2007-04-04  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (do_neon_ext): Enforce immediate range.
(insns): Use I15 for vext.

gas/testsute/
* gas/arm/neon-cov.s: Add new vext test.
* gas/arm/neon-cov.d: Ditto.

2007-04-04  Paul Brook  <paul@codesourcery.com>

ld/
* configure.tgt: Loosen checks for arm uclinux eabi targets.
gas/
* configure.tgt: Loosen checks for arm uclinux eabi targets.

daily update

*** empty log message ***

* dbxread.c (read_ofile_symtab): Move current_objfile
clearing to after end_stabs.

daily update

*** empty log message ***

* config/tc-xtensa.c (xtensa_flush_pending_output): Check
outputting_stabs_line_debug.

* config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
devices.
* doc/c-avr.texi: Document new devices.

* gdb.texinfo: Consistently capitalize all significant words in
node names, chapter titles, section titles, and headings.  Update
cross references to match.
(Starting and Stopping Trace Experiment): Make node name plural.
(Breakpoint related warnings): Hyphenate "Breakpoint-related".

PR binutils/4292
* bfd.c (bfd_fprintf_vma): Do not print addresses of 32-bit
  targets as 64-bit values, even if running on a 64-bit host.
* coffgen.c (coff_print_symbol): Likewise.
* nm.c (value_format): Replace with value_format_32bit and
  value_format_64bit.
  (set_radix): Update setting of value_format.
  (set_print_width): New function.  Compute the address size of a
  given bfd and set the print_width global appropriately.
  (display_archive): Use set_print_width.
  (display_file): Likewise,
  (print_object_filename_sysv): Update use of print_width.
  (print_archive_member_sysv): Likewise.
  (print_symbol_filename_posix): Likewise.
  (print_sumbol_info_bfd, print_symbol_info_sysv): Likewise.

ld/

2007-04-02  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4090
* ldexp.h (node_type): Add lineno.
* ldexp.c: Include "ldlex.h".
(exp_intop): Set the lineno field from lineno.
(exp_bigintop): Likewise.
(exp_relop): Likewise.
(exp_nameop): Likewise.
(exp_binop): Set the lineno field from lineno of lhs.
(exp_trinop): Likewise.
(exp_unop): Set the lineno field from lineno of child.
(exp_assop): Set the lineno field from lineno of src.
(exp_provide): Likewise.
(exp_assert): Set the lineno field from lineno of exp.
(exp_get_abs_int): Set lineno from lineno of nonconstant
expression when report problem.

ld/testsuite/

2007-04-02  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4090
* ld-elf/expr1.d: New file.
* ld-elf/expr1.s: Likewise.
* ld-elf/expr1.t: Likewise.

gas/
* doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
* doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
* config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.

* filename_cmp.c: Include "config.h".

daily update

*** empty log message ***

* rs6000-tdep.c (rs6000_convert_from_func_ptr_addr): Use parameter
gdbarch instead of current_gdbarch.

    * varobj.c (varobj_create): Keep varobj value
        NULL when evaluating the type.

    * gdb.mi/mi-var-child.c
        (do_children_tests): User char[2] instead of
        char so that automatic printing of pointers to char
        don't give unpredicable result.
        * gdb.mi/var-cmd.c (do_locals_test): Initialize
        local variables.
        * gdb.mi/mi-var-child.exp: Step to right line
        of do_children_tests.
        * gdb.mi/mi2-var-child.exp: Likewise.
        * gdb.mi/mi-var-cmd.exp: Step to right line of
        do_locals_tests.
        (do_children_tests): User char[2] instead of
        char so that automatic printing of pointers to char
        don't give unpredicable result.
        * gdb.mi/mi2-var-cmd.exp: Likewise.
        * lib/mi-support.exp (mi_continue_to_line):
        Pass test name to mi_wait_for_stop.

daily update

*** empty log message ***

* gas/z8k/calr.d: Fix for 64bit bfd.
* gas/z8k/djnz.d: Likewise.
* gas/z8k/inout.d: Likewise.
* gas/z8k/jmp-cc.d: Likewise.
* gas/z8k/jr-back.d: Likewise.
* gas/z8k/jr-forw.d: Likewise.
* gas/z8k/reglabel.d: Likewise.
* gas/z8k/ctrl-names.d: Fix name.  Fix for 64bit bfd.
* gas/z8k/ret-cc.d: Likewise.

