i965/vec4: Only zero out unused message components when there are any.

Otherwise, coordinates with four components would result in a MOV
with a destination writemask that has no channels enabled:

mov(8) g115<1>.F 0D { align16 WE_normal NoDDChk 1Q };

At best, this is stupid: we emit code that shouldn't do anything.
Worse, it apparently causes GPU hangs (observable with Chris's
textureGather test on CubeArrays.)

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Cc: mesa-stable@lists.freedesktop.org

i965/vec4: Simplify the computation of coord_mask and zero_mask.

We can easily compute these without loops, resulting in simpler and
shorter code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Suggested-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

docs: Clean up autoconf.html.

Remove long dead options and clarify some things.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69148
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Properly set the fog scale (gl_Fog.scale) to +INF when fog start and end are equal.

This was originally introduced by commit
ba47aabc9868b410cdfe3bc8b6d25a44a598cba2, but unfortunately the commit message
doesn't go into much detail about why +INF would be a problem here.

A similar issue exists for STATE_FOG_PARAMS_OPTIMIZED, but allowing infinity
there would potentially introduce NaNs where they shouldn't exist, depending
on the values of fog end and the fog coord. Since STATE_FOG_PARAMS_OPTIMIZED
is only used for fixed function (including ARB_fragment_program with fog
option), and the calculation there probably isn't very stable to begin with
when fog start and end are close together, it seems best to just leave it
alone.

This fixes piglit glsl-fs-fogscale, and a couple of Wine D3D tests. No piglit
regressions on Cayman.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Use correct enum conversion function.

Fixes "Mixing enum types" defect reported by Coverity.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Ensure gl_sync_object is fully initialized.

278372b47e4db8a022d57f60302eec74819e9341 added the uninitialized pointer
field gl_sync_object:Label. A free of this pointer, added in commit
6d8dd59cf53d2f47b817d79204a52bb3a46e8c77, resulted in a crash.

This patch fixes piglit ARB_sync regressions with swrast introduced by
6d8dd59cf53d2f47b817d79204a52bb3a46e8c77.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

radeonsi: Add parentheses around '|' operands.

Fixes GCC parentheses warning.

r600_texture.c: In function 'si_texture_create':
r600_texture.c:518:20: warning: suggest parentheses around arithmetic in operand of '|' [-Wparentheses]
      !(templ->bind & PIPE_BIND_CURSOR | PIPE_BIND_LINEAR)) {
                    ^

Fixes "Wrong operator used" defect reported by Coverity.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

util: Fix unmatched parenthesis.

Fixes MSVC build error introduced with commit
923d3467147dd301d94ed3e6b41295fb2bcd6f47.

src\gallium\auxiliary\util\u_cpu_detect.c(286) : fatal error C1012: unmatched parenthesis : missing '('

Signed-off-by: Vinson Lee <vlee@freedesktop.org>

util: don't use _fxsave() with MSVC 2010 or older

And update _MSC_VER comments in p_config.h

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

glsl: Add missing va_end in builtin_builder::add_function.

Fixes "Missing varargs init or cleanup" defect reported by Coverity.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: Initialize builtin_builder member variables.

Fixes "Uninitialized pointer field" defect reported by Coverity.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: fix variadic macro for MSVC

MSVC doesn't accept the rest... syntax.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: remove struct keyword from ir_variable declarations

To silence MSVC warnings.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

Revert "i965/vec4: Only zero out unused message components when there are any."

This reverts commit 6c3db2167c64ecf2366862f15f8e2d4a91f1028c, which I
accidentally pushed along with other code.  A better version of the fix
will be committed later.

i965: Allow immediates to be folded into logical and shift instructions.

These instructions will be used with immediate arguments in the upcoming
ldexp lowering pass and frexp implementation.

v2: Add vec4 support as well.
Reviewed-by: Paul Berry <stereotype441@gmail.com>

i965: Enable MESA_shader_integer_mix.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Implement MESA_shader_integer_mix extension.

Because why doesn't GLSL allow you to do this already?

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Use conditional-select in mix().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Add support for ir_triop_csel.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Add conditional-select IR.

