Romain Naour [Mon, 4 May 2015 22:01:48 +0000 (00:01 +0200)]
toolchain-external: fix installation for CodeSourcery AArch64 toolchain
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Waldemar Brodkorb [Fri, 29 Apr 2016 17:48:40 +0000 (19:48 +0200)]
move busybox-minimal.config to be used by other noMMU targets
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:26 +0000 (14:38 -0300)]
qemu/x86*: update instructions to use virtio
Switch the invocation command to use virtio-blk and virtio-net for
better performance.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:25 +0000 (14:38 -0300)]
qemu/x86*: enable virtio for kernel config
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 17:38:24 +0000 (14:38 -0300)]
qemu/x86: use symlinked kernel config
It's exactly the same as the x86_64 variant so just create a symlink.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 29 Apr 2016 17:59:38 +0000 (19:59 +0200)]
opkg: add missing dependency on libarchive
opkg requires libarchive. This was expressed in the Config.in file with a
select, but not in the .mk file.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sat, 30 Apr 2016 08:33:07 +0000 (10:33 +0200)]
libtommath: build with -fPIC
This fixes the build on x86_64, see:
http://autobuild.buildroot.net/results/212/
212469db5dc8399070390603c0fdf7f12b130cda/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sat, 30 Apr 2016 10:00:46 +0000 (12:00 +0200)]
perl: bump to version 5.22.2
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 29 Apr 2016 12:16:48 +0000 (09:16 -0300)]
linux-headers: bump 4.1.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Fri, 29 Apr 2016 06:24:46 +0000 (08:24 +0200)]
shairport-sync: bump to version 2.8.3
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Fri, 29 Apr 2016 00:19:56 +0000 (21:19 -0300)]
php: security bump to version 5.6.21
Fixes (CVEs not assigned yet):
bug #72094 - Out of bounds heap read access in exif header processing
bug #71912 - libgd: signedness vulnerability
bug #72061 - Out-of-bounds reads in zif_grapheme_stripos with negative offset
bug #71843 - null ptr deref ZEND_RETURN_SPEC_CONST_HANDLER
bug #71952 - Corruption inside imageaffinematrixget
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Trent Piepho [Tue, 8 Mar 2016 21:02:15 +0000 (21:02 +0000)]
purge-locales: Handle empty locale directories better
If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.
Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.
If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 21:29:13 +0000 (23:29 +0200)]
configs/sheevaplug_defconfig: use 4.5.2 kernel, configure eth0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Thu, 28 Apr 2016 19:59:31 +0000 (21:59 +0200)]
moarvm: use libtommath
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:55 +0000 (17:30 -0300)]
xf86-input-libinput: bump to version 0.18.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:34 +0000 (17:30 -0300)]
xterm: bump to version 324
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:30:06 +0000 (17:30 -0300)]
libxkbcommon: bump to version 0.6.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 20:29:43 +0000 (17:29 -0300)]
sshfs: bump to version 2.7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 18:28:43 +0000 (15:28 -0300)]
subversion: security bump to version 1.9.4
Fixes:
CVE-2016-2167 - svnserve/sasl may authenticate users using the wrong
realm.
CVE-2016-2168 - Remotely triggerable DoS vulnerability in mod_authz_svn
during COPY/MOVE authorization check.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Martin Bark [Thu, 28 Apr 2016 15:39:55 +0000 (16:39 +0100)]
package/nodejs: bump version to 6.0.0
See https://nodejs.org/en/blog/release/v6.0.0/
The patches from 5.11.0 have been copied to 6.0.0 with the following
changes:
- Removed 0001-Remove-dependency-on-Python-bz2-module.patch,
0003-Fix-va_list-not-declared.patch and
0004-Fix-support-for-uClibc-ng.patch as all 3 have been fixed upstream
- Renamed 0002-gyp-force-link-command-to-use-CXX.patch to
0001-gyp-force-link-command-to-use-CXX.patch
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 28 Apr 2016 14:33:07 +0000 (11:33 -0300)]
mpv: va-api requires egl-drm, wayland and/or x11
The VA-API acceleration requires one or more of the egl-drm, wayland
and/or x11 backends.
Since the egl-drm backend means LIBGL (X11) + EGL + DRM we'll handle it
later once the mesa3d libgl hidden knob is applied.
