package/ffmpeg: bump version to 3.3.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: bump version to 7.1.11

Changelog: http://www.php.net/ChangeLog-7.php#7.1.11
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/samba4: bump version to 4.6.9

Release notes: https://www.samba.org/samba/history/samba-4.6.9.html

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tzdata: bump version to 2017c

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zic: bump version to 2017c

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5wayland: fix config option indentation

Reorganize so the optional composer option for the qt5wayland package shows up
as an indented option.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wget: add optional zlib support

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wget: security bump to version 1.19.2

Fixes the following security issues:

CVE-2017-13089: The http.c:skip_short_body() function is called in some
circumstances, such as when processing redirects.  When the response is sent
chunked, the chunk parser uses strtol() to read each chunk's length, but
doesn't check that the chunk length is a non-negative number.  The code then
tries to skip the chunk in pieces of 512 bytes by using the MIN() macro, but
ends up passing the negative chunk length to connect.c:fd_read().  As
fd_read() takes an int argument, the high 32 bits of the chunk length are
discarded, leaving fd_read() with a completely attacker controlled length
argument.

CVE-2017-13090: The retr.c:fd_read_body() function is called when processing
OK responses.  When the response is sent chunked, the chunk parser uses
strtol() to read each chunk's length, but doesn't check that the chunk
length is a non-negative number.  The code then tries to read the chunk in
pieces of 8192 bytes by using the MIN() macro, but ends up passing the
negative chunk length to retr.c:fd_read().  As fd_read() takes an int
argument, the high 32 bits of the chunk length are discarded, leaving
fd_read() with a completely attacker controlled length argument.  The
attacker can corrupt malloc metadata after the allocated buffer.

Drop now upstreamed patch and change to .tar.lz as .tar.xz is no longer
available.

Also add a hash for the license file while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tor: bump version to 0.3.1.8

Release notes:
https://blog.torproject.org/new-stable-tor-releases-0318-03012-02913-02816-02515

Added license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.13.10

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 13}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

webkitgtk: security bump to version 2.18.2

This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes; mostly for crashes and rendering issues, plus
one important fix for the layout or Arabic text.

Release notes:

    https://webkitgtk.org/2017/10/27/webkitgtk2.18.2-released.html

Even though an acconpanying security advisory has not been published
for this release, the release contains fixes for several crashes (one
of them for the decoder of the very common GIF image format), which
arguably can be considered potential security issues.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2017.09.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: fix license typos

Signed-off-by: Jerzy Grzegorek <jerzy.m.grzegorek@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-paho-mqtt: bump version to 1.3.1

Remove upstreamed patch and add licence checksums.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-zope-interface: bump version to 4.4.3

Add licence checksum.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: security bump to version 7.6p1

Fixes CVE-2017-15906 - The process_open function in sftp-server.c in OpenSSH
before 7.6 does not properly prevent write operations in readonly mode,
which allows attackers to create zero-length files.

For more details, see the release notes:
https://www.openssh.com/txt/release-7.6

Also add a hash for the license file while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

redis: bump to version 3.2.11

3.2.11 fixes important issues. From the release notes:

================================================================================
Redis 3.2.11     Released Thu Sep 21 15:47:53 CEST 2017
================================================================================

Upgrade urgency HIGH: Potentially critical bugs fixed.

AOF flush on SHUTDOWN did not cared to really write the AOF buffers
(not in the kernel but in the Redis process memory) to disk before exiting.
Calling SHUTDOWN during traffic resulted into not every operation to be
persisted on disk.

Also add a hash for the license file while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl2: security bump to version 2.0.7

Fixes CVE-2017-2888 - An exploitable integer overflow vulnerability exists
when creating a new RGB Surface in SDL 2.0.5.  A specially crafted file can
cause an integer overflow resulting in too little memory being allocated
which can lead to a buffer overflow and potential code execution.  An
attacker can provide a specially crafted image file to trigger this
vulnerability.

