Matt Weber [Mon, 6 Nov 2017 12:13:27 +0000 (06:13 -0600)]
uboot: use local libfdt.h
Use of libfdt.h by u-boot is currently using
the <system-path>.
Jan submitted the following upstream
https://patchwork.ozlabs.org/patch/833760/
Resolves a failure like this one observed on uboot-tools
http://autobuild.buildroot.net/results/
347cde4b5c0e6ca76d354396385be4ec1294da73
[Peter: only sed if file exists]
CC: Jan Kundrát <jan.kundrat@cesnet.cz>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Matt Weber [Mon, 6 Nov 2017 12:13:28 +0000 (06:13 -0600)]
uboot-tools: use local libfdt.h
The use of libfdt.h by u-boot is using the
<system-path>. The libfdt part of uboot
is expriencing a lot of change and this patch
should be overcome by events post uboot-2017.11
release.
Jan submitted the following upstream
https://patchwork.ozlabs.org/patch/833760/
Resolves:
http://autobuild.buildroot.net/results/
347cde4b5c0e6ca76d354396385be4ec1294da73
http://autobuild.buildroot.net/results/
2b429f82bed1f03d69021e0f959da4e2db2b5a0b
http://autobuild.buildroot.net/results/
b18012963926682ba192b9176bd3e35fb07cdf56
CC: Jan Kundrát <jan.kundrat@cesnet.cz>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 6 Nov 2017 17:44:15 +0000 (18:44 +0100)]
CHANGES: update with recent libssh2 changes
With the revert to the old behavior, mbedtls is no longer the default.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 5 Nov 2017 21:34:02 +0000 (22:34 +0100)]
libssh2: revert to previous crypto defaults
The recent crypto handling change (commit
04a1031d3: package/libssh2: Add
selectable crypto libraries) had the unfortunate side effect that it no
longer automatically selects the most suitable crypto backend (E.G. one
where the dependency is already enabled), so all users not wanting to use
the mbedtls backend need to explicitly configure this.
Fix this by inverting the logic so the crypto backend sub options use
'depends on' their dependencies instead of 'select', so only the available
backends are displayed.
Like before, default to openssl if no crypto backend dependencies are
currently enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gary Bisson [Tue, 15 Aug 2017 16:14:28 +0000 (18:14 +0200)]
qt5base: add qmake.conf fixup for i.MX platforms
As stated in QTBUG-61156 [1], since Qt5.9 all the Qt apps fail to start
on i.MX platforms.
The reason is that the qmake.conf should apparently now specify which
eglfs backend to use.
It can be seen in the qmake.conf example for i.MX [2].
It has also been integrated into the Yocto meta-freescale layer [3].
Although this issue can be worked around by exporting a variable
(QT_QPA_EGLFS_INTEGRATION=eglfs_viv), this patch aims at providing
a more user-friendly approach by modifying qmake.conf when created.
[1]: https://bugreports.qt.io/browse/QTBUG-61156
[2]: https://github.com/qt/qtbase/blob/5.9/mkspecs/devices/linux-imx6-g%2B%2B/qmake.conf#L35
[3]: https://github.com/Freescale/meta-freescale/blob/master/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase/0015-Add-eglfs-to-IMX-GPU.patch
[Peter: simplify conditional, add comment explaining why]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 6 Nov 2017 09:54:21 +0000 (10:54 +0100)]
openssl: disable libressl on uClibc noMMU
uClibc doesn't implement __register_atfork() on noMMU systems, causing
a build failure of libressl. Since openssl is available as an
alternative on such platforms, we just disable libressl on
uClibc/noMMU systems.
