mesa.git
6 years agowinsys/radeon: implement and enable 32-bit VM allocations
Marek Olšák [Sun, 31 Dec 2017 21:34:45 +0000 (22:34 +0100)]
winsys/radeon: implement and enable 32-bit VM allocations

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
6 years agowinsys/radeon: add struct radeon_vm_heap
Marek Olšák [Sun, 31 Dec 2017 21:02:35 +0000 (22:02 +0100)]
winsys/radeon: add struct radeon_vm_heap

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
6 years agowinsys/amdgpu: enable 32-bit VM allocations
Marek Olšák [Sun, 31 Dec 2017 20:36:37 +0000 (21:36 +0100)]
winsys/amdgpu: enable 32-bit VM allocations

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
6 years agogallium/radeon: add 32-bit address space heaps
Marek Olšák [Sun, 31 Dec 2017 20:32:36 +0000 (21:32 +0100)]
gallium/radeon: add 32-bit address space heaps

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
6 years agoac: query high bits of 32-bit address space
Marek Olšák [Fri, 2 Feb 2018 17:22:15 +0000 (18:22 +0100)]
ac: query high bits of 32-bit address space

6 years agogallium: use PIPE_CAP_CONSTBUF0_FLAGS
Marek Olšák [Sat, 27 Jan 2018 01:05:23 +0000 (02:05 +0100)]
gallium: use PIPE_CAP_CONSTBUF0_FLAGS

6 years agogallium: allow drivers to impose BO flags restrictions on constant buffer 0
Marek Olšák [Sat, 27 Jan 2018 00:52:08 +0000 (01:52 +0100)]
gallium: allow drivers to impose BO flags restrictions on constant buffer 0

Required by radeonsi for optimal behavior.

6 years agomeson: Add Haiku platform support v4
Alexander von Gluck IV [Fri, 16 Feb 2018 22:56:31 +0000 (16:56 -0600)]
meson: Add Haiku platform support v4

Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
6 years agoanv/icl: Add render target flush after uploading binding table
Anuj Phogat [Thu, 15 Feb 2018 23:35:42 +0000 (15:35 -0800)]
anv/icl: Add render target flush after uploading binding table

The PIPE_CONTROL command description says:

"Whenever a Binding Table Index (BTI) used by a Render Taget Message
points to a different RENDER_SURFACE_STATE, SW must issue a Render
Target Cache Flush by enabling this bit. When render target flush
is set due to new association of BTI, PS Scoreboard Stall bit must
be set in this packet."

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Enable float blend optimization
Anuj Phogat [Tue, 13 Feb 2018 21:48:34 +0000 (13:48 -0800)]
anv/icl: Enable float blend optimization

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Use gen11 functions
Anuj Phogat [Fri, 26 May 2017 19:32:23 +0000 (12:32 -0700)]
anv/icl: Use gen11 functions

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Build anv libs for gen11
Anuj Phogat [Fri, 26 May 2017 18:10:26 +0000 (11:10 -0700)]
anv/icl: Build anv libs for gen11

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Generate gen11 entry point functions
Anuj Phogat [Fri, 26 May 2017 19:31:58 +0000 (12:31 -0700)]
anv/icl: Generate gen11 entry point functions

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Don't use DISPATCH_MODE_SIMD4X2
Anuj Phogat [Fri, 26 May 2017 22:40:55 +0000 (15:40 -0700)]
anv/icl: Don't use DISPATCH_MODE_SIMD4X2

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Don't use SingleVertexDispatch
Anuj Phogat [Fri, 26 May 2017 22:42:02 +0000 (15:42 -0700)]
anv/icl: Don't use SingleVertexDispatch

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Don't set ResetGatewayTimer
Anuj Phogat [Fri, 26 May 2017 22:37:03 +0000 (15:37 -0700)]
anv/icl: Don't set ResetGatewayTimer

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Add #define genX
Anuj Phogat [Fri, 26 May 2017 17:57:45 +0000 (10:57 -0700)]
anv/icl: Add #define genX

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoanv/icl: Add gen11 mocs defines
Anuj Phogat [Fri, 26 May 2017 17:55:22 +0000 (10:55 -0700)]
anv/icl: Add gen11 mocs defines

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoi965: Implement GenerateMipmap directly, rather than using Meta.
Kenneth Graunke [Sun, 19 Jun 2016 06:05:51 +0000 (23:05 -0700)]
i965: Implement GenerateMipmap directly, rather than using Meta.

