gdb/
Code cleanup.
* bfd-target.c (target_bfd_xclose): Remove parameter quitting.
* bsd-kvm.c (bsd_kvm_close): Likewise.
* bsd-uthread.c (bsd_uthread_close): Likewise.
* corelow.c (core_close): Likewise.
(core_close_cleanup): Remove parameter quitting from a caller.
* event-top.c (async_disconnect): Likewise.
* exec.c (exec_close_1): Remove parameter quitting.
* go32-nat.c (go32_close): Likewise.
* linux-nat.c (linux_nat_close): Remove parameter quitting.  Remove
parameter quitting from a caller.
* mips-linux-nat.c (super_close): Remove parameter quitting from the
variable.
(mips_linux_close): Remove parameter quitting.  Remove parameter
quitting from a caller.
* monitor.c (monitor_close): Remove parameter quitting.
* monitor.h (monitor_close): Likewise.
* record-btrace.c (record_btrace_close): Likewise.
* record-full.c (record_full_close): Likewise.
* remote-m32r-sdi.c (m32r_close): Remove parameter quitting and remove
it also from fprintf_unfiltered.
* remote-mips.c (mips_close): Remove parameter quitting.
(mips_detach): Remove parameter quitting from a caller.
* remote-sim.c (gdbsim_close): Remove parameter quitting.
(gdbsim_close): Remove duplicate function comment.  Remove parameter
quitting and remove it also from printf_filtered.
* remote.c (remote_close): Remove parameter quitting.
* solib-svr4.c (enable_break): Remove parameter quitting from a caller.
* target.c (update_current_target): Remove parameter int from to_close
de_fault.
(push_target, unpush_target, pop_target): Remove parameter quitting from
a caller.
(pop_all_targets_above, pop_all_targets): Remove parameter quitting.
Remove parameter quitting from a caller.
(target_preopen): Remove parameter quitting from a caller.
(target_close): Remove parameter quitting.  Remove parameter quitting
from a caller two times.  Remove parameter quitting also from
fprintf_unfiltered.
* target.h (struct target_ops): Remove parameter quitting and as int
from fields to_xclose and to_close.
(extern struct target_ops current_target):
(target_close, pop_all_targets): Remove parameter quitting.  Update the
comment.
(pop_all_targets_above): Remove parameter quitting.
* top.c (quit_target): Remove parameter quitting from a caller.
* tracepoint.c (tfile_close): Remove parameter quitting.
* windows-nat.c (windows_close): Remove parameter quitting.

Enable --gc-sections test cases for aarch64*-*-*

ld/testsuite/ChangeLog:

2013-03-20  Will Newton  <will.newton@linaro.org>

        * ld-elfvers/vers.exp (objdump_symstuff): Sort objdump output
based on the symbol name rather than address.
* ld-elfvers/vers1.sym: Reorder contents to match changes to vers.exp.
* ld-elfvers/vers15.sym: Likewise.
* ld-elfvers/vers18.sym: Likewise.
* ld-elfvers/vers21.sym: Likewise.
* ld-elfvers/vers9.sym: Likewise.

tfile.exp: Test printing a non-const global that is not covered by the trace frame; test disassembling.

Make sure we don't fallback to printing the initial value of a
non-const variable in the executable.

Also make sure we can do 'disassemble', as another test that GDB is
able to read read-only parts from the executable (the existing test of
printing constglob also covers that case).

gdb/testsuite/
2013-03-20  Pedro Alves  <palves@redhat.com>
    Yao Qi  <yao@codesourcery.com>

* gdb.trace/tfile.c: Add comments.
(nonconstglob): New global.
* gdb.trace/tfile.exp: Add comments.  Test printing a non-const
global that is not covered by the trace frame.  Test
disassembling.

* windows-nat.c (handle_output_debug_string): Replace call
to string_to_core_addr with call to strtoull.

bfd/
* elflink.c (_bfd_elf_make_dynamic_reloc_section): Override
sh_type according to is_rela.
ld/testsuite/
* ld-elf/rel.c, ld-elf/relmain.c, ld-elf/relmain.out: New test.
* ld-elf/shared.exp: Build and run it.

gdb/
* ctf.c (ctf_save_metadata_header): Define macro HOST_ENDIANNESS
and write it to CTF metadata.

* ld-elfvers/vers.exp: Add -Wl,--no-as-needed to all tests
linking against shared libraries.
* ld-elfweak/elfweak.exp: Likewise.  Enable for x86_64-linux.
Build main1.o using $picflag.

* symtab.h (Symbol::clear_version): New function.
* symtab.cc (Symbol_table::set_dynsym_indexes): Don't set object
is_needed by weak references.  Clear version for symbols defined
in as-needed objects that are not needed.

*** empty log message ***

daily update

* windows-nat.c (handle_output_debug_string): Change type of n to
SIZE_T to avoid crash on 64 bit systems.

*** empty log message ***

daily update

PR ld/12549
bfd/
* elflink.c (elf_link_add_object_symbols): Exclude weak refs when
considering whether an --as-needed library is needed.
ld/
* ld.texinfo (--as-needed): Update.
ld/testsuite/
* ld-elf/pr14862.out: Expect no output.

*** empty log message ***

daily update

merge from gcc

gdb/testsuite/
* gdb.base/valgrind-infcall.exp
(continue #$continue_count) <remote connection closed>
(continue #$continue_count) <valgrind vgdb has terminated>: Add kill of
$valgrind_pid.

Avoid MinGW warnings about redefinition of snprintf.

 gdb/python/python-internal.h (HAVE_SNPRINTF)
 [_WIN32 && HAVE_DECL_SNPRINTF]: Define, to avoid compiler warnings
 about redefinition of snprintf by pyerrors.h.

Fix compilation warning by MinGW GCC.

 setenv.c [!HAVE_ENVIRON_DECL]: Avoid declaring environ if it is
 a macro, as this causes compiler warnings with MinGW.

