* scripttempl/elf.sc (RODATA_NAME, SDATA_NAME, SBSS_NAME,
BSS_NAME): Define if not already defined.  Use in place of some
hardcoded section names.

* gas/macros/dot.s: Remove space in .byte operands.

* dis-buf.c (buffer_read_memory): Give error for reading just
before the start of memory.

* symcat.h (CONCAT5, CONCAT6, XCONCAT5, XCONCAT6): Define.

Merge from gcc:
2010-03-19  Jack Howarth <howarth@bromo.med.uc.edu>
PR ada/42554
* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
* configure: Regenerate.

* config.sub: Update to version 2010-03-22.
* config.guess: Update to version 2009-12-30.

2010-03-22  Sebastian Pop  <sebastian.pop@amd.com>
    Quentin Neill <quentin.neill@amd.com>

opcodes/
* i386-dis.c (OP_LWP_I): Removed.
(reg_table): Do not use OP_LWP_I, use Iq.
(OP_LWPCB_E): Remove use of names16.
(OP_LWP_E): Same.
* i386-opc.tbl: Removed 16bit LWP insns.  32bit LWP insns
should not set the Vex.length bit.
* i386-tbl.h: Regenerated.

gas/
* testsuite/gas/i386/x86-64-lwp.s: Remove use of 16bit LWP insns.
* testsuite/gas/i386/lwp.s: Same.
* testsuite/gas/i386/x86-64-lwp.d: Updated.
* testsuite/gas/i386/lwp.d: Updated.

*** empty log message ***

sim: always enable support for the --endian option

The gdb code always passes down -E <little|big> to the sim core when using
the sim target.  But the sim core only recognizes this option when the sim
supports big endian systems.  So for little endian simulators, any attempt
to use the sim target fails with:

(gdb) target sim
gdbsim: invalid option -- 'E'
unable to create simulator instance

Since always respecting the option doesn't cause any problems, do just
that.  If someone tries to use an invalid endian, they'll get an error
anyways.

daily update

2010-03-22  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relocate_functions::abs8,
Arm_relocate_functions::abs16): Use correct check for overflow
specified in the ARM ELF specs.
(Arm_relocate_functions): thumb_branch_common.  Handle bit 1 of branch
target of a BLX instruction specially.
(Reloc_stub::stub_type_for_reloc): Ditto.
(Relocate::relocate): Use symbolic names instead of numeric relocation
codes to report error.
(Target_arm::do_relox): Reduce default stub-group size for Cortex-A8
workaround.
* testsuite/Makefile.am (check_DATA): add thumb_blx_in_range.stdout,
thumb_blx_out_of_range.stdout, thumb2_blx_in_range.stdout and
thumb2_blx_out_of_range.stdout
(thumb_bl_out_of_range, thumb_bl_out_of_range.o,
thumb2_bl_out_of_range, thumb2_bl_out_of_range.o): Fix dependenices.
(thumb_blx_in_range.stdout, thumb_blx_in_range, thumb_blx_in_range.o,
thumb_blx_out_of_range.stdout, thumb_blx_out_of_range,
thumb_blx_out_of_range.o, thumb2_blx_in_range.stdout,
thumb2_blx_in_range, thumb2_blx_in_range.o,
thumb2_blx_out_of_range.stdout, thumb2_blx_out_of_range,
thumb2_blx_out_of_range.o): New rules.
  (MOSTLYCLEANFILES): Add thumb_blx_in_range, thumb_blx_out_of_range,
thumb2_blx_in_range and thumb2_blx_out_of_range.
* testsuite/Makefile.in: Regenerate.
* arm_branch_in_range.sh: Add tests for THUMB BLX.
* testsuite/thumb_blx_in_range.s: New file.
* testsuite/thumb_blx_out_of_range.s: New file.

merge from gcc

gdb/testsuite/
* dg-extract-results.sh: Sync with GCC HEAD (import r155655, r157175
and r157645).

2010-03-22  Stan Shebs  <stan@codesourcery.com>

* value.c (value_static_field): Be lazy about the field's value.

2010-03-22  Reid Kleckner  <reid@kleckner.net>

PR gdb/11094
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add
bp_jit_event.
(disable_breakpoints_in_shlibs): Likewise.

gdb/testsuite/
* gdb.dwarf2/dw2-empty-namespace.exp, gdb.dwarf2/dw2-empty-namespace.S:
New.

* gdb.python/Makefile.in (EXECUTABLES): Add py-mi.
* gdb.python/py-mi.exp (binfile): Rename to py-mi.

