package/bcm2835: bump version to 1.62

Changelog (since 1.60):
  - 1.61 2020-01-11 Fixed errors in the documentation for bcm2835_spi_write.
    Fixes issue seen on Raspberry Pi 4 boards where 64-bit off_t is used by
    default via -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64. The offset was
    being incorrectly converted, this way is clearer and fixes the problem.
    Contributed by Jonathan Perkin.
  - 1.62 2020-01-12 Fixed a problem that could cause compile failures with
    size_t and off_t

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1/gstreamer1: update tools comment

The tools option installs more than gst-launch and gst-inspect, so
simplify its prompt to just "install tools", and update the Config.in
help text. While at it, we list them alphabetically.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libevdev: add host-python dependency

Fixes:

  checking for a Python interpreter with version >= 2.6... none
  configure: error: no suitable Python interpreter found

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: fix nouveau std::isinf related compile failure

Activate already existing mesa3d solution for the isinf compile
failure for uclibc based toolchains instead of using a custom
workaround.

- remove 0005-src-gallium-drivers-nouveau-codegen-nv50_ir_ra.cpp-p.patch
- add 0004-c99_math-import-isinf-for-uclibc-based-toolchains.patch

Fixes:
  http://autobuild.buildroot.net/results/cbefc5d4a4fefb674e596400fa1d2698cd89c5b3/
  http://autobuild.buildroot.net/results/dc974da012f53fa4ed3be616f937b0afae423d66/

  ../src/gallium/drivers/nouveau/codegen/nv50_ir_ra.cpp: In member function 'bool nv50_ir::GCRA::simplify()':
  ../src/gallium/drivers/nouveau/codegen/nv50_ir_ra.cpp:1348:19: error: expected unqualified-id before '(' token
            if (std::isinf(bestScore)) {
                     ^

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/nodejs: bump version to v12.16.1

Fixes a number of regressions introduced in v12.16.0:
https://github.com/nodejs/node/blob/master/doc/changelogs/CHANGELOG_V12.md#12.16.1

Tested on Debian 9 and Ubuntu 18.04

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libsndfile: fix CVE-2019-3832

It was discovered the fix for CVE-2018-19758 (libsndfile) was not
complete and still allows a read beyond the limits of a buffer in
wav_write_header() function in wav.c. A local attacker may use this flaw
to make the application crash.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libsndfile: fix CVE-2018-19758

There is a heap-based buffer over-read at wav.c in wav_write_header in
libsndfile 1.0.28 that will cause a denial of service.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: work around a bug in newly released make 4.3

Several users of rolling-release distributions have been reporting on
IRC that Buildroot is broken now that they have switched to the newly
released make 4.3.

It turns out that the constructs we use to generated and include the
internal br2-external related fragments is no longer working with
make-4.3.

Indeed, an upstream bug report [0] seems to imply that it so far was
working by chance. There has been no further feedback, whether this is
really considered a fix for a previous ill-defined behaviour, or an
actual regression...

In the meantime, we add a workaround, suggested in that same bug report,
that fixes the issue for make 4.3, and that should not break on older
make versions either (verified on all relevant versions: from 3.81,
3.82, 4.0, 4.1, and 4.2).

[0] https://savannah.gnu.org/bugs/?57676

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Mircea Gliga <mgliga@bitdefender.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jhead: security bump to version 3.04

- Fix CVE-2019-1010301: jhead 3.03 is affected by: Buffer Overflow. The
  impact is: Denial of service. The component is: gpsinfo.c Line 151
  ProcessGpsInfo(). The attack vector is: Open a specially crafted JPEG
  file.
- Fix CVE-2019-1010302: jhead 3.03 is affected by: Incorrect Access
  Control. The impact is: Denial of service. The component is: iptc.c
  Line 122 show_IPTC(). The attack vector is: the victim must open a
  specially crafted JPEG file.
- Fix CVE-2019-19035: jhead 3.03 is affected by: heap-based buffer
  over-read. The impact is: Denial of service. The component is:
  ReadJpegSections and process_SOFn in jpgfile.c. The attack vector is:
  Open a specially crafted JPEG file.
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-django: security bump to version 3.0.4

Fixes the following security vulnerabilities:

- CVE-2020-9402: Potential SQL injection via tolerance parameter in GIS
  functions and aggregates on Oracle.
  GIS functions and aggregates on Oracle were subject to SQL injection,
  using a suitably crafted tolerance.

For more details, see the advisory:
https://www.djangoproject.com/weblog/2020/mar/04/security-releases/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mesa3d: fix linux/kcmp.h related compile failure

Add upstream patch [1].

