Luis Machado [Mon, 24 Aug 2015 16:08:20 +0000 (13:08 -0300)]
Make z int
This makes z an int for gdb/testsuite/gdb.opt/inline-markers.c.
gdb/testsuite/ChangeLog:
2015-08-24 Luis Machado <lgustavo@codesourcery.com>
* gdb.opt/inline-markers.c: Make z int.
Luis Machado [Mon, 24 Aug 2015 15:56:15 +0000 (12:56 -0300)]
Make z volatile.
This fixes a typo in gdb/testsuite/gdb.opt/inline-markers.c, making
z a volatile variable.
gdb/testsuite/ChangeLog:
2015-08-24 Luis Machado <lgustavo@codesourcery.com>
* gdb.opt/inline-markers.c: Make z volatile.
Luis Machado [Mon, 24 Aug 2015 15:33:21 +0000 (12:33 -0300)]
Prevent GCC from folding inline test functions
While doing some powerpc Linux tests on a ppc 476 board using GCC 5.2, i
noticed inline-bt.exp, inline-cmds.exp and inline-locals.exp failing.
FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
FAIL: gdb.opt/inline-cmds.exp: continue to marker
FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
FAIL: gdb.opt/inline-cmds.exp: step into finish marker
FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
They failed because the breakpoint supposedly inserted at bar was actually
inserted at noinline.
(gdb) break inline-markers.c:20^M
Breakpoint 2 at 0x1000079c: file gdb/testsuite/gdb.opt/inline-markers.c, line 20.^M
(gdb) continue^M
Continuing.^M
^M
Breakpoint 2, noinline () at gdb/testsuite/gdb.opt/inline-markers.c:35^M
35 inlined_fn (); /* inlined */^M
As we can see, line 20 is really inside bar, not noinline:
18 void bar(void)
19 {
20 x += y; /* set breakpoint 1 here */
21 }
Further investigation shows that this is really due to GCC 5's new
ICF pass (-fipa-icf), now enabled by default at -O2, which folds bar
and marker into noinline, where the call to inlined_fn was inlined.
This breaks the testcase since it expects to stop at specific spots.
I thought about two possible fixes for this issue.
- Disable the ICF pass manually when building the binary (-fno-ipa-icf).
This has the advantage of not having to touch the testcase sources themselves,
but the disadvantage of having to add conditional blocks to test the GCC
version. If we ever change GCC's default, we will have to adjust the
conditional block again to match GCC's behavior.
- Modify the testcase sources to make the identical functions unique.
This solution doesn't touch the testcase itself, but changes the source
code slightly in order to make bar, marker and inlined_fn unique. This
causes GCC's ICF pass to ignore these functions and not fold them into
a common identical function.
I'm good with either of them, but i'm more inclined to go with the second
one.
The attached patch implements this by adding the new global variable z, set
to 0, that gets added in different ways to marker and inlined_fn. Since it
is 0, it doesn't affect any possible value checks that we may wish to do
in the future (we currently only check for values changed by bar).
Ok?
ps: I also noticed GDB doesn't do a great job at stating that the breakpoint
was actually inserted at a different source line than previously requested,
so this sounds like a bug that should be fixed, if it is not just wrong
DWARF information (did not investigate it further).
gdb/testsuite/ChangeLog:
2015-08-24 Luis Machado <lgustavo@codesourcery.com>
* gdb.opt/inline-bt.c: New volatile global z.
* gdb.opt/inline-cmds.c: Likewise.
* gdb.opt/inline-locals.c: Likewise.
* gdb.opt/inline-markers.c: New extern global z.
(marker): Use z.
(inline_fn): Likewise.
Pedro Alves [Mon, 24 Aug 2015 14:29:49 +0000 (15:29 +0100)]
gdb/testsuite/: garbage collect a few references to dead targets
gdb/testsuite/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* config/m32r-stub.exp: Remove file.
* gdb.base/call-ar-st.exp: Remove reference to sparclet.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-strs.exp: Likewise.
* gdb.base/default.exp: Remove references to h8300-*-hms and
*-*-udi*.
* gdb.base/funcargs.exp: Remove reference to sparclet-*-*.
Pedro Alves [Mon, 24 Aug 2015 14:40:26 +0000 (15:40 +0100)]
gdb manual: Remove references to deleted targets
Support for target dbug/picobug/dink32/m32r/mon2000/ppcbug was just
removed, but support for ARM RDI, Sparclet, Sparclite, Z8000, target
r3900, target array, target sds, target op50n and target w89k had
already been removed many years ago. Drop it all in one go.
gdb/doc/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Embedded Processors) <ARM>: Remove references to RDI.
<M32R>: Remove references to M32R/D.
<M68K>: Remove references to target dbug.
<MIPS Embedded>: Remove references to target r3900 and target
array.
<PowerPC Embedded>: Remove references to target dink32 and target
ppcbug, target sds
<PA, Sparclet, Sparclite, Z8000>: Delete nodes.
Pedro Alves [Mon, 24 Aug 2015 14:40:26 +0000 (15:40 +0100)]
Delete the remaining ROM monitor targets
Ref: https://sourceware.org/ml/gdb/2015-07/msg00011.html
All of these targets use gdb/monitor.c, which has bit rotted
years ago (I'd guess around ~6), and nobody seems to
have noticed:
| target | source |
|----------------+----------------------|
| target dbug | gdb/dbug-rom.c |
| target picobug | gdb/microblaze-rom.c |
| target dink32 | gdb/dink32-rom.c |
| target m32r | gdb/m32r-rom.c |
| target mon2000 | gdb/m32r-rom.c |
| target ppcbug | gdb/ppcbug-rom.c |
This deletes them, along with finally removing monitor.c.
A manual update will be done separately.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* NEWS: Mention removed support for the various ROM monitors.
* Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
* configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
gdb_target_obs.
(m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
gdb_target_obs.
(microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
dsrec.o from gdb_target_obs.
(microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
from gdb_target_obs.
(powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
gdb_target_obs.
(powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
dink32-rom.o from gdb_target_obs.
(sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
(sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
* dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
Jan Stancek [Mon, 24 Aug 2015 13:50:15 +0000 (14:50 +0100)]
Fix the partial disassembly of a broken three byte instruction at the end of a function.
opcodes * i386-dis.c (print_insn): Fix decoding of three byte operands.
tests * gas/i386/intel.s: Add test of disassembly of a potential
three byte instuction at the end of a function.
* gas/i386/intel.d: Update expected disassembly.
Andreas Arnez [Mon, 24 Aug 2015 13:37:40 +0000 (15:37 +0200)]
gnu_vector.exp: Avoid some more known FAILs
This avoids two more types of FAILs with the gnu_vector test case.
First, for POWER targets newer GCCs emit an ABI note when invoked with
"-mcpu=native". Then the test case fell back to non-native compile,
producing code for a non-vector ABI. But that is not supported by GDB.
Thus the compiler note is now suppressed with "-Wno-psabi".
Second, on s390 the test case produced FAILs after falling back to a
non-vector ABI when using "finish" or "return" in a vector-valued
function. This was due to a long-standing known bug (Bug 8549). This
case is now detected, and KFAILs are emitted instead.
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.exp: Try compilation with "-mcpu=native
-Wno-psabi" if "-mcpu=native" fails. For the tests with "finish"
and "return" use KFAIL when GDB can not read/write the vector
return value.
Yaakov Selkowitz [Mon, 24 Aug 2015 09:57:03 +0000 (10:57 +0100)]
Missing parts of fixes for in-tree libiconv
(Commit
d23d1dff missed pushing the config/iconv.m4 change, and to
regenerate binutils' configure.)
Original description:
This is the second in a series of patches to make a build with an
in-tree GNU libiconv work as designed.
Currently GDB is the only toolchain component which actually uses an
in-tree libiconv. This patch modifies the common AM_ICONV to use an
in-tree libiconv when present and not already provided by libc.
(GDB's workaround uses an in-tree libiconv even when libc provides
iconv(3); I'm not sure when or why that would be desirable.)
config/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* iconv.m4 (AM_ICONV_LINK): Use in-tree libiconv when present.
binutils/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* configure: Regenerate.
GDB Administrator [Mon, 24 Aug 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sun, 23 Aug 2015 11:24:45 +0000 (20:54 +0930)]
Reorder enum output_type for better code generation
Works around a gcc bug #67328 for the most commonly used of bfd_link_pic
and bfd_link_executable.
* bfdlink.h (enum output_type): Reorder enum.
GDB Administrator [Sun, 23 Aug 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 22 Aug 2015 03:54:34 +0000 (13:24 +0930)]
Uninitialized vd_nodename
Belt and braces fix. Either of the changes here is sufficient to
ensure vd_nodename is initialized properly.
* elf.c (_bfd_elf_slurp_version_tables): Always init vd_nodename.
Don't copy fields not set by _bfd_elf_swap_verdef_in.
GDB Administrator [Sat, 22 Aug 2015 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Fri, 21 Aug 2015 22:59:33 +0000 (23:59 +0100)]
Fix ax.c:gdb_eval_agent_expr
In C++ mode:
src/gdb/gdbserver/ax.c: In function ‘eval_result_type gdb_eval_agent_expr(eval_agent_expr_context*, agent_expr*, ULONGEST*)’:
src/gdb/gdbserver/ax.c:1335:11: error: invalid conversion from ‘int’ to ‘eval_result_type’ [-fpermissive]
return 1;
^
"1" as an enum eval_result_type is expr_eval_empty_expression, but
clearly this wants to return expr_eval_unhandled_opcode.
gdb/gdbserver/ChangeLog:
2015-08-21 Pedro Alves <palves@redhat.com>
* ax.c (gdb_eval_agent_expr): Return expr_eval_unhandled_opcode
instead of literal 1.
Pedro Alves [Fri, 21 Aug 2015 22:49:37 +0000 (23:49 +0100)]
C++: Initialize a couple const globals
In C++ mode, we get:
src/gdb/gdbserver/tdesc.c:43:33: error: uninitialized const ‘default_description’ [-fpermissive]
static const struct target_desc default_description;
^
In file included from src/gdb/gdbserver/tdesc.c:19:0:
src/gdb/gdbserver/tdesc.h:26:8: note: ‘const struct target_desc’ has no user-provided default constructor
struct target_desc
^
gdb/ChangeLog:
2015-08-21 Pedro Alves <palves@redhat.com>
* frame.c (null_frame_id): Explicitly zero-initialize.
gdb/gdbserver/ChangeLog:
2015-08-21 Pedro Alves <palves@redhat.com>
* tdesc.c (default_description): Explicitly zero-initialize.
Tom Tromey [Fri, 21 Aug 2015 22:45:50 +0000 (23:45 +0100)]
gdb/dwarf2read.c: rename a field for c++
Fixes:
../../src/gdb/dwarf2read.c:127:15: error: declaration of ‘asection* dwarf2_section_info::<anonymous union>::asection’ [-fpermissive]
asection *asection;
^
In file included from ../../src/gdb/common/common-types.h:35:0,
from ../../src/gdb/common/common-defs.h:44,
from ../../src/gdb/defs.h:28,
from ../../src/gdb/dwarf2read.c:31:
../bfd/bfd.h:1596:3: error: changes meaning of ‘asection’ from ‘typedef struct bfd_section asection’ [-fpermissive]
} asection;
^
gdb/ChangeLog:
2015-08-21 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (struct dwarf2_section_info): Rename field
'asection' to 'section'.
(dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section)
(dwarf2_locate_sections, dwarf2_locate_sections)
(locate_dwz_sections, locate_v1_virtual_dwo_sections)
(dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections)
(dwarf2_locate_v2_dwp_sections): Adjust.
Patrick Palka [Fri, 21 Aug 2015 16:28:19 +0000 (12:28 -0400)]
tui: don't overwrite a secondary prompt that was given no input
This patch fixes the following bug in TUI:
(gdb) break foo
No symbol table is loaded. Use the "file" command.
Make breakpoint pending on future shared library load? (y or [n]) <ENTER>
By submitting an empty command line to a secondary prompt, the line
corresponding to the secondary prompt is undesirably cleared and
overwritten. Outside of a secondary prompt, clearing the prompt line
after submitting an empty command line is intended behavior which
complements GDB's repeat-command shorthand. But inside a secondary
prompt, this behavior is undesired since the shorthand is not applicable
in that case. We should retain the secondary-prompt line even when it's
given no input.
