Joel Brobecker [Mon, 7 Jan 2013 11:43:42 +0000 (11:43 +0000)]
Simplifly ptrace_request_to_str's implementation...
... following Pedro's advice of using a temporary macro.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Define a temporary
macro and use it to simplify this function's implementation.
Joel Brobecker [Mon, 7 Jan 2013 11:43:16 +0000 (11:43 +0000)]
Add ptrace error handling in lynx_resume
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_resume): Call perror_with_name if lynx_ptrace
sets errno.
Joel Brobecker [Mon, 7 Jan 2013 11:42:53 +0000 (11:42 +0000)]
Make x86-lynx GDBserver pass XML register map to GDB.
This is not strictly needed, since both GDB and GDBserver seem
to agree on the register numbering without this. But this allows
us to make sure that this is always going to be the case.
gdb/gdbserver/ChangeLog:
* configure.srv (i[34567]86-*-lynxos*): Set srv_xmlfiles.
Joel Brobecker [Mon, 7 Jan 2013 11:39:25 +0000 (11:39 +0000)]
Allow powerpc-*-lynxos* GDBserver to send register map via XML...
... back to GDB. The transfer occurs when GDB sends the
'qXfer:features:read:target.xml' packet. This allows us to make
sure that GDB and GDBserver use the same register numbering.
This is important on Lynx 178, where GDB selects the rs6000:6000
architecture by default instead of the powerpc:common architecture.
gdb/gdbserver/ChangeLog:
* configure.srv (powerpc-*-lynxos*): Set srv_xmlfiles.
Joel Brobecker [Mon, 7 Jan 2013 11:39:00 +0000 (11:39 +0000)]
LynxOS: Resume the same thread when receiving a thread create/exit event.
Before this patch, the ptid passed to lynx_resume was completely
ignored, and we used the current_inferior. This resulted in trying
to resume the inferior execution using the wrong ptid after having
received a thread create/exit event, because the inferior_ptid
was still set to the ptid prior to receiving the signal.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_resume): Use the resume_info parameter
to determine the ptid for the lynx_ptrace call, unless
it is equal to minus_one_ptid, in which case we use the
ptid of the current_inferior.
(lynx_wait_1): After having received a thread create/exit
event, resume the inferior's execution using the signaling
thread's ptid, rather than the old ptid.
Joel Brobecker [Mon, 7 Jan 2013 11:38:35 +0000 (11:38 +0000)]
Delete unused variable in lynx_resume
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_resume): Delete variable ret.
Joel Brobecker [Mon, 7 Jan 2013 11:14:37 +0000 (11:14 +0000)]
Fix build failure on darwin due to darwin_read_dyld_info not being defined.
gdb/ChangeLog:
* darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
used to decide whether to define darwin_read_dyld_info or not.
gdbadmin [Mon, 7 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 6 Jan 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Andreas Schwab [Sun, 6 Jan 2013 17:50:21 +0000 (17:50 +0000)]
* doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
* doc/c-score.texi (SCORE-Opts): Likewise.
* doc/c-tic54x.texi (TIC54X-Directives): Likewise.
gdbadmin [Sun, 6 Jan 2013 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 5 Jan 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Cary Coutant [Sat, 5 Jan 2013 00:00:51 +0000 (00:00 +0000)]
gold/
* configure.ac: Fix typo restoring CXXFLAGS.
* configure: Regenerate.
gdbadmin [Sat, 5 Jan 2013 00:00:35 +0000 (00:00 +0000)]
*** empty log message ***
Cary Coutant [Fri, 4 Jan 2013 23:50:27 +0000 (23:50 +0000)]
gold/
* testsuite/Makefile.am (CXXLINK_S): New macro.
(debug_msg_so.err, debug_msg_ndebug.err): Use CXXLINK_S.
* testsuite/Makefile.in: Regenerate.
