package/iputils: re-enable traceroute6

Bump to s20190515 removed traceroute6 build (it's not built by default
since this version in upstream). Reenable it again.

Fixes: 9ffcd9279e ("package/iputils: bump to version s20190515")
This requires fix similar to one in 0003-meson.build-fix-build-with-NLS.patch [1]

traceroute6 is in /usr/sbin, so no need to handle busybox problem
(6e18892733 "package/iputils: move binaries to the location also used by
Busybox").

[1] http://autobuild.buildroot.org/results/0a8a3efe734ac7fb3a68ba505277681857dc0a3d

Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/davfs2: bump to version 1.5.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: add libidn2 support

libidn2 is preferred over libidn, see src/util.c:
 #if defined(HAVE_LIBIDN2)
 #include <idn2.h>
 #elif defined(HAVE_IDN)
 #include <idna.h>
 #endif

So select libidn2 if libidn is not enabled

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: bump to version 2.34

- Remove patches already applied upstream.
- Update file hash.
- Add an option to select the new "hardlink" command (off by default)
- hardlink uses libpcre2-8 if pcre2 is detected at config time so add a
  build dependency on pcre2, if it's selected.
- Change selections to reflect that libblkid now does not depend on
  libuuid anymore

Full release notes available at

  https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.34/v2.34-ReleaseNotes

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openssh: bump to version 8.0p1

Also remove upstream patches.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libressl: bump to version 2.9.2

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: fix build with ubus and NLS

Fixes:
 - http://autobuild.buildroot.org/results/c0b27754b7ede024c095bdf0b3616e6f6be48c6d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uboot-tools: fix legal-info

Add hash for LICENSE file

Fixes:

$: make uboot-tools-legal-info
 >>> uboot-tools 2019.04 Collecting legal info
 ERROR: No hash found for Licenses/gpl-2.0.txt

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uboot-tools: bump to version 2019.04

- Bump to version 2019.04.
 - remove the patch that have been upstreamed.
 - Refresh patches for the new version.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pycairo: new package

A Python module providing bindings for the cairo graphics library.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-daemon: add hashes for license files

Fixes:

$: make python-daemon-legal-info
 >>> python-daemon 2.2.3 Collecting legal info
 ERROR: No hash found for LICENSE.ASF-2
 ERROR: No hash found for LICENSE.GPL-3

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-daemon: bump to version 2.2.3

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: remove non-conventional prefix/suffix from tarball-fetched packages

While most projects name their tarball <name>-<version>, where
<version> is just the version number, some other projects add some
prefix and/or suffix to their version number.

In Buildroot, we currently encode the full version (with its
prefix/suffix) in the <pkg>_VERSION variable. However, that doesn't
work well to match version numbers with the release-monitoring.org
website, which filters such prefixes/suffixes.

This commit therefore removes the prefix/suffix from tarball-fetched
packages. The name of the files being downloaded does not change.

Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pseudo: remove package

pseudo is not used and fails to build without xattr so remove it

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-txdbus: new package

Implements a native Python implementation of DBus for Twisted.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-tinyrpc: new package

A protocol neutral RPC library that supports JSON-RPC and zmq.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-iptables: new package

This package provides Python bindings for iptables.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-colorama: new package

This package provides a simple cross-platform API for printing
colored terminal text.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/opencv: fix build due to gcc bug 68485

With Microblaze Gcc version <= 9.x the build fails due to gcc bug 68485:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485. The bug show up when
building opencv with optimization but not when building with -O0. To
work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_68458=y, we force using
-O0.

Fixes:
 - http://autobuild.buildroot.org/results/17fff0f312ebd520ba3341976ba56fd8c85ee376

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_mkfontdir: remove package

app_mkfontscale now includes the mkfontdir script:
https://lists.x.org/archives/xorg-announce/2019-March/002988.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xfont_font-*: remove host-xapp_mkfontdir dependency

x11r7/xapp_mkfontscale as of version 1.2.1 includes the mkfontdir
script. This patch removes the now unneeded dependency to host-xapp_
mkfontdir in preparation for the removal of the xapp_mkfontdir package.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_mkfontscale: bump version to 1.2.1

Updated license hash after upstream commit
https://gitlab.freedesktop.org/xorg/app/mkfontscale/commit/8609ad731b9c9c670a815c915055ae416d2396d8

Release notes:
https://lists.x.org/archives/xorg-announce/2019-March/002988.html

This version bump "now includes the mkfontdir script previously
distributed separately for compatibility with older X11 versions."