* NEWS: Mention new Windows CE support.

* gas/i386/nops-3.s: Don't use .align.

* config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
Do not check is_loop_target flag.
(xtensa_frob_label): Adjust calls to xtensa_move_labels.
(xg_assemble_vliw_tokens): Likewise.  Also avoid calling
xtensa_move_labels for alignment of loop opcodes.

*** empty log message ***

daily update

gdb/

* configure.tgt: Move mips*-*-pe and sh*-*-pe to
the obsoletion stanza.
* NEWS: Mention deleted targets.

* config/sh/tm-wince.h: Remove.
* config/sh/wince.mt: Remove.
* config/mips/tm-wince.h: Remove.
* config/mips/wince.mt: Remove.

* wince.c: Remove.
* wince-stub.c: Remove.
* wince-stub.h: Remove.
* Makefile.in (wince.o): Remove rule.
(wince-stub.o): Likewise.

* mips-tdep.c (mips_next_pc): Make static.
* mips-tdep.h (mips_next_pc): Remove declaration.
* arm-tdep.c (arm_pc_is_thumb): Make static.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
* arm-tdep.h (arm_pc_is_thumb_dummy): Remove declaration.
(arm_pc_is_thumb): Likewise.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.

gdb/doc/

* gdb.texinfo (WinCE): Delete obsolete subsection.

* win32-low.c: Commit leftover changes from 2007-03-29.

* MAINTAINERS: Remove d10v entry.
* Makefile.in (SFILES): Remove dwarfread.c.
(COMMON_OBS): Remove dwarfread.o.
(gdb_sim_d10v_h, abug-rom.o, cpu32bug-rom.o, d10v-tdep.o, dwarfread.o)
(remote-est.o, rom68k-rom.o): Delete.
* NEWS: Mention removal of d10v, target abug, target cpu32bug,
target est, target rom68k, and DWARF 1.
* configure.tgt: Mark d10v as removed.
* dwarf2read.c: Doc update.
* elfread.c (struct elfinfo): Remove dboffset, dbsize, lnoffset,
and lnsize.
(elf_locate_sections): Do not set them.
(elf_symfile_read): Do not call dwarf_build_psymtabs.
* symfile.h (dwarf_build_psymtabs): Delete prototype.
* config/m68k/monitor.mt (TDEPFILES): Prune.
* abug-rom.c, cpu32bug-rom.c, d10v-tdep.c, dwarfread.c,
remote-est.c, rom68k-rom.c, config/d10v/d10v.mt: Delete.

* gdb.texinfo (M68K): Remove obsolete ROM monitors.
* gdbint.texinfo (DWARF 1): Delete section and other dwarfread.c
references.

* gdb.asm/asm-source.exp: Remove d10v case.
* lib/gdb.exp (skip_cplus_tests): Likewise.
* gdb.asm/d10v.inc: Deleted.

* i387-fp.c (struct i387_fsave, struct i387_fxsave): Make 16-bit
fields short instead of int.  Add explicit padding.
(i387_cache_to_fsave): Remove unnecessary casts.
(i387_fsave_to_cache): Doc fix.
(i387_cache_to_fxsave): Remove unnecessary casts and masking.

2007-03-30  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (process_suffix): Reindent a bit.

* i387-fp.c (i387_cache_to_fxsave): Reinitialize val2 before use.
(i387_fxsave_to_cache): Check fp->ftag while building ftag value.

2007-03-30  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (encode_thumb2_ldmstm): New function.
(do_t_ldmstm): Generate 16-bit push/pop.  Use encode_thumb2_ldmstm.
(do_t_push_pop):  Use encode_thumb2_ldmstm.

gas/testsuite/
* gas/arm/thumb2_ldmstm.d: New test.
* gas/arm/thumb2_ldmstm.s: New test.