2010-03-22  Rafael Espindola  <espindola@google.com>

* archive.cc (Should_include): Move to archive.h.
(should_include_member): Make it a member of Archive.
(Lib_group): New.
(Add_lib_group_symbols): New.
* archive.h: Include options.h.
(Archive_member): Moved from Archive.
(Should_include): Moved from archive.cc.
(Lib_group): New.
(Add_lib_group_symbols): New.
* dynobj.cc (do_should_include_member): New.
* dynobj.h (do_should_include_member): New.
* gold.cc (queue_initial_tasks): Update call to queue.
* main.cc (main): Print lib group stats.
* object.cc (do_should_include_member): New.
* object.h: Include archive.h.
(Object::should_include_member): New.
(Object::do_should_include_member): New.
(Sized_relobj::do_should_include_member): New.
* options.cc (General_options::parse_start_lib): New.
(General_options::parse_end_lib): New.
(Input_arguments::add_file): Handle lib groups.
(Input_arguments::start_group): Check we are not in a lib.
(Input_arguments::start_lib): New.
(Input_arguments::end_lib): New.
* options.h (General_options): Add start_lib and end_lib.
(Input_argument::lib_): New.
(Input_argument::lib): New.
(Input_argument::is_lib): New.
(Input_file_lib): New.
(Input_arguments::in_lib_): New.
(Input_arguments::in_lib): New.
(Input_arguments::start_lib): New.
(Input_arguments::end_lib_): New.
* plugin.cc (Pluginobj::get_symbol_resolution_info): Mark symbols
in unused members as preempted.
(Sized_pluginobj::do_should_include_member): New.
* plugin.h (Sized_pluginobj::do_should_include_member): New.
* readsyms.cc (Read_symbols::locks): If we are just reading a member,
return the blocker.
(Read_symbols::do_whole_lib_group): New.
(Read_symbols::do_lib_group): New.
(Read_symbols::do_read_symbols): Handle lib groups.
(Read_symbols::get_name): Handle lib groups.
* readsyms.h (Read_symbols): Add an archive member pointer.
(Read_symbols::do_whole_lib_group): New.
(Read_symbols::do_lib_group): New.
(Read_symbols::member_): New.
* script.cc (read_input_script): Update call to queue_soon.

Use STRING_COMMA_LEN to avoid strlen.

2010-03-22  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (lex_got): Use STRING_COMMA_LEN on gotrel.

* dwarf2read.c (partial_die_parent_scope): Work around buggy
GCC 4.1 debug info generation (GCC PR c++/28460).
(determine_prefix): Likewise.

Replace oprand_size_mismatch with operand_size_mismatch.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (i386_error): Replace oprand_size_mismatch
with operand_size_mismatch.
(operand_size_match): Updated.
(match_template): Likewise.

Set error instead of err_msg on failure.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (i386_error): New.
(_i386_insn): Replace err_msg with error.
(operand_size_match): Set error instead of err_msg on failure.
(operand_type_match): Likewise.
(operand_type_register_match): Likewise.
(VEX_check_operands): Likewise.
(match_template): Likewise.  Use error instead of err_msg with
as_bad.

*** empty log message ***

Check !executable instead of shared for PIE.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11413
* elflink.c (_bfd_elf_add_default_symbol): Check !executable
instead of shared.

daily update

*** empty log message ***

daily update

* tui/tui-disasm.c (tui_get_begin_asm_address): Default to
get_current_arch.
* tui/tui-layout.c (extract_display_start_addr): Likewise.

*** empty log message ***

daily update

2010-03-19  Stan Shebs  <stan@codesourcery.com>

* ax-gdb.c (gen_fetch): Handle bool.
(gen_usual_unary): Ditto.
(gen_cast): Ditto.
(gen_equal): New function.
(gen_less): New function.
(gen_expr_binop_rest): Call them, also return integer type from
logical operations.
(gen_expr): Ditto.

* gdb.trace/ax.exp: New file.

2010-03-19  Doug Kwan  <dougkwan@google.com>

* arm.cc (Stub_table::Stub_table): Initialize new data members
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_.
(Stub_table::add_reloc_stub): Assign stub offset and update
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_.
(Stub_table::reloc_stubs_size_, Stub_table::reloc_stubs_addralign_):
New data members.
  (Stub_table::update_data_size_and_addralign): Use
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_
instead of going over all reloc stubs.
  (Stub_table::finalize_stubs): Do not assign reloc stub offsets.
* stringpool.cc (Stringpool_template::Stringpool_template): Initialize
Stringpool_template::offset_ to size of Stringpool_char.
  (Stringpool_template::new_key_offset): Remove code to initialize
Stringpool_template::offset_.
* stringpool.h (Stringpool_template::set_no_zero_null): Set
Stringpool_template::offset_ to zero.

