webrtc-audio-processing: fix build on ARM Cortex-M

The webrtc-audio-processing configure script assumes that if the
host_cpu part of the tuple is "arm", then ARM instructions are
available. This is obviously incorrect for ARM Cortex-M platforms, which
only support the Thumb-2 instruction set.

In order to address this, we add a patch,
0001-configure.ac-fix-architecture-detection.patch, which changes how
webrtc-audio-processing detects the architecture: instead of relying on
the host_cpu part of the tuple, it relies on the built-in definitions of
the compiler.

Not only it fixes the Cortex-M detection, but it also enables ARMv7
optimizations on ARMv7-A: until now they were only enabled when the
host_cpu part of the tuple was armv7, which is never the case in
Buildroot.

However, once this issue is fixed for Cortex-M, the build nonetheless
fails later due to the usage of NPTL-only functions. So we change the
thread dependency to a NPTL dependency.

Fixes:

  http://autobuild.buildroot.net/results/4933082cd7cc5781404c77ccef5c2b9333c5f714/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: fix patch naming convention

Otherwise conflicts with the naming convention from previous section.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnuradio: backport patch to fix gr-fec compilation

Fix:
http://autobuild.buildroot.net/results/f14/f14f4f62b5f23c652fa9411d9c569c2ab3394fb5

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-imx: fix V4L2 plugin build with kernel headers < 3.18

This patch fix the following build issue:
http://autobuild.buildroot.net/results/b46/b460a770c8f4e992d29dde8fe37fc23a949937f2

It has been submitted to the package maintainers:
https://github.com/Freescale/gstreamer-imx/pull/106

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

size-stats: fix bug when parsing file names with comma

The size-stats script fails when the usb_modeswitch_data is enabled,
because this package installs files that contain commas in their
name. However, the size-stats script also uses comma as a separator for
its CSV files, causing a "ValueError: too many values to unpack" in:

  pkg, fpath = l.split(",")

Fix this by splitting only the two fields that need to be split.

The bug was reported by Matthias <porto.rio@gmx.net>, who also suggested
a fix.

Fixes bug #9136.

Reported-by: Matthias <porto.rio@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: Fix missing runtime Qt3Support dependency

Qt3Support module has a runtime dependency on QtSql, see
https://wiki.qt.io/Qt_Library_Cross_Dependencies. This patch fix this
issue.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt: fix build with ALSA >= 1.1.x

ALSA > 1.1.x are not determined correctly when configuring the library.
A patch, identical to the one used for Qt5, is added to the qt package
to solve this problem.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

owfs: disable PHP support

Since we upgraded PHP to PHP 7.x, the PHP support of OWFS started
failing to build. Since we can hardly fix that on our own, the issue was
reported upstream (https://sourceforge.net/p/owfs/support-requests/32/)
and for now, we will disable PHP support in OWFS.

Fixes:

  http://autobuild.buildroot.net/results/fe6843ec53fbed452d2e38a8577a235f73abb8db/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netplug: add two patches to fix musl build issues

This commit adds two patches to netplug that are needed for this package
to build with musl:

 - One patch to add a missing header inclusion
 - One patch to fix a conflicting prototype on __assert_fail().

Fixes:

  http://autobuild.buildroot.net/results/c2a5dfedba46cc8eb3d0c5c43f1f76fe0bb1805f/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

thrift: fix m68k uclinux compile

The GCC manual suggest when getting:
relocation truncated to fit: R_68K_GOT16O foobar
to use -mxgot.

The failures happens after gnuplot compiles.

Fixes:
  http://autobuild.buildroot.net/results/d1e030c42f43f49575f36ecc82e9dd9018ca4f73/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnuplot: fix m68k uclinux compile

The GCC manual suggest when getting:
relocation truncated to fit: R_68K_GOT16O foobar
to use -mxgot.

Fixes:
  http://autobuild.buildroot.net/results/d1e030c42f43f49575f36ecc82e9dd9018ca4f73/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cairo: fix m68k uclinux compile

The GCC manual suggest when getting:
relocation truncated to fit: R_68K_GOT16O foobar
to use -mxgot.

