Extraneous NULL in linux_target_ops when HAVE_LINUX_BTRACE not defined

This fixes the followin error when HAVE_LINUX_BTRACE is not defined:

    linux-low.c:5943: error: excess elements in struct initializer
    linux-low.c:5943: error: (near initialization for 'linux_target_ops')

gdb/gdbserver/ChangeLog:

        * linux-low.c (linux_target_ops) [!HAVE_LINUX_BTRACE]:
        Remove extraneous NULL element.

Constify strings in tracepoint.c, lookup_cmd and the completers.

This is sort of a continuation of Keith's parse_exp_1 constification
patch.  It started out by undoing these bits:

  @@ -754,9 +754,12 @@ validate_actionline (char **line, struct
      tmp_p = p;
      for (loc = t->base.loc; loc; loc = loc->next)
        {
  -       p = tmp_p;
  -       exp = parse_exp_1 (&p, loc->address,
  +       const char *q;
  +
  +       q = tmp_p;
  +       exp = parse_exp_1 (&q, loc->address,
     block_for_pc (loc->address), 1);
  +       p = (char *) q;

and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).

That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.

I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.

I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.

The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const.  Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust.  No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg".  New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const.  Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char.  Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c".  Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char.  Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this.  Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg".  New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const.  Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const.  Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const.  Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust.  Don't frob the action string while splitting
it at commas.  Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.

* gdb.texinfo (Maintenance Commands): Add missing ')' for
"maint agent" reference to Dynamic printf.

More invalid pointer to pointer conversions.

As a follow up to:

  http://sourceware.org/ml/gdb-patches/2013-03/msg00449.html

In a nutshell, casts between 'char **' <-> 'unsigned char **' and
'char **' <-> 'const char **' are invalid.

I grepped for "\*\*) &" and found these.  There's another one in
demangle.c, but I've split fixing that one to a separate patch.

I think the ada_decode_symbol change is perhaps the one that could be
surprising.  The function's description has this comment, which makes
things much clearer:

   The GSYMBOL parameter is "mutable" in the C++ sense: logically
   const, but nevertheless modified to a semantically equivalent form
   when a decoded name is cached in it.  */

 const char *
 ada_decode_symbol (const struct general_symbol_info *gsymbol)

With that out of the way, I think the patch ends up being pretty
obvious.

Tested on x86_64 Fedora 17.

gdb/
2013-03-13  Pedro Alves  <palves@redhat.com>

* ada-lang.c (ada_decode_symbol): Cast away constness of GSYMBOL
rather than casting 'const char * const *' to 'const char **'.
* ada-lex.l (processInt): Make "trailer" local const.  Remove
'const char **' cast.
* arm-linux-tdep.c (arm_stap_parse_special_token): Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
(_initialize_demangle): Remove cast.
* i386-tdep.c (i386_stap_parse_special_token): : Add 'char *'
locals, and use those as strtol output pointer, instead than doing
invalid casts to from 'const char **' to 'char **'.
* solib-dsbt.c (dsbt_get_initial_loadmaps): Remove 'gdb_byte**'
casts.
* stap-probe.c (stap_parse_register_operand)
(stap_parse_single_operand): Likewise.

* tracepoint.c (tfile_get_trace_state_variable_value): Look for
the last matched 'V' blcok in trace frame.

gdb/gdbserver:

* tracepoint.c (traceframe_read_tsv): Look for the last matched
'V' block in trace frame.

gdb/testsuite:

* gdb.trace/tsv.exp (check_tsv): New.
(top level): Save a tfile on current trace session. Call
check_tsv on live target.  Load the tfile with target tfile
and call check_tsv again.

gdb/testsuite/
2013-03-13  Yao Qi  <yao@codesourcery.com>

* gdb.trace/tsv.exp: Remove code unrelated to testing TSV.
Replace some "gdb_test" with "gdb_test_no_output".

*** empty log message ***

daily update

* powerpc.cc (is_branch_reloc): Forward declare.
(Target_powerpc::do_can_check_for_function_pointers): New predicate.
(Target_powerpc::Scan::local_reloc_may_be_function_pointer): Return
false for 64-bit, true for 32-bit non-branch relocs.
(Target_powerpc::Scan::global_reloc_may_be_function_pointer): Likewise.
* testsuite/Makefile.am (icf_test): Use linker map file instead of
nm output.
(icf_safe_test): Generate linker map file as well as nm output.
(icf_safe_so_test): Likewise.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_test.sh: Parse linker map file to determine
section folding.
* testsuite/icf_safe_test.sh: Likewise.  Expect folding for PowerPC.
* testsuite/icf_safe_so_test.sh: Likewise.
(X86_32_or_ARM_specific_safe_fold): Merge into..
(arch_specific_safe_fold): ..this.
(X86_64_specific_safe_fold): Delete unused function.

Update NEWS file following GDB 7.6 branch creation.

gdb/ChangeLog:

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

Record GDB 7.6 branch creation. Bump version number to 7.6.50.20130312-cvs.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

gas/testsuite/
* gas/nios2/nios2.exp: Use run_dump_tests.
* gas/nios2/mov.d: Delete file.
* gas/nios2/mov.s: Likewise.
* gas/nios2/rol.d: Likewise.
* gas/nios2/rol.s: Likewise.
* gas/nios2/add.d: Check instruction values.
* gas/nios2/align_fill.d: Likewise.
* gas/nios2/and.d: Likewise.
* gas/nios2/branch.d: Likewise.
* gas/nios2/bret.d: Likewise.
* gas/nios2/cache.d: Likewise.
* gas/nios2/call.d: Likewise.
* gas/nios2/call26.d: Likewise.
* gas/nios2/cmp.d: Likewise.
* gas/nios2/comments.d: Likewise.
* gas/nios2/complex.d: Likewise.
* gas/nios2/ctl.d: Likewise.
* gas/nios2/custom.d: Likewise.
* gas/nios2/etbt.d: Likewise.
* gas/nios2/flushda.d: Likewise.
* gas/nios2/jmp.d: Likewise.
* gas/nios2/ldb.d: Likewise.
* gas/nios2/ldh.d: Likewise.
* gas/nios2/ldw.d: Likewise.
* gas/nios2/lineseparator.d: Likewise.
* gas/nios2/movi.d: Likewise.
* gas/nios2/movia.d: Likewise.
* gas/nios2/mul.d: Likewise.
* gas/nios2/nor.d: Likewise.
* gas/nios2/or.d: Likewise.
* gas/nios2/registers.d: Likewise.
* gas/nios2/ret.d: Likewise.
* gas/nios2/rotate.d: Likewise.
* gas/nios2/stb.d: Likewise.
* gas/nios2/sth.d: Likewise.
* gas/nios2/stw.d: Likewise.
* gas/nios2/sub.d: Likewise.
* gas/nios2/sync.d: Likewise.
* gas/nios2/trap.d: Likewise.
* gas/nios2/tret.d: Likewise.
* gas/nios2/xor.d: Likewise.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h: Edit comment.

gas/
* config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
case.  Add default BAD_CASE to switch.

gas/testsuite/
* gas/nios2/break.d: Check instruction values.