* jv-lang.c (jv_dynamics_objfile_data_key)
(jv_type_objfile_data_key): New globals.
(class_symtab): Move earlier.
(jv_per_objfile_free): New function.
(get_dynamics_objfile): Call set_objfile_data.  Add 'gdbarch'
parameter.
Remove ancient #if 1.
(add_class_symbol): Remove redundant declaration.
(java_lookup_class): Use alloc_type, not alloc_type_arch.
(java_link_class_type): Mark as static.  Update.
(jv_clear_object_type): New function.
(set_java_object_type): Likewise.
(get_java_object_type): Use set_java_object_type.
(is_object_type): Likewise.
(_initialize_java_language): Register new objfile keys.
(get_java_class_symtab): Add 'gdbarch' parameter.
(add_class_symtab_symbol): Update.
(type_from_class): Update.

2010-03-19  Stan Shebs  <stan@codesourcery.com>

* ax-general.c (ax_const_l): Fix a sizing bug.

* lib/gdb.exp (gdb_compile_test): Watch for "compiler not installed"
output from gcc.

* gdb.base/break-interp.exp (prelinkNO): Handle prelink binaries
named /usr/sbin/prelink<foo>.

* elf32-arm.c (struct section_list): Remove.
(section_list): Remove typedef.
(record_section_with_arm_elf_section_data): Remove.
(find_arm_elf_section_entry): Remove.
(get_arm_elf_section_data): Use is_arm_elf.
(unrecord_section_with_arm_elf_section_data): Remove.
(elf32_arm_new_section_hook): Don't call
record_section_with_arm_elf_section_data.
(elf32_arm_write_section): Set mapcount to -1 when
the map has been used. Don't call
unrecord_section_with_arm_elf_section_data.
(unrecord_section_via_map_over_sections): Remove.
(elf32_arm_close_and_cleanup): Remove.
(elf32_arm_bfd_free_cached_info): Remove.
(bfd_elf32_close_and_cleanup): Don't define.
(bfd_elf32_bfd_free_cached_info): Don't define.

PR ld/11304
* ld-elf/pr11304.d: New test.
* ld-elf/pr11304a.s: New test.
* ld-elf/pr11304b.s: New test.
* lib/ld-lib.exp (regexp_diff): Add support for #failif.

* config/tc-arm.c (make_mapping_symbol): Hanle the case
that two mapping symbols have the same value.

testsuite/
* gas/arm/mapmisc.s: Add the test case for two mapping
symbols having the same value.
* gas/arm/mapmisc.d: Likewise.

*** empty log message ***

daily update

GDB 7.1 released.

2010-03-18  Stan Shebs  <stan@codesourcery.com>
    Pedro Alves  <pedro@codesourcery.com>

* target.h (struct target_ops): New method
to_set_circular_trace_buffer.
(target_set_circular_trace_buffer): New macro.
* target.c (update_current_target): Add
to_set_circular_trace_buffer, fix to_set_disconnected_tracing
default behavior.
* remote.c (remote_set_circular_trace_buffer): New function.
(init_remote_ops): Add it to vector.
* tracepoint.h (struct trace_status): New field traceframes_created,
change buffer_size and buffer_free to int.
* tracepoint.c (circular_trace_buffer): New global.
(start_tracing): Send values of disconnected tracing and circular
trace buffer settings.
(set_circular_trace_buffer): New function.
(parse_trace_state): Handle total space and frames created.
(trace_status_command): Display total space and total frames
created.
(trace_save): Write out new status values.
(parse_trace_status): Set traceframe_count, traceframes_created,
buffer_free and buffer_size to -1 by default.
(_initialize_tracepoint): New setshow for circular-trace-buffer.
* NEWS: Mention the circular trace buffer option.

* gdb.texinfo (Starting and Stopping Trace Experiments): Describe
circular-trace-buffer.
(Tracepoint Packets): Describe QTBuffer, and details of the
qTStatus reply.

* gdb.trace/circ.exp: Test circular-trace-buffer.
* gdb.trace/tfile.exp: Update tstatus test.