Fixes:
  http://autobuild.buildroot.net/results/31a488316fe3c14729a6dd9259205f8530684cab/
  http://autobuild.buildroot.net/results/dc6b899e3e502d65b2cf2f6d922a4f63857edf82/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/uclibc: add upstream patch to fix Thumb2 builds

When uClibc-ng 1.0.17 was released, there was a regression when building
Thumb2-only for a CPU that is capable of running in arm mode (e.g. an
armv7a cpu).

We hastily added a patch to revert the upstream commit, as a stop-gap
measure, waiting for the actual fix.

That actual fix is there, now. :-)

Drop our revert-patch, and add the upstream patch.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/bdwgc: fix pthread detection on uclinux platforms

bdwgc does not recognize "uclinux" as a valid OS part of the target
tuple which is used by some arm cortex-M toolchains.

Fixes:
http://autobuild.buildroot.net/results/94f/94fbc1e5afe183e5b071d1e869b2d780025389e2

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iproute2: use @D instead of IPROUTE2_DIR

We more generally use $(@D) instead of $(pkg_DIR) to refer to the
package source directory, so this commit updates iproute2 to also use
$(@D) everywhere.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iproute2: fix no-thread build

iproute2 believes that it needs to link with libpthread for its arpd
binary, because "some db implementations require thread". Therefore, our
iproute2.mk explicitly disables the build of arpd when thread support is
not available.

However, the sed expression it uses no longer works. The Makefile used
to look like:

TARGETS = foo baz baz arpd foobar

so replacing " arpd " with a space was working fine. However, the
Makefile got changed in iproute2 to:

ifeq (... berkeleydb available ...)
     TARGETS += arpd
endif

i.e, with no space at the end of the line. This made our sed expression
ineffective, causing build issues with no-thread configurations since
arpd was no longer disabled.

To address this, instead of sed-ing the Makefile, we overwrite the
berkeleydb detection of iproute2, by writing to the "Config" file, like
we're doing for other aspects of the package.

Fixes:

  http://autobuild.buildroot.net/results/03a37a2372a4c2e438a073e015c49d9e554b86b7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: proper thread default on m68k and Microblaze

Traditionally, Buildroot has a default of enabling thread
support. However, with the current construct of the thread choice in the
uclibc package, the m68k and microblaze architecture end up with no
thread support as the default.

In order to avoid having to explicit a more complicated "default" value
for the choice, we take a simple approach: we order the 3 possible
choices by order of "preference", since Kconfig selects the first
selectable option in a choice by default.

So, NPTL is first and is the default when available. Then comes
linuxthreads which only gets selected as the default when NPTL is
available. None is offered as a last choice (in the current
implementation, it is never the default, since all architectures can
have thread support, either through NPTL or linuxthreads).

[Thomas: reworked according to Yann's comment that we could rely on the
Kconfig behavior that selects the first available choice option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

am33x-cm3: available only for ELF builds

The am33x-cm3 build system does some objcopy based binary file
manipulation that assumes the compiler for the platform generates ELF
file. While it's true for most ARM platforms, and especially the AM335x
based ones, it is no longer always true since we added support for
Cortex-M. Therefore, this package needs to depend on BR2_BINFMT_ELF.

Fixes:

  http://autobuild.buildroot.net/results/05f46ab28cbfc587e2e031bf38fb975447f8bab6/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libunwind: fix architecture dependencies

Due to a misplaced parenthesis, the libunwind dependency were
incorrect. Indeed, they were of the form:

 default y if LIBC_TYPE && (arm dependency) || (list of other architectures)

Which meant that that the LIBC_TYPE dependency was not taken into
account for the "other architectures". This commit changes that to:

 default y if LIBC_TYPE && ((arm dependency) || list of other architectures)

Without this fix, libunwind can be selected for example on
PowerPC/uClibc configurations, while only PowerPC/glibc should be
allowed. This fixes:

  http://autobuild.buildroot.net/results/96c53ff240dcd68fcc9e3d32c4026c9886edcbe7/

Similarly, it also fixes cases where SuperH/uClibc was allowed, while
only SuperH/glibc should be allowed. This fixes:

  http://autobuild.buildroot.net/results/95a6cca21aea9914ba8bb3f571760fc054c53ecd/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcofi: disable for static-only builds

The libcofi package unconditionally builds a shared library, so we need
to make it unavailable on BR2_STATIC_LIBS=y configurations.

