package/gnuradio: re-enable gr-qtgui

Since commit fcd9c85475b65c6e8f22d5f9b4ac7c7ecb93dc6a, gr-qtgui has
been removed because this Qt GUI was based on Qt4 which was no longer
supported by Buildroot.

However, gnuradio 3.8 brings a Qt5-based GUI, and therefore the option
BR2_PACKAGE_GNURADIO_QTGUI can be re-introduced.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus: fix group and mode for the launcher

The D-Bus installation process installs dbus-daemon-launch-helper as
follows:

  chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
  chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \

And when the installation does not take place as root (like is the
case in the context of Buildroot), it prints:

  echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
  echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \

So let's adjust the installation logic of dbus-daemon-launch-helper to
match these requirements.

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openssh: add optional dependency on audit

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libxml2: remove helper script from target

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/syslog-ng: drop unused systemd file

Commit 54ea03ccd7d68bcf846a7cb8fa58b9fb3ac0b914 ("package/syslog-ng:
implement systemd enablement using DefaultInstance") replaced the lines
installing the syslog-ng@default file with printf lines creating a file
in a syslog-ng@.service.d/ directory on-the-fly.  Since then, nothing
uses the syslog-ng@default file, so let's delete it.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/iproute2: add optional dependencies on libselinux and libcap

The configure script will automatically detect used pkg-config if
libcap or libselinux are available.

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/edid-decode: fix build with gcc <= 5

Pass -std=c++11 to fix the following build failure with gcc <= 5:

/tmp/instance-0/output-1/host/bin/mips64el-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os       -Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -g -DSHA="not available" -o edid-decode edid-decode.cpp parse-base-block.cpp parse-cta-block.cpp parse-displayid-block.cpp parse-ls-ext-block.cpp parse-di-ext-block.cpp parse-vtb-ext-block.cpp -lm
edid-decode.cpp: In member function 'std::__cxx11::string edid_state::dtd_type()':
edid-decode.cpp:192:17: error: 'to_string' is not a member of 'std'
  unsigned len = std::to_string(preparse_total_dtds).length();
                 ^

Also add a dependency on gcc 4.7

Fixes:
 - http://autobuild.buildroot.org/results/71e4a50542c4551797f1d0404d27244612b427d7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/edid-decode: use TARGET_CONFIGURE_OPTS

Do not use CXX to set the "$(TARGET_CXX) $(TARGET_CXXFLAGS)
$(TARGET_LDFLAGS)" variables and instead use TARGET_CONFIGURE_OPTS to
pass variables using the "standard" variables.

LDFLAGS is supported since
https://git.linuxtv.org/edid-decode.git/commit/?id=0a454bcbba5e172c64236811ed98c161689372f1

CFLAGS is supported since
https://git.linuxtv.org/edid-decode.git/commit/?id=b202b675e38578b33494fc45c2869917e66ba22d

edid-decode did not switch CFLAGS to CXXFLAGS in
https://git.linuxtv.org/edid-decode.git/commit/Makefile?id=e00579c128ced87a69df29a01caaaf0cd4a4c8cc
so use CFLAGS to pass TARGET_CXXFLAGS

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual/adding-packages-generic.txt: fix typo

LIBTOO_SOURCE -> LIBFOO_SOURCE

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pango: add gobject-introspection support

This will fix the following build failure when enabling introspection on
libgtk2:

Couldn't find include 'Pango-1.0.gir' (search path: '['/home/fabrice/buildroot/output/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/home/fabrice/buildroot/output/host/share', '/usr/share/gnome/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/fabrice/buildroot/output/host/share/gir-1.0', '/usr/share/gir-1.0']')

Fixes:
 - http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdk-pixbuf: add gobject-introspection support

This will fix the following build failure when enabling introspection on
libgtk2:

Couldn't find include 'GdkPixbuf-2.0.gir' (search path: '['/tmp/instance-0/output-1/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/tmp/instance-0/output-1/host/share', 'gir-1.0', '/tmp/instance-0/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')

Fixes:
 - http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnetconf2: add patch to fix incompatiblity with libssh

The libnetconf2 upstream project rejects building with ssh support for
libssh 0.9.3 and 0.9.4 due to an existing regression.

This libssh regression bug is already fixed upstream. The libssh buildroot
package has the patch (39099153d9404cd6f107f0fd92ce8686bbd1beb2).

