xapp_viewres: fix build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

xapp_viewres uses the appdefaultdir variable from xt.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.

Fixes:
 - http://autobuild.buildroot.org/results/71b5fb2b5df30e25dacdef71f7aaddbecbf8bde6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

xapp_beforelight: fix build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

xapp_beforelight uses the appdefaultdir variable from xt.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the appdefaultdir to
use explicitly instead of relying on xt.pc.

Fixes:
 - http://autobuild.buildroot.org/results/164bb80f261f48525de508b5f74321f2fec91cce

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpam-tacplus: fix compilation with GCC 8

GCC 8 demands that the size of the string copied by strncpy be smaller
than the size of the destination to keep space for the trailibg '\0'.
This causes a compilation error in pam_tacplus, so add a patch already
sent uptream to fix it.

Fixes:
  http://autobuild.buildroot.net/results/da6d150e470046c03c5f7463de045604e15e4a30/

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/i2c-tools: bump to version 4.1

Drop upstream patches.

Rename 'prefix' to 'PREFIX' following upstream change.

Update README hash for build documentation changes unrelated to license.

Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/acpid: fix acpid.service permissions

Execution permissions cause systemd to throw runtime warnings since
systemd service files are essentially a type of configuration file and
are not designed to be executed like init scripts.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wayland-protocols: bump to version 1.17

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wayland: bump to version 1.16.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libgpgme: properly tweak gpgme-config

libgpgme installs a gpgme-config script, it should be tweaked using
the <pkg>_CONFIG_SCRIPTS mechanism. This is generally useful and is
going to be particularly important with per-package directories.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libva: fix build with pkgconf 1.5.3

Set ac_cv_path_WAYLAND_SCANNER to the wayland-scanner in the host
directory otherwise build will fail because libva will use pkgconfig to
find it

Fixes:
 - http://autobuild.buildroot.org/results/836d3a7085c576f607b1532d5204a54d6c2c1e66

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mqevk: bump packages to imx_4.14.62_1.0.0_beta

Bump kernel, U-Boot and ATF packages to the NXP imx_4.14.62_1.0.0_beta
release.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add intel-microcode and pcm-tools to my watch list

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cryptopp: change site to https to avoid a redirection

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libinput: bump to version 1.12.3

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/grub: fix grub-mkimage with binutils >= 2.31

While using pc_x86_64_efi_defconfig with a bleeding-edge x86_64 toolchain
based on binutils 2.31, the grub-mkimage command return this error:

grub-mkimage: error: relocation 0x4 is not implemented yet.

Backport an upstream patch [1] as suggested on openembedded mailing list [2].

[1] http://git.savannah.gnu.org/cgit/grub.git/commit/?id=842c390469e2c2e10b5aa36700324cd3bde25875
[2] http://lists.openembedded.org/pipermail/openembedded-core/2018-July/153054.html

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

clamav: add optional systemd dependency

clamav has an optional systemd dependency

Moreover, since the bump to 1.5.3, pkgconf prepends the sysroot to all
absolute paths found in the .pc file. This is correct when the paths
refer to something in STAGING_DIR (e.g. libdir, includedir), but not
when it refers to something used for the target.

clamav uses the systemdsystemunitdir variable from systemd.pc to decide
where to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the
systemdsystemunitdir to use explicitly instead of relying on systemd.pc.

Fixes:
 - http://autobuild.buildroot.org/results/fe526c60542527112e6441e453b4df5de49242d9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libv4l: fix udev build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

libv4l uses the udevdir variable from libudev.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the udevdir to use
explicitly instead of relying on libudev.pc.

Fixes:
 - http://autobuild.buildroot.org/results/597cd814225c2af9b896a1f25f98cdff33fd810a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

bluez5_utils: fix build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

bluez5_utils uses the sysconfdir variable from dbus-1.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the sysconfdir to use
explicitly instead of relying on dbus-1.pc.

Fixes:
 - http://autobuild.buildroot.org/results/498e7e368fbb3d69c2f311e3e5bc213e507b8023

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iwd: fix dbus build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

iwd uses the datadir variable from dbus-1.pc to decide where to install
things. Since DESTDIR is prepended to the install destination, this will
end up in the wrong location.

Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on dbus-1.pc.

Fixes:
 - http://autobuild.buildroot.org/results/2b9e28264248f073cc9973bd4c7a89363ec9c0c3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

acsccid: fix build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

acsccid uses the usbdropdir variable from libpcsclite.pc to decide where
to install things. Since DESTDIR is prepended to the install
destination, this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.

