nv50: add PIPELINE_STATISTICS query support, based on nvc0

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Nick Tenney <nick.tenney@gmail.com>

svga: add missing :

Fixes: 924ee3f408 ("gallium: add shader cap for dldexp/dfracexp support")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir/GCM: Pull unpinned instructions out of blocks while pinning

This lets us be slightly more efficient by not walking the CFG extra times.
Also, it may make it easier to ensure that GVN happens on only unpinned
instructions.

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/GCM: Use pass_flags instead of bitsets for tracking visited/pinned

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Add a global code motion (GCM) pass

v2 Jason Ekstrand <jason.ekstrand@intel.com>:
 - Use nir_dominance_lca for computing least common anscestors
 - Use the block index for comparing dominance tree depths
 - Pin things that do partial derivatives

Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/instr: Change "live" to a more generic "pass_flags" field

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Make nir_[cf_node/instr]_[prev/next] return null if at the end

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/from_ssa: Don't try to read an invalid instruction

Right now, the nir_instr_prev function function blindly looks up the
previous element in the exec list and casts it to an instruction even if
it's the tail sentinel.  The next commit will change this to return null if
it's the first instruction.  Making this change first avoids getting a
segfault between commits.  The only reason we never noticed is that, thanks
to the way things are laid out in nir_block, the casted instruction's type
was never parallal_copy.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/validate: Validate SSA defs the same way we do for registers

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/validate: Validate if_uses on registers

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Properly clean up CF nodes when we remove them

Previously, if you remved a CF node that still had instructions in it, none
of the use/def information from those instructions would get cleaned up.
Also, we weren't removing if statements from the if_uses of the
corresponding register or SSA def.  This commit fixes both of these
problems

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: use nir_foreach_ssa_def for indexing ssa defs

This is both simpler and more correct.  The old code didn't properly index
load_const instructions.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/from_ssa: Use the nir_block_dominance function instead of our own

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/dominance: Add a constant-time mechanism for comparing blocks

This is mostly thanks to Connor.  The idea is to do a depth-first search
that computes pre and post indices for all the blocks.  We can then figure
out if one block dominates another in constant time by two simple
comparison operations.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/dominance: Expose the dominance intersection function

Being able to find the least common anscestor in the dominance tree is a
useful thing that we may want to do in other passes.  In particular, we
need it for GCM.

v2: Handle NULL inputs by returning the other block

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

st/mesa: lower DFRACEXP/DLDEXP when they are not supported

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

st/mesa: disable lowering of dops to dfrac when dround is available

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

st/mesa: add support for new double opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add shader cap for dldexp/dfracexp support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add a cap to enable double rounding opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: add some more double opcodes to avoid unnecessary lowering

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

docs/GL3.txt: softpipe now supports GL_ARB_gpu_shader_fp64

Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: add st fp64 support (v7.1)

This adds support to the state tracker for
ARB_gpu_shader_fp64.

The details are explained in comments
within the code.

v2 : add double to int/unsigned conversion
v3: handle fp64 consts better
v4: use DRSQ
v4.1: add d2b
v4.2: drop DDIV

v5: split out some prep patches.
v5.1: add some comments.
v5.2: more comments

v6: simplify down the double instruction
    generation loop.

v7: Merge Ilia's two cleanup patches.
v7.1: minor fixups for Ilia patch + cleanups

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/st_tgsi_to_glsl: prepare add_constant for fp64

This just moves stuff around a little to make the next patch
cleaner.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/glsl_to_tgsi: convert dst to an array

This is just prep work for fp64 support where we need
an array of 2 dst values.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965: just avoid warnings with fp64

This just fills in some blanks to avoid warnings in the i965 driver.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: Add compute to _mesa_shader_stage_to_string(); use unreachable.

This is basically Ian's review feedback for my patch that added
_mesa_shader_stage_to_abbrev() - it just makes both consistent again.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/vec4: Print "VS" or "GS" when compiles fail, not "vec4".

This is now trivial to do right.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/vec4: Replace debug_flag with debug_enabled.

backend_visitor now handles this, so we can delete the vec4_visitor
specific code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Make scheduler cycle estimates use the proper stage name.

Previously, the vec4 backend labeled shaders as "vec4" - now it uses the
specific names "VS" and "GS".

The FS backend now correctly prints "VS" for vertex shaders (rather than
"fs").  It also prints "FS" instead of "fs" for fragment shaders;
preserving that behavior didn't seem essential.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Un-hardcode DEBUG_WM, "FS", and "fragment".

