git.libre-soc.org Git - buildroot.git/log

boot/uboot: fix the help text of BR2_TARGET_UBOOT_ENVIMAGE_SOURCE

In commit 2c8ff251cb16d38fb417a488ee0367cd03eebda2 ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.

This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.

Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ngrep: relace '_' by '.' in version

In order for the ngrep version to match what is given by
release-monitoring.org, replace '_' by '.' in NGREP_VERSION

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uvw: disable CMake pthread test

Fixes:
- http://autobuild.buildroot.net/results/9c61c06142c832a9669afdcafcbb8b1f7df51082

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gpsd: Fix systemd service installation and paths

Fix several issues with systemd service file installation for gpsd:

- systemd support in the gpsd build was defaulting to enabled or not
based on whether the host system had systemd directories present. Set
this explicitly based on whether BR2_INIT_SYSTEMD is set.

- The installed systemd service files referenced paths in /usr/local when
the actual binaries are installed in /usr. Replace /usr/local with /usr
in the installed service files.

- When BR2_PACKAGE_HAS_UDEV was enabled, all of the binaries were
re-installed again, along with the udev rules, as part of the
post-install hooks. This overwrites the service files that were just
fixed up. Since udev-install implies install, we can just call
udev-install.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/busybox: udhcpc.script: wait for ipv6 default route from RA for stateful DHCPv6

udhcpc6 implements "stateful" DHCPv6 for explicitly requesting an address
and other configuration information. A major difference between DHCPv4
and DHCPv6 is that DHCPv6 does *not* advertise a default route; this is
determined by normal IPv6 autoconfiguration.

Add logic to wait up to IF_WAIT_DELAY seconds for the IPv6 route to be
configured; as above this doesn't come from DHCPv6 but rather the IPv6
Router Advertisement (RA) which happens independently from udhcpc6. The
intent here is to try and ensure that the interface is route-able upon the
script's completion as it would be if called from udhcpc.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/busybox: update udhcpc.script for stateful DHCPv6

udhcpc6 will call the default script with the stateful address set in the
"ipv6" variable. Set "ip" to this address if present, using the /128 prefix
used by stateful DHCPv6 so the existing renew/bound logic can be used like
in DHCPv4.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/docker: add python3

The test infra will soon be converted to Python 3 only.
So add the interpreter and also the Python 3 variant of modules nose2
and pexpect to the docker image used to run runtime tests.

Keep the Python 2 variant of those modules to allow a gradual
transition.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/genrandconfig: test full set of hardening options

This patch adds the remaining ssp and relro cases plus both of the
fortify options. The randomization was left consistant between the
options but the order of the conditions placed the most restrictive
hardening options with more priority.

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/genrandconfig: test configurations with BR2_SSP_ALL

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/genrandconfig: test configurations with BR2_RELRO_FULL

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: bump ARC tools to arc-2019.09-eng002

This commit bumps ARC toolchain to arc-2019.09-eng002. We want to
test how new toolchain-eng002 builds packages, so we can make fixes
before release of toolcain.

Please note that it is an engineering build and it might have all
kinds of breakages, please don't use it for production builds

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/stm32mp157c-dk2: fix typos in readme and extlinux file

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mono: add libunwind optional dependency

Add libunwind dependency as well as a patch to link with it

Fixes:
- http://autobuild.buildroot.net/results/dbd64c89815d393a4e28b312d74fd80ee6de92da

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libunwind: add cxx exceptions support

If C++ is enabled, enable cxx exceptions, so libunwind will implement
_Unwind_GetIP which is used by mono (which already depends on C++)

Fixes:
- http://autobuild.buildroot.net/results/dbd64c89815d393a4e28b312d74fd80ee6de92da

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/musl: Make scheduler functions Linux-compatible

The POSIX functions sched_getscheduler(), sched_setscheduler(),
sched_getparam(), sched_setparam() are technically not correctly
implemented by the Linux syscalls of the same name, because what the
kernel calls a PID and what POSIX calls a PID isn't truly the same,
resulting in somewhat different semantics as to what these functions
exactly apply to.
Details: https://sourceware.org/bugzilla/show_bug.cgi?id=14829

Since the musl developers put a high premium on POSIX compliance, they
deliberately implement these functions to return -ENOSYS instead of
relaying them to the respective Linux syscalls as glibc/uClibc do.