It's a ?: that operates per-component on vectors. Will be used in
upcoming lowering pass for ldexp and the implementation of frexp.

 csel(selector, a, b):
   per-component result = selector ? a : b

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Rename ir_function_signature::builtin_info to builtin_avail.

builtin_info was originally going to be a structure containing a bunch
of information, but after various rewrites, it turned into a boolean
availability predicate.

builtin_avail is a better name than builtin_info, since it doesn't
store any information other than availability.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

build: Delete cross-compiling macros.

Now that builtin_compiler is gone, nothing uses these.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Paul Berry <stereotype441@gmail.com>

glsl: Add missing type inference for ir_binop_bfm.

Matt noticed that this was missing.  Nothing uses this currently.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Delete old built-in function generation code.

None of this is used anymore.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Paul Berry <stereotype441@gmail.com>

glsl: Remove builtin_compiler from the build system.

We don't actually use anything from builtin_function.cpp, so we don't
need to generate it anymore.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Paul Berry <stereotype441@gmail.com>

glsl: Switch to the new built-in function module.

All built-ins are now handled by the new code; the old system is dead.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Write a new built-in function module.

This creates a new replacement for the existing built-in function code.
The new module lives in builtin_functions.cpp (not builtin_function.cpp)
and exists in parallel with the existing system.  It isn't used yet.

The new built-in function code takes a significantly different approach:

Instead of implementing built-ins via printed IR, build time scripts,
and run time parsing, we now implement them directly in C++, using
ir_builder.  This translates to faster load times, and a much less
complex build system.

It also takes a different approach to built-in availability: each
signature now stores a boolean predicate, which makes it easy to
construct arbitrary expressions based on _mesa_glsl_parse_state's
fields.  This is much more flexible than the old system, and also
easier to use.

Built-ins are also now stored in a single gl_shader object, rather
than being spread out across a number of shaders that need to be linked.
When searching for a matching prototype, we simply consult the
availability predicate.  This also simplifies the code.

v2: Incorporate Matt Turner's feedback: use the new fma() function rather
    than expr().  Don't expose textureQueryLOD() in GLSL 4.00 (since it
    was renamed to textureQueryLod()).  Also correct some #undefs.
v3: Incorporate Paul Berry's feedback: rename legacy to compatibility;
    add comments to explain a few things; fix uvec availability; include
    shaderobj.h instead of repeating the _mesa_new_shader prototype.
v4: Fix lack of TEX_PROJECT on textureProjGrad[Offset] (caught by oglc).
    Add an out_var convenience function (more feedback by Matt Turner).
v5: Rework availability predicates for Lod functions.  They were broken.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Enthusiastically-acked-by: Paul Berry <stereotype441@gmail.com>

glsl: Add optional parameters to the ir_factory constructor.

Each ir_factory needs an instruction list and memory context in order to
be useful.  Rather than creating an object and manually assigning these,
we can just use optional parameters in the constructor.

This makes it possible to create a ready-to-use factory in one line:

   ir_factory body(&sig->body, mem_ctx);

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add IR builder shortcuts for a bunch of random opcodes.

Adding new convenience emitters makes it easier to generate IR involving
these opcodes.

bitfield_insert is particularly useful, since there is no expr() for
quadops.

v2: Add fma() and rename lrp() operands to x/y/a to match the GLSL
    specification (suggested by Matt Turner).  Fix whitespace issues.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Expose IR builder support for arbitrary swizzling.

IR builder already offers a lot of swizzling functions, such as
swizzle_xxxx, swizzle_z, or swizzle_for_size.

The swizzle_xxxx style is convenient if you statically know which
components you want.  swizzle_for_size is great if you want to select
the first few components.  However, if you want to select components
based on, say, a loop counter, none of those are sufficient.

IR builder actually already had support for arbitrary swizzling, but
didn't expose it.  This patch exposes that API.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add a new ir_builder::dotlike() function.

dotlike() uses ir_binop_mul for scalars, and ir_binop_dot for vectors.

When generating built-in functions, we often want to use regular
multiply for scalar signatures, and dot() for vector signatures.
ir_binop_dot only works on vectors, so we have to switch opcodes,
even if the code is otherwise identical.  dotlike() makes this easy.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add IR builder support for generating return statements.