Fixes:
/home/thomas/projets/buildroot/output/build/libressl-2.5.5/crypto/.libs/libcrypto.a(arc4random.o): In function `_rs_init.part.1':
arc4random.c:(.text+0x74): undefined reference to `__register_atfork'
collect2: error: ld returned 1 exit status
This build issue is not visible in the autobuilders, because libressl
is only selectable through a choice, which isn't randomized by the
autobuilder logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 6 Nov 2017 08:46:16 +0000 (09:46 +0100)]
lxc: fix legacy PR_{G, S}ET_NO_NEW_PRIVS handling
Fixes:
http://autobuild.buildroot.net/results/841/
841e9601a6afc023d2a303ffb4b7ea63edd816af/
The configure checks for these use AC_CHECK_DECLS, which define the symbol
to 0 if not available - So adjust the code to match. From the autoconf
manual:
https://www.gnu.org/software/autoconf/manual/autoconf-2.65/html_node/Generic-Declarations.html)
For each of the symbols (comma-separated list), define HAVE_DECL_symbol (in
all capitals) to ‘1’ if symbol is declared, otherwise to ‘0’.
Patch submitted upstream: https://github.com/lxc/lxc/pull/1901
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sergey Matyukevich [Mon, 6 Nov 2017 09:26:02 +0000 (12:26 +0300)]
orange-pi-one: bump kernel and uboot versions
Bump kernel to 4.13.11 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Florian Fainelli [Mon, 6 Nov 2017 01:29:06 +0000 (17:29 -0800)]
ethtool: Allow enabling/disabling pretty printing
Ethtool has a configure script option allowing the enabling or disabling of
pretty printing for drivers, SFP modules etc which can save a significant
amount of bytes on the root filesystem. Allow selecting that, and turn it on by
default (like ethtool's configure script).
[Peter: fix Config.in indentation/style]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 5 Nov 2017 22:43:42 +0000 (23:43 +0100)]
CHANGES: update with recent changes
Add new/removed packages, closed bugzilla issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Arnout Vandecappelle (Essensium/Mind) [Sun, 5 Nov 2017 20:31:22 +0000 (21:31 +0100)]
gstreamer: needs dynamic libraries
Fixes:
http://autobuild.buildroot.net/results/49d/
49dcec0bd2f3bb78c18675a9fa5c9c53cc183fd2/
g_cclosure_marshal_VOID__VOID is defined both in libgobject.a and
libgstreamer.a. It is probably possible to fix this, but gstreamer0.10
has been deprecated for a long time now and is anyway unlikely to be
used in static-only situations, so let's just require dynamic linking.
Propagate to the reverse dependencies. opencv3 already did depend on
dynamic libs.
[Peter: add autobuild reference]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 2 Nov 2017 10:45:17 +0000 (11:45 +0100)]
kvm-unit-test: x86-64 variant only available on x86-64 hosts
We use the host compiler for x86-64 builds, so ensure it is only available
on x86-64 hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yann E. MORIN [Fri, 3 Nov 2017 21:22:16 +0000 (22:22 +0100)]
suport/download: force svn to be non-interactive
Fixes:
http://autobuild.buildroot.org/results/2af/
2af7412846c576089f8596857ab8c81ac31c1bed/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: André Hentschel <nerv@dawncrow.de>
Reviewed-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Joseph Kogut [Fri, 3 Nov 2017 21:10:53 +0000 (14:10 -0700)]
docs: update DEVELOPERS modification process
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sergey Matyukevich [Sun, 5 Nov 2017 18:28:52 +0000 (21:28 +0300)]
configs/pcduino: bump kernel and u-boot versions
Update kernel to 4.13 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sat, 4 Nov 2017 08:47:07 +0000 (09:47 +0100)]
usb_modeswitch: explicitly set --host / --build for the embedded jimtcl
Fixes:
http://autobuild.buildroot.net/results/106/
106af20196089e74c35daabdae46f030981600bd/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Passing extra jimtcl configure flags is unfortunately not forseen in the
usb_modeswitch Makefile, so add a small patch making this possible.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 3 Nov 2017 22:28:37 +0000 (23:28 +0100)]
jimtcl: explicitly set --host / --build
Fixes:
http://autobuild.buildroot.net/results/d13/
d137680bf1c0ebfacef635cb2f0fc14524759143/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sun, 5 Nov 2017 14:58:52 +0000 (15:58 +0100)]
package/libplist: security bump to version 2.0.0
Release notes:
https://github.com/libimobiledevice/libplist/blob/master/NEWS
This version bump fixes
* CVE-2017-6440
* CVE-2017-6439
* CVE-2017-6438
* CVE-2017-6437
* CVE-2017-6436
* CVE-2017-6435
* CVE-2017-5836
* CVE-2017-5835
* CVE-2017-5834
* CVE-2017-5545
* CVE-2017-5209
... and several others that didn't receive any CVE (yet).