Alan Modra [Fri, 4 Jan 2013 23:00:07 +0000 (23:00 +0000)]
daily update
Andreas Schwab [Fri, 4 Jan 2013 22:27:58 +0000 (22:27 +0000)]
* doc/binutils.texi (elfedit): Fix use of @itemx in @table.
Nick Clifton [Fri, 4 Jan 2013 17:22:53 +0000 (17:22 +0000)]
* archures.c: Add support for MIPS r5900
* bfd-in2.h: Add support for MIPS r5900
* config.bfd: Add support for Sony Playstation 2
* cpu-mips.c: Add support for MIPS r5900
* elfxx-mips.c: Add support for MIPS r5900 (extension of r4000)
* config/tc-mips.c: Add support for MIPS r5900
Add M_LQ_AB and M_SQ_AB to support large values for instructions lq and sq.
* config/tc-mips.c (can_swap_branch_p, get_append_method): Detect some conditional short loops to fix a bug on the r5900 by NOP in the branch delay slot.
* config/tc-mips.c (M_MUL): Support 3 operands in multu on r5900.
* config/tc-mips.c (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
* config/tc-mips.c (s_mipsset): Force 32 bit floating point on r5900.
* configure.in: Detect CPU type when target string contains r5900 (e.g. mips64r5900el-linux-gnu).
* config/tc-mips.c (mips_ip): Check parameter range of instructions mfps and mtps on r5900.
* elf/mips.h: Add MIPS machine variant number for r5900 which is compatible with old Playstation 2 software.
* opcode/mips.h: Add support for r5900 instructions including lq and sq.
* configure.tgt: Support ELF files for Sony Playstation 2 (for ps2dev and ps2sdk).
* emulparams/elf32lr5900n32.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI n32.
* emulparams/elf32lr5900.sh: Create linker script for Sony Playstation 2 ELF files using MIPS ABI o32.
* Makefile.am: Add linker scripts for Sony Playstation 2 ELF files.
* opcodes/mips-dis.c: Add names for CP0 registers of r5900.
* opcodes/mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for instructions sq and lq.
* opcodes/mips-opc.c: Add support for MIPS r5900 CPU.
Add support for 128 bit MMI (Multimedia Instructions).
Add support for EE instructions (Emotion Engine).
Disable unsupported floating point instructions (64 bit and undefined compare operations).
Enable instructions of MIPS ISA IV which are supported by r5900.
Disable 64 bit co processor instructions.
Disable 64 bit multiplication and division instructions.
Disable instructions for co-processor 2 and 3, because these are not supported (preparation for later VU0 support (Vector Unit)).
Disable cvt.w.s because this behaves like trunc.w.s and the correct execution can't be ensured on r5900.
Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This will confuse less developers and compilers.
Yufeng Zhang [Fri, 4 Jan 2013 14:59:33 +0000 (14:59 +0000)]
opcodes/
2013-01-04 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-opc.c (aarch64_print_operand): Change to print
AARCH64_OPND_IMM_MOV in hexadecimal in the instruction and in decimal
in comment.
* aarch64-tbl.h (aarch64_opcode_table): Remove the 'F_PSEUDO' flag
from the opcode entries of OP_MOV_IMM_LOG, OP_MOV_IMM_WIDEN and
OP_MOV_IMM_WIDE.
gas/testsuite/
2013-01-04 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/int-insns.d: Update.
* gas/aarch64/mov.d: Update.
* gas/aarch64/reloc-insn.d: Update.
ld/testsuite/
2013-01-04 Yufeng Zhang <yufeng.zhang@arm.com>
* ld-aarch64/emit-relocs-264.d: Append the '-Mno-aliases' option to
the objdump directive.
* ld-aarch64/emit-relocs-266.d: Ditto.
* ld-aarch64/emit-relocs-268.d: Ditto.
* ld-aarch64/emit-relocs-269.d: Ditto.
* ld-aarch64/emit-relocs-270.d: Ditto.
* ld-aarch64/emit-relocs-271.d: Ditto.