We use "ret" as the function name since "return" is a C++ keyword, and
"ir_return" is already a class name.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add IR builder support for conditional assignments.

This adds two new signatures:

   assign(lhs, rhs, condition, writemask);
   assign(lhs, rhs, condition);

All the other existing APIs still exist.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add IR builder support for triops.

Now that we have the ir_expression constructor that does type inference,
this is trivial to do.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add an ir_expression triop constructor with type inference.

We already have ir_expression constructors for unary and binary
operations, which automatically infer the type based on the opcode and
operand types.

These are convenient and also required for ir_builder support.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add missing type inference support for ARB_gpu_shader5 unops.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Initialize lod_info in the ir_texture constructor.

This isn't strictly necessary, since creators of ir_texture objects
should set LOD when relevant.  However, it's nice to have a NULL pointer
in case they forget.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Skip unavailable built-ins when printing out similar candidates.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Skip unavailable built-ins when matching signatures.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Pass _mesa_glsl_parse_state into matching_signature and such.

During compilation, we'll use this to determine built-in availability.
The plan is to have a single shader containing every built-in in every
version of the language, but filter out the ones that aren't actually
available to the shader being compiled.

At link time, we don't actually need this filtering capability: we've
already imported prototypes for every built-in that the shader actually
calls, and they're flagged as is_builtin().  The linker doesn't import
any additional prototypes, so it won't pull in any unavailable
built-ins.  When resolving prototypes to function definitions, the
linker ensures the values of is_builtin() match, which means that a
shader can't trick the linker into importing the body of an unavailable
built-in by defining a suspiciously similar prototype.

In other words, during linking, we can just pass in NULL.  It will work
out fine.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Add a method to tell whether a built-in is available.

We can simply call the stored predicate function.  If state is NULL,
just report that the function is available.

v2: Add a comment (requested by Paul Berry).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Mark _mesa_glsl_parse_state::is_version() as const.

This promises the method won't modify the contents of the object.
This allows us to call it even with a const pointer to the state.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Convert ir_function_signature::is_builtin to a method.

A signature is a built-in if and only if builtin_info != NULL, so we
don't actually need a separate flag bit.  Making a boolean-valued
method allows existing code to ask the same question while not worrying
about the internal representation.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Store a predicate for whether a built-in signature is available.

For the upcoming built-in function rewrite, we'll need to be able to
answer "Is this built-in function signature available?".

This is actually a somewhat complex question, since it depends on the
language version, GLSL vs. GLSL ES, enabled extensions, and the current
shader stage.

Storing such a set of constraints in a structure would be painful, so
instead we store a function pointer.  When creating a signature, we
simply point to a predicate that inspects _mesa_glsl_parse_state and
answers whether the signature is available in the current shader.

Unfortunately, IR reader doesn't actually know when built-in functions
are available, so this patch makes it lie and say that they're always
present.  This allows us to hook up the new functionality; it just won't
be useful until real data is populated.  In the meantime, the existing
profile mechanism ensures built-ins are available in the right places.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

i965/vec4: Only zero out unused message components when there are any.

Otherwise, coordinates with four components would result in a MOV
with a destination writemask that has no channels enabled:

mov(8) g115<1>.F 0D { align16 WE_normal NoDDChk 1Q };

At best, this is stupid: we emit code that shouldn't do anything.
Worse, it apparently causes GPU hangs (observable with Chris's
textureGather test on CubeArrays.)

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Chris Forbes <chrisf@ijw.co.nz>
Cc: mesa-stable@lists.freedesktop.org

vbo: Implement new gs prim types in vbo_count_tessellated_primitives.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Enable AMD_seamless_cubemap_per_texture

The change is very small.  Do seamless filtering if either the context
enable is set or the sampler enable is set.

The AMD_seamless_cubemap_per_texture says:

    "If TEXTURE_CUBE_MAP_SEAMLESS_ARB is emabled (sic) globally or the
    value of the texture's TEXTURE_CUBE_MAP_SEAMLESS_ARB parameter is
    TRUE, seamless cube map sampling is enabled..."

