package/softether: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zyre: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zlog: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vim: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/socketcand: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/open-plc-utils: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libshairplay: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/janus-gateway: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/inotify-tools: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glmark2: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/can-utils: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/avrdude: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-serial: fix Python 2.7.x related compilation error

aio.py is an experimental module, that is compatible with
Python 3 only, so remove it for Python 2 environment or it
will cause compilation errors.

Fixes:
http://autobuild.buildroot.org/results/f26/f26351da925d6ef3adea8053dc7fc24061554daf/

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in: add BR2_HOST_GCC_AT_LEAST_6

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/minnowboard_max: bump kernel to 4.6.1

Also, rebase kernel config and adapt kernel command line in grub config file
to follow mmc numbering change.

[Peter: drop now unused linux-4.4.config]
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Binutils: ARC: Fix build failures if makeinfo is missing

Build failed when "makeinfo" was missing on the build host.
This was happening because "makeinfo" is required to build .info targets
and make exited with error. The issue hadn't appeared before as there was
prebuilt documentation in ARC binutils tarballs, so no attempts had been
made to build docs.

Missing "makeinfo" only stops us from building docs
("missing" script already throws a warning on that regard).
Let's continue to build other targets.

Now exit code of the script called "missing" is checked.
The value 127 means that "makeinfo" is not available on the build host.

So when such value occurs, 0 is returned to the top level makefile.
Documentation is not being built but further build of binutils continues.

Fixes http://autobuild.buildroot.net/results/55c/55cd09a559016f4f252f0e4c27313b9806135cf4//

Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/janus-gateway: Changed WebSockets library from libwebsock to libwebsockets

For details see
https://github.com/meetecho/janus-gateway/commit/f500ae8ea492109e7e8d52c669e1a7d1a5021537

Fixes
http://autobuild.buildroot.net/results/e46/e468792af4aadbc6c9fce828a9d423e35c303b90/
http://autobuild.buildroot.net/results/88f/88f2cdbe2aad2d2476372dd4d559edf2bf16d5b1/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zyre: update license

The project switched to MPLv2.0:
https://github.com/zeromq/zyre/issues/327

Fixes
http://autobuild.buildroot.net/results/88f/88fa0b150ad83e42625666cbffdf95ee178015cb/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/gnuconfig: bump version to 2016-05-15

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-cryptography: bump to version 1.3.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nginx: security bump to version 1.10.1

Fixes:
CVE-2016-4450 - NULL pointer dereference while writing client request
body.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openpowerlink: enable openpowerlink PCIe driver support

Also, disable error=date-time for kernel >= 3.14 and fix musl build.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openpowerlink: bump to v2.4.0

Remove upstream patches and rebase all remaining patches.

Disable PCIe MN library by default, it will be added in a follow up patch.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wiringpi: uses fork(), needs mmu

Fixes
http://autobuild.buildroot.net/results/c60/c6013c214674f9802309d8cd770d3da2f751674d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: add microblaze support

Latest uClibc-ng 1.0.15 release fixed open issues with
microblaze shared library and linuxthreads support.
gcc 4.9.3 and gcc 5.3.0 require a small patch.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lvm2: bump to version 2.02.155

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cryptsetup: bump to version 1.7.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: apply modesettings patch for 1.18.3 only

We currently have two choices for the server's version (1.18.3, and 1.14.7)
but the following patch will only apply for versions >= 1.17.2.

If 1.14.7 is selected the build will fail with the following error:

Applying 0001-modesettings-needs-dri2.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 2036

So move this patch to an appropriate version folder in the package's
directory. It should be good enough until this package provides more
versions >= 1.17.2.