* ld-aarch64/emit-relocs-272.d: Ditto.
Nick Clifton [Fri, 4 Jan 2013 13:32:06 +0000 (13:32 +0000)]
* aarch64-opc.c (aarch64_prfops): Update to support PLIL1KEEP,
PLIL1STRM, PLIL2KEEP, PLIL2STRM, PLIL3KEEP and PLIL3STRM.
* gas/aarch64/system.d: Update.
gdbadmin [Fri, 4 Jan 2013 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 3 Jan 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Pierre Muller [Thu, 3 Jan 2013 22:18:35 +0000 (22:18 +0000)]
* main.c (relocate_gdb_directory): Avoid calling stat function
if DIR is empty.
Marcus Shawcroft [Thu, 3 Jan 2013 17:15:23 +0000 (17:15 +0000)]
Adding myself as AArch64 co-maintainer.
2013-01-03 Marcus Shawcroft <marcus.shawcroft@arm.com>
* MAINTAINERS: Add myself as AArch64 co-maintainer.
Nick Clifton [Thu, 3 Jan 2013 15:47:46 +0000 (15:47 +0000)]
* elflink.c (get_value): Prevent the use of an undefined shift
operation. Add sanity checks.
Yao Qi [Thu, 3 Jan 2013 07:17:52 +0000 (07:17 +0000)]
gdb/
* psymtab.c (fixup_psymbol_section): Update declaration.
(fixup_psymbol_section): Remove code returning value.
Yao Qi [Thu, 3 Jan 2013 07:13:28 +0000 (07:13 +0000)]
gdb/
* symtab.h: Remove some out of date comments.
(enum exception_event_kind): Move it ...
* breakpoint.c: ... here.
gdbadmin [Thu, 3 Jan 2013 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 2 Jan 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Mike Frysinger [Wed, 2 Jan 2013 21:07:53 +0000 (21:07 +0000)]
add bug number to previous commit
Mike Frysinger [Wed, 2 Jan 2013 21:06:30 +0000 (21:06 +0000)]
gdb: fix building on Darwin 9
TASK_DYLD_INFO_COUNT etc. are not defined.
Tom Tromey [Wed, 2 Jan 2013 18:52:07 +0000 (18:52 +0000)]
* symfile.h (struct ecoff_debug_hack): Remove.
* objfiles.c: Don't include mdebugread.h.
H.J. Lu [Wed, 2 Jan 2013 18:39:21 +0000 (18:39 +0000)]
Update gold copyright year to 2013
* version.cc (print_version): Update copyright year to 2013.
H.J. Lu [Wed, 2 Jan 2013 17:15:38 +0000 (17:15 +0000)]
Update copyright year to 2013
binutils/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* version.c (print_version): Update copyright year to 2013.
gas/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* as.c (parse_args): Update copyright year to 2013.
ld/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* ldver.c (ldversion): Update copyright year to 2013.
opcodes/
2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update copyright year to 2013.
H.J. Lu [Wed, 2 Jan 2013 17:06:32 +0000 (17:06 +0000)]
Rotate binutils ChangeLog for 2013
Tom Tromey [Wed, 2 Jan 2013 15:00:34 +0000 (15:00 +0000)]
* gdb.texinfo (GDB/MI Output Records): Update menu.
(GDB/MI Breakpoint Information): New node.
(GDB/MI Breakpoint Commands) <-break-info>: Link to new node.
<-break-insert>: Likewise.
Tom Tromey [Wed, 2 Jan 2013 14:58:15 +0000 (14:58 +0000)]
* config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
* configure.ac: Check for Mach-O support in BFD. Update
CONFIG_OBS.
* configure: Rebuild.
Yufeng Zhang [Wed, 2 Jan 2013 14:56:30 +0000 (14:56 +0000)]
gas/
2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
and "cortex57".
Tom Tromey [Wed, 2 Jan 2013 14:54:17 +0000 (14:54 +0000)]
* acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
* configure.ac: Use GDB_AC_CHECK_BFD.
