git.libre-soc.org Git - buildroot.git/log

pkg-download: use raw basename for repo archiving to remove host- prefix

For packages that use a version control repository rather than a pre-made
tarball, the directory prefix used inside the tarball is currently
FOO_BASE_NAME, which can be 'foo' or 'host-foo'.

This means that the hash of such tarball will be different for target and
host packages, even though the contents are exactly the same. Hence, if the
hash file is created based on 'foo', and later a fresh build is made where
'host-foo' happens to be built before 'foo' (with a different config, for
example), the hash will be detected as incorrect and a new download is
started.

This problem does not affect many packages/users, due to the number of
conditions to be met:
- the package should be available for target _and_ host
- the package needs to use a VCS download method, e.g. git, hg, svn, ...
  This does not include standard github downloads, which download a pre-made
  archive.
- there should be a hash file containing the hash of the downloaded archive.
  Since normally there is no hash file for packages with sources coming from
  a version control system, this restricts even further. Some examples of
  packages in this category that do have a hash file (but not necessarily
  match the earlier conditions): expedite, vexpress-firmware, squashfs, ...
- the archive needs to be stored in a 'primary site' after initial archiving
  and thus be downloaded later using a non-version-controlled method, like
  wget or scp. This is because the version control download methods do not
  receive a '-H' parameter pointing to the hash file and thus no hashes are
  checked at all even if the file is present.

While packages matching the third condition could be considered to be 'wrong'
and need to be fixed, it does actually makes sense to have a hash file for
packages from version control, in particular if they are stored in a
primary site as mentioned in the last condition.

Regardless of any different opinions on the previous paragraph, it is also
not conceptually correct that a tarball of a package source can contain a
Buildroot-specific directory prefix 'host-'.  Therefore, use
FOO_RAW_BASE_NAME instead of FOO_BASE_NAME when calling the dl-wrapper.

Example test scenario that exhibits the problem:
$ rm -rf /tmp/dl dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz
$ make qemu_x86_64_defconfig
$ make host-squashfs-dirclean host-squashfs-source
$ mkdir /tmp/dl
$ mv dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz /tmp/dl/
$ sed -i -e 's,BR2_PRIMARY_SITE=.*,BR2_PRIMARY_SITE="file:///tmp/dl",' \
         -e '/BR2_PRIMARY_SITE/aBR2_PRIMARY_SITE_ONLY=y'  .config
$ make host-squashfs-dirclean host-squashfs-source

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wireshark: fix kconfig dependencies

Commit fa6feff (wireshark: needs the qt5tools lrelease utility)
introduced a circular dependency chain in Kconfig:

    package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
    package/qt5/qt5base/Config.in:118:      symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
    package/qt5/qt5tools/Config.in:19:      symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
    package/qt5/qt5tools/Config.in:1:       symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
    package/qt5/qt5base/Config.in:131:      symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
    package/qt5/qt5x11extras/Config.in:1:   symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
    package/qt5/qt5base/Config.in:186:      symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI

Fix that by dropping the select on the Qt5Tools, and introduce an
intermediate kconfig-level variable to represent the new condition, to
simplify the .mk file.

That would make the condition for enabling/disabling the GUI to be a
little bit more complex by adding yet another (long-ish) variable.

So we also introduce an intermediate kconfig-level variable that
represent the condition to enable the GUI.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: don't overwrite WIRESHARK_CONF_ENV

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.8.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 7, 8}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hdparm: bump to version 9.50

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iw: bump to version 4.9

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgpgme: bump to version 1.7.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website: add Free Electrons as a current sponsor

Free Electrons sponsored the Buildroot Developers Meeting at ELCE 2016
in Berlin by making a donation to IN-Berlin, the organization who hosted
the 3-day event.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website: update Free Electrons logo

This commit updates the Free Electrons logo of the Buildroot website to
the new logo of the company.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: use BR2_TOOLCHAIN_HAS_LIBATOMIC

While fixing
http://autobuild.buildroot.net/results/d95/d9572bcafc1776eebe88bbcaf031a05cd6ee4b23/
by using http://patchwork.ozlabs.org/patch/674337/ the build stopped at
a later stage with

/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_add_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_or_1'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_compare_exchange_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_exchange_1'
collect2: error: ld returned 1 exit status

so libatomic must be pulled in if necessary.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: backport upstream patches to fix compat function for static_assert

Fixes
http://autobuild.buildroot.net/results/3b9/3b9d15f226057706c185270788050dace7b7b535/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: renumber patch 0008 -> 0009

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: fix scanpypi path typos

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openswan: remove duplicate word toolchain from comment

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

get-developers: use --cc instead of --to for developers

Output of get-developers script in our manual uses --cc for developers,
but actual output of get-developers script uses --to. This patch makes
code consistent with documentation, by using --cc for developers.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

motion: fix postgresql support

The commandline paramter to enable/disable postgresql support is
called '--with-pgsql/--without-pgsql' and not '--with-postgresql/
--without-postgresql'.

