support/config-fragments: use external riscv64 musl toolchain

Move to an external RISC-V 64 bit musl toolchain to ease the load
on the autobuilders.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments: add RISC-V 64-bit uclibc autobuild config

Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with uclibc.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-buildroot: enable uclibc for riscv64

We can enable uclibc for RISC-V 64 bit now that it has been
bumped from v1.0.32 to v1.0.34.

Uclibc has had basic support for RISC-V 64 bit since v1.0.31, but
shared library and TLS/NPTL support has only been available since
v1.0.33.

This update has been tested using qemu_riscv64_virt_defconfig and
the Buildroot host QEMU.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: needs kernel options

according to https://wiki.gentoo.org/wiki/Systemd#Kernel

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Peter: drop optional CGROUP_BPF / BPF_SYSCALL, unused POSIX_MQUEUE and
 DEVTMPFS which is already taken care of by linux.mk]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-engine: needs some kernel options

according to https://wiki.gentoo.org/wiki/Docker#Kernel /
docker-engine/contrib/check-config.sh.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Peter: synchronize with contrib/check-config.sh, only enforce DM options if
 device mapper driver is enabled]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lz4: don't install programs by default

Commit 2acb27e298c54935f890111fc5897a11350b913b ("package/lz4: make
program installation optional") make the installation of the lz4
programs optional. To preserve backward compatibility, this commit
added a "default y" to the BR2_PACKAGE_LZ4_PROGS.

While Buildroot definitely tries to preserve backward compatibility in
general, in this case, the backward compatibility would mean that
everbody would by default install those 220 KB of program, which are
most likely not needed for the majority of use cases. Installaing them
by default kind of breaks the Buildroot principle of minimalism.

In this specific case, it is believed that the principle of minimalism
wins over the principle of backward compatibility.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cegui: fix indentation

No functional changes, only whitespace changes.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cegui: fix selecting the default OpenGL renderer

According to the cegui requirements select explicitly the default
OpenGL renderer based on available dependencies.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lz4: make program installation optional

Often lz4 is used as a library, and not as a standalone program.
Excluding lz4 binary will save some space in this case. Indeed, the
lz4 program is always statically linked against its library, which
makes it duplicate the whole library size:

$ ls -l usr/lib/liblz4.so.1.9.2 usr/bin/lz4
-rwxr-xr-x 1 thomas thomas 226724 27 juil. 16:33 usr/bin/lz4
-rwxr-xr-x 1 thomas thomas 156996 27 juil. 16:33 usr/lib/liblz4.so.1.9.2

Since lz4 is now primarily a library, it's moved to the "Libraries"
section.

Of course, installation of programs defaults to "yes" to preserve
backward compatibility.

Signed-off-by: Ed Spiridonov <edo.rus@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-matplotlib: add QT5 support

python-matplotlib may be used in qt5 application. This patch add option to
enable qt5. Since this backend is automatically enabled when pyqt5 is detected,
list dependencies is simply an updated (no enable/disable options).

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-networkx: install for host-python3

This Python module only works for Python 3: the target variant has a
"depends on BR2_PACKAGE_PYTHON3".

However today in Buildroot, when no target python is selected, or when
BR2_PACKAGE_PYTHON=y, all host python modules are installed for
host-python, i.e Python 2. But this module won't install in Python 2,
so let's force its host variant to be installed with Python 3 on the
host. Of course, for that to work, its dependency must also be built
for host-python3, so we change it to the newly introduced
host-python3-decorator package.

Fixes:

  http://autobuild.buildroot.net/results/46a89bd6cd0d0b896b28010db287068309e7a43c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python3-decorator: new package

The host-python-networkx package needs to be built for the
host-python3, even when the target Python is not necessarily Python
3.x. Since it depends on host-python-decorator, we need a Python 3
variant of it, which this patch introduces.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rocksdb: bump to version 6.10.1

- Update indentation of hash file (two spaces)
- Remove first patch (already in version)
- Add link to upstream PR in second patch
- Add upstream patch to fix build on powerpc (patch does not apply
  cleanly on current version)
- Update hash of README.md, slack forum added with
  https://github.com/facebook/rocksdb/commit/cf342464caf8155ab60f7a48e39a8d6ae3138a7a

Fixes:
 - http://autobuild.buildroot.org/results/242db7139ce5dd6ece4a1eb50a1aa47c841a41b7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-rpi-ws281x: bump to version 4.2.4