Unfortunally this breaks virtually all Linux programs using these
functions under musl. For example running 'chrt -p 1' fails with
'Function not implemented' on a musl-libc based system.
In particular, it affects embedded systems using these interfaces
for scheduling real-time processes.

As it seems unfeasible to fix all affected programs to manually use
syscall wrappers instead of the libc functions, make musl behave the
Linux way.

Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libsigrok: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsigrok: fix C++ build with doxygen 1.8.16

Fixes:
- http://autobuild.buildroot.net/results/f1d0868e99402954dc96773c5ace192525deeab8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsigrok: fix configure options

- Remove --disable-glibtest (unrecognized option)
- Switch --{en,dis}able-xxx options by --{with,without}-xxx options

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: fix README hash

Fixes: http://autobuild.buildroot.net/results/487/4878af2ed318925ab530062576f91e7a1af47bd5/
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mdevd: bump version to 0.1.1.1

Changelog: http://git.skarnet.org/cgi-bin/cgit.cgi/mdevd/log/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mdevd: fix license hash

Fixes:
http://autobuild.buildroot.net/results/963/963ea38f496cca8d1cc6db7b6d963d0bf40bdef8/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/leveldb: fix malformatted patch

Fixes:
http://autobuild.buildroot.net/results/e46/e46d67d0e8b4b47fc09e631ca46ed02594ced801/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: add config scan directory option

To support using multiple php configuration files, we pass
--with-config-file-scan-dir=/etc/php.d. This allows to put snippets of
PHP configuration files in /etc/php.d.

For php option details see link at [1].

[1] https://www.php.net/manual/en/configuration.file.php

Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
[Thomas: make it unconditional]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/softether: bump to version 4.30-9700-beta

- Update first patch
- Drop last patch, not needed since
https://github.com/SoftEtherVPN/SoftEtherVPN_Stable/commit/553978c9a505c2fa427dba7633e69c8f147e9223
- License is Apache-2.0 since version 4.29-9678-rtm and
https://github.com/SoftEtherVPN/SoftEtherVPN_Stable/commit/0e317124ae6e266d8d5c8c5e6b208633b7706af2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ogre: new package

Ogre needs host-swig with pcre support when python interpreter is
present on the target.
Otherwise the build stop with the following message:
"SWIG:7: Error: PCRE regex matching is not available in this SWIG build."

Ogre has been tested using the SampleBrowser binary but some demos
are not working due to missing optional dependencies (nvidia Cg plugin).

See: https://www.ogre3d.org/2019/05/01/ogre3d-1-12-released

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual/configure.txt: explain how to reuse a Buildroot toolchain as external toolchain

Laurent reported that a short tutorial was missing in the manual to
explain how to reuse a Buildroot toolchain as external toolchain.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Laurent Guillier <laurent.guillier@smile.fr>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: completely rewrite the thing]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/qemu_arm_vexpress_tz: Armv7-A emulation with TrustZone services

This change introduces a Qemu board for an Armv7-A target executing
with OP-TEE secure world services. The target Linux based normal world
embeds the standard minimal filesystem with OP-TEE non-secure components
embedded files from OP-TEE test, examples and benchmark packages.

qemu_arm_vexpress_tz_defconfig differs from qemu_arm_vexpress_defconfig.
Supporting both secure and non-secure worlds on the Arm target mandates
a secure world, here OP-TEE OS, and a bootloader to boot both worlds,
here TF-A (boot/arm-trusted-firmware). Here non-secure Linux kernel is
booted through U-boot

  TF-A bootloader (BL1/BL2) => OP-TEE (BL32) => U-boot (BL33).
  | Executes as secure         | Secure         | Execs as Non-secure
  | Loads BL32/BL33 in RAM     | Jumps to BL33  | Always booted after
  | Jumps to BL32 once done    | as Non-secure  | secure world inits

Vexpress and vexpress-tz defconfigs also differs in that Qemu emulates
a Cortex-A9 in the former and a Cortex-A15 in the later. Cortex-A15
is the Armv7-A CPU used in upstream TF-A and OP-TEE OS packages hence
selected here.

Defconfig adds a fragment to the Linux kernel native configuration to
enable OP-TEE driver support.

Defconfig adds a fragment to the U-Boot native configuration set boot
command, enable semihosting and remove U-Boot persistent environment
storage support.