So for now we'll support wayland and x11 until that happens. Fixes:
http://autobuild.buildroot.net/results/4b9/
4b98d0c2c0617715e77fb47b3d97037c6b7562ec/
[Peter: pass --disable-vaapi if libva isn't enabled,
invert wayland/X11 test as suggested by Thomas]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Thu, 28 Apr 2016 14:26:23 +0000 (16:26 +0200)]
package/libdrm: bump version to 2.4.68
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Sun, 10 Apr 2016 14:55:25 +0000 (16:55 +0200)]
libtomcrypt: new package
[Peter: fix building without wchar]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Francois Perrad [Sun, 10 Apr 2016 14:55:24 +0000 (16:55 +0200)]
libtommath: new package
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 12:14:33 +0000 (14:14 +0200)]
mpv: fix typo in xkbcommon comment
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 28 Apr 2016 12:11:41 +0000 (14:11 +0200)]
chrony: bump version
From the release notes:
Enhancements
------------
* Add support for NTP and command response rate limiting
* Add support for dropping root privileges on Mac OS X, FreeBSD, Solaris
* Add require and trust options for source selection
* Enable logchange by default (1 second threshold)
* Set RTC on Mac OS X with rtcsync directive
* Allow binding to NTP port after dropping root privileges on NetBSD
* Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port is disabled
* Resolve names in separate process when seccomp filter is enabled
* Replace old records in client log when memory limit is reached
* Don't reveal local time and synchronisation state in client packets
* Don't keep client sockets open for longer than necessary
* Ignore poll in KoD RATE packets as ntpd doesn't always set it correctly
* Warn when using keys shorter than 80 bits
* Add keygen command to generate random keys easily
* Add serverstats command to report NTP and command packet statistics
Bug fixes
---------
* Fix clock correction after making step on Mac OS X
* Fix building on Solaris
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julian Scheel [Mon, 25 Apr 2016 08:09:29 +0000 (10:09 +0200)]
package/cryptopp: Backport gcc compatibility patch
Import patch from cryptopp upstream which fixes the gcc version checks
for using attribute deprecated with messages. Fixes build with host
gcc versions < 4.5.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- directly use the patch from upstream through <pkg>_PATCH rather
than storing it in package/cryptopp/, as it helps avoiding
line-endings problems: upstream has the source code with DOS line
endings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 28 Apr 2016 11:20:45 +0000 (08:20 -0300)]
mpv: fix wayland deps
The wayland backend requires libxkbcommon, so when wayland is available
select it to avoid build failure and obscure dependencies. Fixes:
http://autobuild.buildroot.net/results/ed2/
ed2660361c9720e48dd5959f2711fd7f14031b0d/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:21:00 +0000 (23:21 +0200)]
raspberrypi3_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:20:59 +0000 (23:20 +0200)]
raspberrypi2_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Mauduit [Wed, 27 Apr 2016 21:20:58 +0000 (23:20 +0200)]
raspberrypi_defconfig: bump to kernel version 4.4.8
Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Seiderer [Mon, 25 Apr 2016 21:48:34 +0000 (23:48 +0200)]
rpi-firmware: change overlay file suffix from dtb to dtbo
Commit
dc7b1c0 (rpi-firmware: bump version) bumped rpi-firmware to a version
based on kernel 4.4.x, but didn't update the overlay logic to handle the
.dtbo files from dynamic device tree support.
For details, see:
https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732
[Peter: extend description]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 27 Apr 2016 13:12:02 +0000 (10:12 -0300)]
mpv: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Apr 2016 13:54:03 +0000 (15:54 +0200)]
gcc: add support for gcc 6
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Mon, 25 Apr 2016 19:54:43 +0000 (21:54 +0200)]
yajl: remove obsolete patch
Commit
302563539dacb284576a443401cdfd061eb2e1e8 fixes link with libm for all
targets linking against libyajl{,_s}. This makes patch "0001-cmake-uClibc-Fix
-missing-libm-for-tests" obsolete so it is safe to remove it.
Instead of renumbering all remaining patches the patch defined in YAJL_PATCH
is fetched and put intto the packages directory. Having all the patches in one
places makes the number and order of the patches applied to the package more
clear.