*** empty log message ***

daily update

*** empty log message ***

daily update

gas/testsuite/ChangeLog:

2013-03-15  Will Newton  <will.newton@linaro.org>

* gas/arm/any-idiv.d: Expand *-*eabi test to cover *-*eabi*.
* gas/arm/arch4t-eabi.d: Likewise.
* gas/arm/arch4t.d: Likewise.
* gas/arm/attr-any-armv4t.d: Likewise.
* gas/arm/attr-any-thumbv6.d: Likewise.
* gas/arm/attr-cpu-directive.d: Likewise.
* gas/arm/attr-default.d: Likewise.
* gas/arm/attr-march-all.d: Likewise.
* gas/arm/attr-march-armv1.d: Likewise.
* gas/arm/attr-march-armv2.d: Likewise.
* gas/arm/attr-march-armv2a.d: Likewise.
* gas/arm/attr-march-armv2s.d: Likewise.
* gas/arm/attr-march-armv3.d: Likewise.
* gas/arm/attr-march-armv3m.d: Likewise.
* gas/arm/attr-march-armv4.d: Likewise.
* gas/arm/attr-march-armv4t.d: Likewise.
* gas/arm/attr-march-armv4txm.d: Likewise.
* gas/arm/attr-march-armv4xm.d: Likewise.
* gas/arm/attr-march-armv5.d: Likewise.
* gas/arm/attr-march-armv5t.d: Likewise.
* gas/arm/attr-march-armv5te.d: Likewise.
* gas/arm/attr-march-armv5tej.d: Likewise.
* gas/arm/attr-march-armv5texp.d: Likewise.
* gas/arm/attr-march-armv5txm.d: Likewise.
* gas/arm/attr-march-armv6-m+os.d: Likewise.
* gas/arm/attr-march-armv6-m.d: Likewise.
* gas/arm/attr-march-armv6.d: Likewise.
* gas/arm/attr-march-armv6j.d: Likewise.
* gas/arm/attr-march-armv6k+sec.d: Likewise.
* gas/arm/attr-march-armv6k.d: Likewise.
* gas/arm/attr-march-armv6kt2.d: Likewise.
* gas/arm/attr-march-armv6s-m.d: Likewise.
* gas/arm/attr-march-armv6t2.d: Likewise.
* gas/arm/attr-march-armv6z.d: Likewise.
* gas/arm/attr-march-armv6zk.d: Likewise.
* gas/arm/attr-march-armv6zkt2.d: Likewise.
* gas/arm/attr-march-armv6zt2.d: Likewise.
* gas/arm/attr-march-armv7-a+idiv.d: Likewise.
* gas/arm/attr-march-armv7-a+mp.d: Likewise.
* gas/arm/attr-march-armv7-a+sec+virt.d: Likewise.
* gas/arm/attr-march-armv7-a+sec.d: Likewise.
* gas/arm/attr-march-armv7-a+virt.d: Likewise.
* gas/arm/attr-march-armv7-a.d: Likewise.
* gas/arm/attr-march-armv7-m.d: Likewise.
* gas/arm/attr-march-armv7-r+mp.d: Likewise.
* gas/arm/attr-march-armv7-r.d: Likewise.
* gas/arm/attr-march-armv7.d: Likewise.
* gas/arm/attr-march-armv7a.d: Likewise.
* gas/arm/attr-march-armv7em.d: Likewise.
* gas/arm/attr-march-armv7m.d: Likewise.
* gas/arm/attr-march-armv7r.d: Likewise.
* gas/arm/attr-march-armv8-a+crypto.d: Likewise.
* gas/arm/attr-march-armv8-a+fp.d: Likewise.
* gas/arm/attr-march-armv8-a+simd.d: Likewise.
* gas/arm/attr-march-armv8-a.d: Likewise.
* gas/arm/attr-march-iwmmxt.d: Likewise.
* gas/arm/attr-march-iwmmxt2.d: Likewise.
* gas/arm/attr-march-xscale.d: Likewise.
* gas/arm/attr-mcpu.d: Likewise.
* gas/arm/attr-mfpu-arm1020e.d: Likewise.
* gas/arm/attr-mfpu-arm1020t.d: Likewise.
* gas/arm/attr-mfpu-arm1136jf-s.d: Likewise.
* gas/arm/attr-mfpu-arm1136jfs.d: Likewise.
* gas/arm/attr-mfpu-arm7500fe.d: Likewise.
* gas/arm/attr-mfpu-fpa.d: Likewise.
* gas/arm/attr-mfpu-fpa10.d: Likewise.
* gas/arm/attr-mfpu-fpa11.d: Likewise.
* gas/arm/attr-mfpu-fpe.d: Likewise.
* gas/arm/attr-mfpu-fpe2.d: Likewise.
* gas/arm/attr-mfpu-fpe3.d: Likewise.
* gas/arm/attr-mfpu-maverick.d: Likewise.
* gas/arm/attr-mfpu-neon-fp16.d: Likewise.
* gas/arm/attr-mfpu-neon.d: Likewise.
* gas/arm/attr-mfpu-softfpa.d: Likewise.
* gas/arm/attr-mfpu-softvfp+vfp.d: Likewise.
* gas/arm/attr-mfpu-softvfp.d: Likewise.
* gas/arm/attr-mfpu-vfp.d: Likewise.
* gas/arm/attr-mfpu-vfp10-r0.d: Likewise.
* gas/arm/attr-mfpu-vfp10.d: Likewise.
* gas/arm/attr-mfpu-vfp3.d: Likewise.
* gas/arm/attr-mfpu-vfp9.d: Likewise.
* gas/arm/attr-mfpu-vfpv2.d: Likewise.
* gas/arm/attr-mfpu-vfpv3-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv3.d: Likewise.
* gas/arm/attr-mfpu-vfpv4-d16.d: Likewise.
* gas/arm/attr-mfpu-vfpv4.d: Likewise.
* gas/arm/attr-mfpu-vfpxd.d: Likewise.
* gas/arm/attr-names.d: Likewise.
* gas/arm/attr-order.d: Likewise.
* gas/arm/attr-override-cpu-directive.d: Likewise.
* gas/arm/attr-override-mcpu.d: Likewise.
* gas/arm/got_prel.d: Likewise.
* gas/arm/mapdir.d: Likewise.
* gas/arm/mapmisc.d: Likewise.
* gas/arm/mapsecs.d: Likewise.
* gas/arm/mapshort-eabi.d: Likewise.
* gas/arm/mapshort-elf.d: Likewise.
* gas/arm/mov-highregs-any.d: Likewise.
* gas/arm/mov-lowregs-any.d: Likewise.
* gas/arm/pr12198-1.d: Likewise.
* gas/arm/pr12198-2.d: Likewise.
* gas/arm/thumb-eabi.d: Likewise.
* gas/arm/thumb.d: Likewise.
* gas/arm/thumbrel.d: Likewise.

ld/testsuite/ChangeLog:

2013-03-15  Will Newton  <will.newton@linaro.org>

* ld-arm/arm-elf.exp: Expand *-*eabi test to cover *-*eabi*.
* ld-arm/gc-hidden-1.d: Likewise.
* ld-elfvsb/elfvsb.exp: Likewise.
* ld-shared/shared.exp: Likewise.

gdb:

