git.libre-soc.org Git - buildroot.git/log

wpa_supplicant: mesh support needs openssl

When BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING is enabeld,
wpa_supplicant currently fails to build with:

../src/common/sae.o: In function `sae_cn_confirm.isra.2':
sae.c:(.text+0x168): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x198): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ffc':
sae.c:(.text+0x214): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x22c): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ecc':
sae.c:(.text+0x2a4): undefined reference to `crypto_ec_point_to_bin'
sae.c:(.text+0x2c0): undefined reference to `crypto_ec_point_to_bin'

[...]

This is due to the fact that the SAE code, used for the mesh network
support, needs OpenSSL support. Therefore, we ensure that
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING selects OpenSSL. Only
OpenSSL is supported, which is why
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected as well.

No changes to the .mk files are needed, because we were already
handling OpenSSL as an optional dependency.

This problem was not yet caught by the autobuilders.

Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mesa3d: fix build with BR2_SHARED_STATIC_LIBS

mesa3d does not allow to enable both static and shared libraries so if
BR2_SHARED_STATIC_LIBS is set, disable static

Fixes https://bugs.busybox.net/show_bug.cgi?id=10326

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vboot-utils: fix ARCH detection

The package includes some target-specific code that is irrelevant
in a host package but gets built anyway. The target for this code
must be one of the supported ChromeOS targets.

Supplied Makefile apparently relies on the environment to provide
a valid target, with a simple fallback to host arch. This breaks
the build if no value is provided and the host arch is not among
the supported ones.

Should fix
http://autobuild.buildroot.net/results/d118a83b6c4f7f910d0d44c279f36251d7ba29e8/
and similar failures.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/config-fragments/autobuild: update toolchains for 2017.11-rc1

All Buildroot pre-built toolchains have been rebuilt with Buildroot
2017.11-rc1, so that they have the latest version of
glibc/musl/uClibc, and also the latest gcc/binutils updates.

Specifically, this will fix the build failures on Blackfin that were
due to the missing accept4() support:

  http://autobuild.buildroot.net/results/8b5a72dd7cde685f6f68f46aeee8b1b60c96d559/
  (openobex)

  http://autobuild.buildroot.net/results/b19dd9ed29944d7f79c6f824669e3baaa0bb045a/
  (libiio)

In terms of changes to the toolchains:

- AArch64 glibc toolchain changed to use 4.4 kernel headers instead
   of 4.1, in order to increase the variety of kernel header versions
   being tested.

- Most configurations now use 4.13 kernel headers instead of 4.12
   (except the configurations that were explicitly using an older
   kernel headers version)

- The mips64 n64 configuration is changed from using gcc 4.9 to gcc
   5, since another ARM configuration already tests gcc 4.9.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: fix link failures due to name clash

Several packages have a similar md5.c file, and each has a function
named byteReverse(). This generates link errors when building
statically ("multiple definition of `byteReverse'").

Fix by applying a patch from upstream.

Fixes:
http://autobuild.buildroot.net/results/419ab2c0e034cc68991281c51caa8271b0fadbab/

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Adam Duskett <aduskett@gmail.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmp++: security bump to v3.3.10

>From the changelong:
Set the FD_CLOEXEC flag on sockets, so they are not "leaked" to
spawned processes

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/collectd: Specify FP layout based on endianness

Big-endian CPUs store floating point as big endian (at lest majority
of them do), so, in order for 'network' plugin to work correctly (and
potentially any user of htond() in collectd's codebase),
--with-fp-layout=endianflip as opposed to --with-fp-layout=nothing
needs to be specified during configuration phase.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: disable for ARCompact

This package fails when building for ARCompact due to toolchain issue.

Marking this with special comment "#ARC toolchain issues for
ARCompact" as the package is to be enabled as soon as the issue with
the ARC toolchain is resolved.

Fixes:

http://autobuild.buildroot.net/results/4c4eaa90335756448007ae3c5ae3839fb17d4442/

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: reformat BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS

Current BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS variable layout going
to be inconvenient and ugly for adding new architectures or
restricting specific architectures. Lets reformat layout of this
variable.

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openjpeg: fix build with threads disabled

Fixes
http://autobuild.buildroot.net/results/f16/f16a558c30199a92e93a31e0ba391b99a9bd689f/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

postgresql: security bump to version 9.6.6

Fixes the following security issues:

CVE-2017-12172: Start scripts permit database administrator to modify
root-owned files.