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Always use seamless cubemap filtering in GLES3

Appendix F.2 of the OpenGL ES 3.0.0 spec says:

    "OpenGL ES 3.0 requires that all cube map filtering be
    seamless. OpenGL ES 2.0 specified that a single cube map face be
    selected and used for filtering."

Setting the field only in the context will work fine with sampler
objects (and drivers that support AMD_seamless_cubemap_per_texture)
because seamless filtering is used if *either* the context or the
sampler enable it:

    "If TEXTURE_CUBE_MAP_SEAMLESS_ARB is emabled (sic) globally or the
    value of the texture's TEXTURE_CUBE_MAP_SEAMLESS_ARB parameter is
    TRUE, seamless cube map sampling is enabled..."

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reported-by: Maxence Le Dore <maxence.ledore@gmail.com>
Thanked-by: Maxence Le Dore <maxence.ledore@gmail.com>

mesa: Don't allow glSamplerParameteriv(GL_TEXTURE_CUBE_MAP_SEAMLESS) in ES

There is no GL_TEXTURE_CUBE_MAP_SEAMLESS in any version of OpenGL ES or
in any extension that applies to OpenGL ES.  The same error check
already occurs for glTexParameteri.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: Maxence Le Dore <maxence.ledore@gmail.com>

docs: initial 9.3 release notes file

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Paul Berry <stereotype441@gmail.com>

ilo: preliminary GEN 7.5 support

This is based on grepping for brw->is_haswell in i965 to see how GEN 7.5
differs from GEN 7.  Slightly tested with Xonotic and some Mesa demos.

radeonsi: add berlin pci ids

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

r600g: remove DMA padding

This is now handled in the winsys.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/winsys: pad IBs to a multiple of 8 DWs

This aligns the gfx, compute, and dma IBs to 8 DW boundries.
This aligns the the IB to the fetch size of the CP for optimal
performance. Additionally, r6xx hardware requires at least 4
DW alignment to avoid a hw bug.  This also aligns the DMA
IBs to 8 DW which is required for the DMA engine.  This
alignment is already handled in the gallium driver, but that
patch can be removed now that it's done in the winsys.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: "9.2" <mesa-stable@lists.freedesktop.org>
CC: "9.1" <mesa-stable@lists.freedesktop.org>

gallium, intel: Implements new __DRI_IMAGE_USE_LINEAR and PIPE_BIND_LINEAR flags to enforce no tiling.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

mesa: Ensure gl_query_object is fully initialized.

278372b47e4db8a022d57f60302eec74819e9341 added the uninitialized pointer
field gl_query_object:Label. A free of this pointer resulted in a crash.

This patch fixes piglit regressions with swrast introduced by
6d8dd59cf53d2f47b817d79204a52bb3a46e8c77.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69047
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallivm: support indirect registers on both dimensions

We support indirect addressing only on the vertex index, but some
shaders also use indirect addressing on attributes. This patch
adds support for indirect addressing on both dimensions inside
gs arrays.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

i915g: Document fall-through switch

Fixes warning reported by Coverity.

i915g: Handle i915->batch == NULL correctly in flush

Fixes warning reported by Coverity.

i915g: Remove useless comparison

Fixes "Macro compares unsigned to 0" defect reported by Coverity.

i915g: Fix initial array index

Fixes "Out-of-bounds read" defect reported by Coverity.

mesa: add GL_KHR_debug functions to dispatch_sanity.cpp

Fixes 'make check' failures.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

docs: Add some notes on submitting patches

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

r600g/compute: Fix bug in compute memory pool

When adding a new buffer to the beginning of the memory pool, we were
accidentally deleting the buffer that was first in the buffer list.
This was caused by a bug in the memory pool's linked list
implementation.

r600g/compute: Don't flush the cs in pipe_context::launch_grid()

This is the state tracker's responsibility.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Remove never used DPA2 opcode.

DPA2 is listed in the "Defeatured Instructions" section of the
965 PRM, Volume 4:

"The following instructions are removed from Gen4 implementation mainly
 due to implementation cost/schedule reasons.  They are candidates for
 future generations."

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove never used RSR and RSL opcodes.

