git.libre-soc.org Git - buildroot.git/log

prosody: add dependency on shared libraries

The prosody package uses several Lua packages that require shared libraries.
Therefore, prosody must require shared libraries too.

Fixes: http://autobuild.buildroot.net/results/b126bce0bbd111f021ed5be7c8773fef2a8f8579
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: remove Philipp Claves' entry

The email address of Philipp Claves bounces.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcec: disable build infos

Build infos can break the build due to missing terminating " character.

Fixes:
http://autobuild.buildroot.net/results/3b1/3b1182783fc958dfed96c6b1c097993662fc7308

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

grub2: force -fno-stack-protector in CPPFLAGS

In commit 2a27294e9ade6130a12ced9a1f152c51431a870e ("grub2: force
-fno-stack-protector in CFLAGS"), a fix was made to the grub2 package
to make it build properly even when SSP support is enabled.

However, commit 20a4583ebf7fe97ea22a1ea11621dd44a8114ca5 ("security
hardening: add RELFO, FORTIFY options") reworked how SSP options are
passed, and they are now passed in CPPFLAGS instead of CFLAGS, making
the fix introduced by 2a27294e9ade6130a12ced9a1f152c51431a870e no
longer operating.

This commit will force no-stack-protector in CPPFLAGS instead of
CFLAGS.

Fixes bug #10961.

Signed-off-by: Tarek El-Sherbiny <tarek_el-sherbiny@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add test for syslog-ng

Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.

When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

syslog-ng: bump version header in conf file to 3.10

Remove a runtime warning message about configuration file being too old.

Do the same as commit 3dad25466d "syslog-ng: Bump version header in conf
file to 3.9". Package version of syslog-ng is 3.10.1, so bump version
number in syslog-ng.conf to 3.10.

Also add a comment to avoid the same warning message reappears when the
package is bumped.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

download/git: be sure we do fetch something

The different versions of git will behave in different ways when
fetching remote references, as summarised by the table below:

              |     ancient git         | new git
--------------------------------------------------------------------
git fetch     | fetch all refs but tags | fetches all refs but tags
git fetch -t  | fetches only tags       | fetch all refs and tags

(git-fetch may still fetch tags, but only if reachable from a branch)

So, to cover all the bases, we do a simple fetch, to be sure we have
branches, followed by the existing fetch -t, to get extra tags.

Fixes:
    http://autobuild.buildroot.net/results/0a2/0a238a7f55ea56c33b639ad03ed5796143426889/build-end.log

Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external-custom: allow specifying relative path to binaries

There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).

A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".

This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.

Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

lz4: bump to version 1.8.1.2

Use lib and lz4 make targets to avoid build of the manual generator, and
the examples. Both of them use the target compiler to build host tools.

Add license files hashes.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

multicat: bump to version 2.2

Drop upstream patches.

Add upstream patch fixing build with musl libc.

Add license file hash.

Set LDLIBS to TARGET_LDFLAGS for TARGET_LDFLAGS to be added to the link
commands. Makefile does not use the LDFLAGS environment variable. This
fixes static linking.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dhcpc: bump to version 7.0.3

Use sha256 checksum from *.distinfo.asc file.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tslib: update to 1.16

For those who wonder what happend, as usual, there's a changelog summary:
https://github.com/kergoth/tslib/releases

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

download/git: ensure we have a sane repository

There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.

We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:

Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]

Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.

Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

download/git: ensure we always work in the expected repository

git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.

In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...

So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.

Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.

Also fix the one call to git that was not using the wrapper.

Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

pixiewps: add missing dependency on threads

Fixes:

http://autobuild.buildroot.net/results/0c8d0eeb693ac29739845f489caffc2f9fa3b262/

Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

scanpypi: add support for the new PyPI infrastructure

https://pypi.python.org URL has been changed to https://pypi.org.

Package's JSON object now contains sha256 checksum, so use it
instead of locally computed one. Change comments in the hash
file accordingly.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wmctrl: x-includes and x-libraries must be set for cross-compiling

set x-includes and x-libraries configure option for cross-compiling.
wmctrl can use poisoned paths if these options are not passed to
configure script.

Fixes:
http://autobuild.buildroot.net/results/7e5/7e5cba8a5650a00e10d1a5528f38cb2bf772aee1

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

nmap: fix check-package warning

Fixes:

package/nmap/nmap.mk:88: expected indent with tabs
93 lines processed
1 warnings generated

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-xlrd: fix check-package warnings on Config.in.host

Fixes:

package/python-xlrd/Config.in.host:4: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)

https://gitlab.com/buildroot.org/buildroot/-/jobs/63334884

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Config.in: fix check-package warning

Fixes:

Config.in:203: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)
Config.in:204: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)

https://gitlab.com/buildroot.org/buildroot/-/jobs/63334884

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

mariadb: bump version to 10.1.32

Release notes: https://mariadb.com/kb/en/mariadb-10132-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10132-changelog/

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wayland: Bump version to 1.15.0

All hashes provided by upstream.