Removing the buildroot package host-xapp_mkfontdir will be done by
subsequent patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xserver_xorg-server: bump version to 1.20.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/at91bootstrap3: bump to version 3.8.12

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/Config.in.nds32: force syntax colouring to kconfig

It is too sad when an editor picks up the wrong syntax...

Like was done in e837837791 for all the other archs, force
syntax to kconfig for nds32 too.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Nylon Chen <nylon7@andestech.com>
Reviewed-by:Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: allow building as individual binaries

We add configuration option BR2_PACKAGE_COREUTILS_INDIVIDUAL_BINARIES
so that coreutils can be built and installed as individual binaries.
It can be used if the target file system doesn't support symlinks or
symlinks are undesirable.

The approach is modelled after Busybox's similarly named configuration
option.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[Thomas: adjust to previous preparation commits.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: split COREUTILS_CLEANUP and use better names

The COREUTILS_CLEANUP macro naming is a bit weird. In addition, it
does two unrelated things, and the introduction of support for
building coreutils as individual binaries will require splitting it
up.

So let's do this split as a preparation commit, and use better names
for both resulting macros.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/coreutils: rename COREUTILS_CLEANUP_BIN to a more sensible name

COREUTILS_CLEANUP_BIN doesn't mean much, what it really does is fixing
the location of binaries, so let's rename to a more sensible name.

This is done in preparation to the introduction of support for
building coreutils as individual binaries.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luasyslog: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cups: bump to version 2.2.11 and add gzip fix

This patch bumps cups to version 2.2.11 so that an upstream fix will
apply cleanly.

The upstream fix corrects a build failure when GZIP is set in the
build environment, as it is for buildroot's reproducible builds, as
shown below:

gzip: /bin/gzip.gz: Permission denied
gzip: /bin/gzip.gz: Permission denied
Makefile:114: recipe for target 'install-data' failed

The patch will be included upstream in version 2.2.12.

Fixes:
 - http://autobuild.buildroot.net/results/c4e0f6a3c79c9cb083a08f811b7d4838efef50f9/

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/download/git: fix formatting of error message

'.' should be at the end of the sentence, not the beginning of a new
line.

Signed-off-by: John Keeping <john@metanate.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/haproxy: re-enable package on microblaze

With Microblaze ccc version < 8.x and optimization, the build fails
with;

  'internal compiler error: in do_output_reload, at reload1.c:7978'

This is due to gcc bug 90620:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620. To avoid this, the
haproxy package has a !BR2_microblaze dependency. However, this gcc
bug 90620 only triggers when optimization is enabled, so we can work
around the issue by passing -O0, which is what we do in other
Buildroot packages to work around similar Microblaze issues.

So, this commit passes -O0 when BR2_TOOLCHAIN_HAS_GCC_BUG_90620, and
re-enables haproxy on Microblaze.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_90620

GCC fails building the haproxy package for the Microblaze architecture:

  http://autobuild.buildroot.org/results/64706f96db793777de9d3ec63b0a47d776cf33fd/

The gcc bug was originally reported gpsd:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90620

This gcc bug no longer appeared with gcc 8.x but reappeared in gcc
9.x, so we introduce a config symbol so that packages can work it
around by disabling optimization.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashbench: remove old toolchain microblaze & sh2a workaround

The old binary Microblaze and Sh2a toolchains were affected by Glibc
Bug 1228: https://sourceware.org/bugzilla/show_bug.cgi?id=1228 that
has been fixed in 2005, so let's remove actual work around:
'FLASHBENCH_CFLAGS += -std=gnu99' for both BR2_microblaze and BR2_sh2a
and remove local FLASHBENCH_CFLAGS in favour of TARGET_CFLAGS.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sqlite: work around build timeout on Microblaze

With Microblaze Gcc version 4.9 build hangs due to a bug discovered
for Gcc 4.9 only. Since Gcc 4.9 is not maintaned anymore it doesn't
make sense to report this bug in Gcc bugzilla and use
BR2_TOOLCHAIN_HAS_GCC_BUG_. So let's check if we're building for
Microblaze with Gcc version < 5.x and work around the bug forcing the
use of -O0.