CVE-2017-15098: Memory disclosure in JSON functions.

CVE-2017-15099: INSERT ... ON CONFLICT DO UPDATE fails to enforce SELECT
privileges.

See the announcement for more details:
https://www.postgresql.org/about/news/1801/

While we're at it, also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: fix fenv build failure on ARCv2 with glibc

https://git.buildroot.net/buildroot/commit/toolchain?id=0633eb58a2912328508a76f8fe9875a0d113a880
added glibc support for ARCv2 which lacks fenv.h.

Code format was suggested by Arnout:
http://lists.busybox.net/pipermail/buildroot/2017-November/206631.html

Fixes
http://autobuild.buildroot.net/results/aec/aec300d7d4472421398a24202d6871c965bd1be5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: adjust how the Config.in dependency is expressed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: simplify BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS logic

Suggested by Arnout:
http://lists.busybox.net/pipermail/buildroot/2017-November/206631.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add packages to Baruch Siach

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

webkitgtk: security bump to version 2.18.3

This is a maintenance release of the current stable WebKitGTK+ version,
which contains a minor rendering fix, another for the WebDriver
implementation, and security fixes for CVE-2017-13798, CVE-2017-13788,
and CVE-2017-13803.

Release notes:

https://webkitgtk.org/2017/11/10/webkitgtk2.18.3-released.html

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpjsip: security bump to 2.7.1

Also add hash for license file

See release notes for details:
https://trac.pjsip.org/repos/milestone/release-2.7.1

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libuv: bump version to 1.16.0

See https://github.com/libuv/libuv/releases/tag/v1.16.0

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nodejs: bump version to 8.9.1

See https://nodejs.org/en/blog/release/v8.9.1/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

go-bootstrap: add BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS

go-bootstrap is a host package that builds a first stage Go compiler,
later used to build the final Go compiler. However, this first stage
compiler only supports building on x86, x86-64 and arm as host
architectures, so we need to add the relevant architecture
dependencies to avoid having go-bootstrap built on other unsupported
platforms.

We do this by introducing BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS
in a new package/go-bootstrap/Config.in.host file. This option is then
used by BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS to make sure we can't enable
Go packages when the host architecture doesn't allow building the Go
compiler.

Fixes:

http://autobuild.buildroot.net/results/cbd419c6ab6fa8a6d18dc137c91f895867e53b8a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch: update config.guess / config.sub

Fixes:
http://autobuild.buildroot.net/results/fbe/fbe21bd173e6566dd93dddd58d4a848de8a3465e/

The build system of the embedded jimtcl copy doesn't use autotools, but does
use an old version of gnuconfig which doesn't know all the architectures
supported by Buildroot, so update config.guess / config.sub like we do in
pkg-autotools.mk

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jimtcl: update config.guess / config.sub

Fixes:
http://autobuild.buildroot.net/results/284/284876bd649cab26e5ecd696c03c71c077ea7411/

The build system doesn't use autotools, but does use an old version of
gnuconfig which doesn't know all the architectures supported by Buildroot,
so update config.guess / config.sub like we do in pkg-autotools.mk

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntp: no longer require openssl

4.2.8p10 no longer requires openssl to compile.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 13}.x series

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.13.12

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Manual: DEVELOPERS file integrity check

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: fix wireless_tools entry

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add myself to packages

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: bump version to 2.2.10 (security)

Security fixes since 2.2.7:

- wnpa-sec-2017-22
  Bazaar dissector infinite loop (Bug 13599) CVE-2017-9352
- wnpa-sec-2017-23
  DOF dissector read overflow (Bug 13608) CVE-2017-9348
- wnpa-sec-2017-24
  DHCP dissector read overflow (Bug 13609, Bug 13628) CVE-2017-9351
- wnpa-sec-2017-25
  SoulSeek dissector infinite loop (Bug 13631) CVE-2017-9346
- wnpa-sec-2017-26
  DNS dissector infinite loop (Bug 13633) CVE-2017-9345
- wnpa-sec-2017-27
  DICOM dissector infinite loop (Bug 13685) CVE-2017-9349
- wnpa-sec-2017-28
  openSAFETY dissector memory exhaustion (Bug 13649) CVE-2017-9350
- wnpa-sec-2017-29
  BT L2CAP dissector divide by zero (Bug 13701) CVE-2017-9344
- wnpa-sec-2017-30
  MSNIP dissector crash (Bug 13725) CVE-2017-9343
- wnpa-sec-2017-31
  ROS dissector crash (Bug 13637) CVE-2017-9347
- wnpa-sec-2017-32
  RGMP dissector crash (Bug 13646) CVE-2017-9354
- wnpa-sec-2017-33
  IPv6 dissector crash (Bug 13675) CVE-2017-9353
- wnpa-sec-2017-13
  WBMXL dissector infinite loop (Bug 13477, Bug 13796) CVE-2017-7702, CVE-2017-11410
  Note: This is an update for a fix in Wireshark 2.2.6 and 2.0.12.
- wnpa-sec-2017-28
  openSAFETY dissector memory exhaustion (Bug 13649, Bug 13755) CVE-2017-9350, CVE-2017-11411
  Note: This is an update for a fix in Wireshark 2.2.7.
- wnpa-sec-2017-34
  AMQP dissector crash. (Bug 13780) CVE-2017-11408
- wnpa-sec-2017-35
  MQ dissector crash. (Bug 13792) CVE-2017-11407
- wnpa-sec-2017-36
  DOCSIS infinite loop. (Bug 13797) CVE-2017-11406
- wnpa-sec-2017-38
  MSDP dissector infinite loop (Bug 13933)
- wnpa-sec-2017-39
  Profinet I/O buffer overrun (Bug 13847)
- wnpa-sec-2017-41
  IrCOMM dissector buffer overrun (Bug 13929)

Full release notes:

  https://www.wireshark.org/docs/relnotes/wireshark-2.2.10.html

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: add toolchain info missing from 2017.11-rc1

This was missed from the release update.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2017.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Openssl is now a virtual package and new defconfigs.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: #10361 has been resolved

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

prosody: build with -fPIC

The prosody configure script defines CFLAGS as -fPIC -Wall, but
because we pass our own CFLAGS, the -fPIC goes away, causing a build
failure when building shared libraries on x86-64:

/home/test/autobuild/run/instance-0/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-amd-linux-gnu/6.2.0/../../../../x86_64-amd-linux-gnu/bin/ld: encodings.o: relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC

So let's pass this -fPIC flag explicitly in CFLAGS. We don't bother
passing it conditionally !BR2_STATIC_LIBS because other packages (e.g
lua) also pass -fPIC unconditionally.

Fixes:

http://autobuild.buildroot.net/results/7f0eb285b75cdeacb21a1f9a9f64d2f0cbbf1d59/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uboot: use local libfdt.h

Use of libfdt.h by u-boot is currently using
the <system-path>.

Jan submitted the following upstream
https://patchwork.ozlabs.org/patch/833760/

Resolves a failure like this one observed on uboot-tools
http://autobuild.buildroot.net/results/347cde4b5c0e6ca76d354396385be4ec1294da73

[Peter: only sed if file exists]
CC: Jan Kundrát <jan.kundrat@cesnet.cz>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uboot-tools: use local libfdt.h

The use of libfdt.h by u-boot is using the
<system-path>. The libfdt part of uboot
is expriencing a lot of change and this patch
should be overcome by events post uboot-2017.11
release.

Jan submitted the following upstream
https://patchwork.ozlabs.org/patch/833760/

Resolves:
http://autobuild.buildroot.net/results/347cde4b5c0e6ca76d354396385be4ec1294da73
http://autobuild.buildroot.net/results/2b429f82bed1f03d69021e0f959da4e2db2b5a0b
http://autobuild.buildroot.net/results/b18012963926682ba192b9176bd3e35fb07cdf56

CC: Jan Kundrát <jan.kundrat@cesnet.cz>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent libssh2 changes

With the revert to the old behavior, mbedtls is no longer the default.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libssh2: revert to previous crypto defaults

The recent crypto handling change (commit 04a1031d3: package/libssh2: Add
selectable crypto libraries) had the unfortunate side effect that it no
longer automatically selects the most suitable crypto backend (E.G. one
where the dependency is already enabled), so all users not wanting to use
the mbedtls backend need to explicitly configure this.

Fix this by inverting the logic so the crypto backend sub options use
'depends on' their dependencies instead of 'select', so only the available
backends are displayed.

Like before, default to openssl if no crypto backend dependencies are
currently enabled.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: add qmake.conf fixup for i.MX platforms

As stated in QTBUG-61156 [1], since Qt5.9 all the Qt apps fail to start
on i.MX platforms.

The reason is that the qmake.conf should apparently now specify which
eglfs backend to use.