* configure: Rebuild.
Nick Clifton [Wed, 2 Jan 2013 13:38:57 +0000 (13:38 +0000)]
PR gas/14987
* gas/arm/neon-ldst-es.s: Add whitespace test.
* gas/arm/neon-ldst-es.d: Update expected disassembly.
* config/tc-arm.c (parse_address_main): Skip whitespace before a
closing bracket.
Nick Clifton [Wed, 2 Jan 2013 13:20:50 +0000 (13:20 +0000)]
* arm.h (ARMV7PEMAGIC): Define.
(ARMBADMAG): Update.
Nick Clifton [Wed, 2 Jan 2013 13:13:36 +0000 (13:13 +0000)]
opcodes/ChangeLog
* cr16-dis.c (match_opcode,make_instruction: Remove static declaration.
(dwordU,wordU): Moved typedefs to opcode/cr16.h
(cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'
bfd/Changelog
* config.bfd (cr16*-*-uclinux*): New target support.
include/opcode/ChangeLog
* cr16.h (dwordU,wordU): Moved typedefs from cr16-dis.c
(make_instruction,match_opcode): Added function prototypes.
(cr16_words,cr16_allWords,cr16_currInsn): Declare as extern.
Maxim Kuvyrkov [Wed, 2 Jan 2013 04:49:56 +0000 (04:49 +0000)]
* MAINTAINERS: Update my email.
gdbadmin [Wed, 2 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 1 Jan 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Joel Brobecker [Tue, 1 Jan 2013 11:04:34 +0000 (11:04 +0000)]
ppc-aix: .bss relocation problem when overlapping with the .data section
Add missing ChangeLog entry.
Joel Brobecker [Tue, 1 Jan 2013 08:37:20 +0000 (08:37 +0000)]
ppc-aix: .bss relocation problem when overlapping with the .data section
It has been observed that the GNU linker can sometimes improperly
set the address of the .bss section in such a way that it overlaps
with the end of the .data section. This causes problems in GDB
when trying to print the value of variables located in that section,
because the loader appears to be gracefully but silently adjusting
the address of the .bss section to avoid the overlap, thus causing
a mismatch between the address where GDB thinks it is, vs the address
where it actually lives.
This patch works around the problem while it a fix in the linker
is being explored.
gdb/ChangeLog:
* rs6000-nat.c (bss_data_overlap): New function.
(vmap_symtab): Use it to adjust the .bss section's offset.
Joel Brobecker [Tue, 1 Jan 2013 07:38:02 +0000 (07:38 +0000)]
Add make_cleanup_free_command_lines declaration "extern".
gdb/ChangeLog:
* cli/cli-script.h (make_cleanup_free_command_lines): Make extern.
Joel Brobecker [Tue, 1 Jan 2013 06:41:43 +0000 (06:41 +0000)]
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Joel Brobecker [Tue, 1 Jan 2013 06:33:28 +0000 (06:33 +0000)]
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Joel Brobecker [Tue, 1 Jan 2013 05:45:22 +0000 (05:45 +0000)]
Update copyright year in gdb/gdbserver/gdbreplay version output.
gdb/ChangeLog:
* top.c (print_gdb_version): Update copyright year.
gdb/gdbserver/ChangeLog:
* gdbreplay.c (gdbreplay_version): Update copyright year.
* server.c (gdbserver_version): Likewise.
Joel Brobecker [Tue, 1 Jan 2013 05:30:40 +0000 (05:30 +0000)]
Rotate gdb's ChangeLog file.
gdb:
* ChangeLog-2012: Renamed from ChangeLog:
* ChangeLog: New file.
* config/djgpp/fnchange.lst: Add entry for ChangeLog-2012.
gdbadmin [Tue, 1 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 31 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
Yao Qi [Mon, 31 Dec 2012 03:00:11 +0000 (03:00 +0000)]
gdb/doc/
* gdb.texinfo (Remote Non-Stop): Move paragraphs to ...