* mi/mi-cmds.h (mi_execute_command): Make "cmd" const.
* mi/mi-interp.c (mi_interpreter_exec): Make "command" const.
Remove temporary copy of input string.
(mi_execute_command_wrapper): Make "cmd" const.
* mi/mi-main.c (mi_execute_command): Make "string_ptr" const.
* mi/mi-parse.c (mi_parse_argv): Make "args" const.
Use const strings.
(mi_parse): Make "cmd" const.
Use const strings.
* mi/mi-parse.h (mi_parse): Make "cmd" const.

* ada-lang.c (ada_read_renaming_var_value): Pass const
pointer to expression string to parse_exp_1.
(create_excep_cond_exprs): Likewise.
* ax-gdb.c (agent_eval_command_one): Likewise.
(maint_agent_printf_command): Likewise.
Constify much of the string handling/parsing.
* breakpoint.c (set_breakpoint_condition): Pass const
pointer to expression string to parse_exp_1.
(update_watchpoint): Likewise.
(parse_cmd_to_aexpr): Constify string handling.
Pass const pointer to parse_exp_1.
(init_breakpoint_sal): Pass const pointer to parse_exp_1.
(find_condition_and_thread): Likewise.
Make TOK const.
(watch_command_1): Make "arg" const.
Constify string handling.
Copy the expression string instead of changing the input
string.
(update_breakpoint_location): Pass const pointer to
parse_exp_1.
* eval.c (parse_and_eval_address): Make "exp" const.
(parse_to_comma_and_eval): Make "expp" const.
(parse_and_eval): Make "exp" const.
* expression.h (parse_expression): Make argument const.
(parse_exp_1): Make first argument const.
* findcmd.c (parse_find_args): Treat "args" as const.
* linespec.c (parse_linespec): Pass const pointer to
linespec_expression_to_pc.
(linespec_expression_to_pc): Make "exp_ptr" const.
* parse.c (parse_exp_1): Make "stringptr" const.
Make a copy of the expression to pass to parse_exp_in_context until
this whole interface can be constified.
(parse_expression): Make "string" const.
* printcmd.c (ui_printf): Treat "arg" as const.
Handle const strings.
* tracepoint.c (validate_actionline): Pass const pointer to
all calls to parse_exp_1.
(encode_actions_1): Likewise.
* value.h (parse_to_comma_and_eval): Make argument const.
(parse_and_eval_address): Likewise.
(parse_and_eval): Likewise.
* varobj.c (varobj_create): Pass const pointer to parse_exp_1.
(varobj_set_value): Likewise.
* cli/cli-cmds.c (disassemble_command): Treat "arg" as const and
constify string handling.
Pass const pointers to parse_and_eval_address and
parse_to_comman_and_eval.
* cli/cli-utils.c (skip_to_space): Rename to ...
(skip_to_space_const): ... this. Handle const strings.
* cli/cli-utils.h (skip_to_space): Turn into macro which invokes
skip_to_space_const.
(skip_to_space_const): Declare.
* common/format.c (parse_format_string): Make "arg" const.
Handle const strings.
* common/format.h (parse_format_string): Make "arg" const.
* gdbserver/ax.c (ax_printf): Make "format" const.
* python/python.c (gdbpy_parse_and_eval): Do not make a copy
of the expression string.

2013-03-12  Hui Zhu  <hui@codesourcery.com>

* dwarf2loc.c (dwarf2_compile_expr_to_ax): Update error message.

Eliminate warning message.

* opcodes/mips-dis.c (print_insn_args): Modify def of reg.

2013-03-12  Yao Qi  <yao@codesourcery.com>
    Hui Zhu  <hui@codesourcery.com>

* dwarf2loc.c (access_memory): Change nbits to nbytes in gdb_assert.
(dwarf2_compile_expr_to_ax): Call access_memory in DW_OP_deref and
DW_OP_deref_size.

Allow 'thread' to be used as a variable name in expressions.

GDB treats the identifiers 'if', 'thread', and 'task' unconditionally
as expression delimiters in Ada mode, which is correct for 'if' and 'task',
but wrong for 'thread' in cases such as

      print thread

Borrowing from c-exp.y, we observe that 'thread' must be followed by
numerals, whereas identifiers never are and treat them as delimiters
only in that case.

In the process, the current also refactors and incidentally fixes the
code for rewinding the input to before the delimiting tokens.  For
example, the code

      watch expr if i > 2

fails because the input is only rewound to just before the 'i',
leaving the 'if' as part of the expression (and thus making the
rest look like trailing junk rather than a conditional clause).

gdb/ChangeLog:

    * ada-lex.l (rules): Only recognize 'thread' as a
    delimiter when followed by numerals, as for c-exp.y.
    Use new rewind_to_char function to rewind the input for
    expression-delimiting tokens.
    (rewind_to_char): New function.

gdb/testsuite/ChangeLog:

    * gdb.ada/expr_delims.exp: New file.
    * gdb.ada/expr_delims/foo.adb: New file.
    * gdb.ada/expr_delims/pck.ads: New file.
    * gdb.ada/expr_delims/pck.adb: New file.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h (OPX_WRPRS): New define.
(OP_MATCH_WRPRS): Likewise.

opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.

gas/
* config/tc-nios2.c (nios2_assemble_args_ds): New function.
(nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.

gas/testsuite/
* gas/nios2/nios2.exp: Run wrprs.
* gas/nios2/wrprs.d: New file.
* gas/nios2/wrprs.s: Likewise.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

include/
* opcode/nios2.h (OP_RDPRS): New define.
(OP_MATCH_RDPRS): Likewise.

opcodes/
* nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.

gas/testsuite/
* gas/nios2/nios2.exp: Run rdprs.
* gas/nios2/rdprs.d: New file.
* gas/nios2/rdprs.s: Likewise.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

opcodes/
* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.

gas/testsuite/
* gas/nios2/nios2.exp: Run registers.
* gas/nios2/registers.d: New file.
* gas/nios2/registers.s: Likewise.

* gc.h (gc_process_relocs): Look through function descriptors
to determine shndx, symvalue and addend used by ICF.  Tidy
variable duplication.

*** empty log message ***

daily update

* gdb.texinfo (General Query Packets): Don't use colon in index
entries visible to Info format.

* watchpoint.exp (test_no_hw_watchpoints): Add test using
both condition and thread.  Then delete the watchpoint.

gdb/
* configure: Regenerate.
* configure.ac (check dynamic export flag): Link python test with
$PYTHON_LIBS.

* linespec.c (find_linespec_symbols): Call find_function_symbols
first, and then call lookup_prefix_sym/find_method.

Avoid invalid pointer to pointer conversions.

Casts between 'char **' <-> 'unsigned char **' and 'char **' <-> const
char **' are actually invalid:

  http://gcc.gnu.org/ml/gcc-help/2013-03/msg00118.html

In a nutshell, char (and variants) can alias anything, but pointers to
chars get no special treatment (cf. C99/N1256, 6.5/7).

