binutils-gdb.git
7 years agoRISC-V: Fix TLS copy relocs
Andrew Waterman [Wed, 28 Jun 2017 05:44:24 +0000 (22:44 -0700)]
RISC-V: Fix TLS copy relocs

The dynrelro introduction wasn't implemented quite right for RISC-V,
as it didn't consider TLS copy relocs.

bfd/ChangeLog

2017-06-29  Andrew Waterman  <andrew@sifive.com>

        * elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol): Fix TLS copy
        relocs.

7 years agoExpression completer should not match explicit location options
Pedro Alves [Thu, 29 Jun 2017 14:52:38 +0000 (15:52 +0100)]
Expression completer should not match explicit location options

This commit fixes a mismatch between what "print" command completer
thinks the command understands, and what the command actually
understands.

The explicit location options are understood by commands that take
(linespecs and) explicit locations as argument.  I.e, breakpoint
commands, and "list".  For example:

 (gdb) b -source file.c -function my_func

So for those commands, it makes sense that the completer
completes:

 "b -sour[TAB]" -> "b -source "
 "b -functi[TAB]" -> "b -function "

etc.

However, completion for commands that take expressions (not
linespecs/locations) as arguments, such as the "print" command, also
completes the explicit location options, even though those switches
aren't really understood by these commands.  Instead, "-foo" is
understood as an expression applying unary minus on a symbol named
"foo" (think "print -1"):

 (gdb) p -func[TAB]
 (gdb) p -function [RET]
 No symbol "function" in current context.

The patch fixes this by having the expression_completer function
bypass the function that completes explicit locations.

New regression tests included.

gdb/ChangeLog:
2017-06-29  Pedro Alves  <palves@redhat.com>

* completer.c (expression_completer): Call
linespec_location_completer instead of location_completer.

gdb/testsuite/ChangeLog:
2017-06-29  Pedro Alves  <palves@redhat.com>

* gdb.base/printcmds.exp: Add tests.

7 years agoRemove old stale expression_completer hack
Pedro Alves [Thu, 29 Jun 2017 14:52:37 +0000 (15:52 +0100)]
Remove old stale expression_completer hack

The code in question was introduced by:

 https://sourceware.com/ml/gdb-patches/2008-06/msg00143.html

"The fix is to make sure that the entire expression is passed to
expression_completer, then duplicate some logic there in the case
where location_completer is called."

The logic that was duplicated was much later on removed by the
original explicit locations patch:

 commit 87f0e7204722a986f79f245eee716f0870832d47
 Author:     Keith Seitz <keiths@redhat.com>
 AuthorDate: Tue Aug 11 17:09:36 2015 -0700
 Commit:     Keith Seitz <keiths@redhat.com>
 CommitDate: Tue Aug 11 17:09:36 2015 -0700

     Explicit locations: add UI features for CLI

 @@ -688,16 +880,6 @@ complete_line_internal (const char *text,
       rl_completer_word_break_characters =
 gdb_completer_file_name_break_characters;
     }
 -                 else if (c->completer == location_completer)
 -                   {
 -                     /* Commands which complete on locations want to
 -                        see the entire argument.  */
 -                     for (p = word;
 -                          p > tmp_command
 -                            && p[-1] != ' ' && p[-1] != '\t';
 -                          p--)
 -                       ;
 -                   }

However this case in expression_completer was left behind.

I couldn't come up with a test where this currently makes any
difference.

gdb/ChangeLog:
2017-06-29  Pedro Alves  <palves@redhat.com>

* completer.c (expression_completer): Remove code that recomputes
'text' from 'word'.

7 years ago[ARC] Use FOR_EACH_DISASSEMBLER_OPTION to iterate over options
Anton Kolesov [Mon, 19 Jun 2017 10:27:52 +0000 (13:27 +0300)]
[ARC] Use FOR_EACH_DISASSEMBLER_OPTION to iterate over options

This patch updates arc-dis.c:parse_disassembler_options to use a macro
FOR_EACH_DISASSEMBLER_OPTION, which has been introduced in [1], instead of a
homegrown solution to split option string.

[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=65b48a81

opcodes/ChangeLog:

yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

* arc-dis.c (parse_disassembler_options): Use
FOR_EACH_DISASSEMBLER_OPTION.

7 years ago[ARC] Fix handling of cpu=... disassembler option value
Anton Kolesov [Thu, 15 Jun 2017 12:58:32 +0000 (15:58 +0300)]
[ARC] Fix handling of cpu=... disassembler option value

There is a bug in handling of cpu=... disassembler option in case there are
other options after it, for example, `cpu=EM,dsp'.  In this case `EM,dsp' is
treated as an option value, and strcasecmp reports is as non-equal to "EM".
This is fixed by using disassembler_options_cmp function, which compares string
treating `,' the same way as `\0'.

This function also solves a problem with option order in parse_option.
Previously, if several option had same prefix (e.g. fpud, fpuda), then the
longer one should have been compared first, otherwise when longer option is
passed it would be treated as a short one, because

  CONST_STRNEQ ("fpud", "fpuda")

would be true.  The order of options was correct for ARC, so there were no
bugs per se, but with disassembler_option_cmp there is no risk of such a bug
being introduced in the future.

opcodes/ChangeLog:

yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

* arc-dis.c (parse_option): Use disassembler_options_cmp to compare
disassembler option strings.
(parse_cpu_option): Likewise.

binutils/ChangeLog

yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

* testsuite/binutils-all/arc/double_store.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Tests for disassembler
options.
(do_objfile): New function.
(check_assembly): Likewise.

7 years agoUse target_desc fields expedite_regs and xmltarget ifndef IN_PROCESS_AGENT
Yao Qi [Thu, 29 Jun 2017 11:41:50 +0000 (12:41 +0100)]
Use target_desc fields expedite_regs and xmltarget ifndef IN_PROCESS_AGENT

struct target_desc is used by both GDBserver and IPA, but fields
expedite_regs and xmltarget are only used in GDBserver, so this patch wraps
these two fields by ifndef IN_PROCESS_AGENT.  This patch also changes
regformats/regdat.sh to generate .c files in this way too.

gdb/gdbserver:

2017-06-29  Yao Qi  <yao.qi@linaro.org>

* tdesc.h (struct target_desc) [IN_PROCESS_AGENT] <expedite_regs>:
Remove.
[IN_PROCESS_AGENT] <xmltarget>: Likewise.

gdb:

2017-06-29  Yao Qi  <yao.qi@linaro.org>

* regformats/regdat.sh: Generate code with
"ifndef IN_PROCESS_AGENT".

7 years agobfd: prevent all but undef weak syms from becoming dynamic in sparc.
Egeyar Bagcioglu [Thu, 29 Jun 2017 11:28:27 +0000 (04:28 -0700)]
bfd: prevent all but undef weak syms from becoming dynamic in sparc.

Prevent sparc backend making symbols dynamic unless they are undefined
weak. Use R_SPARC_RELATIVE for the symbols which are not dynamic in PIC.

This patch is tested on sparc64-unknown-linux-gnu, no regressions are
found.

bfd/ChangeLog:

2017-06-29  Egeyar Bagcioglu  <egeyar.bagcioglu@oracle.com>

* elfxx-sparc.c (allocate_dynrelocs): Don't make a symbol dynamic
unless it is undefined weak.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Set the flag
relative_reloc to direct non-dynamic symbols to R_SPARC_RELATIVE
relocation.
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): If symbol
        is not dynamic in PIC, abort.

7 years ago[AArch64] Only override the symbol dynamic decision on undefined weak symbol
Jiong Wang [Thu, 29 Jun 2017 10:47:43 +0000 (11:47 +0100)]
[AArch64] Only override the symbol dynamic decision on undefined weak symbol

This fix is an adaption of the x86-64 PR ld/21402 fix to AArch64.

After the generic code deciding one symbol is not dynamic, AArch64 backend
only overrides the decision on undefined weak symbols.

bfd/
PR ld/21402
* elfnn-aarch64.c (elfNN_aarch64_allocate_dynrelocs): Only make
undefined weak symbols into dynamic.
(elfNN_aarch64_final_link_relocate): Generate runtime RELATIVE
relocation for non-dynamic symbols.
(elfNN_aarch64_finish_dynamic_symbol): Add sanity check.

7 years ago[AArch64] Remove duplicated code when handling some GOT relocations types
Jiong Wang [Thu, 29 Jun 2017 10:45:24 +0000 (11:45 +0100)]
[AArch64] Remove duplicated code when handling some GOT relocations types

There are quite a few duplicated code supporting several GP based
relocation types.  They are:

  BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
  BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
  BFD_RELOC_AARCH64_MOVW_GOTOFF_G1

These relocation types are supposed to be used for large memory model PIC/pic
mode under which we will have an initialized GP register points to the base of
GOT table, then these relocations are supposed to put the distance between GOT
entry and GOT table base address into the related instructions.

So, the parameters required to calculate the relocation should be the same as
BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15 etc, all of them are require the GOT entry
address and GOT table base address to perform the relocation.

This patch has removed those duplicated code when handling above listed
relocation types,  grouped them with others as relocation types that are
require GOT table base address during performing relocation, reused the
existed GOT handling code.

The relocation calculation for these types before and after this patch should be
identical.

bfd/
* elfnn-aarch64.c (aarch64_relocation_aginst_gp_p): New function.
(elfNN_aarch64_final_link_relocate): Delete duplicated code for
BFD_RELOC_AARCH64_LD64_GOTOFF_LO15, BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC,
BFD_RELOC_AARCH64_MOVW_GOTOFF_G1.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Optimize the
support for them.

7 years agoS390: Support guarded-storage core note sections
Andreas Arnez [Thu, 29 Jun 2017 08:30:09 +0000 (10:30 +0200)]
S390: Support guarded-storage core note sections

Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block".  This patch adds support for the respective core
notes sections to binutils.

bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.

binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.

include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.

7 years agoAutomatic date update in version.in
GDB Administrator [Thu, 29 Jun 2017 00:01:02 +0000 (00:01 +0000)]
Automatic date update in version.in

7 years agoDon't call bfd_get_file_size in _bfd_generic_get_section_contents
H.J. Lu [Wed, 28 Jun 2017 18:07:04 +0000 (11:07 -0700)]
Don't call bfd_get_file_size in _bfd_generic_get_section_contents

Since it is impossible to read beyond the end of normal files, we only
need to check archive element size in _bfd_generic_get_section_contents

* libbfd.c (_bfd_generic_get_section_contents): Don't call
bfd_get_file_size.  Check archive element size.
(_bfd_generic_get_section_contents_in_window): Likewise.