Fixes:
 - http://autobuild.buildroot.org/results/9dc76478d81ea2469900a4b4aab0e31fee9c4032

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ccid: fix build with pkgconf 1.5.3

Since the bump to 1.5.3, pkgconf prepends the sysroot to all absolute
paths found in the .pc file. This is correct when the paths refer to
something in STAGING_DIR (e.g. libdir, includedir), but not when it
refers to something used for the target.

ccid uses the usbdropdir variable from libpcsclite.pc to decide where to
install things. Since DESTDIR is prepended to the install destination,
this will end up in the wrong location.

Until a better solution is found in pkgconf, pass the usbdropdir to use
explicitly instead of relying on libpcsclite.pc.

Fixes:
 - http://autobuild.buildroot.org/results/4d4c1ba7f5d00d1b927ac01ef9851468abfbdff2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uclibc: add custom bits/poll.h for xtensa

Definitions of POLLWRNORM, POLLWRBAND and POLLREMOVE in xtensa linux
kernel are non-standard. Provide bits/poll.h with correct values for
these constants for uclibc-ng.

This fixes the following strace build errors:

  In file included from xlat/pollflags.h:4:0,
                   from poll.c:34:
  ./static_assert.h:40:24: error: static assertion failed: "POLLWRBAND != 0x0100"
   # define static_assert _Static_assert
                          ^
  xlat/pollflags.h:75:1: note: in expansion of macro ‘static_assert’
   static_assert((POLLWRBAND) == (0x0100), "POLLWRBAND != 0x0100");
   ^~~~~~~~~~~~~
  ./static_assert.h:40:24: error: static assertion failed: "POLLREMOVE != 0x0800"
   # define static_assert _Static_assert
                          ^
  xlat/pollflags.h:117:1: note: in expansion of macro ‘static_assert’
   static_assert((POLLREMOVE) == (0x0800), "POLLREMOVE != 0x0800");
   ^~~~~~~~~~~~~

Fixes:
 http://autobuild.buildroot.net/results/5a0112b7a2c81fa5253c9adc93efe415256cd811
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/liquid-dsp: add missing dependency on fftw

When one of BR2_PACKAGE_FFTW_PRECISION_* is enabled, liquid-dsp links
against fftw3f, fftw3 or fftw3l, but forgets to add the fftw package
in its dependencies. It works fine in practice because "fftw" is
before "liquid-dsp" in the alphabetic ordering, but building with
"make liquid-dsp" or with per-package directory causes a build
failure.

Fix that by adding the missing dependencies.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sdl2_net: add missing host-pkgconf dependency

The sdl2_net configure script uses pkg-config to finx sdl2. If it
doesn't find pkg-config, it tries to locate sdl2-config, and defaults
to /usr/bin/sdl2-config, which causes the build to fail with:

arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL2'

Fix this by adding host-pkgconf to the dependencies of sdl2_net. We
could have added the right autoconf cache variable to tell the
configure script where sdl2-config is located, but since pkg-config is
tried first, let's use that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/trinity: fix build with kernel headers v4.19

Kernel v4.19 introduced a change in linux/rds.h UAPI header that causes
networking definitions collision with libc headers. Add a patch fixing
that be reordering the include list.

Fixes:
http://autobuild.buildroot.net/results/b30/b30993de10c909602ec2e9098a91e400fa9c91f6/
http://autobuild.buildroot.net/results/96d/96deb94e5f959c844060d449fae5668c5f3c5571/
http://autobuild.buildroot.net/results/c7a/c7aa75fd8faad7ac49492497807d1a7fe4c4f955/

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netsurf: add dependency on host-libpng for sdl

libpng is used by the convert_image host tool, which is built when SDL
is enabled.

Fixes:
http://autobuild.buildroot.net/results/d0b/d0bbd563fe5c9463316b2ba0d7ef5553be0563bc/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/intel-microcode: don't use install -D -t

Commit 1f0beaf9a8e2b8f0bb6e53694b38d70900b9128f ("intel-microcode:
bump to version 20180807a") introduced the use of "install -D -t" to
the intel-microcode package. The intent is that install will create
the full destination directory, including all components leading to
it, before copying the files.

Unfortunately, "install -D -t" is only supported since coreutils since
v8.23. Several of the build systems we support have older coreutils
versions, such as Debian 7, which uses coreutils 8.13. Ubuntu 14.04
also doesn't have a recent enough coreutils.

So let's create the directory explicitly first, and then use a more
regular "install -t".