Turns out older gcc's actually warn/complain on these constructs,
though newer one's don't:

  http://sourceware.org/ml/gdb-patches/2013-03/msg00429.html
  http://sourceware.org/ml/gdb-patches/2013-03/msg00430.html

This patch fixes the cases I added last week.  It also fixes one other
preexisting case in charset.c, though it seems even older gccs don't
complain of char * <-> const char * aliasing.

Tested on x86_64 Fedora 17.

gdb/
2013-03-11  Pedro Alves  <palves@redhat.com>

* charset.c (convert_between_encodings): Don't cast between
different pointer to pointer types.  Instead, make the 'inp' local
be of the type iconv expects.
(wchar_iterate): Don't cast between different pointer to pointer
types.  Instead, use new pointer local of the type iconv expects.
* target.c (target_read_stralloc, target_fileio_read_stralloc):
Add new local of type char pointer, and use it to get a
char/string view of the byte buffer, instead of casting between
pointer to pointer types.

2013-03-11  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* remote.c (remote_set_trace_buffer_size): Move != operator
to the start of next line to fix an ARI warning.

Add support for AArch32 CRC instruction in ARMv8.

gas/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* config/tc-arm.c (crc_ext_armv8): New feature set.
(UNPRED_REG): New macro.
(do_crc32_1): New function.
(do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
do_crc32ch, do_crc32cw): Likewise.
(TUEc): New macro.
(insns): Add entries for crc32 mnemonics.
(arm_extensions): Add entry for crc.

include/opcode/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* arm.h (CRC_EXT_ARMV8): New constant.
(ARCH_CRC_ARMV8): New macro.

opcodes/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* arm-dis.c (arm_opcodes): Add entries for CRC instructions.
(thumb32_opcodes): Likewise.
(print_insn_thumb32): Handle 'S' control char.

gas/testsuite/ChangeLog
2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

* gas/arm/crc32-bad.d: New file.
* gas/arm/crc32-bad.l: Likewise.
* gas/arm/crc32-bad.s: Likewise.
* gas/arm/crc32.d: Likewise.
* gas/arm/crc32.s: Likewise.

Add tests for the new record-btrace target.

testsuite/
* Makefile.in: Add btrace testsuite.
* configure: Regenerated.
* configure.ac: Add btrace testsuite.
* gdb.btrace/Makefile.in: New file.
* gdb.btrace/enable.c: New file.
* gdb.btrace/enable.exp: New file.
* gdb.btrace/function_call_history.c: New file.
* gdb.btrace/function_call_history.exp: New file.
* gdb.btrace/instruction_history.c: New file.
* gdb.btrace/instruction_history.exp: New file.
* gdb.btrace/instruction_history.S: New file.
* lib/gdb.exp: Add btrace skip proc.

Document changes to the record target resulting from the renaming into
record-full.

Document two new record sub-commands "record instruction-history" and
"record function-call-history" and two associated set/show commands
"set record instruction-history-size" and "set record
function-call-history-size".

Add this to NEWS.

gdb/
* NEWS: Add record changes.

doc/
* gdb.texinfo (Process Record and Replay): Document record
changes.

Add a disassembly flag to omit the pc prefix and use it in the "record
instruction-history" command of record-btrace.

The pc prefix would appear multiple times in the branch trace disassembly,
which is more confusing than helpful.

gdb/
* record-btrace.c (btrace_insn_history): Omit the pc prefix in
the instruction history disassembly.
* disasm.c (dump_insns): Omit the pc prefix, if requested.
* disasm.h (DISASSEMBLY_OMIT_PC): New.

Add a target for branch trace recording.

The target implements the new record sub-commands
"record instruction-history" and
"record function-call-history".

The target does not support reverse execution or navigation in the
recorded execution log.

gdb/
* Makefile.in (SFILES): Add record-btrace.c
(COMMON_OBS): Add record-btrace.o
* record-btrace.c: New.
* objfiles.c: Include btrace.h.
(free_objfile): call btrace_free_objfile.

Add command to print the function names from recorded instructions.

This command provides a quick high-level overview over the recorded execution
log at function granularity without having to reverse-step.

gdb/
* target.c (target_call_history, target_call_history_from,
target_call_history_range): New.
* target.h (target_ops) <to_call_history, to_call_history_from,
to_call_history_range>: New fields.
(target_call_history, target_call_history_from,
target_call_history_range): New declaration.
* record.c (get_call_history_modifiers, cmd_record_call_history,
record_call_history_size): New.
(_initialize_record): Add the "record function-call-history" command.
Add "set/show record function-call-history-size" commands.
* record.h (record_print_flag): New.

Add a command to provide a disassembly of the execution trace log.

gdb/
* target.h (target_ops) <to_insn_history, to_insn_history_from,
to_insn_history_range>: New fields.
(target_insn_history): New.
(target_insn_history_from): New.
(target_insn_history_range): New.
* target.c (target_insn_history): New.
(target_insn_history_from): New.
(target_insn_history_range): New.
* record.c: Include cli/cli-utils.h, disasm.h, ctype.h.
(record_insn_history_size): New.
(get_insn_number): New.
(get_context_size): New.
(no_chunk): New.
(get_insn_history_modifiers): New.
(cmd_record_insn_history): New.
(_initialize_record): Add "set/show record instruction-history-size"
command. Add "record instruction-history" command.

Provide default target methods for record targets that are likely to be shared
between different record targets.

gdb/
* record.h (record_disconnect): New.
(record_detach): New.
(record_mourn_inferior): New.
(record_kill): New.
* record-full.c (record_disconnect, record_detach,
record_mourn_inferior, record_kill): Move to...
* record.c: ...here.
(DEBUG): New.
(record_stop): New.
(record_unpush): New.
(cmd_record_stop): Call record_stop. Replace unpush_target
call with record_unpush call.
(record_disconnect, record_detach): Assert that the target
is of record stratum. Call record_unpush, record_stop, and
DEBUG.
(record_mourn_inferior, record_kill): Assert that the target
is of record stratum. Call record_unpush and DEBUG.

Rename record_ prefixes in record-full.h into record_full_.

gdb/
* record-full.h, record-full.c (record_memory_query): Rename
to ...
(record_full_memory_query): ...this. Update all users.
(record_arch_list_add_reg): Rename to ...
(record_full_arch_list_add_reg): ...this. Update all users.
(record_arch_list_add_mem): Rename to ...
(record_full_arch_list_add_mem): ...this. Update all users.
(record_arch_list_add_end): Rename to ...
(record_full_arch_list_add_end): ...this. Update all users.
(record_gdb_operation_disable_set): Rename to ...
(record_full_gdb_operation_disable_set): ...this.
Update all users.