This patch makes sure that a prompt that was given an empty command line
is cleared and overwritten only if it's not a secondary prompt. To
acheive this, a new predicate is defined which informs us whether the
current input handler is a secondary prompt.
gdb/ChangeLog:
* top.h (gdb_in_secondary_prompt_p): Declare.
* top.c (gdb_secondary_prompt_depth): Define.
(gdb_in_secondary_prompt_p): Define.
(gdb_readline_wrapper_cleanup): Decrement
gdb_secondary_prompt_depth.
(gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
* tui/tui-io.c (tui_getc): Don't clear the prompt line if we
are in a secondary prompt.
Patrick Palka [Fri, 21 Aug 2015 16:04:25 +0000 (12:04 -0400)]
Use tui_putc to output newline entered by the user
This is necessary to make sure that start_line is updated after a
command has been entered. Usually, start_line gets updated anyway
because most commands output text, and outputting text is done through
the function tui_puts, which updates start_line. However if a command
does not output text, then tui_puts will not get called and start_line
will not get updated in time for the next prompt to be displayed.
One can observe this bug by executing the command "delete" within TUI.
After executing, the prompt line
(gdb) delete
gets overwritten by the next prompt. With this patch, the prompt line
gets preserved.
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
emit the newline.
Pedro Alves [Fri, 21 Aug 2015 18:52:36 +0000 (19:52 +0100)]
Fix gdbserver crash exposed by gdb.threads/process-dies-while-handling-bp.exp
Running that test in a loop, I found a gdbserver core dump with the
following back trace:
Core was generated by `../gdbserver/gdbserver --once --multi :2346'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x0000000000406ab6 in inferior_regcache_data (inferior=0x0) at src/gdb/gdbserver/inferiors.c:236
236 return inferior->regcache_data;
(gdb) up
#1 0x0000000000406d7f in get_thread_regcache (thread=0x0, fetch=1) at src/gdb/gdbserver/regcache.c:31
31 regcache = (struct regcache *) inferior_regcache_data (thread);
(gdb) bt
#0 0x0000000000406ab6 in inferior_regcache_data (inferior=0x0) at src/gdb/gdbserver/inferiors.c:236
#1 0x0000000000406d7f in get_thread_regcache (thread=0x0, fetch=1) at src/gdb/gdbserver/regcache.c:31
#2 0x0000000000409271 in prepare_resume_reply (buf=0x20dd593 "", ptid=..., status=0x20edce0) at src/gdb/gdbserver/remote-utils.c:1147
#3 0x000000000040ab0a in vstop_notif_reply (event=0x20edcc0, own_buf=0x20dd590 "T05") at src/gdb/gdbserver/server.c:183
#4 0x0000000000426b38 in notif_write_event (notif=0x66e6c0 <notif_stop>, own_buf=0x20dd590 "T05") at src/gdb/gdbserver/notif.c:69
#5 0x0000000000426c55 in handle_notif_ack (own_buf=0x20dd590 "T05", packet_len=8) at src/gdb/gdbserver/notif.c:113
#6 0x000000000041118f in handle_v_requests (own_buf=0x20dd590 "T05", packet_len=8, new_packet_len=0x7fff742c77b8)
at src/gdb/gdbserver/server.c:2862
#7 0x0000000000413850 in process_serial_event () at src/gdb/gdbserver/server.c:4148
#8 0x0000000000413945 in handle_serial_event (err=0, client_data=0x0) at src/gdb/gdbserver/server.c:4196
#9 0x000000000041a1ef in handle_file_event (event_file_desc=5) at src/gdb/gdbserver/event-loop.c:429
#10 0x00000000004199b6 in process_event () at src/gdb/gdbserver/event-loop.c:184
#11 0x000000000041a735 in start_event_loop () at src/gdb/gdbserver/event-loop.c:547
#12 0x00000000004123d2 in captured_main (argc=4, argv=0x7fff742c7ac8) at src/gdb/gdbserver/server.c:3562
#13 0x000000000041252e in main (argc=4, argv=0x7fff742c7ac8) at src/gdb/gdbserver/server.c:3631
Clearly this means that a thread pushed a stop reply in the event
queue, and then before GDB confused the event, the whole process died,
along with its thread. But the pending thread event was left
dangling. When GDB fetched that event, gdbserver looked up the
corresponding thread, but found NULL; not expecting this, gdbserver
crashes when it tries to read this thread's registers.
gdb/gdbserver/
2015-08-21 Pedro Alves <palves@redhat.com>
PR gdb/18749
* inferiors.c (remove_thread): Discard any pending stop reply for
this thread.
* server.c (remove_all_on_match_pid): Rename to ...
(remove_all_on_match_ptid): ... this. Work with a filter ptid
instead of a pid.
(discard_queued_stop_replies): Change parameter to a ptid. Now
extern.
(handle_v_kill, kill_inferior_callback)
(process_serial_event): Adjust.
(captured_main): Call initialize_notif before starting the
program, thus before threads are created.
* server.h (discard_queued_stop_replies): Declare.
Pedro Alves [Fri, 21 Aug 2015 18:20:31 +0000 (19:20 +0100)]
gdbserver: don't pick a random thread if the current thread dies
In all-stop mode, if the current thread disappears while stopping all
threads, gdbserver calls set_desired_thread(0) ['0' means "I want the
continue thread"] which just picks the first thread in the list.
This looks like a dangerous thing to do. GDBserver continues
processing whatever it was doing, but to the wrong thread. If
debugging more than one process, we may even pick the wrong process.
Instead, GDBserver should detect the situation and bail out of
whatever is was doing.
The backends used to pay attention to the set 'cont_thread' (the Hc
thread, used in the old way to resume threads, before vCont), but all
such 'cont_thread' checks have been eliminated meanwhile. The
remaining implicit dependencies that I found on there being a selected
thread in the backends are in the Ctrl-C handling, which some backends
use as thread to send a signal to. Even that seems to me to be better
handled by always using the first thread in the list or by using the
signal_pid PID.
In order to make this a systematic approach, I'm making
set_desired_thread never fallback to a random thread, and instead end
up with current_thread == NULL, like already done in non-stop mode.
Then I updated all callers to handle the situation.
I stumbled on this while fixing other bugs exposed by
gdb.threads/fork-plus-threads.exp test. The problems I saw were fixed
in a different way, but in any case, I think the potential for
problems is more or less obvious, and the resulting code looks a bit
less magical to me.
Tested on x86-64 Fedora 20, w/ native-extended-gdbserver board.
gdb/gdbserver/ChangeLog:
2015-08-21 Pedro Alves <palves@redhat.com>
* linux-low.c (wait_for_sigstop): Always switch to no thread
selected if the previously current thread dies.
* lynx-low.c (lynx_request_interrupt): Use the first thread's
process instead of the current thread's.
* remote-utils.c (input_interrupt): Don't check if there's no
current thread.
* server.c (gdb_read_memory, gdb_write_memory): If setting the
current thread to the general thread fails, error out.
(handle_qxfer_auxv, handle_qxfer_libraries)
(handle_qxfer_libraries_svr4, handle_qxfer_siginfo)
(handle_qxfer_spu, handle_qxfer_statictrace, handle_qxfer_fdpic)
(handle_query): Check if there's a thread selected instead of
checking whether there's any thread in the thread list.
(handle_qxfer_threads, handle_qxfer_btrace)
(handle_qxfer_btrace_conf): Don't error out early if there's no
thread in the thread list.
(handle_v_cont, myresume): Don't set the current thread to the
continue thread.
(process_serial_event) <Hg handling>: Also set thread_id if the
previous general thread is still alive.
(process_serial_event) <g/G handling>: If setting the current
thread to the general thread fails, error out.
* spu-low.c (spu_resume, spu_request_interrupt): Use the first
thread's lwp instead of the current thread's.
* target.c (set_desired_thread): If the desired thread was not
found, leave the current thread pointing to NULL. Return an int
(boolean) indicating success.
* target.h (set_desired_thread): Change return type to int.
Gary Benson [Fri, 21 Aug 2015 16:10:24 +0000 (17:10 +0100)]
Make remote file transfers interruptible
This commit makes it possible to interrupt remote file transfers.
Gary Benson [Fri, 21 Aug 2015 16:09:20 +0000 (17:09 +0100)]
Warn when accessing binaries from remote targets
GDB provides no indicator of progress during file operations, and can
appear to have locked up during slow remote transfers. This commit
updates GDB to print a warning each time a file is accessed over RSP.
An additional message detailing how to avoid remote transfers is
printed for the first transfer only.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_open>: New argument
warn_if_slow. Update comment. All implementations updated.
(target_fileio_open_warn_if_slow): New declaration.
* target.c (target_fileio_open): Renamed as...
(target_fileio_open_1): ...this. New argument warn_if_slow.
Pass warn_if_slow to implementation. Update debug printing.
(target_fileio_open): New function.
(target_fileio_open_warn_if_slow): Likewise.
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
target_fileio_open_warn_if_slow.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Cope with remote transfer warnings.
Gary Benson [Fri, 21 Aug 2015 15:55:53 +0000 (16:55 +0100)]
Fix stale cleanup left by linux_mntns_access_fs
This commit fixes a stale cleanup left by linux_mntns_access_fs.
gdb/ChangeLog:
* nat/linux-namespaces.c (linux_mntns_access_fs):
Do not overwrite old_chain.
Nick Clifton [Fri, 21 Aug 2015 15:42:14 +0000 (16:42 +0100)]
Allow symbol and label names to be enclosed in double quotes.
gas PR gas/18581
* expr.c (get_symbol_end): Rename to get_symbol_name. Add a
return parameter pointing to the start of the symbol. Allow
symbol names enclosed in double quotes.
(restore_line_pointer): New function. Replace the NUL character
inserted into the input stream with the given character. If the
character was a double quote, advance the input pointer.
* expr.h (get_symbol_end): Delete.
(get_symbol_name): Add prototype.
(restore_line_pointer): Prototype.
* read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
* doc/as.texinfo (Symbol Intro): Document that symbol names can
now be enclosed in double quotes.
* cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
Use restore_line_pointer to replace the NUL in the input stream.
Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
Check for the use of double quoted symbol names.
* expr.c: Likewise.
* config/obj-aout.c: Likewise.
* config/obj-coff-seh.c: Likewise.
* config/obj-coff.c: Likewise.
* config/obj-elf.c: Likewise.
* config/obj-evax.c: Likewise.
* config/obj-macho.c: Likewise.
* config/obj-som.c: Likewise.
* config/tc-alpha.c: Likewise.
* config/tc-arc.c: Likewise.
* config/tc-arm.c: Likewise.
* config/tc-dlx.c: Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-hppa.c: Likewise.
* config/tc-i370.c: Likewise.
* config/tc-i386-intel.c: Likewise.
* config/tc-i386.c: Likewise.
* config/tc-i960.c: Likewise.
* config/tc-ia64.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-m32r.c: Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-mn10200.c: Likewise.
* config/tc-mn10300.c: Likewise.
* config/tc-nios2.c: Likewise.
* config/tc-ppc.c: Likewise.
* config/tc-s390.c: Likewise.
* config/tc-score.c: Likewise.
* config/tc-score7.c: Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-tic6x.c: Likewise.
* config/tc-tilegx.c: Likewise.
* config/tc-tilepro.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-xtensa.c: Likewise.
* config/tc-z80.c: Likewise.
* dw2gencfi.c: Likewise.
* dwarf2dbgc.: Likewise.
* ecoff.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
tests PR gas/18581
* gas/all/byte.d: Disable this test. Quoted expressions
are now allowed in .byte directives.
* gas/all/quoted-sym-names.s: New test.
* gas/all/quoted-sym-names.d: Expected output.
* gas/all/gas.exp: Run the new test.
Max Filippov [Thu, 2 Jul 2015 12:10:58 +0000 (15:10 +0300)]
xtensa: implement NPTL helpers
These changes allow debugging multithreaded NPTL xtensa applications.
2015-08-20 Max Filippov <jcmvbkbc@gmail.com>
gdb/gdbserver/
* configure.srv (xtensa*-*-linux*): Add srv_linux_thread_db=yes.
* linux-xtensa-low.c (arch/xtensa.h gdb_proc_service.h): New
#includes.
(ps_get_thread_area): New function.
2015-08-20 Max Filippov <jcmvbkbc@gmail.com>
gdb/
* arch/xtensa.h: New file.
* xtensa-linux-nat.c (gdb_proc_service.h): New #include.
(ps_get_thread_area): New function.
* xtensa-linux-tdep.c (xtensa_linux_init_abi): Add call to
set_gdbarch_fetch_tls_load_module_address to enable TLS support.