The dependency to libxml2 was removed.
Autoreconf is not needed anymore, the upstream tarball includes a
configure script.
[Peter: also drop host-pkgconf dependency, only used for cython]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Sun, 5 Nov 2017 18:24:17 +0000 (20:24 +0200)]
dbus: bump to version 1.12.0
Remove --enable-abstract-sockets; dropped upstream. Remove
ac_cv_have_abstract_sockets that is dropped as well.
Remove --disable-selinux; we handle selinux as an optional dependency
below.
Remove --{enable,disable}-dnotify; this options has been removed in
version 1.7.6, broken since 2010.
Remove --with-init-scripts; dropped upstream.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 5 Nov 2017 19:12:28 +0000 (20:12 +0100)]
orange-pi-pc: bump kernel version to 4.13.11
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 5 Nov 2017 19:10:15 +0000 (20:10 +0100)]
orange-pi-zero: bump kernel version to 4.13.11
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sergey Matyukevich [Sat, 4 Nov 2017 19:40:47 +0000 (22:40 +0300)]
orange-pi-zero: bump kernel version
Bump kernel and kernel headers to 4.13.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sergey Matyukevich [Sat, 4 Nov 2017 19:40:48 +0000 (22:40 +0300)]
package/xr819-xradio: update to the latest version
Bump kernel module git revision to make it work with Linux v4.13.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Romain Naour [Sat, 4 Nov 2017 16:01:25 +0000 (17:01 +0100)]
package/mesa3d: remove old patch for uClibc
This patch is no longer necessary since Buildroot is using uClibc-ng
and the patch [1] as been merged upstream.
It's 2017 and uClibc toolchains have been rebuild with uClibc-ng.
Drop upstream patch and rename remaining one.
[1] https://cgit.openadk.org/cgi/cgit/uclibc-ng.git/commit/?id=
6c4538905e65ceb203f59aaa9a61728e81c6bc0a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Andrey Smirnov [Fri, 3 Nov 2017 18:49:53 +0000 (11:49 -0700)]
fs: add missing $$(sep) to pre- and post-command hooks code
When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.
Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:06 +0000 (11:37 +0100)]
package/zlib: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:05 +0000 (11:37 +0100)]
package/util-linux: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:04 +0000 (11:37 +0100)]
package/ussp-push: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:03 +0000 (11:37 +0100)]
package/urg: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:02 +0000 (11:37 +0100)]
package/scrub: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:01 +0000 (11:37 +0100)]
package/python: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:37:00 +0000 (11:37 +0100)]
package/python-numpy: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:59 +0000 (11:36 +0100)]
package/pcre: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:58 +0000 (11:36 +0100)]
package/patchelf: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:57 +0000 (11:36 +0100)]
package/openobex: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:56 +0000 (11:36 +0100)]
package/opencv3: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:55 +0000 (11:36 +0100)]
package/nginx: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:54 +0000 (11:36 +0100)]
package/m4: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:53 +0000 (11:36 +0100)]
package/libxml2: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:52 +0000 (11:36 +0100)]
package/libtool: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:51 +0000 (11:36 +0100)]
package/libglib2: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:50 +0000 (11:36 +0100)]
package/libffi: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:49 +0000 (11:36 +0100)]
package/gettext: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:48 +0000 (11:36 +0100)]
package/flite: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:47 +0000 (11:36 +0100)]
package/flex: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:46 +0000 (11:36 +0100)]
package/fakeroot: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:45 +0000 (11:36 +0100)]
package/cwiid: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:44 +0000 (11:36 +0100)]
package/clapack: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:43 +0000 (11:36 +0100)]
package/check: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:42 +0000 (11:36 +0100)]
package/canfestival: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:41 +0000 (11:36 +0100)]
package/busybox: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:40 +0000 (11:36 +0100)]
package/bluez_utils: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:39 +0000 (11:36 +0100)]
package/bison: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:38 +0000 (11:36 +0100)]
package/automake: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:37 +0000 (11:36 +0100)]
package/armadillo: add license hash
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Samuel Martin [Fri, 3 Nov 2017 10:36:36 +0000 (11:36 +0100)]
pkg-generic: allow legal-info to be verbose
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Thu, 2 Nov 2017 10:45:20 +0000 (11:45 +0100)]
qt5webengine: only available on x86(-64) hosts
The -m32 compiler flag is used for 32bit builds and the host tools have
limited architecture support. It may work in some situations (e.g.
on aarch64 host when building a 64-bit target), but it's equally likely
that it breaks and those situations are not tested. So just limit to
x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: explain that it may work in some situations]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Thu, 2 Nov 2017 10:45:19 +0000 (11:45 +0100)]
luajit: only available on x86(-64) hosts
The -m32 compiler flag is used for 32bit builds and host-luajit has
limited architecture support. Building for a 32-bit target on a 32-bit
host should always work, but we haven't tested that and it's very
unlikely that someone needs it. So just limit to x86(-64) hosts.
Fixes:
http://autobuild.buildroot.net/results/
5f5b5edb058efe976c003678e21bcc28a87cc828/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: clarify that it might work on 32-bit hosts for a 32-bit target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Korsgaard [Thu, 2 Nov 2017 10:45:18 +0000 (11:45 +0100)]
ti-gfx: only available on x86(-64) hosts
ti-gfx is provided as a x86 self extracting executable, so it is only
available on x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Thomas Preston [Mon, 23 Oct 2017 14:26:14 +0000 (15:26 +0100)]
.gitlab-ci.yml: use gitlab 9.0 varaible names
Gitlab 9.0 prefers "job" instead of "build" for CI variables names.
http://docs.gitlab.com/ce/ci/variables/README.html#9-0-renaming
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Peter Seiderer [Mon, 23 Oct 2017 17:44:58 +0000 (19:44 +0200)]
qt5base: add 3rdparty/harfbuzz-ng license file hash
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Alexey Roslyakov [Mon, 23 Oct 2017 16:19:44 +0000 (23:19 +0700)]
python-protobuf: update dependencies
Since version 3.0.0 protobuf is compatible with Python3, remove
Python2-only dependency.
It depends on python-six now, add this missing dependency.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Matt Weber [Wed, 18 Oct 2017 16:55:23 +0000 (11:55 -0500)]
python-config.sh: don't reassign ${prefix}
When prefix is set to a path like /usr during crossbuild
the sed operations end up executing twice, once for the prefix
reassignment and another for includedir if it is set as a string
including the ${prefix} variable. This results in an issue
when the build directory is under /usr.
This patch updates the remaining location which uses the prefix
variable to also sed and update to use the real path.
