2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* inf-loop.c (inferior_event_handler): Only output a message if
verbose.

* MAINTAINERS: Update my e-mail address.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

Cope with async mode.

gdb/testsuite/
* gdb.mi/mi-break.exp (test_breakpoint_commands): Split gdb_test
into gdb_test + mi_expect_stop.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/testsuite/
* gdb.mi/basics.c: Don't include stdio.h or unistd.h.
(callme): Remove printf call.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

* infrun.c (proceed): Switch the inferior event loop to
INF_EXEC_COMPLETE if the target refused to resume from a
vfork/fork.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcmd.c: Include "inf-loop.h".
(step_once): When stepping into an inline subroutine, pretend the
target has run.  If the target can async, switch the inferior
event loop to INF_EXEC_COMPLETE.
* inferior.h (user_visible_resume_ptid): Declare.
* infrun.c (user_visible_resume_ptid): New function, factored out
from `resume'.
(resume): Use it.
* mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
that the current thread is running.  Merge async and sync
branches.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infcmd.c (step_1): Simplify synchronous case.

PR 12763
* ld-elf/tdata3.s: New test.
* ld-elf/tbss3.s: New test.
* ld-elf/binutils.exp: Consolidate tbss and tdata tests.

PR 12763
* elf.c (_bfd_elf_make_section_from_shdr): Set up TLS section LMAs
from PT_TLS header.
(_bfd_elf_map_sections_to_segments): Don't create a final PT_LOAD
segment if just for .tbss.
(assign_file_positions_for_load_sections): Don't report "can't
allocate in segment" errors for .tbss.
(assign_file_positions_for_non_load_sections): Don't set p_filesz
from SHT_NOBITS section filepos.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* tracepoint.c: Include exceptions.h.
(TFILE_PID): Move higher in file.
(tfile_open): Delay pushing the tfile target until we're assured
the tfile header is present in the file.  Wrap reading the initial
newline-terminated lines in TRY_CATCH.  Pop the target if the
initial setup failed.  Add the tfile's thread immediately
aftwards, before any non-essential setup.  Don't skip
post_create_inferior if there are no traceframes present in the
file.
(tfile_close): Remove redundant check for null before xfree call.
(tfile_thread_alive): New function.
(init_tfile_ops): Register it as to_thread_alive callback.

2011-05-20  Pedro Alves  <pedro@codesourcery.com>

gdb/
* tracepoint.c (tfile_open): Delete #if 0'd code.

* lib/gdb.exp (gdb_test_list_exact): Suggest use of double
quote pattern to avoid problems with Cygwin/mingw expect versions.
* gdb.base/default.exp (show convenience): Use double
quote pattern for regular expressions.

ld/testsuite/
* ld-tic6x/pcr-reloc.d: New test.
* ld-tic6x/pcr-reloc.s: New test.

gas/testsuite/
* gas/tic6x/pcr-relocs.d: New test.
* gas/tic6x/pcr-relocs.s: New test.
* gas/tic6x/pcr-relocs-undef.d: New test.
* gas/tic6x/pcr-relocs-undef.s: New test.
* gas/tic6x/reloc-bad-2.s: Update for pcr_offset.
* gas/tic6x/reloc-bad-2.l: Update for pcr_offset.

bfd/
* elf32-tic6x.c (elf32_tic6x_howto_table): Add entries for
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_relocate_section): Handle them.

gas/
* config/tc-tic6x.c (tic6x_operators): Add "pcr_offset".
(tic6x_parse_name): Handle it.
(tic6x_fix_new_exp): Handle O_pcr_offset.
(tic6x_fix_adjustable): Return 0 for the new relocs.
(md_apply_fix): Handle them.
(tc_gen_reloc): Likewise.
* config/tc-tic6x.h (tic6x_fix_info): Add a fix_subsy member.

gdb/
Fix -readnow for -gdwarf-4 unused type units.
* dwarf2read.c (struct signatured_type): Remove the field offset.
(create_signatured_type_table_from_index): Remove its initialization.
(create_debug_types_hash_table): Likewise.  Initialize per_cu.offset
instead.  Add a complaint call.
(process_psymtab_comp_unit): Change assignment to gdb_assert.
(process_type_comp_unit, lookup_die_type, dump_die_shallow)
(lookup_signatured_type_at_offset, read_signatured_type)
(write_one_signatured_type): Update the field for per_cu.

gdb/testsuite/
Fix -readnow for -gdwarf-4 unused type units.
* gdb.dwarf2/dw4-sig-type-unused.S: New file.
* gdb.dwarf2/dw4-sig-type-unused.exp: New file.