* xtensa-tdep.c (osabi.h): New #include.
(xtensa_gdbarch_init): Call gdbarch_init_osabi to register
xtensa-specific hooks.
* xtensa-tdep.h (struct xtensa_elf_gregset_t): Add threadptr
member and move the structure to arch/xtensa.h.
Alexander Fomin [Fri, 21 Aug 2015 11:06:41 +0000 (14:06 +0300)]
PR binutils/18257: Properly decode x86/Intel mask instructions.
opcodes/
PR binutils/18257
* i386-dis.c: Use MOD_TABLE for most of mask instructions.
(MOD enum): Add MOD_VEX_W_0_0F41_P_0_LEN_1, MOD_VEX_W_1_0F41_P_0_LEN_1,
MOD_VEX_W_0_0F41_P_2_LEN_1, MOD_VEX_W_1_0F41_P_2_LEN_1,
MOD_VEX_W_0_0F42_P_0_LEN_1, MOD_VEX_W_1_0F42_P_0_LEN_1,
MOD_VEX_W_0_0F42_P_2_LEN_1, MOD_VEX_W_1_0F42_P_2_LEN_1,
MOD_VEX_W_0_0F44_P_0_LEN_1, MOD_VEX_W_1_0F44_P_0_LEN_1,
MOD_VEX_W_0_0F44_P_2_LEN_1, MOD_VEX_W_1_0F44_P_2_LEN_1,
MOD_VEX_W_0_0F45_P_0_LEN_1, MOD_VEX_W_1_0F45_P_0_LEN_1,
MOD_VEX_W_0_0F45_P_2_LEN_1, MOD_VEX_W_1_0F45_P_2_LEN_1,
MOD_VEX_W_0_0F46_P_0_LEN_1, MOD_VEX_W_1_0F46_P_0_LEN_1,
MOD_VEX_W_0_0F46_P_2_LEN_1, MOD_VEX_W_1_0F46_P_2_LEN_1,
MOD_VEX_W_0_0F47_P_0_LEN_1, MOD_VEX_W_1_0F47_P_0_LEN_1,
MOD_VEX_W_0_0F47_P_2_LEN_1, MOD_VEX_W_1_0F47_P_2_LEN_1,
MOD_VEX_W_0_0F4A_P_0_LEN_1, MOD_VEX_W_1_0F4A_P_0_LEN_1,
MOD_VEX_W_0_0F4A_P_2_LEN_1, MOD_VEX_W_1_0F4A_P_2_LEN_1,
MOD_VEX_W_0_0F4B_P_0_LEN_1, MOD_VEX_W_1_0F4B_P_0_LEN_1,
MOD_VEX_W_0_0F4B_P_2_LEN_1, MOD_VEX_W_0_0F91_P_0_LEN_0,
MOD_VEX_W_1_0F91_P_0_LEN_0, MOD_VEX_W_0_0F91_P_2_LEN_0,
MOD_VEX_W_1_0F91_P_2_LEN_0, MOD_VEX_W_0_0F92_P_0_LEN_0,
MOD_VEX_W_0_0F92_P_2_LEN_0, MOD_VEX_W_0_0F92_P_3_LEN_0,
MOD_VEX_W_1_0F92_P_3_LEN_0, MOD_VEX_W_0_0F93_P_0_LEN_0,
MOD_VEX_W_0_0F93_P_2_LEN_0, MOD_VEX_W_0_0F93_P_3_LEN_0,
MOD_VEX_W_1_0F93_P_3_LEN_0, MOD_VEX_W_0_0F98_P_0_LEN_0,
MOD_VEX_W_1_0F98_P_0_LEN_0, MOD_VEX_W_0_0F98_P_2_LEN_0,
MOD_VEX_W_1_0F98_P_2_LEN_0, MOD_VEX_W_0_0F99_P_0_LEN_0,
MOD_VEX_W_1_0F99_P_0_LEN_0, MOD_VEX_W_0_0F99_P_2_LEN_0,
MOD_VEX_W_1_0F99_P_2_LEN_0, MOD_VEX_W_0_0F3A30_P_2_LEN_0,
MOD_VEX_W_1_0F3A30_P_2_LEN_0, MOD_VEX_W_0_0F3A31_P_2_LEN_0,
MOD_VEX_W_1_0F3A31_P_2_LEN_0, MOD_VEX_W_0_0F3A32_P_2_LEN_0,
MOD_VEX_W_1_0F3A32_P_2_LEN_0, MOD_VEX_W_0_0F3A33_P_2_LEN_0,
MOD_VEX_W_1_0F3A33_P_2_LEN_0.
(vex_w_table): Replace terminals with MOD_TABLE entries for
most of mask instructions.
gas/testsuite
PR binutils/18257
* gas/i386/disassem.s: Add mask instructions with invalid ModR/M byte.
* gas/i386/x86-64-disassem.s: Likewise.
* gas/i386/disassem.d: Updated.
* gas/i386/x86-64-disassem.d: Likewise.
Pedro Alves [Fri, 21 Aug 2015 09:13:27 +0000 (10:13 +0100)]
Add readahead cache to gdb's vFile:pread
This patch almost halves the time it takes to "target remote + run to
main" on a higher-latency connection.
E.g., I've got a ping time of ~85ms to an x86-64 machine on the gcc
compile farm (almost 2000km away from me), and I'm behind a ~16Mbit
ADSL. When I connect to a gdbserver debugging itself on that machine
and run to main, it takes almost 55 seconds:
[palves@gcc76] $ ./gdbserver :9999 ./gdbserver
[palves@home] $ ssh -L 9999:localhost:9999 gcc76.fsffrance.org
[palves@home] $ time ./gdb -data-directory=data-directory -ex "tar rem :9999" -ex "b main" -ex "c" -ex "set confirm off" -ex "quit"
Pristine gdb 7.10.50.
20150820-cvs gets us:
...
Remote debugging using :9999
Reading symbols from target:/home/palves/gdb/build/gdb/gdbserver/gdbserver...done.
Reading symbols from target:/lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
0x00007ffff7ddd190 in ?? () from target:/lib64/ld-linux-x86-64.so.2
Breakpoint 1 at 0x41200c: file ../../../src/gdb/gdbserver/server.c, line 3635.
Continuing.
Breakpoint 1, main (argc=1, argv=0x7fffffffe3d8) at ../../../src/gdb/gdbserver/server.c:3635
3635 ../../../src/gdb/gdbserver/server.c: No such file or directory.
/home/palves/gdb/build/gdb/gdbserver/gdbserver: No such file or directory.
real 0m54.803s
user 0m0.329s
sys 0m0.064s
While with the readahead cache added by this patch, it drops to:
real 0m29.462s
user 0m0.454s
sys 0m0.054s
I added a few counters to show cache hit/miss, and got:
readahead cache miss 142
readahead cache hit 310
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-21 Pedro Alves <palves@redhat.com>
* remote.c (struct readahead_cache): New.
(struct remote_state) <readahead_cache>: New field.
(remote_open_1): Invalidate the cache.
(readahead_cache_invalidate, readahead_cache_invalidate_fd): New
functions.
(remote_hostio_pwrite): Invalidate the readahead cache.
(remote_hostio_pread): Rename to ...
(remote_hostio_pread_vFile): ... this.
(remote_hostio_pread_from_cache): New function.
(remote_hostio_pread): Reimplement.
(remote_hostio_close): Invalidate the readahead cache.
Marcin Cieslak [Wed, 19 Aug 2015 16:51:31 +0000 (16:51 +0000)]
procfs.c: Include "filestuff.h"
Fixes implicit function declaration
error in gdb/procfs.c:4927 about undeclared
make_cleanup_close().
gdb/ChangeLog:
PR build/18843
* procfs.c: Include "filestuff.h".
Patrick Palka [Wed, 19 Aug 2015 01:08:57 +0000 (21:08 -0400)]
Remove fields curch and cur_line from TUI_CMD_WIN
These fields are currently used to track the location of the cursor
inside the command window. But their usefulness is questionable because
ncurses already internally keeps track of the location of the cursor,
whose coordinates we can query using the functions getyx(), getcurx() or
getcury(). It is an unnecessary pain to keep these fields in sync with
ncurses, and their meaning is not well-defined anyway. For instance, it
is not clear whether the coordinates held in these fields are
authoritative, or whether the coordinates reported by ncurses are.
So to keep things simple, this patch removes these fields and replaces
existing reads of these fields with calls to the appropriate ncurses
querying functions, and replaces writes to these fields with calls to
wmove() (when necessary and applicable).
In the function tui_cont_sig(), I removed the call to wmove() entirely
because moving to (start_line, curch) makes no sense. The move should
have been to (cur_line, curch) -- which would now be a no-op.
Tested on x86_64 Fedora 22, no obvious regressions.
gdb/ChangeLog:
* tui/tui-data.h (tui_command_info): Remove fields cur_line and
curch.
* tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
cur_line or curch, instead call wmove().
(init_win_info) [CMD_WIN]: Likewise.
* tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
instead call getcury().
(tui_redisplay_readline): Don't set cur_line or curch.
(tui_mld_erase_entire_line): Don't read cur_line, instead call
getcury().
(tui_cont_sig): Remove call to wmove.
(tui_getc): Don't read cur_line or curch, instead call getcury()
or getyx(). Don't set curch.
* tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
set cur_line or curch. Always move cursor to (0,0).
GDB Administrator [Fri, 21 Aug 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Thu, 20 Aug 2015 19:08:48 +0000 (20:08 +0100)]
Fix gdb.server/solib-list.exp native-extended-gdbserver regression
Commit
221e1a37 (remote non-stop: Process initially stopped threads
before other commands) caused a test regression when testing with the
native-extended-gdbserver board:
FAIL: gdb.server/solib-list.exp: non-stop 1: non-stop interior stop (timeout)
This "interior stop" now happens before "target remote" prints the
prompt, so we should no longer explicitly expect it.
gdb/testsuite/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* gdb.server/solib-list.exp: No longer expect an interior stop in
non-stop mode.
Pedro Alves [Thu, 20 Aug 2015 17:27:55 +0000 (18:27 +0100)]
remote non-stop: Process initially stopped threads before other commands
The main motivation for this is making non-stop / all-stop behave
similarly on initial connection, in order to move in the direction of
reimplementing all-stop mode with the remote target always running in
non-stop mode.
When we connect to a remote target in non-stop mode, we may find
threads either running or already stopped. The act of connecting
itself does not force threads to stop. To handle that, the remote
non-stop connection is currently roughly like this:
#1 - Fetch list of remote threads (qXfer:threads:read, qfThreadInfo,
etc). All threads are assumed to be running until the target
reports an asynchronous stop reply for them.
#2 - Fetch the initial set of threads that were already stopped, with
the '?' packet. (In non-stop, this is coupled with the vStopped
mechanism to be able to retrieve the status of more than one
thread.)
The stop replies fetched in #2 are placed in the pending stop reply
queue, and left for the regular event loop to process. That is,
"target remote" finishes and returns _before_ those stops are
processed.
That means that it's possible to have GDB process further commands
before the initial set of stopped threads is reported to the user.
E.g., before the patch, note how the prompt is printed before the
frame:
Remote debugging using :9999
(gdb)
[Thread 15296] #1 stopped.
0x0000003615a011f0 in ?? ()
Even though thread #1 was not running, for a moment, the user can see
it as such:
$ gdb a.out -ex "set non-stop 1" -ex "tar rem :9999" -ex "info threads" -ex "info registers"
Remote debugging using :9999
Id Target Id Frame
* 1 Thread 4772 (running)
Target is executing. <<<<<<< info registers
(gdb)
[Thread 4772] #1 stopped.
0x0000003615a011f0 in ?? ()
To fix that, this commit makes gdb process all threads found already
stopped at connection time, before giving the prompt to the user.
The fix takes a cue from fork-child.c:startup_inferior [1], and
processes the events locally in remote.c, avoiding the whole
wait_for_inferior/handle_inferior_event path. I decided to try this
approach after noticing that:
- several cases in handle_inferior_event miss checking stop_soon.
- we don't want to fetch the thread list in normal_stop.
and trying to fix them was resulting in sprinkling stop_soon checks in
many places, and uglifying normal_stop even more.
While with this patch, I'm avoiding changing GDB's output other than
when the prompt is printed, I think this approach is more flexible if
we do want to change it. And also, it's likely easier to get rid of
the MI *running event that is still sent for threads that are
initially found stopped, if we want to.