Upstream bug report:
https://bugs.python.org/issue31713
Buildroot bug:
https://bugs.busybox.net/show_bug.cgi?id=10361
Fixes failures like the following:
dbus-python-1.2.4 | NOK | http://autobuild.buildroot.net/results/
758858efa97b6273c1b470513f5492258a6d8853
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: refer to autobuild failures that still exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Yann E. MORIN [Sun, 5 Nov 2017 09:14:56 +0000 (10:14 +0100)]
core/reproducible: do not override SOURCE_DATE_EPOCH
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Florian Fainelli [Sat, 4 Nov 2017 22:02:04 +0000 (15:02 -0700)]
ethtool: Bump to version 4.13
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Arnout Vandecappelle (Essensium/Mind) [Sat, 4 Nov 2017 21:58:08 +0000 (22:58 +0100)]
CHANGES: update with the explicit choice of backend in libssh2
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sam Voss [Wed, 1 Nov 2017 16:22:56 +0000 (11:22 -0500)]
package/libssh2: Add selectable crypto libraries
Currently, the selection of the backend is based on a priority order,
which is not always desirable: not all features are available for all
backends, as reported upstream:
https://github.com/libssh2/libssh2/issues/213
In that particular case, the problem is that libgcrypt is unable to
read encrypted certificates created with openssl, but it is likely
that other incompatibilities exist as well.
As such, allow a user to select the backend most appropriate to their
use-case.
Note that this changes the defaults: previously, if openssl was already
selected and we additionally select libssh2, openssl would be used as
a backend. Now, mbedtls is the default so if the user doesn't change
it, mbedtls will be used.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: remove now-unneeded comment in .mk file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Joseph Kogut [Fri, 3 Nov 2017 22:25:33 +0000 (15:25 -0700)]
python-websockets: new package
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evgeniy Didin [Wed, 1 Nov 2017 14:04:31 +0000 (17:04 +0300)]
toolchain: Bump ARC tools to arc-2017.09 release
This commit finally bumps ARC tools to the most recent arc-2017.09 release version.
ARC GNU tools of version arc-2017.09 bring some quite significant changes like:
* Binutils v2.29 with additional ARC patches
* GCC 7.1.1 with additional ARC patches
* glibc 2.26 with additional ARC patches
More information on this release could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2017.09-release
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabrice Fontaine [Thu, 2 Nov 2017 22:09:34 +0000 (23:09 +0100)]
lxc: bump to version 2.1.1
Remove 0001-conf-fix-build-without-libcap.patch (already in 2.1.1)
Add 0001-Fix-compilation-on-toolchain-without-prlimit.patch (merged
upstream)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Fri, 3 Nov 2017 06:39:35 +0000 (07:39 +0100)]
python-docutils: bump version to 0.14
Add licence file checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Andrey Smirnov [Fri, 3 Nov 2017 00:47:57 +0000 (17:47 -0700)]
package/python-toml: bump to version 0.9.3
Bump package to version 0.9.3 and change _SETUP_TYPE to
'setuptools', since its setup.py now uses 'setuptools' by default and
switches to 'distutils' only as a fallback[1]
[1] https://github.com/uiri/toml/blob/0.9.3/setup.py#L2
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Fri, 3 Nov 2017 10:30:34 +0000 (11:30 +0100)]
package/ussp-push: add patches fixing the build
Fixes:
http://autobuild.buildroot.net/results/
bdd932424a45399836f27c435d6f1f6fb8b97c29
http://autobuild.buildroot.net/results/
287b7d35d64d72cbc587192cce1271bda9647608
http://autobuild.buildroot.net/results/
82e1484d9a43df7387137a1bd679a4d74d460a79
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Fri, 3 Nov 2017 10:30:33 +0000 (11:30 +0100)]
Revert "libiio: Disable IIOD on Blackfin"
This reverts commit
53996bee433f09a91b12aa53b2be0f7d22c0acbe.
Commit
93a86b4dec9e73fbe0e186cdde8fb04a36a44762 fixes accept4 support
in uclibc on Blackfin, so re-enable iiod on this target.