* doublest.c (convert_floatformat_to_doublest): Use
floatformat_classify.
(floatformat_is_nan): Rename to...
(floatformat_classify): ...this.  Return more information.
* doublest.h (enum float_kind): New.
(floatformat_is_nan): Replace prototype...
(floatformat_classify): ...with this one.
* valprint.c (print_floating): Use floatformat_classify.  Handle
infinity.

* gdb.base/infnan.c, gdb.base/infnan.exp: New files.

* README: Mention ISO C library requirement.

* Makefile.in (SFILES): Remove nlmread.c.
(COMMON_OBS): Remove nlmread.o.
(nlmread.o): Delete rule.
* README: Delete reference to remote-st.c.
* acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete.
* defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and
GDB_OSABI_LYNXOS.
* i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete.
(_initialize_i386_tdep): Do not reference them.
* nlmread.c: Delete file.
* osabi.c (gdb_osabi_names): Remove NetWare and LynxOS.
* target.c: Doc update.
* thread.c: Delete commented include.
* config/alpha/tm-alpha.h: Doc update.

* gdb.texinfo (Startup): Delete references to some alternate
names for .gdbinit.
(Thread): Remove LynxOS reference.
(Tandem ST2000): Delete target-specific documentation.
* gdbint.texinfo (Symbol Handling): Remove mention of NLM.
(Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
and GDB_OSABI_LYNXOS.

* config/netware.exp: Delete file.

* utils.c (string_to_core_addr): Comment typo.

* mips-tdep.c: Comment typo.

gdb/ChangeLog:

* config/alpha/nm-osf.h (PTRACE_XFER_TYPE): Remove.
* config/mips/nm-linux.h (PTRACE_ARG3_TYPE, PTRACE_XFER_TYPE): Remove.
* config/sparc/nm-linux.h (PTRACE_ARG3_TYPE, PTRACE_XFER_TYPE): Remove.
* config/powerpc/nm-ppc64-linux.h: Remove file.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Set to nm-linux.h.
* inferior.h (PTRACE_ARG3_TYPE): Do not define.
(call_ptrace): Change type of third argument to PTRACE_TYPE_ARG3.
* infptrace.c (call_ptrace): Likewise.
* m68klinux-nat.c (PTRACE_XFER_TYPE): Do not define.
(fetch_register): Replace PTRACE_ARG3_TYPE by PTRACE_TYPE_ARG3
and PTRACE_XFER_TYPE by PTRACE_TYPE_RET.
(store_register): Likewise.

gdb/doc/ChangeLog:

* gdbint.texi (Native Conditionals): Remove PTRACE_ARG3_TYPE.

    * Makefile.in (varobj.o): Add missing dependency.

Fix the entry date of a couple of entries.

*** empty log message ***

daily update

* m32c.cpu (Imm-8-s4n): Fix print hook.
(Lab-24-8, Lab-32-8, Lab-40-8): Fix.
(arith-jnz-imm4-dst-defn): Make relaxable.
(arith-jnz16-imm4-dst-defn): Fix encodings.

* m32c-desc.c: Regenerate.
* m32c-dis.c: Regenerate.
* m32c-opc.c: Regenerate.

* config/tc-m32c.c (rl_for, relaxable): Protect argument.
(md_relax_table): Add entries for ADJNZ macros.
(M32C_Macros): Add ADJNZ macros.
(subtype_mappings): Add entries for ADJNZ macros.
(insn_to_subtype): Check for adjnz and sbjnz insns.
(md_estimate_size_before_relax): Pass insn to insn_to_subtype.
(md_convert_frag): Convert adjnz and sbjnz.

2007-03-29  Michael Snyder  <msnyder@access-company.com>

* MAINTAINERS: Update my email address.