(Packets): Move "vStopped" packet to ...
(Notification Packets): ... here. Describe the components
of notification. Add a table of supported notifications.
Add an example on the process of he async notification.
gdbadmin [Mon, 31 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 30 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
Hans-Peter Nilsson [Sun, 30 Dec 2012 20:15:07 +0000 (20:15 +0000)]
* ld-scripts/pr14962.d: Don't run for mmix-knuth-mmixware. Add
comment punctuation.
gdbadmin [Sun, 30 Dec 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 29 Dec 2012 23:00:06 +0000 (23:00 +0000)]
daily update
gdbadmin [Sat, 29 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 28 Dec 2012 23:00:06 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Fri, 28 Dec 2012 09:05:40 +0000 (09:05 +0000)]
gdb/
* symtab.c (find_line_symtab): Call symtab_to_fullname instead of
accessing FULLNAME directly.
gdbadmin [Fri, 28 Dec 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 27 Dec 2012 23:00:04 +0000 (23:00 +0000)]
daily update
gdbadmin [Thu, 27 Dec 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 26 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Wed, 26 Dec 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 25 Dec 2012 23:00:06 +0000 (23:00 +0000)]
daily update
Sergio Durigan Junior [Tue, 25 Dec 2012 17:27:49 +0000 (17:27 +0000)]
2012-12-25 Sergio Durigan Junior <sergiodj@redhat.com>
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Fix typo.
Jan Kratochvil [Tue, 25 Dec 2012 08:03:33 +0000 (08:03 +0000)]
gdb/
* ada-lang.c (is_known_support_routine): New variable fullname. Use
access call to verify the symtab_to_fullname result.
* breakpoint.c (print_breakpoint_location, update_static_tracepoint):
Remove NULL check of symtab_to_fullname result.
* cli/cli-cmds.c (edit_command): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* python/py-symtab.c (stpy_fullname): Likewise.
* source.c (symtab_to_fullname): Update function comment. Rename
variable r to fd, move it to inner block. Always provide non-NULL
result.
(print_source_lines_base): Remove NULL check of symtab_to_fullname
result.
* stack.c (print_frame): Likewise.
* symtab.c (iterate_over_some_symtabs, find_line_symtab, sources_info):
Likewise.
* tracepoint.c (print_one_static_tracepoint_marker): Likewise.
gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
present.
(GDB/MI File Commands) (-file-list-exec-source-files): Make the
fullname output always present.
gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: New file.
gdbadmin [Tue, 25 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 24 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Mon, 24 Dec 2012 19:42:16 +0000 (19:42 +0000)]
gdb/
Code cleanup.
* dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for
NULL.
* linespec.c (add_sal_to_sals): Likewise.
* psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL.
* stack.c (print_frame): Do not check symtab->FILENAME for NULL.
* symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL.
* symtab.h (struct symtab): Add comment it is never NULL for filename.
* tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME
for NULL.
* tui/tui-source.c (tui_set_source_content): Likewise.
Jan Kratochvil [Mon, 24 Dec 2012 19:40:05 +0000 (19:40 +0000)]
gdb/
* breakpoint.c (breakpoint_re_set): Remove the skip_re_set call.
* infrun.c (handle_inferior_event): Rename the called function to
function_name_is_marked_for_skip, pass it TMP_SAL.
* skip.c (struct skiplist_entry): Update function_name comment. Remove
fields pc, gdbarch and pending.
(skip_function_pc): Rename this forward declaration to ...
(skip_function): ... here.
(skip_file_command): Remove variable pending and its use, remove
initialization of E fields pending and gdbarch. Do not use SYMTAB
filename, use the specified one.
(skip_function_command): Remove variable func_pc, do not set it.
Update the caller of skip_function. Replace decode_line_1 call by
a lookup_symbol call. Remove variables orig_arg, decode_exception and
sals. Update the caller of skip_function.