7 years agoChange bfd_get_size/bfd_get_file_size to ufile_ptr
H.J. Lu [Wed, 28 Jun 2017 18:00:13 +0000 (11:00 -0700)]
Change bfd_get_size/bfd_get_file_size to ufile_ptr

bfd_get_size and bfd_get_file_size should return the unsigned file
size.  Otherwise they return negative values for file >= 2GB with
32-bit ufile_ptr.

bfd/

* bfd-in2.h: Regenerated.
* bfdio.c (bfd_get_size): Change return type to ufile_ptr.
(bfd_get_file_size): Likewise.

binutils/

* objdump.c (dump_relocs_in_section): Cast to ufile_ptr when
comparing against bfd_get_file_size return.

7 years agogdb/command.h: Include common/scoped_restore.h
Pedro Alves [Wed, 28 Jun 2017 14:19:02 +0000 (15:19 +0100)]
gdb/command.h: Include common/scoped_restore.h

command.h depends on scoped_restore:

  extern scoped_restore_tmpl<int> prevent_dont_repeat (void);

But doesn't include the corresponding header
("common/scoped_restore.h").  We haven't noticed a problem because
utils.h includes scoped_restore.h, and defs.h includes utils.h.

However, a patch that makes "symtab.h" include "completer.h", exposed
the issue:
 https://sourceware.org/ml/gdb-patches/2017-06/msg00023.html.

Without this fix that would break building all .o files like this:

 In file included from src/gdb/completer.h:21:0,
                  from src/gdb/symtab.h:28,
                  from src/gdb/language.h:26,
                  from src/gdb/frame.h:72,
                  from src/gdb/gdbarch.h:39,
                  from src/gdb/defs.h:636,
                  from src/gdb/top.c:20:
 src/gdb/command.h:434:8: error: â€˜scoped_restore_tmpl’ does not name a type
  extern scoped_restore_tmpl<int> prevent_dont_repeat (void);
         ^
 Makefile:1911: recipe for target 'top.o' failed

because defs.h includes gdbarch.h before it includes utils.h.

gdb/ChangeLog:
2017-06-28  Pedro Alves  <palves@redhat.com>

* command.h: Include "common/scoped_restore.h".

7 years agoUse obstack_grow_str
Yao Qi [Wed, 28 Jun 2017 13:48:55 +0000 (14:48 +0100)]
Use obstack_grow_str

We already have macro obstack_grow_str, which is helpful to shorten the
code.

gdb:

2017-06-28  Yao Qi  <yao.qi@linaro.org>

* mi/mi-cmd-break.c (mi_argv_to_format): Use obstack_grow_str
instead of obstack_grow.

7 years agoAdd support for version 2 of the GNU Build Attribute note specification.
Nick Clifton [Wed, 28 Jun 2017 13:52:12 +0000 (14:52 +0100)]
Add support for version 2 of the GNU Build Attribute note specification.

* objcopy.c (merge_gnu_build_notes): Add support for version 2 notes.
* readelf.c (print_gnu_build_attribute_name): Likewise.

7 years ago[AArch64] Add dot product support for AArch64 to binutils
Tamar Christina [Wed, 28 Jun 2017 10:09:01 +0000 (11:09 +0100)]
[AArch64] Add dot product support for AArch64 to binutils

gas/
* config/tc-aarch64.c (aarch64_reg_parse_32_64): Accept 4B.
(aarch64_features): Added dotprod.
* doc/c-aarch64.texi: Added dotprod.
* testsuite/gas/aarch64/dotproduct.d: New.
* testsuite/gas/aarch64/dotproduct.s: New.

opcodes/
* aarch64-asm.c (aarch64_ins_reglane): Added 4B dotprod.
* aarch64-dis.c (aarch64_ext_reglane): Likewise.
* aarch64-tbl.h (QL_V3DOT, QL_V2DOT): New.
(aarch64_feature_dotprod, DOT_INSN): New.
(udot, sdot): New.
* aarch64-dis-2.c: Regenerated.

include/
* opcode/aarch64.h: (AARCH64_FEATURE_DOTPROD): New.
(aarch64_insn_class): Added dotprod.

7 years ago[ARM] Assembler and disassembler support Dot Product Extension
Jiong Wang [Wed, 28 Jun 2017 10:00:55 +0000 (11:00 +0100)]
[ARM] Assembler and disassembler support Dot Product Extension

  This patch add assembler and disassembler support for new Dot Product
  Extension.

  The support can be enabled through the new "+dotprod" extension.

include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.

gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.

opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.

7 years agoFix PR 21337: segfault when re-reading symbols.
Doug Gilmore [Wed, 28 Jun 2017 01:54:22 +0000 (02:54 +0100)]
Fix PR 21337: segfault when re-reading symbols.

Fix issue exposed by commit 3e29f34.

The basic issue is that section data referenced through an objfile
pointer can also be referenced via the program-space data pointer,
although via a separate mapping mechanism, which is set up by
update_section_map.  Thus once section data attached to an objfile
pointer is released, the section map associated with the program-space
data pointer must be marked dirty to ensure that update_section_map is
called to prevent stale data being referenced.  For the matter at hand
this marking is being done via a call to objfiles_changed.

Before commit 3e29f34 objfiles_changed could be called after all of
the objfile pointers were processed in reread_symbols since section
data references via the program-space data pointer would not occur in
the calls of read_symbols performed by reread_symbols.

With commit 3e29f34 MIPS target specific calls to find_pc_section were
added to the code for DWARF information processing, which is called
via read_symbols.  Thus in reread_symbols the call to objfiles_changed
needs to be called before calling read_symbols, otherwise stale
section data can be referenced.

Thanks to Luis Machado for providing text for the main comment
associated with the change.

gdb/
2017-06-28  Doug Gilmore  <Doug.Gilmore@imgtec.com>
    PR gdb/21337
    * symfile.c (reread_symbols): Call objfiles_changed just before
    read_symbols.

gdb/testsuite/
2017-06-28  Doug Gilmore  <Doug.Gilmore@imgtec.com>
    PR gdb/21337
    * gdb.base/reread-readsym.exp: New file.
    * gdb.base/reread-readsym.c: New file.

7 years agoMIPS: Add new Imagination interAptiv MR2 GAS and LD tests
Maciej W. Rozycki [Wed, 28 Jun 2017 01:07:36 +0000 (02:07 +0100)]
MIPS: Add new Imagination interAptiv MR2 GAS and LD tests

Add GAS tests to verify Imagination interAptiv MR2 instruction assembly,
disassembly and ELF object file flags.

Add LD tests to verify Imagination interAptiv MR2 ELF object file
link-time compatibility and flag merging/propagation.  Use the framework
enhancement added with commit 7575e6a752ec ("MIPS/LD/testsuite:
mips-elf-flags: Add MIPS ABI Flags handling").

gas/
* testsuite/gas/mips/elf_mach_interaptiv-mr2.d: New test.
* testsuite/gas/mips/save-err.d: New test.
* testsuite/gas/mips/save-sub.d: New test.
* testsuite/gas/mips/interaptiv-mr2@save.d: New test.
* testsuite/gas/mips/mips1@save-sub.d: New test.
* testsuite/gas/mips/mips2@save-sub.d: New test.
* testsuite/gas/mips/mips3@save-sub.d: New test.
* testsuite/gas/mips/mips4@save-sub.d: New test.
* testsuite/gas/mips/mips5@save-sub.d: New test.
* testsuite/gas/mips/mips32@save-sub.d: New test.
* testsuite/gas/mips/mips64@save-sub.d: New test.
* testsuite/gas/mips/mips16@save-sub.d: New test.
* testsuite/gas/mips/mips16e@save-sub.d: New test.
* testsuite/gas/mips/r3000@save-sub.d: New test.
* testsuite/gas/mips/r3900@save-sub.d: New test.
* testsuite/gas/mips/r4000@save-sub.d: New test.
* testsuite/gas/mips/vr5400@save-sub.d: New test.
* testsuite/gas/mips/interaptiv-mr2@save-sub.d: New test.
* testsuite/gas/mips/sb1@save-sub.d: New test.
* testsuite/gas/mips/octeon2@save-sub.d: New test.
* testsuite/gas/mips/octeon3@save-sub.d: New test.
* testsuite/gas/mips/xlr@save-sub.d: New test.
* testsuite/gas/mips/r5900@save-sub.d: New test.
* testsuite/gas/mips/mips16e2-copy.d: New test.
* testsuite/gas/mips/mips16e2-copy-err.d: New test.
* testsuite/gas/mips/save.d: Remove `MIPS16e' from the `name'
option.  Adjust for trailing padding change.
* testsuite/gas/mips/mips16e2-copy-err.l: New stderr output.
* testsuite/gas/mips/save-sub.s: New test source.
* testsuite/gas/mips/mips16e2-copy.s: New test source.
* testsuite/gas/mips/mips16e2-copy-err.s: New test source.
* testsuite/gas/mips/save.s: Update description, change trailing
padding and remove trailing white space.
* testsuite/gas/mips/mips.exp: Expand `save' and `save-err'
tests across the regular MIPS interAptiv MR2 architecture.  Run
the new tests.

ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp: Add interAptiv MR2
tests.

7 years agoMIPS: Add Imagination interAptiv MR2 GAS test infrastructure
Maciej W. Rozycki [Wed, 28 Jun 2017 01:07:36 +0000 (02:07 +0100)]
MIPS: Add Imagination interAptiv MR2 GAS test infrastructure

Define a new regular MIPS and MIPS16 interAptiv MR2 test architecture
and adjust existing tests now run against these architectures
accordingly.

This change causes new test failures:

FAIL: MIPS jal-svr4pic (interaptiv-mr2)
FAIL: MIPS jal-svr4pic noreorder (interaptiv-mr2)

with the `mips-sgi-irix5' and `mips-sgi-irix6' targets, which are
consistent with the remaining architecture results for these cases, that
do not take into account the lack of R_MIPS_JALR relocations produced by
GAS for these targets.  As a preexisting issue these failures are not
addressed with this change.

gas/
* testsuite/gas/mips/mips.exp (interaptiv-mr2): New architecture.
(mips16e2-interaptiv-mr2): Likewise.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro.d: New
test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-t.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-e.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-t.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-e.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64.d: New
test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-sub.d: New
test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-sub.d: New
test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64-sub.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e2-mt-sub.d:
New test.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-asmacro.d:
New test.
* testsuite/gas/mips/interaptiv-mr2@mcu.d: New test.
* testsuite/gas/mips/interaptiv-mr2@isa-override-1.d: New test.
* testsuite/gas/mips/interaptiv-mr2@isa-override-2.d: New test.
* testsuite/gas/mips/attr-gnu-4-5.d: Ignore any number of ASE
flag lines present rather than just one.
* testsuite/gas/mips/attr-gnu-4-6.d: Likewise.
* testsuite/gas/mips/attr-gnu-4-7.d: Likewise.
* testsuite/gas/mips/attr-none-o32-fp64-nooddspreg.d: Likewise.
* testsuite/gas/mips/attr-none-o32-fp64.d: Likewise.
* testsuite/gas/mips/attr-none-o32-fpxx.d: Likewise.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro.l: New
stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-t.l:
New stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-macro-e.l:
New stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-t.l:
New stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-insn-e.l:
New stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16-sub.l: New
stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-sub.l: New
stderr output.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e-64-sub.l:
New stderr output.
* testsuite/gas/mips/interaptiv-mr2@isa-override-1.l: New stderr
output.
* testsuite/gas/mips/interaptiv-mr2@isa-override-2.l: New stderr
output.