Signed-off-by: Stanislas Bach <sbach@0g.re>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/hidapi: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/open-plc-utils: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php-ssh2: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php-geoip: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/turbolua: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zyre: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/czmq: bump version

Needed for zyre bump:
https://github.com/zeromq/zyre/issues/442#issuecomment-189127583

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/odhcp6c: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sconeserver: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/v4l2grab: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zxing-cpp: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zlog: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vim: bump version to v7.4.1902

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/socketcand: bump version

Removed patch applied upstream:
https://github.com/dschanoeh/socketcand/commit/bdb3cd081a694f8f6924e399d944e32c1578235c

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/softether: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vpnc: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libshairplay: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/janus-gateway: bump version to v0.1.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minizip: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/iputils: bump version

tracepath and tracepath6 were merged recently:
https://github.com/iputils/iputils/pull/48

Therefore we do not need to install tracepath6 anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/inotify-tools: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gr-osmosdr: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gmrender-resurrect: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glmark2: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/filemq: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/can-utils: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/avrdude: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/axfsutils: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nodejs: Update npm to use NODEJS_CONF_OPTS

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Update openssl to use NODEJS_CONF_OPTS

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Update icu to use NODEJS_CONF_OPTS

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Add NODEJS_CONF_OPTS

Most packages in buildroot pass a FOO_CONF_OPTS variable into the
configure script.  Transition nodejs to follow this convention.

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wiringpi: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/arm_juno: adding CMA support to the kernel

This patch adds CMA to the juno's default kernel config that is in
board/arm/juno. This is critical if the user decides to config video
resolution to 1920x1080.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/pc_x86_64_{bios, efi}_defconfig: new samples

Add two new sample defconfigs oriented towards real PC targets.

It adds two variants for BIOS and EFI boot strategy.

On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.

It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.

Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.

In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.

Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/omxplayer: new package

OMXplayer uses openMAX on the RPi to play videos with hardware
acceleration.

Compared to using a gstreamer pipe, OMXplayer uses a complete
"tunnel-mode", in which the video is piped (after demuxing) into the
hardware, all the way down to the display, whereas gstreamer composes
the video using the eglgles sink, which uses mem-to-mem copies.

So, when playing a locally-stored 1080p video, OMXplayer averages 20%
(with peaks up to ~30%, depending on the complexity of the video) CPU,
while gstreamer bursts up to 40+% when playing 720p and totally chokes
on a 1080p video; all on an non-overclocked RPi-1.

Note that we have to depend on rpi-userland. rpi-userland is a GLES/EGL
provider, so it can't be selected (as all providers of a virtual package
can't).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5connectivity: add bluez5_utils option for QtBluetooth submodule

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas: simplify ifneq conditions in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5connectivity: add QtNfc submodule

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
 - remove useless 'depends on' on toolchain features, since we now
   depend on bluez_utils/neard
 - remove the QT5CONNECTIVITY_INSTALL_TARGET_QMLS variable, and directly
   use QT5CONNECTIVITY_INSTALL_TARGET_BLUETOOTH_QMLS and
   QT5CONNECTIVITY_INSTALL_TARGET_NFC_QMLS in
   QT5CONNECTIVITY_INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vpnc: add patches to fix build with the musl C library

This commit adds three patches that are needed to fix build issues on
musl:

 - <error.h> not available on musl
 - structure redefinitions due to direct inclusion of kernel headers
 - missing <sys/ttydefaults.h> inclusion

Patches have been submitted upstream:
http://lists.unix-ag.uni-kl.de/pipermail/vpnc-devel/2016-June/004186.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vpnc: bump to newer upstream version

While the official upstream has not published any new tarball, they
have continued to update their Subversion repository with additional
changes. This commit therefore updates the vpnc package to a newer
version, using the Github repository that replicates the original
Subversion repository.

Since the update required some updates to the patches, we took this
opportunity to split them in more fine-grained changes, and document
them more properly. Consequently:

 - The patch 0001 that fixes the Makefile gets split into 3 patches,
   0001, 0002 and 0003, each for one specific issue.

 - Patch 0002 to disable building the manpages gets changed into a
   solution that is potentially upstreamable, and is now patch 0004.

 - A new patch 0005 is added to specify a custom libgcrypt-config
   path, since this tool is now used to know how to link with
   libgcrypt.

 - The SUSv3 function removal patch is now patch 0006, and gains a
   better commit log.

Also, this vpnc version now depends on gnutls, which basically is a
better replacement for OpenSSL, whose support was not enabled by
default due to licensing issues (vpnc is under the GPL, which isn't
compatible with the OpenSSL license).

