i965/fs: Use fs_reg for CS/VS atomics pixel mask immediate data

The brw_imm_ud will yield a HW_REG which then will introduce a barrier
for certain optimization opportunities.

No piglit regressions seen with gen8 (simd8vs).

Suggested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: Set pixel/sample mask for compute shaders atomic ops

For fragment programs, we pull this mask from the payload header. The same
mask doesn't exist for compute shaders, so we set all bits to enabled.

Previously we were setting 0xff to support SIMD8 VS, but with CS we
support SIMD16, and therefore we change this to 0xffff.

Related commits for SIMD8 VS:

commit d9cd982d556be560af3bcbcdaf62b6b93eb934a5
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Sun Feb 15 20:06:59 2015 -0800
    i965/simd8vs: Fix SIMD8 atomics

commit 4a95be9772a255776309f23180519a4a8560f2dd
Author: Jordan Justen <jordan.l.justen@intel.com>
Date:   Tue Feb 17 09:57:35 2015 -0800
    i965/simd8vs: Fix SIMD8 atomics (read-only)

Note: this mask is ANDed with the execution mask, so some channels may not end
up issuing the atomic operation.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

ilo: R32G32B32_FLOAT need no special care on Gen8+

Gen8+ must use VALIGN_4.  Unlike prior Gens, R32G32B32_FLOAT should supposedly
support VALIGN_4.

ilo: 128 BPP formats can use TiledY on Gen7.5+

The restriction is lifted.

nvc0: enable double support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: remove merge/split pairs to allow normal propagation to occur

Because the TGSI interface creates merges for each instruction source
and then splits them back out, there are a lot of unnecessary
merge/split pairs which do essentially nothing. The various modifier/etc
propagation doesn't know how to walk though those, so just remove them
when they're unnecessary.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add support for new TGSI double opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: handle zero and negative sqrt arguments

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: no instruction can load a double immediate

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: fix lowering of RSQ/RCP/SQRT/MOD to work with F64

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gm107/ir: fix F2F flipped stype/dtype flags

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gm107/ir: fix DSET boolean float flag

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gm107/ir: fix DMUL opcode encoding

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gk110/ir: add emission of dadd/dmul/dmad opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add emission of dadd/dmul/dmad opcodes, fix minmax

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: don't enable NV_fragment_program_option with swrast

Since dropping some NV_fragment_program opcodes (commits
868f95f1da74cf6dd7468cba1b56664aad585ccb, a3688d686f147f4252d19b298ae26d4ac72c2e08)
we can no longer parse all opcodes necessary for this extension, leading
to bugs (https://bugs.freedesktop.org/show_bug.cgi?id=86980).
Hence don't announce support for it in swrast (no other driver enabled it).
(Note that remnants of some NV_fp/vp extensions remain, they could be
dropped but are required as hacks for getting viewperf11 catia to run.)

drivers/x11: add gallium include dirs to Makefile.am

Fixes xlib driver build after e8c5cbfd921680c.

Acked-by: Matt Turner <mattst88@gmail.com>

vbo: fix an unitialized-variable warning

It looks like a bug to me.

Cc: 10.5 10.4 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/sw/kms: fix a type-mismatch warning

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/sw/kms: don't redefine DEBUG

Reviewed-by: Brian Paul <brianp@vmware.com>

targets/d3dadapter9: remove an unused variable

Reviewed-by: Brian Paul <brianp@vmware.com>

tgsi: fix type-mismatch warning

Reviewed-by: Brian Paul <brianp@vmware.com>

gallivm: fix uninitialized-variable warnings

Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Have configure define NDEBUG, not mtypes.h.

mtypes.h had been defining NDEBUG (used by assert) if DEBUG was not
defined. Confusing and bizarre that you don't get NDEBUG if you don't
include mtypes.h.

... which is just what happened in commit bef38f62e.

Let's let configure define this for us if not using --enable-debug.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Fix the Mesa build without -DDEBUG.