The defconfig also enables build of the Qemu emulator in case the
system installed Qemu does not yet support CPU TrustZone secure state.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Arnout, with the help of Peter: correct spelling mistakes in readme,
fix U-Boot version to 2019.01, download tarball of TF-A instead of git]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

docs/manual/prerequisite.txt: 'make xconfig' uses Qt5, not Qt4

Since commit 6eacea5a (support/kconfig: bump to kconfig from Linux
4.17-rc2), xconfig uses Qt5, so update prerequisite.txt to match.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain: set TOOLCHAIN_INSTALL_STAGING only once

Currently, we set TOOLCHAIN_INSTALL_STAGING three times: once
(conditionally) in toolchain.mk, and once each (unconditionally) in
pkg-cmake.mk and pkg-meson.mk.

This is a little bit messy... Set it just once, unconditionally, in
toolchain.mk where it belongs.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external: restrict copying of dynamic loader to ld*.so.*

Commit 32bec8ee2fb00c6750fa842bbb0eb79b0c081fa2
("toolchain-external: copy ld*.so* for all C libraries") changed (among
other things) the glob pattern to catch the dynamic loader from
    ld*.so.*
to
    ld*.so*

thus now matching files like 'ld-2.20.so' in addition to files like
'ld.so.1'.

However, there is no apparent reason why that change was made. It is
not explicitly mentioned in the commit message as to why that would be
needed, nor is clear based on the rest of the changes in that
commit. But it turns out that it causes too many files to be copied
with some toolchains.

In most toolchains, the structure looks like this:

-rwxr-xr-x 1 tdescham tdescham 834364 Feb 16 21:23 output/target/lib/ld-2.16.so
lrwxrwxrwx 1 tdescham tdescham     10 Feb 16 21:23 output/target/lib/ld.so.1 -> ld-2.16.so

So, a symlink 'ld.so.1' which points to another file. Applications
would have 'ld.so.1' (the link) encoded as program interpreter
(readelf -l <program>, see INTERP entry)

The patterns like 'ld*.so*' are passed as argument to
copy_toolchain_lib_root which is defined in toolchain/helpers.mk.
This macro copy_toolchain_lib_root will find all files/links matching
the pattern. If a match is a regular file, it is simply copied. If it
is a symbolic link, the link is copied and then the logic is
recursively repeated on the link destination. That destination could
either again be a link or a regular file. In the first case we recurse
again, in the latter we stop and continue with the next match of the
pattern.

The problem this patch is solving is when a toolchain does not have
this structure with a link and a real file, but rather two actual
files:

-rwxr-xr-x 1 tdescham tdescham 170892 Feb 16 21:55 output/target/lib/ld-2.20.so
-rwxr-xr-x 1 tdescham tdescham 170892 Feb 16 21:55 output/target/lib/ld.so.1

In this case the pattern 'ld*.so*' would find two regular file matches
and copy both. On the other hand, the pattern 'ld*.so.*' would only
find the 'ld.so.1' file and copy just that. This saves about 170K in
rootfs size.

Closer inspection reveals that this particular toolchain has more such
dedoubled symbolic links, e.g. the standard pattern of
'usr/lib/libfoo.so -> libfoo.so.1 -> libfoo.so.1.0.2' is not present,
and each of these three components are real files. In any case, it is
obvious that the toolchain itself is 'broken'.

That being said, because we have the logic that recursively resolves
symbolic links, TOOLCHAIN_EXTERNAL_LIBS really only needs to contain
the "initial" name of the library to be copied.

Therefore, revert the glob pattern back to what it was.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: improve the commit log with the additional details from Thomas]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: install cross-compilation.conf during toolchain install

package/meson installs a cross-compilation.conf file in
$(HOST_DIR)/etc/meson, via TARGET_FINALIZE_HOOKS.

package/pkg-cmake.mk installs a toolchainfile.cmake in
$(HOST_DIR)/share/buildroot, via TOOLCHAIN_POST_INSTALL_STAGING_HOOKS.

Both files have a similar concept, they describe some flags/paths needed for
compilation using respective build systems. One difference is that the meson
file is added for external compilation, from the SDK, while the cmake file
is used internally in Buildroot.

The 'problem' of using TARGET_FINALIZE_HOOKS for the meson file, is that it
installs a 'host' file from target-finalize, which is conceptually incorrect
since not just TARGET_DIR but also HOST_DIR is "regenerated" on a subsequent
'make' when everything was already built (i.e. only target-finalize is run).