*** empty log message ***

daily update

* python/py-inferior.c (python_inferior_exit): Use
target_gdbarch.
(python_on_resume): Likewise.

2011-05-19  Matt Rice  <ratmice@gmail.com>

        * breakpoint.c (bpstat_do_actions_1): Call prevent_dont_repeat.

2011-05-19  Hui Zhu  <teawater@gmail.com>

* tracepoint.c (tfile_trace_find): Return directly when num is -1.

* v850-opc.c (cmpf.[sd]): Reverse the order of the reg1 and reg2
operands.

2011-05-19  Hui Zhu  <teawater@gmail.com>

* xcoffread.c (read_xcoff_symtab): Initialize fcn_aux_saved.

*** empty log message ***

* dwarf2read.c (dwarf2_add_field): Constify.
* value.c (value_static_field): Constify.
* gdbtypes.h (struct main_type) <field.field_location.physname>:
Now const.
* ax-gdb.c (gen_static_field): Constify

gdb/
* linux-nat.c (kill_callback): Use SIGKILL first.

gdb/testsuite/
* gdb.base/kill-after-signal.c: New file.
* gdb.base/kill-after-signal.exp: New file.

Remove one use of sprintf in ada-lang.c (print_it_exception)

This is just a minor cleanup of an ARI violation.  As this affects
code that is normally unreachable (you'd need a runtime where
the unit providing the exception hook has been compiled without
debugging information), I tested this manually by commenting out
the code just above, thus forcing this part of the code to be
exercised.

gdb/ChangeLog:

        * ada-lang.c (print_it_exception): Avoid use of sprintf.

Tested on x86_64-linux.

PR binutils/12753
* nm.c (filter_symbols): Treat unique symbols as global symbols.
* doc/binutils.texi (nm): Mention that some lowercase letters
actually indicate global symbols.

* lib/utils-lib.exp (run_dump_test): Allow nm as a program.
* binutils-all/nm.exp: Test running "nm -g" on an object file
containing a unique symbol.

* value.c (value_fn_field): Constify.
* symtab.c (gdb_mangle_name): Constify.
* stabsread.c (update_method_name_from_physname): Make 'physname'
argument const.
* p-typeprint.c (pascal_type_print_method_args): Make arguments
const.  Use explicit fputc_filtered loop.
(pascal_type_print_base): Constify.
* p-lang.h (pascal_type_print_method_args): Update.
* linespec.c (add_matching_methods): Constify.
(add_constructors): Likewise.
* jv-typeprint.c (java_type_print_base): Constify.
* gdbtypes.h (struct cplus_struct_type)
<fn_fieldlist.fn_field.physname>: Now const.
* dwarf2read.c (compute_delayed_physnames): Constify.
(dwarf2_add_member_fn): Likewise.
* c-typeprint.c (c_type_print_base): Constify.  Use cleanups.

* gas/arm/req.l: Updated expected warning message.

2011-05-18  Pedro Alves  <pedro@codesourcery.com>

gdb/
* infrun.c (resume): Mention which is the current thread, and its
current PC in debug output.
(prepare_to_proceed): Mention the thread switching in debug
output.

* linux-thread-db.c (try_thread_db_load_from_pdir_1): Fix absolute
path check.  Use xmalloc and cleanups.
(try_thread_db_load_from_dir): Use xmalloc and cleanups.

PR ld/12761
* elflink.c (elf_link_add_object_symbols): Process .gnu.warning
sections when building shared libraries.

* lib/ld-lib.exp (run_cc_link_tests): Add an optional 8th
parameter - an expected warning message from the linker.
* ld-elf/shared.exp (build_tests): Expect a warning message when
building the libbarw.so library.

* ld-elf/shared.exp: Run library building tests even when not
building a native toolchain.

PR gas/12754
* config/tc-tic30.c (ordinal_names): Allow translation of the
ordinal names.