Meta is awful and we'd like to stop using it.  Implementing this using
BLORP allows us to stop trashing a bunch of GL state every time.

This follows the structure of st_generate_mipmap().
compute_num_levels is lifted directly from there.

Improves performance in Gl41HdrBloom by about 11.794% +/- 1.01919% (n=3)
on Kabylake GT2 at 1280x720 (the difference seems much smaller at higher
resolutions).

v2 (idr): Don't try depth or depth-stencil blorp blits on Gen4 or Gen5
because it's not implemented yet.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
6 years agomesa: Move compute_num_levels from st_gen_mipmap.c to mipmap.c.
Kenneth Graunke [Sun, 19 Jun 2016 07:36:48 +0000 (00:36 -0700)]
mesa: Move compute_num_levels from st_gen_mipmap.c to mipmap.c.

I want to use compute_num_levels inside i965.  Rather than duplicating
it, move it from mesa/st to core Mesa, and make it non-static.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
6 years agomeson: freedreno depends on nir
Dylan Baker [Fri, 16 Feb 2018 17:07:25 +0000 (09:07 -0800)]
meson: freedreno depends on nir

This fixes a race condition in building targets that link in freedreno.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105120
Fixes: 0bbecc5a8548883f76a7 ("meson: define driver dependencies")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Mark Janes <mark.a.janes@intel.com>
6 years agoswr/rast: blend_epi32() should return Integer, not Float
George Kyriazis [Tue, 13 Feb 2018 16:41:48 +0000 (10:41 -0600)]
swr/rast: blend_epi32() should return Integer, not Float

fix gcc8 compiler error for KNL.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105029
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Normalize path for debug metadata
George Kyriazis [Tue, 13 Feb 2018 18:53:39 +0000 (12:53 -0600)]
swr/rast: Normalize path for debug metadata

in template gen_llvm.hpp

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Consolidate archrast Draw events
George Kyriazis [Mon, 12 Feb 2018 23:54:30 +0000 (17:54 -0600)]
swr/rast: Consolidate archrast Draw events

Consolidate archrst draw events into single draw event with an attribute
that represents the type of draw

- Add handlers for new private proto versions of DrawInstancedEvent,
  DrawIndexedInstancedEvent, DrawInstancedSplitEvent, and
  DrawIndexedInstancedSplitEvent
- Convert the draw events to generic DrawInfoEvents
- parse_proto_event_fields() replaces 'AR_DRAW_TYPE' as a field type with
  'uint32_t'. This draw type is actually an enum, but can be represented
  as an unsigned integer.
- is_draw_or_dispatch() recognizes DrawInfoEvent as a draw event

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Add semantics for translating address
George Kyriazis [Fri, 9 Feb 2018 20:04:14 +0000 (14:04 -0600)]
swr/rast: Add semantics for translating address

Added support for another full translation path in fetch jitter.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Convert C Sampler intrinsics
George Kyriazis [Fri, 9 Feb 2018 17:37:17 +0000 (11:37 -0600)]
swr/rast: Convert C Sampler intrinsics

Convert portions of the C sampler to the rasty SIMD lib.

Also fix SRL call with a non-immediate.  Don't count on the compiler
automagically converting an srli call to srl if the shift count isn't
an immediate.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Make SIMDLib templated types easier to use
George Kyriazis [Wed, 7 Feb 2018 22:51:41 +0000 (16:51 -0600)]
swr/rast: Make SIMDLib templated types easier to use

"typename SIMD_T::TypeName" --> "TypeName<SIMD_T>"

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Be more explicit when fetching next component
George Kyriazis [Wed, 7 Feb 2018 07:02:00 +0000 (01:02 -0600)]
swr/rast: Be more explicit when fetching next component

Use a new function to denote that we want to get offset to next component
and hide the fact that GEP is used underneath.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Fix bug related to passing AR handle
George Kyriazis [Wed, 7 Feb 2018 06:39:54 +0000 (00:39 -0600)]
swr/rast: Fix bug related to passing AR handle