    Add support for exception handling with multiple versions of
        the Ada runtime:
        * ada-lang.c: Update general comments on how Ada exception catchpoints
        are implemented.
        (raise_sym_name, raise_unhandled_sym_name, raise_assert_sym_name)
        (__gnat_raise_nodefer_with_msg): Delete.
        (ada_unhandled_exception_name_addr_ftype): New type.
        (exception_support_info): New type.
        (ada_unhandled_exception_name_addr): Add forward declaration.
        (ada_unhandled_exception_name_addr_from_raise): Likewise.
        (default_exception_support_info): New constant.
        (exception_support_info_fallback): Likewise.
        (exception_info): New global variable.
        (ada_exception_support_info_sniffer): New function.
        (ada_executable_changed_observer): Likewise.
        (ada_unhandled_exception_name_addr_from_raise): Renamed from
        ada_unhandled_exception_name_addr.
        (ada_unhandled_exception_name_addr): Reimplement to match the
        latest Ada runtime implementation.
        (error_breakpoint_runtime_sym_not_found): Delete.
        (ada_exception_sym_name): Get the exception sym name from
        exception_info rather than hardcoding it.
        (ada_exception_sal): Add call to ada_exception_support_info_sniffer.
        Update error handling.
        * Makefile.in (ada-lang.o): Add dependency on observer.h.

merge from gcc

* Makefile.in (coff_solib_h, coff-solib.o, i386v-nat.o, lynx-nat.o)
(remote-st.o, uw-thread.o): Delete.
(HFILES_NO_SRCDIR, ALLDEPFILES): Update.
* configure.host: Move hppa*-*-hiux*, i[34567]86-ncr-*,
i[34567]86-*-dgux*, i[34567]86-*-lynxos*, i[34567]86-*-sco3.2v5*,
i[34567]86-*-sco3.2v4*, i[34567]86-*-sco*, i[34567]86-*-sysv4.2*,
i[34567]86-*-sysv4*, i[34567]86-*-sysv5*, i[34567]86-*-unixware2*,
i[34567]86-*-unixware*, i[34567]86-*-sysv*, i[34567]86-*-isc*, and
rs6000-*-lynxos* to an obsoletion stanza.
* configure.tgt: Move hppa*-*-hiux*, i[34567]86-ncr-*,
i[34567]86-*-lynxos*, m68*-cisco*-*, m68*-tandem-*, m68*-*-os68k*,
and rs6000-*-lynxos* to an obsoletion stanza.  Do not mention
i[34567]86-*-netware*.
* NEWS: Mention deleted targets.

* coff-solib.c, coff-solib.h, i386v-nat.c, lynx-nat.c, remote-st.c,
uw-thread.c, config/nm-lynx.h, config/i386/i386sco.mh,
config/i386/i386sco4.mh, config/i386/i386sco5.mh, config/i386/i386v.mh,
config/i386/i386v4.mh, config/i386/i386v42mp.mh,
config/i386/ncr3000.mh, config/i386/ncr3000.mt,
config/i386/nm-i386sco.h, config/i386/nm-i386sco4.h,
config/i386/nm-i386sco5.h, config/i386/nm-i386v.h,
config/i386/nm-i386v4.h, config/i386/nm-i386v42mp.h,
config/m68k/cisco.mt, config/m68k/os68k.mt, config/m68k/st2000.mt,
config/m68k/tm-cisco.h, config/m68k/tm-os68k.h,
config/rs6000/rs6000lynx.mh, config/rs6000/rs6000lynx.mt,
config/rs6000/tm-rs6000ly.h: Delete files.

    * gdb.dwarf2/dw2-noloc.S: New file.
        * gdb.dwarf2/dw2-noloc.exp: New file.

* defs.h (deprecated_registers_changed_hook): Delete declaration.
* interps.c (clear_interpreter_hooks): Do not clear
deprecated_registers_changed_hook.
* regcache.c (registers_changed): Do not call it.
* top.c (deprecated_registers_changed_hook): Do not define it.
* mi/mi-interp.c (mi_command_loop): Do not clear it.
* tui/tui-hooks.c (tui_install_hooks): Do not install it.
(tui_remove_hooks): Do not remove it.
(tui_selected_frame_level_changed_hook): Check for negative level.
Use get_selected_frame.
(tui_registers_changed_hook): Deleted.