Fixes [1] in case postgresql development files are installed on the host:

  checking for PostgreSQL... testing
  checking autodect pgsql headers... yes /usr/include/postgresql
  checking autodect pgsql libs... /usr/lib64
  checking for PQconnectStart in -lpq... no
  configure: error: PostgreSQL support can't build without PostgreSQL libraries

[1] http://autobuild.buildroot.net/results/749/7497730da2affffe0e5b9b790081de10c269f416

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add entry for inadyn

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

inadyn: bump to version 2.0

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

MIPS: add support for M6201 cores

-march=m6201 is not yet supported in GCC upstream, so disabling all
versions when selecting this core.

Note that M6201 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for M6201 as
well.

The external Codescape IMG GNU Linux Toolchain has support for this
core.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usbredir: improve license description

For consistency use 'libraries' and 'program' as component names and
adjust license string for readability when we conditionally specify
license for server program.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dtc: update legal info

library libdtc is dual licensed under BSD-2c or GPLv2+ and dtc programs
are licensed under GPLv2+.

This patch annotates licenses with components and uses correct format to
specify dual licensing that is separating licenses with 'or' keyword
instead of '/'.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kmod: annotate licenses with components

library libkmod.so is licensed under LGPLv2.1+ and kmod tools are
licensed under GPLv2+.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: document both user-facing br2-external variables

While BR2_EXTERNAL_<NAME>_PATH was already documented, it was not
made obvious that it could be reused in post-biuld, post-image and
in-fakeroot scripts.

The BR2_EXTERNAL_<NAME>_DESC variable was not documented at all.

Update the manual to fix this.

Note: a2x chokes on this:

    .Note:
    Both +BR2_EXTERNAL_$(NAME)_PATH+ and +BR2_EXTERNAL_$(NAME)_DESC+ are
      available [...]

and spits out a totally useless error message:

    a2x: ERROR: "xsltproc" --stringparam toc.section.depth 1 --stringparam
    callout.graphics 0 --stringparam navig.graphics 0 --stringparam
    admon.textlabel 1 --stringparam admon.graphic 0 --stringparam
    chunk.section.depth 0 --output "/home/ymorin/dev/buildroot/O/docs/manual/manual.html"
    "/etc/asciidoc/docbook-xsl/xhtml.xsl"
    "/home/ymorin/dev/buildroot/O/docs/manual/manual.xml" returned
    non-zero exit status 6

So, we had to resort to using different quoting styles for each
variables. They are not semantically equivalent, but the rendering
is the same with the default CSS (which we are using). That's gonna
be good-enough for now...

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/br2-external: fix link to manual for converting old trees

To be noted: that link will only be valid once we have a released
manual. In the meantime, it's accessible on the nightly manual:
http://nightly.buildroot.org/#br2-external-converting

Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/br2-external: export paths and descriptions

Now that we support multiple br2-external trees, BR2_EXTERNAL is no
longer exported in the environment.

This means that post-build scripts in a br2-external tree can no longer
find their own files (well, they could re-invent the path by stripping
their known-relative path, but that'd be ugly, especially since we can
very well provide it).

Export the path for each br2-external trees as environment variables.
Do so for the description as well, as a courtesy.

Also, re-order variable definitions to be more logical: first, purely
internal variables, then exported variables.

Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docker-engine: add iptables runtime dependency

The Docker engine calls iptables internally:

https://github.com/docker/libnetwork/blob/2c921b/iptables/iptables.go#L400

Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: re-enter make if $(CURDIR) or $(O) are not canonical paths

When $(CURDIR) and/or $(O) contain symlinks in their paths, they can be
resolved differently, depending on each package build-system (whether it
uses the given paths or get the absolute canonical ones).