2013-03-15  Steve Ellcey  <sellcey@mips.com>

* remote-sim.c (sim_command_completer): Make char arguments const.

include:

2013-03-15  Steve Ellcey  <sellcey@mips.com>

* gdb/remote-sim.h (sim_command_completer): Make char arguments const.

sim:

2013-03-15  Steve Ellcey  <sellcey@mips.com>

* arm/wrapper.c (sim_complete_command): Make char arguments const.
* avr/interp.c (sim_complete_command): Ditto.
* common/sim-options.c (sim_complete_command): Ditto.
* cr16/interp.c (sim_complete_command): Ditto.
* erc32/interf.c (sim_complete_command): Ditto.
* m32c/gdb-if.c (sim_complete_command): Ditto.
* microblaze/interp.c (sim_complete_command): Ditto.
* ppc/sim_calls.c (sim_complete_command): Ditto.
* rl78/gdb-if.c (sim_complete_command): Ditto.
* rx/gdb-if.c (sim_complete_command): Ditto.
* sh/interp.c (sim_complete_command): Ditto.

2013-03-15  Tony Theodore  <tonyt@logyst.com>

PR build/9098:
* Makefile.in (SHELL): Use @SHELL@.

PR c++/15116:
     * gdbtypes.c (types_equal): Handle TYPE_CODE_FUNC.
gdb/testsuite
     * gdb.cp/overload.cc (intintfunc): New.
     * gdb.cp/overload.exp: Add regression test.

* gas/arm/arch7.d: Skip for non-ELF ARM targets.
* gas/arm/arch7a-mp.d: Likewise.
* gas/arm/arch7em.d: Likewise.
* gas/arm/crc32-bad.d: Likewise.
* gas/arm/crc32.d: Likewise.

* addr2line.c (slurp_symtab): If canonicalization reveals that
there were no ordinary symbols, try loading the dynamic symbols
instead.

gas/ChangeLog:

2013-03-12  Will Newton  <will.newton@linaro.org>

* config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
in vstr in Thumb mode for pre-ARMv7 cores.

gas/testsuite/ChangeLog:

2013-03-12  Will Newton  <will.newton@linaro.org>

* gas/arm/vstr-thumb-bad.d: Assemble with -mcpu=arm1156t2f-s.

* powerpc.cc (Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Make
static and public.  Add report_err param.  Return false for data refs.
(Target_powerpc::rela_dyn_section): New overloaded function.
(Target_powerpc::plt_, iplt_): Elucidate.
(Output_data_plt_powerpc::entry_count): Handle current_data_size()==0.
(Output_data_plt_powerpc::do_write): Don't write .iplt.
(Output_data_plt_powerpc::plt_entry_count): Don't add .iplt entries.
(Target_powerpc::Scan::local, global): Adjust reloc_needs_plt_for_ifunc
calls.  Put ifunc dynamic relocs in irela_dyn_section.  Only
push_branch and make_plt_entry for ifunc syms when
reloc_needs_plt_for_ifunc.
(Target_powerpc::Relocate::relocate): Don't use plt entry value
for ifunc unless reloc_needs_plt_for_ifunc.

* gc.h (gc_process_relocs): Don't look through function descriptors.
* icf.cc (get_section_contents): Do so here instead.

gdb/testsuite/
* gdb.threads/non-ldr-exc-1.exp (do_test): Fix the indent of
using with_test_prefix.
* gdb.threads/non-ldr-exc-2.exp (do_test): Likewise.
* gdb.threads/non-ldr-exc-3.exp (do_test): Likewise.
* gdb.threads/non-ldr-exc-4.exp (do_test): Likewise.
* gdb.threads/watchpoint-fork.exp (test): Likewise.
* gdb.base/break-interp.exp (test_core): Likewise.
(test_attach_gdb): Likewise.
* gdb.base/catch-load.exp (one_catch_load_test): Likewise.
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Likewise.
* gdb.base/jit-so.exp (one_jit_test): Likewise.
* gdb.base/jit.exp (one_jit_test): Likewise.
* gdb.base/sepdebug.exp (test_different_dir): Likewise.
* gdb.dwarf2/dw2-dir-file-name.exp (test): Likewise.
* gdb.dwarf2/dw2-noloc.exp (file_symbols): Likewise.
* gdb.mi/mi-breakpoint-changed.exp (test_pending_resolved):
Likewise.
* gdb.mi/mi-cmd-param-changed.exp (test_command_param_changed):
Likewise.
* gdb.mi/mi-watch.exp test_watchpoint_all): Likewise.
* gdb.mi/pr11022.exp (test_memory_changed_observer): Likewise.
* gdb.trace/change-loc.exp (tracepoint_change_loc_1): Likewise.
(tracepoint_change_loc_2): Likewise.
* gdb.trace/disconnected-tracing.exp (disconnected_tracing):
Likewise.
(disconnected_tfind): Likewise.
* gdb.trace/mi-traceframe-changed.exp (test_tfind_tfile):
Likewise.
(test_tfind_remote): Likewise.
* gdb.trace/mi-tracepoint-changed.exp (test_reconnect):
Likewise.
(test_pending_resolved): Likewise.
* gdb.trace/mi-tsv-changed.exp (test_create_delete_modify_tsv):
Likewise.
(test_upload_tsv): Likewise.
* gdb.trace/pending.exp (pending_tracepoint_resolved):
Likewise.
(pending_tracepoint_works): Likewise.
* gdb.trace/report.exp (use_collected_data): Likewise.
* gdb.trace/status-stop.exp (test_tstart_tstop_tstart):
Likewise.
(test_tstart_tstart, test_buffer_full_tstart): Likewise.
* gdb.trace/strace.exp (strace_info_marker): Likewise.
(strace_trace_on_same_addr): Likewise.
(strace_trace_on_diff_addr): Likewise.
* gdb.trace/unavailable.exp (gdb_collect_args_test): Likewise.
(gdb_collect_locals_test): Likewise.
(gdb_unavailable_registers_test): Likewise.
(gdb_collect_globals_test): Likewise.

gdb/testsuite/
* gdb.base/condbreak.exp: Add semicolon back which was removed
by my previous commit.