PR ld/12778
* elf32-arm.c (elf32_arm_gc_sweep_hook): Use the computed dynamic
reloc pointer.

* config/tc-arm.c (s_unreq): Reword warning message to make it
easier to translate.
* config/tc-ia64.c (md_show_usage): Add note for translators.
* configure.in (ALL_LINGUAS): Add "fi".
* configure: Regenerate.

2011-05-18  Tristan Gingold  <gingold@adacore.com>

* xcofflink.c (xcoff_link_add_symbols): Handle C_DWARF symbols.
(xcoff_sweep): Always keep dwarf sections.
(xcoff_link_input_bfd): Handle dwarf symbols and sections.

bfd
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* libxcoff.h (struct xcoff_dwsect_name): New type.
(XCOFF_DWSECT_NBR_NAMES): New macro.
(xcoff_dwsect_names): Declare.
* coffcode.h (sec_to_styp_flags): Handle xcoff dwarf sections.
(styp_to_sec_flags): Ditto.
(coff_new_section_hook): Ditto.
(coff_slurp_symbol_table): Handle C_DWARF and C_INFO.
* coff-rs6000.c (xcoff_dwsect_name): New variable.

gas
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* config/tc-ppc.h (ppc_tc_sy): Reorder fields.
Put size into an union with dw.
(OBJ_COPY_SYMBOL_ATTRIBUTES): Adjust.
(ppc_xcoff_end): Declare.
(md_end): Define.
* config/tc-ppc.c: Add includes for xcoff.
(ppc_dwsect): New function.
(md_pseudo_table): Add dwsect.
(struct dw_subsection): New.
(dw_sections): New.
(ppc_change_debug_section): New function.
(ppc_xcoff_end): Ditto.
(ppc_function): Adjust for ppc_tc_sy.
(ppc_symbol_new_hook): Ditto.
(ppc_frob_symbol): Ditto.
(ppc_frob_section): Do not set vma for debug sections.
(ppc_fix_adjustable): Return true for debug sections.
* config/obj-coff.c: Add includes for xcoff.
(coff_frob_section): Handle dwarf section.

gas/testsuite
2011-05-18  Tristan Gingold  <gingold@adacore.com>

* gas/ppc/xcoff-dwsect-1-32.d: New test.
* gas/ppc/xcoff-dwsect-1-64.d: Ditto.
* gas/ppc/xcoff-dwsect-1.s: New file.
* gas/ppc/aix.exp (do_align_test): Add tests.

*** empty log message ***

daily update

* cp-valprint.c (cp_print_value_fields): Catch errors from
value_static_field.

* dwarf2read.c (dwarf2_get_die_type): Call
get_die_type_at_offset.
* dwarf2expr.c (dwarf_get_base_type): Handle NULL return from
get_base_type function.

* po/fi.po: New Finnish translation.
* po/fr.po: Updated French translation.

* config/tc-m32r.c (md_show_usage): Fix typos in descriptions.
* config/tc-mt.c (md_assemble): Fix typos in warning messages.
* cond.c (s_else): Fix typos in error messages.
* config/tc-pj.c (md_assemble): Fix typo in error message.

* strsignal.c (psignal): Change second parameter to const char *.
Fix comment accordingly.

PR ld/12759
* emultempl/rxelf.em (ignore_lma): New variable.
(rx_elf_create_output_section_statements): Pass the setiing of
ignore_lma to bfd_elf32_rx_set_target_flags.
(OPTION_IGNORE_LMA): Define.
(OPTION_NO_IGNORE_LMA): Define.
(PARSE_AND_LIST_LONGOPTS): Add ignore lma.
(PARSE_AND_LIST_OPTIONS): Add ignore lma.
(PARSE_AND_LIST_ARGS_CASES): Add ignore lma.

* elf32-rx.c (ignore_lma): New variable.
(bfd_elf32_rx_set_target_flags): Add ignore_lma parameter.
(rx_modify_program_headers): Only copy the LMA into the VMA if
ignore_lma is true.

2011-05-17  Pedro Alves  <pedro@codesourcery.com>

gdb/doc/
* gdb.texinfo (Remote Protocol) <Overview>: Mention vCont is
required for multi-threading support.
(Remote Protocol) <Packets>: Mention that 'c', 's', 'C', 'S' and
Hc are deprecated for multi-threading debugging.  Point readers at
the vCont packet.