7 years agoMIPS: Add Imagination interAptiv MR2 MIPS32r3 processor support
Maciej W. Rozycki [Wed, 28 Jun 2017 01:07:36 +0000 (02:07 +0100)]
MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor support

Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:

1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
   MIPS16e2 instructions[1], for assembly and disassembly,

2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
   regular MIPS instructions[2], for assembly and disassembly,

3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
   extension.

4. Support for interAptiv MR2 architecture selection for assembly, in
   the form of the `-march=interaptiv-mr2' command-line option and its
   corresponding `arch=interaptiv-mr2' setting for the `.set' and
   `.module' pseudo-ops.

5. Support for interAptiv MR2 architecture selection for disassembly,
   in the form of the `mips:interaptiv-mr2' target architecture, for
   use e.g. with the `-m' command-line option for `objdump'.

Parts of this change by Matthew Fortune and Andrew Bennett.

References:

[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
    Imagination Technologies Ltd., Document Number: MD00904, Revision
    02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
    Instructions", pp. 878-883

[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917

include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.

bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.

opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.

binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.

gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.

* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.

7 years agoAutomatic date update in version.in
GDB Administrator [Wed, 28 Jun 2017 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agocompletion_list_add_name wrapper functions
Pedro Alves [Tue, 27 Jun 2017 15:32:57 +0000 (16:32 +0100)]
completion_list_add_name wrapper functions

Replace macros with functions.

gdb/ChangeLog:
2017-06-27  Pedro Alves  <palves@redhat.com>

* symtab.c (COMPLETION_LIST_ADD_SYMBOL)
(MCOMPLETION_LIST_ADD_SYMBOL): Delete macros, replace with ...
(completion_list_add_symbol, completion_list_add_msymbol):
... these new functions.
(add_symtab_completions)
(default_make_symbol_completion_list_break_on_1): Adjust.

7 years agoobjfile_per_bfd_storage non-POD
Pedro Alves [Tue, 27 Jun 2017 15:22:08 +0000 (16:22 +0100)]
objfile_per_bfd_storage non-POD

A following patch will want to add a std::vector to
objfile_per_bfd_storage.  That makes it non-trivially
constructible/destructible.  Since objfile_per_bfd_storage objects are
allocated on an obstack, we need to call their ctors/dtors manually.
This is what this patch does.  And then since we can now rely on
ctors/dtors being run, make objfile_per_bfd_storage::storage_obstack
be an auto_obstack.

gdb/ChangeLog:
2017-06-27  Pedro Alves  <palves@redhat.com>

* objfiles.c (get_objfile_bfd_data): Call bfd_alloc instead of
bfd_zalloc.  Call objfile_per_bfd_storage's ctor.
(free_objfile_per_bfd_storage): Call objfile_per_bfd_storage's
dtor.
* objfiles.h (objfile_per_bfd_storage): Add ctor.  Make
'storage_obstack' field an auto_obstack.  In-class initialize all
non-bitfield fields.  Make minsyms_read bool.
* symfile.c (read_symbols): Adjust.

7 years agoRemove MAX_REGISTER_SIZE from remote-sim.c
Alan Hayward [Tue, 27 Jun 2017 12:10:16 +0000 (13:10 +0100)]
Remove MAX_REGISTER_SIZE from remote-sim.c

gdb/
* remote-sim.c (gdbsim_fetch_register): Use byte_vector.
(gdbsim_store_register): Likewise.

7 years agoRemove debugging accidentally left in tekhex.c.
Nick Clifton [Tue, 27 Jun 2017 11:11:22 +0000 (12:11 +0100)]
Remove debugging accidentally left in tekhex.c.

* tekhex.c (pass_over): Revert accidental conversion of a local
array to a static array.

7 years agoEliminate make_cleanup_obstack_free, introduce auto_obstack
Pedro Alves [Tue, 27 Jun 2017 10:07:14 +0000 (11:07 +0100)]
Eliminate make_cleanup_obstack_free, introduce auto_obstack

This commit eliminates make_cleanup_obstack_free, replacing it with a
new auto_obstack type that inherits obstack to add cdtors.

These changes in the parsers may not be obvious:

 -  obstack_init (&name_obstack);
 -  make_cleanup_obstack_free (&name_obstack);
 +  name_obstack.clear ();

Here, the 'name_obstack' variable is a global.  The change means that
the obstack's contents from a previous parse will stay around until
the next parsing starts.  I.e., memory won't be reclaimed until then.
I don't think that's a problem, these objects don't really grow much
at all.

The other option I tried was to add a separate type that is like
auto_obstack but manages an external obstack, just for those cases.  I
like the current approach better as that other approach adds more
boilerplate and yet another type to learn.

gdb/ChangeLog:
2017-06-27  Pedro Alves  <palves@redhat.com>

* c-exp.y (name_obstack): Now an auto_obstack.
(yylex): Use auto_obstack::clear.
(c_parse): Use auto_obstack::clear instead of reinitializing and
freeing the obstack.
* c-lang.c (evaluate_subexp_c): Use auto_obstack.
* d-exp.y (name_obstack): Now an auto_obstack.
(yylex): Use auto_obstack::clear.
(d_parse): Use auto_obstack::clear instead of reinitializing and
freeing the obstack.
* dwarf2loc.c (fetch_const_value_from_synthetic_pointer): Use
auto_obstack.
* dwarf2read.c (create_addrmap_from_index)
(dwarf2_build_psymtabs_hard)
(update_enumeration_type_from_children): Likewise.
* gdb_obstack.h (auto_obstack): New type.
* go-exp.y (name_obstack): Now an auto_obstack.
(build_packaged_name): Use auto_obstack::clear.
(go_parse): Use auto_obstack::clear instead of reinitializing and
freeing the obstack.
* linux-tdep.c (linux_make_mappings_corefile_notes): Use
auto_obstack.
* printcmd.c (printf_wide_c_string, ui_printf): Use auto_obstack.
* rust-exp.y (work_obstack): Now an auto_obstack.
(rust_parse, rust_lex_tests): Use auto_obstack::clear instead of
reinitializing and freeing the obstack.
* utils.c (do_obstack_free, make_cleanup_obstack_free): Delete.
(host_char_to_target): Use auto_obstack.
* utils.h (make_cleanup_obstack_free): Delete declaration.
* valprint.c (generic_emit_char, generic_printstr): Use
auto_obstack.

7 years agoFix PR 13402
Senthil Kumar Selvaraj [Tue, 27 Jun 2017 09:16:08 +0000 (14:46 +0530)]
Fix PR 13402

Fix incorrect adjustment of diff relocs when relaxing, and thus the
resulting source line to address mismatch.

Fix two issues when adjusting diff relocs to account for
deleted bytes.

1. Don't adjust the difference if the end address is the shrinked
insn's address i.e. use < instead of <=. The relaxation code deletes
count bytes from or after shrinked_insn_address, so the difference
between start_address and end_address should remain unchanged in this
case.

2. Adjust the reloc addend if the difference is to be adjusted and
symval + reloc addend is past the shrinked insn address. This is
because for a typical sym1 - sym2 diff reloc, sym1 is .text +
irel->r_addend, and the addend should be reduced to account for the
shrinked insn.

For example, assume the reloc value is .text + 0x8 with .text = 0, the
diff value in the object file = 0x4, and shrinked_insn_address = 0x4
with count = 0x2. Then the existing code writes 0x2 into the object
file to account for the deleted bytes, as shrinked_insn_address lies
between 0x8 and 0x8 - 0x4 = 0x4, but leaves the addend as is. The next
time the reloc is looked at, the code sees if a shrinked_insn_address
lies between 0x8 and 0x8 - 0x2 = 0x6, instead of 0x6 and 0x4. If there
happens to be one, then the diff value in the object file ends up
getting reduced again.

bfd/

2017-06-27  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

PR ld/13402
* elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Adjust
reloc addend if necessary. Adjust diff only if
shrinked_insn_address < end_address.

ld/

2017-06-27  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

PR ld/13402
* testsuite/ld-avr/pr13402.d: New test.
* testsuite/ld-avr/pr13402.s: New test.

7 years agodarwin: Do not add a dummy thread
Simon Marchi [Tue, 27 Jun 2017 08:55:36 +0000 (10:55 +0200)]
darwin: Do not add a dummy thread

Starting a process on macOS/Darwin currently leads to this error:

/Users/simark/src/binutils-gdb/gdb/darwin-nat.c:383: internal-error: void darwin_check_new_threads(struct inferior *): Assertion `tp' failed.

with the corresponding partial backtrace (sorry, taken with lldb,
because well, gdb is broken :)):

    frame #9: 0x000000010004605a gdb`darwin_check_new_threads(inf=0x0000000100edf670) at darwin-nat.c:383
    frame #10: 0x0000000100045848 gdb`darwin_init_thread_list(inf=0x0000000100edf670) at darwin-nat.c:1710
    frame #11: 0x00000001000452f8 gdb`darwin_ptrace_him(pid=8375) at darwin-nat.c:1792
    frame #12: 0x0000000100041d95 gdb`fork_inferior(...) at fork-inferior.c:440
    frame #13: 0x0000000100043f82 gdb`darwin_create_inferior(...) at darwin-nat.c:1841
    frame #14: 0x000000010034ac32 gdb`run_command_1(args=0x0000000000000000, from_tty=1, tbreak_at_main=1) at infcmd.c:611

The issue was introduced by commit

  "Share fork_inferior et al with gdbserver"

because it changed the place where the dummy thread (pid, 0, 0) is added,
relative to the call to the init_trace_fun callback.  In this callback, darwin
checks for new threads in the program (there should be exactly one) in order to
update this dummy thread with the right tid.  Previously, things happened in
this order:

 - fork_inferior calls fork()
 - fork_inferior adds dummy thread
 - fork_inferior calls init_trace_fun callback, which updates the dummy
   thread info

Following the commit mentioned above, the new thread is added in the
darwin-nat code, after having called fork_inferior (in
darwin_create_inferior).  So gdb tries to do things in this order:

 - fork_inferior calls fork()
 - fork_inferior calls init_trace_fun callback, which tries to update
   the dummy thread info
 - darwin_create_inferior adds the dummy thread

The error happens while trying to update the dummy thread that has not
been added yet.

I don't think this dummy thread is necessary for darwin.  Previously, it
was fork_inferior that was adding this thread, for all targets, so
darwin had to deal with it.  Now that it's done by targets themselves,
we can just skip that on darwin.  darwin_check_new_threads called
indirectly by init_trace_fun/darwin_ptrace_him will simply notice the
new thread and add it with the right information.