Align patch "0003-Link-with-shared-libyajl-in-a-shared-build" with commit
302563539dacb284576a443401cdfd061eb2e1e8 and remove linking with libm from
test/api/CMakeLists.txt.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gwenhael Goavec-Merou [Wed, 27 Apr 2016 10:18:48 +0000 (12:18 +0200)]
libusbgx: new package
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Wed, 27 Apr 2016 10:25:09 +0000 (11:25 +0100)]
gzip: bump version to 1.8
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:03 +0000 (22:15 +0200)]
toolchain/helper: update check_unusable_toolchain comment
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:02 +0000 (22:15 +0200)]
toolchain-external: move the sysroot check to helper function
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e8a832a351f8552eb032e4b18431949.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Wed, 27 Apr 2016 20:15:01 +0000 (22:15 +0200)]
toolchain-external: add a check for unsupported toolchains
Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"
This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.
cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied
This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].
Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var
Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var
Add a check to error out with an explicit error message
The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.
[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 10:49:03 +0000 (12:49 +0200)]
package/x264: bump version
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 11:05:51 +0000 (13:05 +0200)]
package/dovecot-pigeonhole: bump version to 0.4.14
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Wed, 27 Apr 2016 11:05:50 +0000 (13:05 +0200)]
package/dovecot: bump version to 2.2.24
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Wed, 27 Apr 2016 10:38:48 +0000 (07:38 -0300)]
ruby: bump to version 2.3.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vincent Stehlé [Wed, 27 Apr 2016 13:12:44 +0000 (15:12 +0200)]
i7z: new package
"A better i7 (and now i3, i5) reporting tool for Linux."
i7z can print out the C-states and temperature for i3, i5 and i7 based
Core processors from Intel (including Nehalems, Sandy Bridge and Ivy
Bridge).
https://github.com/ajaiantilal/i7z
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Wed, 27 Apr 2016 17:25:41 +0000 (14:25 -0300)]
linux-headers: bump 3.{4, 12, 18}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 25 Apr 2016 22:22:14 +0000 (00:22 +0200)]
package/x11r7/xlib_libXfixes: fix compile error by backporting upstream commit
Fixes an error not yet caught by autobuilders:
In file included from SaveSet.c:27:0:
Xfixesint.h:67:20: error: static declaration of '_XEatDataWords' follows non-static declaration
static inline void _XEatDataWords(Display *dpy, unsigned long n)
^
To reproduce use this defconfig:
BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_OPTIMIZE_3=y
BR2_GLIBC_VERSION_2_23=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_5_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFIXES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 25 Apr 2016 17:50:41 +0000 (19:50 +0200)]
package/jsoncpp: Do not treat conversion warning as error
Fixes
http://autobuild.buildroot.net/results/74b/
74b1b9f8defc275ff2bc3d877faf2863929737b9/
http://autobuild.buildroot.net/results/71d/
71dcaf18e3d42c66af8036a68250eea1be09227b/
http://autobuild.buildroot.net/results/599/
5997a9e4a8ca8b6171438495920d0a487518851c/
http://autobuild.buildroot.net/results/4ab/
4abde1d7fd631d3b50a6b53824a781a08d022bca/
http://autobuild.buildroot.net/results/968/
9680ebd8c804ef15d471519d54f8aa209710414d/
http://autobuild.buildroot.net/results/d5b/
d5be4d51458ca10f3f4ff5fd3ad4b3cfd097f3ad/
http://autobuild.buildroot.net/results/b1e/
b1e3fc27f3d0cdd6ca8f7aff06f7d5e4108817ec/
http://autobuild.buildroot.net/results/ffb/
ffb40572269c63438228000495e1dc78c778788e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Tue, 26 Apr 2016 12:02:40 +0000 (13:02 +0100)]
ipmitool: add an option to enable/disable ipmishell
Fixes:
http://autobuild.buildroot.net/results/a62/
a62e95619acb3d4d6be4425cf44a4628ac227494/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Tue, 26 Apr 2016 12:02:39 +0000 (13:02 +0100)]
ipmitool: explicitly enable lanplus when selected
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:55 +0000 (10:36 +0300)]
c-icap: avoid host library search path
Add AUTORECONF as a workaround to the effect of '-Wl,-rpath -Wl,/usr/lib' that
c-icap adds to the linker command.