Fixes:

  http://autobuild.buildroot.net/results/329c09bf123cd5b6dbcfff6251ba7a2c7cce50b8/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: disable on PowerPC

This package has been failing to build on PowerPC since March 2016, with
nobody taking care of the problem, so let's disable this package on
PowerPC for the time being. PowerPC is the only architecture on which
blktrace fails to build currently.

Fixes:

  http://autobuild.buildroot.net/results/5a673c692aeb957cd8beb2c2c10ce5fd882ba4b5/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: add missing dependency on Config.in comment

The BR2_PACKAGE_BLKTRACE option "depends on
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS", but this architecture dependency was
not replicated in the Config.in comment. This commit fixes this
inconsistency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntp: disable debugging

When running ntp it randomly aborts at ntp-4.2.8p8/libntp/recvbuff.c:326
which seems to be a debugging feature. This patch just disables
debugging, it does not fix the root cause of the problem.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/odroidc2: enable console display

Redirect the console output to the screen and not only to the serial
port.

Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/uclibc: fix build on thumb2-only arm cpus

Add a patch to revert an upstream commit that broke building for armv7
thumb2-only CPUs.

Commit pointed out by Thomas.

Fixes:
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333657
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333658
    ... and all the other atmel_sama5d* defconfigs
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333643
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333644

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

defconfigs/snps_axs_10*: uboot needs dtc

Fixes:
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333758
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333759

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

defconfigs/kb9202: fix headers version

Fixes:
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/150333697

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-savage: disable DRI support when not available

Fixes
http://autobuild.buildroot.net/results/ecd/ecdb6977d282c276cbdf1f3dd0ccfaddff1d1ac5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/hidapi: depends on NPTL threads

hidapi use NPTL threads functions like pthread_barrier_wait() and
pthread_barrier_destroy(). So the dependency on threads support
doesn't come from libusb package but by hidapi itself.

Fixes:
[microblaze]
http://autobuild.buildroot.net/results/f7e/f7e778562aa1a65ba46f3b2f705d13ace8870805
[m68k]
http://autobuild.buildroot.net/results/2ec/2ecd240ccb15de76017942a8960faac6b3f973b4

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openblas: P5600 and I6400 cores only available for Codescape toolchains

These two MIPS cores are built with MSA support (-mmsa) which is
currently in GCC trunk. The only toolchains that support it right now
are Codescape MTI and Codescape IMG from Imagination Technologies.

Fixes:
  http://autobuild.buildroot.net/results/af5/af5e9f10287aaf9b9be6228ad7d12b2d926f8051/
  http://autobuild.buildroot.net/results/b20/b201e4072b0b634d5ac86781aee24c698f88d689/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpjsip: fix m68k uclinux compile

The GCC manual suggest when getting:
relocation truncated to fit: R_68K_GOT16O foobar
to use -mxgot.

Fixes:

  http://autobuild.buildroot.org/results/e8cdfaf8e2da29a855b5bc09774f3aadee087737/

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lttng-libust: fix build with musl

Backport two patches from upstream to fix build with musl.

Fixes:
    http://autobuild.buildroot.org/results/dcb/dcb6c3aadf6f955016cf3c3f9b917cbec6d29342/
    http://autobuild.buildroot.org/results/deb/deb80eea5ceae3e7f8e0549596dce2fb6a1e7596/
    http://autobuild.buildroot.org/results/91e/91e64477864825c39911e3f3d0a2459f2987c209/
    [...and a lot more...]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Philippe Proulx <eeppeliteloop@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/enlightenment: fix build issue without libuuid

Since enlightenment 0.20 uuid.h is always included in e_pixmap.c but
libuuid is checked at configure time only when wayland support is
enabled.

Include uuid.h must guarded by HAVE_WAYLAND.

Fixes:
  CC       src/bin/src_bin_enlightenment-e_pixmap.o
src/bin/e_pixmap.c:16:18: fatal error: uuid.h: No such file or directory

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kmsxx: needs headers >= 3.8

kms++ uses V4L2_MEMORY_DMABUF, which was only introduced in linux-3.8.