Cc: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Fri, 3 Nov 2017 14:49:38 +0000 (15:49 +0100)]
python-mistune: bump version to 0.8
Add licence file checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Fri, 3 Nov 2017 14:49:37 +0000 (15:49 +0100)]
python-m2r: bump version to 0.1.12
Add licence file checksum.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Fri, 3 Nov 2017 15:51:40 +0000 (16:51 +0100)]
moarvm: use host-lua instead of host-luajit
host-luajit has limited architecture support, and moarvm does not need
anything luajit specific - So use host-lua instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Fri, 3 Nov 2017 17:15:06 +0000 (18:15 +0100)]
package/libdrm: bump version to 2.4.88
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Fri, 3 Nov 2017 18:33:59 +0000 (19:33 +0100)]
package/libopenssl: security bump to version 1.0.2m
Fixes the following CVEs:
bn_sqrx8x_internal carry bug on x86_64 (CVE-2017-3736)
Malformed X.509 IPAddressFamily could cause OOB read (CVE-2017-3735)
Release notes: https://www.openssl.org/news/secadv/
20171102.txt
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ryan Coe [Fri, 3 Nov 2017 13:30:04 +0000 (06:30 -0700)]
inadyn: bump version to 2.2.1
Also add hash for license file.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ryan Coe [Fri, 3 Nov 2017 13:30:03 +0000 (06:30 -0700)]
libite: bump version to 1.9.2
Also add hashes for license files.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ryan Coe [Fri, 3 Nov 2017 13:30:02 +0000 (06:30 -0700)]
mariadb: bump version to 10.1.28
Release notes: https://mariadb.com/kb/en/mariadb-10128-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10128-changelog/
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Fri, 3 Nov 2017 12:08:11 +0000 (08:08 -0400)]
DEVELOPERS: Add myself to several packages
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Angelo Compagnucci [Fri, 3 Nov 2017 14:43:31 +0000 (15:43 +0100)]
package/mono: bump to version 5.4.0.201
This patch bumps mono to version 5.4.0.201 and monolite
to version
1050400003.
It also removes a patch not needed anymore.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Fri, 3 Nov 2017 13:27:50 +0000 (09:27 -0400)]
boost: fix handling of BR2_PACKAGE_BOOST_FIBER option
Commit
657dbfa00af724c2539a08eaaf0c8044dd4051d7 ("boost: add fiber
module"), introduced:
BOOST_WITHOUT_FLAGS += $(if $(BR2_PACKAGE_BOOST_FILESYSTEM),,fiber)
which obviously is a typo, and should have been:
BOOST_WITHOUT_FLAGS += $(if $(BR2_PACKAGE_BOOST_FIBER),,fiber)
Due to this, the fiber module gets compiled even if
BR2_PACKAGE_BOOST_FIBER is disabled, causing build failures when NPTL
is not available (the fiber library needs NPTL threads).
Fixes:
http://autobuild.buildroot.net/results/
c8b58bf37b565e7a4dd7959e0d9c1cec993758ba/
http://autobuild.buildroot.net/results/
df6f9d51ee766a6f8fca986cdc7476d148dad53e/
http://autobuild.buildroot.net/results/
fecc16df052ac5b14d3b15e174c7026dfcc8fd33/
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam Duskett [Fri, 3 Nov 2017 13:33:06 +0000 (09:33 -0400)]
libsepol: require threads
libsepol 2.7 now uses <pthread.h>
Fixes:
http://autobuild.buildroot.net/results/
5f1c6872a395d8c6d55e2b1722730871b4daf6a3
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Carlos Santos [Sat, 21 Oct 2017 22:30:18 +0000 (20:30 -0200)]
rfkill: remove package
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Thu, 2 Nov 2017 22:11:03 +0000 (23:11 +0100)]
stress-ng: not available on ARC
Now that ARC supports glibc, stress-ng can be built. Unfortunately,
like NIOS2, it doesn't implement FE_INVALID and a bunch of other
<fenv.h> definitions, so let's prevent stress-ng from being built on
ARC.