My level of testing was: try to start a process and try to attach to a
process, and it seems to work somewhat like it did before.  I tried to
run the testsuite, but it leaves a huge amount of zombie processes that
launchd doesn't seem to reap, leading to exhaustion of system resources
(number of processes).

gdb/ChangeLog:

* darwin-nat.c (darwin_check_new_threads): Don't handle dummy
thread.
(darwin_init_thread_list): Don't update dummy thread.
(darwin_create_inferior, darwin_attach): Don't add a dummy thread.

7 years agoWarning fix
Alan Modra [Tue, 27 Jun 2017 05:13:49 +0000 (14:43 +0930)]
Warning fix

PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Warning fix.
(_bfd_generic_get_section_contents_in_window): Likewise.

7 years agoMIPS/GAS/testsuite: Drop the `mips16e-' prefix from SAVE/RESTORE tests
Maciej W. Rozycki [Tue, 27 Jun 2017 03:23:54 +0000 (04:23 +0100)]
MIPS/GAS/testsuite: Drop the `mips16e-' prefix from SAVE/RESTORE tests

In preparation to running these tests against regular MIPS instructions.

gas/
* testsuite/gas/mips/mips16e-save.d: Rename to...
* testsuite/gas/mips/save.d: ... this.
* testsuite/gas/mips/mips16e-save-err.d: Update the
`error-output' option and rename to...
* testsuite/gas/mips/save-err.d: ... this.
* testsuite/gas/mips/mips16e-save-err.l: Rename to...
* testsuite/gas/mips/save-err.l: ... this.
* testsuite/gas/mips/mips16e-save.s: Rename to...
* testsuite/gas/mips/save.s: ... this.
* testsuite/gas/mips/mips16e-save-err.s: Rename to...
* testsuite/gas/mips/save-err.s: ... this.
* testsuite/gas/mips/mips.exp: Rename `mips16e-save' and
`mips16e-save-err' invocations to `save' and `save-err'
respectively and reorder these tests away from MIPS16 tests.

7 years agoMIPS/GAS/testsuite: Run SAVE/RESTORE tests across all MIPS16e architectures
Maciej W. Rozycki [Tue, 27 Jun 2017 03:23:54 +0000 (04:23 +0100)]
MIPS/GAS/testsuite: Run SAVE/RESTORE tests across all MIPS16e architectures

gas/
* testsuite/gas/mips/mips16e-save.d: Remove `-mmips:isa32
-mmips:16' from `objdump' flags and `-march=mips32 -mips16' from
`as' flags.
* testsuite/gas/mips/mips16e-save-err.d: Remove `-march=mips32'
from `as' flags.
* testsuite/gas/mips/mips16e-save.s: Remove the `.set mips16'
pseudo-op.
* testsuite/gas/mips/mips16e-save-err.s: Likewise.
* testsuite/gas/mips/mips.exp: Run SAVE/RESTORE tests across all
MIPS16e architectures.

7 years agoMIPS/GAS/testsuite: Convert `mips16e-save-err' list test to a dump test
Maciej W. Rozycki [Tue, 27 Jun 2017 03:23:54 +0000 (04:23 +0100)]
MIPS/GAS/testsuite: Convert `mips16e-save-err' list test to a dump test

gas/
* testsuite/gas/mips/mips16e-save-err.d: New test.
* gas/testsuite/gas/mips/mips.exp: Fold `mips16e-save-err' list
test into the new test.

7 years agoMIPS/GAS/testsuite: Capitalize the name of the `mips16e-save' test
Maciej W. Rozycki [Tue, 27 Jun 2017 03:23:53 +0000 (04:23 +0100)]
MIPS/GAS/testsuite: Capitalize the name of the `mips16e-save' test

For consistency with the subsequent changes in this area.

gas/
* testsuite/gas/mips/mips16e-save.d: Capitalize the `name'
option.

7 years agoMIPS/LD/testsuite: mips-elf-flags: Add MIPS ABI Flags handling
Maciej W. Rozycki [Tue, 27 Jun 2017 01:58:27 +0000 (02:58 +0100)]
MIPS/LD/testsuite: mips-elf-flags: Add MIPS ABI Flags handling

Complement commit 351cdf24d223 ("[MIPS] Implement O32 FPXX, FP64 and
FP64A ABI extensions") and add optional MIPS ABI Flags handling to
`good_combination' in the `mips-elf-flags.exp' test script.  This lets
callers of this procedure request to examine MIPS ABI Flags in addition
to the `e_flags' member of the ELF file header so as to verify that
flags are merged correctly by LD.  The presence of further arguments
triggers this verification, in which case `readelf' is called with the
`-A' option additionally specified and the ISA member, the ISA Extension
member and the ASEs member will be examined as per the arguments.

Unlike with `readelf -h' output consider a failure to retrieve the
member requested a test case failure rather than an unresolved result.
This is because unlike with the `e_flags' member of the ELF file header
which is always there in any valid ELF file the MIPS ABI Flags structure
is optional in LD output and the absence of this structure when expected
is surely a bug in LD.

ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp (good_combination):
Add an `args' final argument and examination code for `readelf
-A' output.  Update procedure description accordingly.

7 years agoMIPS/LD/testsuite: mips-elf-flags: Use `remote_exec' to call `readelf'
Maciej W. Rozycki [Tue, 27 Jun 2017 01:58:27 +0000 (02:58 +0100)]
MIPS/LD/testsuite: mips-elf-flags: Use `remote_exec' to call `readelf'

For ELF file header flag verification done in `good_combination' in the
`mips-elf-flags.exp' test script the version of `readelf' built along
with the rest of binutils has to be used rather than any such executable
already present on the build system, so that flags recognized by the
tool match those supported by LD being tested.  Use `remote_exec' as
elsewhere in the LD test framework and also with GAS and LD used here,
getting and arranging for extra reporting of `readelf' calls included in
test logs on this occasion as well.

ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp (good_combination):
Use `remote_exec' to call `readelf'.  Log the command issued.

7 years agoMIPS/LD/testsuite: mips-elf-flags: Use `-h' only with `readelf'
Maciej W. Rozycki [Tue, 27 Jun 2017 01:58:27 +0000 (02:58 +0100)]
MIPS/LD/testsuite: mips-elf-flags: Use `-h' only with `readelf'

For the purpose of link-time object compatibility handling verification
code in the `good_combination' procedure from the `mips-elf-flags.exp'
test script only examines the `e_flags' member of the ELF file header
and ignores data from any ELF program or section headers present.  Use
`readelf -h' rather than `readelf --headers' then to obtain data for
examination, avoiding unnecessary processing to extract this extraneous
information.

ld/
* testsuite/ld-mips-elf/mips-elf-flags.exp (good_combination):
Use `readelf -h' rather than `readelf --headers'.

7 years agoRISC-V: Use pc-relative relocation for FDE initial location
Kuan-Lin Chen [Thu, 8 Jun 2017 18:54:14 +0000 (11:54 -0700)]
RISC-V: Use pc-relative relocation for FDE initial location

The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.

bfd/ChangeLog
2017-06-26  Kuan-Lin Chen  <rufus@andestech.com>

* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.

gas/ChangeLog
2017-06-26  Kuan-Lin Chen  <rufus@andestech.com>

* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.

include/ChangeLog
2017-06-26  Kuan-Lin Chen  <rufus@andestech.com>

* elf/riscv.h (R_RISCV_32_PCREL): New.

7 years agoMore fixes for bfd_get_section_contents change
Alan Modra [Tue, 27 Jun 2017 00:15:04 +0000 (09:45 +0930)]
More fixes for bfd_get_section_contents change

PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Delete abort.
Use unsigned file pointer type, and remove cast.
* libbfd.c (_bfd_generic_get_section_contents_in_window): Likewise.
Add "count", not "sz".

7 years agoAutomatic date update in version.in
GDB Administrator [Tue, 27 Jun 2017 00:01:02 +0000 (00:01 +0000)]
Automatic date update in version.in

7 years agoFix GDB regressions caused by previous bfd_get_section_contents changes
Pedro Alves [Mon, 26 Jun 2017 23:21:25 +0000 (00:21 +0100)]
Fix GDB regressions caused by previous bfd_get_section_contents changes

Ref: https://sourceware.org/ml/binutils/2017-06/msg00343.html

bfd/ChangeLog:
2017-06-26  Pedro Alves  <palves@redhat.com>

PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents): Add "count", not
"sz".

7 years agoAdd a missing line to _bfd_generic_get_section_contents_in_window
H.J. Lu [Mon, 26 Jun 2017 22:47:16 +0000 (15:47 -0700)]
Add a missing line to _bfd_generic_get_section_contents_in_window

PR binutils/21665
* libbfd.c (_bfd_generic_get_section_contents_in_window): Add
a missing line.

7 years agoMIPS/BFD: Consistently mark the LSI CW4010 as a MIPS II processor
Maciej W. Rozycki [Mon, 26 Jun 2017 18:20:50 +0000 (19:20 +0100)]
MIPS/BFD: Consistently mark the LSI CW4010 as a MIPS II processor

Make BFD agree with GAS and mark the LSI MiniRISC CW4010 processor core
(for an odd reason referred to as LSI R4010 across our code base) as a
MIPS II processor in BFD as well, fixing a bug that has been there since
forever and addressing linker warnings like:

$ as -m4010 empty.s -o 4010.o
$ ld -r 4010.o -o 4010-r.o
ld: 4010.o: warning: Inconsistent ISA between e_flags and .MIPS.abiflags
$

due to the ISA level being recorded as MIPS III in ELF file header's
`e_flags' vs MIPS II in the MIPS ABI Flags section:

$ readelf -Ah 4010.o
ELF Header:
  Magic:   7f 45 4c 46 01 02 01 00 00 00 00 00 00 00 00 00
  Class:                             ELF32
  Data:                              2's complement, big endian
  Version:                           1 (current)
  OS/ABI:                            UNIX - System V
  ABI Version:                       0
  Type:                              REL (Relocatable file)
  Machine:                           MIPS R3000
  Version:                           0x1
  Entry point address:               0x0
  Start of program headers:          0 (bytes into file)
  Start of section headers:          348 (bytes into file)
  Flags:                             0x20821000, 4010, o32, mips3
  Size of this header:               52 (bytes)
  Size of program headers:           0 (bytes)
  Number of program headers:         0
  Size of section headers:           40 (bytes)
  Number of section headers:         11
  Section header string table index: 10
Attribute Section: gnu
File Attributes
  Tag_GNU_MIPS_ABI_FP: Hard float (double precision)

MIPS ABI Flags Version: 0

ISA: MIPS2
GPR size: 32
CPR1 size: 32
CPR2 size: 0
FP ABI: Hard float (double precision)
ISA Extension: LSI R4010
ASEs:
None
FLAGS 1: 00000000
FLAGS 2: 00000000
$

Available documentation[1][2] clearly indicates the LSI CW4010 processor
is only backwards compatible with the MIPS R4000 processor as far as the
latter's 32-bit instructions are concerned and consequently can only be
considered a MIPS II ISA implementation (with vendor extensions).