We were passing a garbage handle. Let's not do that.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Fix primitive replication issue in tesselation PA.
George Kyriazis [Tue, 6 Feb 2018 23:28:12 +0000 (17:28 -0600)]
swr/rast: Fix primitive replication issue in tesselation PA.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Use llvm intrinsic masked gather
George Kyriazis [Fri, 2 Feb 2018 23:03:01 +0000 (17:03 -0600)]
swr/rast: Use llvm intrinsic masked gather

Use llvm intrinsic masked.gather instead of manual unroll for the cases
where we have vector of pointers.  Improves llvm IR debug experience by
reducing a ton of IR to a single intrinsic call. Also seems to reduce
overall stack use considerably.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Misc cleanup
George Kyriazis [Fri, 2 Feb 2018 07:12:29 +0000 (01:12 -0600)]
swr/rast: Misc cleanup

Together with correct detection of clipDistance NaNs when no cullDistance is set

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Renamed variable in vertexbufferstate
George Kyriazis [Fri, 2 Feb 2018 04:12:22 +0000 (22:12 -0600)]
swr/rast: Renamed variable in vertexbufferstate

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Fix GATHERPS to avoid assertions.
George Kyriazis [Mon, 12 Feb 2018 19:38:45 +0000 (13:38 -0600)]
swr/rast: Fix GATHERPS to avoid assertions.

With the pBase type change, LLVM was asserting because of wrong types.
Cast appropriately.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: More precise user clip distance interpolation
George Kyriazis [Fri, 2 Feb 2018 01:28:58 +0000 (19:28 -0600)]
swr/rast: More precise user clip distance interpolation

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Cull prims when all verts have negative clip distances
George Kyriazis [Thu, 1 Feb 2018 23:43:04 +0000 (17:43 -0600)]
swr/rast: Cull prims when all verts have negative clip distances

Performance optimization, and fixes some clipping issues.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: whitespace and comment cleanup
George Kyriazis [Thu, 1 Feb 2018 21:37:36 +0000 (15:37 -0600)]
swr/rast: whitespace and comment cleanup

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Fix invalid number of attributes
George Kyriazis [Wed, 31 Jan 2018 23:07:59 +0000 (17:07 -0600)]
swr/rast: Fix invalid number of attributes

Fix invalid number of attributes passed into tesselation PA.
Needs to take into account any offsets from the shader.
Innocuous issue, but removes an assert firing in debug.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Add clipper stats.
George Kyriazis [Wed, 31 Jan 2018 19:22:19 +0000 (13:22 -0600)]
swr/rast: Add clipper stats.

Clipper event is now:

event ClipperEvent
{
    uint32_t drawId;
    uint32_t trivialRejectCount;
    uint32_t trivialAcceptCount;
    uint32_t mustClipCount;
};

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Separate event types to public and private
George Kyriazis [Wed, 31 Jan 2018 07:09:53 +0000 (01:09 -0600)]
swr/rast: Separate event types to public and private

Split into two proto files and modify appropriate build rules for
configure / scons / meson builds.

There are private internal events (proxy) that communicate information
from rasterizer to ArchRast. ArchRast can use these events to calculate
a final answer and then emit other public events which will be saved to
file. Users will use the public proto file and not the private one.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Clean up event types and remove BE events
George Kyriazis [Wed, 31 Jan 2018 06:18:32 +0000 (00:18 -0600)]
swr/rast: Clean up event types and remove BE events

Begin/End events not needed anymore.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Removed unused variable
George Kyriazis [Wed, 7 Feb 2018 01:42:06 +0000 (19:42 -0600)]
swr/rast: Removed unused variable

Gets rid of zillions of unused variable warnings, made worse by templates.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Separate RDTSC code from archrast
George Kyriazis [Tue, 30 Jan 2018 23:29:48 +0000 (17:29 -0600)]
swr/rast: Separate RDTSC code from archrast

Renamed rdstc defines more appropriately

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Cleanup of mpPrivateContext in Builder
George Kyriazis [Mon, 29 Jan 2018 18:41:20 +0000 (12:41 -0600)]
swr/rast: Cleanup of mpPrivateContext in Builder

Provide access functions for mpPrivateContext in Builder.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Remove some JIT debug code
George Kyriazis [Sat, 27 Jan 2018 06:19:07 +0000 (00:19 -0600)]
swr/rast: Remove some JIT debug code