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{glibc, localedef}: bump to version 2.31

For glibc 2.31.x:

  - Update LICENSES file hash due to url change:
    "Prefer https to http for gnu.org and fsf.org URLs"

  - riscv64 does not build with kernel headers < 5.0, but upstream
    has not yet comitted a single fix, neither in master nor in the
    maintenance branch:
       https://sourceware.org/ml/libc-alpha/2020-02/msg00018.html

For localedef 2.31.x:

  - Remove upstream patch for localedef:
    0003-localedef-Use-initializer-for-flexible-array-member-.patch

Note that this version bump required some patches applied on
several packages (already applied):
    [Busybox] 13f2d688a24f47446af236829bd6ca194d5aea5b
    [openssh] bad75bca315dbd2c69f8a9cb02fa9f27636e3d48
    [gcc] disable libsanitizer with gcc 7.5

See:
https://sourceware.org/legacy-ml/libc-announce/2020/msg00001.html

Tested by toolchain builder:
https://gitlab.com/kubu93/toolchains-builder/pipelines/129551000

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gcc: disable libsanitizer with gcc 7.5 and glibc 2.31 toolchain

libsanitizer in gcc 7.x fails to build with glibc 2.31. Fixing it would
require backporting an upstream commit:

    https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=4abc46b51af5751d657764d0c44b8a4aeed06302

However, the backport is not trivial, as there are a lot of conflicts.

Disable libsanitizer since the gcc 7.5 branch is now closed
(unmaintained) and it's not a trivial merge.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/c-periphery: bump to v2.2.2

c-periphery now supports building on older kernels before 4.8 as there
are now checks for the new kernel cdev gpio interface.

Also updated hash file to two space format.

Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wine: bump version to 5.12

Also update hash file formatting (2 spaces).

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/setools: add comment about Python 3.x dependency

Commit 09b94b1e8f94d1f49f7a2349b4c8cbfecefa73da forgot to add the
usual comment that python3 dependency is due to python-networkx.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nodejs: use system-icu for host-nodejs

The nodejs configure.py file orders zlib headers before the bundled ICU
headers. The zlib headers happen to be located in the system include
directory, next to some system ICU headers (not bundled). If these are
built before nodejs is, nodejs will get confused and try to use the
system ICU headers instead of the bundled ones.

Fix this by always using host-icu.

Set CXXFLAGS to -DU_DISABLE_RENAMING=1 when building with
system-icu since host-icu is built with --disable-renaming.

Fixes:
 - http://autobuild.buildroot.net/results/1ef947553ec762dba6a6202b1cfc84ceed75dbb2/

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
  - keep alphabetical order in _DEPENDENCIES
  - don't introduce HOST_NODEJS_CONF_OPTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

gitlab: generate the gitlab-ci configuration before each build

Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632

This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.

Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rust: drop reference to HOST_RUST_JEMALLOC_CONF

This variable is no longer used since
4e3be3ae9d4c9f1b0c035eee0c923a724f9a9316 ("package/rust: bump version
to 1.33.0")

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cargo-bin: remove and use cargo-bin from rust-bin package

Rust upstream distributes tarballs with separate rust and cargo
binaries, but also tarballs with everything together. The latter
contains a bit more than what we need, so the download is slightly
larger than separate cargo-bin and rust-bin. But it simplifies our life
if we do the same in rust-bin as in rust (i.e. get both rust and cargo).

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust: bump to 1.40

- remove of the llvm workaround patch as it is integrated in this
  newer version.
- bump cargo-bin to 0.41 (corresponds to rust 1.40) and update
  licenses hashes.
- bump rust-bin to 1.40.

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: cargo packages depend on host-rustc

As Cargo is either installed by host-rust or host-rust-bin, the
Cargo-based packages should depend on host-rustc.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: also select HOST_RUSTC in Config.in]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cargo: drop package

As no package depends on the standalone cargo package, it can be
dropped.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ripgrep: depends on host-rustc

As all providers of rustc also install cargo, there is no need to depend
on the standalone cargo package anymore. Instead add host-rustc to the
dependency list.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust: drop dependency on host-cargo-bin

As host-rust depends on host-rust-bin, which depends on host-cargo-bin,
remove unneeded dependency.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust-bin: host variant depends on host-cargo-bin

Ensure installation of pre-built cargo binary by adding it to the
dependency list of the host variant of the pre-built Rust compiler.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cargo-bin: install if rust-bin selected

If host-rust-bin, the pre-built Rust compiler, is selected as a rustc
provider, then also install the pre-built cargo binary to be coherent.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: don't install cargo config, alread moved]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust: build and install cargo

Cargo source code is not provided anymore as a separate tarball but is
now built along with the Rust compiler. So update rust host variant to
build Cargo.

