision 1

The sparse_super feature is more efficient in terms of speed and
available space, so set it by default if supported, i.e. for revision 1.

This gives a huge speed gain for large resize2fs operations, especially
for expansion.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: fixing pre block indentation

Pre block should not be indented, this patch fixes wrong
indentation.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mysql: don't install libraries in /usr/lib/mysql directory

Installing libraries in a subdirectory of /usr/lib leads to no end of
trouble. It requires either setting a RUN_PATH in the ELF files linked
with it or adding the path to ld.so.conf and calling ldconfig on the
target.

So to simplify things, put everything in /usr/lib instead of
/usr/lib/mysql

[Thomas:
 - tweak commit title.
 - also remove ld.so.conf handling in mysql.mk, since it is no longer
   necessary.]

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-generic: detect incorrectly used package

In Buildroot, the selection of a package from a Config.in level and
from a Makefile level are completely disconnected. This can lead to
issues where the build of a package is triggered at the Makefile level
due to the package being listed in another package <pkg>_DEPENDENCIES
variable, even if that package is not enabled in the configuration.

This has for example been the case recently with python-can having
'python' in its <pkg>_DEPENDENCIES, while python-can could be enabled
when Python 3.x is used, in which case the 'python' package should not
be built.

To detect such issues more easily, this patch adds a check in the
package infrastructure. When the build process of a package is being
triggered, we verify that the package is enabled in the
configuration. We do this check in the "configure" step, since this
step is the first common step between the normal download case and the
"local site method" / "package override" case.

[Thomas: adjust the error message as suggested by Yann, to take into
account the fact that the problem might not be in a direct reverse
dependency, but in something higher up in the tree of reverse
dependencies.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

findutils: bump to version 4.6.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webchannel: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdriver_xf86-video-fbturbo: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add readme.txt for the orangepipc defconfig

[Thomas: minor tweaks.]

Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: update cubieboard2 defconfig

This patch updates the Cubieboard2 board defconfig to use newer u-boot
and linux versions, along with a few other improvements.
The other improvements were mostly backported from the recent Orange Pi
defconfig inclusion and are related to image generation.
linux-sunxi.org was used as a reference for both linux and u-boot
defconfig names.

In detail:
- Update linux to vanilla upstream -- currently 4.3.3 is the most
up-to-date. Although it lacks some features present only in the
linux-sunxi 3.4 branch, upstream support appears to be relatively mature
and is already being deployed by default by distributions such as Arch
Linux ARM.
- Update u-boot to vanilla upstream 2015.10. According to
linux-sunxi.org, upstream fully supports major functions (except NAND)
since 2015.07.
- Change image format to zImage and drop custom image generation script
in favour of genimage, as pointed out by reviewers in the Orange Pi
defconfig submission.

This was tested in a Cubieboard2 board with boot from mmc and it boots
fine to login prompt.

This has not been tested in a Cubieboard (A10) as I don't own any; the
version bumps probably apply to it although there are some differences
(lack of VFPv4 support, Cortex-A8 instead of Cortex-A7), so I have kept
the current Cubieboard defconfig and its scripts. This one has been only
build-tested.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sysstat: bump to version 11.2.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gettext: host variant needs host-libxml2

Of host-gettext, we only build the tools. however some of those tools
have a --color option, which needs libxml2.

If the libxml2 development files are missing on the host, a bundled
subset of libxml2 is used, and all seems OK. But if they ar epresent,
then the host libxml2 is used. On some distros, lbxml2 is linked with
liblzma. And if we happend to _then_ build our host-liblzma, we may have
a conflict later when trying to run any of the host-gettext tools.

Always build host-gettext with our own host-libxml2 which is not linked
with liblzma.

Fixes https://bugs.busybox.net/show_bug.cgi?id=7886

Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[nicolas: added extended commit message]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[yann.morin.1998@free.fr: rebase; add comment; enhance commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

unionfs: add patch to revert to old pre-1.0 meta directory

Unionfs changed its meta directory from .unionfs to .unionfs-fuse with the
unionfs -> unionfs-fuse rename.  The rename later got reverted everywhere
but the meta directory, so now unionfs doesn't find the whiteout files from
older releases.

Revert back to the pre-1.0 behaviour to fix this.

Patch merged upstream:
https://github.com/rpodgorny/unionfs-fuse/commit/93c2f9bd8b058b28016e6db2421e5b38eac0606c

[Thomas: add reference to the upstream commit, now that the patch has
been merged.]

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hiawatha: bump to version 10.0

Now uses the new mbedtls package, and requires zlib.
Rename the SSL option description to TLS, but keep the same symbol
name to avoid pointless legacy.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mbedtls: new package

Add the mbed TLS library, formerly known as PolarSSL.
The 2.0+ version can live side-by-side with polarssl since it was
renamed, hence can be added with no conflict.

Use the Apache-2.0 license variant since it's somewhat more flexible,
the codebase is the same as the GPLv2 variant, just copyright
headers/license file changed.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

subversion: add missing comment when building static

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sshfs: switch to github

The project moved to github, so point the homepage and download URL
there.