Fixes:
http://autobuild.buildroot.net/results/077/
077374329b2782dbb4b4a9ee7af264cdda311ccc/
http://autobuild.buildroot.net/results/057/
057a88179150a4f02990d7b9b0d8f2de3c9da1a3/
http://autobuild.buildroot.net/results/da6/
da62b80989df6b8f1b5557b4987d7a6999d30bb8/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:54 +0000 (10:36 +0300)]
c-icap-modules: bump to version 0.4.2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 26 Apr 2016 07:36:53 +0000 (10:36 +0300)]
c-icap: bump to version 0.4.2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Tue, 26 Apr 2016 10:28:58 +0000 (11:28 +0100)]
package/nodejs: bump version to 5.11.0
See https://nodejs.org/en/blog/release/v5.11.0/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Tue, 26 Apr 2016 10:28:57 +0000 (11:28 +0100)]
package/nodejs: bump version to 0.10.44
See https://nodejs.org/en/blog/release/v0.10.44/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 26 Apr 2016 16:58:41 +0000 (13:58 -0300)]
glib-networking: bump to version 2.48.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 26 Apr 2016 16:58:24 +0000 (13:58 -0300)]
libsoup: bump to version 2.54.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 21:50:30 +0000 (23:50 +0200)]
wf111: bump to 5.2.2-r2
This revision fixes the build with recent kernel versions, which have
seen changes in the MMC framework breaking the build of external SDIO
drivers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 21:49:32 +0000 (23:49 +0200)]
wf111: properly define and use the WF111_VERSION variable
Instead of hardcoding again the version of the package when defining
WF111_SOURCE, this commit changes the WF111_VERSION so that it
contains the entire version number, and then modifies the WF111_SOURCE
definitions to use WF111_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matthew Starr [Tue, 3 Nov 2015 16:52:13 +0000 (17:52 +0100)]
wf111: fix overwriting module files during install
When installing the WF111 modules, the module.* files generated during
the kernel compilation were overridden. This ended up having the wrong
information about the modules compiled in a given image (and only the
one about the WF111 module). This could be verified using the
"modprobe -l" command, with only the wf111 module showing up.
This patch fixes this by invoking the install_static target (which
will do both the build and installation) in WF111_INSTALL_TARGET_CMDS.
This way the files are not overridden but instead updated with the
additional WF111 informations.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 20:53:11 +0000 (22:53 +0200)]
toolchain-external: remove useless shell continuations
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 25 Apr 2016 20:12:43 +0000 (22:12 +0200)]
toolchain-external: rename Blackfin related special variables
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:26 +0000 (20:20 +0100)]
toolchain-external: unify LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:25 +0000 (20:20 +0100)]
toolchain-external: align library locations in target and staging dir
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:24 +0000 (20:20 +0100)]
toolchain-external: extract installation of gdbserver to separate define
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Fri, 12 Feb 2016 19:20:22 +0000 (20:20 +0100)]
toolchain-external: blackfin: install FDPIC libraries also to staging
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sebastian Frias [Mon, 25 Apr 2016 14:52:17 +0000 (16:52 +0200)]
linux: properly install all images in the initramfs case
The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit
055e6162bba7 ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bba7 ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Mon, 25 Apr 2016 14:41:35 +0000 (15:41 +0100)]
lvm2: bump version to 2.02.151
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 25 Apr 2016 12:18:54 +0000 (14:18 +0200)]
package/x11r7/xdriver_xf86-video-openchrome: bump version to 0.4.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 25 Apr 2016 09:37:00 +0000 (11:37 +0200)]
package/mesa3d: remove unneeded comment
https://git.busybox.net/buildroot/commit/package/mesa3d?id=
f1894ec95728806e09405d26663e0ea371afaeab
removed the dependency on X.org for DRI drivers but forgot to remove
the corresponding comment.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Mon, 25 Apr 2016 09:34:16 +0000 (11:34 +0200)]
package/glmark2: remove unneeded comment
glmark2 depends on mesa3d which already depends on BR2_INSTALL_LIBSTDCPP
and BR2_TOOLCHAIN_HAS_THREADS_NPTL, glmark2 does not depend on udev so
the comment stating all these dependencies is not needed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 25 Apr 2016 01:36:08 +0000 (22:36 -0300)]
libfuse: bump to version 2.9.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 25 Apr 2016 01:34:42 +0000 (22:34 -0300)]
wireshark: security bump to version 2.0.3
Fixes:
WNPA-SEC-2016-19 - The NCP dissector could crash.
WNPA-SEC-2016-20 - TShark could crash due to a packet reassembly bug.
WNPA-SEC-2016-21 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-22 - The PKTC dissector could crash.