Re-indent INIT_ARRAY.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

* scripttempl/elf.sc (INIT_ARRAY): Re-indent.

[dwarf] Anonymous nested function causes SEGV during psymbol read

According to the DWARF3 standard, a function always has a name attribute
(Section 3.3 - Subroutine and Entry Point Entries).  The only exception
is when a DW_AT_abstract_origin attribute is provided, in which case
the name may be inherited from the referenced DIE.

The problem occured because our compiler generated a subprogram DIE
for a nested function where the name attribute was missing (and no
abstract-origin either).  Our code in add_partial_symbol is not
prepared to deal with the situation, and happily just tries  to compute
the length of the (NULL) function name.

This normally cannot happen, because there is already a guard in
scan_partial_symbols, where we (silently!) ignore anonymous dies,
including anonymous subprograms. Unfortunately, there is a flaw that
affects Ada and other languages that allow nested subprograms. For
nested subprograms, we do not go through scan_partial_symbols and
thus we are missing the name check.

This patch adds the name check in the nested subprogram case. It also
adds a complaint which is emitted during the psymtab->symtab conversion
phase.

gdb/ChangeLog:

        * dwarf2read.c (add_partial_subprogram): Make sure the subprogram
        DIE has a name before creating the associated partial symbol.
        (read_func_scope): Emit a complaint if the subprogram does not
        have a name or when we can't extract the subprogram PC bounds.

gdb/testsuite/ChangeLog:

        * gdb.dwarf2/dw2-anonymous-func.S: New file.
        * gdb.dwarf2/dw2-anonymous-func.exp: New testcase.

Tested on x86_64-linux, no regression.  Note that the testcase also
verifies that the psymtab->symtab conversion does not crash (this is
the purpose of the "list file1.txt:1" test.

Reformat.

* infcmd.c (finish_command_continuation): Wrap print_return_value
in TRY_CATCH.

Avoid buffer overflow.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

* readelf.c (decode_arm_unwind): Increase buf size to 9 byte.

Fix last checkin

* doc/c-arm.texi (.setfp): Correct example.

Move ChangeLog entries to proper place.

ChangeLog:

* mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch
instead of selected frame architecture.

testsuite/ChangeLog:

* gdb.mi/gdb680.exp: Revert 2009-06-17 change.

gdb/
* infcmd.c (until_command): Use ERROR_NO_INFERIOR.  Ensure there's
a valid selected thread, and that it is not running.
(advance_command): Ditto.
(finish_command): Ditto.

gdb/testsuite/
* gdb.base/default.exp: Adjust.

    PR ld/11384
        * emultempl/sh64elf.em: Add missing EOF.

Don't add IMAGE_FILE_RELOCS_STRIPPED for PIE.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/11396
* libcoff-in.h (pe_tdata): Add dont_strip_reloc.
* libcoff.h: Regenerated.

* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Clear F_RELFLG
if dont_strip_reloc is set.
(_bfd_XX_bfd_copy_private_bfd_data_common): Set
dont_strip_reloc on output if there is no .reloc and
IMAGE_FILE_RELOCS_STRIPPED isn't set in input.

bfd/
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * bfd-in2.h (enum bfd_reloc_code_real): New BFD_RELOC_GOT_PREL type.
       * elf32-arm.c (elf32_arm_reloc_map): BFD_RELOC_GOT_PREL to
       R_ARM_GOT_PREL map.
       * libbfd.h (bfd_reloc_code_real_names): BFD_RELOC_GOT_PREL name.
       * reloc.c (comments): Document the new relocation.

gas/
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * config/tc-arm.c (reloc_names): New relocation names.
       (md_apply_fix): New case for BFD_RELOC_ARM_GOT_PREL.
       (tc_gen_reloc): New case for BFD_RELOC_ARM_GOT_PREL.
       * doc/c-arm.texi (ARM-Relocations): Document the new relocation.

gas/testsuite
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * gas/arm/got_prel.s: New test case.
       * gas/arm/got_prel.d: Likewise.

    * pe-dll.c (make_one): Make text section readonly.
        (make_one): Add *ABS* symbol @feat.00 with value 1 to tag
        the jump stub on X86 as /SAFESEH compatible for
        native toolchains.

2010-03-17 Stan Shebs  <stan@codesourcery.com>

* ax-gdb.c (require_rvalue): Disallow non-scalars.