Fixes:

  http://autobuild.buildroot.net/results/aa44f9ff90f296f886be6309b3355ed075494fb2/

Note: the "gzip: stdout: Broken pipe" messages in those failures seem
unrelated. We have been able to reproduce the installation failure
without those "Broken pipe" issues, and we have not been able to
reproduce those "Broken pipe" problems.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lua-cqueues: needs host-m4

The lua-cqueues build system uses m4 during the build:

cd /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src && m4 /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.m4 >| /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.tmp

Therefore, the package should depend on host-m4. This has been
detected using per-package directory support, but a minimal defconfig
with just lua and lua-cqueues on a system that doesn't have m4
installed system-wide also exhibits the issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/wine: host-wine also needs bison and flex

Just like the build of the target wine, the build of host wine also
needs bison and flex, otherwise the build fails with:

checking for flex... no
configure: error: no suitable flex found. Please install the 'flex' package.

(and similarly for bison once host-flex is provided)

This was detected using per-package directories. It used to "work"
because host-wine comes alphabetically after host-flex and host-bison,
which are dependencies of target wine.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

syslog-ng: rewrite init script

- Rename it to S01syslog-ng to make every init script be called the same
  as the executable it starts.
- Indent with tabs, not spaces.
- Do not kill syslog-ng in "reload". Send a SIGHUP signal, instructing
  it to perform a re-initialization.
- Support a /etc/default/syslog-ng configuration file.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

sysklogd: rewrite init script

- Split it into S01syslogd and S02klogd to make every init script be
  called the same as the executable it starts.
- Implement start, stop, restart and reload as functions, like in other
  init scripts, using start-stop-daemon.
- Indent with tabs, not spaces.
- Detect and report start/stop errors (previous version ignored them and
  always reported OK).
- Support /etc/default/$DAEMON configuration files.
- Do not kill syslogd in "reload". Send a SIGHUP signal, instructing it
  to perform a re-initialization.
- Do not kill klogd in "reload". Send a signal (default 0, which does
  nothing).  Users can configure this signal in /etc/default/klogd to
  either SIGUSR1 or SIGUSR2.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

rsyslog: rewrite init script

- Rename it to S01rsyslogd to make every init script be called the same
  as the executable it starts.
- Support a /etc/default/rsyslogd configuration file.
- Indent with tabs, not spaces.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

busybox: rewrite logging init script

- Split S01logging into S01syslogd and S02klogd. Install them only if no
  other syslog package is selected and the corresponding daemons are
  selected in the Busybox configuration.
- Support /etc/default/$DAEMON configuration files.
- Detect and report start/stop errors (previous version ignored them and
  always reported OK).
- Use a separate function for restart.
- Implement reload as restart.

The dependency of busybox on rsyslog and syslog-ng was only needed
because those packages also installed S01logging. Since now they no
longer install the same file, these dependencies are no longer needed.
The dependency on sysklogd is still needed since that one installs the
syslogd and klogd executables with the same name as busybox.

The -n option of syslogd/klogd is obligatory because start-stop-daemon
starts it in the background. Therefore, move it out of the
SYSLOGD_ARGS resp. KLOGD_ARGS variable so the user can no longer remove
it.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Arnout: keep dependency on sysklogd]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/waf: purge trailing '/' from WAF_SITE

<PKG>_SITE cannot have a trailing slash.

This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cryptopp: purge trailing '/' from CRYPTOPP_SITE

<PKG>_SITE cannot have a trailing slash.

This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pkgconf: purge trailing '/' from PKGCONF_SITE

<PKG>_SITE cannot have a trailing slash.

This was not detected by the check in generic-package because it is a
host-only package without Config.in symbol.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/netsurf: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
 - rename BR2_PACKAGE_NETSURF_FRAMEBUFFER to BR2_PACKAGE_NETSURF_SDL,
   and use "sdl" everywhere instead of "framebuffer", since really SDL
   can display on something else than the framebuffer
 - use a "depends on BR2_PACKAGE_LIBGTK2" instead of a "depends on
   BR2_PACKAGE_XORG7 + many other depends on + select
   BR2_PACKAGE_LIBGTK2"
 - use PKG_CONFIG_HOST_BINARY for the pkg-config path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-sentry-sdk: new package

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: do not change QMAKE_COMPILER in g++-base.conf

The variable QMAKE_COMPILER determines the compiler flavour (e.g.
gcc, clang, llvm, msvc etc.) and not a compiler path. Changing
it confuses the platform test of the qt5webengine package
(mkspecs/features/platform.prf):

  defineTest(isPlatformSupported) {
    QT_FOR_CONFIG += gui-private
    linux {
      if(!gcc:!clang)|intel_icc {
        skipBuild("Qt WebEngine on Linux requires clang or GCC.")
        return(false)
      }
      gcc:!clang:!isGCCVersionSupported(): return(false)
    }
  }

Revert the variable change introduced by commit 'package/qt5/qt5base: use
ccache for building host code' ([2]).

Fixes raspberrypi3_qt5we_defconfig/qt5webengine build ([1]):

  Qt WebEngine on Linux requires clang or GCC.
  QtWebEngine will not be built.

