git.libre-soc.org Git - buildroot.git/log

package/netifrc: add support for BR2_SYSTEM_DHCP

This patch makes openrc-netifrc package aware of BR2_SYSTEM_DHCP
config, and if set, will start dhcp daemon on configured interface.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- simplify condition for BR2_SYSTEM_DHCP
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netifrc: new package

netifrc entirely replaces openrc's basic network management. As such, it
conflicts with the network services installed by openrc, so we remove
them from openrc when netifrc is enabled.

Currently, we only catter tfor the loopback interface, but we prepare
for also handling the DHCP interface, to come in a latter patch.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
  - remove openrc files within the openrc package itself
  - as it's a generic-package, no need to use post-install hooks
  - use description from the homepage in the help text
  - check-package fixes
  - rename package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- pass UDEVDIR to install udev rules at the correct location]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openrc: add support for spawning getty

We install a template getty service, and we 'instantiate' it in the
default runlevel, using the configured tty.

Ideally, packages that provide a getty program would be responsible
for installing the corresponding service file. However, to keep
consistency with the existing init systems (busybox, systemd, and
sysv), so we do provide it from the openrc package itself.

OpenRC only acts on the files in a runlevel sub-directory, but the
documentation [0] actually suggests that the instance symlink be done
in init.d, and then again symlinked into the actual runlevel
sub-directory. So, we abide by the rules.

Also, to be noted, the getty service file is installed without ensuring
that a getty command is available. This again is not unlike other init
systems, sysvinit and busybox, which behave the same.

[0] https://wiki.gentoo.org/wiki/OpenRC

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
  - move getty template to openrc package  (Thomas)
  - fix namespace of the vaiables (Thomas)
  - simplify creation of the defaults file
  - rewrite commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skeleton-init-openrc: add support to remount rootfs as rw

Add a pseudo entry for /dev/root in fstab, to tell openrc to properly
remount or not remount / read-write.

For consistency with systemd (which is the only other init system to
tweak an fstab basd on / being rw or not), we do this change in the
openrc skeleton rather than in the openrc package.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- tweak the sed expressions
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skeleton-init-openrc: add support for starting sysv scripts

Add an OpenRC service that starts and stops sysv-init scripts. We order
that script 'after local' so that it is started after all other native
openrc services.

Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
  - don't propagate the micro optimisation for running .sh scripts
  - use spaces, not TABs
  - stop services in reverse order
  - reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/Config.in: really remove devmem2

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libspatialindex: fix static build

Fixes:
- http://autobuild.buildroot.org/results/3ea3aa8ba6c89139ee69b055fdccfa62b85e8821

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgcrypt: security bump to version 1.8.5

- Drop second and third patches (alredy in version)
- Add mitigation against an ECDSA timing attack. [T4626,CVE-2019-13627]

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sispmctl: bump to version 4.1

- Remove patch (already in version)
- Change license file to COPYING and Add its hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/devmem2: remove package

It was here just for backwards compatibility and is not used by any
package or board after commits

59856480b6 packages/devmem2: remove from all board configurations
2f6e3eae55 package/ti-gfx: do not use devmem2 in script

There are address casting issues with 32bit access on a 64bit bus (like
on the SoC FPGA ARM processors) with this tool. The Busybox version of
devmem is the most up to date and supports quadword access.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=10171
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments: fix br-riscv{32,64} toolchain fragments

Since commit aee39cbf27e833fad9962eb99b5655dbadcfee60 ("arch/riscv:
set the default float ABI based on ISA extensions"), RISC-V 32/64 use
the lp32d/lp64d ABIs by default. But our pre-built external toolchains
were built with the LP32/LP64 ABI.

Building with lp32d/lp64d gcc flags, but a toolchain built with the
LP32/LP64 ABI causes a number of failures such as:

  /home/mark/buildroot-test/instance-1/output/host/riscv64-buildroot-linux-gnu/sysroot/usr/include/gnu/stubs.h:11:11: fatal error: gnu/stubs-lp64d.h: No such file or directory

or:

  /home/mark/buildroot-test/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-gnu/7.4.0/../../../../riscv64-buildroot-linux-gnu/bin/ld: /tmp/cc2BTtFE.o: can't link hard-float modules with soft-float modules
  /home/mark/buildroot-test/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-gnu/7.4.0/../../../../riscv64-buildroot-linux-gnu/bin/ld: failed to merge target specific data of file /tmp/cc2BTtFE.o

So let's fix our config fragments to reflect the ABIs those toolchains
were built with.