    * stabsread.c (add_undefined_type): Add extra parameter.
        Now handles nameless types separately.
        (struct nat): New type.
        (noname_undefs, noname_undefs_allocated, noname_undefs_length):
        New static variables.
        (read_type): Update calls to add_undefined_type.
        (add_undefined_type_noname): New function.
        (add_undefined_type_1): Renames from add_undefined_type.
        (cleanup_undefined_types_noname): New function.
        (cleanup_undefined_types_1): Renames cleanup_undefined_types.
        (cleanup_undefined_types): New handles nameless types separately.
        (_initialize_stabsread): Initialize our new static constants.

ld/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Daniel Jacobowitz  <dan@codesourcery.com>

* NEWS: Mention -l:foo.
* ld.texinfo: Document it.
* ldlang.c (new_afile): If a lang_input_file_is_l_enum
entry as a name beginning with a coloh, convert it to a
lang_input_file_is_search_file_enum entry without the colon.

ld/testsuite/
* ld-libs/lib-1.s, ld-libs/lib-2.s, ld-libs/lib-2.d,
* ld-libs/libs.exp: New files.

2007-03-29  Denis Pilat  <denis.pilat@st.com>

* configure.ac: Test for signal.h.
* configure, config.in: Regenerate.

PR binutils/4110
* elf.c (IS_VALID_GROUP_SECTION_HEADER): New macro.
  (setup_group): Use it.  Report corrupt group section headers.
  (bfd_section_from_shdr): Use new macro.  Replace constant 4 with
      GRP_ENTRY_SIZE.  Cope with NULLs in the group section table.
  (elf_fake_section): Replace constant 4 with GRP_ENTRY_SIZE.

* itbl-ops.c (itbl_entry): Remove unnecessary and excessively long initialization.
* itbl-ops.h (enum e_processor): Initialise the e_nprocs field using ITBL_NUMBER_OF_PROCESSORS.
* itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.

2007-03-29  Denis Pilat  <denis.pilat@st.com>

* stack.c (print_stack_frame): Always use LOC_AND_ADDRESS in MI output.
* infrun.c (normal_stop): Remove MI specific frame printing treatment.

gas/

2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (build_modrm_byte): For instructions with 2
register operands, encode destination in i.rm.regmem if its
RegMem bit is set.

opcodes/

2007-03-28  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.c (i386_optab): Change InvMem to RegMem for mov and
movq.  Remove InvMem from sldt, smsw and str.

* i386-opc.h (InvMem): Renamed to ...
(RegMem): Update comments.
(AnyMem): Remove InvMem.

PR ld/4267
* elflink.c (evaluate_complex_relocation_symbols): Use bfd_vma
for rel->r_info values.
(bfd_elf_perform_complex_relocation): Likewise.

* configure.srv (arm*-*-mingw32ce*): Move near the other
arm targets.

PR ld/4267
* elf32-ppc.c (allocate_dynrelocs): Set plt.offset to -1 for
unused entries.  Don't clear plt.plist in loop.

Ooops, fix up ChangeLog.

gdb/

* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.

gdb/gdbserver/

* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes.  Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint.  Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.

daily update

*** empty log message ***

* win32-low.c: Rename typedef thread_info to
win32_thread_info throughout.

* win32-i386-low.c: Rename to ...
* win32-low.c: ... this.
* configure.srv: Replace win32-i386-low.o with win32-low.o.
* Makefile.in: Likewise.

* arch-utils.c (legacy_pc_in_sigtramp): Remove.
* arch-utils.h (legacy_pc_in_sigtramp): Remove.