*** empty log message ***

Fix erc32 simulator out-of-tree build failure.

sim/erc32/ChangeLog:

        * Makefile.in: Include build directory in search path to find
        config.h

daily update

* gdb_bfd.c (struct gdb_bfd_data) <crc_computed, crc>:
New fields.
(get_file_crc): Move from symfile.c.
(gdb_bfd_crc): New function.
* gdb_bfd.h (gdb_bfd_crc): Declare.
* objfiles.h (struct objfile) <crc32, crc32_p>: Remove.
* symfile.c (get_file_crc): Move to gdb_bfd.c.
(separate_debug_file_exists): Use gdb_bfd_crc.

gdb
* symfile.c (get_debug_link_info): Remove.
(find_separate_debug_file_by_debuglink): Use
bfd_get_debug_link_info.
bfd
* opncls.c (bfd_get_debug_link_info): Rename from
get_debug_link_info.  Export.  Update comment.
(find_separate_debug_file): Update.
* bfd-in2.h: Rebuild.

* symtab.c (error_in_psymtab_expansion): New function.
(lookup_symbol_aux_quick)
(basic_lookup_transparent_type_quick): Remove "last resort"
code.  Use error_in_psymtab_expansion.

* MAINTAINERS: Add myself as Meta maintainer.

gdb/
* dwarf2read.c (dw2_map_symtabs_matching_filename): Put continue after
any successful compare_filenames_for_search or FILENAME_CMP.
* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
* symtab.c (iterate_over_some_symtabs): Likewise.

* doc/c-arc.texi (ARC Directives): Revert last change and use
@itemize instead of @table.
* doc/c-arm.texi (ARM-Instruction-Set): Likewise.

gdb/
* source.c (print_source_lines_base): Make a local copy of
symtab_to_fullname.

gdb/
* source.c (print_source_lines_base): Suppress "file" for TUI.

gdb/testsuite/

* config/monitor.exp (gdb_target_cmd): Remove semicolon after
'return'.
(gdb_target_monitor, gdb_load): Likewise.
* config/sid.exp (gdb_load): Likewise.
* config/slite.exp (gdb_load): Likewise.
* config/vx.exp (gdb_start, spawn_vxgdb): Likewise.
* gdb.ada/arrayidx.exp, gdb.ada/null_array.exp: Likewise.
* gdb.arch/mips-octeon-bbit.exp (single_step): Likewise.
(single_step_until): Likewise.
* gdb.arch/powerpc-d128-regs.exp: Likewise.
* gdb.arch/system-gcore.exp: Likewise.
* gdb.base/bigcore.exp (extract_heap): Likewise.
* gdb.base/break-on-linker-gcd-function.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/call-rt-st.exp: Likewise.
* gdb.base/call-sc.exp, gdb.base/call-strs.exp: Likewise.
* gdb.base/callfuncs.exp, gdb.base/completion.exp: Likewise.
* gdb.base/condbreak.exp, gdb.base/constvars.exp: Likewise.
* gdb.base/corefile.exp: Likewise.
* gdb.base/dbx.exp (gdb_file_cmd): Likewise.
* gdb.base/exprs.exp, gdb.base/fileio.exp: Likewise.
* gdb.base/fixsection.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gcore-buffer-overflow.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp, gdb.base/gdb11530.exp: Likewise.
* gdb.base/gdb11531.exp, gdb.base/gnu-ifunc.exp: Likewise.
* gdb.base/info-os.exp, gdb.base/info-proc.exp: Likewise.
* gdb.base/interp.exp, gdb.base/langs.exp:: Likewise.
* gdb.base/list.exp: Likewise.
(set_listsize): Likewise.
* gdb.base/logical.exp, gdb.base/mips_pro.exp: Likewise.
* gdb.base/miscexprs.exp, gdb.base/nodebug.exp: Likewise.
* gdb.base/opaque.exp, gdb.base/pointers.exp: Likewise.
* gdb.base/psymtab.exp, gdb.base/ptype.exp: Likewise.
* gdb.base/relational.exp, gdb.base/scope.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
(test_set): Likewise.
* gdb.base/signals.exp, gdb.base/sizeof.exp: Likewise.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.base/store.exp, gdb.base/structs.exp: Likewise.
* gdb.base/structs2.exp, gdb.base/volatile.exp: Likewise.
* gdb.base/watchpoint.exp (initialize): Likewise.
(test_simple_watchpoint): Likewise.
(test_disabling_watchpoints): Likewise.
(test_watchpoint_triggered_in_syscall): Likewise.
* gdb.base/whatis.exp, gdb.cp/ambiguous.exp: Likewise.
* gdb.cp/casts.exp, gdb.cp/ctti.exp: Likewise.
* gdb.cp/namespace.exp, gdb.cp/nsdecl.exp: Likewise.
* gdb.cp/psmang.exp, gdb.dwarf2/dw2-ranges.exp: Likewise.
* gdb.hp/gdb.aCC/optimize.exp: Likewise.
* gdb.hp/gdb.aCC/watch-cmd.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.hp/gdb.base-hp/pxdb.exp: Likewise.
* gdb.hp/gdb.compat/xdb1.exp: Likewise.
* gdb.hp/gdb.compat/xdb2.exp: Likewise.
* gdb.hp/gdb.compat/xdb3.exp: Likewise.
* gdb.hp/gdb.defects/bs14602.exp: Likewise.
* gdb.hp/gdb.defects/solib-d.exp: Likewise.
* gdb.mi/gdb792.exp: Likewise.
* gdb.mi/mi-inheritance-syntax-error.exp: Likewise.
* gdb.mi/mi-logging.exp, gdb.mi/mi-var-cp.exp : Likewise.
* gdb.mi/mi-var-rtti.exp, gdb.python/py-type.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
(load_core): Likewise.
* gdb.threads/pthreads.exp (all_threads_running): Likewise.
(test_startup, check_control_c): Likewise.
* gdb.threads/sigstep-threads.exp: Likewise.
* gdb.threads/thread_check.exp: Likewise.
* gdb.trace/backtrace.exp, gdb.trace/change-loc.exp: Likewise.
* gdb.trace/circ.exp (run_trace_experiment): Likewise.
(set_a_tracepoint, trace_buffer_normal): Likewise.
(gdb_trace_circular_tests): Likewise.
* gdb.trace/collection.exp: Likewise.
* gdb.trace/disconnected-tracing.exp: Likewise.
* gdb.trace/infotrace.exp: Likewise.
* gdb.trace/mi-traceframe-changed.exp: Likewise.
* gdb.trace/mi-tracepoint-changed.exp: Likewise.
* gdb.trace/mi-tsv-changed.exp (test_create_delete_modify_tsv): Likewise.
* gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp: Likewise.
* gdb.trace/pending.exp, gdb.trace/report.exp: Likewise.
* gdb.trace/stap-trace.exp: Likewise.
* gdb.trace/status-stop.exp,gdb.trace/strace.exp: Likewise.
* gdb.trace/tfind.exp, gdb.trace/trace-break.exp: Likewise.
* gdb.trace/trace-buffer-size.exp: Likewise.
* gdb.trace/tspeed.exp, gdb.trace/tsv.exp: Likewise.
* gdb.trace/unavailable.exp: Likewise.
* gdb.trace/while-dyn.exp: Likewise.
* lib/fortran.exp (set_lang_fortran): Likewise.
* lib/gdb.exp (default_gdb_version, gdb_start_cmd): Likewise.
(gdb_breakpoint, gdb_reinitialize_dir): Likewise.
(default_gdb_start, get_compiler_info): Likewise.
(gdb_compile, gdb_compile_objc, gdb_reload, gdb_init): Likewise.
(get_debug_format, setup_xfail_format): Likewise.
(rerun_to_main, gdb_skip_float_test): Likewise.
(build_id_debug_filename_get, get_remotetimeout): Likewise.
* lib/java.exp (set_lang_java): Likewise.
* lib/mi-support.exp (default_mi_gdb_start): Likewise.
(mi_gdb_reinitialize_dir, mi_gdb_target_cmd): Likewise.
(mi_gdb_file_cmd, mi_gdb_test): Likewise.
(mi_run_cmd_full, mi_expect_interrupt): Likewise.
* lib/objc.exp (set_lang_objc): Likewise.
* lib/pascal.exp (set_lang_pascal): Likewise.
* lib/prompt.exp (default_prompt_gdb_start): Likewise.
* lib/trace-support.exp (gdb_trace_setactions, gdb_tfind_test): Likewise.
(gdb_readexpr, gdb_gettpnum, gdb_find_recursion_test_baseline): Likewise.