Fixes:
    http://autobuild.buildroot.org/results/8dc/8dcc74586d68195c72a58cb4944d05dd9f935fa1/
    http://autobuild.buildroot.org/results/224/22467a530a146302ef74b11f69cb5cdc54240876/
    http://autobuild.buildroot.org/results/0e5/0e576ec01bbbf68a05216f4459a8a0613c39c141/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ncdu: needs MMU

It uses the system() function, which calls fork().

Fixes:
    http://autobuild.buildroot.org/results/642/642f408d384a32033a677d56e6e3cdf572bd798b/
    http://autobuild.buildroot.org/results/026/026657e624928ed6bede5719f96c2eee797076cf/
    http://autobuild.buildroot.org/results/86b/86b66ed92fb714795ba70c228d4d448a1b61cee0/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/inotify-tools: Fix compilation with gcc6

Fixes
http://autobuild.buildroot.net/results/abc/abcaf70523863a4cd096a1b063be2e742355849f/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update for 2016.08-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: fix Blackfin '.rofixup section size mismatch' problems

The bug has already been reported by Stuart Henderson to binutils
upstream: https://sourceware.org/bugzilla/show_bug.cgi?id=13391

Fixes:

  http://autobuild.buildroot.net/results/d5999ae91a1f4dee3d01a0bbc3d8a4c5939ad175/
  http://autobuild.buildroot.net/results/17232204249aeb04150ac43a2424aa26a6b6c807/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

transmission: fix build when using system libminiupnpc with libutp disabled

Fixes:

  http://autobuild.buildroot.net/results/63a3caac7e1e7b5ab268d9be3cd77617df619659/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: fix broken dependency for the hls plugin

HLS plugin can be built with nettle or libgcrypt or openssl
cryptographic backend. But current dependency on gnutls is incorrect.
It has been working so far because gnutls depends on nettle.

gst-plugins-bad's build system for HLS allows user to choose which
cryptographic backend to use. If that is not specified, it internally
checks for nettle or libgcrypt or openssl in order. If none of the
cryptographic backend is available, HLS plugin gets disabled internally.

Select cryptographic backend according to which cryptographic packages
are available. If both libgcrypt or openssl are not available, choose
nettle by default.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libuio: select gettext when BR2_NEEDS_GETTEXT_IF_LOCALE is set

gettext is added to libuio dependency when BR2_NEEDS_GETTEXT_IF_LOCALE
is set without selecting it at Kconfig level.

Fixes:

  http://autobuild.buildroot.net/results/321688e16596086d1dad6f489d35edbb7fe7a955

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xfsprogs: bump version to 4.7.0

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/oprofile: introduce a BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS

operf_utils.h defines rmb() for a limited number of architectures, so
add this list to BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS to disable any new
or unsupported architectures.

Doing so, this disable oprofile for m68k which lack of memory barrier
operations.

Remove nios2 dependency since it's not supported by oprofile even if
binutils could be built for nios2.

Fixes:

 http://autobuild.buildroot.net/results/1cc761d8a5715d0a2c6eaacfde7e44b225da1b36

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: remove BR2_sh64, use BR2_sh instead of BR2_sh4.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kmsxx: fix static install

Currently, we only try to install the shared libraries.

However, when doing a static build, only the static libs are built,
obviously.

Fix this by only installing relevant libraries.

Fixes:
    http://autobuild.buildroot.org/results/82c/82cfb7451f933b222abe30b5d35d23e409a4af79/
    http://autobuild.buildroot.org/results/bb3/bb3840f14382b6ed77d5947eb3ac5c229286681e/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kmsxx: detect failure at install-staging

Currently, the staging-install commands do not detect failures to
install the libs.

That's because we use ';' to separate the commands, so we only get the
result of the last one.

Fix that by using multi-line commands, so they each are called on their
own and make would catch the failures.