Also add a hash for the license file while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sdl2: explicitly disable raspberry pi video backend

Fixes:
http://autobuild.buildroot.net/results/d59/d5992dcc9a49ee77afaebdcc9448ac1868fa7de1/
http://autobuild.buildroot.net/results/e89/e894f21ce1983ee3bd8d65a8e59e1adab9a62707/

The configure script automatically enables support for the raspberry pi
video backend if it detects the rpi-userland package.  Unfortunately it
hardcodes a number of include/linker paths unsuitable for cross compilation,
breaking the build:

    if test x$enable_video = xyes -a x$enable_video_rpi = xyes; then
..
     RPI_CFLAGS="-I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux"
     RPI_LDFLAGS="-L/opt/vc/lib -lbcm_host"
    fi

So explicitly disable it until the configure script is fixed.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nodejs: bump version to 8.8.1

Fixes a regression introduced in 8.8.0.
See https://nodejs.org/en/blog/release/v8.8.1/

Peter: apply on top of 8.8.0, mention that it fixes regression]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nodejs: security bump to version 8.8.0

Fixes CVE-2017-14919 - In zlib v1.2.9, a change was made that causes an
error to be raised when a raw deflate stream is initialized with windowBits
set to 8.  On some versions this crashes Node and you cannot recover from
it, while on some versions it throws an exception.  Node.js will now
gracefully set windowBits to 9 replicating the legacy behavior to avoid a
DOS vector.

For more details, see the announcement:
https://nodejs.org/en/blog/vulnerability/oct-2017-dos/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard &lt;<a href="mailto:peter@korsgaard.com">peter@korsgaard.com</a>&gt;<br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

s6-rc: bump version to 0.3.0.0

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

s6: bump version to 2.6.1.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

execline: bump version to 2.3.0.3

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

skalibs: bump version to 2.6.0.1

Bump version to 2.6.0.1 and refresh patches.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

janus-gateway: bump to v0.2.5

Also add hash for license file.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: security bump to version 7.56.1

Fixes CVE-2017-1000257 - IMAP FETCH response out of bounds read

https://curl.haxx.se/docs/adv_20171023.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

irssi: security bump to version 1.0.5

Fixes the following security issues:

(a) When installing themes with unterminated colour formatting
    sequences, Irssi may access data beyond the end of the
    string. (CWE-126) Found by Hanno Böck.

    CVE-2017-15228 was assigned to this issue.

(b) While waiting for the channel synchronisation, Irssi may
    incorrectly fail to remove destroyed channels from the query list,
    resulting in use after free conditions when updating the state
    later on. Found by Joseph Bisch. (CWE-416 caused by CWE-672)

    CVE-2017-15227 was assigned to this issue.

(c) Certain incorrectly formatted DCC CTCP messages could cause NULL
    pointer dereference. Found by Joseph Bisch. This is a separate,
    but similar issue to CVE-2017-9468. (CWE-690)

    CVE-2017-15721 was assigned to this issue.

(d) Overlong nicks or targets may result in a NULL pointer dereference
    while splitting the message. Found by Joseph Bisch. (CWE-690)

    CVE-2017-15723 was assigned to this issue.

(e) In certain cases Irssi may fail to verify that a Safe channel ID
    is long enough, causing reads beyond the end of the string. Found
    by Joseph Bisch. (CWE-126)

    CVE-2017-15722 was assigned to this issue.