(skip_info): Remove variable address_width and its use. Do not print
address (PC). Renumber column 5 to 4.
(skip_function_pc): Rename to ...
(skip_function): ... here and remove its parameters pc, arch and
pending. Update the function comment and no longer use those
parameters.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, update function comment
just to a skip.h reference, replace pc parameter by function_name and
function_sal. No longer use E field pending and pc. Remove variables
searched_for_sal, sal and filename. Call compare_filenames_for_search
instead of just strcmp.
(skip_re_set): Remove the function.
* skip.h (struct symtab_and_line): New declaration.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, replace pc parameter by
function_name and function_sal, update the function comment.
gdb/testsuite/
* gdb.base/skip-solib.exp (info skip with pending file): Update the
expected output.
(info skip with pending file): Remove.
(ignoring function in solib, info skip for function multiply): Update
the expected output.
* gdb.base/skip.ex (skip (main), skip function baz, info skip)
(info skip (delete 1), info skip after disabling all)
(info skip after enabling all, info skip after disabling 4 2-3)
(info skip after enabling 2-3, info skip 2-3)
(info skip after deleting 2 3): Update the expected output.
* gdb.linespec/base/two/thefile.cc (n): New variable v, split the
statement to its initialization and return.
* gdb.linespec/skip-two.exp: New file.
Mike Frysinger [Mon, 24 Dec 2012 02:47:51 +0000 (02:47 +0000)]
bfd: also enable x86_64pei_vec for 64bit i386-linux targets
We enable x86_64pei_vec for x86_64-linux targets, so we should list this
in the 64bit i386-linux vec section. This is useful for when we want to
build 64bit EFI code on an i386 system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdbadmin [Mon, 24 Dec 2012 00:00:36 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 23 Dec 2012 23:00:04 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 23 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 22 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
Pierre Muller [Sat, 22 Dec 2012 18:53:36 +0000 (18:53 +0000)]
* ui-file.h (tee_file_new): Add extern modifier in header declaration.
Pierre Muller [Sat, 22 Dec 2012 17:51:11 +0000 (17:51 +0000)]
* gdbint.texinfo (Function prototypes): Require use of "extern"
modifier for function prototypes in headers.
gdbadmin [Sat, 22 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 21 Dec 2012 23:00:06 +0000 (23:00 +0000)]
daily update
H.J. Lu [Fri, 21 Dec 2012 20:54:59 +0000 (20:54 +0000)]
Check R_X86_64_standard for unrecognized relocation
* elf64-x86-64.c (elf_x86_64_relocate_section): Check
R_X86_64_standard instead of R_X86_64_max for unrecognized
relocation.
H.J. Lu [Fri, 21 Dec 2012 18:15:22 +0000 (18:15 +0000)]
Properly adjust h->plt.refcount
bfd/
PR ld/14980
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): Properly
adjust h->plt.refcount.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol): Likewise.
ld/testsuite/
PR ld/14980
* ld-ifunc/ifunc-14c.s: New file.
* ld-ifunc/ifunc-14e-i386.d: Likewise.
* ld-ifunc/ifunc-14e-x86-64.d: Likewise.
* ld-ifunc/ifunc-14f-i386.d: Likewise.
* ld-ifunc/ifunc-14f-x86-64.d: Likewise.
Ian Lance Taylor [Fri, 21 Dec 2012 06:24:31 +0000 (06:24 +0000)]
* layout.cc (Layout::special_ordering_of_input_section): New
function.
(Layout::layout): If input section requires special ordering, must
sort input sections.
(Layout::make_output_section): May sort .text input sections.
(Layout::is_section_name_prefix_grouped): Remove.
* layout.h (class Layout): Declare
special_ordering_of_input_section. Don't declare
is_section_name_prefix_grouped.
* output.cc (Output_section::add_input_section): Revert last
change.
(Output_section::Input_section_sort::match_file_name): Don't crash
if called on output section data.
(Output_section::Input_section_sort_compare): Sort based on
special ordering.