It can be seen in the qmake.conf example for i.MX [2].

It has also been integrated into the Yocto meta-freescale layer [3].

Although this issue can be worked around by exporting a variable
(QT_QPA_EGLFS_INTEGRATION=eglfs_viv), this patch aims at providing
a more user-friendly approach by modifying qmake.conf when created.

[1]: https://bugreports.qt.io/browse/QTBUG-61156
[2]: https://github.com/qt/qtbase/blob/5.9/mkspecs/devices/linux-imx6-g%2B%2B/qmake.conf#L35
[3]: https://github.com/Freescale/meta-freescale/blob/master/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase/0015-Add-eglfs-to-IMX-GPU.patch

[Peter: simplify conditional, add comment explaining why]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssl: disable libressl on uClibc noMMU

uClibc doesn't implement __register_atfork() on noMMU systems, causing
a build failure of libressl. Since openssl is available as an
alternative on such platforms, we just disable libressl on
uClibc/noMMU systems.

Fixes:

/home/thomas/projets/buildroot/output/build/libressl-2.5.5/crypto/.libs/libcrypto.a(arc4random.o): In function `_rs_init.part.1':
arc4random.c:(.text+0x74): undefined reference to `__register_atfork'
collect2: error: ld returned 1 exit status

This build issue is not visible in the autobuilders, because libressl
is only selectable through a choice, which isn't randomized by the
autobuilder logic.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: fix legacy PR_{G, S}ET_NO_NEW_PRIVS handling

Fixes:
http://autobuild.buildroot.net/results/841/841e9601a6afc023d2a303ffb4b7ea63edd816af/

The configure checks for these use AC_CHECK_DECLS, which define the symbol
to 0 if not available - So adjust the code to match. From the autoconf
manual:

https://www.gnu.org/software/autoconf/manual/autoconf-2.65/html_node/Generic-Declarations.html)

For each of the symbols (comma-separated list), define HAVE_DECL_symbol (in
all capitals) to ‘1’ if symbol is declared, otherwise to ‘0’.

Patch submitted upstream: https://github.com/lxc/lxc/pull/1901

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

orange-pi-one: bump kernel and uboot versions

Bump kernel to 4.13.11 and U-Boot to 2017.09.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ethtool: Allow enabling/disabling pretty printing

Ethtool has a configure script option allowing the enabling or disabling of
pretty printing for drivers, SFP modules etc which can save a significant
amount of bytes on the root filesystem. Allow selecting that, and turn it on by
default (like ethtool's configure script).

[Peter: fix Config.in indentation/style]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Add new/removed packages, closed bugzilla issues.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer: needs dynamic libraries

Fixes:
http://autobuild.buildroot.net/results/49d/49dcec0bd2f3bb78c18675a9fa5c9c53cc183fd2/

g_cclosure_marshal_VOID__VOID is defined both in libgobject.a and
libgstreamer.a. It is probably possible to fix this, but gstreamer0.10
has been deprecated for a long time now and is anyway unlikely to be
used in static-only situations, so let's just require dynamic linking.

Propagate to the reverse dependencies. opencv3 already did depend on
dynamic libs.

[Peter: add autobuild reference]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kvm-unit-test: x86-64 variant only available on x86-64 hosts

We use the host compiler for x86-64 builds, so ensure it is only available
on x86-64 hosts.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

suport/download: force svn to be non-interactive

Fixes:
http://autobuild.buildroot.org/results/2af/2af7412846c576089f8596857ab8c81ac31c1bed/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: André Hentschel <nerv@dawncrow.de>
Reviewed-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs: update DEVELOPERS modification process

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/pcduino: bump kernel and u-boot versions

Update kernel to 4.13 and U-Boot to 2017.09.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch: explicitly set --host / --build for the embedded jimtcl

Fixes:
http://autobuild.buildroot.net/results/106/106af20196089e74c35daabdae46f030981600bd/

Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.

The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.

Passing extra jimtcl configure flags is unfortunately not forseen in the
usb_modeswitch Makefile, so add a small patch making this possible.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jimtcl: explicitly set --host / --build

Fixes:
http://autobuild.buildroot.net/results/d13/d137680bf1c0ebfacef635cb2f0fc14524759143/

Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.