WNPA-SEC-2016-23 - The PKTC dissector could crash.
WNPA-SEC-2016-24 - The IAX2 dissector could go into an infinite loop.
WNPA-SEC-2016-25 - Wireshark and TShark could exhaust the stack.
WNPA-SEC-2016-26 - The GSM CBCH dissector could crash.
WNPA-SEC-2016-27 - MS-WSP dissector crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Mon, 25 Apr 2016 13:29:38 +0000 (15:29 +0200)]
Revert "core/pkg-kconfig: use olddefconfig when available"
This reverts commit
638ea2d715950f1409475e01a37f25c3528df35e, since it
breaks the build of busybox in many configurations, with the following
issues:
/bin/bash: : command not found
make[1]: Entering directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
[...]
GEN miscutils/Config.in
make[2]: *** No rule to make target `olddefconfig'. Stop.
make[1]: *** [olddefconfig] Error 2
make[1]: Leaving directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
make: *** [/home/test/autobuild/instance-0/output/build/busybox-1.24.2/.config] Error 1
make: Leaving directory `/home/test/autobuild/instance-0/buildroot'
See:
http://autobuild.buildroot.org/results/
48481bb3531927be35cda3df57d02f02cec709aa/
for example.
A minimal configuration with just Busybox doesn't exhibit the problem,
but adding libtirpc in the configuration is enough to trigger the
problem, so the following defconfig allows to reproduce the issue:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/
br-arm-full-2016.02-3-g762b7c9.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_7=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_LIBTIRPC=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Mon, 25 Apr 2016 07:35:32 +0000 (09:35 +0200)]
configs/raspberrypi3: sync kernel version with rpi/rpi2
Move to 4.4 series.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ubaldo Porcheddu [Sat, 23 Apr 2016 20:12:50 +0000 (20:12 +0000)]
configs: add Raspberry Pi 3 defconfig
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.
[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 24 Apr 2016 19:36:58 +0000 (21:36 +0200)]
configs/*: drop explicit BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
Commit
7f1f9185e (system: default to devtmpfs for /dev) changed our default
for /dev handling, but didn't remove the explicit selection of devtmpfs from
a number of defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Fri, 22 Apr 2016 13:36:28 +0000 (15:36 +0200)]
python-iowait: new package
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Izard [Sat, 23 Apr 2016 17:46:04 +0000 (19:46 +0200)]
core/pkg-kconfig: use olddefconfig when available
Using 'yes "" | make oldconfig' to regenerate a .config file from an
existing defconfig does not work reliably in all cases. Specifically, it
does not work well with tristate choice entries.
The correct way to do it is to use 'make olddefconfig', but this target
is not supported in projects that use an old version of kconfig. As
most projects do not use tristate entries, there is no need for them to
upgrade.
'oldnoconfig' is an alias for 'olddefconfig', but it also is the only
name for this target between Linux versions 2.6.36 and 3.6.
Check which targets are supported by the current project, and use the
appropriate method to regenerate the .config file.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
[yann.morin.1998@free.fr: use a shell construct instead of makefile code]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Seiderer [Sat, 23 Apr 2016 20:40:57 +0000 (22:40 +0200)]
qt5base: fix sparc glibc libatomic link problem
Fixes [1]:
undefined reference to `__atomic_fetch_add_4'
Upstream patch from QTBUG-51621 ([2], [3]).
[1] http://autobuild.buildroot.net/results/8e7/
8e7ff74abdd6274c257a928113e50f534a142650
[2] https://bugreports.qt.io/browse/QTBUG-51621
[3] https://codereview.qt-project.org/#/c/151273/3
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:08 +0000 (11:44 -0300)]
linux-firmware: add support for intel iwlwifi 6000g2b
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:07 +0000 (11:44 -0300)]
linux-firmware: add support for intel iwlwifi 3168
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:06 +0000 (11:44 -0300)]
linux-firmware: add support for intel iwlwifi 8265
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:05 +0000 (11:44 -0300)]
linux-firmware: add support for intel iwlwifi 8000C
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:04 +0000 (11:44 -0300)]
linux-firmware: bump version
Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions and new chipset
support as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:03 +0000 (11:44 -0300)]
linux-firmware: add support for intel iwlwifi 7265D
It selects 7265 non-D firmware since they share the same firmware for
old kernel versions (rev 10 D-variant is the same as rev 10 non-D).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add a comment about the select in Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 19 Apr 2016 14:44:02 +0000 (11:44 -0300)]
linux-firmware: drop revision handling for iwlwifi
This avoids a lot of unnecessary complication with lots of revison
knobs for different chipsets and it's consequence when bumping
linux-firmware as well.