Thus we can remove the libnetconf2 cmake check.

Fixes:
http://autobuild.buildroot.net/results/f72fcccafe70ecb6b2ba21e8d19c5827a09ffec7/

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/upx: security bump to version 3.96

- Switch site to github to get latest release
- Fix CVE-2019-20805: p_lx_elf.cpp in UPX before 3.96 has an integer
  overflow during unpacking via crafted values in a PT_DYNAMIC segment.
- Fix CERT-FI Case 829767 UPX command line tools segfaults.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/upx: use HOST_CONFIGURE_OPTS

Use HOST_CONFIGURE_OPTS to pass CPPFLAGS and LDFLAGS

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ethtool: bump to 5.7

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ethtool: add patch to fix build failures

Add a patch from the kernel netdev mailing list [1] that solves
autobuilder failures.

Fixes:
http://autobuild.buildroot.net/results/394e846bb48a0cc8564ebc3e8d1179ccd1f1560d/

[1] https://patchwork.ozlabs.org/project/netdev/patch/bb60cbfe99071fca4b0ea9e62d67a2341d8dd652.1590707335.git.mkubecek@suse.cz/

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi: bump version to 18.7.1

Release notes: https://github.com/xbmc/xbmc/releases/tag/18.7.1-Leia

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netsurf: bump to version 3.10

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/moarvm: bump to version 2020.05

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

fs/ubi: expose BINARIES_DIR to ubinize.cfg

It is often necessary to refer to other images that are present in
BINARIES_DIR from a custom ubinize configuration e.g. to include the
kernel in a UBI volume.

As we do for BR2_ROOTFS_UBIFS_PATH, replace BINARIES_DIR when copying
the file.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[yann.morin.1998@free.fr:
  - add the blurb in the help text
  - rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libdrm: fix build failure

Add patch to fix build failure with Sourcery Codebench toolchain.

The patch is provided upstream:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/75

Fixes:
http://autobuild.buildroot.net/results/b7910460015b077fcb2431da608c34f95c2f2fbb/

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/redis: add optional support for systemd

- Use the unit type=notify (Redis contacts systemd when ready)
- Start redis with the supervised option, so it knows it should
  talk to systemd
- USE_SYSTEMD is not documented, but it is used in the src/Makefile

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain USE_SYSTEMD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/redis: add optional support for TLS connections

TLS support is only enabled when BUILD_TLS is set to 'yes'. Anoy other
value, as well as empty or not set, will disable TLS. However, for
consistency with the rest of the code (e.g. for autotools packages where
we use both the --enable and --disable flags), we explcitly pass
BUILD_TLS=no. This also avoids an environment variable to leak into the
build.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain the =no case]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: add runtime test for Redis

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/redis: bump to version 6.0.4

- Update dependencies in Config.in because of new requirements
- Update the help text in Config.in to a more recent wording
- Update the hash file to the new 2 spaces convention

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr:
  - rewrap help text
  - wrap long depends line in comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libhttpserver: bump to version 0.18.0

- Remove patch (already in version)
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libhttpserver: disable examples

examples are enabled by default since version 0.17.5 and
https://github.com/etr/libhttpserver/commit/012d014a7c52ef91a35c521d5d4f83ee11de5068

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

linux: introduce BR2_KERNEL_DTB_KEEP_DIRNAME

In linux, newer architectures like ARM64 and RISC-V keep their device
tree sources organized by subdirectories. When these device trees are
installed by the kernel they will keep the directory names. But
buildroot strips the prefixes when installing them into /boot or the
images directory.
Sometimes the bootloader references the device tree by name (e.g.
u-boot has the environment variable 'fdtfile') which also includes
the prefix directory.
Make it possible to keep this prefix during installation, so we can
be compatible with other distributions and make it easier for the
user, because he doesn't have to change that environment variable.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gloox: fix build on musl

Fixes:
 - http://autobuild.buildroot.org/results/a61a91bb6e1156eff5fb756f9dccfc2bb6c0f277

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-markdown2: drop patches

On master, commit 544007dcc4 itroduced patches to fix CVE-2020-11888.
On next, commit 604fe08806 itroduced the exact same patches for the
exact same reason.

But on next, commit 81b3fd8654 bumped the version and dropped the
patches.