For more details, see the advisory:
https://irssi.org/security/irssi_sa_2017_10.txt

While we're at it, also add a hash for the license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi: bump version to 17.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libpciaccess: bump version to 0.14

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/apache: bump version to 2.4.29

Changelog: http://www.apache.org/dist/httpd/CHANGES_2.4.29

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2017.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2017.08.1

[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 20b6624f4bb84353e690d897688fd7ac12d6a881)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boost: add fiber module

This module requires NPTL. Without support for the module, it is built
unconditionally, which was causing the following build errors:
http://autobuild.buildroot.net/results/029/0298038fc126d15733d81c54e0bb7cb00be48b92/build-end.log
http://autobuild.buildroot.net/results/6f3/6f3a218c47204e431100799482a3ed0ec159fa15/build-end.log
http://autobuild.buildroot.net/results/63e/63e5569a90d3ace97cb6102509cbd04aeab6f5f7/build-end.log

Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Arnout: add empty line in Config.in, reword commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux-tools/perf: fix build for MIPS by using the right emulation on LD

Passing just the endianness flag to LD is not enough. We need to pass
the right emulation flag which will set everything for us, not only the
endianness.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

mpd: bump to version 0.20.11

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.13.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 13}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x264: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bluez5_utils: define FIRMWARE_DIR for hciattach_bcm43xx

The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: update after netsnmp changes

Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: add security patches

CVE-2017-13685: The dump_callback function in SQLite 3.20.0 allows
remote attackers to cause a denial of service (EXC_BAD_ACCESS and
application crash) via a crafted file.

CVE-2017-15286: SQLite 3.20.1 has a NULL pointer dereference in
tableColumnList in shell.c
because it fails to consider certain cases where
`sqlite3_step(pStmt)==SQLITE_ROW` is false and a data structure is never
initialized.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: fix build on ppc64le host

Fixes:
http://autobuild.buildroot.net/results/57d/57d9f0ea27e5c8ba73002bd1d0b33027f27a3779/
http://autobuild.buildroot.net/results/7c3/7c3133e822c997879fe00923ba0ad7903656c2e1/

bootstrap by default runs ./tools/build/src/engine/build.sh --guess-toolset
to detect what toolchain (compiler variant).  On x86 this returns gcc, but
on the ppc64le gcc112 autobuilder this returns xlcpp causing bootstrap.sh to
get confused and bail out:

./bootstrap.sh ..
Building Boost.Build engine with toolset ... tools/build/src/engine/###
\### No toolset specified. Please use --toolset option.
\###
\### Known toolsets are: acc, borland, cc, como, clang, darwin, gcc, gcc-nocygwin, intel-darwin, intel-linux, intel-win32, kcc, kylix, metrowerks, mipspro, msvc, qcc, pathscale, pgi, sun, sunpro, tru64cxx, vacpp, xlcpp, vc7, vc8, vc9, vc10, vc11, vc12, vc14, vc141, vmsdecc
\###/b2

Fix it by explicitly specifying the gcc toolset mode to bootstrap, similar
to how it was already done for the bjam invocations.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add maintainer for pc_x86_64_* defconfigs

I've been using this packages to test changes in the grub package, so
I can maintain them.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/pc: add documentation for testing with qemu

Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/pc: refactor to use genimage and grub.cfg

This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/wrapper: fake __DATE_ and __TIME__ for older gcc

Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).

However, older gcc versions do not offer this feature.

So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
    https://reproducible-builds.org/specs/source-date-epoch/
    https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html

Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.

gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libffi: add patch to fix MIPS support

Building Python 3.x on MIPS with musl fails because the libffi code
uses a "#ifdef linux" test to decide if we're building on Linux or
not. When building with -std=c99, "linux" is not defined, so instead
of including <asm/sgidefs.h>, libffi's code tries to include
<sgidefs.h>, which doesn't exist on musl.

The right fix is to use __linux__, which is POSIX compliant, and
therefore defined even when -std=c99 is used.

Note that glibc and uClibc were not affected because they do provide a
<sgidefs.h> header in addition to the <asm/sgidefs.h> one.