This can easily be fixed, by using the same hook as cmake uses, i.e.
TOOLCHAIN_POST_INSTALL_STAGING_HOOKS.

Note that actually even for cmake, TOOLCHAIN_POST_INSTALL_STAGING_HOOKS is
not the best hook to install a host file. A better hook would have been
TOOLCHAIN_POST_INSTALL_HOOKS, but this triggers only for 'host' packages,
and 'toolchain' is treated as a 'target' package.

Also, the hook (and therefore also the definition of
PKG_MESON_INSTALL_CROSS_CONF) is moved to pkg-meson.mk, again to make it
more similar to how it's done for cmake. Otherwise check-package
complains that the meson package is setting variables that don't start
with MESON_.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libkcapi: support building kcapi-enc application

Just add a new Kconfig option in order to support building kcapi-enc
application.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/exfat{,-utils}: fix installation path of the helper/utilities

"mount" from the "util-linux" package does expect the helper utilities
in "/sbin" and not "/usr/sbin". We use "--exec-prefix=/" to fix the
issue. The man-pages are then still installed under "/usr/share/man".

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/stm32mp157_dk: rename to the sm32mp157c_dk2

That is useful and needed for upcoming introducing stm32mp157a-dk1 board.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysvinit: comment out login line in inittab if getty is disabled

When the "Run a getty" option is disabled, sysvinit doesn't remove the
/etc/inittab line from previous builds. With this patch, the line is
correctly commented out.

Based on similar change made by Stephen Bos <stephen.bos@hagergroup.com>
and Christophe Blaess <christophe.blaess@logilin.fr> for busybox.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mdevd: new package

This new package provides mdevd, a small daemon managing kernel hotplug
events similar to udevd.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/busybox: write commented login line in /etc/inittab when getty disabled

When the "Run a getty" option is disabled, busybox doesn't remove the
/etc/inittab line from previous builds. With this patch, the line is
correctly commented out.

Signed-off-by: Stephen Bos <stephen.bos@hagergroup.com>
Co-authored-by: Stephen Bos <stephen.bos@hagergroup.com>
Co-authored-by: Christophe Blaess <christophe.blaess@logilin.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dt: add license hash

While at it, drop the "Calculated based on the hash above" comment,
which doesn't make any sense: you don't calculate a hash based on
another hash.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cppunit: bump version to 1.14.0

Release notes:
https://cgit.freedesktop.org/libreoffice/cppunit/tree/NEWS

Added sha256 hash provided by upstream, and therefore drop our locally
calculated sha512 hash. Add hash for the license file as well.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flannel: add license file hash

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/wandboard: drop custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/roseapplepi: drop custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/raspberrypi/post-image.sh: pass an empty rootpath to genimage

genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root
so passing TARGET_DIR would be a waste of time and disk space. We don't
rely on genimage to build the rootfs image, just to insert a pre-built
one in the disk image.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/pandaboard: drop custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/minnowboard_max: drop custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/minnowboard_max-graphical: don't use custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone: don't use custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beagleboneai.

Keep the post-image script because it is still used by beaglebone_qt5.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beagleboardx15: drop custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/genimage.sh: pass an empty rootpath to genimage

genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root
so passing TARGET_DIR would be a waste of time and disk space. We don't
rely on genimage to build the rootfs image, just to insert a pre-built
one in the disk image.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/engicam_imx6qdl_icore_qt5: Remove the swrast option

i.MX6 has GPU in hardware, so we really don't need to
fallback to software rendering.

Remove the unneeded BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
option.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/engicam_imx6qdl_icore_qt5: Select the KMSRO gallium driver

After migrating to Mesa 19.2 the imx-drm_dri.so is no longer installed
unless the kmsro gallium driver is selected, so explicitly select
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_KMSRO to fix the problem.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus-python: bump to version 1.2.12

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus-python: remove unrecognized options

--disable-html-docs and --disable-api-docs has been removed since
version 1.2.8 and
https://github.com/freedesktop/dbus-python/commit/721ef6373069bfc6955018681204e20e1ad836e4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-scapy3k: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/x11r7/xlib_libXvMC: remove xlib_libXv dependency"

This reverts commit 52ac6d1c6bc625d8438539a7ff0f35d2057e9acc.

While looking at mesa3d package, I found this commit [1] about libxv
refering to an upstream commit [2].