2013-03-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* tracepoint.c (cmd_qtv): Initialize `val' with zero, silencing
compiler warning.

From: Sergio Durigan Junior <sergiodj@redhat.com>
Subject: [PATCH] Fix for PR c++/15203 and PR c++/15210
Date: Sat, 09 Mar 2013 02:50:49 -0300 (5 days, 4 hours, 57 minutes ago)
Message-ID: <m3a9qdnmti.fsf@redhat.com>

Hi,

This bug was reported internally at our Bugzilla, along with a proposed
fix.  After talking to Keith about it, he investigated and came up with
another patch needed to really fix the issue on CVS HEAD.

The first part of the fix is the patch to cp-namespace.c.  It handles
the case when we are accessing a static variable inside a function
(inside a class) by the full linespec (is it right, Keith?).  E.g.:

    class foo
    {
    public:
        int bar()
        {
            static int var = 0;
        }
    };

And then, printing the value of `var':

    (gdb) print 'foo::bar()::var'

GDB would fall in an internal_error:

    gdb/cp-namespace.c:816: internal-error: cp_lookup_nested_symbol called on a non-aggregate type.

This is because `cp_lookup_nested_symbol' is not handling the case when
TYPE_CODE is either _FUNC or _METHOD.  This patch fixes it by returning
NULL in this case.

The second part of the fix is the patch to elfread.c.  It is needed
because the BSF_GNU_UNIQUE flag was added to some symbols in
<http://sourceware.org/ml/binutils/2009-06/msg00016.html>.  Because of
that, (still) the command:

    (gdb) print 'foo::bar()::var'

where `var' is a static variable returns:

    "No symbol "foo::bar()::var" in current context."

So with the second patch applied the command finally DTRT:

    (gdb) print 'foo::bar()::var'
    $1 = 0

This may not be the ideal solution, according to Keith it would be good
to implement productions on c-exp.y in order to recognize
CLASS::FUNCTION::VARIABLE, but it is a solution which works with what we
have today.

I regtested it in Fedora 17 x86_64 with -m64 and -m32, including
gdbserver, without regressions.

gdb/:
2013-03-14  Keith Seitz  <keiths@redhat.com>
    Alan Matsuoka  <alanm@redhat.com>

PR c++/15203
PR c++/15210
* cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_FUNC and
TYPE_CODE_METHOD.
* elfread.c (elf_symtab_read): Handle BSF_GNU_UNIQUE for certain
symbols.

gdb/testsuite/:
2013-03-14  Sergio Durigan Junior  <sergiodj@redhat.com>

PR c++/15203
PR c++/15210
* gdb.cp/m-static.cc (keepalive_int): New function.
(gnu_obj_1::method): New variable `sintvar', call `keepalive_int'.
* gdb.cp/m-static.exp: New test for `sintvar'.

PR gas/15273
* config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
NULL message, instead just check ARM_CPU_IS_ANY directly.

PR gas/15212
* doc/c-arc.texi (ARC Directives): Use @code instead of @bullte
for table format.
* doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
to the @item directives.
(ARM-Neon-Alignment): Move to correct place in the document.
* doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
formatting.
* doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
@smallexample.

gdb/testsuite/
* gdb.trace/tstatus.exp (run_trace_experiment): Save the output
of 'tstatus' into tstatus_output.
(top level): Save the trace data to tfile.  Read trace file in
tfile target.  Check the trace status.

gdb/
* tracepoint.c (tfile_write_status): Write 'stop_desc' of trace
status to tfile if trace is stopped by command 'tstop'.

gdb/
* tracepoint.c (tfile_write_status): Write trace notes and user
name into tfile if they are not NULL.

gdb/
2013-03-14  Hui Zhu  <hui@codesourcery.com>
    Yao Qi  <yao@codesourcery.com>

* Makefile.in (REMOTE_OBS): Add ctf.o.
(SFILES): Add ctf.c.
(HFILES_NO_SRCDIR): Add ctf.h.
* ctf.c, ctf.h: New files.
* tracepoint.c: Include 'ctf.h'.
(collect_pseudocommand): Remove static.
(trace_save_command): Parse option "-ctf".
Produce different trace file writers per option.
Adjust output message.
(trace_save_tfile, trace_save_ctf): New.
* tracepoint.h (trace_save_tfile, trace_save_ctf): Declare.
* mi/mi-main.c: Include 'ctf.h'.
(mi_cmd_trace_save): Handle option '-ctf'.  Call either
trace_save_tfile or trace_save_ctf.
* NEWS: Mention these changes.

gdb/doc/
2013-03-14  Hui Zhu  <hui@codesourcery.com>
    Yao Qi  <yao@codesourcery.com>

* gdb.texinfo (Trace Files): Add "tsave -ctf".