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Don't include private context in gather args
George Kyriazis [Sat, 27 Jan 2018 01:20:41 +0000 (19:20 -0600)]
swr/rast: Don't include private context in gather args

Move mpPrivateContext to compensate

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Cleanup knob definitions
George Kyriazis [Fri, 26 Jan 2018 22:01:56 +0000 (16:01 -0600)]
swr/rast: Cleanup knob definitions

Rename some of the categories and move some options around.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoswr/rast: Add missing parameter to a few gather functions
George Kyriazis [Thu, 25 Jan 2018 03:54:46 +0000 (21:54 -0600)]
swr/rast: Add missing parameter to a few gather functions

We now pass pDrawContext as a default parameter

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
6 years agoetnaviv: add useful information to BO import errors
Philipp Zabel [Mon, 12 Feb 2018 14:25:26 +0000 (15:25 +0100)]
etnaviv: add useful information to BO import errors

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
6 years agoegl/wayland: Always use in-tree wayland-egl-backend.h
Daniel Stone [Thu, 15 Feb 2018 09:17:52 +0000 (09:17 +0000)]
egl/wayland: Always use in-tree wayland-egl-backend.h

A recent patchset to Wayland[0] migrated Mesa's libwayland-egl backend
into Wayland itself, so implementations could provide backends. Mesa
still uses its own, and the two have already diverged[1].

The include from egl_dri2.h could pick up either the installed Wayland
wayland-egl-backend.h (with a 'driver_private' member), or the Mesa
internal wayland-egl-backend.h (with a 'private' member), failing the
build in the first instance.

Add an explicit directory prefix to the include, so we always get our
in-tree version.

[0]: https://patchwork.freedesktop.org/series/31663/
[1]: https://cgit.freedesktop.org/wayland/wayland/commit/?id=9fa60983b579

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105103
Fixes: 198af27c679c ("wayland-egl: rename wayland-egl-{priv,backend}.h")
6 years agomeson: Move Wayland dmabuf to wayland-drm
Daniel Stone [Thu, 25 Jan 2018 08:29:38 +0000 (08:29 +0000)]
meson: Move Wayland dmabuf to wayland-drm

As the comment notes: linux-dmabuf has nothing to do with wayland-drm,
but we need a single place to build these files we can use from both EGL
and Vulkan, which is guaranteed to be included before both EGL and
Vulkan WSI.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>
6 years agoegl/wayland: check for invalid format index
Eric Engestrom [Thu, 15 Feb 2018 11:10:22 +0000 (11:10 +0000)]
egl/wayland: check for invalid format index

v2: just tell the compiler to assume the format will always be found, as
it comes from the table itself to begin with. (DanielS)

CID: 1429516
Fixes: d32b23f3830099a328b91 "egl/wayland: Add bpp to visual map"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
6 years agoglsl: fix sizeof(pointer) bug
Eric Engestrom [Thu, 15 Feb 2018 10:59:24 +0000 (10:59 +0000)]
glsl: fix sizeof(pointer) bug

Doesn't really change anything to the test though ¯\_(ツ)_/¯

CID: 1429511
Fixes: e8495646afb06a9dd7786 "glsl/tests: changes to test_disk_cache_create test"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
6 years agoradeonsi/nir: set TGSI_PROPERTY_FS_EARLY_DEPTH_STENCIL correctly
Timothy Arceri [Thu, 15 Feb 2018 04:08:49 +0000 (15:08 +1100)]
radeonsi/nir: set TGSI_PROPERTY_FS_EARLY_DEPTH_STENCIL correctly

We set this for post_depth_coverage in addition to early_fragment_tests.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
6 years agovirgl: remap query types to hw support.
Dave Airlie [Wed, 14 Feb 2018 02:52:27 +0000 (12:52 +1000)]
virgl: remap query types to hw support.

The gallium query types changed, so we need to remap from the
gallium ones to the virgl ones.