This fixes an LD testsuite failure:

FAIL: MIPS incompatible objects:  "-march=r4010 -32"      "-march=r4650 -32"

triggered for the `mips-sgi-irix5' and `mips-sgi-irix6' targets.

References:

[1] Paul Cobb, Bob Caulk, Joe Cesana, "The MiniRISC CW4010: A
    Superscalar MIPS Processor ASIC Core", LSI Logic, July 1995,
    presented at Hot Chips VII, Stanford University, Stanford,
    California, August 1995

[2] "MiniRISC MR4010 Superscalar Microprocessor Reference Device", LSI
    Logic, November 1996, Doc. No. DB09-000028-00, Order No. C15017

bfd/
* cpu-mips.c (arch_info_struct): Mark the 4010 32-bit.
* elfxx-mips.c (mips_set_isa_flags) <bfd_mach_mips4010>: Set
E_MIPS_ARCH_2 rather than E_MIPS_ARCH_3 in `e_flags'.
(mips_mach_extensions): Mark `bfd_mach_mips4010' as extending
`bfd_mach_mips6000' rather than `bfd_mach_mips4000'.

ld/
* testsuite/ld-mips-elf/lsi-4010-isa.d: New test.
* ld/testsuite/ld-mips-elf/mips-elf.exp: Run the new test.

7 years agoCheck file size before getting section contents
H.J. Lu [Mon, 26 Jun 2017 16:24:49 +0000 (09:24 -0700)]
Check file size before getting section contents

Don't check the section size in bfd_get_full_section_contents since
the size of a decompressed section may be larger than the file size.
Instead, check file size in _bfd_generic_get_section_contents.

PR binutils/21665
* compress.c (bfd_get_full_section_contents): Don't check the
file size here.
* libbfd.c (_bfd_generic_get_section_contents): Check for and
reject a section whoes size + offset is greater than the size
of the entire file.
(_bfd_generic_get_section_contents_in_window): Likewise.

7 years agoLD: Fix .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIX
Maciej W. Rozycki [Mon, 26 Jun 2017 15:08:55 +0000 (16:08 +0100)]
LD: Fix .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIX

Correct .startof.SECNAME/.sizeof.SECNAME tests for MIPS/IRIX targets,
complementing commit dc74becf498f ("ld: Add tests for -Ur") and commit
da614360f520 ("ld: Add tests for .startof.SECNAME/.sizeof.SECNAME") with
subsequent updates, and in reference to commit cbd0eecf261c ("Always
define referenced __start_SECNAME/__stop_SECNAME") and commit
7dba9362c172 ("Rewrite __start and __stop symbol handling").

These targets set the STT_OBJECT type for non-function symbol
references, according to `elf_frob_symbol' code in gas/config/obj-elf.c:

  /* The Irix 5 and 6 assemblers set the type of any common symbol and
     any undefined non-function symbol to STT_OBJECT.  We try to be
     compatible, since newer Irix 5 and 6 linkers care.  However, we
     only set undefined symbols to be STT_OBJECT if we are on Irix,
     because that is the only time gcc will generate the necessary
     .global directives to mark functions.  */

  if (S_IS_COMMON (symp))
    symbol_get_bfdsym (symp)->flags |= BSF_OBJECT;

  if (strstr (TARGET_OS, "irix") != NULL
      && ! S_IS_DEFINED (symp)
      && (symbol_get_bfdsym (symp)->flags & BSF_FUNCTION) == 0)
    symbol_get_bfdsym (symp)->flags |= BSF_OBJECT;

and consequently entries in the symbol table listing from `readelf'
produced with these tests do not match the NOTYPE pattern expected,
causing test suite failures:

FAIL: ld-elf/sizeofa
FAIL: ld-elf/sizeofc
FAIL: ld-elf/startofa
FAIL: ld-elf/startofc

specifically with the `mips-sgi-irix5' and `mips-sgi-irix6' targets.

Given that it does not matter for the feature covered by these tests
whether the type of the symbols produced is STT_NOTYPE or STT_OBJECT
adjust the problematic cases to accept either type, removing the
failures observed.

ld/
* testsuite/ld-elf/sizeofa.d: Also accept the OBJECT type for
the symbols examined.
* testsuite/ld-elf/sizeofc.d: Likewise.
* testsuite/ld-elf/startofa.d: Likewise.
* testsuite/ld-elf/startofc.d: Likewise.

7 years agorecord-full: Remove unused function netorder16
Simon Marchi [Mon, 26 Jun 2017 13:08:36 +0000 (15:08 +0200)]
record-full: Remove unused function netorder16

clang shows this warning:

  /home/emaisin/src/binutils-gdb/gdb/record-full.c:2344:1: error: unused function 'netorder16' [-Werror,-Wunused-function]
  netorder16 (uint16_t input)
  ^

Remove this function, which, AFAIK, has never been used.  Note that GCC
doesn't warn about this, because the function is marked as inline.
According to gcc's man page, it should ideed not warn:

  -Wunused-function
    Warn whenever a static function is declared but not defined or a non-inline static function is unused.  This warning is enabled by -Wall.

So it's probably not a GCC bug that it doesn't find this unused function, but a
different definition of "unused".

gdb/ChangeLog:

* record-full.c (netorder16): Remove.

7 years agovec: Silence -Wunused-function warnings on clang
Simon Marchi [Mon, 26 Jun 2017 13:08:35 +0000 (15:08 +0200)]
vec: Silence -Wunused-function warnings on clang

clang has a too aggressive (or broken, depends on how you want to see
it) -Wunused-function warning, which is triggered by the functions
defined by DEF_VEC_* but not used in the current source file.  Normally,
it won't warn about unused static inline functions defined in header
files, because it's expected that a source file won't use all functions
defined in a header file it includes.  However, if the DEF_VEC_* macro
is used in a source file, it considers those functions as defined in the
source file, which leads it to think that we should remove those
functions.  It is therefore missing a check to see whether those
functions are resulting from macro expansion.  A bug already exists for
that:

  https://bugs.llvm.org//show_bug.cgi?id=22712

It's quite easy to silence this warning in a localized way, that is in
the DEF_VEC_* macros.

gdb/ChangeLog:

* common/diagnostics.h: Define macros for GCC.
(DIAGNOSTIC_IGNORE_UNUSED_FUNCTION): New macro.
* common/vec.h: Include diagnostics.h.
(DIAGNOSTIC_IGNORE_UNUSED_VEC_FUNCTION): New macro.
(DEF_VEC_I, DEF_VEC_P, DEF_VEC_O): Ignore -Wunused-function
warning.

7 years agoada-lex: Ignore warnings about register keyword
Simon Marchi [Mon, 26 Jun 2017 13:08:35 +0000 (15:08 +0200)]
ada-lex: Ignore warnings about register keyword

Some older versions of flex (such as the one shipped with macOS) generate
code that use the register keyword, which clang warns about.  This patch
makes the compiler ignore those warnings for the portion of the code
generated by flex.

gdb/ChangeLog:

* common/diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_REGISTER):
New macro.
* ada-lex.l: Ignore deprecated register warnings.

7 years agoFix address violation parsing a corrupt texhex format file.
Nick Clifton [Mon, 26 Jun 2017 14:46:34 +0000 (15:46 +0100)]
Fix address violation parsing a corrupt texhex format file.

PR binutils/21670
* tekhex.c (getvalue): Check for the source pointer exceeding the
end pointer before the first byte is read.

7 years agoFix address violations when atempting to parse fuzzed binaries.
Nick Clifton [Mon, 26 Jun 2017 14:25:08 +0000 (15:25 +0100)]
Fix address violations when atempting to parse fuzzed binaries.

PR binutils/21665
bfd * opncls.c (get_build_id): Check that the section is beig enough
to contain the whole note.
* compress.c (bfd_get_full_section_contents): Check for and reject
a section whoes size is greater than the size of the entire file.
* elf32-v850.c (v850_elf_copy_notes): Allow for the ouput to not
contain a notes section.

binutils* objdump.c (disassemble_section): Skip any section that is bigger
than the entire file.

7 years agoProduce a consistent warning message when attempting to run a tool on a directory.
Nick Clifton [Mon, 26 Jun 2017 12:25:41 +0000 (13:25 +0100)]
Produce a consistent warning message when attempting to run a tool on a directory.

PR binutils/21659
* bucomm.c (get_file_size): Explicitly warn if the file is a
directory.

7 years agoCheck unsupported .symver with common symbol
H.J. Lu [Mon, 26 Jun 2017 12:11:07 +0000 (05:11 -0700)]
Check unsupported .symver with common symbol

The .symver directive on common symbol creates a new common symbol,
which shouldn't be allowed, similar to alias on common symbol:

$ cat y.S
.comm bar,8,8
 .set bar1,bar
$ as -o y.o y.S
y.S: Assembler messages:
y.S:2: Error: `bar1' can't be equated to common symbol 'bar'
$

PR gas/21661
* config/obj-elf.c (obj_elf_symver): Don't allow .symver with
common symbol.
(elf_frob_symbol): Likewise.
* testsuite/gas/elf/elf.exp: Run pr21661.
* testsuite/gas/elf/pr21661.d: New file.
* testsuite/gas/elf/pr21661.s: Likewise.

7 years agoAdd pgste marker changelog
Andreas Krebbel [Mon, 26 Jun 2017 09:07:17 +0000 (11:07 +0200)]
Add pgste marker changelog

7 years agoS/390: Fix testsuite segfault added with recent pgste patch.
Andreas Krebbel [Mon, 26 Jun 2017 09:01:58 +0000 (11:01 +0200)]
S/390: Fix testsuite segfault added with recent pgste patch.

The recent pgste patch caused several testcases to fail with a
segfault.  Fixed with this patch by adding NULL pointer checks.

regression-tested on s390x.

bfd/ChangeLog:

2017-06-26  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf64-s390.c (elf_s390_additional_program_headers): Add NULL
pointer checks.
(elf_s390_modify_segment_map): Likewise.
(bfd_elf_s390_set_options): Lisewise.

7 years agoFix compile time warning building gas for arm-wince target.
Nick Clifton [Mon, 26 Jun 2017 08:28:51 +0000 (09:28 +0100)]
Fix compile time warning building gas for arm-wince target.

* config/tc-arm.c (fpu_any): Only define for ELF based targets.

7 years agoUpdate check conditions for illegal placed instructions.
claziss [Wed, 7 Jun 2017 13:57:56 +0000 (15:57 +0200)]
Update check conditions for illegal placed instructions.