* emulparams/aarch64linux.sh (LIBPATH_SUFFIX): Set to 64 for
aarch64linux* emulations.

gdb/
* tracepoint.c (trace_file_writer_xfree): New.
(struct tfile_writer_data): New.
(tfile_dtor, tfile_can_target_save, tfile_start): New.
(tfile_write_header, tfile_write_regblock_type): New.
(tfile_write_status, tfile_write_uploaded_tsv): New.
(tfile_write_uploaded_tp, tfile_write_definition_end): New.
(tfile_write_raw_data, (tfile_end): New.
(tfile_write_ops): New global variable.
(TRACE_WRITE_R_BLOCK): New macro.
(TRACE_WRITE_M_BLOCK_HEADER): New macro.
(TRACE_WRITE_M_BLOCK_MEMORY): New macro.
(TRACE_WRITE_V_BLOCK): New macro.
(trace_save): Add extra one parameter WRITER.  Make it static.
Use WRITER to writer trace.
(tfile_trace_file_writer_new): New.
(trace_save_command): Caller update.
(trace_save_tfile): Write trace data in TFILE format.
* tracepoint.h (struct trace_frame_write_ops): New.
(struct trace_file_write_ops): New.
(struct trace_file_writer): New.
(trace_save): Remove its declaration.
(trace_save_tfile): Declare it.
* mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
instead of trace_save.

*** empty log message ***

daily update

Make hppa-hpux-nat.c:hppa_hpux_save_state_offset static.

Dave reports:

> There is one small (...) issue that needs fixing:
>
> gcc -g -O2   -I. -I../../src/gdb -I../../src/gdb/common -I../../src/gdb/config -DLOCALEDIR="\"/opt/gnu64/share/locale\"" -DHAVE_CONFIG_H -I../../src/gdb/../include/opcode -I../../src/gdb/../opcodes/.. -I../../src/gdb/../readline/.. -I../bfd -I../../src/gdb/../bfd -I../../src/gdb/../include -I../libdecnumber -I../../src/gdb/../libdecnumber  -I../../src/gdb/gnulib/import -Ibuild-gnulib/import   -DTUI=1  -Wall -Wdeclaration-after-statement -Wpointer-arith -Wformat-nonliteral -Wno-pointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement -Wempty-body -Werror -c -o hppa-hpux-nat.o -MT hppa-hpux-nat.o -MMD -MP -MF .deps/hppa-hpux-nat.Tpo ../../src/gdb/hppa-hpux-nat.c
> ../../src/gdb/hppa-hpux-nat.c:45:1: error: no previous prototype for 'hppa_hpux_save_state_offset' [-Werror=missing-prototypes]
> cc1: all warnings being treated as errors
>
> Believe the function should be static.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* hppa-hpux-nat.c (hppa_hpux_save_state_offset): Make static.

Fix completer.c FIXME, and invalid pointer to pointer conversion.

As mentioned in the previous patch, I grepped for "\*\*) &" and found
one hit in completer.c.

I was about to post a patch that simply made
current_demangling_style_string const, and cast away constness at the
xfree site.  However, looking deeper, it seem to be there's a lot of
dead code in the file.

First, all external callers of set_demangling_style are found in the
stabs reader, commented out for over 12 years:

  http://sourceware.org/ml/gdb-patches/2000-12/msg00214.html

I don't think it's likely we'll ever make the older mangling schemes
work for stabs.  If we do, we can rediscuss the approach then.

Then, set_demangling_command has special handling for unknown
demangling styles, but "set demangle-style" is an enum command, and
with those, the user can only specify a known enumeration value, by
design:

  (gdb) set demangle-style gangnam-style
  Undefined item: "gangnam-style".

This patch removes all that dead code, then makes
current_demangling_style_string point to an element of
demangling_style_names, as the FIXME suggests, and then makes
current_demangling_style_string, removing the need for the 'const char
**' cast.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* dbxread.c (read_ofile_symtab, process_one_symbol): Remove
commented out code.
* demangle.c (current_demangling_style_string): Make it const.
(set_demangling_command): Assert the demangling style is known.
Remove all handling of unknown styles.  Set
'current_demangling_style_string' to an element of the
demangling_style_names array.
(set_demangling_style): Delete.
(_initialize_demangler): Set current_demangling_style_string to the
element of the demangling_style_names array that corresponds to
the default demangling style.  Remove FIXME note.  Don't call
set_demangling_style.
* gdb-demangle.h (set_demangling_style): Remove declaration.

Extraneous NULL in linux_target_ops when HAVE_LINUX_BTRACE not defined

This fixes the followin error when HAVE_LINUX_BTRACE is not defined:

    linux-low.c:5943: error: excess elements in struct initializer
    linux-low.c:5943: error: (near initialization for 'linux_target_ops')

gdb/gdbserver/ChangeLog:

        * linux-low.c (linux_target_ops) [!HAVE_LINUX_BTRACE]:
        Remove extraneous NULL element.

Constify strings in tracepoint.c, lookup_cmd and the completers.

This is sort of a continuation of Keith's parse_exp_1 constification
patch.  It started out by undoing these bits:

  @@ -754,9 +754,12 @@ validate_actionline (char **line, struct
      tmp_p = p;
      for (loc = t->base.loc; loc; loc = loc->next)
        {
  -       p = tmp_p;
  -       exp = parse_exp_1 (&p, loc->address,
  +       const char *q;
  +
  +       q = tmp_p;
  +       exp = parse_exp_1 (&q, loc->address,
     block_for_pc (loc->address), 1);
  +       p = (char *) q;

and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).

That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.

I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.

I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.

The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const.  Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust.  No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg".  New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const.  Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char.  Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c".  Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char.  Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this.  Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg".  New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const.  Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const.  Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const.  Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust.  Don't frob the action string while splitting
it at commas.  Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.

* gdb.texinfo (Maintenance Commands): Add missing ')' for
"maint agent" reference to Dynamic printf.

More invalid pointer to pointer conversions.

As a follow up to:

  http://sourceware.org/ml/gdb-patches/2013-03/msg00449.html

In a nutshell, casts between 'char **' <-> 'unsigned char **' and
'char **' <-> 'const char **' are invalid.

I grepped for "\*\*) &" and found these.  There's another one in
demangle.c, but I've split fixing that one to a separate patch.

I think the ada_decode_symbol change is perhaps the one that could be
surprising.  The function's description has this comment, which makes
things much clearer:

   The GSYMBOL parameter is "mutable" in the C++ sense: logically
   const, but nevertheless modified to a semantically equivalent form
   when a decoded name is cached in it.  */

 const char *
 ada_decode_symbol (const struct general_symbol_info *gsymbol)

With that out of the way, I think the patch ends up being pretty
obvious.

Tested on x86_64 Fedora 17.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
rather than casting 'const char * const *' to 'const char **'.
* ada-lex.l (processInt): Make "trailer" local const.  Remove
'const char **' cast.
* arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
(_initialize_demangle): Remove cast.
* i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
* solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
casts.
* stap-probe.c (stap_parse_register_operand)
(stap_parse_single_operand): Likewise.