Using absolute canonical paths will help achieving reproducible builds and
will make easier tracking down host machine paths leaking into the host,
target or staging trees.
So, this change ensures the build takes place with the CURDIR and O
variables are set to their absolute canonical paths.

In order to recall the toplevel makefile with absolute canonical paths
for $(CURDIR) and $(O), we need to:
1- Compute the absolute canonical paths for $(CURDIR) and $(O) that will
   be passed to the sub-make. This is achieved using the 'realpath' make
   primitive. However, some care must be taken when manipulating O:
   - the out-of-tree makefile wrapper happens a trailing "/.", we need
     to strip this part away to not break the comparison driving the
     sub-make call;
   - the user can leave a trailing '/' to $(O);
   - according to [1,2], realpath returns an empty string in case of
     non-existing entry. So, to avoid passing an empty O= variable to
     sub-make, it is necessary to define the output directory and create
     it prior to call realpath on it (because on the first invocation,
     $(O) usually does not yet exists), hence the trick doing the mkdir
     right before calling realpath.
2- Update EXTRAMAKEARGS with the absolute canonical $(O) and use it
   when call recalling the top-level makefile with umask and paths
   correctly set.
3- Lastly, update the condition for setting the CONFIG_DIR and
   NEED_WRAPPER variables.

Note:
* This change takes care of the makefile wrapper installed in $(O) to
  avoid unneeded make recursion.

[1] https://www.gnu.org/software/make/manual/html_node/File-Name-Functions.html
[2] http://man7.org/linux/man-pages/man3/realpath.3.html

Reported-by: Matthew Weber <matt@thewebers.ws>
Cc: Matthew Weber <matt@thewebers.ws>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: reorder top-level Makefile and document things

This change only moves things around and comments what is done in the
top-level Makefile file, in order to prepare the next changes.

Note that moving the definition of $(O) before or after re-entering make
does not change anything on the buildroot behavior.

This change also renames the variable UMASK to REQ_UMASK.

Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: split variables definition related to in/out-of-tree build from O itself

This change uncorrolates the CONFIG_DIR and NEED_WRAPPER definition from
the presence of the O variable in the command line.

Now, the condition used to set these variables is the value of O itself.

This change is a preparatory work since the O definition will need to
be moved around when we will make Buildroot run with absolute canonical
paths for both its root directory and the output location.
This will be addressed in a follow-up patch.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: needs the qt5tools lrelease utility

Fixes:
http://autobuild.buildroot.net/results/0a4/0a4ccf752ed1e81e2416d33a78984b47087f68bd/
http://autobuild.buildroot.net/results/196/196b96e28a2cd5983a58948df4a2c3eb3bccdfa4/
http://autobuild.buildroot.net/results/056/056b3299ce45552fe3e7cbf5aa68b223f8fa458e/

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: avoid host qtchooser

Some distros provide a 'qtchooser' utility to select Qt library
version. Make sure not to use that host provided utility.

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: use https for download and homepage link

Saves a redirect.

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/misc/Vagrantfile: bump to ubuntu 16.04

* Updating to ubuntu 16.04
* Fixing dependencies
* Fixing locale complaints
* Removing unused packages

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liburcu: needs MMU

The test_urcu_fork.c test calls fork(). Upstream provides no easy way to
disable tests build.

Fixes:
http://autobuild.buildroot.net/results/9eb/9eb182ab2d0b396eeff3d637a040da5a4d5bdcd7/
http://autobuild.buildroot.net/results/47a/47aabc219a2fd50105881b1e2715f7eeb1a6a588/
http://autobuild.buildroot.net/results/566/56631605f76b8623c9674f25c529ac67d0de12a8/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liburcu: bump to version 0.9.2

Drop aarch64 support patch; no longer needed.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-usb-loader: bump version

Main additions are:
- Support for i.MX6SX, i.MX6UL and i.MX7
- Support for secure booting on i.MX6/i.MX7
- Various bug fixes

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-uuc: switch to open source version

The tool will be maintained as an open source project.
The repository can be found at:
https://github.com/NXPmicro/imx-uuc

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/9b56bf13

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-kobs: switch to open source version

The tools "kobs-ng" will be maintained as a open source project.
The repository location is https://github.com/NXPmicro/imx-kobs

This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/c23736b3

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

beaglebone: defconfigs: u-boot needs dtc

Fixes:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/168763221

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5webkit: do not overwrite target python

This commit fixes an issue introduced in commit
ac16793eaaabfced0312420759e3a66cdaa1ea8e. This commit creates a link
$(@D)/bin/python pointing to the host Python 2, and adds $(@D)/bin/ to
the PATH. However, the QT5WEBKIT_INSTALL_TARGET_CMDS variable copies the
contents of $(@D)/bin/ to the target filesystem, in order to install
binaries produced by the qt5webkit build. By doing this, we overwrite
the 'python' symbolic link on the target.