When next was merged into master in commit a6569f2b3d, the patches
introduced by 544007dcc4 (on master) were retained.

Fixes:
 - http://autobuild.buildroot.org/results/bf305c78dddd035b97e88943a1d19a8ceb6b41f7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: rewrite commit log with detailed explanations]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

{linux, linux-headers}: add version 5.7

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openssh: bump to version 8.3p1

Format hash file with two spaces separators.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/msmtp: bump to version 1.8.11

Format hash file with two spaces delimiters.

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-timedate: bump to version 2.33

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-path-tiny: bump to version 0.114

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-mozilla-ca: bump to version 20200520

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-net-dns: bump to versionn 1.24

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-json-maybexs: bump to version 1.004002

now, LICENSE has its own file

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-http-message: bump to version 6.24

LICENSE diff:
- This software is copyright (c) 1994-2017 by Gisle Aas.
+ This software is copyright (c) 1994 by Gisle Aas.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-exporter-tiny: bump to version 1.002002

LICENSE diff:
- This software is copyright (c) 2018 by Toby Inkster.
+ This software is copyright (c) 2020 by Toby Inkster.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-date-manip: bump to version 6.82

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/perl-http-daemon: bump to version 6.12

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ell: needs headers >= 4.12

ell needs headers >= 4.12 since version 0.31 and
https://git.kernel.org/pub/scm/libs/ell/ell.git/commit?id=fa950995a48bbcd8f0d3dfbbe9a7f768aba5c50f

Indeed NLM_F_CAPPED, NLM_F_ACK_TLVS, NLMSGERR_ATTR_MSG and
NETLINK_EXT_ACK are only available since
https://github.com/torvalds/linux/commit/2d4bc93368f5a0ddb57c8c885cdad9c9b7a10ed5

So add this dependency to ell and its reverse dependencies

Fixes:
 - http://autobuild.buildroot.org/results/bafc0ee2a3bcb2418a3612da38eb9dcd586b57d4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

boot/grub2: Fix GRUB i386-pc build with Ubuntu gcc

Backport a patch from upstream to fix the build on certain versions of
gsc, notably:

    Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
    Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008

The upstream patch is simply a change in the gentpl.py script, which is
used to generate parts of the automake machinery, so if we just backport
the upstream patch, we need to call the script to regenerate those files.

However, the modified script is a python script, so we would need to add
a dependency on host-python (2 or 3), which is not so nice.

Furthermore, calling the script is not enough: it needs a specific set
of optionss for each file it is to generate. That set of options is not
static; it is constructed in the convoluted autogen.sh. Calling
autogen.sh is usally not so good an idea in the Buildroot context, and
indeed this fails becasue it calls to autoreconf, but without our
carefuly crafted options and environment variables.

There was a little light in the tunnel, in that autogen.sh can be told
not to run autoreconf, by setting the environemnt variable
FROM_BOOTSTRAP to an non-=empty string, but this is fraught with various
other side-effects, as in that cause, autogen.sh expects to be valled by
an upper sciopt, bootstrap, which is not provided in the tarball
distribution...

So, between all those issues, autogen, bootstrap, and a host-python (2
or 3) dependency, we choose another route: path the script *and* the one
generated file affected by the change. Since that patched file is a .am
file, we also patch the corresponding .in file

However, we're faced with another issue: the other generated file is
now older than the script, so the automake machinery will now want to
re-run autoconf et al during the build step, which is still not a good
idea for us. So we touch the other generated file so it is mopre recent
than the script.

This is still not sufficient, because the patched file also has a
dependency on the generated file, so we need to touch as well.

Fixes:
 - https://bugs.buildroot.org/show_bug.cgi?id=12946

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
  - keep the hunk about patching gentpl.py
  - make it a git-formatted patch
  - add the touch
  - drastically expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gloox: disable tests and examples

Fixes:
http://autobuild.buildroot.net/results/91385a34c80c5043519e96395e203eef662ac18d/

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/prosody: use correct bit32 package"

This reverts commit fa84c176c2148a60103e850204180f86aa5baa73 that
replace luabitop by lua_bit32 package when lua 5.1 is used.