ARC cpus do not accept any jump or instructions with long immediate
into the delay slots.

gas/
2017-06-07  Claudiu Zissulescu  <claziss@synopsys.com>

* /config/tc-arc.c (is_br_jmp_insn_p): Update macro with known
instructions to be accounted as jumps.
(assemble_insn): Check for limms into the delay slots.  Emit an
error if so.
* testsuite/gas/arc/asm-errors-3.d: New file.
* testsuite/gas/arc/asm-errors-3.err: Likewise.
* testsuite/gas/arc/asm-errors-3.s: Likewise.

7 years agoAutomatic date update in version.in
GDB Administrator [Mon, 26 Jun 2017 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoDon't attach linker created section to --just-syms bfd
Alan Modra [Sun, 25 Jun 2017 23:40:22 +0000 (09:10 +0930)]
Don't attach linker created section to --just-syms bfd

All sections on a --just-syms bfd are discarded from the output, so
attaching linker created sections to such a bfd results in errors.
In other cases, like the .note.GNU-stack check, it's wrong to have a
--just-syms object potentially affect the output.

bfd/
* elflink.c (_bfd_elf_link_create_dynstrtab): Don't make dynobj
a --just-syms bfd.
(_bfd_elf_size_group_sections): Skip --just-syms bfds.
(bfd_elf_size_dynamic_sections): Ignore .note.GNU-stack and
.preinit_array on --just-syms bfds.
(_bfd_elf_gc_mark_extra_sections): Skip --just-syms bfds.
(elf_gc_sweep, bfd_elf_parse_eh_frame_entries): Likewise.
(bfd_elf_gc_sections, bfd_elf_discard_info): Likewise.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Skip
--just-syms bfds when looking for a place to attach .note.gnu.build-id
and .eh_frame_hdr sections.  Delete dead code.

7 years agomain: Don't add int to string
Simon Marchi [Sun, 25 Jun 2017 10:57:13 +0000 (12:57 +0200)]
main: Don't add int to string

clang shows this warning:

  /home/emaisin/src/binutils-gdb/gdb/main.c:227:56: error: adding 'int' to a string does not append to the string [-Werror,-Wstring-plus-int]
                char *tmp_sys_gdbinit = xstrdup (SYSTEM_GDBINIT + datadir_len);
                                                 ~~~~~~~~~~~~~~~^~~~~~~~~~~~~
  /home/emaisin/src/binutils-gdb/gdb/main.c:227:56: note: use array indexing to silence this warning
                char *tmp_sys_gdbinit = xstrdup (SYSTEM_GDBINIT + datadir_len);
                                                                ^
                                                 &              [            ]

It's quite easy to get rid of it by using &foo[len] instead of foo + len.
I think this warning is relevant to keep enabled, because it can be an
easy mistake to do.

This warning is already discussed here in GCC bugzilla:

  https://gcc.gnu.org/ml/gcc-patches/2017-06/msg00729.html

and a patch series for it was submitted very recently.

gdb/ChangeLog:

* main.c (get_init_files): Replace "SYSTEM_GDBINIT +
datadir_len" with "&SYSTEM_GDBINIT[datadir_len]".

7 years agodtrace-probe: Put semicolon after while on its own line
Simon Marchi [Sun, 25 Jun 2017 10:49:19 +0000 (12:49 +0200)]
dtrace-probe: Put semicolon after while on its own line

clang shows this warning.

  /home/emaisin/src/binutils-gdb/gdb/dtrace-probe.c:424:52: error: while loop has empty body [-Werror,-Wempty-body]
            while (*p++ != '\0' && p - strtab < strtab_size);
                                                            ^
  /home/emaisin/src/binutils-gdb/gdb/dtrace-probe.c:424:52: note: put the semicolon on a separate line to silence this warning

Putting the semicolon on its own line is not a big sacrifice to get rid of this
warning.  I think it's also useful to keep this, because it can catch errors
like this:

  while (something);
    {
      ...
    }

although gcc would warn about it in a different way (misleading indentation).

This warning is already discussed here in the GCC bugzilla:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=62184

gdb/ChangeLog:

* dtrace-probe.c (dtrace_process_dof_probe): Put semi-colon on
its own line.

7 years agox86-dregs: Print debug registers one per line
Simon Marchi [Sun, 25 Jun 2017 10:38:59 +0000 (12:38 +0200)]
x86-dregs: Print debug registers one per line

This get around this warning given by clang...

  /home/emaisin/src/binutils-gdb/gdb/nat/x86-dregs.c:209:7: error: variable 'i' is incremented both in the loop header and in the loop body [-Werror,-Wfor-loop-analysis]
        i++;
        ^
  /home/emaisin/src/binutils-gdb/gdb/nat/x86-dregs.c:199:32: note: incremented here
    ALL_DEBUG_ADDRESS_REGISTERS (i)
                               ^

... I decided in the end to simply print the debug registers one per
line.  I don't think it particularly helps readability to have them two
per line anyway.

gdb/ChangeLog:

* nat/x86-dregs.c (x86_show_dr): Print registers one per line.

7 years agoSync libiberty with upstream GCC.
Iain Buclaw [Sun, 25 Jun 2017 09:39:34 +0000 (11:39 +0200)]
Sync libiberty with upstream GCC.

libiberty/ChangeLog:

* d-demangle.c (dlang_identifier): Prefix mangled init symbols
with `initializer for'.
* testsuite/demangle-expected: Update tests.

* d-demangle.c (dlang_call_convention_p): Move declaration
before dlang_type.
(dlang_type): Handle function types.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_parse_real): Remove stack buffer, write
the demangled hexadecimal directly to string.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_hexdigit): New function.
(ascii2hex): Remove function.
(dlang_parse_string): Update to call dlang_hexdigit.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (strtol): Remove declaration.
Updated all callers to use dlang_number.
(dlang_number): New function.
(dlang_value): Moved check for ISDIGIT into dlang_parse_integer.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_parse_symbol): Remove function.
(dlang_parse_qualified): New function.
(dlang_parse_mangle): New function.
(dlang_type): Update to call dlang_parse_qualified.
(dlang_identifier): Update to call either dlang_parse_qualified or
dlang_parse_mangle.
(dlang_type_modifier_p): Remove function.
(dlang_call_convention_p): Don't allow type modifiers in mangle.
(dlang_template_args): Update to call dlang_identifier.
(dlang_demangle): Update to call dlang_parse_mangle.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_value): Add comment explaining why cases for
digits are required.
* testsuite/d-demangle-expected: Update integer value tests.

* d-demangle.c (dlang_parse_symbol): Skip over anonymous symbols.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_identifier): Handle template constraint symbols.
(dlang_parse_template): Only advance if template symbol prefix is
followed by a digit.
* testsuite/d-demangle-expected: Add tests.

* d-demangle.c (dlang_attributes): Handle scope attributes.
* testsuite/d-demangle-expected: Add tests.

7 years agoSync libiberty with upstream GCC.
Iain Buclaw [Sun, 25 Jun 2017 09:39:05 +0000 (11:39 +0200)]
Sync libiberty with upstream GCC.

libiberty/ChangeLog:

PR demangler/80513
* cp-demangle.c (d_number): Check for overflow.
* cplus-dem.c (consume_count): Fix overflow check.
(gnu_special): Check for underscore after thunk delta.
* testsuite/demangle-expected: Add tests for overflows and invalid
characters in thunks.

* cp-demangle.c (MAX_RECURSION_COUNT): New constant.
(struct d_print_info): Add recursion field.
(d_print_init): Initialize recursion.
(d_print_comp): Check and update d_print_info recursion depth.

* cp-demangle.c (d_substitution): Return NULL if d_add_substitution
fails.

* cp-demangle.h (struct d_info): Remove did_subs field.
* cp-demangle.c (struct d_info_checkpoint): Likewise.
(d_template_param): Don't update did_subs.
(d_substitution): Likewise.
(d_checkpoint): Don't assign did_subs.
(d_backtrack): Likewise.
(cplus_demangle_init_info): Don't initialize did_subs.

7 years agofix out-of-bounds access in elf.c:find_link
Sergei Trofimovich [Sat, 24 Jun 2017 17:40:41 +0000 (18:40 +0100)]
fix out-of-bounds access in elf.c:find_link

The out-of-bounds access is reproducible on 'ia64-strip' command
(see sample from https://bugs.gentoo.org/show_bug.cgi?id=622500)

The output file contains less section than original one.
This tricks 'hint' access to go out-of-bounds:

* elf.c (find_link): Bounds check "hint".

7 years agoAutomatic date update in version.in
GDB Administrator [Sun, 25 Jun 2017 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years ago[ARM] Add support for ARM Cortex-R52 processor
Thomas Preud'homme [Sat, 24 Jun 2017 09:56:32 +0000 (10:56 +0100)]
[ARM] Add support for ARM Cortex-R52 processor

=== Context ===

This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARM Cortex-R52
processor.

=== Patch description ===

This patch adds support for Cortex-R52 as an ARMv8-R processor with CRC
extensions.

2017-06-26  Thomas Preud'homme  <thomas.preudhomme@arm.com>

gas/
* NEWS: Mention support of ARM Cortex-R52 processor.
* config/tc-arm.c (arm_cpus): Add entry for ARM Cortex-R52 processor.
* doc/c-arm.texi: Mention support for -mcpu=cortex-r52.

7 years ago[ARM] Add linker support for ARMv8-R
Thomas Preud'homme [Sat, 24 Jun 2017 09:48:08 +0000 (10:48 +0100)]
[ARM] Add linker support for ARMv8-R

=== Context ===

This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in the linker.

=== Patch description ===

This patch is composed of 3 changes:

1) The main change is the addition of the logic for merging a file whose
Tag_CPU_arch build attribute is 15 (ARMv8-R). Namely, all pre-ARMv8 are
merged into ARMv8-R as well as ARMv8-R itself. ARMv8-A (14) merges into
ARMv8-A. ARMv8-M Baseline (16) and Mainline (17) are not allowed to
merge merge with ARMv8-R. Note that merging only occurs if the two
profiles are identical or one is S (Application or Realtime) and the
other is R.

2) using_thumb_only, using_thumb2_bl, using_thumb2 and arch_has_arm_nop
are updated according to capabilities of ARMv8-R and their BFD_ASSERT
updated to reflect that the logic is valid for ARMv8-R.

3) 2 build attribute merging tests are added to test the first change.

2017-06-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf32-arm.c (using_thumb_only): Update list of architectures in
BFD_ASSERT for which the logic is valid.
(using_thumb2_bl): Likewise.
(using_thumb2): Likewise and return true for ARMv8-R.
(arch_has_arm_nop): Likewise.
(tag_cpu_arch_combine): New v8r table for ARMv8-R Tag_CPU_arch
merging logic.  Update commentis for value 15 of v8m_baseline,
v8m_mainline and v4t_plus_v6_m arrays.  Use v8r array to decide
merging of value 15 of Tag_CPU_arch.

ld/
* testsuite/ld-arm/arm-elf.exp (EABI attribute merging 11): New test.
(EABI attribute merging 12): Likewise.
* testsuite/ld-arm/attr-merge-11a.s: New file.
* testsuite/ld-arm/attr-merge-11b.s: New file.
* testsuite/ld-arm/attr-merge-11.attr: New file.
* testsuite/ld-arm/attr-merge-12a.s: New file.
* testsuite/ld-arm/attr-merge-12b.s: New file.
* testsuite/ld-arm/attr-merge-12.attr: New file.