Rename record_ prefixes in record-full.c into record_full_.

gdb/
* record-full.c (DEFAULT_RECORD_INSN_MAX_NUM): Renamed to ...
(DEFAULT_RECORD_FULL_INSN_MAX_NUM): ... this. Updated all users.
(RECORD_IS_REPLAY): Renamed to ...
(RECORD_FULL_IS_REPLAY): ... this. Updated all users.
(RECORD_FILE_MAGIC): Renamed to ...
(RECORD_FULL_FILE_MAGIC): ... this. Updated all users.
(record_mem_entry): Renamed to ...
(record_full_mem_entry): ... this. Updated all users.
(record_reg_entry): Renamed to ...
(record_full_reg_entry): ... this. Updated all users.
(record_end_entry): Renamed to ...
(record_full_end_entry): ... this. Updated all users.
(record_type) <record_end, record_reg, record_mem>: Renamed
to ...
(record_full_type) <record_full_end, record_full_reg,
record_full_mem>: ... this. Updated all users.
(record_entry): Renamed to ...
(record_full_entry): ... this. Updated all users.
(record_core_buf_entry): Renamed to ...
(record_full_core_buf_entry): ... this. Updated all users.
(record_core_regbuf): Renamed to ...
(record_full_core_regbuf): ... this. Updated all users.
(record_core_start): Renamed to ...
(record_full_core_start): ... this. Updated all users.
(record_core_end): Renamed to ...
(record_full_core_end): ... this. Updated all users.
(record_core_buf_list): Renamed to ...
(record_full_core_buf_list): ... this. Updated all users.
(record_first): Renamed to ...
(record_full_first): ... this. Updated all users.
(record_list): Renamed to ...
(record_full_list): ... this. Updated all users.
(record_arch_list_head): Renamed to ...
(record_full_arch_list_head): ... this. Updated all users.
(record_arch_list_tail): Renamed to ...
(record_full_arch_list_tail): ... this. Updated all users.
(record_stop_at_limit): Renamed to ...
(record_full_stop_at_limit): ... this. Updated all users.
(record_insn_max_num): Renamed to ...
(record_full_insn_max_num): ... this. Updated all users.
(record_insn_num): Renamed to ...
(record_full_insn_num): ... this. Updated all users.
(record_insn_count): Renamed to ...
(record_full_insn_count): ... this. Updated all users.
(record_ops): Renamed to ...
(record_full_ops): ... this. Updated all users.
(record_core_ops): Renamed to ...
(record_full_core_ops): ... this. Updated all users.
(set_record_cmdlist): Renamed to ...
(set_record_full_cmdlist): ... this. Updated all users.
(show_record_cmdlist): Renamed to ...
(show_record_full_cmdlist): ... this. Updated all users.
(record_cmdlist): Renamed to ...
(record_full_cmdlist): ... this. Updated all users.
(record_beneath_to_resume_ops): Renamed to ...
(record_full_beneath_to_resume_ops): ... this. Updated all users.
(record_beneath_to_resume): Renamed to ...
(record_full_beneath_to_resume): ... this. Updated all users.
(record_beneath_to_wait_ops): Renamed to ...
(record_full_beneath_to_wait_ops): ... this. Updated all users.
(record_beneath_to_wait): Renamed to ...
(record_full_beneath_to_wait): ... this. Updated all users.
(record_beneath_to_store_registers_ops): Renamed to ...
(record_full_beneath_to_store_registers_ops): ... this.
Updated all users.
(record_beneath_to_store_registers): Renamed to ...
(record_full_beneath_to_store_registers): ... this.
Updated all users.
(record_beneath_to_xfer_partial_ops): Renamed to ...
(record_full_beneath_to_xfer_partial_ops): ... this.
Updated all users.
(record_beneath_to_xfer_partial): Renamed to ...
(record_full_beneath_to_xfer_partial): ... this.
Updated all users.
(record_beneath_to_insert_breakpoint): Renamed to ...
(record_full_beneath_to_insert_breakpoint): ... this.
Updated all users.
(record_beneath_to_stopped_by_watchpoint): Renamed to ...
(record_full_beneath_to_stopped_by_watchpoint): ... this.
Updated all users.
(record_beneath_to_stopped_data_address): Renamed to ...
(record_full_beneath_to_stopped_data_address): ... this.
Updated all users.
(record_beneath_to_async): Renamed to ...
(record_full_beneath_to_async): ... this. Updated all users.
(record_goto_insn): Renamed to ...
(record_full_goto_insn): ... this. Updated all users.
(record_save): Renamed to ...
(record_full_save): ... this. Updated all users.
(record_reg_alloc): Renamed to ...
(record_full_reg_alloc): ... this. Updated all users.
(record_reg_release): Renamed to ...
(record_full_reg_release): ... this. Updated all users.
(record_mem_alloc): Renamed to ...
(record_full_mem_alloc): ... this. Updated all users.
(record_mem_release): Renamed to ...
(record_full_mem_release): ... this. Updated all users.
(record_end_alloc): Renamed to ...
(record_full_end_alloc): ... this. Updated all users.
(record_end_release): Renamed to ...
(record_full_end_release): ... this. Updated all users.
(record_entry_release): Renamed to ...
(record_full_entry_release): ... this. Updated all users.
(record_list_release): Renamed to ...
(record_full_list_release): ... this. Updated all users.
(record_list_release_following): Renamed to ...
(record_full_list_release_following): ... this.
Updated all users.
(record_list_release_first): Renamed to ...
(record_full_list_release_first): ... this. Updated all users.
(record_arch_list_add): Renamed to ...
(record_full_arch_list_add): ... this. Updated all users.
(record_get_loc): Renamed to ...
(record_full_get_loc): ... this. Updated all users.
(record_check_insn_num): Renamed to ...
(record_full_check_insn_num): ... this. Updated all users.
(record_arch_list_cleanups): Renamed to ...
(record_full_arch_list_cleanups): ... this. Updated all users.
(record_message): Renamed to ...
(record_full_message): ... this. Updated all users.
(record_message_wrapper): Renamed to ...
(record_full_message_wrapper): ... this. Updated all users.
(record_message_wrapper_safe): Renamed to ...
(record_full_message_wrapper_safe): ... this. Updated all users.
(record_gdb_operation_disable): Renamed to ...
(record_full_gdb_operation_disable): ... this. Updated all users.
(record_hw_watchpoint): Renamed to ...
(record_full_hw_watchpoint): ... this. Updated all users.
(record_exec_insn): Renamed to ...
(record_full_exec_insn): ... this. Updated all users.
(record_restore): Renamed to ...
(record_full_restore): ... this. Updated all users.
(record_async_inferior_event_token): Renamed to ...
(record_full_async_inferior_event_token): ... this.
Updated all users.
(record_async_inferior_event_handler): Renamed to ...
(record_full_async_inferior_event_handler): ... this.
Updated all users.
(record_core_open_1): Renamed to ...
(record_full_core_open_1): ... this. Updated all users.
(record_open_1): Renamed to ...
(record_full_open_1): ... this. Updated all users.
(record_open): Renamed to ...
(record_full_open): ... this. Updated all users.
(record_close): Renamed to ...
(record_full_close): ... this. Updated all users.
(record_resume_step): Renamed to ...
(record_full_resume_step): ... this. Updated all users.
(record_resumed): Renamed to ...
(record_full_resumed): ... this. Updated all users.
(record_execution_dir): Renamed to ...
(record_full_execution_dir): ... this. Updated all users.
(record_resume): Renamed to ...
(record_full_resume): ... this. Updated all users.
(record_get_sig): Renamed to ...
(record_full_get_sig): ... this. Updated all users.
(record_sig_handler): Renamed to ...
(record_full_sig_handler): ... this. Updated all users.
(record_wait_cleanups): Renamed to ...
(record_full_wait_cleanups): ... this. Updated all users.
(record_wait_1): Renamed to ...
(record_full_wait_1): ... this. Updated all users.
(record_wait): Renamed to ...
(record_full_wait): ... this. Updated all users.
(record_stopped_by_watchpoint): Renamed to ...
(record_full_stopped_by_watchpoint): ... this. Updated all users.
(record_disconnect): Renamed to ...
(record_full_disconnect): ... this. Updated all users.
(record_detach): Renamed to ...
(record_full_detach): ... this. Updated all users.
(record_mourn_inferior): Renamed to ...
(record_full_mourn_inferior): ... this. Updated all users.
(record_kill): Renamed to ...
(record_full_kill): ... this. Updated all users.
(record_stopped_data_address): Renamed to ...
(record_full_stopped_data_address): ... this. Updated all users.
(record_registers_change): Renamed to ...
(record_full_registers_change): ... this. Updated all users.
(record_store_registers): Renamed to ...
(record_full_store_registers): ... this. Updated all users.
(record_xfer_partial): Renamed to ...
(record_full_xfer_partial): ... this. Updated all users.
(record_breakpoint): Renamed to ...
(record_full_breakpoint): ... this. Updated all users.
(record_breakpoint_p): Renamed to ...
(record_full_breakpoint_p): ... this. Updated all users.
(record_breakpoints): Renamed to ...
(record_full_breakpoints): ... this. Updated all users.
(record_sync_record_breakpoints): Renamed to ...
(record_full_sync_record_breakpoints): ... this.
Updated all users.
(record_init_record_breakpoints): Renamed to ...
(record_full_init_record_breakpoints): ... this.
Updated all users.
(record_insert_breakpoint): Renamed to ...
(record_full_insert_breakpoint): ... this. Updated all users.
(record_remove_breakpoint): Renamed to ...
(record_full_remove_breakpoint): ... this. Updated all users.
(record_can_execute_reverse): Renamed to ...
(record_full_can_execute_reverse): ... this. Updated all users.
(record_get_bookmark): Renamed to ...
(record_full_get_bookmark): ... this. Updated all users.
(record_goto_bookmark): Renamed to ...
(record_full_goto_bookmark): ... this. Updated all users.
(record_async): Renamed to ...
(record_full_async): ... this. Updated all users.
(record_can_async_p): Renamed to ...
(record_full_can_async_p): ... this. Updated all users.
(record_is_async_p): Renamed to ...
(record_full_is_async_p): ... this. Updated all users.
(record_execution_direction): Renamed to ...
(record_full_execution_direction): ... this. Updated all users.
(record_info): Renamed to ...
(record_full_info): ... this. Updated all users.
(record_delete): Renamed to ...
(record_full_delete): ... this. Updated all users.
(record_is_replaying): Renamed to ...
(record_full_is_replaying): ... this. Updated all users.
(record_goto_entry): Renamed to ...
(record_full_goto_entry): ... this. Updated all users.
(record_goto_begin): Renamed to ...
(record_full_goto_begin): ... this. Updated all users.
(record_goto_end): Renamed to ...
(record_full_goto_end): ... this. Updated all users.
(record_goto): Renamed to ...
(record_full_goto): ... this. Updated all users.
(init_record_ops): Renamed to ...
(init_record_full_ops): ... this. Updated all users.
(record_core_resume): Renamed to ...
(record_full_core_resume): ... this. Updated all users.
(record_core_kill): Renamed to ...
(record_full_core_kill): ... this. Updated all users.
(record_core_fetch_registers): Renamed to ...
(record_full_core_fetch_registers): ... this. Updated all users.
(record_core_prepare_to_store): Renamed to ...
(record_full_core_prepare_to_store): ... this. Updated all users.
(record_core_store_registers): Renamed to ...
(record_full_core_store_registers): ... this. Updated all users.
(record_core_xfer_partial): Renamed to ...
(record_full_core_xfer_partial): ... this. Updated all users.
(record_core_insert_breakpoint): Renamed to ...
(record_full_core_insert_breakpoint): ... this. Updated all users.
(record_core_remove_breakpoint): Renamed to ...
(record_full_core_remove_breakpoint): ... this. Updated all users.
(record_core_has_execution): Renamed to ...
(record_full_core_has_execution): ... this. Updated all users.
(init_record_core_ops): Renamed to ...
(init_record_full_core_ops): ... this. Updated all users.
(cmd_record_restore): Renamed to ...
(cmd_record_full_restore): ... this. Updated all users.
(record_save_cleanups): Renamed to ...
(record_full_save_cleanups): ... this. Updated all users.
(cmd_record_start): Renamed to ...
(cmd_record_full_start): ... this. Updated all users.
(set_record_insn_max_num): Renamed to ...
(set_record_full_insn_max_num): ... this. Updated all users.
(set_record_command): Renamed to ...
(set_record_full_command): ... this. Updated all users.
(show_record_command): Renamed to ...
(show_record_full_command): ... this. Updated all users.
(_initialize_record): Renamed to ...
(_initialize_record_full): ... this. Updated all users.