For now, all this will be overwritten again by the host-cargo package,
but this package will be removed in later commits.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Tested-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: merge all install commands in HOST_RUST_INSTALL_CMDS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rustc: install cargo config as toolchain post-install hook

The cargo config file is much like the cmake and meson configuration
files, something that tells the cargo build system how the
cross-toolchain is configured.

It is currently installed by the cargo package, but this package is
about to be removed as cargo is now built as part of rust
itself. Therefore, install the cargo config file as a toolchain
post-install hook, just like we do for cmake and meson.

However, we don't have a pkg-cargo infrastructure (yet) so we can't
put it there. Therefore, put it in the rustc package - any cargo
package will need rustc.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnss: bump version to 3.55

Bump version to 3.55. Unfortunately local patch is still pending
upstream and not applied and I've just asked why:
https://bugzilla.mozilla.org/show_bug.cgi?id=1642174

This version requires NSPR 4.27.

Release Notes:
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libnspr: bump version to 4.27

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/docker-engine: needs more runtime dependencies

fix error:
failed to start daemon: Devices cgroup isn't mounted

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mbpfan: new package

Adding mbpfan, a fan control daemon for MacBook laptops.

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: add hash file, drop Debian init script, drop systemd symlinks, add
 DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vlc: fix missing headers when compiling with Qt 5.15

Fixes
http://autobuild.buildroot.net/results/832/832226c43549befda7e8c86a52354e7d6adc0a98/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/tpm2-tools: bump version to 4.1.2

Bugfix release with a single fix:

- Fix missing handle maps for ESY3 handle breaks. See #1994

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tpm2-abrmd: bump version to 2.3.2

Fixes various initialization / systemd issues. From the changelog:

- Provide meaningful exit codes on initialization failures.
- Prevent systemd from starting the daemon before udev changes ownership of
  the TPM device node.
- Prevent systemd from starting the daemon if there is no TPM device node.
- Prevent systemd from restarting the daemon if it fails.
- Add SELinux policy to allow daemon to resolve names.
- Add SELinux policy boolean (disabled by default) to allow daemon to
  connect to all unreserved ports.

Also adjust .hash file white space to match new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libwebsockets: add fsmount support

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: add libglib2 support

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: bump version to 4.0.20

Other changes:
  - Remove upstream patch.
  - Change license type to MIT.
  - Update license shasum due to the above change.
  - Upstrem agained optional support for libglib2 and fsmount, we
    disable those so far

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: forcibly disable new features]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: add support for extensions

libwebsockets currently depends on zlib, however, as of commit
13ba5bbc633ea962d46d9f2bfb2e87c9f7e83b62 (from 2013!) zlib is not actually a
requirement if extensions are not enabled.

By default, libwebsockets sets the "LWS_WITHOUT_EXTENSIONS" option to "ON,"
which removes the need for zlib as a dependency. Because of this default
setting, there are two options:

1) Remove the dependency on zlib, create a new option under Config.in to allow
a user to enable extensions, add zlib as a dependency, and set
LWS_WITHOUT_EXTENSIONS to "OFF" if that option is selected.

2) Keep the dependency and explicitly set LWS_WITHOUT_EXTENSIONS to "OFF."

Below are the size differences in bytes:
  - Without zlib and extensions: 44636
  - With zlib and without extensions: 44720
  - With zlib and with extensions: 44732

Considering the size difference between all 3 is an incredible 96 bytes, and
the difference between what we have now, and enabling extensions is an
insurmountable 12 bytes, it is safe to keep the dependency on zlib and always
enable extensions.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/powerpc-utils: bump to version 1.3.7

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/librtas: bump to version 2.0.2

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/snmppp: fix SNMPv3 with gcc <= 5

Fixes:
 - http://autobuild.buildroot.org/results/bfe3faefc007f2e746c9f0af9b7d0926bb72dc9e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/freeswitch: fix build error

Freeswitch has been tested agains tan older version of libcheck, 0.12.0
or earlier, while Buildroot has 0.15.1. With 0.13.0, the API of libcheck
has changed, and Freeswitch does not account for this.