Fixes:

  http://autobuild.buildroot.net/results/a3959b0613cf561059483abc580b144be4817d1a/ (libsepol)
  http://autobuild.buildroot.net/results/3db50d8a0a913413b2198d6c301419136d2d22a7/ (attr)
  http://autobuild.buildroot.net/results/7780fada05b8440ae3e97618615624a6a2dac03f/ (libusb)
  and many others

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/f2fs-tools: fix build without blkid

Fixes:
- http://autobuild.buildroot.org/results/c126cb419709367479578b6f118ac9f0d6622689

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gengetopt: disable documentation

Add a patch to disable documentation through a --disable-doc option
which is already passed by autotools infrastructure

Fixes:
- http://autobuild.buildroot.org/results/63554a4168a69a0e68a222bee2269b5aaeee2021

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libsemanage: reformat HOST_LIBSEMANAGE_DEPENDENCIES

Use a more common formatting for HOST_LIBSEMANAGE_DEPENDENCIES.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ustr: remove package

This package was only used by libsemanage, but it is no longer used
since SELinux 2.7, so drop it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libsemanage: drop dependency on ustr

Since SELinux 2.7 (upstream commit
920ee9ee18024c7714f1121e91854f38fa1eef73), ustr is no longer used by
libsemanage.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/policycoreutils: don't pass DESTDIR when building host variant

DESTDIR was needed before upstream commit
6b901a4fb80cc61c46f75144b5bb366b8da38e82 ("policycoreutils: build:
follow standard semantics for DESTDIR and PREFIX"), but now the proper
semantic is used for DESTDIR and PREFIX.

However, in addition to the PREFIX that is already passed, we also
need to pass ETCDIR and SBINDIR, which are not defined in terms of
PREFIX.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/policycoreutils: drop ARCH variable

The ARCH variable is no longer referenced by the policycoreutils build
system since upstream commit 4cc808671a18b5405be5707eefedd78b9c693268
("Move policycoreutils/mcstrans to mcstrans.")

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/policycoreutils: drop host-setools dependency from host-policycoreutils

There is no reason for host-policycoreutils to depend on host-setools,
it builds/works fine without it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/policycoreutils: drop host-python(3) dependency for host-policycoreutils

Since SELinux 2.7, the python tools that used to be in policycoreutils
have been moved into a separate package, called "python" in upstream
SELinux, and "selinux-python" in Buildroot. Therefore, we can drop the
host-python(3) dependency from host-policycoreutils.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/policycoreutils: drop host-dbus-glib dependency from host-policycoreutils

Since SELinux 2.7, restorecond has been moved to a separate package
from policycoreutils. Due to this, host-dbus-glib is no longer needed
to build host-policycoreutils.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

boot/grub2: bump to verson 2.04

- Remove patch (already in version)
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncurses: use COPYING as license file instead of README

The recent versions of ncurses now have the license information in a
separate file called COPYING.

Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-mako: add hash for license file

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pv: bump to version 1.6.6

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/p11-kit: drop unneeded patch

Patch is not needed since version 0.21.2 and
https://github.com/p11-glue/p11-kit/commit/bf8dfa9f33c1aa8d76f8d1ae6cf79afb90497cd4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nvme: bump to version 1.9

Drop patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-screensaver-planestate: remove package

This package is incompatible with Kodi 18.x, configure is broken:

CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.

This package is also not part of the upstream binary repo:
https://github.com/xbmc/repo-binary-addons

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kodi-visualisation-waveforhue: remove package

This package is incompatible with Kodi 18.x, configure is broken:

CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.

For details read PR 2857 of https://github.com/LibreELEC/LibreELEC.tv

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kodi-audiodecoder-opus: remove package

This package is incompatible with Kodi 18.x, configure is broken:

CMake Error at output/host/x86_64-buildroot-linux-uclibc/sysroot/usr/share/kodi/cmake/AddonHelpers.cmake:197 (message):
"@ADDON_DEPENDS@" not found in addon.xml.in.