Split record.h into record.h and record-full.h.
Split record.c into record.c and record-full.c.

The split leaves the command part in record.c and moves the target part into
record-full.c.

gdb/
* record.h: Split into this and ...
* record-full.h: ... this.
* record.c: Split into this and ...
* record-full.c: ... this.
* target.h (target_ops): Add new fields to_info_record,
to_save_record, to_delete_record, to_record_is_replaying,
to_goto_record_begin, to_goto_record_end, to_goto_record.
(target_info_record): New.
(target_save_record): New.
(target_supports_delete_record): New.
(target_delete_record): New.
(target_record_is_replaying): New.
(target_goto_record_begin): New.
(target_goto_record_end): New.
(target_goto_record): New.
* target.c (target_info_record): New.
(target_save_record): New.
(target_supports_delete_record): New.
(target_delete_record): New.
(target_record_is_replaying): New.
(target_goto_record_begin): New.
(target_goto_record_end): New.
(target_goto_record): New.
* record.h: Declare struct cmd_list_element.
(record_cmdlist): New declaration.
(set_record_cmdlist): New declaration.
(show_record_cmdlist): New declaration.
(info_record_cmdlist): New declaration.
(cmd_record_goto): New declaration.
* record.c: Remove unnecessary includes.
Include inferior.h.
(cmd_record_goto): Remove declaration.
(record_cmdlist): Now extern. Initialize.
(set_record_cmdlist): Now extern. Initialize.
(show_record_cmdlist): Now extern. Initialize.
(info_record_cmdlist): Now extern. Initialize.
(find_record_target): New.
(require_record_target): New.
(cmd_record_start): Update.
(cmd_record_delete): Remove target-specific code.
Call target_delete_record.
(cmd_record_stop): Unpush any record target.
(set_record_insn_max_num): Move to record-full.c
(set_record_command): Add comment.
(show_record_command): Add comment.
(info_record_command): Update comment.
Remove target-specific code.
Call the record target's to_info_record.
(cmd_record_start): New.
(cmd_record_goto): Now extern.
Remove target-specific code.
Call target_goto_begin,  target_goto_end, or target_goto.
(_initialize_record): Move record target ops initialization to
record-full.c.
Change "record" command help text.
Move "record restore", "record set", and "record show" commands to
record-full.c.
* Makefile.in (SFILES): Add record-full.c.
(HFILES_NO_SRCDIR): Add record-full.h.
(COMMON_OBS): Add record-full.o.
* amd64-linux-tdep.c: Include record-full.h instead of record.h.
* arm-tdep.c: Include record-full.h.
* i386-linux-tdep.c: Include record-full.h instead of record.h.
* i386-tdep.c: Include record-full.h.
* infrun.c: Include record-full.h.
* linux-record.c: Include record-full.h.
* moxie-tdep.c: Include record-full.h.
* record-full.c: Include record-full.h.
Change module comment.
(set_record_full_cmdlist): New.
(show_record_full_cmdlist): New.
(record_full_cmdlist): New.
(record_goto_insn): New declaration.
(record_save): New declaration.
(record_check_insn_num): Change query string.
(record_info): New.
(record_delete): New.
(record_is_replaying): New.
(record_goto_entry): New.
(record_goto_begin): New.
(record_goto_end): New.
(record_goto): New.
(init_record_ops): Update.
(init_record_core_ops): Update.
(cmd_record_save): Rename to record_save. Remove target and arg checks.
(cmd_record_start): New.
(set_record_insn_max_num): Moved from record.c
(set_record_full_command): New.
(show_record_full_command): New.
(_initialize_record_full): New.