Fixes:

  http://autobuild.buildroot.net/results/df5bcb8e4f6e98c4de347abbbe91e10a98047422

  ../src/util/os_file.c:37:24: fatal error: linux/kcmp.h: No such file or directory

[1] https://cgit.freedesktop.org/mesa/mesa/commit/?id=f7bfb10c69dfe48a91e35523cb5ee641bdbf6988

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

utils/genrandconfig: drop outdated python-nfc check

Commit 9ea528f84ba (package/python-nfc: bump to version 0.13.5) changed the
python-nfc package to download from github, so the package no longer needs
bzr on the host.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/fbgrab: bump version to 1.3.1 and update projct URL

- bump version to 1.3.1
  Changelog:
  * Incorrect alpha value when converting 32-bit framebuffers.
  * Documentation for github instead of own homepage.

- update project URL

Fixes bug 12606 ([1]).

[1] https://bugs.busybox.net/show_bug.cgi?id=12606

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Timo Ketola <timo.ketola@exertus.fi>
Acked-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gst1-plugins-base: fix static linking

Add patch to fix static linking of tools.

Fixes:

  http://autobuild.buildroot.net/results/b33019b3c9ad856aced34215c69bb292b536e25e

  .../bin/ld: .../usr/lib/libgstreamer-1.0.a(gstplugin.c.o): in function `gst_plugin_register_func':
  gstplugin.c:(.text+0x3bc): undefined reference to `g_module_make_resident'
  .../bin/ld: .../usr/lib/libgstreamer-1.0.a(gstplugin.c.o): in function `_priv_gst_plugin_load_file_for_registry':
  gstplugin.c:(.text+0x1228): undefined reference to `g_module_supported'
  .../bin/ld: gstplugin.c:(.text+0x126c): undefined reference to `g_module_open'
  .../bin/ld: gstplugin.c:(.text+0x1368): undefined reference to `g_module_symbol'
  .../bin/ld: gstplugin.c:(.text+0x1494): undefined reference to `g_module_supported'
  .../bin/ld: gstplugin.c:(.text+0x17f4): undefined reference to `g_module_close'
  .../bin/ld: gstplugin.c:(.text+0x1a2c): undefined reference to `g_module_error'

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in: drop BR2_NEEDS_HOST_{JAVAC,JAR}

With classpath removed, no packages select these symbols any more - So drop
them and their corresponding logic in dependencies.sh / genrandconfig.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/classpath: drop package

This package has been abandoned by upstream since 2016 and has not
had a release since 2012. In addition the GNU Compiler for Java
that classpath was written to be used with has been removed as of
GCC 7.

It is no longer feasible to support classpath as it requires a java
compiler capable of producing java 1.5 compatible bytecode which is
not possible on hosts with a recent java compiler.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jamvm: drop package

JamVM has not had a release since 2014 and is unmaintained.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zziplib: fix CVE-2018-17828

Directory traversal vulnerability in ZZIPlib 0.13.69 allows attackers to
overwrite arbitrary files via a .. (dot dot) in a zip file, because of
the function unzzip_cat in the bins/unzzipcat-mem.c file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zziplib: fix CVE-2018-16548

An issue was discovered in ZZIPlib through 0.13.69. There is a memory
leak triggered in the function __zzip_parse_root_directory in zip.c,
which will lead to a denial of service attack.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patch: annotate CVE-2019-13638

GNU patch through 2.7.6 is vulnerable to OS shell command injection that
can be exploited by opening a crafted patch file that contains an ed
style diff payload with shell metacharacters. The ed editor does not
need to be present on the vulnerable system. This is different from
CVE-2018-1000156.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patch: fix CVE-2019-13636

In GNU patch through 2.7.6, the following of symlinks is mishandled in
certain cases other than input files. This affects inp.c and util.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patch: fix CVE-2018-20969

do_ed_script in pch.c in GNU patch through 2.7.6 does not block strings
beginning with a ! character. NOTE: this is the same commit as for
CVE-2019-13638, but the ! syntax is specific to ed, and is unrelated to
a shell metacharacter.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patch: annotate CVE-2018-1000156

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/patch: annote CVE-2018-6951

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Makefile: remove bogus comment

The comment "Check files that are touched by more than one package"
was previously located right before the calls to the check-uniq-files
script. However, this script and the logic calling it have been
removed in commit 2496189a4207173e4cd5bbab90256f911175ee57 ("core:
drop check-uniq-files"), so the comment no longer makes any sense:
let's drop it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvncserver: fix CVE-2019-15681