PR ld/12760
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Add "flags" and
"string" param.
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Adjust "notice" call.
* elflink.c (elf_link_add_object_symbols): Likewise.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
ld/
* ldmain.c (notice): Add "flags" and "string" param.
* plugin.c (plugin_notice): Likewise.  Handle indirect, warning
and constructor syms.

2011-05-17  Tomas Martinec  <fyzmat@gmail.com>

gdb/
* infrun.c (handle_inferior_event) <handling deferred step>: Clear
trap_expected.

*** empty log message ***

daily update

* options.h (class General_options): Make -i a synonym for -r.

* testsuite/tls_test_main.cc: Use semaphores instead of mutexes.

sim: tests: support .S/.c files

Rather than requiring all sim tests to be preprocessed .s files, add
support for .S and .c files so we can easily write code using a higher
level language like C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* python/py-auto-load.c (source_section_scripts): Mention objfile
name in warning.

2011-05-16  Adrian Cornish  <gnu@bluedreamer.com>

* linux-i386-ipa.c (supply_static_tracepoint_registers): Pass
__FILE__ and __LINE__ to internal_error.

2011-05-16  Pedro Alves  <pedro@codesourcery.com>

gdb/testsuite/
* gdb.ada/start.exp: Call untested with the correct test filename.
* gdb.arch/i386-bp_permanent.exp: Call untested with the correct
test filename.  Make the test's binary unique.
* gdb.arch/i386-signal.exp: Call untested with the correct test
filename.
* gdb.arch/i386-size-overlap.exp: Ditto.
* gdb.arch/Makefile.in (EXECUTABLES): Update.
* gdb.base/gcore-buffer-overflow.exp: Ditto.
* gdb.cp/call-c.exp: Ditto.
* gdb.mi/mi-reverse.exp: Call untested with the correct test
filename.  Make the test's binary unique.
* gdb.mi/Makefile.in (EXECUTABLES): Update.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/Makefile.in (EXECUTABLES): Update.
* gdb.reverse/i386-precsave.exp: Ditto.
* gdb.reverse/i387-env-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/i387-stack-reverse.exp: Ditto.
* gdb.reverse/sigall-precsave.exp: Ditto.  Make the test's binary
unique.
* gdb.reverse/sigall-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/Makefile.in (EXECUTABLES): Update.
* gdb.trace/tfile.exp: Ditto.

Replace --private with --private-headers for objdump.

2011-05-16  H.J. Lu  <hongjiu.lu@intel.com>

* ld-scripts/phdrs.exp: Replace --private with
--private-headers for objdump.
* ld-scripts/phdrs2.exp: Likewise.

Missing entry.

2011-05-15  Tristan Gingold  <gingold@adacore.com>

* od-xcoff.c: New file.
* objdump.h: New file.
* objdump.c: Include objdump.h
(dump_private_options, objdump_private_vectors): New variables.
(usage): Mention -P/--private.  Display handled options.
(long_options): Add -P/--private.
(dump_target_specific): New function.
(dump_bfd): Handle dump_private_options.
(main): Handle -P.
* doc/binutils.texi (objdump): Document -P/--private.
* configure.in (OBJDUMP_PRIVATE_VECTORS, OBJDUMP_PRIVATE_OFILES):
New variables, compute them.
(od_vectors): Add vectors for private dumpers. Make them uniq.
(OBJDUMP_DEFS): Add OBJDUMP_PRIVATE_VECTORS.
* Makefile.am (HFILES): Add objdump.h
(CFILES): Add od-xcoff.c
(OBJDUMP_PRIVATE_OFILES): New variable.
(objdump_DEPENDENCIES): Append OBJDUMP_PRIVATE_OFILES.
(objdump_LDADD): Ditto.
(EXTRA_objdump_SOURCES): Define.
* Makefile.in: Regenerate.
* configure: Regenerate.