The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libplist: security bump to version 2.0.0

Release notes:
https://github.com/libimobiledevice/libplist/blob/master/NEWS

This version bump fixes
  * CVE-2017-6440
  * CVE-2017-6439
  * CVE-2017-6438
  * CVE-2017-6437
  * CVE-2017-6436
  * CVE-2017-6435
  * CVE-2017-5836
  * CVE-2017-5835
  * CVE-2017-5834
  * CVE-2017-5545
  * CVE-2017-5209
... and several others that didn't receive any CVE (yet).

The dependency to libxml2 was removed.
Autoreconf is not needed anymore, the upstream tarball includes a
configure script.

[Peter: also drop host-pkgconf dependency, only used for cython]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: bump to version 1.12.0

Remove --enable-abstract-sockets; dropped upstream. Remove
ac_cv_have_abstract_sockets that is dropped as well.

Remove --disable-selinux; we handle selinux as an optional dependency
below.

Remove --{enable,disable}-dnotify; this options has been removed in
version 1.7.6, broken since 2010.

Remove --with-init-scripts; dropped upstream.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

orange-pi-pc: bump kernel version to 4.13.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

orange-pi-zero: bump kernel version to 4.13.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

orange-pi-zero: bump kernel version

Bump kernel and kernel headers to 4.13.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xr819-xradio: update to the latest version

Bump kernel module git revision to make it work with Linux v4.13.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mesa3d: remove old patch for uClibc

This patch is no longer necessary since Buildroot is using uClibc-ng
and the patch [1] as been merged upstream.
It's 2017 and uClibc toolchains have been rebuild with uClibc-ng.

Drop upstream patch and rename remaining one.

[1] https://cgit.openadk.org/cgi/cgit/uclibc-ng.git/commit/?id=6c4538905e65ceb203f59aaa9a61728e81c6bc0a

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

fs: add missing $$(sep) to pre- and post-command hooks code

When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.

Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/zlib: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/util-linux: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ussp-push: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/urg: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/scrub: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-numpy: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pcre: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/patchelf: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/openobex: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/opencv3: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/nginx: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/m4: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libxml2: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libtool: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libglib2: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libffi: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gettext: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/flite: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/flex: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/fakeroot: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cwiid: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/clapack: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/check: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/canfestival: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/busybox: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/bluez_utils: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/bison: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/automake: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/armadillo: add license hash

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

pkg-generic: allow legal-info to be verbose

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qt5webengine: only available on x86(-64) hosts

The -m32 compiler flag is used for 32bit builds and the host tools have
limited architecture support. It may work in some situations (e.g.
on aarch64 host when building a 64-bit target), but it's equally likely
that it breaks and those situations are not tested. So just limit to
x86(-64) hosts.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: explain that it may work in some situations]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

luajit: only available on x86(-64) hosts

The -m32 compiler flag is used for 32bit builds and host-luajit has
limited architecture support. Building for a 32-bit target on a 32-bit
host should always work, but we haven't tested that and it's very
unlikely that someone needs it. So just limit to x86(-64) hosts.

Fixes:
http://autobuild.buildroot.net/results/5f5b5edb058efe976c003678e21bcc28a87cc828/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: clarify that it might work on 32-bit hosts for a 32-bit target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

ti-gfx: only available on x86(-64) hosts

ti-gfx is provided as a x86 self extracting executable, so it is only
available on x86(-64) hosts.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: use gitlab 9.0 varaible names

Gitlab 9.0 prefers "job" instead of "build" for CI variables names.
http://docs.gitlab.com/ce/ci/variables/README.html#9-0-renaming

Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qt5base: add 3rdparty/harfbuzz-ng license file hash

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-protobuf: update dependencies

Since version 3.0.0 protobuf is compatible with Python3, remove
Python2-only dependency.

It depends on python-six now, add this missing dependency.

Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-config.sh: don't reassign ${prefix}

When prefix is set to a path like /usr during crossbuild
the sed operations end up executing twice, once for the prefix
reassignment and another for includedir if it is set as a string
including the ${prefix} variable. This results in an issue
when the build directory is under /usr.

This patch updates the remaining location which uses the prefix
variable to also sed and update to use the real path.

Upstream bug report:
https://bugs.python.org/issue31713

Buildroot bug:
https://bugs.busybox.net/show_bug.cgi?id=10361

Fixes failures like the following:
dbus-python-1.2.4 | NOK | http://autobuild.buildroot.net/results/758858efa97b6273c1b470513f5492258a6d8853

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: refer to autobuild failures that still exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

core/reproducible: do not override SOURCE_DATE_EPOCH

SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).

However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/

Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.

Abide by the rule, and only set it if not already set.

This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.

Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>