With -DDEBUG -UNDEBUG, this assert uses reg_state::stack_size, which
doesn't exist, breaking the build:

assert(state->states[index].index < state->states[index].stack_size);

Switch it to ifndef NDEBUG, so the field will exist if the assertion
actually generates code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nir: Drop dependency on mtypes.h for core NIR.

One less new directory necessary for gallium code that wants to interact
with NIR.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

glsl: Only include mtypes from glsl_types.h for the C++ code that needs it.

It's used in one of the methods, not in the structure definitions.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

util: Move Mesa's bitset.h to util/.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: Make bitset.h not rely on Mesa-specific types and functions.

Note that we can't use u_math.h's align() because it's a function instead
of a macro, while BITSET_DECLARE needs a constant expression for nouveau's
usage in global declarations.

v2: Stick some parens around the bits macro argument usage (review by Jose).

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: Use u_math.h from macros.h

This avoids duplication of some macros and other definitions across the
tree.

Note that COPY_4FV switches from a memcpy-based implementation to an
assignment of 4 floats.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

gallium/util: Don't include unused debug functions from u_math.h

It introduces references to gallium util/ symbols which means we don't get
to include it from outside-of-gallium code.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: Add gallium include dirs to more parts of the tree.

v2: Try to patch up the scons bits.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

gallium/radeon: fix an uninitialized-variable warning

gallium: add new double-related shader caps to all the getters

Missed a few drivers in the earlier changes, this should fix up all the
ones that print unknown caps or don't have a default statement.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

svga: add missing _DROUND,DFRACEXP_DLDEXP_SUPPORTED switch cases

To silence unhandled switch case warnings.

radeonsi: don't use SQC_CACHES to flush ICACHE and KCACHE on SI

This reverts 73c2b0d18c51459697d8ec194ecfc4438c98c139.

It doesn't seem to be reliable. It's probably missing a wait packet or
something, because it's just a register write and doesn't wait for anything.
SURFACE_SYNC at least seems to wait until the flush is done. Just guessing.

Let's not complicate things and revert this.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88561

Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

i965/gen6: Fix GL_GEOMETRY_SHADER_PRIMITIVES_EMITTED_ARB

In gen6 we need to compute the primitive count in the generated GS program.
The current implementation only counts full primitives, that is, if the
output primitive type is a triangle strip, it won't count individual
triangles in the strip, only complete strips.

If we want to count basic primitives instead we have two options: rework
the assembly code we generate for strip primitives or simply use
CL_INVOCATION_COUNT to resolve the query and let the hardware do that work
for us. This patch implements the latter approach.

Fixes the following piglit test:
bin/arb_pipeline_statistics_query-geom -auto

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89210
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

mesa: Check that draw buffers are valid for glDrawBuffers on GLES3

Section 4.2 (Whole Framebuffer Operations) of the OpenGL 3.0 specification
says:

    "Each buffer listed in bufs must be BACK, NONE, or one of the values from
     table 4.3 (NONE, COLOR_ATTACHMENTi)".

Fixes 1 dEQP test:
* dEQP-GLES3.functional.negative_api.buffer.draw_buffers

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: don't allow invariant qualifiers for interface blocks

GLSL 1.50 and GLSL 4.40 specs, they both say the same in
"Interface Blocks" section:

"If optional qualifiers are used, they can include interpolation qualifiers,
auxiliary storage qualifiers, and storage qualifiers and they must declare
an input, output, or uniform member consistent with the interface qualifier
of the block"

From GLSL ES 3.0, chapter 4.3.7 "Interface Blocks", page 38:

"GLSL ES 3.0 does not support interface blocks for shader inputs or outputs."

and from GLSL ES 3.0, chapter 4.6.1 "The invariant qualifier", page 52.

"Only variables output from a shader can be candidates for invariance."