Fixes:
http://autobuild.buildroot.net/results/
296b14584c200593f88af75cdda65c4ca03cd863/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Markus Mayer [Tue, 31 Oct 2017 22:36:59 +0000 (15:36 -0700)]
dhcpcd: add systemd start-up service
Add systemd start-up configuration for dhcpcd that is executed after
the network has been brought up.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Markus Mayer [Tue, 31 Oct 2017 22:36:58 +0000 (15:36 -0700)]
dhcpcd: add SysV start-up script
Add System V start-up script for dhcpcd that is run after the network
has been brought up.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Thu, 2 Nov 2017 21:57:02 +0000 (22:57 +0100)]
lua-sdl2: fix build without C++ compiler
lua-sdl2 CMakeLists.txt files did not explicitly indicate that it's a
C-only project, and therefore CMake by default tries to find a C++
compiler, causing a build failure when none was available.
This commit fixes that by adding a patch that adjusts the project()
definitions in CMakeLists.txt.
Fixes:
http://autobuild.buildroot.net/results/
45e39562a68c236c582861d410ee1a9924f2bfc5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Thu, 2 Nov 2017 18:14:05 +0000 (19:14 +0100)]
package/gdb: ARC version has stringent dependencies on host gcc
The ARC gdb version requires a gcc >= 4.8 (because C++11).
Since the host variant uses the same sources as the target variant, we
must ensure that we have a host gcc >= 4.8 as well.
Move the architecture dependencies to their own symbol, and also hide
the comment when they are not met.
Fixes:
http://autobuild.buildroot.net/results/
43eae264991aa369490236c7bd59c0b6a67fcf25/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Wed, 1 Nov 2017 18:53:18 +0000 (16:53 -0200)]
uboot-tools: bump to version 2017.09
The 'env' target has been renamed to 'envtools' so change it
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matt Weber [Wed, 1 Nov 2017 17:18:49 +0000 (12:18 -0500)]
uboot-tools: disable pylibfdt
The current U-Boot build system assumes that if swig is installed on
the host system, it should build pylibfdt, without checking if other
dependencies are available. This causes a number of build failures.
This commit fixes that by using concepts from the future upstream fix
(post 2017.11), which sets up a kconfig variable for pylibfdt and
conditionally enables the swig wrapper creation (default=n).
Relevant upstream patches under review:
- https://patchwork.ozlabs.org/patch/826742/
- https://patchwork.ozlabs.org/patch/826752/
This patch only affects uboot-tools, in which we never need
pylibfdt. The logic in the uboot package, with its
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option, remains unchanged.
Fixes (one of many):
http://autobuild.buildroot.net/results/
f9e13caae9b31c9dcde7d24caecc036324f269cc
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Thu, 2 Nov 2017 07:00:47 +0000 (08:00 +0100)]
uclibc: convert accept4 to use cancel.h macros
Fixes:
http://autobuild.buildroot.net/results/
78e033fe9f43845581a5d87b21a8451f67520e44
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Guo Ren [Thu, 2 Nov 2017 12:14:33 +0000 (20:14 +0800)]
package/dtc: qemu system build need libfdt
The "install-bin" target just installs dtc's programs to host/bin
without libfdt, but building qemu system requires libfdt.
see: https://gitlab.com/c-sky/buildroot/-/jobs/
38654503
So we need to install libfdt to satisfy the requirements of qemu.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Thu, 2 Nov 2017 14:18:12 +0000 (12:18 -0200)]
linux-headers: bump 4.{4, 9, 13}.x series
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fabio Estevam [Thu, 2 Nov 2017 14:18:11 +0000 (12:18 -0200)]
linux: bump default to version 4.13.11
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Thu, 2 Nov 2017 13:17:56 +0000 (15:17 +0200)]
azure-iot-sdk-c: use github for homepage
Many Buildroot users can not read Dutch. Although there is an English
version of this page, the github page looks more suitable as a link for
the software package itself, and the readme.md file is pretty
informative.
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Petr Vorel [Thu, 2 Nov 2017 20:15:05 +0000 (21:15 +0100)]
package/network-manager: Bump to version 1.8.4
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log