This happens to fix the testsuite too. All non-stop tests are racy
against "target remote" / gdbserver testing currently. That is,
sometimes the tests run, but other times they're just skipped without
any indication of PASS/FAIL. When that happens, the logs show:
target remote localhost:2346
Remote debugging using localhost:2346
(gdb)
[Thread 25418] #1 stopped.
0x0000003615a011f0 in ?? ()
^CQuit
(gdb) Remote debugging from host 127.0.0.1
Killing process(es): 25418
monitor exit
(gdb) Remote connection closed
(gdb) testcase /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/multi-create-ns-info-thr.exp completed in 61 seconds
The trouble here is that there's output after the prompt, and the
regex in question doesn't expect that:
-re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
[1] - before startup_inferior was added, we'd go through
wait_for_inferior/handle_inferior_event while going through the shell,
and that turned out problematic.
Tested on x86_64 Fedora 20, gdbserver.
gdb/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* infrun.c (print_target_wait_results): Make extern.
* infrun.h (print_target_wait_results): Declare.
* remote.c (set_stop_requested_callback): Delete.
(process_initial_stop_replies): New function.
(remote_start_remote): Use it.
(stop_reply_queue_length): New function.
gdb/testsuite/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* gdb.server/connect-stopped-target.c: New file.
* gdb.server/connect-stopped-target.exp: New file.
Pedro Alves [Thu, 20 Aug 2015 11:30:08 +0000 (12:30 +0100)]
Fix language of compilation unit with unknown file extension
Here, in dwarfread.c:process_full_comp_unit:
/* Set symtab language to language from DW_AT_language. If the
compilation is from a C file generated by language preprocessors, do
not set the language if it was already deduced by start_subfile. */
if (!(cu->language == language_c
&& COMPUNIT_FILETABS (cust)->language != language_c))
COMPUNIT_FILETABS (cust)->language = cu->language;
in case start_subfile doesn't manage to deduce a language
COMPUNIT_FILETABS(cust)->language ends up as language_unknown, not
language_c. So the condition above evals false and we never set the
language from the cu's language.
gdb/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* dwarf2read.c (process_full_comp_unit): To tell whether
start_subfile managed to deduce a language, test for
language_unknown instead of language_c.
gdb/testsuite/ChangeLog:
2015-08-20 Pedro Alves <palves@redhat.com>
* gdb.dwarf2/comp-unit-lang.exp: New file.
* gdb.dwarf2/comp-unit-lang.c: New file.
Pierre-Marie de Rodat [Wed, 19 Aug 2015 15:12:48 +0000 (17:12 +0200)]
[Ada] Fix parsing for expressions with attributes and characters
Before this change, trying to evaluate the following Ada expression
yielded a syntax error, even though it's completely legal:
(gdb) p s'first = 'a'
Error in expression, near `'.
The problem lies in the lexer (gdb/ada-lex.l): at the point we reach "'a'",
we're still in the BEFORE_QUAL_QUOTE start condition (the mechanism to
distinguish character literals from other "tick" usages: qualified
expressions and attributes), so we consider that this quote is actually a
separate "tick".
This changes resets the start condition to INITIAL in the
{TICK}[a-zA-Z][a-zA-Z]+ rule (for attributes): attributes activate this
BEFORE_QUAL_QUOTE condition and in this case the above rule is always
executed rather than the <BEFORE_QUAL_QUOTE>"'" one (in flex, it's
always the longest match that is chosen). We now have instead:
(gdb) p s'first = 'a'
$1 = true
gdb/ChangeLog:
* ada-lex.l: Reset the start condition to INITIAL in the rule
that matches attributes.
gdb/testsuite/ChangeLog:
* gdb.ada/attr_ref_and_charlit.exp: New testcase.
* gdb.ada/attr_ref_and_charlit/foo.adb: New file.
Tested on x86_64-linux, no regression.
Alan Modra [Thu, 20 Aug 2015 02:32:45 +0000 (12:02 +0930)]
gold --emit-relocs
A symbol value in an ELF final linked binary is absolute, in contrast
to a relocatable object file where the value is section relative. For
--emit-relocs it is therefore incorrect to use the value of a section
symbol as the addend when adjusting relocs against input section
symbols to output section symbols.
PR gold/18846
* target-reloc.h (relocate_relocs <RELOC_ADJUST_FOR_SECTION_RELA>):
Subtract os->address() from addend.
* powerpc.cc (relocate_relocs): Likewise.
GDB Administrator [Thu, 20 Aug 2015 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in
Kevin Buettner [Mon, 3 Aug 2015 21:17:17 +0000 (14:17 -0700)]
dwarf2read.c: Check type of string valued attributes prior to decoding.
This change introduces a new function, dwarf2_string_attr(), which is
a wrapper for dwarf2_attr(). dwarf2read.c has been updated to
call dwarf2_string_attr in most instances where a string-valued
attribute is decoded to produce a string value. In most cases, it
simplifies the code; in some instances, the complexity of the code
remains unchanged.
I performed this change by looking for instances where the
result of DW_STRING was used in an assignment. Many of these
had a pattern which (roughly) looks something like this:
struct attribute *attr = NULL;
attr = dwarf2_attr (die, name, cu);
if (attr != NULL && DW_STRING (attr))
{
const char *str;
...
str = DW_STRING (attr);
... /* Use str in some fashion. */
}
Code of this form is transformed to look like this instead:
const char *str;
str = dwarf2_string_attr (die, name, cu)
if (str != NULL)
{
...
/* Use str in some fashion. */
...
}
In addition to invoking dwarf2_attr() and DW_STRING(),
dwarf2_string_attr() checks to make sure that the attribute's
`form' field matches one of DW_FORM_strp, DW_FORM_string, or
DW_FORM_GNU_strp_alt. If it does not match one of these forms,
it will return a NULL value in addition to calling complaint().
An earlier version of this patch did this type checking for one
particular instance where a string attribute was being decoded.
The situation that I was attempting to handle in that earlier patch is
this:
The Texas Instruments compiler uses the encoding for
DW_AT_MIPS_linkage_name for other purposes. TI uses the encoding,
0x2007, for TI_AT_TI_end_line which, unlike DW_AT_MIPS_linkage_name,
does not have a string-typed value. In this instance, GDB was attempting
to use an integer value as a string pointer, with predictable results.
(GDB would die with a segmentation fault.)
I've added a test which reproduces the problem that I was orignally
wanting to fix. It uses DW_AT_MIPS_linkage name with an associate
value which is a string, and again, where the value is a small
integer.
My test case causes GDB to segfault in an unpatched GDB. There
will be two PASSes in a patched GDB.
Unpatched GDB:
(gdb) ptype f
ERROR: Process no longer exists
UNRESOLVED: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
ERROR: Couldn't send ptype g to GDB.
UNRESOLVED: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
Patched GDB:
(gdb) ptype f
type = bool ()
(gdb) PASS: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
ptype g
type = bool ()
(gdb) PASS: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
I see no regressions on an x86_64 native target.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_string_attr): New function.
(lookup_dwo_unit, process_psymtab_comp_unit_reader)
(dwarf2_compute_name, dwarf2_physname, find_file_and_directory)
(read_call_site_scope, namespace_name, guess_full_die_structure_name)
(anonymous_struct_prefix, prepare_one_comp_unit): Use
dwarf2_string_attr in place of dwarf2_attr and DW_STRING.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-bad-mips-linkage-name.c: New file.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp: New file.
Jiong Wang [Wed, 19 Aug 2015 10:26:56 +0000 (11:26 +0100)]
[AArch64][6/6] LD support TLSLD load/store relocation types
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (IS_AARCH64_TLS_RELOC): Recognize new relocation
types, including BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
(elfNN_aarch64_final_link_relocate): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
ld/testsuite/
* ld-aarch64/emit-relocs-531.s: New testcase.
* ld-aarch64/emit-relocs-531-overflow.s: Likewise.
* ld-aarch64/emit-relocs-532.s: Likewise.
* ld-aarch64/emit-relocs-533.s: Likewise.
* ld-aarch64/emit-relocs-533-overflow.s: Likewise.
* ld-aarch64/emit-relocs-534.s: Likewise.
* ld-aarch64/emit-relocs-535.s: Likewise.
* ld-aarch64/emit-relocs-535-overflow.s: Likewise.
* ld-aarch64/emit-relocs-536.s: Likewise.
* ld-aarch64/emit-relocs-537.s: Likewise.
* ld-aarch64/emit-relocs-537-overflow.s: Likewise.
* ld-aarch64/emit-relocs-538.s: Likewise.
* ld-aarch64/emit-relocs-531.d: New expectation file.
* ld-aarch64/emit-relocs-531-overflow.d: Likewise.
* ld-aarch64/emit-relocs-532.d: Likewise.
* ld-aarch64/emit-relocs-533.d: Likewise.
* ld-aarch64/emit-relocs-533-overflow.d: Likewise.
* ld-aarch64/emit-relocs-534.d: Likewise.
* ld-aarch64/emit-relocs-535.d: Likewise.
* ld-aarch64/emit-relocs-535-overflow.d: Likewise.
* ld-aarch64/emit-relocs-536.d: Likewise.
* ld-aarch64/emit-relocs-537.d: Likewise.
* ld-aarch64/emit-relocs-537-overflow.d: Likewise.
* ld-aarch64/emit-relocs-538.d: Likewise.
* ld-aarch64/aarch64-elf.exp: Run new testcases.
Jiong Wang [Wed, 19 Aug 2015 10:22:22 +0000 (11:22 +0100)]
[AArch64][5/6] GAS support TLSLD load/store relocation types
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
* reloc.c: New entries, including
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC.
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-aarch64.c (reloc_table): New relocation types support for
dtprel_lo12.
(ldst_lo12_determine_real_reloc_type): Support
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
(parse_operands): Likewise.
(md_apply_fix): Likewise
(aarch64_force_relocation): Likewise.
(process_movw_reloc_info): Likewise.
gas/testsuite/
* gas/aarch64/reloc-dtprel_lo12-ldst8.s: New testcase.
* gas/aarch64/reloc-dtprel_lo12_nc-ldstc.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst16.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst16.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst32.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst32.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst64.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst64.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst8.d: New expectation file.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst8.d: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst16.d: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst16.d: Likewise.
* gas/aarch64/reloc-dtprel_lo12-ldst32.d: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst32.d: Likewise.
* gas/aarch64/reloc-dtprel-lo12-ldst64.d: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc-ldst64.d: Likewise.
Jiong Wang [Wed, 19 Aug 2015 10:18:25 +0000 (11:18 +0100)]
[AArch64][4/6] LD support TLSLD move/add relocation types
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
PR ld/18276
* elfnn-aarch64.c (IS_AARCH64_TLS_RELOC): Recognize new relocation
types, including BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2.
(elfNN_aarch64_final_link_relocate): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
ld/testsuite/
* ld-aarch64/emit-relocs-87.s: New testcase.
* ld-aarch64/emit-relocs-88.s: Likewise.
* ld-aarch64/emit-relocs-88-overflow.s: Likewise.
* ld-aarch64/emit-relocs-89.s: Likewise.
* ld-aarch64/emit-relocs-90.s: Likewise.
* ld-aarch64/emit-relocs-90-overflow.s: Likewise.
* ld-aarch64/emit-relocs-523.s: Likewise.
* ld-aarch64/emit-relocs-524.s: Likewise.
* ld-aarch64/emit-relocs-525.s: Likewise.
* ld-aarch64/emit-relocs-527.s: Likewise.
* ld-aarch64/emit-relocs-526.s: Likewise.
* ld-aarch64/emit-relocs-528.s: Likewise.
* ld-aarch64/emit-relocs-528-overflow.s: Likewise.
* ld-aarch64/emit-relocs-87.d: New expectation file.
* ld-aarch64/emit-relocs-88.d: Likewise.
* ld-aarch64/emit-relocs-88-overflow.d: Likewise.
* ld-aarch64/emit-relocs-89.d: Likewise.
* ld-aarch64/emit-relocs-90.d: Likewise.
* ld-aarch64/emit-relocs-90-overflow.d: Likewise.
* ld-aarch64/emit-relocs-91.d: Likewise.
* ld-aarch64/emit-relocs-523.d: Likewise.
* ld-aarch64/emit-relocs-524.d: Likewise.
* ld-aarch64/emit-relocs-525.d: Likewise.
* ld-aarch64/emit-relocs-526.d: Likewise.
* ld-aarch64/emit-relocs-527.d: Likewise.
* ld-aarch64/emit-relocs-528.d: Likewise.
* ld-aarch64/emit-relocs-528-overflow.d: Likewise.