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/131217091
[2] https://git.buildroot.net/buildroot/commit/?id=c2ea056a1b34fd1354100d08e603b9374e225968

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xcb-proto: remove pkgconf fix

Not needed anymore after pkgconf bump.

Fixes
http://autobuild.buildroot.net/results/175/1752915119b795c916d75594e51a7c79126afd5f/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 18.3.0

Rebased patch 0002 after upstream commit
https://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?h=18.3&id=6b8657aff0adb9952aa3178d3b332de19d354561

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: remove unused HOST_GCC_FAKE_TESTSUITE

HOST_GCC_FAKE_TESTSUITE was removed since commit [1].

[1] 545ca6a0f2f4e0d8b3812949476ac2856264b83c

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nodejs: security bump to version 8.14.0

Fixes the following security vulnerabilities:

- Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
- Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
- Node.js: Hostname spoofing in URL parser for javascript protocol
  (CVE-2018-12123)
- Node.js: HTTP request splitting (CVE-2018-12116)
- OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
- OpenSSL: Microarchitecture timing vulnerability in ECC scalar
  multiplication (CVE-2018-5407)

For more details, see the announcement:
https://nodejs.org/en/blog/release/v8.14.0/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scanpypi: import third party modules after the standard ones

Move imports from six package after the standard modules. Resolves
pylint warnings.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: fix compilation for arc-2018.09 in some cases

In some cases which seem to depend on how toolchain headers
got installed or configured we may face well-known by now failure
fixed in upstream with [1]:
------------------------------>8----------------------------
In file included from nat/linux-ptrace.c:20:
nat/linux-ptrace.h:175:22: error: expected identifier before numeric constant
 # define TRAP_HWBKPT 4
                      ^
nat/linux-ptrace.h:175:22: error: expected '}' before numeric constant
In file included from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/signal.h:58,
                 from build-gnulib/import/signal.h:52,
                 from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/sys/wait.h:36,
                 from ./common/gdb_wait.h:23,
                 from nat/linux-ptrace.c:24:
.../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/siginfo-consts.h:156:1: note: to match this '{'
 {
 ^
In file included from nat/linux-ptrace.c:20:
nat/linux-ptrace.h:175:22: error: expected unqualified-id before numeric constant
 # define TRAP_HWBKPT 4
                      ^
In file included from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/features.h:428,
                 from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/bits/libc-header-start.h:33,
                 from .../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/stdio.h:27,
                 from build-gnulib/import/stdio.h:43,
                 from ./common/common-defs.h:52,
                 from nat/linux-ptrace.c:19:
.../output/host/arc-buildroot-linux-gnu/sysroot/usr/include/sys/wait.h:158:1: error: expected declaration before '}' token
 __END_DECLS
 ^~~~~~~~~~~
------------------------------>8----------------------------

Back-porting the fix for ARC now to get predictably successful results.

[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=5a6c3296a7a90694ad4042f6256f3da6d4fa4ee8

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libopenssl: use HTTPS for URL

The host forces HTTPS regardless. This can be seen in the build logs:

 >>> host-libopenssl 1.0.2q Downloading
 URL transformed to HTTPS due to an HSTS policy
 --2018-12-10 09:53:27--  https://www.openssl.org/source/openssl-1.0.2q.tar.gz

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5virtualkeyboard: rewrap Config.in help text

check-package complains with:

package/qt5/qt5virtualkeyboard/Config.in:59: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)

So let's rewrap the Config.in help text.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpjsip: add optional dependency on libgsm

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpjsip: add optional dependency on speex

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpjsip: disable build of test binaries

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/asterisk: enable for uclibc toolchains

This patch extends the configure checks for re-entrant resolver
functions to fix uclibc builds.

Quoting Yann:
http://lists.busybox.net/pipermail/buildroot/2017-September/203004.html

"As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it."

Musl builds are still broken:

output/build/asterisk-16.0.0/include/asterisk/astmm.h:165:35:
 error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘->’ token
  Do_not_use_calloc__use_ast_calloc->fail(a, b)

output/build/asterisk-16.0.0/include/asterisk/astmm.h:169:77:
 error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘->’ token
  Do_not_use_free__use_ast_free_or_ast_std_free_for_remotely_allocated_memory->fail(a)

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/asterisk: bump version to 16.0.0