Partially fixes (only detects the real failure):
    http://autobuild.buildroot.org/results/82c/82cfb7451f933b222abe30b5d35d23e409a4af79
    and a few others.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsepol: fix static build

Commit a3ebe45dcb3e (libsepol: bump to version 2.5, 2016-06-26) didn't refresh
correctly the patch adding static build support. Do this now.

Fixes:
http://autobuild.buildroot.net/results/14b/14bbb7c9c59e7f68f3ae7ad63e075e27a0da2b1e/
http://autobuild.buildroot.net/results/97f/97f61d5e46a7f479e8de5dd19d49f7a3d84cc86e/
http://autobuild.buildroot.net/results/920/920e1ddac6bf93707a187e64a4ef7d95aff09e6c/

Cc: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: reinstall l/linux terminfo file

This file was installed prior to the refactoring done in commit
33ba5188351ece027455e460f6cba4245af49f3a ("ncurses: factorize terminfo
files installation").

Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: Update upstream patch to support libcurl >= 7.50.1

An updated patch was committed to Kodi after Curl added a fix to address
the original problem:
https://github.com/curl/curl/commit/d6604524ad24daf4581efbe0020da058d2b3af84

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg: disable assembly optimization for coldfire

Fixes:
http://autobuild.buildroot.net/results/d25425cff055a14b9285cefb0775bc138eb2f914/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libgcrypt: disable assembly for coldfire

Fixes:
http://autobuild.buildroot.org/results/374/374158bb0a0e6a16af5d0b909cd05ec52812aaa3/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx6ulpico: linux.fragment: Disable CONFIG_SMP

imx6ul has currently an issue on kernel 4.7 that causes a stall when running
the "reboot" command.

This issue has been reported in the linux-arm-kernel mailing list, but we
don't have a proper fix at the moment.

This problem is not seen when SMP is disabled, so let's disable it for now
until a proper fix becomes available.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sdl_image: remove trailing \ from the last item of {, HOST_}SDL_IMAGE_CONF_OPTS

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libdvdread: needs host-pkgconf

Add host-pkgconf to the dependencies since pkg-config is used to find
libdvdcss.

Fixes:
http://autobuild.buildroot.net/results/e5f/e5fffdd51bdd6962149a836af1e7a6bbc6bae20c

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: fix simulator build failures

Following reports from me of build failures of the GDB simulator for the
Blackfin architecture, Waldemar cooked a
patch (0005-fix-sim-compile.patch) that removes the typedef of SIM_CPU,
because there was a redefinition of this typedef for Blackfin. This was
not causing an issue with recent compilers as redefining the same
typedef is valid with recent compilers, but was causing build failures
with gcc 4.4.x.

However, by removing the common definition of SIM_CPU, this patch broke
the build of the GDB simulator on other architectures, which did not had
an architecture-specific redefinition of SIM_CPU (unlike Blackfin).

The crux of the problem is in a commit from Mike Frysinger, that tries
to refactor the SIM_CPU definition into a common one. Except that it
leaves a redefinition of it for Blackfin. Removing this second
definition however doesn't easily work, due to include ordering
issues. The easiest solution is to simply revert the patch from Mike
Frysinger. This allows to fix the build for all architectures and all
compiler versions.

Fixes:

  http://autobuild.buildroot.net/results/3b82c44ee853fab0e0c63881f0705bb659412917/
  http://autobuild.buildroot.net/results/dafbb93ab38a4285ce42436219d552cceb14828b/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libvpx: bump version to 1.6.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libvpx: Fix compilation when __uClinux__ is defined

<lddk.h> is a platform-specific header, which is not provided by any C
library today.

Fixes:

  http://autobuild.buildroot.net/results/ae7ba1d5979ebe39aace628fa8ff2c8f08a70a98/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdvdnav: fix nios2 cross-compile

The host is misdetected as OS/2.

Fixes:
http://autobuild.buildroot.net/results/d5b30d6b5463928ded1a1c1f1f5345a726f6ffaf/
http://autobuild.buildroot.net/results/917041c7165093f44a5d3b4a5ba56a3d1b59e456/
http://autobuild.buildroot.net/results/dcfc53b6fc25210cf70a1abf0e24b85f0d971101/
http://autobuild.buildroot.net/results/79109d06183efa17f6f68c1ea78cbd9927c5c46e/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eudev: add patch to fix getrandom() system call on ARM64

When the kernel headers in the toolchain don't provide __NR_getrandom,
eudev has a predefined set of values. However, the provided value for
ARM64 is incorrect, and causes a runtime problem on this architecture
when old kernel headers (not providing __NR_getrandom) are used.