Add a new function to target.h to add an alias command for a target and mark it
deprecated.  This is useful when renaming targets.

gdb/
* target.h (add_deprecated_target_alias): New.
* target.c (add_deprecated_target_alias): New.

LBR, BTM, or BTS records may have incorrect branch "from" information afer an
EIST transition, T-states, C1E, or Adaptive Thermal Throttling (AAJ122).

This results in sporadic test fails. Disable btrace on those processors.

gdb/
* common/linux-btrace.c: Include sys/ptrace, sys/types, sys/wait.h,
and signal.h.
(linux_supports_btrace): Add kernel and
cpuid check.
(kernel_supports_btrace): New function.
(cpu_supports_btrace): New function.
(intel_supports_btrace): New function.

Document the branch tracing extensions to the remote serial protocol.

doc/
* gdb.texinfo (Requirements): List qXfer:btrace:read requiring expat.
(General Query Packets): Describe Qbtrace:bts, Qbtrace:off, and
qXfer:btrace:read.

Add the gdb remote target operations for branch tracing.
We define the following packets:

  Qbtrace:bts         enable branch tracing for the current thread
                      returns "OK" or "Enn"

  Qbtrace:off         disable branch tracing for the current thread
                      returns "OK" or "Enn"

  qXfer:btrace:read   read the full branch trace data for the current thread

gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.

gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.

Preserve a verbose error message of xfer functions if they return -3.

gdbserver/
* server.c (handle_qxfer): Preserve error message if -3 is
returned.
(qxfer): Document the -3 return value.

Define the xml document style for transferring branch trace data.

Add a function to parse a btrace xml document into a vector of branch trace
blocks.

gdb/
* features/btrace.dtd: New file.
* Makefile.in (XMLFILES): Add btrace.dtd.
* btrace.h (parse_xml_btrace): New declaration.
* btrace.c: Include xml-support.h.
(parse_xml_btrace): New function.
(parse_xml_btrace_block): New function.
(block_attributes): New struct.
(btrace_attributes): New struct.
(btrace_children): New struct.
(btrace_elements): New struct.

Install the btrace target ops for i386-linux-nat and amd64-linux-nat.

gdb/
* amd64-linux-nat.c: Include btrace.h and linux-btrace.h.
(amd64_linux_enable_btrace): New.
(amd64_linux_disable_btrace): New.
(amd64_linux_teardown_btrace): New.
(_initialize_amd64_linux_nat): Initialize btrace ops.
* i386-linux.nat.c: Include btrace.h and linux-btrace.h.
(i386_linux_enable_btrace): New.
(i386_linux_disable_btrace): New.
(i386_linux_teardown_btrace): New.
(_initialize_i386_linux_nat): Initialize btrace ops.
* config/i386/linux.mh: Add linux-btrace.o.
* config/i386/linux64.mh: Add linux-btrace.o.

Implement branch tracing on Linux based on perf_event such that it can be shared
between gdb and gdbserver.

gdb/
* common/linux_btrace.h: New file.
* common/linux_btrace.c: New file.
* Makefile.in (SFILES): Add btrace.c.
(HFILES_NO_SRCDIR): Add common/linux-btrace.h.
(COMMON_OBS): Add btrace.o.
(linux-btrace.o): New rule.

gdbserver/
* Makefile.in (SFILES): Add $(srcdir)/common/linux-btrace.c.
(linux_btrace_h): New variable.
(linux-btrace.o): New rule.

Fix ChangeLog date.

Add branch trace information to struct thread_info.

Add functions to enable, disable, clear, and fetch a thread's branch trace.

gdb/
* target.h: Include btrace.h.
(struct target_ops) <to_supports_btrace, to_enable_btrace,
to_disable_btrace, to_teardown_btrace, to_read_btrace>: New.
* target.c (target_supports_btrace): New function.
(target_enable_btrace): New function.
(target_disable_btrace): New function.
(target_teardown_btrace): New function.
(target_read_btrace): New function.
* btrace.h: New file.
* btrace.c: New file.
* Makefile.in: Add btrace.c.
* gdbthread.h: Include btrace.h.
(struct thread_info): Add btrace field.
* thread.c: Include btrace.h.
(clear_thread_inferior_resources): Call target_teardown_btrace.
* common/btrace-common.h: New file.

*** empty log message ***

* gold.cc (queue_middle_tasks): Move detect_odr_violations..
* layout.cc (Layout_task_runner::run): ..to here.
* symtab.h (struct Symbol_location): Extract from..
(class Symbol_table): ..here.
* symtab.cc (Symbol_table::linenos_from_loc): Invoke function_location.
* target.h (class Target): Add function_location and
do_function_location functions.
(class Sized_target): Add do_function_location.
* object.h (class Sized_relobj_file): Move find_shdr..
(class Object): ..to here.
* object.cc: Likewise.  Update to suit.  Instantiate.
(Sized_relobj_file::find_eh_frame): Update find_shdr call.
* powerpc.cc (class Powerpc_dynobj): New.
(Target_powerpc::do_function_location): New function.
(Powerpc_relobj::do_find_special_sections): Update find_shdr call.
(Powerpc_dynobj::do_read_symbols): New function.
(Target_powerpc::do_make_elf_object): Make a Powerpc_dynobj.

daily update

gdb/
* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Call also kill
for CHILD, ignore PTRACE_KILL errors, move the inner block variable
kill_status to outer block.

gdb/
Fix entry-values if the callee called a noreturn function.
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
get_frame_address_in_block.  Add new comment.

gdb/testsuite/
Fix entry-values if the callee called a noreturn function.
* gdb.arch/amd64-tailcall-noret.S: New file.
* gdb.arch/amd64-tailcall-noret.c: New file.
* gdb.arch/amd64-tailcall-noret.exp: New file.

gdb/
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol.  Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.

gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.