* ld-aarch64/aarch64-elf.exp: Run new testcases.
Jiong Wang [Wed, 19 Aug 2015 10:02:34 +0000 (11:02 +0100)]
[AArch64][3/6] GAS support TLSLD move/add relocation types
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
* reloc.c (BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC,
BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2): New entries.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-aarch64.c (reloc_table): New relocation modifiers,
"dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
"dtprel_g1_nc", "dtprel_g2".
(md_apply_fix): Support new relocation types.
(aarch64_force_relocation): Likewise.
(process_movw_reloc_info): Likewise.
gas/testsuite/
* gas/aarch64/reloc-dtprel_g0.s: New testcase.
* gas/aarch64/reloc-dtprel_g0-ilp32.s: Likewise.
* gas/aarch64/reloc-dtprel_g0_nc.s: Likewise.
* gas/aarch64/reloc-dtprel_g0_nc-ilp32.s: Likewise.
* gas/aarch64/reloc-dtprel_g1.s: Likewise.
* gas/aarch64/reloc-dtprel_g1-ilp32.s: Likewise.
* gas/aarch64/reloc-dtprel_g1_nc.s: Likewise.
* gas/aarch64/reloc-dtprel_g2.s: Likewise.
* gas/aarch64/reloc-dtprel_hi12.s: Likewise.
* gas/aarch64/reloc-dtprel_hi12-ilp32.s: Likewise.
* gas/aarch64/reloc-dtprel_g0.d: New expectation file.
* gas/aarch64/reloc-dtprel_g0-ilp32.d: Likewise.
* gas/aarch64/reloc-dtprel_g0_nc.d: Likewise.
* gas/aarch64/reloc-dtprel_g0_nc-ilp32.d: Likewise.
* gas/aarch64/reloc-dtprel_g1.d: Likewise.
* gas/aarch64/reloc-dtprel_g1-ilp32.d: Likewise.
* gas/aarch64/reloc-dtprel_g1_nc.d: Likewise.
* gas/aarch64/reloc-dtprel_g2.d: Likewise.
* gas/aarch64/reloc-dtprel_hi12.d: Likewise.
* gas/aarch64/reloc-dtprel_hi12-ilp32.d: Likewise.
Jiong Wang [Wed, 19 Aug 2015 09:58:13 +0000 (10:58 +0100)]
[AArch64][2/6] LD support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (IS_AARCH64_TLS_RELOC): Recognize
BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
(aarch64_reloc_got_type): Likewise.
(elfNN_aarch64_final_link_relocate): Likewise.
(elfNN_aarch64_relocate_section): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
ld/testsuite/
* ld-aarch64/emit-relocs-530.s: New testcase.
* ld-aarch64/emit-relocs-92.s: Likewise.
* ld-aarch64/emit-relocs-530.d: New expectation file.
* ld-aarch64/emit-relocs-92.d: Likewise.
* ld-aarch64/aarch64-elf.exp: Run new testcases.
Jiong Wang [Wed, 19 Aug 2015 09:57:34 +0000 (10:57 +0100)]
[AArch64][1/6] GAS support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
2015-08-19 Jiong Wang <jiong.wang@arm.com>
bfd/
* reloc.c (BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC): New entry.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): New entry for
BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
gas/
* config/tc-aarch64.c (reloc_table): New relocation modifiers.
(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
(aarch64_force_relocation): Likewise.
gas/testsuite/
* gas/aarch64/reloc-dtprel_lo12_nc.s: New testcase.
* gas/aarch64/reloc-dtprel_lo12_nc-ilp32.s: Likewise.
* gas/aarch64/reloc-dtprel_lo12_nc.d: New expectation file.
* gas/aarch64/reloc-dtprel_lo12_nc-ilp32.d: Likewise.
Gary Benson [Wed, 19 Aug 2015 12:53:24 +0000 (13:53 +0100)]
Prelimit number of bytes to read in "vFile:pread:"
While handling "vFile:pread:" packets, gdbserver would read the
number of bytes requested regardless of whether this would fit
into the reply packet. gdbserver would then return a packet's
worth of data and discard the remainder. When accessing large
binaries GDB (via BFD) routinely makes large "vFile:pread:"
requests, resulting in gdbserver allocating large unnecessary
buffers and reading some portions of the file many times over.
This commit causes gdbserver to limit the number of bytes to be
read to a sensible maximum prior to allocating buffers and reading
data.
gdb/gdbserver/ChangeLog:
* hostio.c (handle_pread): Do not attempt to read more data
than hostio_reply_with_data can fit in a packet.
Alan Modra [Wed, 19 Aug 2015 03:02:54 +0000 (12:32 +0930)]
Remove link_info.pic
Adding type_pie to output_type allows us to remove link_info.pic and
with some reordering of the enum, produces better code.
include/
* bfdlink.h (enum output_type): Delete type_executable, add type_pde
and type_pie. Reorder.
(struct bfd_link_info): Delete pic field.
(bfd_link_executable, bfd_link_pde, bfd_link_pie, bfd_link_pic): Adjust.
ld/
* emultempl/aix.em: Don't set link_info.pic.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/sunos.em: Likewise.
* lexsup.c (parse_args): Likewise. Set type_pie for -pie.
* plugin.c (set_tv_header <LDPT_LINKER_OUTPUT>): Simplify.
Alan Modra [Wed, 19 Aug 2015 02:27:40 +0000 (11:57 +0930)]
Add bfd_link_pde, and simplify some tests of link_info.type
include/
* bfdlink.h (bfd_link_pde): Define.
bfd/
* elf-s390-common.c: Simplify expressions using
bfd_linke_executable, bfd_link_pie and bfd_link_pic.
* elf32-arm.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-frv.c: Likewise.
* elf32-m68k.c: Likewise.
* elf32-nios2.c: Likewise.
* elf32-ppc.c: Likewise.
* elf32-s390.c: Likewise.
* elf32-sh.c: Likewise.
* elf64-alpha.c: Likewise.
* elf64-ppc.c: Likewise.
* elf64-s390.c: Likewise.
* elflink.c: Likewise.
Cary Coutant [Mon, 27 Jul 2015 22:09:08 +0000 (15:09 -0700)]
Fix symbol versioning problems in PR 18703.
If a symbol is defined with ".symver foo,foo@VER", the assembler
creates two symbols in the object: one unversioned, and one with
the (non-default) version "VER". If foo is listed in a version
script, gold would then make the first of those symbols the
default version, and would ignore the second symbol as a
duplicate, without making it a non-default version. While this is
arguably reasonable behavior, it doesn't match Gnu ld behavior,
so this patch fixes that by allowing the second definition to
override the first by resetting the "default version" indication.
Several test cases from the Gnu ld testsuite also exposed another
related problem, where a symbol defined with ".symver foo,foo@",
placed into a shared library, is not handled properly by gold.
This patch also fixes that case, binding the symbol to the base
version.
gold/
PR gold/18703
* dynobj.cc (Versions::record_version): Handle symbol defined with
base version.
(Versions::symbol_section_contents): Likewise.
* symtab.h (Symbol::set_is_not_default): New class method.
(Symbol_table::resolve): Add is_default_version parameter.
(Symbol_table::should_override): Likewise.
* resolve.cc (Symbol_table::resolve): Add is_default_version parameter,
and pass to should_override. Adjust all callers and explicit
instantiations.
(Symbol_table::should_override): Add is_default_value parameter;
allow default version in a dynamic object to override existing
definition from same object.
* symtab.cc (Symbol_table::add_from_object): Handle case where same
symbol is defined as unversioned and non-default version in the same
object.
* testsuite/Makefile.am (ver_test_13): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ver_test_4.cc: Add test for symbol with base version.
* testsuite/ver_test_4.sh: Likewise.
* testsuite/ver_test_13.c: New source file.
* testsuite/ver_test_13.script: New version script.
* testsuite/ver_test_13.sh: New test case.
GDB Administrator [Wed, 19 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Tue, 11 Aug 2015 19:28:19 +0000 (15:28 -0400)]
gdbserver/linux-aarch32-low: build failure when NT_ARM_VFP not defined
On some older versions of GNU/Linux, gdbserver now fails to build
due to an undefined reference to NT_ARM_VFP. Same issue on Android,
where this macros is undefined until Android API level 21 (Android
5.0 "Lollipop").
This patch modifies linux-aarch32-low.c to define that macros when
not already defined.
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (NT_ARM_VFP): Define if not already defined.
Doug Evans [Tue, 18 Aug 2015 21:02:03 +0000 (14:02 -0700)]
PR mi/18833 gdb.execute ("set param value", to_string=True) will crash gdb if using MI
gdb/ChangeLog:
* cli/cli-logging.c (pop_output_files): Don't restore redirection
if MI-like.
* mi/mi-out.c: #include "vec.h".
(ui_filep): New type.
(DEV_VEC_P (ui_filep)): New type.
(struct ui_out_data) <buffer, original_buffer>: Delete.
(struct ui_out_data) <streams>: New member.
(mi_ui_out_impl): Add data_destroy field.
(mi_field_string, mi_field_fmt): Update.
(mi_flush, mi_redirect, field_separator): Update.
(mi_open, mi_close): Update.
(mi_out_buffered, mi_out_rewind, mi_out_put): Update.
(mi_out_data_ctor, mi_out_data_dtor): New functions.
(mi_out_new): Call mi_out_data_ctor.
testsuite/gdb/ChangeLog:
* lib/gdb.exp (skip_python_tests_prompt): Renamed from
skip_python_tests. New arg prompt_regexp.
(skip_python_tests): New function.
* lib/mi-support.exp (mi_skip_python_tests): New function.
* gdb.python/py-mi-objfile-gdb.py: New file.
* gdb.python/py-mi-objfile.c: New file.
* gdb.python/py-mi-objfile.exp: New file.
H.J. Lu [Tue, 18 Aug 2015 17:43:19 +0000 (10:43 -0700)]
Add another test for PR ld/18841
PR ld/18841
* ld-ifunc/ifunc.exp: Add another test for PR ld/18841.
* ld-ifunc/pr18841c.c: New file.
Sandra Loosemore [Tue, 18 Aug 2015 17:29:54 +0000 (10:29 -0700)]
Fix mis-parsing of hex register numbers in 'T' stop replies.
2015-08-18 Sandra Loosemore <sandra@codesourcery.com>
gdb/
* remote.c (strprefix): New.
(remote_parse_stop_reply): Use strprefix instead of strncmp
to ensure exact match of keyword.
H.J. Lu [Tue, 18 Aug 2015 16:47:59 +0000 (09:47 -0700)]
Return reloc_class_ifunc for reloc against IFUNC
elf_XXX_reloc_type_class should return reloc_class_ifunc for relocation
against STT_GNU_IFUNC symbol.
bfd/
PR ld/18841
* elf-bfd.h (elf_link_hash_table): Add dynsym.
* elf32-i386.c (elf_i386_reloc_type_class): Return
reloc_class_ifunc for relocation against STT_GNU_IFUNC symbol.
* elf64-x86-64.c (elf_x86_64_reloc_type_class): Likewise.
* elflink.c (_bfd_elf_link_create_dynamic_sections): Set dynsym.
(bfd_elf_size_dynsym_hash_dynstr): Use dynsym.
(elf_final_link_info): Remove dynsym_sec.
(elf_link_output_extsym): Replace dynsym_sec with dynsym.
(bfd_elf_final_link): Remove reference to dynsym_sec. Replace
dynsym_sec with dynsym.
ld/testsuite/
PR ld/18841
* ld-ifunc/ifunc.exp: Add a test for PR ld/18841.
* ld-ifunc/pr18841.out: New file.
* ld-ifunc/pr18841a.c: Likewise.
* ld-ifunc/pr18841b.c: Likewise.
Andrew Burgess [Tue, 18 Aug 2015 16:09:41 +0000 (17:09 +0100)]
gdb/doc: Fix build of 'info' manual.
In commit
18989b3c5642e2ba533e02737797dcf06134229b I broke the creation
of gdb's info manual; I added a new section without adding a suitable
menu entry.
This commit adds the missing menu entry and fixes the build of gdb's
info manual.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB Files): Add 'File Caching' menu entry.
Jiong Wang [Tue, 18 Aug 2015 15:50:56 +0000 (16:50 +0100)]
[AArch64] Cleanup TLS relocation types which don't go through GOT table
This patch done two types of cleanup:
* in aarch64_reloc_got_type and elfNN_aarch64_relocate_section
We don't need those redundant "case" check, as they can be merged
with the "default" which just "break".