Updated Yann's patch:
- Took v2 from https://patchwork.freedesktop.org/patch/143038/
- Rebased on top of v1.15

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/weston: Bump version to 4.0.0

Added all hashes provided by upstream.

Yann's patch was integrated in upstream, see:
https://cgit.freedesktop.org/wayland/weston/commit/?id=fa41bdfbc

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

valgrind: bump version to 3.13.0

- update site
- add license hash
- remove 0004-Fixes-for-musl-libc.patch (applied upstream, see [1]) and
corresponding autoreconf option

[1] https://sourceware.org/git/?p=valgrind.git;a=commit;h=f8f1e9cb434cc97ce16586437407a6ac7e6a74a7

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

usb_modeswitch: set CXX to false when C++ is missing

Similar to the openocd fix in commit 5966e2dc54 (package/openocd: fix
fallout after no-C++ fixups) the jimctl that is bundled with
usb_modeswitch also wants to find a binary. This broke with commit
4cd1ab158 (core: alternate solution to disable C++). Revert to 'false'
instead of 'no' here as well.

Fixes:
http://autobuild.buildroot.net/results/b4d/b4d4e925763cb6558af915f9781afe07fc557ebc/
http://autobuild.buildroot.net/results/61b/61b9dc2148df2e8fd0b30e62aedbfd30bb755e19/
http://autobuild.buildroot.net/results/468/468a7e6b049f159fbb4e79d3a12b53ca890f6933/

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

perl: bump to version 5.26.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5: qt5websockets: install missing qml modules

QML modules for QtWebSockets are located in /usr/qml/QtWebSockets since
Qt 5.5.

/usr/qml/Qt/WebSockets still exists for compatibility reasons, but
it contains only a qmldir file which points to ../../QtWebSockets/.

see also: http://doc.qt.io/qt-5.6/qtwebsockets-qmlmodule.html

Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt53d: install missing QML modules, plugins and examples

Some files were missing on the first build of qt53d but added later:
- by qt5base for the plugins because it copies the whole /usr/lib/qt/plugins
directory
- by qt5declarative for the QML modules because it copies the whole
/usr/qml directory

Also, the qt53d examples were not installed if
BR2_PACKAGE_QT5BASE_EXAMPLES was set.

Signed-off-by: Romain Reignier <rom.reignier@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

micropython: bump version to v1.9.3

(With correct formatting now)

The build step now requires building mpy-cross first.

Signed-off-by: Blomme, Maarten <Maarten.Blomme@flir.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

legacy: remove options made legacy 5 years ago

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/swupdate: default website have a new API

2018.03 introduce a new website with Websocket asynchronous
communication[1]

[1] https://github.com/sbabic/swupdate/blob/master/doc/source/mongoose.rst

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-firmware: support paths with subdirs in LINUX_FIRMWARE_DIRS

Following commit cdb7876f63a253254b86637aaac8b255a426b60a
("linux-firmware: add Qualcomm video accelerator and GPU firmware
options"), LINUX_FIRMWARE_DIRS can now contain entries with subdirs,
such as "qcom/venus-1.8". Such entries are currently not supported by
the logic in LINUX_FIRMWARE_INSTALL_DIRS.

Indeed the current logic consists in:

- Removing the destination directory
- Copying to the destination directory

Unfortunately, the last step fails if a component of the path leading
to the destination directory does not exist. To overcome this, we
simply add the appropriate mkdir before the copy.

Fixes:

http://autobuild.buildroot.net/results/54cbca90742faf486e59d95b95a0b0494e47b385/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

alsa-lib: update license file hash

FSF address update.

Fixes:
http://autobuild.buildroot.net/results/1b9/1b9ec9cc0f22a58ad37f21be1b6eb4cc064b6dbc/
http://autobuild.buildroot.net/results/d32/d32ae8b67c1aade7225c42a4685dc62fdaa0b0e3/
http://autobuild.buildroot.net/results/d9b/d9b8e918fa4a1f7a9470473f82bb21b3dce1acc4/

Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

upmpdcli: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tvheadend: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

triggerhappy: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

transmission: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tpm2-abrmd: don't test if the binary exists in the init script

The test doesn't make sense. Buildroot installs both abrmd and its init
script as part of the same package. But if it ever happens for some
reason, the error message from start-stop-daemon should be pretty clear.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tinyhttpd: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

squid: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

prosody: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

proftpd: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

openvpn: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

openntpd: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ntp: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

nfs-utils: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

network-manager: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the NETWORKMANAGER_BIN variable, which was used only once, by
the full path of the binary file.