In order to fix this, we simply create the 'python' symbolic link used
to trick qt5webkit to use python2 on the host in the $(@D)/host-bin/
sub-directory.

Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nginx: bump to version 1.10.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.12.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: bump to version 1.30.1.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

go: bump to 1.7.2

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bind: don't lookup zlib.h in host headers

configure.in looks in host headers for zlib.h, unless given a headers
directory as --with-zlib parameter.

Note: a bug in the zlib.h header lookup logic causes configure.in to add
-l$(STAGING_DIR)/usr/include/include, and -L$(STAGING_DIR)/usr/include/lib.
But this does not affect us.

Fixes:
http://autobuild.buildroot.net/results/e96/e96a36c4da3c3be4b79a27af75a70bb8955c31a9/
http://autobuild.buildroot.net/results/e0b/e0bd7df5c19c7c65ce0009b7c2b4d4104a5c3109/
http://autobuild.buildroot.net/results/e99/e993940067f7ae841132765f91bfee7248ab125f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: bump to 2.0.13

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/efl: bump to 1.18.2

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docker-engine: bump to v1.12.2

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docker-containerd: bump to v0.2.4

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

runc: bump version to v1.0.0-rc2

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trinity: not available on musl

After fixing following build failures with musl:

* error: unknown type name __uint32_t and __uint64_t
* error: unknown type name pid_t and uid_t
* error: fatal error: bits/sockaddr.h: No such file or directory

it fails with

  fds/files.c: In function 'file_tree_callback':
  fds/files.c:172:10: error: 'FTW_CONTINUE' undeclared (first use in this function)
     return FTW_CONTINUE;
            ^
  fds/files.c:172:10: note: each undeclared identifier is reported only once for each function it appears in
  fds/files.c:178:10: error: 'FTW_SKIP_SUBTREE' undeclared (first use in this function)
     return FTW_SKIP_SUBTREE;
            ^
  fds/files.c:185:10: error: 'FTW_STOP' undeclared (first use in this function)
     return FTW_STOP;
            ^
  fds/files.c: In function 'open_fds_from_path':
  fds/files.c:197:26: error: 'FTW_ACTIONRETVAL' undeclared (first use in this function)
    int flags = FTW_DEPTH | FTW_ACTIONRETVAL | FTW_MOUNT;

As per ftw man-page, flag FTW_ACTIONRETVAL is specific to glibc. It is
not available on musl. Since package uses it unconditionally, we mark
it not available on musl.

Fixes:
  http://autobuild.buildroot.net/results/cb4/cb4a665746652679487dee2c2e4bca881be3724b/

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lirc-tools: bump to version 0.9.4b

Drop upstream patches. Renumber the rest.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lirc-tools: fix build with kernel headers v4.8+

Backport upstream path that removes references to macros that are no longer
in the kernel lirc.h headers.

Fixes:
http://autobuild.buildroot.net/results/f01/f015d52faa214f7786dd3169628ce74b738a8b46/
http://autobuild.buildroot.net/results/55f/55f1ac19736499ef536561bd65c011d2649f43da/
http://autobuild.buildroot.net/results/c68/c689786b6b0867cea2e45df1c5556cccdd377b33/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ci20_defconfig: update kernel version to ToT

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.8.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 7, 8}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

beaglebone: defconfigs: select ext4 as rootfs

Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM

[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: fix libgtk2 dependency typo

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: improve message if directfb is disabled

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

motion: fix sdl-config detection

Overwrite ac_cv_path_CONFIG_SDL in case sdl development is
installed on the host.

Fixes [1]:

ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL'

[1] http://autobuild.buildroot.net/results/459/4592eb83efa393f77f5ee014f93a271f2313bee6

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: bump to version 2.1.0

Fixes:
http://autobuild.buildroot.net/results/d88/d88889ba30444e73cfb12ae1357db25ff6a3a4fb/

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

filemq: disable documentation generation

The parameter to disable asciidoc documentation generation changed from
'fmq_have_asciidoc' to 'filemq_have_asciidoc'.