- removed patches applied upstream, re-numbered remaining patches
- not available for static builds anymore:
  https://github.com/asterisk/asterisk/commit/8e36064109b6fabc6cd8caa59e48f9b523c7485b
- fixed license hashes after upstream whitespace removal
  https://github.com/asterisk/asterisk/commit/fd0ca1c3f9b972a52d48a82b492fd6bac772dc78
- removed configure options not provided by upstream anymore
- fixed configure error, the file is included in asterisk source:
    checking for bridges/bridge_softmix/include/hrirs.h... configure:
    error: cannot check for file existence when cross compiling
- added "-without-pjproject-bundled" as noted in
  https://wiki.asterisk.org/wiki/display/AST/New+in+15
- upstream switched from ncurses to libedit:
  https://github.com/asterisk/asterisk/commit/d6fda173a40e078db219e9aaceb7f3ce9ba1b4e4
- added libatomic when needed
- updated core sound package

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/asterisk: libsrtp needs openssl

Fixes configure error

checking for the ability of -lsrtp2 to be linked in a shared object... yes
checking for srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80 in -lsrtp2... yes
checking for srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80 in -lsrtp2... no
checking for srtp_crypto_policy_set_aes_gcm_128_8_auth in -lsrtp2... no
checking for srtp_shutdown in -lsrtp2... yes
checking for srtp2/srtp.h... (cached) yes
configure: WARNING: ***
configure: WARNING: *** OpenSSL required when using libsrtp2, checking for libsrtp instead.
configure: WARNING: ***

using this defconfig:

BR2_PACKAGE_LIBSRTP=y
BR2_PACKAGE_ASTERISK=y

Please note that openssl support in libsrtp is not available for static
builds:
https://git.buildroot.net/buildroot/tree/package/libsrtp/libsrtp.mk#n27

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/liteboard: remove explicit getty port

Using default value (console) works well, so there is no reason to set
tty explicitly.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/chiliboard: remove explicit getty port

Using default value (console) works well, so there is no reason to set
tty explicitly. Additionally after selecting newer kernels (tested
with 4.19 and 4.20-rc3) ttyO0 no longer works due to missing device
node.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: offload .gitlab-ci.yml generation

GitLab has severe limitations imposed to triggers.
Using a variable in a regexp is not allowed:
|    only:
|        - /-$CI_JOB_NAME$/
|        - /-\$CI_JOB_NAME$/
|        - /-%CI_JOB_NAME%$/
Using the key 'variables' always lead to an AND with 'refs', so:
|    only:
|        refs:
|            - branches
|            - tags
|        variables:
|            - $CI_JOB_NAME == $CI_COMMIT_REF_NAME
would make the push of a tag not to trigger all jobs anymore.
Inheritance is used only for the second level of keys, so:
|.runtime_test: &runtime_test
|    only:
|        - tags
|tests.package.test_python_txaio.TestPythonPy2Txaio:
|    <<: *runtime_test
|    only:
|        - /-TestPythonPy2Txaio$/
would override the entire key 'only', making the push of a tag not to
trigger all jobs anymore.

So, in order to have a trigger per job and still allow the push of a tag
to trigger all jobs (all this in a follow up patch), the regexp for each
job must be hardcoded in the .gitlab-ci.yml and also the inherited
values for key 'only' must be repeated for every job.
This is not a big issue, .gitlab-ci.yml is already automatically
generated from a template and there will be no need to hand-editing it
when jobs are added or removed.

Since the logic to generate the yaml file from the template will become
more complex, move the commands from the main Makefile to a script.

Using Python or other advanced scripting language for that script would
be the most versatile solution, but that would bring another dependency
on the host machine, pyyaml if Python is used. So every developer that
needs to run 'make .gitlab-ci.yml' and also the docker image used in the
GitLab pipelines would need to have pyyaml pre-installed.
Instead of adding the mentioned dependency, keep using a bash script.

While moving the commands to the script:
 - mimic the behavior of the previous make target and fail on any
   command that fails, by using 'set -e';
 - break the original lines in one command per line, making the diff for
   any patch to be applied to this file to look nicer;
 - keep the script as simple as possible, without functions, just a
   script that executes from the top to bottom;
 - do not perform validations on the input parameters, any command that
   fails already makes the script to fail;
 - do not add an usage message, the script is not intended to be called
   directly.

This patch does not change functionality.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Thomas: make the script output on stdout rather than take the output
file name as second argument.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/aarch64_efi: needs host-{dosfstools, mtools}

Fixes:
    https://gitlab.com/ymorin/buildroot/-/jobs/131924126

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua: remove 5.2.x version

At this time :
- Lua 5.3.5 will be the last one of its serie.
- Lua 5.4 is up coming (lua-5.4.0-work2 is already available).
- Lua 5.2.4 was released on 2015.
For various reasons in the Lua ecosystem, the Lua 5.1 will stay.
On BR, Lua 5.3 is the default version since 2016.02.

So, the serie which could be removed is the 5.2.x.
We could wait some days for other user feedback.