* config/ia64/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/ia64/tm-linux.h: Remove file.
* ia64-tdep.h (struct gdbarch_tdep): Add pc_in_sigtramp callback.
* ia64-tdep.c (ia64_sigtramp_frame_sniffer): Use it instead of
legacy_pc_in_sigtramp.
(ia64_gdbarch_init): Initialize tdep->pc_in_sigtramp.
* ia64-linux-tdep.c (ia64_linux_pc_in_sigtramp): Make static.
Remove func_name argument.
(ia64_linux_init_abi): Install it as tdep->pc_in_sigtramp.

* infrun.c (HAVE_STEPPABLE_WATCHPOINT): Do not redefine.
* target.c (update_current_target): Add to_have_steppable_watchpoint.
* target.h (struct target_ops):  Add to_have_steppable_watchpoint.
(HAVE_STEPPABLE_WATCHPOINT): Define.

* config/ia64/linux.mh (NATDEPFILES): Remove core-aout.o.
* config/ia64/nm-linux.h (KERNEL_U_ADDR, U_REGS_OFFSET,
CANNOT_FETCH_REGISTER, CANNOT_STORE_REGISTER,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_stopped_data_address,
target_insert_watchpoint, target_remove_watchpoint): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* ia64-linux-nat.c (ia64_register_addr): Make static.
(ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
(ia64_linux_insert_watchpoint): Make static.  Remove ptid_p argument.
(ia64_linux_remove_watchpoint): Likewise.  Add type argument.
(ia64_linux_stopped_data_address): Make static.  Add target_ops.
(ia64_linux_stopped_by_watchpoint): Make static.
(ia64_linux_can_use_hw_breakpoint): New function.
(ia64_linux_fetch_register, ia64_linux_fetch_registers): Likewise.
(ia64_linux_store_register, ia64_linux_store_registers): Likewise.
(_initialize_ia64_linux_nat): Install register and watchpoint ops.

ld/
* ld.h (ld_config_type): Add rpath_separator.
* ldmain.c (main): Initialize it.
* lexsup.c (parse_args): Honor config.rpath_separator.
* emultempl/elf32.em (gld${EMULATION_NAME}_search_needed): Likewise.
(gld${EMULATION_NAME}_add_sysroot): Likewise.
(gld${EMULATION_NAME}_parse_ld_so_conf): Use config.rpath_separator
rather than ':' when building the path.
* emultempl/vxworks.em (vxworks_before_parse): New function.
Override config.rpath_separator.
(LDEMUL_AFTER_OPEN): Do not change if EXTRA_EM_FILE has been
set to gld${EMULATION_NAME}_after_open; #define that identifier
to vxworks_foo instead.
(LDEMUL_BEFORE_PARSE): Override in the same way as LDEMUL_AFTER_OPEN.

ld/testsuite/
* ld-vxworks/rpath-1.s, ld-vxworks/rpath-1.d,
* ld-vxworks/vxworks.exp: New files.

bfd/
* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Remove append_rela.
* elfxx-sparc.c (sparc_elf_append_rela_64, sparc_elf_append_rela_32):
Merge into...
(sparc_elf_append_rela): ...this new function.
(SPARC_ELF_APPEND_RELA): Delete.
(_bfd_sparc_elf_link_hash_table_create): Don't initialize
the deleted append_rela field.
(_bfd_sparc_elf_relocate_section): Use sparc_elf_append_rela
instead of SPARC_ELF_APPEND_RELA.
(_bfd_sparc_elf_finish_dynamic_symbol): Likewise.  Use the
elf_size_info structure to find the size of a RELA entry and
the associated swap-out function.
(sparc64_finish_dyn, sparc64_finish_dyn): Merge into...
(sparc_finish_dyn): ...this new function.
(_bfd_sparc_elf_finish_dynamic_sections): Update calls accordingly.

bfd/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Phil Edwards  <phil@codesourcery.com>

* doc/bfd.texinfo: Put the contents after the title page rather
than at the end of the document.

binutils/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Phil Edwards  <phil@codesourcery.com>

* doc/binutils.texi: Put the contents after the title page rather
than at the end of the document.

gas/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Phil Edwards  <phil@codesourcery.com>

* doc/as.texinfo: Put the contents after the title page rather
than at the end of the document.

gprof/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Phil Edwards  <phil@codesourcery.com>

* gprof.texi: Put the contents after the title page rather
than at the end of the document.

ld/
200x-xx-xx  Richard Sandiford  <richard@codesourcery.com>
    Phil Edwards  <phil@codesourcery.com>

* ld.texinfo: Put the contents after the title page rather
than at the end of the document.