Fixes [1], [2], [3]:

  File "/usr/bin/asciidoc", line 101
    except KeyError, k: raise AttributeError, k
                   ^
  SyntaxError: invalid syntax

[1] http://autobuild.buildroot.net/results/5f0/5f0558235756419eff15b8e909b5d630712f5141
[2] http://autobuild.buildroot.net/results/a23/a23d92b09dadc12b3753c951900e28fc19bd14cd
[3] http://autobuild.buildroot.net/results/a45/a450ff5c6008ccf290a028e6eab7ff26369243e7

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add entry for libite

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libite: new package

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas:
- rewrap Config.in help text
- improve license description]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fwup: add dependency on host-pkgconf

The fwup configure.ac uses PKG_CHECK_MODULES(), and we're
autoreconfiguring this package, so we should depend on host-pkgconf.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: allow disabling the basic set of tools

When even a single extra util-linux utility is enabled, the default
build and install will install many more programs, including many that
overlap with those offered by busybox.

Fix by reworking the install-utilies menu to take advantage of the new
--disable-all-programs config option. This option make it possible to
disable the basic set of apps, and then enable only the desired apps.

Original patch by Danomi Manchego, visible at
http://patchwork.ozlabs.org/patch/494866/

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas/Arnout: remove the choice between all/custom/no, and simply have
a list of options with the basic set of tools, and then one option for
each tool. This gives the same flexibility, but avoids the choice, which
is never nice to have.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: improve license description

Use the recommended format for describing the license of different
components.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: expand selection of libraries and utilities

- Add option to control installation of libfdisk
- Add libfdisk license to the comment in util-linux.mk
- List all utilities provided by the basic set and document that
linux32, linux64, uname26, i386 and x86_64 are symlinks to setarch
- Add options to install cal, ipcrm, ipcs, logger, lslogin and pg

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add missing dependency of the new lslogins option on
libsmartcols, and therefore !MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: clean up libraries and tools selections

Fix several problems in the package recipe:

- Make 'bool "lib<foo>"' the first item in each block
- Move the depends before the selects
- Add missing dependencies on BR2_USE_MMU, for fork()
- Improve help for cramfs utilities and login utilities

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- remove capitalization of prompts, for consistency
- add missing dependencies on libsmartcols, and therefore !MMU]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/transmission: Use libsystemd instead of libsystemd-daemon

Fixes
http://autobuild.buildroot.net/results/78a/78af581f24758f7c2b19305a801e4c6c943730fb/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lighttpd: bump version to 1.4.42

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gzip: force shell shebang to /bin/sh

gzip's configure uses $SHELL to find a POSIX-compliant shell to put in
the shebang of its shell scripts (zcat, gzexe, ...). However, we set
$SHELL to /bin/bash in the Makefile, which may not be present on the
target. We do make sure that /bin/sh always points to a valid shell on
the target so we can use that.

The configure discovery is completely broken for cross-compilation. The
same $SHELL is used during the build (it is used by make to run the
commands in rules) and on the target. Also, the checks for a valid
shell use the host shell, not the target shell.

We could try to patch gzip to fix that, but the checks can anyway not
be run for the target shell, so we'll have to override it with a cache
value anyway. So we can just as well do exactly that, without patching.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: remove unused Linaro symlink hook

This hook was needed by 1014.09 Linaro toolchains.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: bump Linaro AArch64 to 2016.05 for i686 hosts

Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig and with
HOSTARCH set to x86 in the Buildroot main Makefile.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: bump Linaro ARMeb to 2016.05 for i686 hosts

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: bump Linaro ARM to 2016.05 for i686 hosts

This Linaro release provide a new toolchain archive for i686 hosts, so update our
old 2014.09.

Tested with Qemu qemu-2.4.1-11.fc23 and with HOSTARCH set to x86 in the Buildroot
main Makefile.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libiscsi: bump version to 1.18.0

Also...

- Switch to GitHub.
- Remove LD=CC logic in libscsi.mk. This is now handled by the configure
script.
- Add patch to fix unsafe include paths issues. This patch has been sent
upstream as a pull request.
- Use a hook to create the m4 directory so autoreconf doesn't fail.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: document the br2-external desc: field

Docuement the new, optional desc: field for an external.desc file.