2011-05-16  Tristan Gingold  <gingold@adacore.com>

* od-xcoff.c: New file.
* objdump.h: New file.
* objdump.c: Include objdump.h
(dump_private_options, objdump_private_vectors): New variables.
(usage): Mention -P/--private.  Display handled options.
(long_options): Add -P/--private.
(dump_target_specific): New function.
(dump_bfd): Handle dump_private_options.
(main): Handle -P.
* doc/binutils.texi (objdump): Document -P/--private.
* configure.in (OBJDUMP_PRIVATE_VECTORS, OBJDUMP_PRIVATE_OFILES):
New variables, compute them.
(od_vectors): Add vectors for private dumpers. Make them uniq.
(OBJDUMP_DEFS): Add OBJDUMP_PRIVATE_VECTORS.
* Makefile.am (HFILES): Add objdump.h
(CFILES): Add od-xcoff.c
(OBJDUMP_PRIVATE_OFILES): New variable.
(objdump_DEPENDENCIES): Append OBJDUMP_PRIVATE_OFILES.
(objdump_LDADD): Ditto.
(EXTRA_objdump_SOURCES): Define.
* Makefile.in: Regenerate.
* configure: Regenerate.

* ldlang.c (print_assignment): Use the symbol's section if we
use its value.
* ldexp.c (exp_fold_tree_1): Skip self-assignment.  Expand
comment on copying symbol type.

* gas/cris/rd-brokw-pic-1.d, gas/cris/rd-brokw-pic-2.d,
gas/cris/rd-fragtest-pic.d: Gate on targets cris-*-*elf* and
cris-*-linux-gnu.
* gas/cris/pic-err-2.s, gas/cris/pic-err-3.s: New tests.

* config/tc-cris.c (md_parse_option) <OPTION_PIC>: Error if not
emitting ELF object.
(md_show_usage): Only mention --pic if the assembler can generate
ELF objects.
* doc/c-cris.texi (CRIS-Opt): Mention that generating ELF is a
prerequisite for --pic being a valid option.

* linux-thread-db.c (try_thread_db_load_from_pdir_1): New function.
(try_thread_db_load_from_pdir): Call it.  If unable to find
libthread_db in directory of libpthread, see if we're looking at
the separate-debug-info copy.

PR ld/12760
* plugin.c (plugin_notice): Set u.undef.abfd for symbols made
undefweak.

* ldlang.c (lang_leave_output_section_statement): Don't copy
previous lma_region if given address.

*** empty log message ***

daily update

include/
* bfdlink.h (struct bfd_link_hash_entry): Remove u.undef.weak field.
bfd/
* linker.c (_bfd_generic_link_add_one_symbol): Don't init u.undef.weak.

bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Record both local and
global GOT entries for GOT_PAGE relocations against global symbols.

ld/testsuite/
* lib/ld-lib.exp (run_ld_link_tests): Simplify pass/fail logic.
Fail if the link command fails and if no test rules are defined.
* ld-mips-elf/reloc-6a.s, ld-mips-elf/reloc-6b.s: New tests.
* ld-mips-elf/mips-elf.exp: Run them.

* python/py-autoload.c (print_script): Print "Missing" instead of
"No" for missing scripts.
(info_auto_load_scripts): Tweak "Loaded" column to fit "Missing".

doc/
* gdb.texinfo (Auto-loading): Document printing of missing scripts.

*** empty log message ***

daily update

sim: bfin: allow pushing of SP

The hardware respects this insn, and some code (like the on-chip bootrom)
uses it, so allow it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: implement loop back support in the UARTs

The UART has a LOOP_ENA bit in its MCR register where writes to the THR
go to the RBR.  Implement support for this mode.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-05-14  Yao Qi  <yao@codesourcery.com>

* gdb.trace/tfile.c(add_memory_block): Store address in unsigned
type.

* ui-file.c (stdio_file_write_async_safe): Add comment.

2011-05-14  Hui Zhu  <teawater@gmail.com>

* ui-file.c (stdio_file_write_async_safe): Add empty check for build.

* gas/all/gas.exp: Fix typo last change.

*** empty log message ***

daily update

Support $pdir and $sdir in libthread-db-search-path.
* NEWS: Mention $sdir,$pdir.
* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
* linux-thread-db.c (try_thread_db_load_from_pdir): New function.
(try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $pdir, $sdir.  Remove trying of
system directories if search of libthread-db-search-path fails,
that is now done via $sdir.
(has_libpthread): New function.
(thread_db_load): Remove search for libthread_db in directory of
libpthread, that is now done via $pdir.

gdbserver/
* thread-db.c (try_thread_db_load_from_sdir): New function.
(try_thread_db_load_from_dir): New function.
(thread_db_load_search): Handle $sdir, ignore $pdir.
Remove trying of system directories if search of
libthread-db-search-path fails, that is now done via $sdir.

doc/
* gdb.texinfo (Threads): Document $sdir,$pdir.
(Server): Document $pdir exception.