7 years ago[ARM] Add support for ARMv8-R in assembler and readelf
Thomas Preud'homme [Sat, 24 Jun 2017 09:37:47 +0000 (10:37 +0100)]
[ARM] Add support for ARMv8-R in assembler and readelf

=== Context ===

This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.

=== Patch description ===

Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.

Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.

2017-06-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.

gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This.  Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This.  Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This.  Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This.  Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This.  Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This.  Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This.  Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This.  Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This.  Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This.  Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.

include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.

7 years ago[ARM] Remove ARMv6S-M special casing
Thomas Preud'homme [Sat, 24 Jun 2017 09:26:41 +0000 (10:26 +0100)]
[ARM] Remove ARMv6S-M special casing

=== Context ===

This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to remove special casing for ARMv6S-M
autodetection.

=== Motivation ===

Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor
architectures with extra checks in the handler function (do_t_swi) to
give an error message when ARMv6-M is targeted and some more special
casing in aeabi_set_public_attributes. This was made to exclude these
mnemonics for ARMv6-M unless the OS extension is in use.

However this logic is superfluous: there is already code to check
whether an instruction is available based on the feature bit it is part
of and whether the targeted architecture has that feature bit. This
patch aims at removing that unneeded complexity.

=== Patch description ===

The OS extension is already limited to the ARMv6-M architecture so all
this patch does is redefined availability of the ARM_EXT_OS feature bit
to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any
change either because it already includes ARM_EXT_OS.

The patch also make sure that the error message that was given by
do_t_swi when SWI/SVC is unavailable is still the same by detecting the
situation in md_assemble.

2017-06-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>

gas/
* config/tc-arm.c (arm_ext_v6m): Delete.
(arm_ext_v7m): Delete.
(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
profile.
(arm_arch_v6m_only): Delete.
(do_t_swi): Remove special case for ARMv6S-M.
(md_assemble): Display error message previously in do_t_swi when
SVC is not available.
(insns): Guard swi and svc by arm_ext_os for Thumb mode.
(aeabi_set_public_attributes): Remove special case for ARMv6S-M.

include/
* opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set.
(ARM_AEXT_V4T): Likewise.
(ARM_AEXT_V5TxM): Likewise.
(ARM_AEXT_V5T): Likewise.
(ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.

7 years agoAutomatic date update in version.in
GDB Administrator [Sat, 24 Jun 2017 00:00:42 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoRISC-V: Fix SLTI disassembly
Andrew Waterman [Mon, 15 May 2017 15:50:57 +0000 (08:50 -0700)]
RISC-V: Fix SLTI disassembly

2017-06-23  Andrew Waterman  <andrew@sifive.com>

* riscv-opc.c (riscv_opcodes): Mark I-type SLT instruction as an
alias; do not mark SLTI instruction as an alias.

7 years agoRISC-V: Error, don't warn, for shfit amounts/CSRs
Andrew Waterman [Thu, 11 May 2017 06:59:50 +0000 (23:59 -0700)]
RISC-V: Error, don't warn, for shfit amounts/CSRs

gas/ChangeLog

2017-05-11  Andrew Waterman  <andrew@sifive.com>

       * config/tc-riscv.c (riscv_ip): Changes as_warn to as_bad for improper
       shift amounts.

7 years ago[AArch64] Fix typo in comments on relocation name
Jiong Wang [Thu, 22 Jun 2017 11:04:42 +0000 (12:04 +0100)]
[AArch64] Fix typo in comments on relocation name

BFD_RELOC_AARCH64_ADR_GOTPAGE should be BFD_RELOC_AARCH64_ADR_GOT_PAGE.

bfd/
  * reloc.c (BFD_RELOC_AARCH64_ADR_GOTPAGE): Rename to
  BFD_RELOC_AARCH64_ADR_GOT_PAGE
  * bfd-in2.h: Regenerated.

7 years ago[GOLD] PowerPC64 localentry:0 plt call optimization
Alan Modra [Fri, 23 Jun 2017 11:09:43 +0000 (20:39 +0930)]
[GOLD] PowerPC64 localentry:0 plt call optimization

elfcpp/
* elfcpp.h (DT_PPC64_OPT): Define.
* powerpc.h (PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC,
PPC64_OPT_LOCALENTRY): Define.
gold/
* options.h (General_options): Add plt_localentry.
* powerpc.cc (Target_powerpc::st_other): New function.
(Target_powerpc::plt_localentry0_, plt_localentry0_init_,
has_localentry0_): New vars.
(Target_powerpc::plt_localentry0, set_has_localentry0,
is_elfv2_localentry0): New functions.
(Target_powerpc::Branch_info::mark_pltcall): Don't set tocsave or
return true for localentry:0 calls.
(Stub_table::Plt_stub_ent::localentry0_): New var.
(Stub_table::add_plt_call_entry): Set localentry0_ and has_localentry0_.
Don't set r2save_ for localentry:0 calls.
(Output_data_glink::do_write): Save r2 in __glink_PLTresolve for elfv2.
(Target_powerpc::scan_relocs): Default plt_localentry0_.
(Target_powerpc::do_finalize_sections): Set DT_PPC64_OPT.
(Target_powerpc::Relocate::relocate): Don't require nop following
calls for localentry:0 plt calls, and don't change nop.

7 years ago[GOLD] PowerPC64 tocsave
Alan Modra [Fri, 23 Jun 2017 11:07:34 +0000 (20:37 +0930)]
[GOLD] PowerPC64 tocsave

This adds support to gold for the tocsave relocs already supported by
ld.bfd.  R_PPC64_TOCSAVE relocs are part of a scheme to move r2 saves
to the prologue of a function rather than in each plt call stub.  We
don't want a compiler to always emit the r2 save, as this would be
wasted if the calls turned out to be local.  See the tocsave*.s in
ld/testsuite/ld-powerpc/.

* powerpc.cc (Target_powerpc::tocsave_loc_): New var.
(Target_powerpc::mark_pltcall, add_tocsave, tocsave_loc): New functions.
(Target_powerpc::Branch_info::tocsave_): New var.
(Target_powerpc::Branch_info::mark_pltcall): New function.
(Target_powerpc::Branch_info::make_stub): Pass tocsave_ to
add_plt_call_entry.
(Stub_table::Plt_stub_ent): Make public.  Add r2save_.
(Stub_table::add_plt_call_entry): Add bool tocsave_ param.  Set
r2save_.
(Stub_table::find_plt_call_entry): Return Plt_stub_ent*.  Adjust
use throughout.
(Stub_table::do_write): Conditionally output r2 save in plt stubs.
(Target_powerpc::Scan::local): Handle R_PPC64_TOCSAVE.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Skip r2 save in plt call stub
with tocsave reloc.  Replace header tocsave nop with r2 save.
* symtab.h (struct Symbol_location_hash): Make public.

7 years agoMake the strings utility reject directories.
Nick Clifton [Fri, 23 Jun 2017 09:22:36 +0000 (10:22 +0100)]
Make the strings utility reject directories.

PR binutils/21659
* strings.c (strings_file): Warn about attempts to run strings on
a directory.

7 years agoAdd XTENSA_MAX_REGISTER_SIZE
Alan Hayward [Fri, 23 Jun 2017 09:21:39 +0000 (10:21 +0100)]
Add XTENSA_MAX_REGISTER_SIZE

gdb/
* xtensa-tdep.c (XTENSA_MAX_REGISTER_SIZE): Add.
(xtensa_register_write_masked): Use XTENSA_MAX_REGISTER_SIZE.
(xtensa_register_read_masked): Likewise.

7 years agoS/390: Add support for pgste marker
Andreas Krebbel [Thu, 8 Jun 2017 15:24:50 +0000 (17:24 +0200)]
S/390: Add support for pgste marker

This patch adds a new S/390 specific segment type: PT_S390_PGSTE.  For
binaries marked with that segment the kernel will allocate 4k page
tables.  The only user so far will be qemu.

ld/ChangeLog:

2017-06-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* Makefile.in: Add s390.em as build dependency.
* emulparams/elf64_s390.sh (EXTRA_EM_FILE): Add s390.em.
* emultempl/s390.em: New file.
* gen-doc.texi: Add documentation for --s390-pgste option.
* ld.texinfo: Likewise.

include/ChangeLog:

2017-06-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf/s390.h (PT_S390_PGSTE): Define macro.

binutils/ChangeLog:

2017-06-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* readelf.c (get_s390_segment_type): Add support for the new
segment type PT_S390_PGSTE.
(get_segment_type): Call get_s390_segment_type.

elfcpp/ChangeLog:

2017-06-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elfcpp.h (enum PT): Add PT_S390_PGSTE to enum.

bfd/ChangeLog:

2017-06-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf-s390.h: New file.
* elf64-s390.c (struct elf_s390_link_hash_table): Add params
field.
(elf_s390_additional_program_headers): New function.
(elf_s390_modify_segment_map): New function.
(bfd_elf_s390_set_options): New function.
(elf_backend_additional_program_headers)
(elf_backend_modify_segment_map): Add macro definitions.

7 years agoAutomatic date update in version.in
GDB Administrator [Fri, 23 Jun 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoi386: Add hidden weak undefined tests
H.J. Lu [Thu, 22 Jun 2017 22:13:15 +0000 (15:13 -0700)]
i386: Add hidden weak undefined tests

* testsuite/ld-i386/i386.exp: Run weakundef1 tests.
* testsuite/ld-i386/weakundef1.c: New file.

7 years agox86-64: Move the error_alignment label forward
H.J. Lu [Thu, 22 Jun 2017 21:26:09 +0000 (14:26 -0700)]
x86-64: Move the error_alignment label forward

Move the error_alignment label forward to avoid clang warning on

if (!bfd_set_section_alignment (ebfd, sec, 2))
  goto error_alignment;

htab = elf_x86_64_hash_table (info);

error_alignment:
  info->callbacks->einfo (_("%F%A: failed to align section\n"), sec);
                             "%F" causes a fatal linker error and
     immediate exit.

sec = htab->elf.sgotplt;

Also fix alignment on program property note section.

* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Move
the error_alignment label forward.  Properly align program
property note section.

7 years agoPass $NOPIE_CFLAGS to ELF visibility tests
H.J. Lu [Thu, 22 Jun 2017 19:53:39 +0000 (12:53 -0700)]
Pass $NOPIE_CFLAGS to ELF visibility tests

PR ld/21090
* testsuite/ld-elfvsb/elfvsb.exp (visibility_run): Pass
$NOPIE_CFLAGS if non-PIE is required.