Fixes:
dEQP-GLES3.functional.transform_feedback.basic_types*

"This also fixes:

dEQP-GLES3.functional.transform_feedback.array.separate*
dEQP-GLES3.functional.transform_feedback.array_element*
dEQP-GLES3.functional.transform_feedback.interpolation.*

Gallium's p_defines.h and virglrenderer's p_defines.h have diverged
quite a bit, so not including
PIPE_QUERY_OCCLUSION_PREDICATE_CONSERVATIVE there makes sense for now."
 - Gurchetan Singh

Fixes: 3f6b3d9db (gallium: add PIPE_QUERY_OCCLUSION_PREDICATE_CONSERVATIVE)
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Tested-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
6 years agoi965/icl: Add render target flush after uploading binding table
Anuj Phogat [Wed, 17 Jan 2018 22:33:17 +0000 (14:33 -0800)]
i965/icl: Add render target flush after uploading binding table

From PIPE_CONTROL command description in gfxspecs:

"Whenever a Binding Table Index (BTI) used by a Render Taget Message
 points to a different RENDER_SURFACE_STATE, SW must issue a Render
 Target Cache Flush by enabling this bit. When render target flush
 is set due to new association of BTI, PS Scoreboard Stall bit must
 be set in this packet."

V2: Move the PIPE_CONTROL to update_renderbuffer_surfaces() in
    brw_wm_surface_state.c (Ken).

Fixes a fulsim error and a GPU hang described in below JIRA.
JIRA: MD5-322
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Enable float blend optimization and Wa3DStateMode
Anuj Phogat [Fri, 3 Nov 2017 21:48:29 +0000 (14:48 -0700)]
i965/icl: Enable float blend optimization and Wa3DStateMode

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agointel/common/icl: Add has_sample_with_hiz flag in gen_device_info
Anuj Phogat [Wed, 14 Feb 2018 22:30:27 +0000 (14:30 -0800)]
intel/common/icl: Add has_sample_with_hiz flag in gen_device_info

Sampling from hiz is enabled in i965 for GEN9+ but this feature has
been removed from gen11. So, this new flag will be useful to turn
the feature on/off for different gen h/w. It will be used later
in a patch adding device info for gen11.

Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Add assertions to check dispatch mode is SIMD8
Anuj Phogat [Wed, 7 Feb 2018 00:47:04 +0000 (16:47 -0800)]
i965/icl: Add assertions to check dispatch mode is SIMD8

SIMD4x2 dispatch mode has been removed in GEN11. We're not using
it anyways in Mesa. Adding few asserts to make it explicit.

Use GEN_GEN macro in place of devinfo->gen (Ken)

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Update switch statements
Anuj Phogat [Fri, 18 Aug 2017 19:11:38 +0000 (12:11 -0700)]
i965/icl: Update switch statements

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Update the assert in brw_memory_barrier()
Anuj Phogat [Thu, 20 Jul 2017 23:21:03 +0000 (16:21 -0700)]
i965/icl: Update the assert in brw_memory_barrier()

Nothing is changed here from gen10 to gen11. So, just update
the assert.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Define and use icl mocs settings
Anuj Phogat [Wed, 10 May 2017 17:49:04 +0000 (10:49 -0700)]
i965/icl: Define and use icl mocs settings

Gen11 MOCS settings are duplicate of Gen10 MOCS settings.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Update the comment for maximum number of threads per PSD
Anuj Phogat [Fri, 5 May 2017 20:55:10 +0000 (13:55 -0700)]
i965/icl: Update the comment for maximum number of threads per PSD

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agoi965/icl: Build and use gen11 functions for genxml state-upload and blorp
Anuj Phogat [Thu, 20 Jul 2017 23:00:36 +0000 (16:00 -0700)]
i965/icl: Build and use gen11 functions for genxml state-upload and blorp

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
6 years agoi965/icl: Don't set ResetGatewayTimer
Anuj Phogat [Wed, 24 May 2017 20:58:37 +0000 (13:58 -0700)]
i965/icl: Don't set ResetGatewayTimer

This field is removed in gen11+

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agointel/icl: Do StateCacheInvalidation for indirect clear color
Anuj Phogat [Tue, 27 Jun 2017 21:46:26 +0000 (14:46 -0700)]
intel/icl: Do StateCacheInvalidation for indirect clear color

StateCacheInvalidation is required on all gen7+ platforms. We
don't need to update this check for every new gen h/w unless
this requirement is changed. So, dropping the check for latest
gen h/w.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agointel/isl/icl: Build and use gen11 surface state emit functions
Anuj Phogat [Thu, 20 Jul 2017 22:59:49 +0000 (15:59 -0700)]
intel/isl/icl: Build and use gen11 surface state emit functions