That part of the manual was starting to be a bit of a mess, so
reorganise it. Provide a complete br2-external tree example.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: support description for br2-external trees

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: allow a br2-external tree to override a defconfig

Currently, it is not possible for a br2-external tree to override a
defconfig bundled in Buildroot, nor is it possible to override one from
a previous br2-external tree in the stack.

However, it is interesting that a latter br2-external tree be able to
override a defconfig:

  - the ones bundled in Buildroot are minimalist, and almost always
    build a toolchain, so a br2-external tree may want to provide a
    "better" defconfig (better, in the sense "suited for the project");

  - similarly for a defconfig from a previous br2-external tree.

But we can't do that, as the rules for the defconfigs are generated in
the order the br2-external trees are specified, all after the bundled
defconfigs. Those rule are patten-matching rules, which means that the
first one to match is used, and the following ones are ignored.

Add a new utility macro, 'reverse', inspired from GMSL, that does what
it says: reverse a list of words.

Use that macro to reverse the list of br2-external trees, so that the
latters win over the formers, and even over bundled ones.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: document multi br2-external

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: add support for multiple br2-external trees

Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.

A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.

Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.

Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.

What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:

  - the list of all br2-external names, BR2_EXTERNAL_NAMES,

  - the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
    point each to the actual location of the corresponding tree,

  - the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,

  - the space-separated list of absolute paths to the external trees,
    BR2_EXTERNAL_DIRS.

Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.

This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".

Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.

If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: add appendix to convert old br2-external trees

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
[Peter: slightly reword]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: document the br2-external NAME

Update the manual with the new external.desc mandatory file.

Take the opportunity to add a section listing all mandatory files,
Config.in, external.mk and the new external.desc, instead of just
hinting about them in the external package recipes section.

Change the examples to use the NAME-suffixed variable instead of the
raw BR2_EXTERNAL variable.

Change all references to BR2_EXTERNAL elsewhere in the manual to now
use the 'br2-external tree' terminology.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: introduce per br2-external NAME

This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.

This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.

Also, display the NAME and its path as a comment in the menuconfig.

This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.

The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.

Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).

Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/br2-external: validate even more

A br2-external tree must provide external.mk and Config.in.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: offload handling of BR2_EXTERNAL into the script

Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).

There is now no reason to treat those two cases differently:

  - the kconfig snippet is always generated appropriately (i.e. it would
    include the br2-external tree if set, or include nothing otherwise);

  - we no longer have a dummy br-external tree either.

Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.

However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.

To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.

However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.

Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.

Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.

Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.

Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.

Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: get rid of our dummy br2-external tree

Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.

As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.

Ditch both of those files, and:

  - only generate actual content in the Kconfig snippet when we actually
    do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
    empty);

  - add a variable that contains the path to the external.mk provided by
    the user, or empty if none, and include the path set in that variable
    (make can 'include' nothing without any problem! ;-) )

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: do not hard-code inclusion of br2-external in Kconfig

Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.

This will ultimately allow us to use more than one br2-external tree.

Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.

We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/go-bootstrap: bump version to 1.4.3

This bump includes
https://go.googlesource.com/go/+/a527bdbda39c48fa772d8d54eb6b849f240442c1

which fixes a gcc6-related compile error

cmd/6c
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c: In function 'gmove':
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:995:28: error: left shift of negative value [-Werror=shift-negative-value]
     f->vconst |= (vlong)~0 << 32;
                            ^~
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:1045:28: error: left shift of negative value [-Werror=shift-negative-value]
     f->vconst |= (vlong)~0 << 32;
                            ^~
cc1: all warnings being treated as errors

not yet caught by autobuilders using this defconfig:

http://autobuild.buildroot.net/results/394/394e22be0ef986463e97b3040dad8f978262732c/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linux-pam: bump to version 1.3.0

removed 0003-Conditionally-compile-per-innetgr-availability.patch,
applied upstream:
https://git.fedorahosted.org/cgit/linux-pam.git/commit/?id=835d64947996b7cc96fe187f9b3103db36dddf77

This bump includes
https://git.fedorahosted.org/cgit/linux-pam.git/commit/?id=01e0038fa55581c4afc9d63b6180d2ea77ba2940
which fixes
http://autobuild.buildroot.net/results/394/394e22be0ef986463e97b3040dad8f978262732c/

Removed comment in Config.in about broken --enable-static-modules
configure option because it was removed upstream:

https://git.fedorahosted.org/cgit/linux-pam.git/commit/?id=a684595c0bbd88df71285f43fb27630e3829121e

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: remove BR2_GCC_SUPPORTS_GRAPHITE

The blind option BR2_GCC_SUPPORTS_GRAPHITE was used to distinguish gcc
versions that support the graphite loop optimizer. But since a while
already, all the versions we support do support graphite. So this symbol
isn't needed anymore.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: gcc arc supports graphite

The ARC version of gcc does support graphite. It was probably just
forgotten when the BR2_GCC_VERSION_ARC symbol was introduced.