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: reformat patch with Git, add a better commit log and description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add DEPENDENCIES_HOST_PREREQ to the list of packages

That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info

Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

dependencies: always use HOSTCC_NOCACHE for DEPENDENCIES_HOST_PREREQ

Currently, HOSTCC and HOSTCXX are set to their _NOCACHE variants in the
'dependencies' target. This is needed because at that time, ccache is
not built yet - host-ccache is one of the dependencies. However, because
this override is only specified for the 'dependencies' target (and
thereby gets inherited by its dependencies), the override is only
applied when the package is reached through the 'dependencies' target.
This is not the case when one of DEPENDENCIES_HOST_PREREQ is built
directly from the command line, e.g. when doing 'make host-ccache'. So
in that case, ccache will be built with ccache... which fails of
course.

To fix this, directly apply the override to the DEPENCIES_HOST_PREREQ
targets.

Note that this only fixes the issue for 'make host-ccache', NOT for
e.g. 'make host-ccache-configure'.

Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
[Arnout: improve commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

xen: add upstream post-4.9.0 security fix for XSA-245

Fixes XA-245: ARM: Some memory not scrubbed at boot

https://xenbits.xenproject.org/xsa/advisory-245.html

Notice: Not applying XSA-237..244 as they are x86 only and have patch file
name conflicts between 2017.02.x and master.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtomcrypt: fix build without wchar

GCC defines wchar_t even when wchar support is disabled in uClibc. The
LTC_NO_WCHAR macro triggers a local definition of wchar_t that conflicts
with the GCC defined one. Remove LTC_NO_WCHAR to avoid that.

See also https://github.com/libtom/libtomcrypt/issues/313 for more
discussion about this.

Fixes:
http://autobuild.buildroot.net/results/4ff/4ffb593185f7520d2d9a9cc988aa9c510f253930/

Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: unconditionally define BR2_PACKAGE_PROVIDES_HOST_OPENSSL

Fixes:
http://autobuild.buildroot.net/results/207/207d0ca1fe5328e675246c851fcb0d5685f8c0bd/
http://autobuild.buildroot.net/results/546/546a56d6dd39e5e9ecfe25fd36a00510e6c0c45b/

host-openssl may be used without openssl being enabled for the target, so
move BR2_PACKAGE_PROVIDES_HOST_OPENSSL outside the BR2_PACKAGE_OPENSSL
conditional.

While we're at it, add a comment explaining what this magic config symbol does.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lame: security bump to version 3.100

Fixes the following security issues:

CVE-2017-9410: fill_buffer_resample function in libmp3lame/util.c heap-based
buffer over-read and ap

CVE-2017-9411: fill_buffer_resample function in libmp3lame/util.c invalid
memory read and application crash

CVE-2017-9412: unpack_read_samples function in frontend/get_audio.c invalid
memory read and application crash

Drop patches now upstream or no longer needed:

0001-configure.patch: Upstream as mentioned in patch description

0002-gtk1-ac-directives.patch: Upstream as mentioned in patch
description/release notes:

Resurrect Owen Taylor's code dated from 97-11-3 to properly deal with GTK1.
This was transplanted back from aclocal.m4 with a patch provided by Andres
Mejia. This change makes it easy to regenerate autotools' files with a simple
invocation of autoconf -vfi.

0003-msse.patch: Not needed as -march <x86-variant-with-msse-support>
nowadays implies -msse.

With these removed, autoreconf is no longer needed.

Also add a hash for the license file while we're at it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-sdl2: refactor with cmake

that allows optional dependencies

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
 - use "luainterpreter" instead of "lua" in the dependencies
 - replace with a Git formatted patch that doesn't comment code but
   removes it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/pc: bump kernel version

Bump the kernel version to 4.13.8.
Tested with qemu 2.9.1 on bios and UEFI virtual machines.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: bump to 1.20.5

https://www.enlightenment.org/news/efl-1.20.5

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

runc: bump to v1.0.0-rc4

This is a dependency of docker-engine v2017.07.0-ce.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

go: bump version to 1.9

Go 1.9 is required for docker-engine and other Go packages in Buildroot.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openldap: correct openssl handling

Fixes:
http://autobuild.buildroot.net/results/ffc/ffc9c10c55c2838ab7002c5ec35244e9bfe46189/