* NEWS: Mention "info auto-load-scripts".
* python/py-auto-load.c (struct auto_load_pspace_info): New member
script_not_found_warning_printed.
(init_loaded_scripts_info): Renamed from create_loaded_scripts_hash,
all callers updated.  Initialize script_not_found_warning_printed.
(get_auto_load_pspace_data_for_loading): New function.
(maybe_add_script): New function.
(source_section_scripts): Simplify.  Only print one warning regardless
of the number of auto-load scripts not found.
(clear_section_scripts): Clear script_not_found_warning_printed.
(auto_load_objfile_script): Record script in hash table.
(count_matching_scripts): New function.
(maybe_print_script): Renamed from maybe_print_section_script, all
callers updated.  Rewrite to use ui_out_*.
(info_auto_load_scripts): Renamed from
maintenance_print_section_scripts, all callers updated.
(gdbpy_initialize_auto_load): "maintenance print section-scripts"
renamed as "info auto-load-scripts".

doc/
* gdb.texinfo (Auto-loading): Document "info auto-load-scripts".

testsuite/
* gdb.python/py-objfile-script.exp: New file.
* gdb.python/py-objfile-script.c: New file.
* gdb.python/py-objfile-script-gdb.py: New file.
* testsuite/gdb.python/py-section-script.exp: Test
"info auto-load-scripts".

fix >80 cols in earlier entry

fix >80 column entry in earlier entry

gdb
* dwarf2expr.c (read_uleb128): Cast intermediate result.
(read_sleb128): Likewise.
gdb/testsuite
* gdb.dwarf2/clztest.exp: New file.
* gdb.dwarf2/clztest.c: New file.
* gdb.dwarf2/clztest.S: New file.

* gdb.texinfo (Threads): Clarify default value for libthread-db-search-path.

* dwarf2loc.c (disassemble_dwarf_expression): Fix instruction
offset display.

* gdb.base/charset.exp: If UTF-16 is not available, skip char16_t, String16 tests.

ld/
(eelf32_tic6x_linux_be.c, eelf32_tic6x_linux_le.c,
eelf32_tic6x_elf_be.c, eelf32_tic6x_elf_le.c): New rules.
* Makefile.am (ALL_EMULATIONS): Add these files.
(eelf32_tic6x_be.c, eelf32_tic6x_le.c): Depend on tic6xdsbt.em.
* Makefile.in: Regenerated.
* emultempl/tic6xdsbt.em (is_tic6x_target): Allow more tic6x target
vectors.
* emulparams/elf32_tic6x_elf_be.sh: New file.
* emulparams/elf32_tic6x_elf_le.sh: New file.
* emulparams/elf32_tic6x_linux_be.sh: New file.
* emulparams/elf32_tic6x_linux_le.sh: New file.
* configure.tgt (tic6x-*-elf, tic6x-*-uclinux): New.
(tic6x-*-*): Replaced by these.

ld/testsuite/
* ld-tic6x/dsbt.ld (OUTPUT_FORMAT): Add.
* ld-tic6x/tic6x.exp: Add OSABI tests.

bfd/
* config.bfd (tic6x-*-elf, tic6x-*-uclinux): New.
(tic6x-*-*): Replaced by these.
* elf32-tic6x.c (elf32_tic6x_set_osabi): New static function.
(elf32_tic6x_check_relocs): Create dynamic sections if -shared.
(elf_backend_relocs_compatible, elf_backend_post_process_headers):
Define.
(elf32_bed, TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, TARGET_BIG_SYM,
TARGET_BIG_NAME, ELF_OSABI): Redefine twice, and include
"elf32-target.h" two more times.
* configure.in: Handle bfd_elf32_tic6x_linux_be_vec,
bfd_elf32_tic6x_linux_le_vec, bfd_elf32_tic6x_elf_be_vec and
bfd_elf32_tic6x_elf_le_vec.
* configure: Regenerate.