Fixes
http://autobuild.buildroot.net/results/5db/5dbce5860f57c1457962aa295857689f49a60bc6/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: expand commit log with the root cause]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/chocolate-doom: bump to version 3.0.1

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freeswitch-mod-bcg729: bump version to 1.0.5

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libhdhomerun: bump version to 20200521

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libopenh264: bump version to 2.1.1

Release notes:
https://github.com/cisco/openh264/blob/openh264v2.1.1/RELEASES

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot-pigeonhole: bump version to 0.5.10

Release notes:
https://raw.githubusercontent.com/dovecot/pigeonhole/release-0.5.10/NEWS

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/barebox: bump version to 2020.07.0

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/check: bump version to 0.15.1

Release notes: https://github.com/libcheck/check/blob/0.15.1/NEWS

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/moarvm: bump to 2020.07

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xapian: bump to version 1.4.16

Updated indentation in hash file (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ncdu: bump to version 1.15.1

Updated indentation in hash file (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libolm: bump to version 3.1.5

Updated hash file indentation (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2020.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dee53013da87dfa4bcb3433bdef79ec43b5a5c24)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2020.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 667adccb927395ab99d17fc8877b21bf70614218)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libwebsockets: remove dependency on mmu

Six years ago, commit b6b5bb518d28850e024b90db1129b7f86e9d416c added the MMU
dependency for the libwebsockets package. However, according to the git
history of the CMakeLists.txt file, libwebsockets has supported the vfork
function for at least the last five years.

After testing with the qemu_arm_versatile_nommu_defconfig and the
br-arm-cortex-m4-full.config file, no errors occurred when building
libwebsockets without MMU support.

Remove the dependency; it is no longer necessary. Update the reverse
dependencies as needed.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/enchant: bump to version 2.2.8

- Update site to get latest version
- Update hash of COPYING.LIB (update in FSF address with
  https://github.com/AbiWord/enchant/commit/adcb08292d4650a1c258f9b02c53cf1e26b47185)
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qlibc: bump to version 2.4.5

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mail-dkim: bump to version 1.20200708

- new scheme for version
- LICENSE file added

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-net-dns: bump to version 1.25

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mojolicious: bump to version 8.57

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-lwp-protocol-https: bump to version 6.09

now, LICENSE has its own file

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-libwww-perl: bump to version 6.46

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-message: bump to version 6.25

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-entity-parser: bump to version 0.23

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-gd: bump to version 2.72

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-util: bump to version 4.201720

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-slurp: bump to version 9999.32

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/minizip: use pkg-config to find zstd

Fix build with zstd in version 2.10.0

Fixes:
 - http://autobuild.buildroot.org/results/0fe0ca0a7d39f863614f2aecd9eefc20cd64daf4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gitlab-ci: convert only/except to rules

only/except keywords will be deprecated by upcoming gitlab release,
upstream recommend to use rules keyword instead [1][2][3][4][5].

This patch convert .gitlab-ci.yml to use rules, no functional
changes intended.

After this patch, we should still have the following behaviour
while pushing commit, tag, branches:

     - to trigger only the check-* jobs:
       $ git push gitlab HEAD:<name>

     - to trigger all defconfigs and all check-* jobs:
       $ git push gitlab HEAD:<name>-defconfigs

     - to trigger all runtime tests and all check-* jobs:
       $ git push gitlab HEAD:<name>-runtime-tests

     - to trigger one defconfig job:
       $ git push gitlab HEAD:<name>-<defconfig name>

     - to trigger one runtime job:
       $ git push gitlab HEAD:<name>-<test case name>

[1] https://gitlab.com/gitlab-org/gitlab/-/commit/7eaaa597e24bf24743bdd8f8d1d51ade83b3f6de
[2] https://about.gitlab.com/releases/2020/06/22/gitlab-13-1-released/#templates-to-simplify-initial-rules-keyword-configuration
[3] https://about.gitlab.com/releases/2020/05/22/gitlab-13-0-released/#auto-devops-and-secure-configuration-templates-are-changing-to-%60rules%60-instead-of-%60only/except%60
[4] https://gitlab.com/gitlab-org/gitlab/issues/27449
[5] https://gitlab.com/groups/gitlab-org/-/epics/2783
[6] https://buildroot.org/downloads/manual/manual.html#_using_the_run_tests_framework

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Angelo Compagnucci to several packages

This patch adds some packages I contributed to my entry.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP RT kernel to version 4.19.132-cip30-rt12

This patch bumps Linux CIP RT to version 4.19.132-cip30-rt12

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP kernel to version 4.19.132-cip30

This patch bumps Linux CIP to version 4.19.132-cip30

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapi_m2_zero: new defconfig

The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.