* in elfNN_aarch64_gc_sweep_hook and elfNN_aarch64_check_relocs
All TLS local executable relocations and some local dynamic
relocations (those calculate module offset) actually don't need GOT
entry, so remove them from GOT entry counting.
2015-08-18 Jiong Wang <jiong.wang@arm.com>
bfd/
* elfnn-aarch64.c (aarch64_reloc_got_type): Delete useless check.
(elfNN_aarch64_relocate_section): Likewise.
(elfNN_aarch64_gc_sweep_hook): Likewise.
(elfNN_aarch64_check_relocs): Likewise.
Andrew Burgess [Mon, 13 Apr 2015 15:56:23 +0000 (16:56 +0100)]
gdb: Add debug tracing for bfd cache activity.
This patch adds a new debug flag bfd-cache, which when set to non-zero
produces debugging log messages relating to gdb's bfd cache.
gdb/ChangeLog:
* gdb_bfd.c (debug_bfd_cache): New variable.
(show_bfd_cache_debug): New function.
(gdb_bfd_open): Add debug logging.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
(_initialize_gdb_bfd): Add new set/show command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (File Caching): Document "set/show debug bfd-cache".
Andrew Burgess [Mon, 13 Apr 2015 15:31:21 +0000 (16:31 +0100)]
gdb: New maintenance command to disable bfd sharing.
In some rare maintainer cases it is desirable to be able to disable bfd
sharing. This patch adds new commands maintenance set/show commands for
bfd-sharing, allowing gdb's bfd cache to be turned off.
gdb/ChangeLog:
* gdb_bfd.c (bfd_sharing): New variable.
(show_bfd_sharing): New function.
(gdb_bfd_open): Check bfd_sharing variable.
(_initialize_gdb_bfd): Add new set/show command.
* NEWS: Mention new command.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Move documentation of "main
info bfds" to...
(File Caching): A New section. Outline bfd caching, and add new
description for "main set/show bfd-sharing".
Andrew Burgess [Mon, 13 Apr 2015 13:53:48 +0000 (14:53 +0100)]
gdb: Improve cache matching criteria for the bfd cache.
Within gdb open bfd objects are reused where possible if an attempt is
made to reopen a file that is already being debugged. To spot if the on
disc file has changed gdb currently examines the mtime of the file and
compares it to the mtime of the open bfd in the cache.
A problem exists when the on disc file is being rapidly regenerated, as
happens, for example, with automated testing. In some cases the file is
generated so quickly that the mtime appears not to change, while the on
disc file has changed.
This patch extends the bfd cache to also hold the file size of the file,
the inode of the file, and the device id of the file; gdb can then
compare filename, file size, mtime, inode, and device id to determine if
an existing bfd object can be reused.
gdb/ChangeLog:
* gdb_bfd.c (struct gdb_bfd_data): Add size, inode, and device id
field.
(struct gdb_bfd_cache_search): Likewise.
(eq_bfd): Compare the size, inode, and device id fields.
(gdb_bfd_open): Initialise the size, inode, and device id fields.
(gdb_bfd_ref): Likewise.
(gdb_bfd_unref): Likewise.
H.J. Lu [Tue, 18 Aug 2015 12:51:03 +0000 (05:51 -0700)]
Add output_type to bfd_link_info
The "shared" field in bfd_link_info is set for both DSO and and PIE.
There are separate fields for executable and relocatable outputs. This
patch adds an "output_type" field:
enum output_type
{
type_unknown = 0,
type_executable,
type_dll,
type_relocatable
};
and a "pic" field to bfd_link_info to replace shared, executable and
relocatable fields so that we can use the "output_type" field to check
for output type and the "pic" field check if output is PIC. Macros,
bfd_link_executable, bfd_link_dll, bfd_link_relocatable, bfd_link_pic
and bfd_link_pie, are provided to check for output features.
bfd/
* bfd/aoutx.h: Replace shared, executable, relocatable and pie
fields with bfd_link_executable, bfd_link_dll,
bfd_link_relocatable, bfd_link_pic and bfd_link_pie.
* bfd/bout.c: Likewise.
* bfd/coff-alpha.c: Likewise.
* bfd/coff-arm.c: Likewise.
* bfd/coff-i386.c: Likewise.
* bfd/coff-i960.c: Likewise.
* bfd/coff-m68k.c: Likewise.
* bfd/coff-mcore.c: Likewise.
* bfd/coff-mips.c: Likewise.
* bfd/coff-ppc.c: Likewise.
* bfd/coff-rs6000.c: Likewise.
* bfd/coff-sh.c: Likewise.
* bfd/coff-tic80.c: Likewise.
* bfd/coff-x86_64.c: Likewise.
* bfd/coff64-rs6000.c: Likewise.
* bfd/coffgen.c: Likewise.
* bfd/cofflink.c: Likewise.
* bfd/ecoff.c: Likewise.
* bfd/ecofflink.c: Likewise.
* bfd/elf-bfd.h: Likewise.
* bfd/elf-eh-frame.c: Likewise.
* bfd/elf-ifunc.c: Likewise.
* bfd/elf-m10200.c: Likewise.
* bfd/elf-m10300.c: Likewise.
* bfd/elf-s390-common.c: Likewise.
* bfd/elf-vxworks.c: Likewise.
* bfd/elf.c: Likewise.
* bfd/elf32-arm.c: Likewise.
* bfd/elf32-avr.c: Likewise.
* bfd/elf32-bfin.c: Likewise.
* bfd/elf32-cr16.c: Likewise.
* bfd/elf32-cr16c.c: Likewise.
* bfd/elf32-cris.c: Likewise.
* bfd/elf32-crx.c: Likewise.
* bfd/elf32-d10v.c: Likewise.
* bfd/elf32-dlx.c: Likewise.
* bfd/elf32-epiphany.c: Likewise.
* bfd/elf32-fr30.c: Likewise.
* bfd/elf32-frv.c: Likewise.
* bfd/elf32-ft32.c: Likewise.
* bfd/elf32-h8300.c: Likewise.
* bfd/elf32-hppa.c: Likewise.
* bfd/elf32-i370.c: Likewise.
* bfd/elf32-i386.c: Likewise.
* bfd/elf32-i860.c: Likewise.
* bfd/elf32-ip2k.c: Likewise.
* bfd/elf32-iq2000.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-m32c.c: Likewise.
* bfd/elf32-m32r.c: Likewise.
* bfd/elf32-m68hc11.c: Likewise.
* bfd/elf32-m68hc1x.c: Likewise.
* bfd/elf32-m68k.c: Likewise.
* bfd/elf32-mcore.c: Likewise.
* bfd/elf32-mep.c: Likewise.
* bfd/elf32-metag.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-moxie.c: Likewise.
* bfd/elf32-msp430.c: Likewise.
* bfd/elf32-mt.c: Likewise.
* bfd/elf32-nds32.c: Likewise.
* bfd/elf32-nios2.c: Likewise.
* bfd/elf32-or1k.c: Likewise.
* bfd/elf32-ppc.c: Likewise.
* bfd/elf32-rl78.c: Likewise.
* bfd/elf32-rx.c: Likewise.
* bfd/elf32-s390.c: Likewise.
* bfd/elf32-score.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-sh-symbian.c: Likewise.
* bfd/elf32-sh.c: Likewise.
* bfd/elf32-sh64.c: Likewise.
* bfd/elf32-spu.c: Likewise.
* bfd/elf32-tic6x.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elf32-v850.c: Likewise.
* bfd/elf32-vax.c: Likewise.
* bfd/elf32-visium.c: Likewise.
* bfd/elf32-xc16x.c: Likewise.
* bfd/elf32-xstormy16.c: Likewise.
* bfd/elf32-xtensa.c: Likewise.
* bfd/elf64-alpha.c: Likewise.
* bfd/elf64-hppa.c: Likewise.
* bfd/elf64-ia64-vms.c: Likewise.
* bfd/elf64-mmix.c: Likewise.
* bfd/elf64-ppc.c: Likewise.
* bfd/elf64-s390.c: Likewise.
* bfd/elf64-sh64.c: Likewise.
* bfd/elf64-x86-64.c: Likewise.
* bfd/elflink.c: Likewise.
* bfd/elfnn-aarch64.c: Likewise.
* bfd/elfnn-ia64.c: Likewise.
* bfd/elfxx-mips.c: Likewise.
* bfd/elfxx-sparc.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/i386linux.c: Likewise.
* bfd/linker.c: Likewise.
* bfd/m68klinux.c: Likewise.
* bfd/pdp11.c: Likewise.
* bfd/pe-mips.c: Likewise.
* bfd/peXXigen.c: Likewise.
* bfd/reloc.c: Likewise.
* bfd/reloc16.c: Likewise.
* bfd/sparclinux.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/vms-alpha.c: Likewise.
* bfd/xcofflink.c: Likewise.
include/
* include/bfdlink.h (output_type): New enum.
(bfd_link_executable): New macro.
(bfd_link_dll): Likewise.
(bfd_link_relocatable): Likewise.
(bfd_link_pic): Likewise.
(bfd_link_pie): Likewise.
(bfd_link_info): Remove shared, executable, pie and relocatable.
Add output_type and pic.
ld/
* ld/ldctor.c: Replace shared, executable, relocatable and pie
fields with bfd_link_executable, bfd_link_dll,
bfd_link_relocatable, bfd_link_pic and bfd_link_pie.
* ld/ldemul.c: Likewise.
* ld/ldfile.c: Likewise.
* ld/ldlang.c: Likewise.
* ld/ldmain.c: Likewise.
* ld/ldwrite.c: Likewise.
* ld/lexsup.c: Likewise.
* ld/pe-dll.c: Likewise.
* ld/plugin.c: Likewise.
* ld/emultempl/aarch64elf.em: Likewise.
* ld/emultempl/aix.em: Likewise.
* ld/emultempl/alphaelf.em: Likewise.
* ld/emultempl/armcoff.em: Likewise.
* ld/emultempl/armelf.em: Likewise.
* ld/emultempl/avrelf.em: Likewise.
* ld/emultempl/beos.em: Likewise.
* ld/emultempl/cr16elf.em: Likewise.
* ld/emultempl/elf-generic.em: Likewise.
* ld/emultempl/elf32.em: Likewise.
* ld/emultempl/genelf.em: Likewise.
* ld/emultempl/generic.em: Likewise.
* ld/emultempl/gld960.em: Likewise.
* ld/emultempl/gld960c.em: Likewise.
* ld/emultempl/hppaelf.em: Likewise.
* ld/emultempl/irix.em: Likewise.
* ld/emultempl/linux.em: Likewise.
* ld/emultempl/lnk960.em: Likewise.
* ld/emultempl/m68hc1xelf.em: Likewise.
* ld/emultempl/m68kcoff.em: Likewise.
* ld/emultempl/m68kelf.em: Likewise.
* ld/emultempl/metagelf.em: Likewise.
* ld/emultempl/mipself.em: Likewise.
* ld/emultempl/mmo.em: Likewise.
* ld/emultempl/msp430.em: Likewise.
* ld/emultempl/nds32elf.em: Likewise.
* ld/emultempl/needrelax.em: Likewise.
* ld/emultempl/nios2elf.em: Likewise.
* ld/emultempl/pe.em: Likewise.
* ld/emultempl/pep.em: Likewise.
* ld/emultempl/ppc32elf.em: Likewise.
* ld/emultempl/ppc64elf.em: Likewise.
* ld/emultempl/sh64elf.em: Likewise.
* ld/emultempl/solaris2.em: Likewise.
* ld/emultempl/spuelf.em: Likewise.
* ld/emultempl/sunos.em: Likewise.
* ld/emultempl/tic6xdsbt.em: Likewise.
* ld/emultempl/ticoff.em: Likewise.
* ld/emultempl/v850elf.em: Likewise.
* ld/emultempl/vms.em: Likewise.
* ld/emultempl/vxworks.em: Likewise.
Pedro Alves [Tue, 18 Aug 2015 10:04:30 +0000 (11:04 +0100)]
x86/Linux: disable all-stop on top of non-stop
Markus reported that ASNS breaks target record-btrace. In particular,
the gdb.btrace/multi-thread-step.exp test fails (both with BTS and PT
tracing) with a crash in py-inferior.c:
Program received signal SIGSEGV, Segmentation fault.
0x00000000006aa40d in add_thread_object (tp=0x27d32d0)
at /users/mmetzger/team/gdb/git/gdb/python/py-inferior.c:337
337 entry->next = inf_obj->threads;
My machine doesn't support BTS nor PT, so I missed this...