This package is also not part of the upstream binary repo:
https://github.com/xbmc/repo-binary-addons

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kodi-vfs-sftp: new package

Internal sftp support was removed in Kodi 18.0, see upstream PR 12005.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: add license file hash]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kodi-vfs-rar: new package

Internal rar support in Kodi was moved to this addon with the Kodi
release 18.0-Leia, see upstream PR 11912.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: fix license, add license file hashes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libcec: bump version to 4.0.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fstrcmp: new package

Needed for Kodi >= 18.0
https://github.com/xbmc/xbmc/commit/c79fb23a7d7b8550f236ecbc9d3f0af4e57365e4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libspatialindex: bump to version 1.9.0

- Switch site to github to get latest version
- Switch to cmake to be able to disable tests as they fail to build with
/home/fabrice/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: warning: libspatialindex.so.5, needed by ../../.libs/libspatialindex_c.so, not found (try using -rpath or -rpath-link)
/home/fabrice/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: ../../.libs/libspatialindex_c.so: undefined reference to `Tools::NotSupportedException::NotSupportedException(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >)'
- Add C++11 dependency for shared_ptr
- Drop patch (already in version)
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pulseaudio: enable reproducible builds

Upstream added support to create reproducible builds:
https://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/?id=3d9deb1e5679e15c3277e144a822be9b0a036514

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pulseaudio: bump version to 13.0

Release notes:
https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/13.0/

Support for bluez4 was removed upstream:
https://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/?id=3b1093c0ad882640ef7cf2b88088d77988be7610

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lockfile-progs: bump to version 0.1.18

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: don't switch to https URL]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lldpd: bump to version 1.0.4

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/liburcu: bump to version 0.11.1

- Add hash for license files
- RISC-V is supported since version 0.11.0 and
https://github.com/urcu/userspace-rcu/commit/fdfad81006c2c964781b616f0a75578507be809c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/bird: bump to version 2.0.6

Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/glorytun: bump version to 0.2.0

The hash of the license file has changed due to the name:
-Copyright (c) 2015-2019, angt
+Copyright (c) 2015-2019, Adrien Gallouët <adrien@gallouet.fr>

Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lttng-libust: fix build with glibc 2.30

Fixes:
- http://autobuild.buildroot.org/results/00a69be575224b9fa739acf5a5f8676d171ad992

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/syslog-ng: fix runtime in 32-bit

When this line:
unix-stream ("/dev/log");
is used as source in the .conf file and syslog-ng receives a message
(sent for test purposes using 'logger') the server throws the exception:
ERROR:lib/window-size-counter.c:76:window_size_counter_sub: assertion failed: (old_value >= value)

Even after replacing that config by:
unix-dgram ("/dev/log");
when the server is stopped it throws the same exception.

Add one upstream patch to fix both issues.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/295369456

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add support for gallium freedreno driver

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add support for gallium panfrost driver

For details see https://panfrost.freedesktop.org

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add support for gallium lima driver

More infos can be found here:
https://gitlab.freedesktop.org/lima/web/wikis/home

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/{mesa3d, mesa3d-headers}: bump version to 19.1.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: select kmsro for etnaviv

Quote from mesa3d meson.build:
"kmsro driver requires one or more renderonly drivers
(vc4, etnaviv, freedreno)".

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: switch build system to meson

Update patches for meson:
0002-configure.ac-invert-order-for-wayland-scanner-check.patch
0003-set-LIBCLC_INCLUDEDIR.patch

Disable unused options that are set to "auto" mode.
(valgrind, gallium-omx, power8).

Remove --disable-static option since there is no meson equivalent.
Remove --disable-mangling since it's not yet supported by meson.

Use r100 instead of radeon as DRI name for BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON.

Add a new depedency on host-python3-mako since we can't use
generated headers from the release archive [2].

[1] http://patchwork.ozlabs.org/patch/1084248/
[2] http://lists.busybox.net/pipermail/buildroot/2019-April/249057.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add xvmc option

"XVMC state tracker requires at least one of the following gallium drivers: r600, nouveau."

https://cgit.freedesktop.org/mesa/mesa/commit/?id=22a817af8a89eb3c762fc3e07b443a3ce37d7416

Signed-off-by: Romain Naour <romain.naour@smile.fr>
[moved Config.in option into Gallium block, fixed comment dependency]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python3-mako: new package

host-python3-mako will be used by python 3 only script used in the
build system of mesa3d package.