Since this change the prosody test in gitlab is fail due to
missing lua-bitops [1]:

Starting prosody:
**************************
Prosody was unable to find lua-bitops
This package can be obtained in the following ways:

    Source:           http://bitop.luajit.org/
    Debian/Ubuntu:    sudo apt-get install lua-bitop
    luarocks:         luarocks install luabitop

WebSocket support will not be available
More help can be found on our website, at https://prosody.im/doc/depends
**************************

The upstream documentation [2] is misleading (or not uptodate)
about lua-bit32 dependency.

Since bitop is builtin since lua5.2, we probably need to select
luabitop package only when lua 5.1 is used as lua interpreter.

Tested with run-tests:
./support/testing/run-tests tests.package.test_prosody.TestProsodyLua51

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/576271975
[2] https://prosody.im/doc/depends#bitop

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/axel: bump version to 2.17.9

Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/valgrind: bump version to 3.16.0

- removed 0003-mips-fix-mips32r6-and-mips64r6-compilation-issue.patch
  (backport from upstream commit [1])

[1] https://sourceware.org/git/?p=valgrind.git;a=commit;h=50dd9600ab1ad8933704ee85289191d9c65ba444

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: bump version to 2.64.3

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fluidsynth: bump to version 2.1.3

Changes since v2.1.2:
https://github.com/FluidSynth/fluidsynth/releases/tag/v2.1.3
- fix a cross-compilation failure from Win32 to WinARM
- fix issues while fluid_player is seeking
- fix a NULL pointer dereference if synth.dynamic-sample-loading is enabled
- fix a NULL pointer dereference in delete_rvoice_mixer_threads()
- fix a NULL pointer dereference in the soundfont loader
- fix dsound driver playing garbage when terminating fluidsynth
- avoid memory leaks when using libinstpatch

./utils/test-pkg --package fluidsynth
6 builds, 1 skipped, 0 build failed, 0 legal-info failed

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/doxygen: bump version to 1.18.18

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mosquitto: bump to v1.6.10

This release fix some bugs in the broker and client libraries,
as well as building with below C99 suport.

Read the whole announcement on:
https://mosquitto.org/blog/2020/05/version-1-6-8-released/

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libqmi: bump to 1.24.14

* libqmi-glib:
   ** Fix build with GLib < 2.44.
   ** Fix UTF-8 string validation when the string contains a trailing NUL byte
      (e.g. the Sierra specific "DMS Swi Get Current Firmware" command).

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ethtool: bump to 5.6

- Now by default ethtool depends on libmnl so make this optional

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/edid-decode: bump version to 1889504

- edid-decode changed from C to C++, adjust make command
  accordingly and add BR2_INSTALL_LIBSTDCPP dependency

- now shipping a LICENSE file, change from (gone) edid-decode.c to this one

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl: security bump to version 5.30.3

Fixes the following security issues:

[CVE-2020-10543] Buffer overflow caused by a crafted regular
                 expression

[CVE-2020-10878] Integer overflow via malformed bytecode produced by a
                 crafted regular expression

[CVE-2020-12723] Buffer overflow caused by a crafted regular
                 expression

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iwd: bump version to 1.7

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ell: bump version to 0.31

- removed 0001-ell-ecc.h-fix-build-with-uclibc.patch
  (upstream applied [1])

- update 0002-ell-rtnl-fix-compile-with-older-toolchains.patch
 (add upstream link)

[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=aa30f1884cf72d590fdca1db11d4fb2c2d526141

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lcms2: bump to version 2.10

- Drop patch (already in version)
- Update indentation in hash file (two spaces)
- Update hash of COPYING (update in year:
  https://github.com/mm2/Little-CMS/commit/4ba97f4b686c9988b7632638f915ead64fb6cd69)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysrepo: bump version to 1.4.66

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libyang: bump to version 1.0.176

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnetconf2: bump to version 1.1.26

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/strace: bump to version 5.7

Drop upstream patch.

Fixes:
http://autobuild.buildroot.net/results/ca298d6543c07efbf77f2adeb4832bbac00ae73f/
http://autobuild.buildroot.net/results/f26a4f2bb5a9b25739e55be5e5ded2b83a0937ac/
http://autobuild.buildroot.net/results/53d6dac4047742ae2acd682a0dd97d986ba611bb/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libresslL: bump version to 3.1.2

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rt-tests: bump to version 1.8

Drop patch #1. libnuma is now a mandatory dependency. The ostype and
machinetype variables are not used for the Linux target.