(Output_section::Input_section_sort_section_order_index_compare):
Revert last patch.
(Output_section::sort_attached_input_sections): Likewise.
gdbadmin [Fri, 21 Dec 2012 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 20 Dec 2012 23:00:05 +0000 (23:00 +0000)]
daily update
Jan-Benedict Glaw [Thu, 20 Dec 2012 21:59:17 +0000 (21:59 +0000)]
* Makefile.def (install-target-libgo): Depend on
install-target-libatomic. Merged from GCC repo.
* Makefile.in: Regenerate.
Richard Earnshaw [Thu, 20 Dec 2012 16:31:15 +0000 (16:31 +0000)]
Fix commit date in previous commit.
Richard Earnshaw [Thu, 20 Dec 2012 16:19:53 +0000 (16:19 +0000)]
2012-12-20 Greta Yorsh <Greta.Yorsh@arm.com>
* config/tc-arm.c (rfefa,rfeea,rfeed): Fix encoding.
(rfe,srs,srsea,srsfa,srsed,srsfd): Add missing mnemonics.
* gas/arm/srs-t2.s: Add tests for missing srs modes.
* gas/arm/srs-t2.l: Update expected output.
* gas/arm/srs-arm.s: Add tests for missing srs modes.
* gas/arm/srs-arm.l: Update expected output.
* gas/arm/archv6.s: Add tests for missing rfe modes.
* gas/arm/archv6.d: Update expected output.
Tom Tromey [Thu, 20 Dec 2012 15:30:25 +0000 (15:30 +0000)]
* serial.c (deprecated_serial_fd): Remove.
* serial.h (deprecated_serial_fd): Remove.
Doug Evans [Thu, 20 Dec 2012 05:05:49 +0000 (05:05 +0000)]
* gdb.base/maint.exp: Handle testing with .gdb_index.
Joel Brobecker [Thu, 20 Dec 2012 05:01:54 +0000 (05:01 +0000)]
Revert GPL version change in sim/bfin/aclocal.m4
sim/bfin/ChangeLog:
* aclocal.m4: Revert the previous change changing
the license from GPL v2 or later to GPL v3 or later
(this file was generated).
Joel Brobecker [Thu, 20 Dec 2012 04:18:53 +0000 (04:18 +0000)]
Revert GPL version change in linux-fixed-code.s.
sim/bfin/ChangeLog:
* linux-fixed-code.s: Revert the previous change changing
the license from GPL v2 or later to GPL v3 or later.
Yao Qi [Thu, 20 Dec 2012 01:07:04 +0000 (01:07 +0000)]
gdb/
2012-12-20 Yao Qi <yao@codesourcery.com>
* maint.c (_initialize_maint_cmds): Move code ...
* symmisc.c (_initialize_symmisc): ... to here.
(maintenance_print_msymbols): Make it static.
(maintenance_print_objfiles): Likewise.
(maintenance_print_symbols): Likewise.
(maintenance_info_symtabs): Likewise.
* symtab.h (maintenance_print_msymbols): Remove declaration.
(maintenance_print_objfiles, maintenance_print_symbols): Likewise.
(maintenance_info_symtabs): Likewise.
Yao Qi [Thu, 20 Dec 2012 00:58:14 +0000 (00:58 +0000)]
gdb/
2012-12-20 Yao Qi <yao@codesourcery.com>
* maint.c (_initialize_maint_cmds): Move code to ...
* psymtab.c (_initialize_psymtab): ... here. New.
Include "gdbcmd.h".
(maintenance_print_psymbols): Make it static.
(maintenance_info_psymtabs, maintenance_check_symtabs): Likewise.
* symtab.h (maintenance_print_psymbols): Remove declaration.
(maintenance_check_symtabs, maintenance_info_psymtabs): Likewise.
gdbadmin [Thu, 20 Dec 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 19 Dec 2012 23:00:04 +0000 (23:00 +0000)]
daily update