The commit message is confusing "This library does not itself require
libXv for anything." but xv is still checked by the configure script
(pkg-config) and libXvMC still include Xvlib.h from XvMClib.h

In file included from XvMClibint.h:7:0,
from XvMC.c:5:
../include/X11/extensions/XvMClib.h:5:10: fatal error: X11/extensions/Xvlib.h:
No such file or directory
#include <X11/extensions/Xvlib.h>
^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

So, xlib_libXv sill use xv library by including a header and using
XvImageFormatValues.

[1] https://cgit.freedesktop.org/mesa/mesa/commit/?id=2dbf10ba3d129d59e1a6c0e46b24c20629b277c6
[2] https://gitlab.freedesktop.org/xorg/lib/libxvmc/commit/dd9ae03725990ee9c9336bca4b267dfbb696002f

Fixes:
http://autobuild.buildroot.org/results/305/3051f4fbc1ab725de542a550e4f9eeb3cae385b8

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flannel: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pru-software-support: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Cc: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dt: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-plugins-bayer2rgb-neon: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-net-snmp: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/spidev_test: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/softether: remove 'v' prefix

Fixes version parsing for release-monitoring.org support.

Cc: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dav1d: bump version to 0.5.1

Changelog: https://code.videolan.org/videolan/dav1d/blob/master/NEWS

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/doxygen: bump version to 1.8.16

Added license hash, updated _SITE.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/eudev: bump version to 3.2.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/check-package: report := that appends to variables

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

fs: don't use := when not needed

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gcc: don't override a variable

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/zmqpp: don't override variable

Instead of reseting the variable when we can't set it, just set it when
we can: we just have to negate the condition.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ligpgme: don't use :=, use += and subst

This makes it more in-line with how we handle such case in the
rest of Buildroot.

Also, move the variable assignment before its use. Even though
in a makefile that does not matter, it makes it cleaner, more
logical, and easier to follow (for us mere humans).

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libidn2: get rid of remnants of using := in LICENSE

There is no longer any reason to assign to LICENSE using an
immediate assignment. There was even no reason to use it
either in the first assignment.

Drop it.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gstreamer1/gst1-plugins-bad: get rid of remnants of using := in LICENSE

There is no longer any reason to assign to LICENSE using an
immediate assignment. There was even no reason to use it
either in the first assignment.

Drop it.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/*: do not override LICENSE, but append to it

Now that the infra takes care of removing extraneous spaces before
commas, we can safely append to LICENSE variables.

This removes the only case where we had to use immediate assignment
to append to a variable.

Mechanical change, with:

$ sed -r -i -e 's/\<([^[:space:]]+_LICENSE) := \$$\1$,/\1 += ,/' \
$(git grep -l -E '\<([^[:space:]]+_LICENSE) := \$$\1$,')

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

core/legal-info: don't require overriding _LICENSE

Currently, the formatting we impose on the _LICENSE variable requires
that we also use the rarely used := assignment operator, which makes
the _LICENSE variable the only variable that users have to write with
this operator.

This really departs from the simplicity and consistency of using the
append-assignment, which we use for every other variable.

This is because the append-assignment operator surreptiously
introduces a space between the original value and the appended one. But
we can use this knowledge, to match any instance of a space followed by
a comma, and turn it into a single comma.

This allows users to now have a consistent use of the '=' and '+='
operators we use everywhere else in .mk files.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libopenssl: set no-asm with generic architectures

Use no-asm when building with generic architectures such as gcc or
linux-generic32, see https://github.com/openssl/openssl/issues/9839

This will fix a static build failure on x86_64 due to the removal of
x86/x86_64 BSAES and AES_ASM support by
https://github.com/openssl/openssl/commit/87bea6550ae0dda7c40937cff2e86cc2b0b09491

Fixes:
- http://autobuild.buildroot.org/results/e4f04bb13ec1b82b73db645bea4933e52bca4185

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ccache: bump version to 3.7.5

Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/leveldb: fix build for gcc < 5.x

Without defining LEVELDB_HAS_PORT_CONFIG_H port/port_config.h will not
be included:
https://github.com/google/leveldb/blob/master/port/port_stdcxx.h#L8

which breaks endian detection. Add the define to our memenv patch to fix
building with gcc < 5.
__has_include was added in gcc5: https://gcc.gnu.org/gcc-5/changes.html

Fixes:
http://autobuild.buildroot.net/results/4ac/4ac8fbed79307326086ab294eba9e68cf208e6ac/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libopenh264: fix mips build

Although this PR is still discussed upstream it

Fixes:
http://autobuild.buildroot.net/results/081/081c0426dde94015f5391e612454fc0b86888943/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/glog: bump to version 0.4.0

Also fixed a build issue reported by test-pkg.