LibVNC commit before d01e1bb4246323ba6fcee3b82ef1faa9b1dac82a contains a
memory leak (CWE-655) in VNC server code, which allow an attacker to
read stack memory and can be abused for information disclosure. Combined
with another vulnerability, it can be used to leak stack memory and
bypass ASLR. This attack appear to be exploitable via network
connectivity. These vulnerabilities have been fixed in commit
d01e1bb4246323ba6fcee3b82ef1faa9b1dac82a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libvncserver: fix CVE-2018-20750

LibVNC through 0.9.12 contains a heap out-of-bounds write vulnerability
in libvncserver/rfbserver.c. The fix for CVE-2018-15127 was incomplete.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/linux-firmware: add missing symlinks"

This reverts commit 23d12793d54480617f4dd104bc70c53e80582fdb, which was
intended for the next branch, not master.

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Baruch Siach <baruch@tkos.co.il>

Update for 2020.02-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rocksdb: fix C++ tests

This will fix a build failure on xtensa and nios2 that missed
-faligned-new

Fixes:
 - http://autobuild.buildroot.org/results/58bf25a16984c4d5f3ce0e26a56712410b67c53a
 - http://autobuild.buildroot.org/results/718fee3d20ef00ffa5c3e617a036cf2b82c97411

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libvncserver: fix pkg-config file

This will fix a build failure with vlc and without zlib

Fixes:
 - http://autobuild.buildroot.org/results/7d5f5980f1ba248a1d95b380d422eaeeaca265f8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/pkg-stats: clear multiprocessing pools after use

During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.

These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172

The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.

Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/pkg-stats: decode subprocess output for python3

In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.

Now, pkg-stats can be run in Python 3.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/taglib: fix CVE-2018-11439

The TagLib::Ogg::FLAC::File::scan function in oggflacfile.cpp in TagLib
1.11.1 allows remote attackers to cause information disclosure
(heap-based buffer over-read) via a crafted audio file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/taglib: fix CVE-2017-12678

In TagLib 1.11.1, the rebuildAggregateFrames function in
id3v2framefactory.cpp has a pointer to cast vulnerability, which allows
remote attackers to cause a denial of service or possibly have
unspecified other impact via a crafted audio file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-multidict: bump to version 4.7.5

Bugfix release, fixing a number of issues. From the CHANGES file:

- Fixed creating and updating of MultiDict from a sequence of pairs and
  keyword arguments.  Previously passing a list argument modified it
  inplace, and other sequences caused an error.
  https://github.com/aio-libs/multidict/issues/457

- Fixed comparing with mapping: an exception raised in the __len__ method caused raising a SyntaxError.
  https://github.com/aio-libs/multidict/issues/459

- Fixed comparing with mapping: all exceptions raised in the __getitem__
  method were silenced.
  https://github.com/aio-libs/multidict/issues/460>

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.4.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5tools: hide qdoc with llvm dependencies

Building qdoc requires a llvm and clang for the host.

However, there is a limitation in the llvm and clang packages in
Buildroot, which makes it impossible to have a host variant without
a target variant.

So, propagate the dependencies of the target llvm and clang, to ensure
we can only have a host-llvm and -clang packages that are correctly
built.

Note that we do propagate all of the dependencies (instead of just the
architecture part), to be consistent.

Reported-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/elf2flt: remove backported patch

The patch added by [1] to fix a segfault with elf2flt when binutils
2.33.1 is used on ARM, introduce a regression with previous binutils
version on m68k and ARM.

Theses issues has been reported upstream [2] [3] but there is no
definitive solution.

The binutils 2.33.1 has been disabled for configurations using
BR2_BINFMT_FLAT by the previous commit, so we can safely remove
the patch.

Fixes:
[acpica-20191018]
http://autobuild.buildroot.net/results/81ee33eb606062a62765d95b66a26f130d280c53
[augeas-1.12.0]
http://autobuild.buildroot.net/results/4e1f7f335d2c853e2a5e6ad96c14157ba8f003c7
[cairo-1.16.0]
http://autobuild.buildroot.net/results/976d99bc9b052f8d9429e666ac7fff7768ffff6b
[fontconfig-2.13.1]
http://autobuild.buildroot.net/results/4a5a8cb6411d709acb7ea8c83b3c8e45fdc0a10b
[gptfdisk-1.0.4]
http://autobuild.buildroot.net/results/6db5f9d8663730a54b04c1e624438095598b2573
[libopenssl-1.1.1d]
http://autobuild.buildroot.net/results/acf87e81130e85e7fb05edf5f6dedf095f16e226
[mimic-1.1.0]
http://autobuild.buildroot.net/results/61f53630ed85ee0d0d6dbf71012db77f4d7986ad
Maybe more...