Drop patch #3. SH is not a supported target architecture anymore.

Add mandatory dependency on libnuma (numactl). Propagate numactl
architecture dependency.

Update homepage link. The kernel wiki is dead.

Drop Python build time dependency. Python is an optional run-time
dependency.

Add reference to upstream provided tarball hash.

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/numactl: add BR2_PACKAGE_NUMACTL_ARCH_SUPPORTS

For use in other packages that select numactl.

Cc: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-django: security bump to version 3.0.7

Fixes the following security issues:

- CVE-2020-13254: Potential data leakage via malformed memcached keys

  In cases where a memcached backend does not perform key validation,
  passing malformed cache keys could result in a key collision, and
  potential data leakage.  In order to avoid this vulnerability, key
  validation is added to the memcached cache backends.

- CVE-2020-13596: Possible XSS via admin ForeignKeyRawIdWidget

  Query parameters for the admin ForeignKeyRawIdWidget were not properly URL
  encoded, posing an XSS attack vector.  ForeignKeyRawIdWidget now ensures
  query parameters are correctly URL encoded.

For details, see the announcement:
https://docs.djangoproject.com/en/dev/releases/3.0.7/

Additionally, 3.0.5..3.0.7 contains a number of non-security related
bugfixes.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pciutils: bump to version 3.7.0

Use CROSS_COMPILE for toolchain prefix. Makefile derives CC, AR, and
RANLIB from that.

Remove sed manipulation of the lib/configure script. Host uname is not
used when the HOST variable is set as we do.

Remove sed manipulation of Makefile. Set STRIP to an empty string
instead.

Format hash file with two space separators.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: change from FTP to HTTPS for official releases

The HTTPS URL seems to be more reliable and quicker for download than
FTP.  FTP may also be a blocked protocol on some sites and in CI/CD
setups.

Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website: update for 2020.02.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.02.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d42f3adaae24a6aa3abc2de4f39fa8023f971d31)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bcm2835: bump version to 1.65

Changes since 1.63:
 - 1.64 2020-04-11 Fixed error in definitions of BCM2835_AUX_SPI_STAT_TX_LVL
   and BCM2835_AUX_SPI_STAT_RX_LVL
 - 1.65, 1.66 2020-04-16 Added support for use of capability cap_sys_rawio
   to determine if access to /dev/mem is available for non-root users

That latter part (using capabilities) is not supported, because it is
broken upstream (the code is messed up using two similar #defines to
test and enable it; messy...) Since it previously required root access
to work, and still does now, this is not a regression, so do not add
support for capablities.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: explain why we don't support capabilities]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bcm2835: disable doxygen doc generation

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/nodejs: security bump to 12.18.0

This is a security release.

Vulnerabilities fixed:

CVE-2020-8172: TLS session reuse can lead to host certificate verification bypass (High).
CVE-2020-11080: HTTP/2 Large Settings Frame DoS (Low).
CVE-2020-8174: napi_get_value_string_*() allows various kinds of memory corruption (High).

See https://nodejs.org/en/blog/release/v12.18.0/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/nghttp2: security bump version to 1.41.0

Fix CVE-2020-11080 Denial of service: Overly large SETTINGS frames

Signed-off-by: Martin Bark <martin@barkynet.com>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qemu: remove uneeded upstream patches

Although those patches were properly dropped when the origianl bump was
applied to the next branch (commit 4675c7d441), both net and master also
had a commit that moved the patches around when the csku fork was
removed (commit 58af9a70cc and 20f45029cc, respectively).

This seemed to have caused some confusion with git-merge, though, and
the y re-appeared after the merge.

Remove them again for good, this time.