2010-03-17 Stan Shebs  <stan@codesourcery.com>

* infcall.c: Include tracepoint.h.
(call_function_by_hand): Disallow calls in tfind mode.
* infcmd.c: Include tracepoint.h.
(ensure_not_tfind_mode): New function.
(continue_1): Call it.
(step_1) Ditto.
(jump_command): Ditto.
(signal_command): Ditto.
(advance_command): Ditto.
(until_command): Ditto.
(finish_command): Ditto.
* tracepoint.h (disconnect_or_stop_tracing): Declare.

*** empty log message ***

Run list-1, list-2 and list-3 only for ELF tagets.

2010-03-17  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run list-1, list-2 and list-3 only for
ELF tagets.

daily update

Revert accidental changes.

2010-03-17  H.J. Lu  <hongjiu.lu@intel.com>

* reloc.c (BFD_RELOC_SPU_PIC18): Removed.
(BFD_RELOC_SPU_STUB): Likewise.

2010-03-17 Stan Shebs  <stan@codesourcery.com>

* ax-gdb.h (struct axs_value): New field optimized_out.
(gen_trace_for_var): Add gdbarch argument.
* ax-gdb.c (gen_trace_static_fields): New function.
(gen_traced_pop): Call it, add gdbarch argument.
(gen_trace_for_expr): Update call to it.
(gen_trace_for_var): Ditto, and report optimized-out variables.
(gen_struct_ref_recursive): Check for optimized-out value.
(gen_struct_elt_for_reference): Ditto.
(gen_static_field): Pass gdbarch instead of expression, assume
optimization if field not found.
(gen_var_ref): Set the optimized_out flag.
(gen_expr): Error on optimized-out variable.
* tracepoint.c (collect_symbol): Handle struct-valued vars as
expressions, skip optimized-out variables with computed locations.
* dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
erroring out if location expression missing.
(loclist_tracepoint_var_ref): Don't error out here.

* dwarf2read.c (dwarf2_get_section_info): Handle case where no
DWARF data is available.

* symfile.c (generic_load): Reset breakpoints after loading.

* linux-nat.c (linux_nat_detach): Check debug_linux_nat.

Avoid overflow.

2010-03-17  Jie Zhang  <jie@codesourcery.com>

* elf.c (assign_file_positions_for_load_sections): Avoid
overflow.

gdb/
* spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the
create_breakpoint call, adjust the parameters.

* plugin.c (bfd_plugin_object_p): Pass iostream to fileno using
proper type.

rename files

* ldlang.c (lang_size_sections_1): Remove "s" param.  Set "s" from
*prev instead.  Update all callers.

warning fixes

*** empty log message ***

daily update

sim: avoid TRACE redefine warnings

The common code sets up an autoconf option --enable-sim-trace which adds
-DTRACE= to CPPFLAGS.  This causes warnings in the building of some files
that declare a local TRACE() helper macro.  So punt it from hw-ports.c
(since it isn't actually used) and convert hw-properties.c to HW_TRACE().

gdb/
* dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED.
* valarith.c (value_subscripted_rvalue): Suppress error if
TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED.

Avoid switch to invalid ptid during Ada task switch.

This is to prevent an internal error during an Ada task switch. A task
switch is simply a thread switch under the hood. What we do is collect
the info from the Ada Task Control Block, deduce the associated thread
ptid, and then switch to that thread.  If the thread ptid computation
routine has not been implemented for the target, of if there is a bug,
then we end up computing a bogus ptid which GDB does not know about,
which eventually leads to an assertion failure:

    (gdb) task 1
    [New Thread 5715]
    /[...]/gdb/thread.c:595: internal-error: is_thread_state:
     Assertion `tp' failed.
    A problem internal to GDB has been detected,
    further debugging may prove unreliable.
    Quit this debugging session? (y or n)

When this happens, it's just nicer for the user to print an error
message, and cancel the task switch. After this patch is applied,
this is what we get:

    (gdb) task 1
    [New Thread 10250]
    Unable to compute thread ID for task 1.
    Cannot switch to this task.

gdb/ChangeLog:

        * ada-tasks.c (task_command_1): Check that the task ptid is valid
        before doing the associated thread switch.

2010-03-16  Segher Boessenkool  <segher@kernel.crashing.org>

        * gmon_io.c (gmon_out_read): Close file when done.

gdb/gdbserver/
* server.h (internal_error): Declare.
(gdb_assert, ASSERT_FUNCTION, gdb_assert_fail): Define.
* utils.c (internal_error): New function.

2010-03-16  Holger Hans Peter Freyther  <zecke@selfish.org>

* linux-record.c (record_linux_msghdr): Remove unintended semicolons.