There is no way to force building host-python-mako for python2 and
python3 [1].

[1] http://patchwork.ozlabs.org/patch/1084248/

Signed-off-by: Romain Naour <romain.naour@smile.fr>
[removed host-python-markupsafe dependency, not needed since v1.0.2]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/liburcu: update supported architectures

- aarch64_be is supported since version 0.10.0 and
  https://github.com/urcu/userspace-rcu/commit/d1c678425415ed986d0101d5d9ab228b160b2fc3
- m68k is supported since version 0.10.0 and
  https://github.com/urcu/userspace-rcu/commit/2748bd6c7b5732f79cea82eba175b91a35d6833f
- mips is supported since version 0.7.4 and
  https://github.com/urcu/userspace-rcu/commit/e1259cb17954e4e03954ba7376d3ed61649116cd
- nios2 is supported since version 0.10.0 and
  https://github.com/urcu/userspace-rcu/commit/859050b3088aa3f0cb59d7f51ce24b9a0f18faa5
- powerpc64 is supported
- sparc64 is supported

Build tested:
                      br-m68k-68040-full [15/44]: OK
                 br-mips32r6-el-hf-glibc [17/44]: OK
                      br-mips64-n64-full [18/44]: OK
                 br-mips64r6-el-hf-glibc [19/44]: OK
                      br-mipsel-o32-full [20/44]: OK
                          br-nios2-glibc [21/44]: OK
             br-powerpc64le-power8-glibc [24/44]: OK
               br-powerpc64-power7-glibc [25/44]: OK
                        br-sparc64-glibc [30/44]: OK
                       linaro-aarch64-be [35/44]: OK

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/f2fs-tools: bump to version 0.12.0

- Remove patch (already in version)
- Drop 'v' prefix from version to match release-monitoring.org
- Download a snapshot tarball instead of using git

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-rpi-ws281x: new package

Userspace Raspberry Pi PWM/PCM/SPI library for SK6812 and WS281X LEDs.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ffmpeg: bump version to 4.2.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gengetopt: bump to version 2.23

- Remove patch (not needed since
https://git.savannah.gnu.org/cgit/gengetopt.git/commit/?id=9769f643d2e21379b8f7a3fd52ef77184fa753f6)
- Enable parallel build (fixed since
https://git.savannah.gnu.org/cgit/gengetopt.git/commit/?id=8e6fa4d9d63c680b84ba872e8e581eb01ae3bc09)
- Add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/solidrun_macchiatobin_mainline: bump versions of BSP components

Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.

Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/solidrun_clearfog_gt_8k: bump versions of BSP components

Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.

Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

boot/mv-ddr-marvell: bump version to armada-18.12

Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

binaries-marvell: bump version and switch to common firmware

Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.

This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.

Legacy handling is not needed, as configs which did have
the option set will continue to work without change.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

DEVELOPERS: add Asaf Kahlon for collectd

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/wpa_supplicant: fix AP mode settings

New wpa_supplicant v2.9 enables by default AP, P2P, WIFI_DISPLAY
features in defconfig. However these features make sense only for
wpa_supplicant drivers supporting AP mode.

That is why, for consistent configuration, these features should
be explicitely disabled in wpa_supplicant .config file unless
they are requested by Config.in options.

Note that at the moment AP support in Buildroot can be enabled
only for NL80211 driver.

Fixes:
http://autobuild.buildroot.net/results/d37672374db935ac29953263ec68a2786ee65cc2/

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/hostapd: add Config.in option for WPA3 support

New hostapd v2.9 supports WPA3 features such as OWE, SAE, DPP.
Those features are disabled by default in defconfig, so no
dependency from openssl is requried unless WPA3 support
is enabled.

This patch adds Config.in option for WPA3 support in hostapd.
When this option is selected, libopenssl is also selected and
WPA3 features including OWE, SAE, DPP are enabled in hostapd
.config file. When this option is deselected, then WPA3
options are disabled.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/wpa_supplicant: add Config.in option for WPA3 support

New wpa_supplicant v2.9 enables by default WPA3 features in defconfig.
Meanwhile building those features requires openssl.