We now need to AUTORECONF as the pre-generated configure script is no
longer provided in the Git repository.

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gflags: bump to version 2.2.2

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/check: bump version to 0.13.0

Release notes: https://github.com/libcheck/check/releases

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncdu: bump to version 1.14.1

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xapian: bump to version 1.4.13

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ccid: bump version to 1.4.31

Changelog: https://salsa.debian.org/rousseau/CCID/blob/master/README.md

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-zigbee: use official tarball

- Use official tarball instead of using git
- Add linux-zigbee.hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/stm32mp157_dk: bump U-Boot to 2019.10

Add patch to fix mounting rootfs partition properly.
This issue is already reported upstream.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/stmicroelectronics/stm32mp157-dk: rename uboot partition in genimage.cfg

Change partition name according to the U-Boot requirements.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

packages: host gcc >= 4.8 is now guaranteed

... so we can drop all config options about it and previous versions.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: bump our gcc/g++ requirements to 4.8

Currently, we only require a gcc 4.4 version, which now is pretty old
(released in April 2009). This requirement is not even tested nowadays,
with our oldest autobuilder having a 4.7 version only.

And even then, 4.7 is still old enough that it prevents us from
upgrading some packages. For example cmake 3.10+ requires C++11
constructs that were only added in gcc 4.8 (when C++11 support was
finally completed in gcc).

So, update our requirements for gcc to at least 4.8.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gvfs: fix static build with libarchive

Use pkg-config to retrieve static dependencies of libarchive in gvfs.mk
instead of patching configure.ac as upstream switched to meson

Fixes:
- http://autobuild.buildroot.org/results/486187bb7b8800f44a8c173af518b84e68e53584

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/supervisor: fix license

trackrefs module has been removed since version 4.0.0 and
https://github.com/Supervisor/supervisor/commit/6c1c0adadaf190e77dc017a8a40c90249f0a055b

Since this removal, supervisor does not contain any ZPL-2.1 code
anymore, see
https://github.com/Supervisor/supervisor/commit/abff4cd872d2cbd1b999c1f439fdf83b4695cc6c

Fixes:
- http://autobuild.buildroot.org/results/540303f884d9f891f58c660da22e2273956a92a6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rng-tools: powerpc64le requires libgcrypt

This patch adds the libgcrypt dependency for rngd_darn support
when building for the specific BR2_powerpc64le archtecture.
This entropy source is only enabled when powerpc64le is selected.

Fixes:
http://autobuild.buildroot.net/results/a41/a412ccef864e8279dcc917e106b5f7b515ed95da/

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mcelog: bump to version 165

- Switch site to github
- Use new LICENSE file added in version 160 with
https://github.com/andikleen/mcelog/commit/f402998fa6943f3c4c4a2903d1ac85bcd92df75f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/file: add upstream security fix

Fixes the following security vulnerability:

- CVE-2019-18218: cdf_read_property_info in cdf.c in file through 5.37 does
not restrict the number of CDF_VECTOR elements, which allows a heap-based
buffer overflow (4-byte out-of-bounds write).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mjpegtools: fix build with -fPIC on x86

Retrieve upstream patch to fix build with BR2_PIC_PIE on x86

Fixes:
- http://autobuild.buildroot.org/results/b1252b7907944d227694ad8506de25881bf2ca04

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: python is no longer a mandatory dependency

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/dependencies: don't check for python on the host

We no longer have anything that needs it during the build, so we don't
require it anymore.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: drop check-uniq-files

Back a few years ago, when we were starting to think about top-level
parallel build, we were not sure how to deal with packages that
installed the same files, so we wanted to catch the situation to assess
how prevalent that was, before we decided what to do and how to address
it.

However, the trend nowadays is that packages will install in a
per-package target/ (and staging/ and host/), and the final directories
will be assembled in a reproducible (alphabetical) order, so if two
packages install the same file, the last one will win (as is currently
the case).

Besides, check-uniq-files reports loads of spurious errors when packages
get reinstalled (e.g. during development).

Finally, check-uniq-files is the only script called during the build,
that is written in python.

So, get rid of check-uniq-files.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>