Note: see discussion when 5.3.x was introduced :
http://lists.busybox.net/pipermail/buildroot/2015-January/117638.html

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5virtualkeyboard: add arrow key navigation build option

It allows controlling the keyboard using the arrow and return keys.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proftpd: add mod_sql_sqlite

Enable mod_sql_sqlite as a compile time option

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proftpd: fix typoes in Config.in help texts

mode_ -> mod_

Reported-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

.gitlab-ci.yml: store .config files as artefacts for defconfig tests

Add Buildroot's own .config file, as well as any package's .config file
(uclibc, linux, and busybox), for later inspection should a build fails,
notably due to changes in the kconfig-package infrastructure.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/nexbox_a95x: kernel needs host-openssl

Since commit 9f5b07fc64 ("configs: nexbox_a95x_defconfig: bump to
kernel 4.19.8"), the nexbox_a95x_defconfig needs host-openssl to build
the Linux kernel.

Fixes: https://gitlab.com/ymorin/buildroot/-/jobs/131924236
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: document <pkg>_KEEP_DEPENDENCIES in rebar-package infra

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-rebar.mk: change semantic of <PKG>_KEEP_DEPENDENCIES

Set it to NO by default and check if it is equal to NO. This is to
be more consistent with other boolean variables in Buildroot.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-rebar.mk: fix remove-rebar-config-dependencies

Handle the case where there is only one dependency described in
rebar.config, so when the line starts by '{deps' and ends by '}.'.
Before it was deleting this line but also all next lines until finding
a line that ends by '}.'.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/download/dl-wrapper: fix urlencode option never being sent to backend

Since commit 38de434123 ("download: fix file:// BR2_PRIMARY_SITE
(download cache)"), the urlencode option is no longer passed to the
download backend, because we use ${backend} instead of
${backend_urlencode}.

We must get the urlencode information from backend_urlencode.

Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-aiorwlock: new package

Read write lock for asyncio.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luajit: add option to enable Lua 5.2 compatibility

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: formatting tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkgconf: bump to 1.5.3, change upstream

The pkgconf project now has a website at pkgconf.org, and hosts its
tarballs at https://distfiles.dereferenced.org/pkgconf/, so this
commit updates the upstream location, and uses the xz-compressed
tarball as well.

pkgconf is bumped to 1.5.3. What prompted this update is the fact that
GStreamer uses the --define-prefix option when calling pkg-config, and
this option didn't exist in pkgconf 0.9.2.

The patch 0001-Fix-all-variables-sysroot-prefix-problem.patch is
dropped, because pkgconf now behaves properly, by prefixing all paths
with the sysroot. This has been verified by testing libdir and
includedir in zlib.pc, and adding some dummy pkgdatadir, mapdir and
sdkdir variables:

$ cat staging/usr/lib/pkgconfig/zlib.pc
prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
sharedlibdir=${libdir}
includedir=${prefix}/include
pkgdatadir=${prefix}/pouet
mapdir=${prefix}/this/is/map/dir
sdkdir=${prefix}/this/is/sdk/dir
[...]

$ ./host/bin/pkg-config --variable=libdir zlib
./host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib
$ ./host/bin/pkg-config --variable=includedir zlib
./host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include
$ ./host/bin/pkg-config --variable=mapdir zlib
./host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/this/is/map/dir
$ ./host/bin/pkg-config --variable=sdkdir zlib
./host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/this/is/sdk/dir
$ ./host/bin/pkg-config --variable=pkgdatadir zlib
./host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/pouet

So, the 0001-Fix-all-variables-sysroot-prefix-problem patch is no
longer necessary.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/prosody: bump to version 0.11.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc/7.4.0: remove upstream patch

0001-m68k-coldfire-pr68467.patch is already upstream and backported to
gcc 7.4.0 [1].

[1] https://github.com/gcc-mirror/gcc/commit/2d1d94491cc66e240f9ca2845ec64e8ffe851c74

Fixes:
https://gitlab.com/ymorin/buildroot/-/jobs/131924271
https://gitlab.com/ymorin/buildroot/-/jobs/131924272

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmbim: Bump to version 1.16.2

+ change website to https

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiojobs: new package

Jobs scheduler for managing background task (asyncio).