These code paths can (or will) be used for other shader stages.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Create backend_visitor fields for debugging messages.

We introduce three new fields in backend_visitor:
- debug_enabled: whether or not INTEL_DEBUG & DEBUG_<stage flag>
- stage_name: "vertex", "fragment", etc. for use in messages
- stage_abbrev: "VS", "FS", etc. for use in messages

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Add a function to translate MESA_SHADER_* into DEBUG_* enums.

When compiling, we have a gl_shader_stage (MESA_SHADER_*) enum, and want
to know whether debugging is enabled for that stage.  This allows us to
easily translate it into the corresponding debug flag.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: Create a _mesa_shader_stage_to_abbrev() function.

This is similar to _mesa_shader_stage_to_string(), but returns "VS"
instead of "vertex".

v2: Use unreachable() and add MESA_SHADER_COMPUTE (requested by Ian).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Use VARYING_SLOT checks rather than strcmp().

Comparing the location field is equivalent and more efficient.

We'll also need this when we start using NIR for ARB programs, as our
NIR converter will set the location field correctly, but probably won't
use the GLSL names for these concepts.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/fs: Remove type parameter from emit_vs_system_value().

Every VS system value has type D.  We can always add this back if that
changes, but for now, it's extra typing.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: add lowering for double divide to rcp/mul

It looks like no hw does div anyways, so we should just
lower at the GLSL level.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

softpipe/tgsi: expose doubles for softpipe.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

tgsi: add support for flt64 constants

These act like flt32 except they take up two slots, and you
can only add 2 x flt64 constants in one slot.

The main reason they are different is we don't want to match half a flt64
constants against a flt32 constant in the matching code, we need to make
sure we treat both parts of the flt64 as an single structure.

Cleaned up printing/parsing by Ilia Mirkin <imirkin@alum.mit.edu>

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium: add double opcodes and TGSI execution (v4.2)

This patch adds support for a set of double opcodes
to TGSI. It is an update of work done originally
by Michal Krol on the gallium-double-opcodes branch.

The opcodes have a hint where they came from in the
header file.

v2: add unsigned/int <-> double
v2.1:  update docs.

v3: add DRSQ (Glenn), fix review comments (Glenn).

v4: drop DDIV
v4.1: cleanups, fix some docs bugs, (Ilia)
      rework store_dest and fetch_source fns. (Ilia)
4.2: fixup float comparisons (Ilia)

This is based on code by Michael Krol <michal@vmware.com>

Roland and Glenn also reviewed earlier versions.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/util: indentation fix

st/mesa: add GSL_TYPE_DOUBLE, new ir_unop_* switch cases

To silence compiler warnings about unhandled switch cases.
v2: move GSL_TYPE_DOUBLE case to the "Invalid type in type_size" section,
per Ilia.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir: add missing GLSL_TYPE_DOUBLE case in type_size()

To silence compiler warning about unhandled switch case.
v2: move GLSL_TYPE_DOUBLE to the "not reached" section, per Ilia.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: fix sampler view reference counting bug in glDraw/CopyPixels

Use pipe_sampler_view_reference() instead of ordinary assignment.
Also add a new sanity check assertion.

Fixes piglit gl-1.0-drawpixels-color-index test crash.  But note
that the test still fails.

Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

swrast: fix multiple color buffer writing

If a fragment program wrote to more than one color buffer, the
first fragment color got replicated to all dest buffers.  This
fixes 5 piglit FBO tests, including fbo-drawbuffers-arbfp.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45348
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: remove unused _math_trans_4chan()

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

install-lib-links: don't depend on .libs directory

This snippet can be included in Makefiles that may, depending on the
project configuration, not actually build any installable libraries.

In that case we don't have anything to depend on and this part of
the makefile may be executed before the .libs directory is created,
so do not depend on it being there.

Cc: "10.3 10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

i965/vec4: Calculate register allocation q values manually.

This fixes a regression in the running time of Piglit introduced by
commit 78e9043475d4bed8b50f7e413963c960fa0935bb, which increased the
number of register allocation classes set up by the VEC4 back-end
from 2 to 16.  The algorithm used by ra_set_finalize() to calculate
them is unnecessarily expensive, do it manually like the FS back-end
does.

Reported-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Don't compact instructions with unmapped bits.