Users can purge unwanted versions from a post processing script if
target space is too constrained.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sun, 24 Apr 2016 21:34:51 +0000 (23:34 +0200)]
linux-firmware: allow LINUX_FIRMWARE_FILES to contain wildcards
This commit will allow the LINUX_FIRMWARE_FILES variable to contain
wildcards, which will simplify the handling of firmware that are
available in numerous revisions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 19:51:45 +0000 (21:51 +0200)]
package/glibc: add upstream patch to fix glibc-2.23 compile bug with gcc6
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 19:50:19 +0000 (21:50 +0200)]
package/glibc: Add security patches to fix CVE-2016-3075
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Sun, 24 Apr 2016 18:29:38 +0000 (20:29 +0200)]
package/yajl: fix build when explicit link with libm is needed
This change adds another fix to the yajl build-system code.
This patch checks for isnan function in libc, and if not, it makes sure
libm is passed to the linker flags.
This change fixes build failure looking like:
make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/yajl-2.1.0'
[ 81%] Building C object example/CMakeFiles/parse_config.dir/parse_config.c.o
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isnan'
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isinf'
collect2: error: ld returned 1 exit status
make[3]: *** [verify/json_verify] Error 1
Fixes:
http://autobuild.buildroot.org/results/312/
31268e4d20aa34bb90c09aa771b1923f979578ab/
and many others
Cc: Benoît Mauduit <bmauduit@beneth.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 17:24:05 +0000 (19:24 +0200)]
package/kodi-addon-xvdr: mark as deprecated
According to the github project page:
https://github.com/pipelka/xbmc-addon-xvdr
this package is discontinued.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: add a reason for the deprecation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 15:25:52 +0000 (17:25 +0200)]
package/jsoncpp: add hash
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ignacy Gawędzki [Thu, 31 Mar 2016 07:34:43 +0000 (09:34 +0200)]
busybox: Support option 119 in udhcpc default script.
* package/busybox/udhcpc.script: Use $search instead of $domain if
that is defined.
Note that for this to work, not only has CONFIG_FEATURE_UDHCP_RFC3397
be enabled in Busybox' configuration but also the option has to be
requested using the "-O search" command-line option (one can set it in
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS, for instance).
[Peter: add comment with reference to rfc3359/option 119 for clarity]
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pieter Smith [Sun, 24 Apr 2016 09:18:45 +0000 (11:18 +0200)]
barebox: extract package name argument
No functional changes: Extracts an argument to the inner-barebox-package
function to automatically determine the uppercase package name. This is needed
to support a 2nd config build. This results in the following renaming:
'BAREBOX' -> '$(1)'
All barebox packages are meant to be built from the same sources, so related
KConfig variables (origin, version and patch directory) are not extracted.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pieter Smith [Sun, 24 Apr 2016 09:18:44 +0000 (11:18 +0200)]
barebox: introduce barebox-package function
No functional changes: Introduces a barebox-package function towards
re-use by a 2nd config build.
Because the function is meant to be called from within a $(eval), all
instances of '$' has to be escaped. I.e. rename '$' -> '$$'.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pieter Smith [Sun, 24 Apr 2016 09:18:43 +0000 (11:18 +0200)]
barebox: support multi-image-build image selection
Support optional selection of the built image filename in a
multi-image barebox build. This makes it possible to specify which
image to pick in a multi-image barebox config such as the
am335x_defconfig.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
[Thomas:
- remove default "", since this is the default for string options
- rename the prompt from "Barebox image filename" to "Image filename"
- slightly improve the Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 12:23:04 +0000 (14:23 +0200)]
package/kodi: bump version to 16.1-Jarvis
Removed patch 0005, applied upstream, and renumbered the remaining
patches.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Angelo Compagnucci [Sun, 24 Apr 2016 14:15:48 +0000 (16:15 +0200)]
package/mono: bump to version 4.2.3.4
This patch bump mono version to the latest release 4.2.3.4.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sun, 24 Apr 2016 13:56:40 +0000 (15:56 +0200)]
package/jsoncpp: bump version to 1.7.2
Removed patches applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log