[1] 2b064f86b6a0fd683f307b51f12d9d919fcaa386
[2] https://github.com/uclinux-dev/elf2flt/pull/16
[3] https://github.com/uclinux-dev/elf2flt/issues/12

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/binutils: disable binutils >= 2.33.1 for configurations using BR2_BINFMT_FLAT

The patch added by [1] to fix a segfault with elf2flt when binutils
2.33.1 is used on ARM, introduce a regression with previous binutils
version on m68k and ARM.

Theses issues has been reported upstreme [2] [3].

For now, disable binutils >= 2.33.1 for configurations using
BR2_BINFMT_FLAT.

[1] 2b064f86b6a0fd683f307b51f12d9d919fcaa386
[2] https://github.com/uclinux-dev/elf2flt/pull/16
[3] https://github.com/uclinux-dev/elf2flt/issues/12

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-setuptools-scm-git-archive: depends on python-setuptools-scm

python-setuptools-scm-git-archive requires python-setuptools-scm package so
add it to its dependencies.

Fixes:
http://autobuild.buildroot.net/results/b356c948cf2b22534ca333cfe34dee31371c0007

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lxc: cgroups: initialize cpuset properly

The tests.package.test_lxc.TestLxc failure on gitlab
is similar to the issue reported by [1] and fixed by [2].

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255988

[1] https://github.com/NixOS/nixpkgs/issues/75467#issuecomment-569386159
[2] https://github.com/lxc/lxc/pull/3109

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mosquitto: bump to v1.6.9

mosquitto 1.6.9 is a bugfix release, see the announcement:
https://mosquitto.org/blog/2020/02/version-1-6-9-released/

Also update the indentation of the hash file to 2 spaces,
and add URL of the GPG signature in hash file comment.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wireshark: security bump to v3.2.2

This fixes the following CVEs:
 - CVE-2020-9428:
   In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
   the EAP dissector could crash. This was addressed in
   epan/dissectors/packet-eap.c by using more careful sscanf parsing.

 - CVE-2020-9429:
   In Wireshark 3.2.0 to 3.2.1, the WireGuard dissector could crash.
   This was addressed in epan/dissectors/packet-wireguard.c by
   handling the situation where a certain data structure intentionally
   has a NULL value.

 - CVE-2020-9430:
   In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
   the WiMax DLMAP dissector could crash.
   This was addressed in plugins/epan/wimax/msg_dlmap.c by validating
   a length field.

 - CVE-2020-9431:
   In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
   the LTE RRC dissector could leak memory. This was addressed in
   epan/dissectors/packet-lte-rrc.c by adjusting certain append operations.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/systemd: also fix rpath for machine-id-setup

Fixes: #12576
Reported-by: Melanie <melanie@trash-mail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/systemd: also fix rpath for nspawn

Fixes:
    http://autobuild.buildroot.org/results/e03ae6a3209eea00459b94cee9c10fd4f2184fec/

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvorbis: annote CVE-2018-10393

bark_noise_hybridmp in psy.c in Xiph.Org libvorbis 1.3.6 has a
stack-based buffer over-read.

Same patch as for CVE-2017-14160

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
  - update 0001-*.patch to also reference CVE-2018-10393
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libvorbis: fix CVE-2018-10392

mapping0_forward in mapping0.c in Xiph.Org libvorbis 1.3.6 does not
validate the number of channels, which allows remote attackers to cause
a denial of service (heap-based buffer overflow or over-read) or
possibly have unspecified other impact via a crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/blktrace: fix CVE-2018-10689

blktrace (aka Block IO Tracing) 1.2.0, as used with the Linux kernel and
Android, has a buffer overflow in the dev_map_read function in
btt/devmap.c because the device and devno arrays are too small, as
demonstrated by an invalid free when using the btt program with a
crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: test_systemd.py: add linux fragment to enable CONFIG_BINFMT_MISC

While investigating [1] one units failed due to missing kernel option
CONFIG_BINFMT_MISC needed by "proc-sys-fs-binfmt_misc.mount" service.

It's because the kernel support autofs4 but not MISC binaries.

Since the systemd test infra use the default defconfig (vexpress),
we need to provide a linux fragment to enable CONFIG_BINFMT_MISC.

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/454255917

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
  - move the kernel config with the others in conf/
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/systemd: random-seed: add missing header for GRND_NONBLOCK

GRND_NONBLOCK has been introduced with the 3.17 kernel version [1]
while adding getrandom(2) system call.