Disabling ASNS temporarily on x86 until this is addressed.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-18 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops
target implements to_always_non_stop_p, call it.
* x86-linux-nat.c (x86_linux_always_non_stop_p): New function.
(x86_linux_create_target): Install it as to_always_non_stop_p
method.
Alan Modra [Tue, 18 Aug 2015 07:14:48 +0000 (16:44 +0930)]
Use $SED in bfd Makefile
PR 18667
* Makefile.am: Use $(SED) in place of sed throughout.
* Makefile.in: Regenerate.
Alan Modra [Tue, 18 Aug 2015 07:13:18 +0000 (16:43 +0930)]
PPC64: Allow .TOC. in linker script to override backend calculated value
bfd/
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Don't redefine .TOC.
if already defined, and set linker_def.
(ppc64_elf_set_toc): Use .TOC. value if defined other than by
the backend.
ld/
* ldexp.c (exp_fold_tree_1): Clear linker_def on symbol assignment.
GDB Administrator [Tue, 18 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Doug Evans [Mon, 17 Aug 2015 20:07:11 +0000 (13:07 -0700)]
ui-out.c (default_ui_out_impl): Add comment.
gdb/ChangeLog:
* ui-out.c (default_ui_out_impl): Add comment.
Iain Buclaw [Mon, 17 Aug 2015 19:45:42 +0000 (21:45 +0200)]
[D] Implement looking up members of D enums.
In D, all named enums are explicitly scoped (the C++ equivalent of enum class)
so they should be handled as such in the language-specific symbol lookup
routines. However so as to support D compilers that don't emit enums as
DW_AT_enum_class, need to make sure that appropriate checks for
TYPE_DECLARED_CLASS are done.
gdb/ChangeLog
* d-exp.y (type_aggregate_p): New function.
(PrimaryExpression : TypeExp '.' IdentifierExp): Use it.
(classify_inner_name): Likewise.
* d-namespace.c (d_lookup_nested_symbol): Handle TYPE_CODE_ENUM.
Keith Seitz [Thu, 13 Aug 2015 18:56:50 +0000 (11:56 -0700)]
Move strace -m/explicit location test to strace.exp
One of the build slaves shows this error running explicit.exp:
(gdb) strace -m gdbfoobarbaz
Remote failure reply: E.In-process agent library not loaded in process.
Fast and static tracepoints unavailable.
(gdb) FAIL: gdb.linespec/explicit.exp: strace -m gdbfoobarbaz
There are two big problems with this test:
1) The expected output is actually not what the test is meant to test for.
2) This test should really only run where it is supported.
This is most easily fixed by moving the test to gdb.trace/strace.exp.
gdb/testsuite/ChangeLog
* gdb.linespec/explicit.exp: Move strace test from here ...
* gdb.trace/strace.exp: ... to here.
Alan Modra [Mon, 17 Aug 2015 02:31:58 +0000 (12:01 +0930)]
Regen binutils/configure
Looks like previous regen wasn't using current sources.
* configure: Regenerate.
Alan Modra [Mon, 17 Aug 2015 02:21:44 +0000 (11:51 +0930)]
Trailing space in opcodes/ generated files
HJ recently removed trailing space in binutils files, but unfortunately
they return when regenerating files in opcodes. This fixes the regen
process.
* cgen.sh: Trim trailing space from cgen output.
* ia64-gen.c (print_dependency_table): Don't generate trailing space.
(print_dis_table): Likewise.
* opc2c.c (dump_lines): Likewise.
(orig_filename): Warning fix.
* ia64-asmtab.c: Regenerate.
GDB Administrator [Mon, 17 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sun, 16 Aug 2015 23:35:42 +0000 (09:05 +0930)]
Rationalize ARM .align
* gas/config/tc-arm.c (s_align): Delete.
(md_pseudo_table): Use s_align_ptwo for "align".
* gas/config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
* read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
Doug Evans [Sun, 16 Aug 2015 05:08:47 +0000 (22:08 -0700)]
psymtab.c (add_psymbol_to_bcache): Remove "val" arg.
gdb/ChangeLog:
* psymtab.c (add_psymbol_to_bcache): Remove "val" arg. All callers
updated.
(add_psymbol_to_list): Ditto.
GDB Administrator [Sun, 16 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Doug Evans [Sat, 15 Aug 2015 23:46:20 +0000 (16:46 -0700)]
Add end_psymtab_common, have all debug info readers call it.
gdb/ChangeLog:
* dbxread.c (dbx_end_psymtab): Renamed from end_psymtab. All callers
updated. Call end_psymtab_common.
* dwarf2read.c (process_psymtab_comp_unit_reader): Call
end_psymtab_common.
(build_type_psymtabs_reader): Ditto.
* psympriv.h (sort_pst_symbols): Delete.
(end_psymtab_common): Declare.
* psymtab.c (sort_pst_symbols): Make static.
(end_psymtab_common): New function.
* xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.
Doug Evans [Sat, 15 Aug 2015 23:25:53 +0000 (16:25 -0700)]
Use macros for some enum bit field sizes.
gdb/ChangeLog:
* defs.h (LANGUAGE_BITS): Define.
* psympriv.h (partial_symbol) <domain>: Use SYMBOL_DOMAIN_BITS.
(partial_symbol) <aclass>: Use SYMBOL_ACLASS_BITS.
* symtab.h (general_symbol_info> <language>: Usage LANGUAGE_BITS.
(minimal_symbol_type): Add nr_minsym_types.
(MINSYM_TYPE_BITS): Define.
(minimal_symbol) <type>: Use MINSYM_TYPE_BITS.
(domain_enum_tag): Add NR_DOMAINS.
(SYMBOL_DOMAIN_BITS): Change from 4 to 3.
(SYMBOL_ACLASS_BITS): Define from 6 to 5.
Doug Evans [Sat, 15 Aug 2015 22:51:00 +0000 (15:51 -0700)]
objfiles.h,psympriv.h,psymtab.c: Whitespace.
gdb/ChangeLog:
* objfiles.h: Whitespace cleanup.
* psympriv.h: Whitespace cleanup.
* psymtab.c: Whitespace/coding convention cleanup.
Patrick Palka [Tue, 28 Jul 2015 19:00:58 +0000 (15:00 -0400)]
Fix invoking "[kill|detach] inferiors" on inferiors that are not running
Invoking either of the above commands on an inferior that's not running
triggers the following assert failure:
.../binutils-gdb/gdb/thread.c:514: internal-error: any_thread_of_process: Assertion `pid != 0' failed.
The fix is straightforward. This patch also adds a test to check the
basic functionality of these commands, along with testing this fix in
particular. Tested on x86_64 Linux.
gdb/ChangeLog:
* inferior.c (detach_inferior_command): Don't call
any_thread_of_process when pid is 0.
(kill_inferior_command): Likewise.
gdb/testsuite/ChangeLog:
* gdb.base/kill-detach-inferiors-cmd.exp: New test file.
* gdb.base/kill-detach-inferiors-cmd.c: New test file.
Doug Evans [Sat, 15 Aug 2015 06:29:04 +0000 (23:29 -0700)]
perftest/utils.py (select_file): Kill any existing inferior before selecting a new file.
gdb/testsuite/ChangeLog:
* gdb.perf/lib/perftest/utils.py (select_file): Kill any existing
inferior before selecting a new file.
Doug Evans [Sat, 15 Aug 2015 04:45:54 +0000 (21:45 -0700)]
New /s modifier for the disassemble command.
The "source centric" /m option to the disassemble command is often
unhelpful, e.g., in the presence of optimized code.
This patch adds a /s modifier that is better.
For one, /m only prints instructions from the originating source file,
leaving out instructions from e.g., inlined functions from other files.
gdb/ChangeLog:
PR gdb/11833
* NEWS: Document new /s modifier for the disassemble command.
* cli/cli-cmds.c (disassemble_command): Add support for /s.
(_initialize_cli_cmds): Update online docs of disassemble command.
* disasm.c: #include "source.h".
(struct deprecated_dis_line_entry): Renamed from dis_line_entry.
All uses updated.
(dis_line_entry): New struct.
(hash_dis_line_entry, eq_dis_line_entry): New functions.
(allocate_dis_line_table): New functions.
(maybe_add_dis_line_entry, line_has_code_p): New functions.
(dump_insns): New arg end_pc. All callers updated.
(do_mixed_source_and_assembly_deprecated): Renamed from
do_mixed_source_and_assembly. All callers updated.
(do_mixed_source_and_assembly): New function.
(gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
* disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
DISASSEMBLY_SOURCE. All uses updated.
(DISASSEMBLY_SOURCE): New macro.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
gdb/doc/ChangeLog:
* gdb.texinfo (Machine Code): Update docs for mixed source/assembly
disassembly.
(GDB/MI Data Manipulation): Update docs for new disassembly modes.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-disassemble.exp: Update.
* gdb.base/disasm-optim.S: New file.
* gdb.base/disasm-optim.c: New file.
* gdb.base/disasm-optim.h: New file.
* gdb.base/disasm-optim.exp: New file.
Keith Seitz [Sat, 15 Aug 2015 00:28:11 +0000 (17:28 -0700)]
Rename `typename' in d-exp.y to avoid C++ reserved word
A recent patch introduced a variable named `typename' into d-exp.y,
and one of the --enable-with-cxx build slaves consequently failed to compile
this. This patch simply adds an underscore into the name to avoid the
reserved word.
gdb/ChangeLog
* d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Rename
`typename' to `type_name' to avoid C++ reserved word.
GDB Administrator [Sat, 15 Aug 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Keith Seitz [Fri, 14 Aug 2015 22:00:04 +0000 (15:00 -0700)]
Rename location accessor macro parameters to silence ARI
The locations patch I recently committed contains macro definitions
such as:
This causes an ARI error to be emitted by the server ("Do not use PTR, ISO C
90 implies `void *'"). While this ARI error is bogus in this context,
it is just easiest to squash the error completely by renaming the macro
parameters.
gdb/ChangeLog
* location.c (EL_TYPE, EL_LINESPEC, EL_PROBE, EL_ADDRESS)
(EL_EXPLICIT, EL_STRING): Change macro parameter to "P" to
silence ARI errors.
Keith Seitz [Fri, 14 Aug 2015 21:54:37 +0000 (14:54 -0700)]
Add missing ChangeLog entry for previous commit.
Keith Seitz [Fri, 14 Aug 2015 20:45:06 +0000 (13:45 -0700)]
mi_make_breakpoint: add "evaluated-by" option
For some time now, GDB has permitted target-side evaluation of
breakpoint conditions. On targets that support this feature, GDB
may output an "evaluated-by" field into the breakpoint reply.
This patch adds handling for this option, and outputs a default
pattern to optionally recognize (and ignore) this pattern in the
reply.
gdb/testsuite/ChangeLog
* lib/mi-support.exp (mi_make_breakpoint): Add option/handling for
"evaluated-by".
Iain Buclaw [Fri, 14 Aug 2015 19:25:17 +0000 (21:25 +0200)]
Fix ARI warnings in d-exp.y
This fixes four ARI warnings found in d-exp.y.
This is comprised of three uses of the && or || at the end of a line, and one
use of sprintf.
gdb/ChangeLog
* d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Use
xstrprintf instead of malloc and sprintf.
(PrimaryExpression : IdentifierExp): Avoid operator at end of line.
(lex_one_token): Likewise.
Matthew Fortune [Thu, 11 Jun 2015 09:37:31 +0000 (10:37 +0100)]
Add support for DT_MIPS_RLD_MAP_REL.
This tag allows debugging of MIPS position independent executables
and provides access to shared library information.
gdb/gdbserver/
* linux-low.c (get_r_debug): Handle DT_MIPS_RLD_MAP_REL.
gdb/
* solib-svr4.c (read_program_header): Add base_addr argument to
report the runtime address of the segment.
(find_program_interpreter): Update read_program_header call to pass
a NULL pointer for the new argument.
(scan_dyntag): Add ptr_addr argument to report the runtime address
of the tag payload.
(scan_dyntag_auxv): Likewise and use thew new base_addr argument of
read_program_header to get the base address of the dynamic segment.
(elf_locate_base): Update uses of scan_dyntag, scan_dyntag_auxv and
read_program_header.
(elf_locate_base): Scan for and handle DT_MIPS_RLD_MAP_REL.
Matthew Fortune [Fri, 14 Aug 2015 12:07:23 +0000 (13:07 +0100)]
Add myself to gdb MAINTAINERS
gdb/
* MAINTAINERS (Write After Approval): Add Matthew Fortune.