This patch fixes the following dEQP tests:

dEQP-GLES3.functional.shaders.declarations.invalid_declarations.invariant_uniform_block_2_vertex
dEQP-GLES3.functional.shaders.declarations.invalid_declarations.invariant_uniform_block_2_fragment

No piglit regressions.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
v2:

- Enable this check for GLSL.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

vc4: Keep an array of pointers to instructions defining the temps around.

The optimization passes are always regenerating it and throwing it away,
but it's not hard to keep track of.

vc4: Move qir_uniform() and the constant-value versions to vc4_qir.c/h.

I may want them in optimization passes, and they're not really particular
to the program translation stage.

vc4: Enforce one-uniform-per-instruction after optimization.

This lets us more intelligently decide which uniform values should be put
into temporaries, by choosing the most reused values to push to temps
first.

total uniforms in shared programs: 13457 -> 13433 (-0.18%)
uniforms in affected programs:     1524 -> 1500 (-1.57%)
total instructions in shared programs: 40198 -> 40019 (-0.45%)
instructions in affected programs:     6027 -> 5848 (-2.97%)

I noticed this opportunity because with the NIR work, some programs were
happening to make different uniform copy propagation choices that
significantly increased instruction counts.

vc4: Rename add_uniform() to qir_uniform().

vc4: Shut up runtime warnings about new pipe caps.

i965/vec4: Add and use byte-MOV instruction for unpack 4x8.

Previously we were using a B/UB source in an Align16 instruction, which
is illegal. It for some reason works on all platforms, except Broadwell.

Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86811
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/blorp: Emit MADs.

Low hanging fruit: cuts a couple of instructions.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/blorp: Optimize clamping tex coords.

Each emit_cond_mov() emits a CMP of its first to arguments using the
specified conditional mod, followed by a predicated MOV of the fifth
argument into the fourth. In all four cases here, it was just
implementing MIN/MAX which we can do in a single SEL instruction.

Also reorder the instructions for a slightly better schedule.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Use greater-equal cmod to implement maximum.

The docs specifically call out SEL with .l and .ge as the
implementations of MIN and MAX respectively. Among other things, SEL
with these conditional mods are commutative.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Don't emit saturates for instructions without destinations.

We were special casing OPCODE_END but no other instructions that have no
destination, like OPCODE_KIL, leading us to emitting MOVs with null
destinations.

total instructions in shared programs: 5705243 -> 5701539 (-0.06%)
instructions in affected programs:     124104 -> 120400 (-2.98%)
helped:                                904

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Consider MOV.SAT to interfere if it has a source modifier.

The saturate propagation pass recognizes that the second instruction
below does not interfere with an attempt to propagate the saturate
modifier from instruction 3 to 1.

 1:  add(8)     dst0   src0  src1
 2:  mov.sat(8) dst1   dst0
 3:  mov.sat(8) dst2   dst0

Unfortunately, we did not consider the case of instruction 2 having a
source modifier on dst0. Take for instance:

 1:  add(8)     dst0   src0  src1
 2:  mov.sat(8) dst1  -dst0
 3:  mov.sat(8) dst2   dst0

Consider such an instruction to interfere. Increase instruction counts
in Anomaly 2, which could be a bug fix depending on the values the first
instruction produces.

instructions in affected programs:     53228 -> 53934 (1.33%)
HURT:                                  360

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Use fs_inst::overwrites_reg() in saturate propagation.

This is safer and matches the conditional_mod propagation pass.

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/fs: Add unit tests for saturate propagation pass.

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Use the without_array predicate

Reviewed-by: Matt Turner <mattst88@gmail.com>

nv50: add PIPELINE_STATISTICS query support, based on nvc0

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Nick Tenney <nick.tenney@gmail.com>

svga: add missing :

Fixes: 924ee3f408 ("gallium: add shader cap for dldexp/dfracexp support")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir/GCM: Pull unpinned instructions out of blocks while pinning

This lets us be slightly more efficient by not walking the CFG extra times.
Also, it may make it easier to ensure that GVN happens on only unpinned
instructions.