The header missing_random.h is needed for random-seed.c when building
with old toolchain, such Sourcery CodeBench ARM 2014.05 (kernel headers
3.13).

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255917

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=c6e9d6f38894798696f23c8084ca7edbf16ee895

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pure-ftpd: fix CVE-2020-9365

An issue was discovered in Pure-FTPd 1.0.49. An out-of-bounds (OOB) read
has been detected in the pure_strcmp function in utils.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pure-ftpd: fix CVE-2019-20176

In Pure-FTPd 1.0.49, a stack exhaustion issue was discovered in the
listdir function in ls.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2020-8112

opj_t1_clbl_decode_processor in openjp2/t1.c in OpenJPEG 2.3.1 through
2020-01-28 has a heap-based buffer overflow in the qmfbid==1 case, a
different issue than CVE-2020-6851.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2020-6851

OpenJPEG through 2.3.1 has a heap-based buffer overflow in
opj_t1_clbl_decode_processor in openjp2/t1.c because of lack of
opj_j2k_update_image_dimensions validation.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2019-12973

In OpenJPEG 2.3.1, there is excessive iteration in the
opj_t1_encode_cblks function of openjp2/t1.c. Remote attackers could
leverage this vulnerability to cause a denial of service via a crafted
bmp file. This issue is similar to CVE-2018-6616.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/emlog: annotate CVE-2019-16868 and CVE-2019-17073

CVE-2019-16868 and CVE-2019-17073 are misclassified (by our CVE tracker)
as affecting emlog, while in fact it affects http://www.emlog.net.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/linux-firmware: add missing symlinks

As of upstream commit 9cfefbd7fbdaa5ae769e3061c463f8345d146fb7
we must manually create symlinks as they are no longer present
in the archive but created at installation.

Fixes:
    http://autobuild.buildroot.net/results/46fdacbe4064d72aaafa9f52741121d8e4fe64ab/

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/shellinabox: fix CVE-2018-16789

libhttp/url.c in shellinabox through 2.20 has an implementation flaw in
the HTTP request parsing logic. By sending a crafted multipart/form-data
HTTP request, an attacker could exploit this to force shellinaboxd into
an infinite loop, exhausting available CPU resources and taking the
service down.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/suricata: fix CVE-2019-18792

An issue was discovered in Suricata 5.0.0. It is possible to
bypass/evade any tcp based signature by overlapping a TCP segment with a
fake FIN packet. The fake FIN packet is injected just before the PUSH
ACK packet we want to bypass. The PUSH ACK packet (containing the data)
will be ignored by Suricata because it overlaps the FIN packet (the
sequence and ack number are identical in the two packets). The client
will ignore the fake FIN packet because the ACK flag is not set. Both
linux and windows clients are ignoring the injected packet.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcgroup: fix CVE-2018-14348

libcgroup up to and including 0.41 creates /var/log/cgred with mode 0666
regardless of the configured umask, leading to disclosure of information

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs:nitrogen{6sx, 6x, 7, 8m}: fix typo in kernel headers version

A typo has been introduced during the last version bump [1].

[1] 00252b101a86ef136fc4afc045ba16324cbccb3b

Fixes:
[nitrogen6sx]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255632
[nitrogen6x]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255635
[nitrogen7]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255638
[nitrogen6m8]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255640

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/exiv2: annotate CVE-2019-13504

CVE-2019-13504 is misclassified (by our CVE tracker) as affecting
version 0.27.2, while in fact both commits that fixed this issue are
already in this version: bd0afe039043 and 54f0bebca032.

(From: https://security-tracker.debian.org/tracker/CVE-2019-13504)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/exiv2: fix CVE-2019-20421

In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input
file can result in an infinite loop and hang, with high CPU consumption.
Remote attackers could leverage this vulnerability to cause a denial of
service via a crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cairo: fix CVE-2018-19876

Add an upstream patch to fix CVE-2018-19876: cairo 1.16.0, in
cairo_ft_apply_variations() in cairo-ft-font.c, would free memory using a
free function incompatible with WebKit's fastMalloc, leading to an
application crash with a "free(): invalid pointer" error.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rdesktop: add xlib_libXrandr optional dependency

xlib_libXrandr is an optional dependency since version 1.7.0 and
https://github.com/rdesktop/rdesktop/commit/6ee9faeffcd9dd2e4c262d732e15a3a02278578d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exiv2: fix CVE-2019-17402