*** empty log message ***

daily update

2013-03-09 Hafiz Abid Qadeer  <abidh@codesourcery.com>

Fixed year number in Changelog files.

Fix last commit.

 doc/gdb.texinfo (General Query Packets, Tracepoint Packets): Don't
 use colons in @anchor and @cindex entries.

2012-03-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* gdb.texinfo (QTBuffer:size): Add cindex and anchor.

*** empty log message ***

daily update

* options.cc (General_options::string_to_object_format): Accept
"default".

    * elf64-aarch64.c (elf_backend_can_gc_sections): Enable
gc-section support.
        (elf64_aarch64_gc_sweep_hook): Handle GOT, TLS and PLT related relocs.

        * lib/ld-lib.exp (check_gc_sections_available): Remove aarch64
from list of
        targets that don't support gc-section.

PR binutils/15241
* lm32.cpu (Control and status registers): Add CFG2, PSW,
TLBVADDR, TLBPADDR and TLBBADVADDR.

* lm32-desc.c: Regenerate.

* elf-bfd.h (elfcore_write_s390_tdb): Add prototype.
* elf.c (elfcore_write_s390_tdb): New function.
(elfcore_write_register_note): Call it.
(elfcore_grok_s390_tdb): New function.
(elfcore_grok_note): Call it.

* readelf.c (get_note_type): Add NT_S390_TDB.

gdb/

* tracepoint.c (_initialize_tracepoint): Indent the code.

find command, fix -Wpoint-sign

From: Pedro Alves <palves@redhat.com>

The find command's patter/buffer that is passed to the target is a
binary blob, not a string.

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" findcmd.o -k 2>&1 1>/dev/null
../../src/gdb/findcmd.c: In function ‘find_command’:
../../src/gdb/findcmd.c:278:6: error: pointer targets in passing argument 3 of ‘target_search_memory’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/findcmd.c:26:0:
../../src/gdb/target.h:1582:12: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’

gdb/
2013-03-08  Pedro Alves  <palves@redhat.com>

* findcmd.c (put_bits): Change type of parameter to 'gdb_byte *'.
(parse_find_args, find_command): Change type of pattern buffer
locals to 'gdb_byte *'.

2012-03-08  Stan Shebs  <stan@codesourcery.com>
    Hafiz Abid Qadeer  <abidh@codesourcery.com>

gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.

gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.

gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.

gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.

* remote-m32r-sdi.c (m32r_load): Call skip_spaces on correct
variable.

* elfxx-mips.c (mips_elf_allocate_lazy_stub): Correct data type.

2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>

* write.h (struct fix): Add fx_dot_frag field.
(dot_frag): Declare.
* write.c (dot_frag): New variable.
(fix_new_internal): Set fx_dot_frag field with dot_frag.
(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
* expr.c (expr): Save value of frag_now in dot_frag when setting
dot_value.
* read.c (emit_expr): Likewise. Delete comments.

*** empty log message ***

target.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" target.o -k 2>&1 1>/dev/null
../../src/gdb/target.c: In function ‘target_read_stralloc’:
../../src/gdb/target.c:2376:3: error: pointer targets in passing argument 1 of ‘strlen’ differ in signedness [-Werror=pointer-sign]
In file included from build-gnulib/import/string.h:27:0,
                 from ../../src/gdb/common/gdb_string.h:24,
                 from ../../src/gdb/target.c:24:
/usr/include/string.h:399:15: note: expected ‘const char *’ but argument is of type ‘gdb_byte *’
...

This is about the same as the previous patch.

Functions that take or return ascii-ish string arguments usually use
char* for parameters/return.  That means that at points we call into
target methods that work with binary blobs, we need casts to/from
gdb_byte*/char*.  To choose which type for the variables, I usually go
based on which requires the fewer casts, and what the contents of the
variable are supposed to hold, which often gives the same answer.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* target.c (target_read_stralloc, target_fileio_read_alloc):
*Cast pointer to 'gdb_byte *' in target call.

corefile.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" corefile.o -k 2>&1 1>/dev/null
../../src/gdb/corefile.c: In function ‘read_memory_string’:
../../src/gdb/corefile.c:334:7: error: pointer targets in passing argument 2 of ‘read_memory’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/corefile.c:217:1: note: expected ‘gdb_byte *’ but argument is of type ‘char *’

Functions that take or return ascii-ish string arguments usually use
char* for parameters/return.  That means that at points we call into
target methods that work with binary blobs, we need casts to
gdb_byte*.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* corefile.c (read_memory_string): Cast pointer to gdb_byte* in
call.

* ehframe.h (Post_fdes) Make it a vector of Post_fde rather than
pointer to Post_fde.
(struct Post_fde): Move definition to here..
* ehframe.cc (struct Post_fde): ..from here.
(Cie::write): Don't alloc Post_fde.
(Eh_frame::do_sized_write): Update.  Don't free Post_fde.

daily update

* breakpoint.c (catch_syscall_split_args): Use skip_spaces.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.

Rewrote i386_index_check

* config/tc-i386.c (flag_code_names): Removed.
(i386_index_check): Rewrote.

Fix -Wpointer-sign around strings/encoding conversions.

Trimmed for brevity:

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" c-lang.o expprint.o utils.o valprint.o varobj.o -k 2>&1 1>/dev/null
../../src/gdb/c-lang.c: In function ‘parse_one_string’:
../../src/gdb/c-lang.c:540:8: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/c-lang.c:30:0:
../../src/gdb/charset.h:64:6: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’

../../src/gdb/expprint.c: In function ‘print_subexp_standard’:
../../src/gdb/expprint.c:205:2: error: pointer targets in passing argument 3 of ‘current_language->la_printstr’ differ in signedness [-Werror=pointer-sign]
../../src/gdb/expprint.c:205:2: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’

cc1: all warnings being treated as errors
make: *** [expprint.o] Error 1
../../src/gdb/utils.c: In function ‘host_char_to_target’:
../../src/gdb/utils.c:1474:9: error: pointer targets in passing argument 3 of ‘convert_between_encodings’ differ in signedness [-Werror=pointer-sign]

../../src/gdb/varobj.c: In function ‘value_get_print_value’:
../../src/gdb/varobj.c:2934:8: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2968:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/varobj.c:2971:3: error: pointer targets in return differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [varobj.o] Error 1

As with the previous patch, the encoding conversion code works with
gdb_byte arrays as the generic buffers that hold strings of any
encoding/width.  This patch adds casts where appropriate.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* c-lang.c (parse_one_string): Cast argument to gdb_byte *.
* expprint.c (print_subexp_standard): Likewise.
* utils.c (host_char_to_target): Likewise.
* valprint.c (generic_emit_char, generic_printstr): Likewise.
* varobj.c (value_get_print_value): Change type of local to char*.
Cast it gdb_byte * in call to language printer.

charset.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" charset.o 2>&1 1>/dev/null
../../src/gdb/charset.c: In function ‘wchar_iterate’:
../../src/gdb/charset.c:665:13: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/charset.c:691:13: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/charset.c:706:12: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]

The encoding conversion code works with gdb_byte arrays as the generic
buffers that hold strings of any encoding/width.  Changing the type of
this field to gdb_byte* removes the need for one cast, and makes
everything work with the same types.  That's good -- WRT to strings,
"char *" is (almost) consistently throughout GDB only used for
ascii-ish strings.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* charset.c (struct wchar_iterator) <input>: Change type to 'const
gdb_byte *'.
(make_wchar_iterator): Remove cast to char*.
(wchar_iterate): Change type of local.

regcache.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" regcache.o 2>&1 1>/dev/null
../../src/gdb/regcache.c: In function ‘regcache_xmalloc_1’:
../../src/gdb/regcache.c:228:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
../../src/gdb/regcache.c:235:2: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors

regcache->register_status is "signed char".