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiohttp-remotes: new package

Control remote side information.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiohttp-jinja2: new package

Jinja2 template renderer for aiohttp.web

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiohttp-security: new package

Security for aiohttp.web.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiohttp-sse: new package

Server-sent events support for aiohttp.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-aiohttp-session: new package

Sessions for aiohttp.web.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stress-ng: fix build without swapcontext

Fixes:
 - http://autobuild.buildroot.org/results/f2d3b06afa6e31527a71c03671c8f08eb3f46c36

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

minnowboard-max: defconfigs: bump kernel to 4.19.8

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmpd: fix build with strndup

Retrieve a patch from upstream to include config.h otherwise build will
fail when trying to redefine strndup:
libmpd-internal.h:210:10: error: expected identifier or '(' before '__extension__'
 char *   strndup     (const char *s, size_t n);

Indeed, without an include on config.h, HAVE_STRNDUP won't be defined

Fixes:
 - http://autobuild.buildroot.org/results/a174818fa768b029d19b033139f9c5e0aaaed149

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openzwave: fix restrict error with gcc 8

Fixes:
 - http://autobuild.buildroot.org/results/2a8d2c67bcd1a7c228e9196d3bdb7f608c44c856

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vte: needs gcc >= 4.8

Fixes:
 - http://autobuild.buildroot.org/results/6dada849a87b68f6f69e3ed760995e86dfa25ad6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5quickcontrols: fix hash file entry

Fix accidental hash entry change previous commit ('qt5: bump latest version
to 5.11.3' 85ecae213ae5d37c9ddb7390706c18b93035f63b).

Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5: bump latest version to 5.11.3

qt5base: remove 0005-Export-qt_open64-from-QtCore.patch (taken from upstream [1])

[1] http://code.qt.io/cgit/qt/qtbase.git/commit/?id=4fc4f7b0ce0e6ee186a7d7fe9b5dd20e94efe432

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: remove arm soft patch

The patch refers to [1] which says "Unfortuantely, arm-gcc defaults to
generating code for armv5t." Since we always explicitly pass the target
CPU for ARM, the default CPU shouldn't matter.

As suggested by Arnout [2], a test based on qemu_arm_versatile_defconfig
has been done without this patch and there is no regression.

[1] https://sourceware.org/ml/crossgcc/2008-05/msg00009.html
[2] http://lists.busybox.net/pipermail/buildroot/2018-May/222104.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: remove uclibc-conf patch

This patch is present in Buildroot since a long time and has been rebased on
several version of gcc without beqing upstreamed.  Also it only concern
contrib/regression, which is not used at all during the build...

As suggested by Arnout [1], a test based on qemu_x86_defconfig has
been done without this patch and there is no regression.

[1] http://lists.busybox.net/pipermail/buildroot/2018-May/222104.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: nexbox_a95x_defconfig: bump to kernel 4.19.8

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: bump to version 6.5.0

Remove upstream patches:

0002-fix-building-on-ppc64.patch
https://github.com/gcc-mirror/gcc/commit/765527ad3725c5f3e82ab2b8e5031120b409983d

0003-libsanitizer-Use-pre-computed-size.patch
https://github.com/gcc-mirror/gcc/commit/61f38c64c01a15560026115a157b7021ec67bd3b

942-Use-ucontext_t-not-struct-ucontext-in-linux-unwind.h.patch
https://github.com/gcc-mirror/gcc/commit/b685411208e0aaa79190d54faf945763514706b8

943-sanitizer-linux.patch
https://github.com/gcc-mirror/gcc/commit/8937b94d1a643fd9760714642296d034a45254a8

870-xtensa-fix-PR-target-82181.patch
https://github.com/gcc-mirror/gcc/commit/dbbb83538168c6648b53f5e164c3a30beda6464f

871-xtensa-fix-PR-target-65416.patch
https://github.com/gcc-mirror/gcc/commit/36f42654cbbc1df0e3d0040ba900c61980a8f8db

872-gcc-xtensa-fix-NAND-code-in-xtensa_expand_atomic.patch using patch
https://github.com/gcc-mirror/gcc/commit/9f149a1a929c0c6c22f572b1cd651c83ac83774c

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: bump to version 7.4.0

Remove upstream patches:

0002-fix-building-on-ppc64.patch
https://github.com/gcc-mirror/gcc/commit/aa65a43516da1d48011ef621ed5988289711d99b

0003-gcc-xtensa-fix-NAND-code-in-xtensa_expand_atomic.patch
https://github.com/gcc-mirror/gcc/commit/8709905244d50b9d81f85d534b21c29eb640078c

0003-xtensa-fix-PR-target-65416.patch
https://github.com/gcc-mirror/gcc/commit/5dcbd70ec0a97505d6153fcbc7ef899b5a2ec7fc

0004-libsanitizer-Use-pre-computed-size.patch
https://github.com/gcc-mirror/gcc/commit/61f38c64c01a15560026115a157b7021ec67bd3b

0005-gcc-xtensa-don-t-force-PIC-for-uclinux-target.patch
https://github.com/gcc-mirror/gcc/commit/6ef0a00dea2564f46a568b8681d8efccb4834cda