Fixes: http://autobuild.buildroot.net/results/0adfb031c243709b0bac71599ed419b64cc514a4
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
  - rewrite commit log to explain why the patches reappeared
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/erofs-utils: bump version to 1.1

- removed 0001-erofs-utils-fix-configure.ac.patch [1];
- removed 0002-erofs-utils-avoid-_LARGEFILE64_SOURCE-and-_GNU_SOURC.patch [2];
- removed 0003-erofs-utils-avoid-using-old-compatibility-type-uint.patch [3];
- removed 0004-erofs-utils-avoid-PAGE_SIZE-redefinition.patch [4];
- add host-pkgconf, util-linux dependencies for uuid support.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/patch/?id=eefd95b37e1042992cb07bec1ac3f6dbe199d8f0
[2] https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/patch/?id=d4a161552becafeb1ebb98ec7e28675cb25fc548
[3] https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/patch/?id=989947348dddf03a8292b5e32bca538f0a325cd9
[4] https://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git/patch/?id=bdbabe54112d04c05819ebebf4e6f88ae863d436

Signed-off-by: Gao Xiang <hsiangkao@aol.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/systemd: bump version to 245.6

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: two sapces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libv4l: bump version to 1.20.0

- removed 0002-keytable-use-input_event-properly.patch
  (upstream [1])

- removed 0003-keytable-add-compatibility-for-input_event_sec.patch
  (upstream [2])

[1] https://git.linuxtv.org/v4l-utils.git/patch/?id=38f4ce74275ae4625463f7eec78764715a0b6246
[2] https://git.linuxtv.org/v4l-utils.git/patch/?id=8b7e6ce9367fe09ca9398b5f3cc75bba2598b162

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iptables: bump version to 1.8.4

For changelog details see [1].

[1] https://netfilter.org/projects/iptables/files/changes-iptables-1.8.4.txt

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/hwdata: bump version to 0.335

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fetchmail: bump version to 6.4.6

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/liburiparser: bump to version 0.9.4

- Drop patch (already in version)
- Update hash of COPYING (BSD-3 license fixed with
  https://github.com/uriparser/uriparser/commit/a3e81383591de85c65918a42e68fbe736832f7c1)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/c-periphery: bump version to 2.2.1

Since commit "cmake: add cmake build support"
(https://github.com/vsergeev/c-periphery/commit/952e1e906a5d65b78932128af24b7dbb8cce2e9dvsergeev/c-periphery@d0a973c),
c-periphery implement cmake build, so use cmake-package instead of
generic-package. Due to this, it now builds a shared library, so we
drop the INSTALL_TARGET = NO.

The hash of the license file is updated due to an update in the
copyright year:

  - Copyright (c) 2014-2019 vsergeev / Ivan (Vanya) A. Sergeev
  + Copyright (c) 2014-2020 vsergeev / Ivan (Vanya) A. Sergeev

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-periphery: bump to version 2.1.0

See changelog https://github.com/vsergeev/python-periphery/blob/master/CHANGELOG.md

Update the license hash for a change in copyright years:
-Copyright (c) 2015-2019 vsergeev / Ivan (Vanya) A. Sergeev
+Copyright (c) 2015-2020 vsergeev / Ivan (Vanya) A. Sergeev

Also switch to the new 2 spaces convention for the hash file

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_zero: bump kernel and uboot versions

Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration

Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/checksec: bump to 2.2.2

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/protobuf: bump to 3.12.2

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Merge branch 'next'

A few conflicts had to be resolved:

 - Version number and hash for mesa3d-headers/mesa3d
 - Patches added in qemu, and the qemu version number
 - The gnuconfig README.buildroot

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Kickoff 2020.08 cycle

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website/news.html: add 2020.05 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.05

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.{4, 6}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wampcc fix build with musl 1.2.0

Fixes:
 - http://autobuild.buildroot.org/results/da996e189220499b85efbdb541a891ac18db38c6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: cleanup rockwellcollins.com maintainers

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glib-networking: security bump to version 2.62.4

- Fix CVE-2020-13645: In GNOME glib-networking through 2.64.2, the
  implementation of GTlsClientConnection skips hostname verification of
  the server's TLS certificate if the application fails to specify the
  expected server identity. This is in contrast to its intended
  documented behavior, to fail the certificate verification.
  Applications that fail to provide the server identity, including Balsa
  before 2.5.11 and 2.6.x before 2.6.1, accept a TLS certificate if the
  certificate is valid for any host.
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: bump to 2.62.4 rather than 2.64.3]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libusb-compat: set LIBUSB_1_0_SONAME

LIBUSB_1_0_SONAME is detected since version 0.1.6 and
https://github.com/libusb/libusb-compat-0.1/commit/b6f5a2fe12ca19d658d7180e106254b31cf1f8f5