To reproduce this bug build with following defconfig:
'
BR2_microblazeel=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_2=y
BR2_KERNEL_HEADERS_5_0=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_GCC_VERSION_4_9_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_TOOLCHAIN_BUILDROOT_FORTRAN=y
BR2_GCC_ENABLE_LTO=y
BR2_PACKAGE_SQLITE=y
'

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tvheadend: re-enable package on microblaze

Package tvheadend has been disabled on microblaze with this commit:
https://git.buildroot.net/buildroot/commit/?id=e1a59357e4dfe8fe9c9119d4b2bc9e4ec36eb3d0
but commit log says that build failure is due to "some assertion
failure in binutils", that is true. But those assertion failures in
binutils are caused by package's Makefile itself that has been fixed by
previous patch. So re-enable package for microblaze.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tvheadend: fix PIE build failures

Package tvheadend builds using '-pie' linker flag in any case. This
leads to linking failure if toolchain doesn't support 'pie'.

Add patch to fix tvheadend's Makefile bug where '-pie' flag is hardcoded
making it depend on '--disable-pie' as compiler's flags already are
treated.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/brotli: properly pass TARGET_CFLAGS in Microblaze workaround

In commit 39dde1ffb6a7111c2fa2b340c940e4d3e685aa29 ("package/brotli:
work around gcc bug 68485"), a mistake was made: when
BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y, we're only passing -O0 as CFLAGS,
completely ignoring TARGET_CFLAGS, which is not good.

This commit fixes that by introducing a BROTLI_CFLAGS variable,
initially defined to TARGET_CFLAGS, and to which we add -O0 when
BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: run mdev in daemon mode

- Enable the mdev daemon mode in Busybox default config
- Update the S10mdev init script to use the daemon mode

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: convert S10mdev to the canonical init script format

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: bump version to 1.31.0

Remove 0003-libbb-mark-scripted_main-as-externally-visible.patch
as it was committed upstream in 3193cb56d6

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/psplash: add license file details

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libidn2: bump to version 2.2.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: drop wchar dependency on IDN option

wchar dependency on IDN option has been added with commit
126a2e75f5948b30f842862906fca8ed99ffff26 because of libintl

However libintl dependency has been dropped with commit
bbcbed1829057121f9f9459f62f913626206e823 so remove unneeded wchar
dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/qemu_riscv32_virt: update to 5.1 kernel

Update the 32-bit defconfig to use the latest kernel. This requires a
patch to revert a ABI to ensure that the glibc port continues to work.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/qemu_riscv64_virt: update to 5.1 kernel

Update the 64-bit defconfig to use the latest kernel.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gzip: bump to version 1.10

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/haveged: fix legal-info

Add hash for COPYING file

Fixes:

$: make haveged-legal-info
 >>> haveged 1.9.4 Collecting legal info
 ERROR: No hash found for COPYING

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/haveged: bump to version 1.9.4

See https://github.com/jirka-h/haveged/releases/tag/1.9.4

Also change the site location, upstream release
mechanism has switched to using github.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/mx51evk: Bump kernel version

Bump the kernel version to 5.1.10.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-headers: drop support for 5.x headers

The 5.0.x series is now EOL and vulnerable to the "TCP SACK PANIC" issue.
Drop support for it in linux-headers.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

amarula_vyasa_rk3288_defconfig: use same-as-kernel option for kernel headers

Instead of the to-be-removed 5.0 option.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: add legacy entry for 4.20.x headers

Commit b3bba8e4254 (package/linux-headers: drop support 4.20 headers)
removed the option for 4.20.x kernel headers, but forgot to add a legacy
option.  Add that now.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.1.x series

Includes fixes for the "TCP SACK PANIC" vulnerability:

https://access.redhat.com/security/vulnerabilities/tcpsack

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: remove non-conventional prefix/suffix from github-fetched packages

On Github, a large number of projects name their tag
<some-prefix>-0.3-<some-suffix> (i.e release-3.0, poco-0.1-release,
etc.). In fact majority of the cased adressed in this commit concerns
prefixes.

In most packages, we encode those prefix/suffix in the <pkg>_VERSION
variable.

The problem with this approach is that when used in conjunction with
release-monitoring.org, it doesn't work very well, because
release-monitoring.org has the concept of "version prefix/suffix" and
using that they drop the prefix/suffix to really get the version. For
example on https://release-monitoring.org/project/5418/ the latest
release of "poco" is "1.8.1", not "poco-1.8.1-release".

Therefore, a number of packages in Buildroot have a version that
doesn't match with release-monitoring.org.

Since really the version number of 1.8.1, is makes sense to update our
packages to drop these prefixes/suffixes.

This commit addreses the case of github-fetched packages with
non-conventional prefixes/suffixes.

Note that these changes modify the name of the files stored in DL_DIR,
which means that this will force a re-download of those package source
code for all users, and requires a change to their .hash file.

Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package: remove 'v' prefix from github-fetched packages

On Github, a large number of projects name their tag vXYZ (i.e v3.0,
v0.1, etc.). In some packages we do:

 <pkg>_VERSION = v0.3
 <pkg>_SITE = $(call github foo,bar,$(<pkg>_VERSION))

And in some other packages we do:

 <pkg>_VERSION = 0.3
 <pkg>_SITE = $(call github foo,bar,v$(<pkg>_VERSION))

I.e in one case we consider the version to be v0.3, in the other case
we consider 0.3 to be the version.

The problem with v0.3 is that when used in conjunction with
release-monitoring.org, it doesn't work very well, because
release-monitoring.org has the concept of "version prefix" and using
that they drop the "v" prefix for the version.

Therefore, a number of packages in Buildroot have a version that
doesn't match with release-monitoring.org because Buildroot has 'v0.3'
and release-monitoring.org has '0.3'.

Since really the version number of 0.3, is makes sense to update our
packages to drop this 'v'.

This commit only addresses the (common) case of github packages where
the prefix is simply 'v'. Other cases will be handled by separate
commits. Also, there are a few cases that couldn't be handled
mechanically that aren't covered by this commit.

Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
[Arnout: don't change flatbuffers, json-for-modern-cpp, libpagekite,
 python-scapy3k, softether]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lua-cqueues: fix build failure due to gcc bug 68485

The lua-cqueues package exhibits gcc bug 68485 when built for the
Microblaze architecture with optimization enabled, which causes a
build failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y.

Fixes:

  http://autobuild.buildroot.net/results/c35964dda4e2328c2c1f3b2388677b68c5ed461e/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libspatialindex: use BR2_TOOLCHAIN_HAS_BUG_68485 option

For consistency with the rest of packages let's use the common
BR2_TOOLCHAIN_HAS_BUG_68485 option instead of !BR2_microblaze
condition with the comment on top of it.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flann: re-enable package on microblaze

With Microblaze gcc version <= 9.x, the build of flannel fails due to
gcc bug 68485: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485.

To avoid this, the flann package has a !BR2_microblaze
dependency. However, gcc bug 68485 only triggers when optimization is
enabled, so we can work around the issue by passing -O0, which is what
we do in other Buildroot packages to work around this bug.

So, this commit passes -O0 when BR2_TOOLCHAIN_HAS_GCC_BUG_68485, and
re-enables flann on Microblaze.

Note that the comment was talking about gcc bug 69401, but this gcc
bug is a duplicate of 68485. Since all Buildroot packages now use the
reference to gcc bug 68485 and the option is named
BR2_TOOLCHAIN_HAS_GCC_BUG_68485, we use this naming as well for flann.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gpsd: use BR2_TOOLCHAIN_HAS_GCC_BUG_68485 option

The workaround for gcc's ICE works ok, but it's used if
BR2_microblaze=y with a local comment. Let's use
BR2_TOOLCHAIN_HAS_GCC_BUG_68485 instead to avoid repeating ICE bug
comment for every package affected by it.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kmsxx: work around gcc bug 85180

With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building kmsxx with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.

Fixes:
http://autobuild.buildroot.net/results/360/360f19645e76314048c75424bb4b64da91742f47/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/snort: work around gcc bug 85180

With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building snort with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.

Fixes:
http://autobuild.buildroot.net/results/d24/d2412710f6cfbfc069e7858e507e28555baafa3e/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bullet: re-enable package when gcc bug 85180 is present

With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. This
package has been excluded from building on Microblaze due to this.

To be consistent with how we deal with this issue in other packages,
we re-enable the package and instead work around the issue by building
with -O0, since gcc bug 85180 manifests itself only when optimization
is enabled.

To achieve this pass -O0 in CMAKE_CXX_FLAGS and remove 'depends on
!BR2_microblaze' and its comment if not available from Config.in.

Note that the comment was talking about gcc bug 68476, but this gcc
bug is a duplicate of 85180. Since all Buildroot packages now use the
reference to gcc bug 85180 and the option is named
BR2_TOOLCHAIN_HAS_GCC_BUG_85180, we use this naming as well for
bullet.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stress-ng: re-enable package on microblaze

Package stress-ng has a dependency to keyutils, but keyutils has been
re-enabled with previous patch. Re-enable package by removing 'depends
on !BR_microblaze' from stress-ng Config.in.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ecryptfs-utils: re-enable package on microblaze

ecryptfs-utils was not available on Microblaze due to its dependency
on keyutils, which itself was not available on Microblaze due to build
issues. However, now that keyutils has been re-enabled on Microblaze,
we can also re-enable ecryptfs-utils on this architecture.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/solidrun_clearfog_gt_8k: new defconfig

Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.