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/GCM: Use pass_flags instead of bitsets for tracking visited/pinned

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Add a global code motion (GCM) pass

v2 Jason Ekstrand <jason.ekstrand@intel.com>:
 - Use nir_dominance_lca for computing least common anscestors
 - Use the block index for comparing dominance tree depths
 - Pin things that do partial derivatives

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/instr: Change "live" to a more generic "pass_flags" field

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Make nir_[cf_node/instr]_[prev/next] return null if at the end

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/from_ssa: Don't try to read an invalid instruction

Right now, the nir_instr_prev function function blindly looks up the
previous element in the exec list and casts it to an instruction even if
it's the tail sentinel.  The next commit will change this to return null if
it's the first instruction.  Making this change first avoids getting a
segfault between commits.  The only reason we never noticed is that, thanks
to the way things are laid out in nir_block, the casted instruction's type
was never parallal_copy.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/validate: Validate SSA defs the same way we do for registers

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/validate: Validate if_uses on registers

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Properly clean up CF nodes when we remove them

Previously, if you remved a CF node that still had instructions in it, none
of the use/def information from those instructions would get cleaned up.
Also, we weren't removing if statements from the if_uses of the
corresponding register or SSA def.  This commit fixes both of these
problems

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: use nir_foreach_ssa_def for indexing ssa defs

This is both simpler and more correct.  The old code didn't properly index
load_const instructions.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/from_ssa: Use the nir_block_dominance function instead of our own

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/dominance: Add a constant-time mechanism for comparing blocks

This is mostly thanks to Connor.  The idea is to do a depth-first search
that computes pre and post indices for all the blocks.  We can then figure
out if one block dominates another in constant time by two simple
comparison operations.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/dominance: Expose the dominance intersection function

Being able to find the least common anscestor in the dominance tree is a
useful thing that we may want to do in other passes.  In particular, we
need it for GCM.

v2: Handle NULL inputs by returning the other block

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

st/mesa: lower DFRACEXP/DLDEXP when they are not supported

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

st/mesa: disable lowering of dops to dfrac when dround is available

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

st/mesa: add support for new double opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add shader cap for dldexp/dfracexp support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add a cap to enable double rounding opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add some more double opcodes to avoid unnecessary lowering

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

docs/GL3.txt: softpipe now supports GL_ARB_gpu_shader_fp64

Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: add st fp64 support (v7.1)

This adds support to the state tracker for
ARB_gpu_shader_fp64.

The details are explained in comments
within the code.

v2 : add double to int/unsigned conversion
v3: handle fp64 consts better
v4: use DRSQ
v4.1: add d2b
v4.2: drop DDIV

v5: split out some prep patches.
v5.1: add some comments.
v5.2: more comments

v6: simplify down the double instruction
    generation loop.

v7: Merge Ilia's two cleanup patches.
v7.1: minor fixups for Ilia patch + cleanups

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/st_tgsi_to_glsl: prepare add_constant for fp64

This just moves stuff around a little to make the next patch
cleaner.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/glsl_to_tgsi: convert dst to an array

This is just prep work for fp64 support where we need
an array of 2 dst values.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965: just avoid warnings with fp64

This just fills in some blanks to avoid warnings in the i965 driver.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: Add compute to _mesa_shader_stage_to_string(); use unreachable.

This is basically Ian's review feedback for my patch that added
_mesa_shader_stage_to_abbrev() - it just makes both consistent again.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/vec4: Print "VS" or "GS" when compiles fail, not "vec4".

This is now trivial to do right.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/vec4: Replace debug_flag with debug_enabled.

backend_visitor now handles this, so we can delete the vec4_visitor
specific code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Make scheduler cycle estimates use the proper stage name.

Previously, the vec4 backend labeled shaders as "vec4" - now it uses the
specific names "VS" and "GS".