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
6 years agointel/isl/icl: Add the maximum surface size limit
Anuj Phogat [Fri, 19 May 2017 19:13:40 +0000 (12:13 -0700)]
intel/isl/icl: Add the maximum surface size limit

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agointel/genxml/icl: Update genx_bits header
Anuj Phogat [Tue, 16 May 2017 23:47:07 +0000 (16:47 -0700)]
intel/genxml/icl: Update genx_bits header

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
6 years agointel/genxml/icl: Generate packing headers
Anuj Phogat [Wed, 10 May 2017 17:50:15 +0000 (10:50 -0700)]
intel/genxml/icl: Generate packing headers

Move build system changes in to one patch (Ken, Emil)

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
6 years agointel/genxml/icl: Add gen11.xml
Anuj Phogat [Thu, 15 Feb 2018 18:39:00 +0000 (10:39 -0800)]
intel/genxml/icl: Add gen11.xml

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agoi965: Drop EXEC_OBJECT_CAPTURE defines.
Kenneth Graunke [Mon, 12 Feb 2018 15:14:22 +0000 (07:14 -0800)]
i965: Drop EXEC_OBJECT_CAPTURE defines.

These only existed to avoid making people update libdrm for new uABI
headers.  A while ago we imported those headers into the Mesa repo,
so the dependency is gone and these are no longer useful.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
6 years agoclover: Fix build after llvm r325155 and r325160
Jan Vesely [Thu, 15 Feb 2018 19:00:38 +0000 (14:00 -0500)]
clover: Fix build after llvm r325155 and r325160

r325155 ("Pass a reference to a module to the bitcode writer.")
and
r325160 ("Pass module reference to CloneModule")

change function interface from pointer to reference.

v2: Fix indentation (tab instead of spaces)

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
6 years agoradv: Always lower indirect derefs after nir_lower_global_vars_to_local.
Bas Nieuwenhuizen [Thu, 15 Feb 2018 20:24:35 +0000 (21:24 +0100)]
radv: Always lower indirect derefs after nir_lower_global_vars_to_local.

Otherwise new local variables can cause hangs on vega.

CC: <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105098
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
6 years agomeson: fix xvmc target linkage
Dylan Baker [Wed, 17 Jan 2018 18:20:54 +0000 (10:20 -0800)]
meson: fix xvmc target linkage

This needs to link the state tracker with --whole-archive to expose the
right symbols.

v4: - Always add libswdri and libswkmsdri to the link_with list

Fixes: 22a817af8a89eb3c7 ("meson: build gallium xvmc state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: Fix xa target linkage
Dylan Baker [Wed, 17 Jan 2018 18:12:19 +0000 (10:12 -0800)]
meson: Fix xa target linkage

This needs to use --whole-archive (link_whole in meson) to properly
expose symbols.

v4: - Always add libswdri and libswkmsdri to link_with list

Fixes: 0ba909f0f111824 ("meson: build gallium xa state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: Fix omx-bellagio target linkage
Dylan Baker [Wed, 17 Jan 2018 18:12:19 +0000 (10:12 -0800)]
meson: Fix omx-bellagio target linkage

This needs to use --whole-archive (link_whole in meson) to properly
expose symbols.

v4: - Always add libswdri and libswkmsdri to link_with

Fixes: 1d36dc674d528b93b ("meson: build gallium omx state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: fix va target linkage
Dylan Baker [Wed, 17 Jan 2018 17:49:55 +0000 (09:49 -0800)]
meson: fix va target linkage

The state tracker needs to be linked with whole-archive (like
autotools). As a result there are symbols from libswdri and libswkmsdri
that are needed, so link those as well.

v4: - Always add libswdri and libswkmsdri to link_with list

Fixes: 5a785d51a6d6 ("meson: build gallium va state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: fix vdpau target linkage
Dylan Baker [Thu, 11 Jan 2018 17:22:24 +0000 (09:22 -0800)]
meson: fix vdpau target linkage

The VDPAU state tracker needs to be linked with whole-archive (autotools
does this). Because we are linking the whole archive we alos need to
link with libswdri and libswkmsdri if those have been enabled.

v4: - Always add libswdri and libswkmsdri to link_with list

Fixes: 68076b87474e7959 ("meson: build gallium vdpau state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: Actually link xvmc target with libxvmc
Dylan Baker [Fri, 2 Feb 2018 00:09:02 +0000 (16:09 -0800)]
meson: Actually link xvmc target with libxvmc

Unlike vdpau this is required.