Exiv2 0.27.2 allows attackers to trigger a crash in Exiv2::getULong in
types.cpp when called from Exiv2::Internal::CiffDirectory::readDirectory
in crwimage_int.cpp, because there is no validation of the relationship
of the total size to the offset and size.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rdesktop: security bump to version 1.8.6

- Fix CVE-2019-15682: RDesktop version 1.8.4 contains multiple
  out-of-bound access read vulnerabilities in its code, which results in
  a denial of service (DoS) condition. This attack appear to be
  exploitable via network connectivity. These issues have been fixed in
  version 1.8.5
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openrc: remove keymaps units if kbd package is not selected

keymaps and save-keymaps require kbd_mode and dumpkeys, respectively, so
remove them if the kbd package is not selected (e.g. devices with serial
console, only).

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
  - expand to three commands to match the existing hook
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qpdf: fix comment

Commit 3f9bcc01b3ef94c8f138b6dccc861d9e222de5ef forgot to update comment

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qpdf: needs wchar

Upstream was not too keen [0] on applying fixes for toolchains without
wchar, so just require that.

The sole user selecting qpdf already depends on wchar, so update the
comment accordingly.

[0] https://github.com/qpdf/qpdf/pull/405#issuecomment-592971907

Fixes:
 - http://autobuild.buildroot.org/results/99c82d4775ed44bd04d0a48188ff590dcba73d69

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: drop the patch, add the dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openrc: fix post-install-target addition

OPENRC_POST_TARGET_INSTALL_HOOKS -> OPENRC_POST_INSTALL_TARGET_HOOKS

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/boost: annotate _IGNORE_CVES for CVE-2009-3654

This CVE does not affect the boost package, but is misclassified by our
CVS tracker. As per the advisory:

    Unspecified vulnerability in Boost before 6.x-1.03, a module for
    Drupal, allows remote attackers to create new webroot directories
    via unknown attack vectors.

Ignore the CVS, and expand a comment to explain it.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: expand the comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgdiplus: backport of fix for GifQuantizeBuffer

In newer version of giflib the GifQuantizeBuffer code was removed.

libgdiplus included the needed function by their own:
(https://github.com/mono/libgdiplus/pull/575).

This patch will become obsolete once libgdiplus is bumped to version 6.x.

Fixes:
http://autobuild.buildroot.net/results/46c5cf068cf9ea50e53491870d9dbf3f134c8c22

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openrc: needs kmod

openrc provides scripts that have been written for the big-gun kmod, and
so use options unknown to the busybox' provided applets:

  - Busybox modprobe does not have a "--first-time" option,
  - the "--verbose" option is just "-v",
  - the "--use-blacklist" option is just "-b". Also blacklist support is
    not selected in our default busybox configuration.

One of two options, is to "fix" or "adapt" openrc's scripts to busybox,
which means for the openrc package to go peek into files from the
busybox package, which is not nice, and can't work because that is not
available by the time we scan our Makefiles.

The other option, which this patch implements, is to just add a
dependency onto kmod and its tools.

Reported-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic.mk: in image install, print message before pre-hooks

In all steps, we print the message indicating the start of the step
using the MESSAGE macro before running pre-hooks. Except in the image
installation step, where the message is printed after the pre-hooks.

Let's fix this inconsistency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: fix systemd service binary path

modern versions of exim are installed into sbin not bin

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libarchive: security bump to version 3.4.2

- Fix CVE-2020-9308: archive_read_support_format_rar5.c in libarchive
  before 3.4.2 attempts to unpack a RAR5 file with an invalid or
  corrupted header (such as a header size of zero), leading to a SIGSEGV
  or possibly unspecified other impact.
- use --with-nettle to enable nettle support, see
  https://github.com/libarchive/libarchive/commit/f96a71144b7725ca4a94d84bd27d7dca8c2f58d2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
  - drop new optional dependency to mbedtsl, forced off for now
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lxc: fix build with ultrasparc

Fixes:
 - http://autobuild.buildroot.org/results/17c2319850f02f24da6fbef9656c07f86fdc5a3a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libssh2: fix CVE-2019-17498

In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in
packet.c has an integer overflow in a bounds check, enabling an attacker
to specify an arbitrary (out-of-bounds) offset for a subsequent memory
read. A crafted SSH server may be able to disclose sensitive information
or cause a denial of service condition on the client system when a user
connects to the server.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/poco: PDF needs XML, JSON and Util

PDF needs XML, JSON and Util since version 1.9.0 and
https://github.com/pocoproject/poco/commit/c5acb2ac27a81a429e146780769f965e8284cadc