The detection mechanism is based on sed, here are the more relevant
parts:

 shrext_regexp=`echo "$shrext_cmds" | sed 's/\./\\\\./'`
[...]
 [AS_VAR_SET([ac_Lib_SONAME], [`ldd conftest$ac_exeext | grep 'lib[$2]'$shrext_regexp | sed 's/^@<:@ \t@:>@*lib[$2]'$shrext_regexp'/lib[$2]'$shrext_regexp'/;s/@<:@ \t@:>@.*$//'`])])

However, this mechanism is broken with sed 4.7 and will return the
following 'silent' error:

checking for SONAME of libusb-1.0... sed: -e expression #1, char 40: Invalid back reference
unknown

Moreover, it also raises the following build failure on one of the
autobuilder because an empty line is added to LIBUSB_1_0_SONAME:

checking for SONAME of libusb-1.0... checking
libusb-1.0.so.0
checking for GNU extensions of errno.h... no
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libusb.pc
config.status: creating libusb-config
config.status: creating Makefile
config.status: creating libusb/Makefile
config.status: creating examples/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
[7m>>> libusb-compat 0.1.7 Building[27m
PATH="/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/bin:/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/sbin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1
 /usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin"  /usr/bin/make -j8  -C /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7/
make[1]: Entering directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7'
Makefile:284: *** missing separator.  Stop.

We could patch patch m4/au_check_lib_soname.m4 to fix the mechanism
however this is difficult without reproducing the autobuilder failure
and upstream seems dead so just set LIBUSB_1_0_SONAME

Fixes:
 - http://autobuild.buildroot.org/results/12d771d85d30594929cfe3e1c783fc70857e7f5f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extract the actual SONAME from the library]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qemu: bump to 5.0.0

Remove upstream patches [1][2].

Switch to libcap-ng for virtio support [3].

Remove bluez option [4].

Disable container build [5] since we don't want to use containers for cross-building.

Disable io_uring [6] since there is no such package in Buildroot (yet).

The ARM Cortex-m7 cpu is now supported [7] a defconfig can be added in follup patch.

[1] https://git.qemu.org/?p=qemu.git;a=commit;h=00b5032eaddb7193f03f0a28b10286244d2e2a7b
[2] https://git.qemu.org/?p=qemu.git;a=commit;h=21bf9b06cb6d07c6cc437dfd47b47b28c2bb79db
[3] https://git.qemu.org/?p=qemu.git;a=commit;h=7e46261368d129c5ee8be927f5bcadc7ecd800d7
[4] https://git.qemu.org/?p=qemu.git;a=commit;h=1d4ffe8dc77cbc9aafe8bcf514ca0e43f85aaae3
[5] https://git.qemu.org/?p=qemu.git;a=commit;h=afc3a8f9f1df09c091f9903eaef82b35c152cacf
[6] https://git.qemu.org/?p=qemu.git;a=commit;h=c10dd8565defdb14695580c9369b20f4544e65a2
[7] https://git.qemu.org/?p=qemu.git;a=commit;h=cf7beda5072e106ddce875c1996446540c5fe239

See:
https://wiki.qemu.org/ChangeLog/5.0
https://www.qemu.org/2020/04/29/qemu-5-0-0/

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: remove csky fork

We have a qemu fork for csky cpus [1] but since qemu version
bump to 4.2.0 [2] and libssh2/libssh change the csky build is
broken.

The csky fork is based on Qemu 3.0.0 but unlike autotools packages
any unknown option is handled as error.

Since we don't want to support all options from previous qemu
release and the github repository has been removed [3] and the
only remaining archive is located on http://sources.buildroot.net,
remove the qemu csky fork as suggested by [4].

[1] https://git.buildroot.net/buildroot/commit/?id=f816e5b276f1ef15840bec6667f1e8219717ab7d
[2] https://git.buildroot.net/buildroot/commit/?id=0ea17054ce7dfc54efca5634133cef786445e7b1
[3] https://github.com/c-sky/qemu
[4] http://lists.busybox.net/pipermail/buildroot/2020-May/281885.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Peter: move patches out of 4.2.0 subdir]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcap-ng: add host variant

Qemu 5.0.0 recently switched to libcap-ng [1].
Add the host variant for host-qemu package.

[1] https://git.qemu.org/?p=qemu.git;a=commit;h=7e46261368d129c5ee8be927f5bcadc7ecd800d7

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>