While we're at it, also remove a redundant newline.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: ARC Maintainers <arc-buildroot@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: remove BR2_GCC_NEEDS_MPC

The blind option BR2_GCC_NEEDS_MPC was used to distinguish gcc versions
that rely on the mpc library and the ones that don't. But since a while
already, all the versions we support do need the mpc library. So this
symbol isn't needed anymore.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dependencies: check for Math BigInt/BigRat Perl module

As for MakeMaker Perl module, add a check for Math BigInt/BigRat Perl
Core module, which are needed by mpv.

Fixes:
Waf: Entering directory `output/build/mpv-0.17.0/build'
[  1/198] Compiling version.sh
[ 12/198] Processing ebml_types.h: demux/ebml.c demux/demux_mkv.c -> build/ebml_types.h
[ 13/198] Compiling demux/ebml.c
Can't locate Math/BigRat.pm in @INC (you may need to install the Math::BigRat module)

Waf: Entering directory `output/build/mpv-0.17.0/build'
[  1/198] Compiling version.sh
[  2/198] Compiling TOOLS/osxbundle/mpv.app/Contents/Resources/icon.icns
[  3/198] Compiling video/out/x11_icon.bin
[  4/198] Compiling etc/input.conf
[  5/198] Compiling sub/osd_font.otf
[  6/198] Compiling video/out/opengl/nnedi3_weights.bin
[  7/198] Compiling player/lua/defaults.lua
[  8/198] Compiling player/lua/assdraw.lua
[  9/198] Compiling player/lua/options.lua
[ 10/198] Compiling player/lua/osc.lua
[ 11/198] Compiling player/lua/ytdl_hook.lua
[ 12/198] Processing ebml_types.h: demux/ebml.c demux/demux_mkv.c -> build/ebml_types.h
[ 13/198] Compiling demux/ebml.c
[ 14/198] Compiling DOCS/man/mpv.rst
Can't locate Math/BigInt.pm in @INC (you may need to install the Math::BigInt module)

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: François Perrad <francois.perrad@gadz.org>
[Thomas et al.: make those perl modules only required when mpv is enabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dependencies: check for MakeMaker Perl module

ExtUtils::MakeMaker is one of the Perl Core modules usually packaged in
Perl package for a Debian/Ubuntu based system.
For a Fedora based system, each Perl Core modules have their own RPM
package. So install only Perl package is not enough.

Fixes:
>>> host-libxml-parser-perl 2.41 Configuring
[...]
perl `which perl` Makefile.PL
Can't locate ExtUtils/MakeMaker.pm in @INC (you may need to install the ExtUtils::MakeMaker module)

Add a new Perl module check in dependency.sh.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: François Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt: Avoid X11 header collision with OpenGL/EGL

Including X11 headers via EGL/egl.h leads to a collision of defines
between Qt and X11. To fix this qt5 added
DEFINES += MESA_EGL_NO_X11_HEADERS
in various files:

https://github.com/qtproject/qtbase/blob/dev/src/platformsupport/eglconvenience/eglconvenience.pri#L19
https://github.com/qtproject/qtbase/blob/dev/src/plugins/platforms/minimalegl/minimalegl.pro#L10
https://github.com/qtproject/qtbase/blob/dev/src/plugins/platforms/eglfs/deviceintegration/eglfs_x11/eglfs_x11.pro#L6
[...]

This patch fixes a similar compile error in qt4:
http://autobuild.buildroot.net/results/9b0/9b0ed92984eead89d148eaa71aff6e2f1e117837/
http://autobuild.buildroot.org/results/4fd/4fd57553336d36439fab32a7221fc8639758e887/
http://autobuild.buildroot.org/results/5cb/5cb8072f8220f7203fa79936eedcc43eab53ec66/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Remove BR2_DEPRECATED

The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.

Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.

The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.

It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>