Fixes:
 - http://autobuild.buildroot.org/results/294b604a0e37aafbe085f0e6f0d1a83ab110c3a4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/dnsmasq: fix CVE-2019-14834

A vulnerability was found in dnsmasq before version 2.81, where the
memory leak allows remote attackers to cause a denial of service
(memory consumption) via vectors involving DHCP response creation.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lz4: security bump to version 1.9.2

- Fix CVE-2019-17543: LZ4 before 1.9.2 has a heap-based buffer overflow
  in LZ4_write32 (related to LZ4_compress_destSize), affecting
  applications that call LZ4_compress_fast with a large input. (This
  issue can also lead to data corruption.) NOTE: the vendor states "only
  a few specific / uncommon usages of the API are at risk."
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squid: security bump to version 4.10

Drop patch (already in version)
Update indentation of hash file (two spaces)

Fix the following issues:
 - CVE-2020-8517: Buffer Overflow issue in ext_lm_group_acl helper.
 - CVE-2019-12528: Information Disclosure issue in FTP Gateway.
 - CVE-2020-8449, CVE-2020-8450: Improper Input Validation issues in
   HTTP Request processing.
 - CVE-2019-18679: Information Disclosure issue in HTTP Digest
   Authentication.
 - CVE-2019-18678: HTTP Request Splitting issue in HTTP message
   processing.
 - CVE-2019-18677: Cross-Site Request Forgery issue in HTTP Request
   processing.
 - CVE-2019-12523, CVE-2019-18676: Multiple issues in URI processing.
 - CVE-2019-12526: Heap Overflow issue in URN processing.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zsh: security bump to version 5.8

- Fix CVE-2019-20044: In Zsh before 5.8, attackers able to execute
  commands can regain privileges dropped by the --no-PRIVILEGED option.
  Zsh fails to overwrite the saved uid, so the original privileges can
  be restored by executing MODULE_PATH=/dir/with/module zmodload with a
  module that calls setuid().
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ntfs-3g: annotate _IGNORE_CVES for the included security patch

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linknx: host-pkgconf is mandatory

host-pkgconf is a mandatory dependency, this will fix per-package build

Fixes:
 - http://autobuild.buildroot.org/results/cfda0ce53165bb22b691b5b6510f0ab096a41e17

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add Michael Fischer for gnuplot and sdl2

Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-generic: make file list logic parallel build compatible

The current solution used to collect the list of files installed by
packages does not work for top-level parallel build. Indeed, we rely
on a file created after the installation of the previous package to
build the list of files installed by the current package.

This works well when packages are built sequentially, but badly fails
when using top-level parallel build.

More specifically, top-level parallel build can fail with:

comm: /home/thomas/buildroot/output/build/.files-list-host.new: No such file or directory

Because that file has been removed concurrently by the build process
of another package.

This commit reworks the logic in a very straight-forward way. Before
the installation of each package, we store the list of files that are
already installed and store it in the package build directory. After
the installation of each package, we store again that list of files,
calculate the difference with the before file, and store that as the
list of files installed by that package, still in the package build
directory.

At the end of the build, in target-finalize we collect all the
collected information into the global package file lists, that
continue to be installed in the same location as before, with the same
name.

There are however some differences:

 (1) The files are no longer ordered in build order, but by alphabetic
     ordering of packages. Indeed, "build order" no longer makes any
     sense in the context of top-level parallel build.

 (2) Some files which were incorrectly tracked are no longer
     tracked. For example, the toolchain package is a target package,
     but it installs files in $(HOST_DIR). In the previous logic, the
     files installed by the toolchain package in $(HOST_DIR) were
     incorrectly affected to the next host package that was installed
     after the toolchain package. With our new logic, those files are
     no longer tracked at all. To fix this, we would have to change
     the logic to scan HOST_DIR/TARGET_DIR/STAGING_DIR for all
     installation steps, not just for the install-host, install-target
     and install-staging steps respecitively. But the result was
     already incorrect anyway, and therefore this should be fixed
     separately.

Note that the check_bin_arch hook needs to be adjusted: it was using
the global package-file-list.txt file, but this file is now created
only at the very end of the build. So instead, we use the current
package .file-list.txt file to know which packages have been installed
by the current package in $(TARGET_DIR).