Patches have been submitted upstream:
http://lists.unix-ag.uni-kl.de/pipermail/vpnc-devel/2016-June/004186.html

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: Add support for V4L2 probed devices

The V4L2 module of gst-plugins-good provides an extra option to allow
probing for extra devices at plugin load time. This will enable features
such as video conversion using the V4L2 M2M api

Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 6.2.1

See https://nodejs.org/en/blog/release/v6.2.1/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: add icu support

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ficl: add missing -fPIC

fix http://autobuild.buildroot.net/results/dec/dec926ad7d7880c385835ba7b380dd41fd7f3762/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webp: minor improvements

Following commit e47638f8dca29b0d9b729edbaeaa11a08f9957fa, this commit
makes a few additional cosmetic improvements to the webp package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: fix build failure of subst.c

subst.c is built for the host, but uses defines calculated by the
configure script using the cross-compiler. By passing BUILD_CFLAGS, we
help subst.c include the proper header files, and therefore avoid the
build failure.

Fixes:

  http://autobuild.buildroot.org/results/2a66280800b8aa16fee2701b3f345aa24bb13c35/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webp: allow to enable demux

Signed-off-by: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-flask: bump to version 0.11

Change download location and rework dependencies, i.e.
select Python's zlib support and python-click package
and remove unneeded build-time dependencies.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-werkzeug: bump to version 0.11.10

Change download location.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-psutil: bump to version 4.2.0

Change download location.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-serial: bump to version 3.1

Change download location.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ser2net: bump to version 2.10.1

Remove upstreamed patch.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx53loco: Fix post-image.sh permission

Fix post-image.sh permission to avoid the following error:

>>>   Executing post-image script board/freescale/imx53loco/post-image.sh
/bin/bash: board/freescale/imx53loco/post-image.sh: Permission denied

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mongrel2: allow to build for sparc

With uClibc-ng 1.0.15 sparc support got context functions.
Tested with qemu-system-sparc.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsigsegv: enable for sparc

Now that uClibc-ng 1.0.15 is in use, we can reenable
this package as context functions are available.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntp: security bump to version 4.2.8p8

Fixes:
CVE-2016-4957 - Crypto-NAK crash
CVE-2016-4953 - Bad authentication demobilizes ephemeral associations
CVE-2016-4954 - Processing spoofed server packets
CVE-2016-4955 - Autokey association reset
CVE-2016-4956 - Broadcast interleave

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iw: bump to version 4.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: drop autoreconf

It's unnecessary as pointed by Thomas P.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{18, 14, 12}.x and 4.{1, 4, 5}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/make: fix hash type (md5 instead of sha1)

Fixes:
  http://autobuild.buildroot.net/results/133cdeaa0644405568c3e8fc003d73c4570fbc82/
  http://autobuild.buildroot.net/results/e162f46458f4948c75550d47710bee92f1602273/
  http://autobuild.buildroot.net/results/7ca74c9ea36321e1940ee2707af5745b7d4498d2/

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: Bump to 4.6.1 kernel

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: bump 7.11.x branch to 7.11.1

This commit bumps our gdb 7.11 version to the latest 7.11.1 release. See
https://sourceware.org/ml/gdb/2016-06/msg00000.html for the release
announcement.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qlibc: unbreak legal-info after version bump

Fixes:
http://autobuild.buildroot.org/results/12f/12f89408935143050a27d92f4b6796d50da07da1/

The recent version bump to v2.4.1 forgot to update the name of the license
file which has been renamed upstream (and reindented/copyright year updated,
but is otherwise identical).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/go: Enable MIPS support

Enable go language support for mips64 and mips64el (mips64le), which
were added in go-1.6.2.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qlibc: bump version to 2.4.1

This patch depends on http://patchwork.ozlabs.org/patch/624729/

Rebased 0002-obey-destdir.patch using upstream commit.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tinc: bump version to 1.0.28

This patch can be applied after the release of buildroot 2016.05.

Removed 0001-musl.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libconfuse: bump to version 3.0

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: Bump default to version 4.6.1

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update to 1.0.15

The Linuxthreads support got reorganized.
LT.new is removed, LT.old is the default for
Linuxthreads.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dtv-scan-tables: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imagemagick: bump version to 6.9.4-6

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>