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/aarch64_efi: Linux needs host-openssl to build

The Linux kernel builds fails with:

scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
 #include <openssl/bio.h>

Because it needs host-openssl.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/131216892

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add entry for aarch64_efi_defconfig

Erico Nunes recently contributed this defconfig, we can safely assume
he is willing to maintain it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/bananapi_m2_ultra: add kernel headers version option

The bananapi_m2_plus defconfig uses a 4.18 kernel, but doesn't specify
anything for the kernel headers version, so the Buildroot default gets
used, which currently is 4.19. Since 4.19 is newer than 4.18,
Buildroot rightfully whines:

  Incorrect selection of kernel headers: expected 4.19.x, got 4.18.x

Let's fix this by telling this defconfig to use the headers from the
kernel, and that they are of version 4.18.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/131216938

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add entry for the bananapi_m2_ultra_defconfig

Lothar contributed this board not long ago, so let's assume he is
willing to take care of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing: drop docstring in TestPythonPackageBase::test_run()

Having a docstring in the test_run() method clutters the "run-tests
-l" output:

test_run (tests.package.test_python_crossbar.TestPythonPy3Crossbar)
Test a python package. ... ok
[...]
test_run (tests.package.test_python_pexpect.TestPythonPy2Pexpect)
Test a python package. ... ok
test_run (tests.package.test_python_pexpect.TestPythonPy3Pexpect)
Test a python package. ... ok
test_run (tests.package.test_python_twisted.TestPythonPy2Twisted)
Test a python package. ... ok
test_run (tests.package.test_python_twisted.TestPythonPy3Twisted)
Test a python package. ... ok
test_run (tests.package.test_python_pynacl.TestPythonPy2Pynacl)
Test a python package. ... ok
test_run (tests.package.test_python_pynacl.TestPythonPy3Pynacl)
Test a python package. ... ok

So let's simply drop this docstring that is not particularly useful.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/afboot-stm32: create destination directory during installation

Following d0f4f95e390bcb1c953efa125f5277a8a235396e ("Makefile: rework
main directory creation logic"), BINARIES_DIR is not implicitly
created by the main Makefile at the beginning of the build, leaving
that up to whatever piece of code needs to install something in
$(BINARIES_DIR).

The afboot-stm32 package didn't pay attention to this, which this
commit fixes.

While at it, we move the afboot-stm32 installation into
<pkg>_INSTALL_IMAGES_CMDS, because using <pkg>_INSTALL_TARGET_CMDS to
install only files to BINARIES_DIR is a bit strange.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/131217111

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: security bump to version 7.2.13

Fixes CVE-2018-19518: University of Washington IMAP Toolkit 2007f on UNIX,
as used in imap_open() in PHP and other products, launches an rsh command
(by means of the imap_rimap function in c-client/imap4r1.c and the tcp_aopen
function in osdep/unix/tcp_unix.c) without preventing argument injection,
which might allow remote attackers to execute arbitrary OS commands if the
IMAP server name is untrusted input (e.g., entered by a user of a web
application) and if rsh has been replaced by a program with different
argument semantics.  For example, if rsh is a link to ssh (as seen on Debian
and Ubuntu systems), then the attack can use an IMAP server name containing
a "-oProxyCommand" argument.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pcm-tools: new package

Processor Counter Monitor (PCM) is an application programming interface
(API) and a set of tools based on the API to monitor performance and
energy metrics of Intel(R) Core(TM), Xeon(R), Atom(TM) and Xeon Phi(TM)
processors.

This package contains a patch on the pmu-query.py script to look for the
pcm-core program at the default path. It's not nice to have a Buildroot
specific patch but let's use one while we look for a solution that is
acceptable upstream.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Peter: Needs C++, force X86_MSR on in linux]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

liboping: fix format-truncation error

liboping.c: In function 'ping_host_add':
liboping.c:207:9: error: '%s' directive output may be truncated writing
up to 255 bytes into a region of size 243 [-Werror=format-truncation=]
    "%s: %s", function, message);
         ^~
liboping.c:1644:40:
    ping_set_error (obj, "getaddrinfo", errmsg);
                                        ~~~~~~
liboping.c:206:2: note: 'snprintf' output between 14 and 269 bytes into
a destination of size 256
  snprintf (obj->errmsg, sizeof (obj->errmsg),
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "%s: %s", function, message);

Fixes:
 - http://autobuild.buildroot.org/results/b12d86388b495a96194e0bcbb5c19a4e35cbc53d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squashfs: do not force gzip support if lz4/xz/zstd is selected

The logic to ensure at least one compression backend is selected was not
updated when lz4, xz and zstd were introduced -  Fix that.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Peter: add comment as suggested by Peter Seiderer]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>