[Thomas:
  - Remove comment "Switch to github helper on bump" since we clearly
    don't want to switch to the github helper if they continue to
    upload release tarballs.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libfuse: switch to github

The project moved to github, so point the homepage and download URL
there.

[Thomas:
 - Remove comment "Switch to github helper on bump" since we clearly
   don't want to switch to the github helper if they continue to
   upload release tarballs.
 - Adjust comment in the .hash file for clarity.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdotool: new package

xdotool is a command-line X11 automation tool.

http://www.semicomplete.com/projects/xdotool

[Thomas:
 - fix <pkg>_LICENSE, as noticed by Baruch
 - use $(TARGET_MAKE_ENV).]

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gettext: bump to version 0.19.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

exfat-utils: bump to version 1.2.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

exfat: bump to version 1.2.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot: add COPY_OLD_LICENSE_FILE fix to rsync hook

make legal-info breaks when using an older u-boot version in local.mk
with OVERRIDE_SRCDIR, due to the reorganization of license files which
happened in u-boot v2013.10.
This issue had already been fixed in Buildroot for the regular use of
old u-boot versions (non-local.mk).
This patch adds the same fix to UBOOT_POST_RSYNC_HOOKS so that it also
covers the local.mk case.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

emlog: remove linux dependency

The dependency on linux is automatically added by the kernel-module
infrastructure, so there is no need to explicit add it in the emlog
package.

Thanks to Arnout for spotting the issue.

Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eventlog: add EVENTLOG_VERSION_MAJOR variable

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdriver_xf86-video-ati: fix dependencies

This package depends on the radeon driver from libdrm and depends on
DRI support in xserver_xorg-server, to achieve this we select the
Radeon mesa3d DRI driver.

Fixes:
http://autobuild.buildroot.net/results/9da/9da4ffdf1c4ec78ae37322e253cb769340116035

Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

assimp: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v1 -> v2:
  - use github helper (thanks to Jörg Krause)

Changes v2 -> v3:
  - add c++ dependency (suggested by Thomas Petazzoni)
  - fix linking problem with builtin zlib (linking code
    with/without '-fpic' compiled, see e.g. [2]), workaround by selecting
    buildroot zlib package (failure detected by Thomas Petazzoni [2])

[1] https://cmake.org/pipermail/cmake/2006-March/008482.html
[2] http://lists.busybox.net/pipermail/buildroot/2015-December/146859.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gtkmm3: disable for NiosII

Like for Qt GUI module, disable for niosII to avoid a toolchain issue
[1][2].

[1] http://lists.busybox.net/pipermail/buildroot/2015-December/148428.html
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=19405

Avoid:
http://autobuild.buildroot.net/results/3e2/3e2ad2de03b5e9f181332d06dcf860e51fcd47f8/

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gtkmm3: reorder select/depends

>From [1]:
"Even though the ordering has absolutely no consequences in Kconfig, it
is not logical (when reading). It is more logical and far easier to
understand when depends come first, followed by the selects."

Also, the Config.in exemple in the manual suggest to use this coding
style [2].

[1] http://lists.busybox.net/pipermail/buildroot/2015-October/142955.html
[2] http://buildroot.uclibc.org/downloads/manual/manual.html#writing-rules-config-in

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eigen: fix indentation

Use tabs consistently for indentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/eigen: install .pc file

Other packages will look for eigen3.pc to detect the presence of eigen3.

eigen3.pc is usually installed by eigen's cmake buildsystem, but we do a
manual install to not depend on host-cmake just to install header files.
But in doing so, we forgot to install the .pc file.

Manually sed the source .pc.in to generate the final .pc file.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libasplib: new package

Needed for upcoming kodi-adsp-biquad-filters package

[Thomas:
  - add dependency on i386 || x86-64 since the <cpuid.h> header is
    needed
  - add hash file.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: new orangepipc_defconfig

This commit adds a configuration for the Orange Pi PC board,
<http://www.orangepi.org/orangepipc/>.

Signed-off-by: Eelco Chaudron <echaudron@xiot.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/udpcast: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/tcl: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/nodejs: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/gstreamer1: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

In this case, it means the gstremaer1 plugins are not indented below the
main gstreamer1 prompt.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/gstreamer: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol and
its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

In this case, it means the gstremaer plugins are not indented below
the main gstreamer prompt.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/alsa-lib: move comment around, to keep proper indentation

In Kconfig, when there is an item (like a comment) between a symbol
and its dependees, then the indentation is not in effect.

Move the symbol to the top of the file to guarantee the indentation in
menuconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/connman: cleanup backtrace patch

connman uses execinfo.h to dump a backtrace in case of failure.
execinfo.h is optional in uClibc, so we had a patch that conditonally
disabled backtraces for uClibc when it was missing execinfo.h

However, musl is also entirely lacking execinfo.h.

Add a proper patch that checks for execinfo.h at ./configure time. This
will no longer make any assumption on the C library that is being used.

Fixes:
    http://autobuild.buildroot.org/results/f6e/f6ee8ab3a6300f1f527f9e92b8c2ec81e63afb27/
    http://autobuild.buildroot.org/results/96b/96b78bb644ed4ef3493782521b17e3b2113a405f/
    ...