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* regcache.c (regcache_xmalloc_1): Call XCALLOC with signed char
for 'regcache->register_status'.

Fix typo.

breakpoint.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" breakpoint.o 2>&1 1>/dev/null
../../src/gdb/breakpoint.c: In function ‘breakpoint_xfer_memory’:
../../src/gdb/breakpoint.c:1578:2: error: pointer targets in passing argument 3 of ‘gdbarch_breakpoint_from_pc’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/defs.h:644:0,
                 from ../../src/gdb/breakpoint.c:20:
../../src/gdb/gdbarch.h:495:25: note: expected ‘int *’ but argument is of type ‘unsigned int *’

target_info.placed_size is an 'int', and gdbarch_breakpoint_from_pc
takes an int too.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* breakpoint.c.c (breakpoint_xfer_memory): Change type of local to
int.

stap-probe.c: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" stap-probe.o 2>&1 1>/dev/null
../../src/gdb/stap-probe.c: In function ‘handle_stap_probe’:
../../src/gdb/stap-probe.c:1306:19: error: pointer targets in assignment differ in signedness [-Werror=pointer-sign]
cc1: all warnings being treated as errors
make: *** [stap-probe.o] Error 1

provider is a string, so it's rightfully a char*.  'data' holds raw
bytes (bfd_byte), so a cast is the right thing to do.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* stap-probe.c (handle_stap_probe): Add cast to char*.

linux-record.c:record_linux_system_call: fix -Wpointer-sign

$ make WERROR_CFLAGS="-Wpointer-sign -Werror" linux-record.o 2>&1 1>/dev/null
...
../../src/gdb/linux-record.c: In function ‘record_linux_system_call’:
../../src/gdb/linux-record.c:1152:9: error: pointer targets in passing argument 3 of ‘regcache_raw_read_signed’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/linux-record.c:23:0:
../../src/gdb/regcache.h:76:3: note: expected ‘long int *’ but argument is of type ‘long unsigned int *’
../../src/gdb/linux-record.c:1186:13: error: pointer targets in passing argument 3 of ‘regcache_raw_read_signed’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/linux-record.c:23:0:
../../src/gdb/regcache.h:76:3: note: expected ‘long int *’ but argument is of type ‘long unsigned int *’

I believe the read_signed calls are correct, and the variables are in
the wrong.

Tested on x86_64 Fedora 17.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* linux-record.c (record_linux_system_call) <gdb_sys_msgrcv,
RECORD_MSGRCV>: Pass a signed variable to
regcache_raw_read_signed, instead of an unsigned one.

remote-notif.[h|c]:notif_debug: Change type to int.

notif_debug is installed as variable of a "signed" command:

  add_setshow_boolean_cmd ("notification", no_class, &notif_debug,
                           _("\

and:

command.h:extern void add_setshow_boolean_cmd (char *name,
command.h-                                   enum command_class class,
command.h-                                   int *var,

2013-03-07  Pedro Alves  <palves@redhat.com>

* remote-notif.c (notif_debug): Change type to int.
* remote-notif.h (notif_debug): Likewise.

ser-tcp.c:tcp_retry_limit: Change type to unsigned int.

tcp_retry_limit is installed as variable of an unsigned command:

  add_setshow_uinteger_cmd ("connect-timeout", class_obscure,
                            &tcp_retry_limit, _("\

and I found no uses of the variable treating it as signed (like < 0
checks or some such).

2013-03-07  Pedro Alves  <palves@redhat.com>

* ser-tcp.c (tcp_retry_limit): Change type to unsigned int.

hex2bin, bin2hex: move declarations to header.

Move the declarations to a header, rather than declaring them in
(multiple) .c files.

gdb/
2013-03-07  Pedro Alves  <palves@redhat.com>

* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.

gdb/gdbserver/
* tracepoint.c (cur_action, cur_step_action): Make them unsigned.
(cmd_qtfp): Initialize cur_action and cur_step_action 0 instead
of -1.
(cmd_qtsp): Adjust condition.  Do post increment.
Set cur_action and cur_step_action back to 0.

* utils.c (initialize_utils): Improve doc strings of "set/show
width", "set/show height", and "set/show pagination".

PR gdb/15236: gdbserver write to linux memory with zero length corrupts stack

PROBLEM:

The function linux_write_memory () in linux-low.c allocates a buffer
on the stack to hold a copy of the data to be written.

  register PTRACE_XFER_TYPE *buffer = (PTRACE_XFER_TYPE *)
    alloca (count * sizeof (PTRACE_XFER_TYPE));

"count" is the number of bytes to be written, rounded up to the
nearest multiple of sizeof (PTRACE_XFER_TYPE) and allowing for not
being an aligned address. The function later uses

  buffer[0] = ptrace (PTRACE_PEEKTEXT, pid,
                      (PTRACE_ARG3_TYPE) (uintptr_t) addr, 0);

The problem is that this function can be called to write zero bytes on
an aligned address, for example when receiving an X packet of length 0
(used to test if 8-bit write is supported). Under these circumstances,
count can be zero.

Since in this case, buffer[0] may never have been allocated, the stack
is corrupted and gdbserver may crash.

SOLUTION:

Writing zero bytes should always succeed. The patch below returns
successfully early if the length is zero, so avoiding the stack
corruption.

Verified on the ARC GDB 7.5.1 port.

2013-03-07  Jeremy Bennett  <jeremy.bennett@embecosm.com>

PR server/15236

* linux-low.c (linux_write_memory): Return early success if LEN is
zero.

* testsuite/discard_locals_relocatable_test.c: Add a powerpc
relocation referencing .LC0.
* testsuite/discard_locals_test.sh: Remove FIXMEs.

* testsuite/ifunc-sel.h (ifunc_sel, ifunc_one): Mark
always_inline.  Add assembly for powerpc to avoid GOT.

* testsuite/script_test_10.sh: Don't test .bss section
header number.

* ax-gdb.c (gen_printf): Make FORMAT const.
* ax-gdb.h (gen_printf): Likewise.
* ax-general.c (ax_string): Make STR const.
* ax.h (ax_string): Likewise.

*** empty log message ***