Alan Modra [Wed, 12 Aug 2015 09:37:26 +0000 (19:07 +0930)]
Revert "Fix encoding or OpenRisk1000 PC relative relocations."
This reverts commit
dbac553d28887561e3f154654ec8e70195d89943.
PR ld/18759
* elf32-or1k.c: Revert 2015-08-11 change.
GDB Administrator [Fri, 14 Aug 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Iain Buclaw [Thu, 13 Aug 2015 19:35:09 +0000 (21:35 +0200)]
[D] Move classification of symbols from the grammar to the lexer.
This makes it so that alternating '.' and identifier tokens are resolved to
symbols as early as possible, which should all the addition of D properties -
such as EXP.sizeof and EXP.typeof - without the shift/reduce conflicts that
would occur in the current parsing strategy.
gdb/ChangeLog
* d-exp.y (%union): Add voidval.
(%token): Add UNKNOWN_NAME as a token to represent an unclassified
name in the lexing stage.
(PostfixExpression): Move symbol completion handling in grammar here
from PrimaryExpression.
(PrimaryExpression): Move routines to handle resolving identifier
tokens in the grammar here from push_expression_name.
(IdentifierExp): Remove the handling of alternating '.' and identifier
tokens.
(TypeExp): Allow TypeExp to be wrapped in parenthesis in the grammar.
(BasicType): Remove C-style typename rules.
(d_type_from_name, d_module_from_name, push_variable)
(push_fieldnames, push_type_name, push_module_name)
(push_expression_name): Remove.
(lex_one_token): Rename from yylex. Replace pstate with par_state.
(token_and_value): New type.
(token_fifo, popping, name_obstack): New globals.
(classify_name): New function.
(classify_inner_name): Likewise.
(yylex): Likewise.
(d_parse): Initialize token_fifo, popping and name_obstack.
Iain Buclaw [Thu, 13 Aug 2015 18:34:15 +0000 (20:34 +0200)]
[D] Support looking up symbols in the current and imported modules.
In D, there is the notion of modules, and importing from one to the other,
whether it is a basic, selective or renamed import declaration.
module A;
import X;
void foo() {
import Y : bar;
}
If the compiler emits DW_TAG_imported_declaration at the appropriate locations,
then we can make use of what gdb stores in using_direct when performing
nonlocal symbol lookups.
gdb/ChangeLog
* Makefile.in (SFILES): Add d-namespace.c.
(COMMON_OBS): Add d-namespace.o.
* d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
la_lookup_symbol_nonlocal callback function pointer.
* d-lang.h (d_lookup_symbol_nonlocal): New declaration.
(d_lookup_nested_symbol): New declaration.
* d-namespace.c: New file.
Joel Brobecker [Wed, 12 Aug 2015 20:40:54 +0000 (13:40 -0700)]
gdb.base/dso2dso.exp: Improve testcase documentation.
gdb/testsuite/ChangeLog:
* gdb.base/dso2dso.exp: Improve the testcase's documentation.
Pedro Alves [Thu, 13 Aug 2015 17:56:42 +0000 (18:56 +0100)]
Fix Python frame unwinder issue caught by Valgrind
Valgrind shows:
==17026== Invalid write of size 8
==17026== at 0x54AA80: pending_frame_invalidate (py-unwind.c:477)
==17026== by 0x5AB934: do_my_cleanups (cleanups.c:155)
==17026== by 0x5AB9AF: do_cleanups (cleanups.c:177)
==17026== by 0x54B009: pyuw_sniffer (py-unwind.c:606)
==17026== by 0x755DAC: frame_unwind_try_unwinder (frame-unwind.c:105)
==17026== by 0x755EEE: frame_unwind_find_by_frame (frame-unwind.c:160)
==17026== by 0x750FFA: compute_frame_id (frame.c:454)
==17026== by 0x753BD6: get_prev_frame_if_no_cycle (frame.c:1781)
==17026== by 0x754292: get_prev_frame_always_1 (frame.c:1955)
==17026== by 0x7542DA: get_prev_frame_always (frame.c:1971)
==17026== by 0x7547BE: get_prev_frame (frame.c:2213)
==17026== by 0x7532BD: unwind_to_current_frame (frame.c:1450)
==17026== Address 0xd27b570 is 16 bytes inside a block of size 32 free'd
==17026== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17026== by 0x54B276: gdb_Py_DECREF (python-internal.h:185)
==17026== by 0x54B298: py_decref (py-utils.c:34)
==17026== by 0x5AB934: do_my_cleanups (cleanups.c:155)
==17026== by 0x5AB9AF: do_cleanups (cleanups.c:177)
==17026== by 0x54B009: pyuw_sniffer (py-unwind.c:606)
==17026== by 0x755DAC: frame_unwind_try_unwinder (frame-unwind.c:105)
==17026== by 0x755EEE: frame_unwind_find_by_frame (frame-unwind.c:160)
==17026== by 0x750FFA: compute_frame_id (frame.c:454)
==17026== by 0x753BD6: get_prev_frame_if_no_cycle (frame.c:1781)
==17026== by 0x754292: get_prev_frame_always_1 (frame.c:1955)
==17026== by 0x7542DA: get_prev_frame_always (frame.c:1971)
==17026==
Simply invalidate the object before releasing it.
gdb/ChangeLog:
2015-08-13 Pedro Alves <palves@redhat.com>
* python/py-unwind.c (pyuw_sniffer): Install the invalidate
cleanup after the decref cleanup, not before.
Keith Seitz [Thu, 13 Aug 2015 16:48:12 +0000 (09:48 -0700)]
Mass rename `explicit' -> `explicit_loc'.
BuildBot reminded me that "explicit" is a reserved keyword in C++.
This patch simply renames all the (illegal) uses of "explicit". This should
fix the build errors with --enable-build-with-cxx bots.
gdb/ChangeLog
* break-catch-throw.c (re_set_exception_catchpoint) Rename
reserved C++ keyword "explicit" to "explicit_loc".
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_static_tracepoint):
Rename reserved C++ keyword "explicit" to "explicit_loc".
* completer.c (collect_explicit_location_matches)
(explicit_location_completer): Rename reserved C++ keyword
"explicit" to "explicit_loc".
* linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
(canonicalize_linespec, create_sals_line_offset)
(convert_linespec_to_sals, convert_explicit_location_to_sals)
(event_location_to_sals, decode_objc): Rename reserved C++ keyword
"explicit" to "explicit_loc".
* location.c (struct event_location) <explicit>: Rename to
"explicit_loc".
(initialize_explicit_location, new_explicit_location)
(explicit_location_to_string_internal, explicit_location_to_linespec):
Rename reserved C++ keyword "explicit" to "explicit_loc".
* location.h (explicit_location_to_string)
(explicit_location_to_linespec, initialize_explicit_location)
(new_explicit_location): Rename reserved C++ keyword "explicit"
to "explicit_loc".
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
keyword "explicit" to "explicit_loc".
H.J. Lu [Thu, 13 Aug 2015 11:31:38 +0000 (04:31 -0700)]
Issue an error for read-only segment with dynamic IFUNC relocations
To load an ELF binary with DT_TEXTREL tag, the dynamic linker calls
__mprotect on the read-only segment with PROT_READ|PROT_WRITE before
applying dynamic relocation. It leads to segfault when performing
IFUNC relocations since the read-only segment has no execute permission.
This patch changes x86 linker to issue an error for read-only segment
with dynamic IFUNC relocations. Other backends with IFUNC support
may need a similar change.
bfd/
PR ld/18801
* elf32-i386.c (elf_i386_size_dynamic_sections): Issue an error
for read-only segment with dynamic IFUNC relocations.
* elf64-x86-64.c (elf_x86_64_size_dynamic_sections): Likewise.
ld/testsuite/
PR ld/18801
* ld-i386/i386.exp: Run pr18801.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr18801.d: New file.
* ld-i386/pr18801.s: Likewise.
* ld-x86-64/pr18801.d: Likewise.
* ld-x86-64/pr18801.s: Likewise.
Andre Vieira [Thu, 13 Aug 2015 10:39:08 +0000 (11:39 +0100)]
Fixes for unpredictable nops and 26-bit versions of teq,tst,cmn,cmp.
opcodes * arm-dis.c (print_insn_arm): Disassembling for all targets V6
and higher with ARM instruction set will now mark the 26-bit
versions of teq,tst,cmn and cmp as UNPREDICTABLE.
(arm_opcodes): Fix for unpredictable nop being recognized as a teq.
test * gas/arm/nops.d: New.
* gas/arm/nops.s: New.
* gas/arm/inst.d: Changed expectation file for 26-bit teq,
tst, cmn and cmp.
H.J. Lu [Thu, 13 Aug 2015 09:48:55 +0000 (02:48 -0700)]
Add ChangeLog for check_ifunc_attribute_available
Pierre-Marie de Rodat [Thu, 13 Aug 2015 07:54:09 +0000 (09:54 +0200)]
Add ChangeLog entries for the previous commit
Pierre-Marie de Rodat [Wed, 22 Jul 2015 13:30:57 +0000 (15:30 +0200)]
[Ada] Add support for subprogram renamings
Consider the following declaration:
function Foo (I : Integer) return Integer renames Pack.Bar;
As Foo is not materialized as a routine whose name is derived from Foo,
GDB currently cannot use it:
(gdb) print foo(0)
No definition of "foo" in current context.
However, compilers can emit DW_TAG_imported_declaration in order to
materialize the fact that Foo is actually another name for Pack.Bar.
This commit enhances the DWARF reader to record global renamings (it
used to put global ones in a static block) and enhances the Ada engine
to leverage this information during symbol lookup.
gdb/ChangeLog:
* ada-lang.c: Include namespace.h
(aux_add_nonlocal_symbols): Fix a function name in comment.
(ada_add_block_renamings): New.
(add_nonlocal_symbols): Add global renamings handling.
(ada_lookup_symbol_list_worker): Move the symbol lookup part
to...
(ada_add_all_symbols): ... this new function.
(ada_add_block_symbols): Try to match the input name against the
"using directives list", perform a recursive symbol lookup on
the matched declarations.
* block.h (struct block): Move the_namespace to top-level as
namespace_info. Remove the language_specific field.
(BLOCK_NAMESPACE): Update access to the namespace_info field.
* buildsym.h (using_directives): Rename into...
(local_using_directives): ... this.
(global_using_directives): New.
(struct context_stack): Rename the using_directives field into
local_using_directives.
* buildsym.c (finish_block_internal): Deal with the proper
using directives repository (local or global).
(prepare_for_building): Reset local_using_directives. Assert
that there is no pending global using directive.
(reset_symtab_globals): Reset global_using_directives and
local_using_directives.
(end_symtab_get_static_block): Don't ignore symtabs that have
only using directives.
(push_context): Update references to local_using_directives.
(buildsym_init): Do not reset using_directives.
* cp-support.c: Include namespace.h.
* cp-support.h (struct using_direct): Move to namespace.h.
(cp_add_using_directives): Move to namespace.h.
* cp-namespace.c: Include namespace.h
(cp_add_using_directive): Move to namespace.c, rename it to
add_using_directive, add a "using_directives" argument and use
it as the pending using directives repository. All callers
updated.
* dwarf2read.c (using_directives): New.
(read_import_statement): Call using_directives.
(read_func_scope): Update references to local_using_directives.
(read_lexical_block_scope): Likewise.
(read_namespace): Update the heading comment, call
using_directives.
* namespace.h: New file.
* namespace.c: New file.
* Makefile.in (SFILES): Add namespace.c.
(COMMON_OBS): Add namespace.o
gdb/testsuite/ChangeLog:
* gdb.ada/fun_renaming.exp: New testcase.
* gdb.ada/fun_renaming/fun_renaming.adb: New file.
* gdb.ada/fun_renaming/pack.adb: New file.
* gdb.ada/fun_renaming/pack.ads: New file.
Tested on x86_64-linux. Support for this in GCC is in the pipeline: see
<https://gcc.gnu.org/ml/gcc-patches/2015-07/msg02166.html>.
Alan Modra [Thu, 13 Aug 2015 06:27:15 +0000 (15:57 +0930)]
gas 0f handling
_start:
.byte 0f-_start
0:
Fixes
..:2: Error: floating point number invalid
..:2: Error: junk at end of line, first unrecognized character is `_'
* expr.c (operand): Rewrite handling of operands starting with "0f".
If atof_generic only parses "-" or "+", treat as expression.
projects / binutils-gdb.git / log