RSR and RSL are listed in the "Defeatured Instructions" section of the
965 PRM, Volume 4:

"The following instructions are removed from Gen4 implementation mainly
 due to implementation cost/schedule reasons.  They are candidates for
 future generations."

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: propagate max_array_access through function calls

Fixes a bug where if an uniform array is passed to a function the accesses
to the array are not propagated so later all but the first vector of the
uniform array are removed in parcel_out_uniform_storage resulting in
broken shaders and out of bounds access to arrays in
brw::vec4_visitor::pack_uniform_registers.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dominik Behr <dbehr@chromium.org>

nv30: fix inconsistent setting of push->user_priv

It's set to &nv30->bufctx everywhere else.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>

i965/gen7.5: Fix lower bound on number of VS URB entries.

Haswell GT2 and GT3 require the number of vertex shader URB entries to
be at least 64, not 32.

At the moment, we always meet this requirement automatically, because
in the absence of a geometry shader, we assign all available URB space
to the vertex shader.  But when we turn on support for geometry
shaders, this lower limit will become important.

Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965/vs: Move vs-specific code out of brw_vec4_visitor.cpp.

This patch creates a new file brw_vec4_vs_visitor.cpp, to contain code
that is specific to the vertex shader.  Now the organization of vertex
shader and geometry shader visitor code is symmetric: vs-specific code
is in brw_vec4_vs_visitor.cpp, gs-specific code is in
brw_vec4_gs_visitor.cpp, and code shared between vs and gs is in
brw_vec4_visitor.cpp.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Make with_writemask() non-static.

This will allow it to be shared between brw_vec4_visitor.cpp and
brw_vec4_vs_visitor.cpp (which will be created in the next patch).

Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vs: Move vs-specific code out of brw_vec4.h.

Now brw_vec4.h contains only code that is shared between the vertex
and geometry shaders.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gs: Don't assign gl_Layer its own slot in the VUE map.

Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i915g: Implement writemask fixup

The fixup code emulates non-BGRA render targets by adding an
extra instruction at the end of fragment shaders to swizzle the
output. To do this, we also swizzle the blend function. However
an oversight until now was that the writemask wasn't getting
swizzled. This patch fixes that which fixes a bunch of piglit
tests.

i915g: Stop calling draw_prepare_shader_outputs

It's not useful on i915g since we don't support primid. Fixes
piglit point tests on i915g.

glx: Initialize OpenGL version to 1.0

The old code in dri2_glx suffered from a typographical error that caused
the default version to be 2.1 instead of 1.2 (minimum required by the
Linux OpenGL ABI).  drisw_glx had a similar error resulting in a default
version of 0.1.

Some driver/card combinations (r200/RV280, i915/915G) don't support
OpenGL 2.1.  These create in some corner cases an indirect context
instead of a direct context when calling glXCreateContextAttribsARB().
This happens because of a bad default value.  To avoid this, just used
the default value specified by the GLX_ARB_create_context specification:

    "The default values for GLX_CONTEXT_MAJOR_VERSION_ARB and
    GLX_CONTEXT_MINOR_VERSION_ARB are 1 and 0 respectively. In this
    case, implementations will typically return the most recent version
    of OpenGL they support which is backwards compatible with OpenGL 1.0
    (e.g. 3.0, 3.1 + GL_ARB_compatibility, or 3.2 compatibility
    profile)"

Refactor all the default value setting to dri2_convert_glx_attribs, and
make sure the correct defaults are set in that one place.

Signed-off-by: Rico Schüller <kgbricola@web.de>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla http://bugs.winehq.org/show_bug.cgi?id=34238
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>

i915g: Add more optimizations

This patch adds liveness analysis to i915g and a couple
optimizations which benefit from it. One interesting
optimization turns (fake) indirect texture accesses into direct
texture accesses (the i915 supports a maximum of 4 indirect
texture accesses). Among other things this fixes a bunch of
piglit tests.

glsl: Remove unused prog parameter from tfeedback_decl::init

It looks like commit 53febac removed the last user of that parameter.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Validate qualifiers on VS color outputs with FS color inputs

The vertex shader color outputs (gl_FrontColor, gl_BackColor,
gl_FrontSecondaryColor, and gl_BackSecondaryColor) don't have the same
names as the matching fragment shader color inputs (gl_Color and
gl_SecondaryColor).  As a result, the qualifiers on them were not being
properly cross validated.