Commit dfa1817d31a (openldap: supports only the real OpenSSL, not LibreSSL)
tried to ensure openldap would only use openssl, but changed the wrong
variable. OPENLDAP_TLS is passed to configure, so it shouldn't be changed:

./configure --target=aarch64-buildroot-linux-gnu .. --with-tls=libopenssl ..
Configuring OpenLDAP 2.4.45-Release ...
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-buildroot-linux-gnu
checking target system type... aarch64-buildroot-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for aarch64-buildroot-linux-gnu-strip... /usr/lfs/v0/rc-buildroot-test/scripts/instance-0/output/host/bin/aarch64-linux-gnu-strip
checking configure arguments... configure: error: bad value libopenssl for --with-tls

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: add upstream post-1.27.2 httpd fix

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libdrm: make Etnaviv arch-independent

Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d: make Etnaviv arch-independent

Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

musl: add upstream security fix for CVE-2017-15650

>From the upstream announcement:
http://www.openwall.com/lists/oss-security/2017/10/19/5

Felix Wilhelm has discovered a flaw in the dns response parsing for
musl libc 1.1.16 that leads to overflow of a stack-based buffer.
Earlier versions are also affected.

When an application makes a request via getaddrinfo for both IPv4 and
IPv6 results (AF_UNSPEC), an attacker who controls or can spoof the
nameservers configured in resolv.conf can reply to both the A and AAAA
queries with A results. Since A records are smaller than AAAA records,
it's possible to fit more addresses than the precomputed bound, and a
buffer overflow occurs.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board: Add Bananapi M1 support

Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot

Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: fix patch 0001-openjpeg-Support-building-with-openjpeg-2.3-simpler.patch

The previous version was by mistake mixed up with the patch 'gst-plugins-bad:
openjpeg: Remove compatibility with openjpeg 2.0'

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/config-fragments/autobuild: add ARC glibc fragment

glibc is now supported for ARC so let's kick-start autobuilders
with glibc toolchain for ARC HS.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/go: fix cross-compilation settings

This patch fixes a bug with the BR2_TOOLCHAIN_HAS_THREADS variable
handling which causes CGO_ENABLED to be always 0.

Furthermore, it fixes the cross compilation options for the go
compiler: setting CGO_ENABLED should be done only for the target
compiler not the host one.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Christian Stewart <christian@paral.in>

qt5base: make harfbuzz support selectable

If selected use:

 - system/buildroot harfbuzz in case __sync for 4 bytes is supported
 - qt harfbuzz otherwise (using QAtomic instead)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

raspberrypi: post-image.sh fix gpu_mem option

The gpu_mem option is not using the proper option argument which causes sed to
fail.

+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command

The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.

Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.

Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wine: Bump to version 2.0.3

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: Add support of ARC architecture

This enables support for ARC cores in numpy.
Cherry-picked from
https://github.com/numpy/numpy/commit/8edd610ffa3499eea3580f98f296ec80578fba73

Hopefully becomes a part of the next major release (like 1.14).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: Bump version to 1.13.3

This is just a bug-fix release.

Removing 0003-BUG-Ensure-_npy_scaled_cexp-f-l-is-defined-when-need.patch
as it is a part of the release.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: add libressl as a provider

At this point, libressl can be added to the openssl virtual package.

- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: supports only the real OpenSSL, not LibreSSL

wpa_supplicant will not build with LibreSSL without patches, so let's
support only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevent: supports only the real OpenSSL, not LibreSSL

libevent will not build with LibreSSL without patches, so let's
support only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openldap: supports only the real OpenSSL, not LibreSSL

openldap will not build with LibreSSL without patches, so let's
support only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opusfile: supports only the real OpenSSL, not LibreSSL

opusfile will not build with LibreSSL without patches, so let's
support only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mosquitto: supports only the real OpenSSL, not LibreSSL

mosquitto will not build with LibreSSL without patches, so let's
support only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ffmpeg: supports only the real OpenSSL, not LibreSSL

ffmpeg will not build with LibreSSL without patches, so let's support
only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hostapd: supports only the real OpenSSL, not LibreSSL

hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

softether: require libopenssl

softether tries to use SSLv3 functionality as a fallback. LibreSSL
doesn't support SSLv3 anymore. Two main issues prevent a patch:

- Trying to wrap the sslv3 functionality from the source with a guard
  clause results in linking errors after compiling is done.
- There are multiple security vulnerabilities with using sslv3.
- There are multiple security issues in github pertaining to using
  sslv3.
- This project seems to not be updated very often, and the security
  issues are being ignored it seems.

For people who still want to use softether, they will have to use
libopenssl.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

heirloom-mailx: add libressl support patch

heirloom-mailx has two small issues when compiling against LibreSSL:
  - RAND_egd is used (LibreSSL does not support RAND_egd)
    Solution: "Guard" the code calling RAND_egd

  - SSLv3_client_method function is used (LibreSSL does not support SSLv3)
    Solution: "Guard" the code with #ifndef OPENSSL_NO_SSL3

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: introduce BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL

Some packages that use openssl are not compatible with libressl, only
with the real openssl (known as libopenssl in Buildroot). So before we
add libressl as a provider for the openssl virtual package, we
introduce a BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL hidden option that
packages incompatible with LibreSSL will be able to select.

This will allow packages that need OpenSSL to continue using "select",
without having to change to using "depends on" dependencies.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: new virtual package

To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.

Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package.  This offers a few advantages:

- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
  OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: fix openjpeg-2.3 compile failure

Add upstream patch [1], fixes [2]:

  In file included from gstopenjpegdec.h:29:0,
                   from gstopenjpegdec.c:27:
  gstopenjpeg.h:42:37: fatal error: openjpeg-2.2/openjpeg.h: No such file or directory
  #  include <openjpeg-2.2/openjpeg.h>

[1] https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/commit/?id=bff2d834a4a38f64e555cee3d0144fde6c515acd
[2] http://autobuild.buildroot.net/results/884/884956af56f63b2634a1984f5ea416075ed87bc8

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xlib_libXfont: bump version to 1.5.3

Added all hashes provided by upstream.

Removed patches applied upstream:
https://cgit.freedesktop.org/xorg/lib/libXfont/commit/?h=libXfont-1.5-branch&id=a2a5fa591762b430037e33f1df55b460550ab406
https://cgit.freedesktop.org/xorg/lib/libXfont/commit/?h=libXfont-1.5-branch&id=3b08934dca75e4c559db7d83797bc3d365c2a50a

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/testing: update ISO9660 test case Linux kernel

The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa834a4cd76bc7b41089bd93d4c37dfc65 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: Deselect all unconfigured compression options

The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.

This produces the warning:

.config:2216:warning: override: KERNEL_GZIP changes choice state

is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.

Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..

Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing: use more recent toolchains

With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: add workaround patch for musl issue

musl has a bug in that <sched.h> defines CPU_ZERO(), which uses
memset(), but it doesn't have the prototype for it. This has been
fixed by upstream musl but until we rebuild our toolchains, let's have
a patch for Boost that works around this problem. We will of course
remove this patch once musl is updated to 1.1.17 and our toolchains
have been rebuilt.

Fixes:

  http://autobuild.buildroot.net/results/6884cff634367cb640940051a60e5e13f30f70a2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "zstd: install to staging directory"

This reverts commit 95c15aaf15f4bd5b1ebcf87d204ddf5a345197d5. It was
mistakenly pushed, and causes problems because it installs the shared
library to staging, but not to target.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest-game: new package

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest: add libspatialindex optional dependency

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest: add leveldb optional dependency

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest: add hiredis optional dependency

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest: add postgresql optional dependency

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/minetest: enable sound support

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>