Fixes:

  http://autobuild.buildroot.net/results/4e60fa31b1cd08bc7fdf9c5dd3a3f4941e029ba3/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic.mk: simplify step_pkg_size

Use the same trick in step_pkg_size as the one used in check_bin_arch:
factorize the two $(filter ...) calls into one, checking in one step
the step and whether it's the beginning or end of the step.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python3: bump to version 3.8.2

Bugfix release, fixing a number of issues.  For details, see the
announcement:

https://docs.python.org/release/3.8.2/whatsnew/changelog.html#python-3-8-2-final

Adjust the spacing in the hash file and update the hash of the license file
for a change in copyright years:

-2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Python Software Foundation;
+2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Python Software Foundation;

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/git: make _BUG_ condition more clear

As pointed by Peter combined condition of the 2 gcc bugs is potentially
wrong, but as Thomas pointed in this case it's not harmful. Let's fix it
anyway since it's basically wrong even it doesn't cause harm.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/swig: create a legacy symlink for swig3.0

The host-swig package installs the swig binary as 'swig' and adds a
swig<major> symlink (E.G.  swig4.0).  This causes issues for older software
which may not know about the 4.0 version of swig, E.G.  CMake 3.10.x
contains the following swig detection logic:

find_program(SWIG_EXECUTABLE NAMES swig3.0 swig2.0 swig)

If the host has a 3.x or 2.x variant of swig installed, then that will be
used instead of our host-swig.

As a workaround, also add a swig3.0 symlink so our host-swig will be used.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Peter: reworded]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/proftpd: security bump to version 1.3.6c

Fixes the following security issues:

- CVE-2020-9273: In ProFTPD 1.3.7, it is possible to corrupt the memory pool
  by interrupting the data transfer channel.  This triggers a use-after-free
  in alloc_pool in pool.c, and possible remote code execution.

And additionally, fixes a number of other issues.  For details, see the
release notes:

https://github.com/proftpd/proftpd/blob/1.3.6/RELEASE_NOTES

This also bumps the bundled libcap, so
0001-fix-kernel-header-capability-version.patch can be dropped.

While we are at it, adjust the white space in the .hash function to match
the new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone_qt5_defconfig: kernel builds needs host-openssl

Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.

Fixes:

914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915  #include <openssl/bio.h>

https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/{at91, atmel}*_defconfig: move to bluez5_utils

Commit 61a813339af43 (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs.  Fix them by changing to
bluez5-utils instead.

Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/docker-compose: update patch to allow all pyyaml 5.x versions

The recent bump of python-pyyaml to version 5.3 causes a runtime
failure in docker-compose:

pkg_resources.ContextualVersionConflict: (PyYAML 5.3 (/usr/lib/python3.8/site-packages), Requirement.parse('PyYAML<5.2,>=3.10'), {'docker-compose'})

https://gitlab.com/buildroot.org/buildroot/-/jobs/442151461

Fix it by adjusting 0003-support-PyYAML-up-to-5.1-version.patch to
allow all pyyaml 5.x versions, similar to what upstream has done
post-1.24.1:

https://github.com/docker/compose/commit/c818bfc62c0574009175d832c1a8a2857bf1b1bf

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: disable systemd for host build

When building host-util-linux, the systemdsystemunitdir is set to the
real host directory, so the install step fails with:

/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.service': Permission denied
/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.timer': Permission denied

Since we don't need systemd support in host-util-linux, unconditionally
disable it for the host build.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale: use correct ahab-container.img file name

Commit 3f8ace002831a01ed6aec59b704bd92c8a3b957f
("board/freescale/common/imx: add support for i.MX8") had its
conflicts incorrectly tweaked when applied to Buildroot. The
ahab-container.img is installed with this name (ahab-container.img) by
the imx-firmware package, and not mx8qm-ahab-container.img or
mx8qx-ahab-container.img.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/brltty: use host pkg-config when building host tools

brltty builds host tools which rely on the expat library, and
pkg-config is used to detect the expat library.

Since commit cd16e18584066d2817d3acb3822e173f9f23455e ("pkgconf:
always keep system libs"), the wrapper script added
--keep-system-libs, which adds a -L$(STAGING_DIR)/usr/lib to the
pkg-config results instead of just -lexpat. So, previously, by chance,
the pkg-config result for the target expat was "good enough" for the
host expat as well. But now that -L$(STAGING_DIR)/usr/lib is added, it
breaks the build in all sort of ways as obviously building host
binaries with the library search path pointing to $(STAGING_DIR) is
not a good idea.

To fix that, this commit adjusts the brltty build system so that the
PKG_CONFIG_FOR_BUILD variable is used when using pkg-config to build
host binaries.

Fixes:

  http://autobuild.buildroot.net/results/5a64dfb845389882c366b6c91aaf5868c090a802/

Many thanks to the initial work from Fabrice Fontaine at
http://patchwork.ozlabs.org/patch/1238163/ which provided an initial
starting point for this investigation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>