It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.

[1]: http://www.banana-pi.org/m2z.html

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/snps_archs38_hsdk: re-enable USB support

With this patch we enable CONFIG_USB for HSDK, which is not explicitly
selected by UDL since the commit 5d50bd440bc2 ("drm/udl: Make udl
driver depend on CONFIG_USB"). Commit 4c13ca86dcf8 ("ARC:
[plat-hsdk]: fix USB regression") is not yet backported to Linux
kernel 5.6.x, so we enable this option in fragment file for HSDK.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/globalscale_espressobin: new defconfig

Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.

  http://espressobin.net

The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge.  To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.

Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/grpc: bump version to 1.30.2

Other changes:
  - Add a dependency on libabseil-cpp
  - Update the patches to apply properly.

Tested with the following distributions:
  - Debian 9
  - CentOS 7
  - Fedora 32

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libabseil-cpp new package

This package is a new dependency on grpc versions > 1.25.0

Tested with the following distributions:
  - Debian 9
  - CentOS 7
  - Fedora 32

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/debianutils: bump version to 4.11

+ updated copyright hash

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-spidev: bump to version 3.5

This patch bump python-spidev to version 3.5

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pillow: bump to version 7.2.0

This patch bump pillow to version 7.2.0. The bump requires the python
xml module available.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ltris: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/991d601b30831df61c78dc7109a2f4ab9ace3f84

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gvfs: fix linking with libmetadata

Fixes:
 - http://autobuild.buildroot.org/results/fa892c41b6b9285839a0164b000e37fb04dcc194

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/easy-rsa: bump to version 3.0.7

Update indentation in hash file (two spaces)

https://github.com/OpenVPN/easy-rsa/releases/tag/v3.0.7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cramfs: bump to version 2.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pydal: bump to version 20200714.1

this patch bumps python-pydal to version 20200714.1

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libzip: fix build with cmake < 3.16

Fixes:
 - http://autobuild.buildroot.org/results/7e996aebafa4c690ff130b7d18e5b09c7b255829

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgsasl: enable gcrypt support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgsasl: bump to version 1.8.1

- Update hash of README
- Update indentation in hash file (two spaces)

https://lists.gnu.org/archive/html/info-gnu/2020-01/msg00000.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mraa: add json-c support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gcc: bump to gcc 10.2

Remove upstream patch backported to gcc 10.2:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e86ae54172bb982e3c9d5aa62d20be5b72fe0f24

"GCC 10.2 is a bug-fix release from the GCC 10 branch
containing important fixes for regressions and serious bugs in
GCC 10.1 with more than 94 bugs fixed since the previous release."

https://gcc.gnu.org/pipermail/gcc-announce/2020/000164.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mraa: fix architecture

mraa supports aarch64 since version 0.9.0 and
https://github.com/eclipse/mraa/commit/47ec54c3330de176ed0b8e3254e81d9451fb866a

mips is supported since version 1.9.0 and
https://github.com/eclipse/mraa/commit/6770be911ba18b25ff284eeac80390e4111f602f

Moreover, BUILD_ARCH must be passed otherwise build will fail on i686
and arm

Fixes:
 - http://autobuild.buildroot.org/results/8e99eb282668f6f83f43c5be45112d82936e3408
 - http://autobuild.buildroot.org/results/75ba0840da6eb4907847ef05adeec2df109c9937

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/haproxy: fix static only build

Add a patch to avoid dlfcn.h use when the toolchain is static only.

Fixes:
http://autobuild.buildroot.net/results/98caf66e8a7f72ee24e4d39f3aab541f82310369/
http://autobuild.buildroot.net/results/3024eb48a026b1a91e39f7d996be3d7f50314762/
http://autobuild.buildroot.net/results/e6bbf1469926bde9057f270940d1455e0f758e0e/

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>