This commit adds a patch to eudev to fix this issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>

gcc: bump 4.9 series to 4.9.4

Two patches are removed, as they have been upstreamed:

 - 130-fix_build_with_gcc-6.patch (svn commit 233721, Git commit
   8c3fa311caa86f61b4e28d1563d1110b44340fb2)

 - 920-libgcc-remove-unistd-header.patch (svn commit 226092, Git commit
   e940d7953f06af11d09229a29ecbcc1ba25b378d)

All other patches have simply been refreshed, with no manual edit
needed.

A build+runtime test has been done with an ARM, Cortex-A8, EABIhf, musl
configuration, booted under Qemu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.18.x and 4.1.x series

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

shellinabox: add dependency on !BR2_STATIC_LIBS

shellinabox uses <dlfcn.h>, so a !BR2_STATIC_LIBS dependency is needed.

Fixes:

  http://autobuild.buildroot.net/results/59dd88e31a5f49231c4131b840fbf1bb76e777e7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

shellinabox: fix build on musl

This commit fixes the build of shellinabox with the musl C library,
which requires two changes:

 - A patch to include <sys/ttydefaults.h>, which is needed to get the
   definitions of TTYDEF_*

 - A hack to workaround what seems to be a problem in musl itself (musl
   does #define utmp utmpx, which causes some symbol conflicts down the
   road). Since anyway the utmpx implementation is just a set of stubs
   in musl, we simply make shellinabox believe that <utmpx.h> is not
   available by passing the appropriate variable. The musl issue has
   been reported at http://www.openwall.com/lists/musl/2016/08/04/8.

Fixes:

  http://autobuild.buildroot.net/results/1847cab964957da3c9bf4911a5ad3602b3c82431/

Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

shellinabox: convert patch to a Git formatted one

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncdu: bump version from 1.9 to 1.11

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mono: bump to version 4.4.2.11

This patch bumps mono to version 4.4.2.11

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "dtc: install libfdt library and headers for host variant"

This reverts commit 5ca9b7cf66941a66cff736aadaf8a31afe55f964. Installing
dtc headers in $(HOST_DIR) causes some build failures of
host-uboot-tools due to a conflicting libfdt.h header.

The possible solution to solve this problem, based on -isystem, has been
reverted has it was causing too many issues that we didn't want to solve
so close to cutting 2016.08-rc1.

Since the headers of libfdt for the host are currently not needed for
any package in the Buildroot tree, it is easier and safer to just revert
this patch.

Fixes:

  http://autobuild.buildroot.net/results/9fba77f4080bf6bc26e341f3f383cdba26c0e14f/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imagemagick: bump to version 7.0.2-6

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncurses: use foreach make loops instead of shell for loops

The main benefit of using make foreach loops is that they will abort
if one of the iteration of the loop fails. The current for loops will
continue, and only report a failure if the last iteration was a
failure, but will silently ignore other errors.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncurses: factorize terminfo files installation

This long list of commands to copy the terminfo files from staging to
target is really silly and can be factorized using a
NCURSES_TERMINFO_FILES variable, which is then iterated through.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: nitrogen*: bump kernel and u-boot version for m4 support

Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.

The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.

The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-imx: bump to version 0.12.2

Changelog:
* imxv4l2videosrc:
  * Stricter checks for video device capabilities
  * Add support for more video formats like 8/16-bit grayscale

* pxp: Fix incorrect return code which broke blitter with GStreamer 1.8

* blitter:
  * Improvements in error logging
  * Fixes for RGBx framebuffer format detection
  * Fix for subtle tearing problem by implementing triple buffering

* audio:
  * Replace objdump-based scan during build configuration
    Codec filenames are instead moved to the C code; the libdir
    path of the libfslaudiocodec.pc file is used to know where on
    the target the files are placed
  * Explicitely add the libfslaudiocodec.pc libdir to the MP3 encoder
    Fixes build errors in buildroot
  * Minor logging fixes