Add ChangeLog entry for delta 1.361->1.362 to readelf.c accidentally checked in with a previous commit.

* MAINTAINERS: Update mailing list addresses.  Add myself
as PPC maintainer.

* gdb.cp/method2.cc: New test.
* gdb.cp/method2.exp: New test.
* gdb.cp/Makefile.in (EXECUTABLES): Add method2.

* linespec.c: Include language.h.
(find_methods): Add language parameter.  Call
lookup_symbol_in_language.  Pass language down.
(add_matching_methods): Likewise.  Call
lookup_symbol_in_language.
(add_constructors): Likewise.
(find_method): Pass sym_class to collect_methods.
(collect_methods): Add sym_class parameter.  Pass language
down.
* symtab.c (lookup_symbol): Rename to ...
(lookup_symbol_in_language): ... this.  Add language
parameter.  Use passed language instead of current_language.
(lookup_symbol): New as wrapper around
lookup_symbol_in_language.
(lookup_symbol_aux): Add language parameter.  Use passed
language instead of current_language.
(search_symbols): Indent.
* symtab.h (enum language): Forward declare.
(lookup_symbol_in_language): Declare.
(lookup_symbol): Update description.
* ada-lang.h (lookup_symbol_in_language): Remove declaration.
* ada-lang.c (restore_language): Remove.
(lookup_symbol_in_language): Remove.

daily update

*** empty log message ***

* breakpoint.c (bpstat_num): Add int *num parameter.
* breakpoint.h (bpstat_num): Likewise.
* infcmd.c (continue_command): Adjust to new bpstat_num
interface.
(program_info): Likewise.

* remote-utils.c (monitor_output): Constify msg parameter.
* server.h (monitor_output): Likewise.
* win32-i386-low.c (handle_output_debug_string): New.
(win32_kill): Handle OUTPUT_DEBUG_STRING_EVENT events using
handle_output_debug_string.
(get_child_debug_event): Likewise.

Fix year.

2006-03-27  Paul Brook  <paul@codesourcery.com>

opcodes/
* arm-dis.c (thumb_opcodes): Add entry for undefined insns (0xbe??).

* config/sh/tm-sh.h: Remove file.
* config/sh/embed.mt (DEPRECATED_TM_FILE): Remove.
* config/sh/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/sh/nbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/sh/tm-wince.h: Do not include "sh/tm-sh.h".

* config/sh/tm-sh.h (DEPRECATED_BIG_REMOTE_BREAKPOINT,
DEPRECATED_LITTLE_REMOTE_BREAKPOINT): Remove.
* remote.c: Remove code under #ifdef DEPRECATED_REMOTE_BREAKPOINT,
DEPRECATED_BIG_REMOTE_BREAKPOINT, DEPRECATED_LITTLE_REMOTE_BREAKPOINT.
* sh-tdep.c (sh_breakpoint_from_pc): Return remote breakpoint
sequence if target_shortname is "remote".

doc/ChangeLog:

* gdbint.texinfo (Target Conditionals): Remove mention of
DEPRECATED_REMOTE_BREAKPOINT, DEPRECATED_BIG_REMOTE_BREAKPOINT,
and DEPRECATED_LITTLE_REMOTE_BREAKPOINT.

2007-03-27  Mat Hostetter  <mat@lcs.mit.edu>

* server.c (main): Correct strtoul check.

2007-03-27  Anton Blanchard  <anton@samba.org>

* rs6000-tdep.c (rs6000_frame_cache): Use tdep->lr_frame_offset
instead of wordsize when looking for the LR in a stack frame.