Some instruction bits don't have a mapping defined to any compacted
instruction field.  If they're ever set and we end up compacting the
instruction they will be forced to zero.  Avoid using compaction in such
cases.

v2: Align multiple lines of an expression to the same column.  Change
    conditional compaction of 3-source instructions to an
    assertion. (Matt)
v3: The 3-source instruction bit 105 is part of SourceIndex on CHV.
    Add assertion that reserved bit 7 is not set. (Matt)
    Document overlap with UIP and 64-bit immediate fields.
v4: Make some more unmapped bit checks assertions. (Matt)

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Handle F16TO32/F32TO16 with dword src/dst consistently on both back-ends.

Due to the way it's implemented in hardware, the F16TO32/F32TO16
instructions require the source/destination register to be of some
16-bit type in Align1 mode, while they require it to be some 32-bit
type in Align16 mode (and as an undocumented feature the high 16 bits
of the destination register are zeroed out in the case of the F32TO16
instruction on Gen7).  Make their behaviour consistent so you can
specify a 32 bit register type as source or destination and get
predictable results in the most significant bits no matter what access
mode is being used.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/gen8: Fix F32TO16 in vec4 mode if the source and destination registers alias.

We cannot zero out the destination register if it overlaps with the
source.  Use an Align1 instruction instead to zero out the high 16
bits after the conversion to half float.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: Replace ud_reg_to_w() with a more general helper function.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Don't attempt to reduce swizzles of send from GRF instructions.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Fix constant propagation across different types.

If the source type differs from the original type of the constant we
need to bit-cast it before propagating, otherwise the original type
information will be lost.  If the constant was a vector float there
isn't much we can do, because the result of bit-casting the component
values of a vector float cannot itself be represented as an immediate.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: A shader cannot redefine or overload built-in functions in GLSL ES 3.00

Create a new search function to look for matching built-in functions by name
and use it for built-in function redefinition or overload in GLSL ES 3.00.

GLSL ES 3.0 spec, chapter 6.1 "Function Definitions", page 71

  "A shader cannot redefine or overload built-in functions."

While in GLSL ES 1.0 specification, chapter 8 "Built-in Functions"

  "User code can overload the built-in functions but cannot redefine them."

So this check is specific to GLSL ES 3.00.

This patch fixes the following dEQP tests:

dEQP-GLES3.functional.shaders.functions.invalid.overload_builtin_function_vertex
dEQP-GLES3.functional.shaders.functions.invalid.overload_builtin_function_fragment
dEQP-GLES3.functional.shaders.functions.invalid.redefine_builtin_function_vertex
dEQP-GLES3.functional.shaders.functions.invalid.redefine_builtin_function_fragment

No piglit regressions.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Adds check for integer internal format and num samples in glRenderbufferStorageMultisample

Per GLES3 specification, section 4.4 Framebuffer objects page 198, "If
internalformat is a signed or unsigned integer format and samples is greater
than zero, then the error INVALID_OPERATION is generated.".

Fixes 1 dEQP test:
* dEQP-GLES3.functional.negative_api.buffer.renderbuffer_storage_multisample

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Returns correct error values from gl(Get)SamplerParameter*() on GL-ES 3.0+

'3.8.2 Sampler Objects' section of the GL-ES 3.0 specification states:

    "An INVALID_OPERATION error is generated if sampler is not the name
    of a sampler object previously returned from a call to GenSamplers."

In desktop GL, an GL_INVALID_VALUE is returned instead.

Fixes 6 dEQP failing tests:
* dEQP-GLES3.functional.negative_api.shader.get_sampler_parameteriv
* dEQP-GLES3.functional.negative_api.shader.get_sampler_parameterfv
* dEQP-GLES3.functional.negative_api.shader.sampler_parameteri
* dEQP-GLES3.functional.negative_api.shader.sampler_parameteriv
* dEQP-GLES3.functional.negative_api.shader.sampler_parameterf
* dEQP-GLES3.functional.negative_api.shader.sampler_parameterfv

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: remove bogus 'd' constant qualifiers

0.0 is a double anyways. Apparently my version of gcc was happy with
0.0d as well, but this is not true of all compilers.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89218