* tracepoint.c (tfile_get_trace_state_variable_value): Look for
the last matched 'V' blcok in trace frame.

gdb/gdbserver:

* tracepoint.c (traceframe_read_tsv): Look for the last matched
'V' block in trace frame.

gdb/testsuite:

* gdb.trace/tsv.exp (check_tsv): New.
(top level): Save a tfile on current trace session. Call
check_tsv on live target.  Load the tfile with target tfile
and call check_tsv again.

gdb/testsuite/
2013-03-13  Yao Qi  <yao@codesourcery.com>

* gdb.trace/tsv.exp: Remove code unrelated to testing TSV.
Replace some "gdb_test" with "gdb_test_no_output".

*** empty log message ***

daily update

* powerpc.cc (is_branch_reloc): Forward declare.
(Target_powerpc::do_can_check_for_function_pointers): New predicate.
(Target_powerpc::Scan::local_reloc_may_be_function_pointer): Return
false for 64-bit, true for 32-bit non-branch relocs.
(Target_powerpc::Scan::global_reloc_may_be_function_pointer): Likewise.
* testsuite/Makefile.am (icf_test): Use linker map file instead of
nm output.
(icf_safe_test): Generate linker map file as well as nm output.
(icf_safe_so_test): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_test.sh: Parse linker map file to determine
section folding.
* testsuite/icf_safe_test.sh: Likewise.  Expect folding for PowerPC.
* testsuite/icf_safe_so_test.sh: Likewise.
(X86_32_or_ARM_specific_safe_fold): Merge into..
(arch_specific_safe_fold): ..this.
(X86_64_specific_safe_fold): Delete unused function.

Update NEWS file following GDB 7.6 branch creation.

gdb/ChangeLog:

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

Record GDB 7.6 branch creation. Bump version number to 7.6.50.20130312-cvs.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

gas/testsuite/
* gas/nios2/nios2.exp: Use run_dump_tests.
* gas/nios2/mov.d: Delete file.
* gas/nios2/mov.s: Likewise.
* gas/nios2/rol.d: Likewise.
* gas/nios2/rol.s: Likewise.
* gas/nios2/add.d: Check instruction values.
* gas/nios2/align_fill.d: Likewise.
* gas/nios2/and.d: Likewise.
* gas/nios2/branch.d: Likewise.
* gas/nios2/bret.d: Likewise.
* gas/nios2/cache.d: Likewise.
* gas/nios2/call.d: Likewise.
* gas/nios2/call26.d: Likewise.
* gas/nios2/cmp.d: Likewise.
* gas/nios2/comments.d: Likewise.
* gas/nios2/complex.d: Likewise.
* gas/nios2/ctl.d: Likewise.
* gas/nios2/custom.d: Likewise.
* gas/nios2/etbt.d: Likewise.
* gas/nios2/flushda.d: Likewise.
* gas/nios2/jmp.d: Likewise.
* gas/nios2/ldb.d: Likewise.
* gas/nios2/ldh.d: Likewise.
* gas/nios2/ldw.d: Likewise.
* gas/nios2/lineseparator.d: Likewise.
* gas/nios2/movi.d: Likewise.
* gas/nios2/movia.d: Likewise.
* gas/nios2/mul.d: Likewise.
* gas/nios2/nor.d: Likewise.
* gas/nios2/or.d: Likewise.
* gas/nios2/registers.d: Likewise.
* gas/nios2/ret.d: Likewise.
* gas/nios2/rotate.d: Likewise.
* gas/nios2/stb.d: Likewise.
* gas/nios2/sth.d: Likewise.
* gas/nios2/stw.d: Likewise.
* gas/nios2/sub.d: Likewise.
* gas/nios2/sync.d: Likewise.
* gas/nios2/trap.d: Likewise.
* gas/nios2/tret.d: Likewise.
* gas/nios2/xor.d: Likewise.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h: Edit comment.

gas/
* config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
case.  Add default BAD_CASE to switch.

gas/testsuite/
* gas/nios2/break.d: Check instruction values.

* mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
* mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
Remove temporary copy of input string.
(mi_execute_command_wrapper): Make "cmd" const.
* mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
* mi/mi-parse.c (mi_parse_argv): Make "args" const.
Use const strings.
(mi_parse): Make "cmd" const.
Use const strings.
* mi/mi-parse.h (mi_parse): Make "cmd" const.

* ada-lang.c (ada_read_renaming_var_value): Pass const
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.

2013-03-12  Hui Zhu  <hui@codesourcery.com>

* dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.

Eliminate warning message.

* opcodes/mips-dis.c (print_insn_args): Modify def of reg.

2013-03-12  Yao Qi  <yao@codesourcery.com>
    Hui Zhu  <hui@codesourcery.com>

* dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
(dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
DW_OP_deref_size.

Allow 'thread' to be used as a variable name in expressions.

GDB treats the identifiers 'if', 'thread', and 'task' unconditionally
as expression delimiters in Ada mode, which is correct for 'if' and 'task',
but wrong for 'thread' in cases such as

      print thread

Borrowing from c-exp.y, we observe that 'thread' must be followed by
numerals, whereas identifiers never are and treat them as delimiters
only in that case.

In the process, the current also refactors and incidentally fixes the
code for rewinding the input to before the delimiting tokens.  For
example, the code

      watch expr if i > 2

fails because the input is only rewound to just before the 'i',
leaving the 'if' as part of the expression (and thus making the
rest look like trailing junk rather than a conditional clause).

gdb/ChangeLog:

    * ada-lex.l (rules): Only recognize 'thread' as a
    delimiter when followed by numerals, as for c-exp.y.
    Use new rewind_to_char function to rewind the input for
    expression-delimiting tokens.
    (rewind_to_char): New function.

gdb/testsuite/ChangeLog:

    * gdb.ada/expr_delims.exp: New file.
    * gdb.ada/expr_delims/foo.adb: New file.
    * gdb.ada/expr_delims/pck.ads: New file.
    * gdb.ada/expr_delims/pck.adb: New file.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h (OPX_WRPRS): New define.
(OP_MATCH_WRPRS): Likewise.

opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.

gas/
* config/tc-nios2.c (nios2_assemble_args_ds): New function.
(nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.

gas/testsuite/
* gas/nios2/nios2.exp: Run wrprs.
* gas/nios2/wrprs.d: New file.
* gas/nios2/wrprs.s: Likewise.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h (OP_RDPRS): New define.
(OP_MATCH_RDPRS): Likewise.

opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.

gas/testsuite/
* gas/nios2/nios2.exp: Run rdprs.
* gas/nios2/rdprs.d: New file.
* gas/nios2/rdprs.s: Likewise.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

opcodes/
* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.

gas/testsuite/
* gas/nios2/nios2.exp: Run registers.
* gas/nios2/registers.d: New file.
* gas/nios2/registers.s: Likewise.