This patch adds Config.in option for WPA3 support in wpa_supplicant.
When this option is selected, libopenssl is also selected and WPA3
features OWE, SAE, DPP are enabled in wpa_supplicant .config file.
When this feature is deselected, then all the above WPA3 options
are disabled.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add a new option to enable GLX support

When switching to meson build system, enabling GLX support
require at least one DRI or Gallium dirver.

So add a dependency on BR2_PACKAGE_MESA3D_DRIVER for
BR2_PACKAGE_MESA3D_OPENGL_GLX option.

quoting the meson build system:
"dri based GLX requires at least one DRI driver." [1]
"Even when building just gallium drivers the user probably wants dri." [2]

[1] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n340
[2] https://cgit.freedesktop.org/mesa/mesa/tree/meson.build?h=19.0#n266

Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Bernd: moved x11 dependencies from glx condition to xorg7 condition to
fix build error with enabled egl without glx
BR2_PACKAGE_HAS_LIBGL needs to depend on BR2_PACKAGE_MESA3D_OPENGL_GLX]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: small changes to Config.in help text and menus]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: Gallium xa state tracker is only available for nouveau and svga Gallium drivers

i915 and freedreno Gallium drivers are not currently supported by mesa3d package.

https://cgit.freedesktop.org/mesa/mesa/commit/?id=0ba909f0f111824223bc38563d1a6bc73e69c2cc

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: Only one swrast provider can be built

https://cgit.freedesktop.org/mesa/mesa/commit/?id=de24d61765011ed4bfc169b8ad8cf67e86b1f3bd

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add OSMesa classic needs dri swrast

The meson build system now check if dri swrast is enabled
when OSMesa classic is enabled.

See:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=cbbd5bb889a2c271a504c379f36a7cb717a85af4

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: rename OSMesa option

This option is renamed in order to match the naming used by the
meson buildsystem.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/connman: fix legacy wpa_supplicant dbus select

Remove '_NEW' from 'select BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW' in
Config.in.

Wpa_supplicant dbus support option has been renamed from
BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW to BR2_PACKAGE_WPA_SUPPLICANT_DBUS
in the bump to v2.9 (f2ffdbee2aca0ca2bde469475c180d60cb934beb).
While connman package, which depends on wpa_supplicant, has not been
updated.

This patch will fix legacy build error.

Signed-off-by: Thuan Ho <sandwichdoge@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/xinetd: add missing hash for COPYRIGHT file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/tinyxml: add missing hash for README file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/rsyslog: add missing hashes for COPYING.* files

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-pyzmq: add missing hashes for COPYING.(BSD|LESSER) files

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-pyasn: add missing hash for LICENSE.txt file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pppd: add missing file hashes

for :
* pppd/tdb.c
* pppd/plugins/pppoatm/COPYING
* pppdump/bsd-comp.c
* pppd/ccp.c
* pppd/plugins/passprompt.c

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/nss-pam-ldapd: add missing hash for COPYING file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/nss-mdns: add missing hash for LICENSE file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kmod: add missing hash for COPYING file

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/joe: license is GPL-2.0+

Joe changed the COPYING file from GPL-1.0 to GPL-2.0 in the development
leading up to 3.8:

https://sourceforge.net/p/joe-editor/mercurial/ci/d731f9b3794bc4c896f2efa1c97ac2c82c3365ac/

So change the license to GPL-2.0+

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kf5: fix _LICENSE_FILE -> _LICENSE_FILES typos

This fixes WARNINGs in make legal-info of the kind:
WARNING: kf5-extra-cmake-modules-5.47.0: cannot save license
(KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES not defined)

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/bwm-ng: license is GPL-2.0+

The source files contain the "(at your option) any later version" text, so
change the licese to GPL-2.0+.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ifplugd: license is GPL-2.0+

The source files contain the "(at your option) any later version" text and
the website states:

License

This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.

http://0pointer.de/lennart/projects/ifplugd/

So change the license to GPL-2.0+

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/docker-proxy: bump version to 55685ba49593

Which is the version used by docker 18.09.9:

https://github.com/docker/engine/commit/0a3767c7e9803f0a595a07b0548e99d60e861062

Also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/docker-cli: bump version to 18.09.9

Includes a number of post-18.09.7 bugfixes and to keep in sync with the
docker-engine version.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/docker-engine: security bump to version 18.09.9

Fixes the following security vulnerability:

CVE-2019-13509: Docker Engine in debug mode may sometimes add secrets to the
debug log. This applies to a scenario where docker stack deploy is run to
redeploy a stack that includes (non external) secrets. It potentially
applies to other API users of the stack API if they resend the secret.