* misc:
  * Proper check for region copies in phys_mem_meta
  * Add missing G_END_DECLS lines in headers

Tested with the following commands on i.MX6Q (IPU):
 # gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxipuvideosink
 # gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
   matroskademux ! imxvpudec ! imxeglvivsink

Tested with the following commands on i.MX7 (PXP):
 # gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! imxpxpvideosink

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-parser: add missing configure options

Enable hard float support when the configuration contains:
BR2_ARM_EABIHF=y

See Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/blob/krogoth/recipes-multimedia/imx-parser/imx-parser.inc

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-parser: add install hooks to fix libraries path

By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.

[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-codec: add missing configure options

Enable VPU and hard float support when the configuration contains:
BR2_ARM_EABIHF=y
BR2_PACKAGE_IMX_VPU=y

See Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/blob/krogoth/recipes-multimedia/imx-codec/imx-codec.inc

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imx-codec: add install hooks to fix libraries path

By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.

The hooks are inspired from the mechanism used in the Yocto recipe:
https://github.com/Freescale/meta-fsl-arm/blob/krogoth/recipes-multimedia/imx-codec/imx-codec.inc

Tested with the following commands:
 # gst-launch-0.10 audiotestsrc ! mfw_mp3encoder ! fakesink
 # gst-launch-1.0 audiotestsrc ! imxmp3audioenc ! fakesink

[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system: move locale purging options to the "System configuration" menu

The options to purge locales and to generate locale data are currently
located in the toolchain menu. However, these options are not really
related to the toolchain per-se, they are more system-level
configuration options, much like the timezone selection option we
already have in the "System configuration" menu.

Therefore, it makes more sense to have the locale-related options in
the "System configuration" menu as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: reduce the list of locales to keep by default

Our current list of locales to keep by default is "C en_US de fr". It
doesn't make much sense to keep "de" and "fr" more than any other
language. So let's keep only the "C" and "en_US" locales by default,
and leave it to the user to specify other locales to keep if needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: purge locales by default

Our current default is to keep all locales installed in
/usr/share/locale/. However, in practice, those locales take up a
significant amount of space, and most users do not need
locales. Therefore, it makes more sense to default to purging locales,
in order to keep only a few useful ones rather than keeping them all.

It helps in providing a small filesystem size by default, and still
allows advanced users who really need locales to tune their
configuration.

As an example, a very basic system with just util-linux enabled (not
even Busybox) weights 11 MB, including 6.4 MB of locales. With this new
default, the generated system is only 4.2 MB.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

config: update synopsys defconfigs

With this commit we update ARC defconfigs with the following:

  - "snps_axs101_defconfig" and "snps_axs103_defconfig":
     - bump linux kernel version to 4.7
     - set up host linux headers to 4.7
     - bump u-boot version to 2016.07

  - "snps_hs38_smp_vdk_defconfig":
     - bump linux kernel version to 4.7
     - set up host linux headers to 4.7

Also we delete "snps_hs38_vdk_defconfig" as we doesn't support
uni-processor HS38 configuration for vdk any longer.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: security bump version to 7.50.1

Contains fixes for CVE-2016-5419..5421:
https://curl.haxx.se/docs/vuln-7.50.0.html

[Peter: extend commit message with CVE info]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

alsa-utils: bump version to 1.1.2

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

alsa-lib: bump version to 1.1.2

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: update web page URL

The web page has moved.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

initscripts: show status in S40network

The output of "/etc/init.d/S40network start/stop" was lacking a
newline due to the usage of printf. Fix it by echoing the status, like
we do in other init scripts.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: libatomic is not built on "uclinux" platforms

The cairo package fails to build on some architectures:
BR2_TOOLCHAIN_HAS_LIBATOMIC is enabled, but libatomic is in fact not
available.

This happens because the gcc logic in libatomic/configure.tgt does not
recognize "uclinux" as a valid OS part of the target tuple, and
therefore it does not build libatomic.

The "uclinux" part of the tuple is used by Buildroot when
BR2_BINFMT_FLAT=y, so we make BR2_TOOLCHAIN_HAS_LIBATOMIC enabled only
if !BR2_BINFMT_FLAT.