Note that there might be other issues with musl; this patch only fixes
the execinfo.h one.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

autofs: not available on static

Uses dlfcn & friends, fixes:
http://autobuild.buildroot.net/results/2f2/2f2dcf8d2af961c0401a4b39f96cefe691a4479b/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libjpeg-turbo: bump to version 1.4.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nasm: bump to version 2.11.08

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

start-stop-daemon: bump to version 1.18.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsecret: add patch to fix .pc file for static linking

The .pc file of libsecret needs to be adjusted to account for its
optional dependency on the gcrypt library. The patch has been
submitted upstream for inclusion.

Fixes:

  http://autobuild.buildroot.org/results/c2c/c2c6185cfbd9a0c91266c9e8a5f4221afb14930f/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pinentry: optionally depend on libsecret

pinentry can use libsecret when available, so we should handle this
optional dependencies properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pinentry: add host-pkgconf dependency

pinentry configure.ac uses PKG_CHECK_MODULES() and also manual calls
to pkg-config, to detect the availability of some libraries, so we
need to depend on host-pkgconf.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vboot-utils: add missing dependency on host-util-linux

vboot-utils needs uuid.h and libuuid for the cgpt tool, so we need to
depend on host-util-linux.

Fixes:

  http://autobuild.buildroot.org/results/ee1/ee18202cb6d7751178617e6a3d0bc97e65318aa9/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: granular choice for stack protector

Currently, we only support two levels of stach-smashing protection:
  - entirely disabled,
  - protect _all_ functions with -fstack-protector-all.

-fstack-protector-all tends to be far too aggressive and impacts
performance too much to be worth on a real product.

Add a choice that allows us to select between different levels of
stack-smashing protection:
  - none
  - basic   (NEW)
  - strong  (NEW)
  - all

The differences are documented in the GCC online documentation:
    https://gcc.gnu.org/onlinedocs/gcc-4.9.2/gcc/Optimize-Options.html

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
[yann.morin.1998@free.fr:
  - rebase
  - add legacy handling
  - SSP-strong depends on gcc >= 4.9
  - slightly simple ifeq-block in package/Makefile.in
  - keep the comment in the choice; add a comment shen strong is not
    available
  - drop the defaults (only keep the legacy)
  - update commit log
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
 - only show the choice if the toolchain has SSP support
 - add details for the BR2_SSP_ALL option that it has a significant
   performance impact.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ustr: not available for static-only configurations

ustr now unconditionally builds a shared library, so we have to mark
it as not available for static-only builds. The only reverse
dependencies of ustr is libsemanage, which was anyway already not
available for pure static builds.

Fixes:

  http://autobuild.buildroot.org/results/734/734975f6ac041e8aece07205c0b8966fe51e7df1/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

stunnel: use BR2_TOOLCHAIN_HAS_SSP instead of BR2_ENABLE_SSP

All packages use BR2_TOOLCHAIN_HAS_SSP to determine whether they can
use SSP suppport or not, except stunnel. Therefore, this commit makes
stunnel consistent with other packages. This is also necessary in
preparation to the removal of BR2_ENABLE_SSP in favor of a choice
between various SSP options.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: add help text to BR2_ARM_ENABLE_VFP

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: Arago armv7 toolchain really requires a VFPv3

The Arago armv7 toolchain really requires a VFPv3 unit, so only expose
it to the user when the CPU actually has such a VFP unit

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: only expose VFP in FP strategy when the CPU *has* a VFP unit

There's no point in offering the user an option to select an FP strategy
when the CPU does not actually have a VFP unit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: only expose EABIhf when the CPU *has* a VFP unit

There's no point in offering the user an option to select EABIhf when
the CPU does not really have a VFP unit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: add option to enable an optional VFP unit

Currently, the VFP selection for ARM is a little bit muddy:
  - some CPUs definitely do not have a VFP or NEON,
  - some CPUs definitely do have a VFP or NEON,
  - some CPUs may have a VFP or NEON.

However, we currently conflate the availability of the VFP/NEON with the
possibility to use them. Even is the user chooses a floating point
strategy with a 'lower' solution (i.e. VFPv2 when a VFPv3 exists, or not
using NEON when the CPU has it), some packages are still using the
CPU-defined HW availaibility rather thean the usr's selection.

Furthermore, for CPU that may have a VFP/NEON, there is no way for the
user to actually specify that the HW is indeed available; the user can
only specify the floating point strategy. This means that some packages
or some package versions, like nodejs for example, can not be properly
selected on some CPU cores, like Cortex-A9 which only may have a VFP.

Like we have an option to enable an optional NEON unit, add a similar
option to enable an optional VFP unit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: reorder NEON option

Stating whether to use the NEON extensions when it is optional in the
CPU really is completing the definition of the CPU we've just selected.

Move the ENABLE_NEON option just after the choice of the CPU variant,
and before any "software" option (ABI/VFP).

This will make sense in a moment, when we introduce a similar option for
enabling an optional VFP unit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>