* dwarf2-frame.c (dwarf2_frame_eh_frame_regnum): Rename to...
(dwarf2_frame_adjust_regnum): ...this.  Make static.  Add eh_frame_p
argument.  Update all callers.
(struct dwarf2_frame_ops): Replace eh_frame_regnum with adjust_regnum.
(dwarf2_frame_set_eh_frame_regnum): Rename to...
(dwarf2_frame_set_adjust_regnum): ...this.  Update argument type.
* dwarf2frame.h (dwarf2_frame_set_eh_frame_regnum): Rename to...
(dwarf2_frame_set_adjust_regnum): ...this.
(dwarf2_frame_eh_frame_regnum): Delete prototype.
* rs6000-tdep.c: Include "dwarf2-frame.h".
(rs6000_adjust_frame_regnum): Define.
(rs6000_gdbarch_init): Enable use of DWARF CFI frame unwinder.
Register rs6000_adjust_frame_regnum.

* Makefile.in (rs6000-tdep.o): Update dependencies.

* gdb.ada/exec_changed.exp: Avoid "set confirm off".

2007-03-27  Jon Ringle  <jon@ringle.org>

* linux-low.c: Check __ARCH_HAS_MMU__ also.

Add "make pdf" and "make install-pdf", from Brooks Moses
<brooks.moses@codesourcery.com>.

* config/gdbserver.exp (gdbserver_gdb_load): Update argument list.
(gdb_load): Delete, replace with...
(gdb_reload): ...this.
* gdb.server/server-run.exp: Use gdb_load and gdbserver_run.
* gdb.server/server-mon.exp: Likewise.
* lib/gdb.exp (gdb_run_cmd): Use gdb_reload.
(gdb_start_cmd): New.
(gdb_file_cmd): Save the last loaded file.
(gdb_reload): New.
(gdb_gnu_strip_debug): Use transform.
* lib/gdbserver-support.exp (gdbserver_spawn): Move file download
support here.  Use new $last_loaded_file.  Check mtime.
(gdb_target_cmd): Handle ObjC failure case.
(infer_host_exec): Delete.
(gdbserver_load): Rename to...
(gdbserver_run): ...this.  Simplify.
* lib/mi-support.exp (mi_gdb_file_cmd): Set last_loaded_file.
(mi_gdb_load): Move most contents to a new function...
(mi_gdb_target_load): ...here.  Simplify call to gdbserver_gdb_load.
(mi_run_cmd): Use mi_gdb_target_load.
* gdb.base/break.exp, gdb.base/ending-run.exp, gdb.base/pending.exp,
gdb.base/sepdebug.exp, gdb.base/unload.exp, gdb.objc/objcdecode.exp:
Use gdb_run_cmd.
* gdb.base/charsign.exp: Remove incorrect comment.
* gdb.base/dbx.exp (gdb_file_cmd): Set last_loaded_file.
* gdb.ada/exec_changed.exp, gdb.ada/null_record.exp, gdb.ada/start.exp,
gdb.base/start.exp: Use gdb_start_cmd.

* amd64-tdep.c (amd64_init_frame_cache): New function.
(amd64_alloc_frame_cache, amd64_skip_prologue): Use it.

* ld-elf/note-1.s: Increase .foo size.

* ld-spu/spu.exp (embed_test): New.
* ld-spu/ear.s: New.
* ld-spu/ear.d: New.
* ld-spu/embed.rd: New.
* ld-spu/ovl2.s: New.
* ld-spu/ovl2.d: New.

New test

* NEWS: Mention ".reloc".

* embedspu.sh: Correct toe_addr quoting.

*** empty log message ***

daily update

* embedspu.sh: Combine "_EAR_" and "_EAR_*" patterns.  Tighten
.toe section and .toe address checks.  Use .reloc for _EAR*
symbols defined in non-BSS sections.  Build table for _SPUEAR_
symbols.

* elfxx-ia64.c (elf_backend_default_execstack): Define to 0.