And a number of other non-security issues.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.2.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cups-filters: fix broken symlink in installation

The patch used previously to support versions of ln lacking the '-r'
option generated broken links:

    $ file target/usr/lib/cups/backend/driverless
    target/usr/lib/cups/backend/driverless: broken symbolic link to ../../usr/lib/cups/driver/driverless

Add a squashing of two patches already applied upstream that provide a
better solution:

    https://github.com/OpenPrinting/cups-filters/pull/154
    https://github.com/OpenPrinting/cups-filters/pull/157

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cups-filters: fix build without NLS

texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.

With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/protobuf: work around gcc bug 85180

With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building protobuf with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.

Fixes:
http://autobuild.buildroot.net/results/73dc9610a13d6e14eec58d529617210d93d5dec4/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: fix variable name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-flask-login: add hash for the license file

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fakeroot: remove 1/1 numbering from patch

check-package warns with:
0002-communicate-check-return-status-of-msgrcv.patch
generate your patches with 'git format-patch -N'

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fakeroot: test for SYSV IPC support

fakeroot can be built to either use SYSV IPC or TCP for message passing.

A bug was discovered where Microsoft Windows 10 Services for Linux
doesn't include support for SYSV IPC MsgQ. This patch adds support to
detect this case and automatically build fakeroot to use the TCP
transport instead (It is assumed a TCP transport would definitely have
more overhead then MsgQs so the default wasn't changed to TCP).

Fixes
https://bugs.busybox.net/show_bug.cgi?id=11366

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jean-Francois Doyon <jfdoyon@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: use a post-patch hook and AUTORECONF=YES]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Revert "package/python-sip: bump to version 4.19.13"

This reverts commit 9135ab7a7c76b38b50dadbc381c55e77c86e9e0d. This
version bump causes a major issue: the entire root filesystem of the
build machine is being copied into $(STAGING_DIR)/usr/lib/python2.7/,
causing the build to consume the entire disk space of the machine.

>>> python-sip 4.19.13 Installing to target
[...]
make[2]: Leaving directory `/home/test/buildroot/output/build/python-sip-4.19.13/siplib'
Traceback (most recent call last):
File "/home/test/buildroot/output/build/python-sip-4.19.13/mk_distinfo.py", line 108, in <module>
fn_f = open(fn, 'rb')
FileNotFoundError: [Errno 2] No such file or directory: '/home/test/buildroot/output/target/usr/lib/python3.7/site-packages/sip.pyi'
make[1]: *** [install_distinfo] Error 1
make[1]: *** Waiting for unfinished jobs....
cp: cannot open `/proc/fs/aufs/plink_maint' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_fifos' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_hardlinks' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_regular' for reading: Permission denied
cp: cannot open `/proc/sys/fs/protected_symlinks' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/cad_pid' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/unprivileged_userns_apparmor_policy' for reading: Permission denied
cp: cannot open `/proc/sys/kernel/usermodehelper/bset' for reading: Permission denied
...

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mariadb: bump to version 10.3.18

Release notes:
https://mariadb.com/kb/en/library/mariadb-10318-release-notes/

Changelog:
https://mariadb.com/kb/en/mariadb-10318-changelog/

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: bump to version 10.3.17

Release notes:
https://mariadb.com/kb/en/library/mariadb-10317-release-notes/

Changelog:
https://mariadb.com/kb/en/mariadb-10317-changelog/

Fixes the following security vulnerabilities:
CVE-2019-2805
CVE-2019-2740
CVE-2019-2739
CVE-2019-2737
CVE-2019-2758

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: add bug tracker link to existing patch

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mariadb: fix build error with newer cmake

When using a newer host system cmake to build MariaDB, the following build
error occurs:

    CMake Error at cmake/os/Linux.cmake:29 (STRING):
    STRING sub-command REPLACE requires at least four arguments.
    Call Stack (most recent call first):
    CMakeLists.txt:101 (INCLUDE)

    CMake Error at cmake/os/Linux.cmake:29 (STRING):
    STRING sub-command REPLACE requires at least four arguments.
    Call Stack (most recent call first):
    CMakeLists.txt:101 (INCLUDE)

Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>