Full spec compliance required ir_variable::used and
ir_variable::assigned be set properly.  Without the preceeding patch,
which fixes the ::clone method to copy them, this will not be the case.

Fixes all of the previously failing piglit
spec/glsl-1.30/linker/interpolation-qualifiers tests.

v2: Update callers of cross_validate_types_and_qualifiers and
cross_validate_front_and_back_color.  The function signature changed in
v2 of a previous patch.  Suggested by Paul.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47755

glsl: Copy ir_variable::assigned and ir_variable::used fields in ::clone method

Nothing currently relies on this, but one of the next patches will.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Refactor a bunch of the code out of cross_validate_outputs_to_inputs

The new function, cross_validate_types_and_qualifiers, will have
multiple callers from this file in future commits.

v2: Don't pass the names of the producer / consumer stages to
cross_validate_types_and_qualifiers.  Instead, pass the types and get
the names only in the error paths.  Suggested by Paul.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glsl: Reallow precision qualifiers on structure members

Changes to the grammar for GL_ARB_shading_language_420pack (commit
6eec502) moved precision qualifiers out of the type_specifier production
chain.  This caused declarations such as:

    struct S {
        lowp float f;
    };

to generate parse errors.  Section 4.1.8 (Structures) of both the GLSL
ES 1.00 spec and GLSL 1.30 specs says:

        "Member declarators may contain precision qualifiers, but may not
        contain any other qualifiers."

So, it sure seems like we shouldn't generate a parse error. :)

Instead of type_specifier, use fully_specified_type in struct members.
However, fully_specified_type allows a lot of other qualifiers that are
not allowed on structure members, so expeclitly disallow them.

Note, this makes struct_declaration look an awful lot like
member_declaration (used for interface blocks).  We may want to
(somehow) unify these rules to reduce code duplication at some point.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68753
Reported-by: Aras Pranckevicius <aras@unity3d.com>
Cc: Aras Pranckevicius <aras@unity3d.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>

mesa: Setup remaining infrastucture and enable KHR_debug

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

glapi: Setup autogeneration infrastructure for KHR_debug

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Remap debug type and severity

Remap any type or severity exclusive to KHR_debug to
something suitable for ARB_debug_output

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Implement GL_DEBUG_OUTPUT

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Update builds scripts to build object labels

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Implement KHR_debug ObjectLabel functions

V3: make sure to add null terminator when setting label,
generate error when the client specifies an explicit
length that exceeds MAX_LABEL_LENGTH, set label pointer
to NULL when freed, and output correct length in
MAX_LABEL_LENGTH error message.

V2: fixed indentation of comment

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: make _mesa_validate_sync() non-static

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: free object labels when deleting

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: add debug Label field to several data structures

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: make _mesa_lookup_list() non-static

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: make _mesa_lookup_arrayobj() non-static

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Implement glPushDebugGroup and glPopDebugGroup

V4: fixes _mesa_error() compiler warnings (BrianP).

V3: removed C++ style comment

V2: fixed spelling typo in comment

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Add a clone function to mesa hash

V2: const qualify table parameter

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Share common code between ARB_debug_output and KHR_debug functions

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Add some constants and state variables for KHR_debug functions

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Rename gl_context::swtnl_im to vbo_context; use proper type.

The main GL context's swtnl_im field is the VBO module's vbo_context
structure.  Using the name "swtnl" in the name is confusing since
some drivers use hardware texturing and lighting, but still rely on the
VBO module for drawing.

v2: Forward declare the type and use that instead of void *
    (suggested by Eric Anholt).
v3: Remove unnecessary cast (pointed out by by Topi Pohjolainen).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

i965: Rename "prim" parameter to "prims" where it's an array.

Some drawing functions take a single _mesa_prim object, while others
take an array of primitives.  Both kinds of functions used a parameter
called "prim" (the singular form), which was confusing.

Using the plural form, "prims," clearly communicates that the parameter
is an array of primitives.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Berry <stereotype441@gmail.com>