The FS backend now correctly prints "VS" for vertex shaders (rather than
"fs").  It also prints "FS" instead of "fs" for fragment shaders;
preserving that behavior didn't seem essential.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Un-hardcode DEBUG_WM, "FS", and "fragment".

These code paths can (or will) be used for other shader stages.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Create backend_visitor fields for debugging messages.

We introduce three new fields in backend_visitor:
- debug_enabled: whether or not INTEL_DEBUG & DEBUG_<stage flag>
- stage_name: "vertex", "fragment", etc. for use in messages
- stage_abbrev: "VS", "FS", etc. for use in messages

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Add a function to translate MESA_SHADER_* into DEBUG_* enums.

When compiling, we have a gl_shader_stage (MESA_SHADER_*) enum, and want
to know whether debugging is enabled for that stage.  This allows us to
easily translate it into the corresponding debug flag.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: Create a _mesa_shader_stage_to_abbrev() function.

This is similar to _mesa_shader_stage_to_string(), but returns "VS"
instead of "vertex".

v2: Use unreachable() and add MESA_SHADER_COMPUTE (requested by Ian).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Use VARYING_SLOT checks rather than strcmp().

Comparing the location field is equivalent and more efficient.

We'll also need this when we start using NIR for ARB programs, as our
NIR converter will set the location field correctly, but probably won't
use the GLSL names for these concepts.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Remove type parameter from emit_vs_system_value().

Every VS system value has type D.  We can always add this back if that
changes, but for now, it's extra typing.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: add lowering for double divide to rcp/mul

It looks like no hw does div anyways, so we should just
lower at the GLSL level.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

softpipe/tgsi: expose doubles for softpipe.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

tgsi: add support for flt64 constants

These act like flt32 except they take up two slots, and you
can only add 2 x flt64 constants in one slot.

The main reason they are different is we don't want to match half a flt64
constants against a flt32 constant in the matching code, we need to make
sure we treat both parts of the flt64 as an single structure.

Cleaned up printing/parsing by Ilia Mirkin <imirkin@alum.mit.edu>

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium: add double opcodes and TGSI execution (v4.2)

This patch adds support for a set of double opcodes
to TGSI. It is an update of work done originally
by Michal Krol on the gallium-double-opcodes branch.

The opcodes have a hint where they came from in the
header file.

v2: add unsigned/int <-> double
v2.1:  update docs.

v3: add DRSQ (Glenn), fix review comments (Glenn).

v4: drop DDIV
v4.1: cleanups, fix some docs bugs, (Ilia)
      rework store_dest and fetch_source fns. (Ilia)
4.2: fixup float comparisons (Ilia)

This is based on code by Michael Krol <michal@vmware.com>

Roland and Glenn also reviewed earlier versions.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/util: indentation fix

st/mesa: add GSL_TYPE_DOUBLE, new ir_unop_* switch cases

To silence compiler warnings about unhandled switch cases.
v2: move GSL_TYPE_DOUBLE case to the "Invalid type in type_size" section,
per Ilia.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir: add missing GLSL_TYPE_DOUBLE case in type_size()

To silence compiler warning about unhandled switch case.
v2: move GLSL_TYPE_DOUBLE to the "not reached" section, per Ilia.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: fix sampler view reference counting bug in glDraw/CopyPixels

Use pipe_sampler_view_reference() instead of ordinary assignment.
Also add a new sanity check assertion.

Fixes piglit gl-1.0-drawpixels-color-index test crash.  But note
that the test still fails.

Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

swrast: fix multiple color buffer writing

If a fragment program wrote to more than one color buffer, the
first fragment color got replicated to all dest buffers.  This
fixes 5 piglit FBO tests, including fbo-drawbuffers-arbfp.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45348
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: remove unused _math_trans_4chan()

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

install-lib-links: don't depend on .libs directory

This snippet can be included in Makefiles that may, depending on the
project configuration, not actually build any installable libraries.

In that case we don't have anything to depend on and this part of
the makefile may be executed before the .libs directory is created,
so do not depend on it being there.

Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>