Add missing newline.

* ldlang.c (lang_insert_orphan): Place loadable orphans in the same
region and phdrs as their placement section.

testsuite/
* ld-elf/orphan-region.d, ld-elf/orphan-region.ld,
ld-elf/orphan-region.s: New files.

* MAINTAINERS: Update my email address.  List Tristan Gingold
as the release branch maintainer.

* MAINTAINERS: Update my email address.

Simplify MI breakpoint setting.

     * breakpoint.c (break_command_really): Make nonstatic and
     rename to...
     (create_breakpoint): ...this. Rename prior function by this name
     to...
     (create_breakpoint_sal): ...this.
     (create_breakpoints): Rename to...
     (create_breakpoints_sal): ...this.
     (set_breakpoint): Remove.
     * breakpoint.h: Adjust to above changes.
     * mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify.

2010-03-15  Doug Kwan  <dougkwan@google.com>

* stringpool.cc (Stringpool_template::Stringpool_template): Initialize
offset_.
(Stringpool_template::new_key_offset): New method.
(Stringpool_template::add_string): Assign offsets when adding new
strings.
(Stringpool_template::set_string_offsets): Do not set string offsets
when not optimizing.
* stringpool.h (Chunked_vector::Chunked_vector): Initialize data
member size_.
    (Chunked_vector::clear): Clear size_.
    (Chunked_vector::reserve): Call reserve method of all Element_vectors.
    (Chunked_vector::size): Return size_.
    (Chunked_vector::push_back): Use size_ to find insert position.
(Chunked_vector::size_): New data member.
(Stringpool_template::set_no_zero_null): Assert string set is empty.
(Stringpool_template::new_key_offset): New method declaration.
(Stringpool_template::offset_): New data member.

Fix a commit snafu

* elf64-ppc.c (struct ppc_link_hash_table): Add do_toc_opt.
(ppc64_elf_edit_toc): Set it here.
(ha_reloc_match): New function.
(ppc64_elf_relocate_section): Optimize bigtoc insn sequences.

*** empty log message ***

2010-03-15 Stan Shebs  <stan@codesourcery.com>

* ax-gdb.c: Include cp-support.h.
(find_field): Remove.
(gen_primitive_field): New function.
(gen_struct_ref_recursive): New function.
(gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
of find_field.
(gen_static_field): New function.
(gen_struct_elt_for_reference): New.
(gen_namespace_elt): New.
(gen_maybe_namespace_elt): New.
(gen_aggregate_elt_ref): New.
(gen_expr): Add OP_SCOPE, display opcode name in error message.

daily update

* dwarf2read.c (die_needs_namespace): Also return 0 for
DW_TAG_subprogram.

merge from gcc

Requalify Ralf Corsepius' change as a "tiny change".

Ralf's copyright assignment does not cover GDB for the moment.
He only contributed one other change, in 2005, so this should be fine.

2010-03-15  Sami Wagiaalla  <swagiaal@redhat.com>

        PR c++/7936:
        * cp-support.h: Added char *declaration element to using_direct
        data struct.
        (cp_add_using): Added char *declaration argument.
        (cp_add_using_directive): Ditto.
        (cp_lookup_symbol_imports): made extern.
        * cp-namespace.c: Updated with the above changes.
        * dwarf2read.c (read_import_statement): Ditto.
        (read_namespace): Ditto.
        (read_import_statement): Support import declarations.
        * cp-namespace.c (cp_lookup_symbol_imports): Check for imported
        declarations.
        Added support for 'declaration_only' search.
        (cp_lookup_symbol_namespace): Attempt to search for the name as
        is before consideration of imports.
        * symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
        search at every block level search.
        Now takes language argument.
        (lookup_symbol_aux): Updated.

    2010-03-15  Sami Wagiaalla  <swagiaal@redhat.com>

        * gdb.cp/shadow.exp: Removed kfail; test has been fix.
        * gdb.cp/nsusing.exp: Ditto.

gdb
* c-exp.y (name_not_typename): Add 'operator' clause.
gdb/testsuite
* gdb.cp/userdef.exp: Add tests for explicit calls to operator==.
* gdb.cp/userdef.cc (operator==): New function.
(main): New locals mem1, mem2.

Fix date in latest entry.

Fail gdb configure if target is not supported.

        * configure.ac: Exit if ${gdb_target_obs}" is not set.
        * configure: Regenerate.

* configure.srv: Fix typo setting srv_regobj.