Drop the now useless variables prefix, exec_prefix and sbindir.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

netsnmp: don't test if the binaries exist in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

netplug: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

neard: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Replace the DAEMON variable, which was used only once, by the full path
of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

mpd: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

modem-manager: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Drop the MODEMMANAGER_BIN variable, which was never initialized.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

haveged: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

eudev: don't test if the binary exists in the init script

The test doesn't make sense. It just exits with error code 5 if the
binary doesn't exist, which is silly. Buildroot installs both udevd and
its init script as part of the same package. But if it ever happens for
some reason, the error message "/sbin/udevd: No such file or directory"
in the start case should be pretty clear.

Replace the UDEV_BIN variable, which was used only once, by the full
path of the binary file.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dnsmasq: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dmraid: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dhcpcd: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dbus: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

bind: don't test if the binary exists in the init script

The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

sqlite: avoid use of unsupported -Ofast CFLAGS

sqlite3 refuses to be built with -ffast-math (a side effect of -Ofast) when it
falls back to implementing its own isnan() function.

sqlite3.c: In function ‘sqlite3IsNaN’:
sqlite3.c:28554:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.

To work around this, when -Ofast is used replace with -O3.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

php: remove Blackfin patch

And renumber remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wayland: remove Blackfin patch

And renumber remaining patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

p7zip: remove Blackfin patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libsepol: remove Blackfin patch

And renumber remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libsemanage: remove Blackfin patch

And renumber the remaining patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libpng: remove Blackfin patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libselinux: remove Blackfin patch

And renumber the remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

icu: remove Blackfin patch

And renumber remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

graphite2: remove Blackfin related patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gdb/7.10: remove Blackfin patch

And renumber remaining patches

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gdb: remove Blackfin patch

And renumber remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ffmpeg: remove Blackfin related patch

And renumber remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cairo: remove Blackfin related patch

And renumber the remaining patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: remove Blackfin related code

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

binutils: remove Blackfin patches

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gcc: remove Blackfin patches

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain, gcc, gdb, binutils, uclibc: remove Blackfin code

This commit removes Blackfin related code from all toolchain code and
components.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: remove Blackfin related code

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: remove Blackfin related code

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: drop BR2_BINFMT_FLAT_SEP_DATA support

This was only used by Blackfin, so there's no good reason to keep it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: remove Blackfin architecture

The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.

The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/gdb_bfin_bf512: remove defconfig

As we are about to remove the Blackfin architecture, remove the only
defconfig that was using this CPU architecture.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments/autobuild: remove Blackfin configuration

In preparation for the removal of the Blackfin architecture, drop the
autobuilder toolchain configuration that was testing Blackfin.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

zeromq: add libunwind as an optional dependency

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

network-manager: support a defaults file in the init script

Sometimes it is useful to pass some parameters to NetworkManager when it
starts (e.g. --log-level) instead of editting NetworkManager.conf. Allow
the user add a file with a NETWORKMANAGER_ARGS variable containing such
flags. This is simpler than overriding the whole startup script (e.g. by
means of a rootfs overlay).

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

swupdate: bump to version 2018.03

Remove upstream patches:
* 0001-compat.h-introduce-compatibility-header.patch
* 0002-Fix-build-if-DOWNLOAD-is-set-but-no-JSON.patch

Update note about bundled modified version of mongoose 6.11.

Update licenses. Some files are LGPL-2.1+ now. Remove Public Domain as the
relevant bundled sqlite3 code was removed some time age.

Regenerated the .config file by doing:

```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ethtool: bump to version 4.15

Add the LICENSE file to license files.

Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

alsa-utils: bump version to 1.1.6

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

alsa-lib: bump to version 1.1.6

Regenerate patches using git as patch 0002 didn't applu and the others
were fuzzy.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: fix authorship in patches, order of SoB and use git
format-patch -N to avoid numbering]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/liteboard: Bump Linux to 4.16.2

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/liteboard: Bump U-Boot to 2018.03

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

valgrind: allow selection on aarch64

valgrind works fine on aarch64, so allow selecting it on that
architecture.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

systemd: add compatibility symlink for 'shutdown'

In addition to the 'halt', 'poweroff', 'reboot' symlinks pointing to
systemctl, add 'shutdown'.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcap-ng: fix compilation without pthread.h

Fixes:
- http://autobuild.buildroot.net/results/6132f33fb282fda3c39deb292784b9006c9e7872

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add missing AUTORECONF = YES, since we're now patching
configure.ac]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

zeromq: patch configure.ac to check for ldaddr on when checking libunwind

configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.

The patch was applied to the zeromq master branch, see:
https://github.com/zeromq/libzmq/commit/c971445025535b9f989ab0b78f5ddd1c026f1878

Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-headers: bump 4.{4, 9}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cjson: bump to version 1.7.6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

flatbuffers: bump to version 1.9.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libglib2: fix gobject with gcc <= 4.7

Patch under upstream review: https://bugzilla.gnome.org/show_bug.cgi?id=795138

Fixes:
- http://autobuild.buildroot.net/results/b29a2f868438a2210873ea72f491db63175848be

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>