* linux-nat.c (debug_linux_nat_async): Delete.
Replace all references to use debug_linux_nat instead.
(show_debug_linux_nat_async): Delete.
(sigchld_handler): Call ui_file_write_async_safe instead of
fprintf_unfiltered.
(_initialize_linux_nat): Remove `set debug lin-lwp-async'.
* ui-file.c (struct ui_file): New member to_write_async_safe.
(null_file_write_async_safe): New function.
(ui_file_write_async_safe): New function.
(set_ui_file_write_async_safe): New function.
(ui_file_new): Initialize to_write_async_safe.
(stdio_file_write_async_safe): New function.
(struct stdio_file): New member fd.
(stdio_file_new): Initialize to_write_async_safe, fd.
(stdio_file_read, stdio_file_isatty): New stdio->fd instead of calling fileno.
* ui-file.h (ui_file_write_async_safe_ftype): New typedef.
(set_ui_file_write_async_safe): Declare.
(ui_file_write_async_safe): Declare.

doc/
* gdb.texinfo (Completion): Update example.
(Debugging Output): Delete `set/show debug lin-lwp-async'.

* lib/gdb.exp (is_x86_like_target): New proc.
* gdb.dwarf2/watch-notconst.exp: Use is_x86_like_target.
* gdb.dwarf2/valop.exp: Use is_x86_like_target.
* gdb.dwarf2/typeddwarf.exp: Use is_x86_like_target.  Pass
-nostdlib to compiler.
* gdb.dwarf2/typeddwarf.S (_start): Rename from 'main'.
* gdb.dwarf2/pieces.exp: Use is_x86_like_target.
* gdb.dwarf2/implptr.exp: Use is_x86_like_target.
* gdb.dwarf2/dw2-restore.exp: Check for LP64.
* gdb.dwarf2/callframecfa.exp: Use is_x86_like_target.

* utils.c (do_value_free): New function.
(make_cleanup_value_free): Likewise.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle value
freeing correctly.
(dwarf2_loc_desc_needs_frame): Call
make_cleanup_value_free_to_mark.
* dwarf2expr.h (struct dwarf_expr_context) <mark>: Remove field.
* dwarf2expr.c (free_dwarf_expr_context): Don't call
value_free_to_mark.
(new_dwarf_expr_context): Don't call value_mark.
* dwarf2-frame.c (execute_stack_op): Call
make_cleanup_value_free_to_mark.
* defs.h (make_cleanup_value_free): Declare.

bfd/
2011-05-13  Jan Beulich  <jbeulich@novell.com>

* config.bfd: Add targets x86_64-*-pe and x86_64-*-pep.

ld/
2011-05-13  Jan Beulich  <jbeulich@novell.com>

* configure.tgt: Add targets x86_64-*-pe and x86_64-*-pep.

missed changelog from last commit

gdb/
* mi/mi-main.c (mi_cmd_execute): Use cleanup from
prepare_execute_command.
* top.c (prepare_execute_command): Return cleanup.
(execute_command): Use cleanup from prepare_execute_command.
* top.h (prepare_execute_command): Change prototype to return
cleanup.
* defs.h (struct value): Add opaque declaration.
(make_cleanup_value_free_to_mark): Add prototype.
* utils.c (do_value_free_to_mark): New function.
(make_cleanup_value_free_to_mark): Likewise.

gdb/testsuite/
* gdb.python/py-function.exp: Test setting a value from a function
which executes a command.

* ld-elf/flags1.d: Don't xfail tic6x.
* ld-scripts/weak.exp: Correct comments.  Don't xfail sh-pe.  Remove
redundant xfail.
* ld-selective/sel-dump.exp: Don't xfail alpha.
* ld-selective/selective.exp: Run for alpha.
* ld-undefined/weak-undef.exp: Don't xfail hppa64.

* gas/all/gas.exp: Remove some xfails on redef2 and redef3 tests.
Update comments.
* gas/hppa/unsorted/unsorted.exp: Run globalbug test on appropriate
targets rather than xfailing.

* binutils-all/objcopy.exp objcopy_text): Remove xfails for sh-rtems
and tic4x.

*** empty log message ***

daily update

PR gas/12755
* config/tc-v850.c (parse_register_list): Correct error string.