7 years agox86: Resolve local undefined weak symbol to 0
H.J. Lu [Thu, 22 Jun 2017 19:53:39 +0000 (12:53 -0700)]
x86: Resolve local undefined weak symbol to 0

Local undefined weak symbol should always be resolved to 0.

* elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Resolve
local undefined weak symbol to 0.
* elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): Likewise.

7 years agoUpdate comment on gdb_environ::unset
Sergio Durigan Junior [Thu, 22 Jun 2017 18:50:24 +0000 (14:50 -0400)]
Update comment on gdb_environ::unset

gdb_environ::unset iterates using '.end () - 1' now, instead of '.cend
() - 1'.  This obvious patch updates the comment.

gdb/ChangeLog:
2017-06-22  Sergio Durigan Junior  <sergiodj@redhat.com>

* common/environ.c (gdb_environ::unset): Update comment.

7 years ago2017-06-22 Eric Christopher <echristo@gmail.com>
Eric Christopher [Thu, 22 Jun 2017 17:57:52 +0000 (10:57 -0700)]
2017-06-22  Eric Christopher  <echristo@gmail.com>

        * elf32-arm.c (elf32_arm_final_link_relocate): Use labs rather than
abs to fix a truncation warning.

7 years agoPass $NOPIE_CFLAGS/$NOPIE_LDFLAGS to "Run pr19031"
H.J. Lu [Thu, 22 Jun 2017 17:07:53 +0000 (10:07 -0700)]
Pass $NOPIE_CFLAGS/$NOPIE_LDFLAGS to "Run pr19031"

PR ld/21090
* testsuite/ld-i386/i386.exp: Pass $NOPIE_CFLAGS and
$NOPIE_LDFLAGS to "Run pr19031".

7 years agoPass $NOPIE_CFLAGS and $NOPIE_LDFLAGS to more ELF tests
H.J. Lu [Thu, 22 Jun 2017 16:53:33 +0000 (09:53 -0700)]
Pass $NOPIE_CFLAGS and $NOPIE_LDFLAGS to more ELF tests

PR ld/21090
* testsuite/ld-gc/gc.ex: Compile tmpdir/pr14265.o with
$NOPIE_CFLAGS.
* testsuite/ld-i386/i386.exp: Pass $NOPIE_CFLAGS and
$NOPIE_LDFLAGS if non-PIE is required.
* testsuite/ld-i386/no-plt.exp (NOPIE_CFLAGS): New.
(NOPIE_LDFLAGS): Likewise.
Pass $NOPIE_LDFLAGS if non-PIE is required.
* testsuite/ld-shared/shared.exp: Compile tmpdir/sh1np.o with
$NOPIE_CFLAGS.

7 years agoFix cached_frame allocation in py-unwind
Alan Hayward [Thu, 22 Jun 2017 15:30:15 +0000 (16:30 +0100)]
Fix cached_frame allocation in py-unwind

gdb/
* python/py-unwind.c (pyuw_sniffer): Allocate space for
registers.

7 years agoRemove an instance of MAX_REGISTER_SIZE from record-full.c
Alan Hayward [Thu, 22 Jun 2017 14:33:18 +0000 (15:33 +0100)]
Remove an instance of MAX_REGISTER_SIZE from record-full.c

gdb/
* record-full.c (record_full_exec_insn): Use byte_vector.

7 years agoRegenerate two regformats/i386/.dat files
Yao Qi [Thu, 22 Jun 2017 12:41:27 +0000 (13:41 +0100)]
Regenerate two regformats/i386/.dat files

The self tests which compare pre-generated target descriptions and
dynamically created target descriptions fail, and it turns out that two
pre-generated target descriptions are wrong, so regenerate them.

gdb:

2017-06-22  Yao Qi  <yao.qi@linaro.org>

* regformats/i386/amd64-avx-mpx-avx512-pku-linux.dat: Regenerated.
* regformats/i386/amd64-avx-mpx-avx512-pku.dat: Regenerated.

7 years agoRemove MAX_REGISTER_SIZE from py-unwind.c
Alan Hayward [Thu, 22 Jun 2017 13:09:52 +0000 (14:09 +0100)]
Remove MAX_REGISTER_SIZE from py-unwind.c

gdb/
* remote.c (cached_reg): Move from here...
* regcache.h (cached_reg): ...to here.
* python/py-unwind.c (struct reg_info): Remove.
(cached_frame_info): Use cached_reg_t.
(pyuw_prev_register): Likewise.
(pyuw_sniffer): Use cached_reg_t and allocate registers.
(pyuw_dealloc_cache): Free all registers.

7 years agox86: Support Intel Shadow Stack with SHSTK property
H.J. Lu [Thu, 22 Jun 2017 12:50:20 +0000 (05:50 -0700)]
x86: Support Intel Shadow Stack with SHSTK property

To support Intel Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) instructions:

https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf

 #define GNU_PROPERTY_X86_FEATURE_1_SHSTK (1U << 1)

is added to GNU program properties to indicate that all executable sections
are compatible with SHSTK where return address popped from shadow stack
always matches return address popped from normal stack.

GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on output only if it is set on all
relocatable inputs.

bfd/

* elf32-i386.c (elf_i386_merge_gnu_properties): If info->shstk
is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_i386_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
* elf64-x86-64.c (elf_x86_64_merge_gnu_properties): If
info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_x86_64_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.

binutils/

* readelf.c (decode_x86_feature): Decode
GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* testsuite/binutils-all/i386/shstk.d: New file.
* testsuite/binutils-all/i386/shstk.s: Likewise.
* testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.s: Likewise.

include/

* bfdlink.h (bfd_link_info): Add shstk.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_SHSTK): New.

ld/

* NEWS: Mention -z shstk and GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* emulparams/cet.sh (PARSE_AND_LIST_OPTIONS_CET): Add "-z shstk".
(PARSE_AND_LIST_ARGS_CASE_Z_CET): Support "-z shstk".
* ld.texinfo: Document -z shstk.
* testsuite/ld-i386/i386.exp: Run SHSTK tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-shstk.s: New file.
* testsuite/ld-i386/property-x86-shstk1a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk1b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk2.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk4.d: Likewise.
* testsuite/ld-i386/property-x86-shstk5.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk.s: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.

7 years agox86: Support Intel IBT with IBT property and IBT-enable PLT
H.J. Lu [Thu, 22 Jun 2017 12:44:37 +0000 (05:44 -0700)]
x86: Support Intel IBT with IBT property and IBT-enable PLT

To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:

https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf

 #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002

 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)

are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.

GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.

The followings changes are made to the Procedure Linkage Table (PLT):

1. For 64-bit x86-64,  PLT is changed to

PLT0:  push       GOT[1]
       bnd jmp    *GOT[2]
       nop
...
PLTn:  endbr64
       push       namen_reloc_index
       bnd jmp    PLT0

together with the second PLT section:

PLTn:  endbr64
       bnd jmp   *GOT[namen_index]
       nop

BND prefix is also added so that IBT-enabled PLT is compatible with MPX.

2. For 32-bit x86-64 (x32) and i386,  PLT is changed to

PLT0:  push       GOT[1]
       jmp        *GOT[2]
       nop
...
PLTn:  endbr64                                 # endbr32 for i386.
       push       namen_reloc_index
       jmp        PLT0

together with the second PLT section:

PLTn:  endbr64                                 # endbr32 for i386.
       jmp       *GOT[namen_index]
       nop

BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.

GOT is an array of addresses.  Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section.  The function, namen, is called via the
ENDBR instruction in the second PLT entry.  GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.

2 linker command line options are added:

1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.

bfd/

* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT.  Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT.  Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.  If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.  Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.  If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.  Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.

binutils/

* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.

include/

* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.

ld/

* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.

7 years agoenviron-selftests: Ignore -Wself-move warning
Pedro Alves [Thu, 22 Jun 2017 08:31:20 +0000 (10:31 +0200)]
environ-selftests: Ignore -Wself-move warning

clang gives this warning:

 ..../gdb/unittests/environ-selftests.c:139:7: error: explicitly moving variable of type 'gdb_environ' to itself [-Werror,-Wself-move]
   env = std::move (env);
   ~~~ ^            ~~~

Ignoring the warning locally is the right thing to do, since it warns
about behavior we want to unit test, while an explicit self-move in
real code would likely be a mistake that we'd want to catch.

To avoid cluttering the code with preprocessor conditionals, this
commit adds the file common/diagnostics.h, in which we can put macros
used to control compiler diagnostics.

GCC enhancement request here:
  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81159

gdb/ChangeLog:
2017-06-22  Pedro Alves  <palves@redhat.com>
    Simon Marchi  <simon.marchi@ericsson.com>

* unittests/environ-selftests.c (run_tests): Ignore -Wself-move
warning.
* common/diagnostics.h: New file.

7 years agoAdd STRINGIFY to gdb/common/preprocessor.h
Pedro Alves [Thu, 22 Jun 2017 09:23:30 +0000 (10:23 +0100)]
Add STRINGIFY to gdb/common/preprocessor.h

We have several copies of this common idiom under gdb/ currently.
This commit moves them / factors them out to gdb/common/preprocessor.h.

gdb/ChangeLog:
2017-06-22  Pedro Alves  <palves@redhat.com>

* common/agent.h: Include "common/preprocessor.h".
(STRINGIZE_1, STRINGIZE): Delete.
(IPA_SYM): Use STRINGIFY instead.
* common/preprocessor.h (STRINGIFY_1, STRINGIFY): New.
* compile/compile-c-support.c: Include "common/preprocessor.h".
(STR, STRINGIFY): Delete.
* ia64-libunwind-tdep.c: Include "common/preprocessor.h".
(STRINGIFY2, STRINGIFY): Delete.

7 years agocommon/agent.h: Add missing include guards
Pedro Alves [Thu, 22 Jun 2017 09:57:13 +0000 (10:57 +0100)]
common/agent.h: Add missing include guards

gdb/ChangeLog:
2017-06-22  Pedro Alves  <palves@redhat.com>

* common/agent.h: Add include guards.

7 years agoFix address violation parsing a corrupt SOM binary.
Nick Clifton [Thu, 22 Jun 2017 09:33:56 +0000 (10:33 +0100)]
Fix address violation parsing a corrupt SOM binary.

PR binutils/21649
* som.c (setup_sections): NUL terminate the space_strings buffer.
Check that the space.name field does not index beyond the end of
the space_strings buffer.

7 years agoFix compile time warning about unused static variable.
Nick Clifton [Thu, 22 Jun 2017 08:34:12 +0000 (09:34 +0100)]
Fix compile time warning about unused static variable.

* config/tc-arm.c (arm_ext_v7m): Add ATTRIBUTE_UNUSED.

7 years agoAutomatic date update in version.in
GDB Administrator [Thu, 22 Jun 2017 00:01:05 +0000 (00:01 +0000)]
Automatic date update in version.in