The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).

Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dnsmasq: bump version to 2.80

Also automatically enable UBus support when UBus itself is enabled.

Signed-off-by: Jan Willem Janssen <j.w.janssen@lxtreme.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: bump ARC tools to arc-2019.03 release

This commit finally bumps ARC tools to the most recent arc-2019.03 release version.

ARC GNU tools of version arc-2019.03 bring some quite significant changes like:
 * Binutils v2.32.51.20190308 with additional ARC patches
 * GCC 8.3.1 with additional ARC patches
 * glibc 2.29 with additional ARC patches

More information on this release could be found here:
 https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2019.03-release

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/localedef: compile against glibc-2.29

In glibc 2.27 the following change occurred:
"Statically compiled applications attempting to load locales compiled
for the GNU C Library version 2.27 will fail and fall back to the
builtin C/POSIX locale."

This impacts us since upstream buildroot uses a localdef built against
an older eglibc release, as reported at [0].

This is a combination of my patch to move to glibc and Peter Seiderer's
patch to avoid building all of glibc just for localedef.

 [0] https://bugs.busybox.net/show_bug.cgi?id=11096

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[localedef build & fixups:]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: share the tarball with the glibc package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/logrotate: fix legal-info

Add hash for COPYING file

Fixes:

$: make logrotate-legal-info
 >>> logrotate 3.15.0 Collecting legal info
 ERROR: No hash found for COPYING

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/logrotate: bump to version 3.15.0

See https://github.com/logrotate/logrotate/releases/tag/3.15.0

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kmod: bump version to 26

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: fix musl build

Retrieve upstream patch that check availability of strtoull_l before
using it

Fixes:
 - http://autobuild.buildroot.org/results/18f9eecae551c2db6544c7432f23e541bae0d8b9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/keyutils: re-enable package on microblaze

keyutils has a !BR2_microblaze introduced by commit:
https://git.buildroot.net/buildroot/commit/?id=20e0926f4469a3486629cfd6fa7f449f2b659aa8
that points 2 possible build failures:
- "warning: dereferencing type-punned pointer will break strict-aliasing
  rules" treated as an error. But this warning is not treated as an
  error anymore since -Werror flag is not used after last version bumps
- glibc does not export the resolver symbols resulting in linking
  failure. But glibc used was version 2.3.6 that is not used anymore
  since. It's been released in 2005.

So re-enable package for Microblaze by removing 'depends on
!BR2_microblaze' from keyutils Config.in

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: update Arm AArch64-BE toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: update Arm AArch64 toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_aarch64_virt_defconfig.

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: update Arm ARM toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_arm_vexpress_defconfig.

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: fix IPUTILS_PERMISSIONS

The IPUTILS_PERMISSIONS variable was wrong, because iputils installs
its programs in /usr/bin, not in /bin. It probably was only tested
with the merged /usr option enabled.

This commit fixes IPUTILS_PERMISSIONS, taking into account the change
done in 6e18892733 "package/iputils: move binaries to the location also
used by Busybox":

 - arping is moved by the post-install target hook to /usr/sbin

 - clockdiff is installed by iputils in /usr/bin

 - ping is moved by the post-install target hook to /bin, which makes
   the previously incorrect path in IPUTILS_PERMISSIONS now correct

Fixes:

  http://autobuild.buildroot.net/results/fe378bca29c86a681ba9ad40386cb89248195c50/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: move binaries to the location also used by Busybox

iputils installs several programs that are also implemented as applets
in Busybox. Two of these (arping and tftpd) are installed by iputils
in /bin, while Busybox installs them in /usr/sbin, causing both to be
present if both iputils and busybox are enabled.

This commit moves the binaries installed by iputils to /usr/sbin, so
that only these are installed (Busybox will be installed later thanks
to its optional dependency on iputils, but it will not override the
tools installed by iputils).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: add option to enable systemd-journal-remote

systemd-journal-remote was added in systemd v211, so add a new option
to enable or disable it.