It is worth mentioning that support for the uclinux tuple could most
likely very easily be added to gcc: it could rely on the generic
"posix" implementation of libatomic, which uses pthread locks,
available on all architectures where thread support is available.

Fixes:

 [arm]  http://autobuild.buildroot.net/results/3d8dc45e41a043d2c2c26bfb26c3617499fbe671
 [m68k] http://autobuild.buildroot.net/results/318e01406e3e92eb589ee5b2231c671a4dbb6da4

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependency after analysis of the gcc code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/boost: context module needs ARM instructions on ARM

The boost-context module contains ARM assembly code, which uses ARM
instructions. Therefore, on Thumb-2 only platforms (such as Cortex-M),
the following build error occurs:

libs/context/src/asm/make_arm_aapcs_elf_gas.S: Assembler messages:
libs/context/src/asm/make_arm_aapcs_elf_gas.S:33: Error: unshifted register required -- `bic a1,a1,#15'
libs/context/src/asm/make_arm_aapcs_elf_gas.S:42: Error: immediate value out of range

To avoid this error, we make the boost-context module depend on
BR2_ARM_CPU_HAS_ARM.

Fixes:

  http://autobuild.buildroot.net/results/8f6770b59a343b9f710e9363b43227ee9f026660

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use BR2_ARM_CPU_HAS_ARM instead of a dependency on
!BR2_ARM_CPU_ARMV7M.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

readline: add project URL

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: install PuTTY terminfo files

Signed-off-by: David Glessner <david.glessner@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lldpd: bump version to 0.9.4

With this new version, the generation of atom-glue fails with the
following error:

    Making all in src/lib
    make[3]: Entering directory '/mnt/data/src/sfl/zodiac/buildroot/output/build/lldpd-0.9.4/src/lib'
      GEN      atom-glue.c
    arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
    compilation terminated.
    arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
    compilation terminated.
    make[3]: *** [Makefile:899: atom-glue.c] Error 1

There is an upstream patch pushed after 0.9.4 which fixes the
corresponding Makefile.am, included in this commit.

Note that since the provided tarball ships the related Makefile.in file,
we need to tell Buildroot to autoreconfigure the package.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: add comment about AUTORECONF=YES in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lldpd: add sysv init script

Add a simple sysv init script to start the lldpd daemon at boot.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: cosmetic improvements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openpowerlink: bump to v2.4.1

Remove upstream patches.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libseccomp: bump version to 2.3.1

Bump libseccomp version to 2.3.1 to enable power architectures.

Signed-off-by: Judd Meinders <judd.meinders@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

i2c-tools: install binaries to /usr/sbin

Upstream i2c-tools executables are installed to /usr/sbin by default.
Make buildroot match this behavior.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

i2c-tools: add busybox to dependencies if enabled

Before changing the install directory of i2c-tools to /usr/sbin/ make
sure busybox is built first (if selected) in order to ensure that the
symlinks to the busybox-provided versions are overwritten by the
i2c-tools' install commands.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcpdump: bump version to 4.8.0

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: use upstream patch to fix uClibc build issue

Upstream has this patch a while and other projects are using
it already. So better switch to this.

Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

i2c-tools: depend on BUSYBOX_SHOW_OTHERS

As of version 1.25.0 busybox by default includes a nearly complete
implementation of i2c-tools. Hide the upstream version unless the
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS option is selected.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

clapack: disable for m68k coldfire

Either a assembler bug or a platform limitation.
Fixes:
http://autobuild.buildroot.net/results/d24a2e9b35c98a10585cd28b3306a09c49163296/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

assimp: fix m68k uclinux compile

The GCC manual suggest when getting:
relocation truncated to fit: R_68K_GOT16O foobar
to use -mxgot.

https://gcc.gnu.org/onlinedocs/gcc/M680x0-Options.html

Fixes:
http://autobuild.buildroot.net/results/63898c00929b4546279bda52148b218f847714ed/
http://autobuild.buildroot.net/results/bb7a107d1ca6e8713e6ccffe6c61c43b777fb962/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>