* gc.h (gc_process_relocs): Look through function descriptors
to determine shndx, symvalue and addend used by ICF.  Tidy
variable duplication.

*** empty log message ***

daily update

* gdb.texinfo (General Query Packets): Don't use colon in index
entries visible to Info format.

* watchpoint.exp (test_no_hw_watchpoints): Add test using
both condition and thread.  Then delete the watchpoint.

gdb/
* configure: Regenerate.
* configure.ac (check dynamic export flag): Link python test with
$PYTHON_LIBS.

* linespec.c (find_linespec_symbols): Call find_function_symbols
first, and then call lookup_prefix_sym/find_method.

Avoid invalid pointer to pointer conversions.

Casts between 'char **' <-> 'unsigned char **' and 'char **' <-> const
char **' are actually invalid:

  http://gcc.gnu.org/ml/gcc-help/2013-03/msg00118.html

In a nutshell, char (and variants) can alias anything, but pointers to
chars get no special treatment (cf. C99/N1256, 6.5/7).

Turns out older gcc's actually warn/complain on these constructs,
though newer one's don't:

  http://sourceware.org/ml/gdb-patches/2013-03/msg00429.html
  http://sourceware.org/ml/gdb-patches/2013-03/msg00430.html

This patch fixes the cases I added last week.  It also fixes one other
preexisting case in charset.c, though it seems even older gccs don't
complain of char * <-> const char * aliasing.

Tested on x86_64 Fedora 17.

gdb/
2013-03-11  Pedro Alves  <palves@redhat.com>

* charset.c (convert_between_encodings): Don't cast between
different pointer to pointer types.  Instead, make the 'inp' local
be of the type iconv expects.
(wchar_iterate): Don't cast between different pointer to pointer
types.  Instead, use new pointer local of the type iconv expects.
* target.c (target_read_stralloc, target_fileio_read_stralloc):
Add new local of type char pointer, and use it to get a
char/string view of the byte buffer, instead of casting between
pointer to pointer types.

2013-03-11  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* remote.c (remote_set_trace_buffer_size): Move != operator
to the start of next line to fix an ARI warning.

Add support for AArch32 CRC instruction in ARMv8.

gas/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* config/tc-arm.c (crc_ext_armv8): New feature set.
(UNPRED_REG): New macro.
(do_crc32_1): New function.
(do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
do_crc32ch, do_crc32cw): Likewise.
(TUEc): New macro.
(insns): Add entries for crc32 mnemonics.
(arm_extensions): Add entry for crc.

include/opcode/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* arm.h (CRC_EXT_ARMV8): New constant.
(ARCH_CRC_ARMV8): New macro.

opcodes/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* arm-dis.c (arm_opcodes): Add entries for CRC instructions.
(thumb32_opcodes): Likewise.
(print_insn_thumb32): Handle 'S' control char.

gas/testsuite/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* gas/arm/crc32-bad.d: New file.
* gas/arm/crc32-bad.l: Likewise.
* gas/arm/crc32-bad.s: Likewise.
* gas/arm/crc32.d: Likewise.
* gas/arm/crc32.s: Likewise.

Add tests for the new record-btrace target.

testsuite/
* Makefile.in: Add btrace testsuite.
* configure: Regenerated.
* configure.ac: Add btrace testsuite.
* gdb.btrace/Makefile.in: New file.
* gdb.btrace/enable.c: New file.
* gdb.btrace/enable.exp: New file.
* gdb.btrace/function_call_history.c: New file.
* gdb.btrace/function_call_history.exp: New file.
* gdb.btrace/instruction_history.c: New file.
* gdb.btrace/instruction_history.exp: New file.
* gdb.btrace/instruction_history.S: New file.
* lib/gdb.exp: Add btrace skip proc.

Document changes to the record target resulting from the renaming into
record-full.

Document two new record sub-commands "record instruction-history" and
"record function-call-history" and two associated set/show commands
"set record instruction-history-size" and "set record
function-call-history-size".

Add this to NEWS.

gdb/
* NEWS: Add record changes.

doc/
* gdb.texinfo (Process Record and Replay): Document record
changes.

Add a disassembly flag to omit the pc prefix and use it in the "record
instruction-history" command of record-btrace.

The pc prefix would appear multiple times in the branch trace disassembly,
which is more confusing than helpful.

gdb/
* record-btrace.c (btrace_insn_history): Omit the pc prefix in
the instruction history disassembly.
* disasm.c (dump_insns): Omit the pc prefix, if requested.
* disasm.h (DISASSEMBLY_OMIT_PC): New.

Add a target for branch trace recording.

The target implements the new record sub-commands
"record instruction-history" and
"record function-call-history".

The target does not support reverse execution or navigation in the
recorded execution log.

gdb/
* Makefile.in (SFILES): Add record-btrace.c
(COMMON_OBS): Add record-btrace.o
* record-btrace.c: New.
* objfiles.c: Include btrace.h.
(free_objfile): call btrace_free_objfile.

Add command to print the function names from recorded instructions.

This command provides a quick high-level overview over the recorded execution
log at function granularity without having to reverse-step.

gdb/
* target.c (target_call_history, target_call_history_from,
target_call_history_range): New.
* target.h (target_ops) <to_call_history, to_call_history_from,
to_call_history_range>: New fields.
(target_call_history, target_call_history_from,
target_call_history_range): New declaration.
* record.c (get_call_history_modifiers, cmd_record_call_history,
record_call_history_size): New.
(_initialize_record): Add the "record function-call-history" command.
Add "set/show record function-call-history-size" commands.
* record.h (record_print_flag): New.

Add a command to provide a disassembly of the execution trace log.

gdb/
* target.h (target_ops) <to_insn_history, to_insn_history_from,
to_insn_history_range>: New fields.
(target_insn_history): New.
(target_insn_history_from): New.
(target_insn_history_range): New.
* target.c (target_insn_history): New.
(target_insn_history_from): New.
(target_insn_history_range): New.
* record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
(record_insn_history_size): New.
(get_insn_number): New.
(get_context_size): New.
(no_chunk): New.
(get_insn_history_modifiers): New.
(cmd_record_insn_history): New.
(_initialize_record): Add "set/show record instruction-history-size"
command. Add "record instruction-history" command.