Signed-off-by: Yi Zheng <goodmenzy@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: remove bindir prefix from gio-2.0.pc

Apply LIBGLIB2_REMOVE_BINDIR_PREFIX_FROM_PC_FILE to gio-2.0.pc so
${bindir} prefix is also removed for gbus-codegen otherwise build of
packages using this binary will fail if gbus-codegen is not installed on
host

Fixes:
 - http://autobuild.buildroot.org/results/5c0e4f3d33e01198688d58388aabe159bd005234

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mmevk: new defconfig

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongoose: bump to version 6.15

See https://github.com/cesanta/mongoose/releases/tag/6.15

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: add upstream security fix for CVE-2019-10160

Fixes CVE-2019-10160: urlsplit does not handle NFKC normalization (2nd fix)

While the fix for CVE-2019-9936 is included in 3.7.3, the followup
regression fixes unfortunatly aren't.

https://bugs.python.org/issue36742

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python: add upstream security fix for CVE-2019-9636

Fixes CVE-2019-9636: urlsplit does not handle NFKC normalization

https://bugs.python.org/issue36216

The fix unfortunately introduced regressions, so also apply the followup
fixes.

https://bugs.python.org/issue36742

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python: add upstream security fix for CVE-2019-9948

Fixes CVE-2019-9948: Unnecessary URL scheme exists to allow file:// reading
file in urllib.

https://bugs.python.org/issue35907

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireguard: bump version to 0.0.20190601

For details of the changes, see the announcement:
https://lists.zx2c4.com/pipermail/wireguard/2019-June/004196.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapro: bump Linux to 5.1.1

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: disable for nds32

There is no support for nds32 in gdb.

Fixes:
  http://autobuild.buildroot.net/results/1a40b1ac5f06c856c2e30dbbb4e485022c438c72

Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsocketcan: add license file details

Add LICENSE file

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsocketcan: bump to version 0.0.11

This includes the following changes:

0ff01ae v0.0.11
b217774 Add configure switch for error logging
15af38a Add compile option to disable error logging
9679a3f Add interface to retrieve link statistics
6f13cef Get link information only from specified interface
f5392c3 Fix parse_rtattr() does not completely initialize
4ea9ec7 Update can_set_ctrlmode() documentation
5938ac7 Update CAN netlink header
0c91940 GNUmakefile: include LICENSE file in tarball
4608afb configure: back to trunk

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/waylandpp: bump version

Removed patch applied upstream:
https://github.com/NilsBrause/waylandpp/commit/242c2c9a188b1a972978fc05dbe70d102bc7c4e1

Bundled pugixml was removed:
https://github.com/NilsBrause/waylandpp/commit/433ce65b681c27d54e1e6b9a602f1c8291aabd54

Use host-pugixml instead and bump to HEAD to include a patch which
fixes a linking error:
https://github.com/NilsBrause/waylandpp/commit/41063c3e1de245bb7ea0c940e7400bd876bee25e

Updated license hash due to upstream commit:
https://github.com/NilsBrause/waylandpp/commit/f255d61ffd982614c0659be1742383dab06710a2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pugixml: enable host build

Needed for host-waylandpp >= 0.2.5
https://github.com/NilsBrause/waylandpp/commit/433ce65b681c27d54e1e6b9a602f1c8291aabd54

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: enable host build

Host version of flatc compiler is needed for Kodi 18.x:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindFlatBuffers.cmake#L51

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: bump version to v1.11.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.{0, 1}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: bump to version 0.51.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus: security bump to version 1.12.16

Fixes the following security issues:

- CVE-2019-12749: Do not attempt to carry out DBUS_COOKIE_SHA1
  authentication for identities that differ from the user running the
  DBusServer.  Previously, a local attacker could manipulate symbolic links
  in their own home directory to bypass authentication and connect to a
  DBusServer with elevated privileges.  The standard system and session
  dbus-daemons in their default configuration were immune to this attack
  because they did not allow DBUS_COOKIE_SHA1, but third-party users of
  DBusServer such as Upstart could be vulnerable.  Thanks to Joe Vennix of
  Apple Information Security.

  For details, see the advisory:
  https://www.openwall.com/lists/oss-security/2019/06/11/2

Also contains a number of other smaller fixes, including fixes for memory
leaks.  For details, see NEWS:

https://gitlab.freedesktop.org/dbus/dbus/blob/dbus-1.12/NEWS

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openblas: Handle new westmere target architecture

Nehalem, the predecessor to westmere, is best match for westmere
architecture in current openblas.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch: Add support for Westmere targets

The westmere line of x86_64 targets lies between nehalem (corei7) and
sandybridge (corei7-avx).  Allowing use of -march=westmere enables use of
AES instruction set on these targets.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>