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: don't die for ETC2 formats when no driver support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir: Add an ALU op builder kind of like ir_builder.h

v2: Rebase on the nir_opcodes.h python code generation support.
v3: Use SSA values, and set an appropriate writemask on dot products.
v4: Make the arguments be SSA references as well.  This lets you stack up
    expressions in the arguments of other expressions, at the cost of
    having to insert a fmov/imov if you want to swizzle.  Also, add
    the generated file to NIR_GENERATED_FILES.
v5: Use more pythonish style for iterating the list.
v6: Infer the size of the dest from the size of the srcs, and auto-swizzle
    a single small src out to the appropriate size.
v7: Add little helpers for initializing the struct, add a typedef for the
    struct like other nir types have.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v6)
Reviewed-by: Connor Abbott <cwabbott0@gmail.com> (v7)

docs: mark ARB_gpu_shader_fp64 as done in core

No driver support... yet. But core is ready.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/tests: add DOUBLE types

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

glsl: add a lowering pass for frexp/ldexp with double arguments

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

glsl: lower double optional passes (v2)

These lowering passes are optional for the backend to request, currently
the TGSI softpipe backend most likely the r600g backend would want to use
these passes as is. They aim to hit the gallium opcodes from the standard
rounding/truncation functions.

v2: also lower floor in mod_to_floor

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: implement double builtin functions

This implements the bulk of the builtin functions for fp64 support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/lower_instructions: add double lowering passes

This lowers double dot product and lrp to fma.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: enable/disable certain lowering passes for doubles

We want to restrict some lowering passes to floats only,
and enable other for doubles.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: validate output types for shader stages

Patch fixes Piglit test:
   arb_gpu_shader_fp64/preprocessor/fs-output-double.frag

and adds additional validation for shader outputs.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: add double support to lower_mat_op_to_vec

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Linking support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Support double loop control

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Support double inouts

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/lexer: Support double floats

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/parser: Support double floats

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ast: Support double floats

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Add ubo lowering support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Add support doubles in optimization passes

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ir: Add builder support for functions with double floats

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ir: Add builtin constant function support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ir: Add cloning support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ir: Add printing support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl/ir: Add builtin function support for doubles

v2: add d2b, more ir_constant stuff (Ilia)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: fix uniform linking logic in the presence of structs

Add a enter/leave record callback so that the offset may be aligned to
the proper value. Otherwise only leaf fields are called, and the first
field needs to be aligned to the outer struct's base alignment while the
last field needs to be aligned to the inner struct's base alignment.

This removes most usage of the last field/record type values passed into
visit_field.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

glsl: teach std140_base_alignment about samplers

These functions are about to be used more aggressively for determining
uniform layout. Samplers may be inside of structs, and it's easier to
reuse the existing base alignment logic.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>

glsl: Uniform linking support for doubles

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Add double builtin type generation

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: add ARB_gpu_shader_fp64 to the glsl extensions. (v2)

v2: add define bit (Tapani Pälli)

Patch makes following Piglit tests pass:
   arb_gpu_shader_fp64/preprocessor/define.vert
   arb_gpu_shader_fp64/preprocessor/define.frag

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: add double uniform support. (v5)

This adds support for the new uniform interfaces
from ARB_gpu_shader_fp64.

v2:
support ARB_separate_shader_objects ProgramUniform*d* (Ian)
don't allow boolean uniforms to be updated (issue 15) (Ian)

v3: fix size_mul
v4: Teach uniform update to take into account double precision (Topi)
v5: add transpose for double case (Ilia)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glsl: Add double builtin type

This causes a lot of warnings about unchecked type in
switch statements - fix them later.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: add ARB_gpu_shader_fp64 extension info (v2)

This just adds the entries to extensions.c and mtypes.h

v2: use core profile only (Ian)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

glapi: add ARB_gpu_shader_fp64 (v2)

Just add the xml file covering this extension,
and dummy interface files in mesa, and fix up
sanity tests.

v2:
Enable ProgramUniform*d* from ARB_separate_shader_objects (Ian)
use 40 instead of 43 for dispatch_sanity.cpp (Chris)
uncomment PU sanity tests.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno: add missing PIPE_CAP_RESOURCE_FROM_USER_MEMORY to switch

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: add ARB_instanced_arrays support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: add support for vertexid and instanceid sysvals

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno: pass number of instances to draw

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: add ETC2 decoding support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: pass etc2 textures to driver if supported

If the driver actually supports ETC2, don't decode it in software.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

llvmpipe,softpipe: only support ETC1, not the upcoming ETC2

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gallium: add ETC2 format support

No actual decoding is added, similar faking mechanism to bptc.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

freedreno/a3xx: add hardware ETC1 support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>