Fixes: 22a817af8a89eb3c7 ("meson: build gallium xvmc state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: actually link with libomxil-bellagio
Dylan Baker [Fri, 2 Feb 2018 00:03:17 +0000 (16:03 -0800)]
meson: actually link with libomxil-bellagio

This state tracker actually needs to link, unlike vdpau.

Fixes: 1d36dc674d528b93b ("meson: build gallium omx state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: link dri3 xcb libs into vlwinsys instead of into each target
Dylan Baker [Wed, 17 Jan 2018 18:26:58 +0000 (10:26 -0800)]
meson: link dri3 xcb libs into vlwinsys instead of into each target

This makes the dependencies easier to manage, since each media target
doesn't need to worry about linking to half a dozen libraries.

Fixes: b1b65397d0c4978e3 ("meson: Build gallium auxiliary")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: use va-api version reported by pkg-config
Dylan Baker [Thu, 18 Jan 2018 18:03:24 +0000 (10:03 -0800)]
meson: use va-api version reported by pkg-config

Fixes: 5a785d51a6d6 ("meson: build gallium va state tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: add libswdri and libswkmsdri to dri link_with
Dylan Baker [Mon, 12 Feb 2018 19:03:47 +0000 (11:03 -0800)]
meson: add libswdri and libswkmsdri to dri link_with

Fixes: b154b44ae342 ("meson: build radeonsi gallium driver")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: add libswdri and libswkmsdri to d3dadaptor link_with
Dylan Baker [Mon, 12 Feb 2018 18:58:58 +0000 (10:58 -0800)]
meson: add libswdri and libswkmsdri to d3dadaptor link_with

v5: - Fix libswdi -> libswdri typo

Fixes: 6b4c7047d571 ("meson: build gallium nine state_tracker")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: define empty variables for libswdri and libswkmsdri
Dylan Baker [Mon, 12 Feb 2018 18:46:06 +0000 (10:46 -0800)]
meson: define empty variables for libswdri and libswkmsdri

This allows these variables to unconditionally included in `link_with`
lists, even if they're not used. This allows deleting duplicated logic
in nearly every gallium target implemented in meson today. This also
removes the now useless `build_by_default` flag from swdri and swkmsdri.

v4: - add this patch

Fixes: 66c94b9313a697ce8f2b222f4ba353035e4b8726
       ("meson: build gallium winsys for dri, null, and wrapper")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
6 years agomeson: add convenience variable for anv_extensions.py depdendency
Dylan Baker [Tue, 23 Jan 2018 17:41:30 +0000 (09:41 -0800)]
meson: add convenience variable for anv_extensions.py depdendency

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
6 years agomeson: use depend_files for adding extra file dependencies
Dylan Baker [Tue, 23 Jan 2018 17:39:25 +0000 (09:39 -0800)]
meson: use depend_files for adding extra file dependencies

cc: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: dd088d4bec74f37ffe4 ("anv/extensions: Generate a header file with extension tables")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
6 years agomeson: use depend_files to track extra file dependencies
Dylan Baker [Tue, 23 Jan 2018 17:37:03 +0000 (09:37 -0800)]
meson: use depend_files to track extra file dependencies

cc: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: f93994080993bda ("anv: Split anv_extensions.py into two files")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
6 years agoRevert "anv/meson: Make anv_entrypoints_gen.py depend on anv_extensions.py"
Dylan Baker [Tue, 23 Jan 2018 17:34:53 +0000 (09:34 -0800)]
Revert "anv/meson: Make anv_entrypoints_gen.py depend on anv_extensions.py"

This reverts commit 10d1b0be8e9c463dbc35cd66968299f33c76672c.

This is unnecessary, the depend_files argument is for adding
dependencies on files that are not part of the input, which is already
done.

cc: Jason Ekstrand <jason.ekstrand@intel.com>
Fixes: 10d1b0be8e9c463dbc35cd66968299f33c76672c
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
6 years agosvga: replace gotos with else clauses
Brian Paul [Thu, 15 Feb 2018 16:12:03 +0000 (09:12 -0700)]
svga: replace gotos with else clauses

Simple clean-up.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>
6 years agosvga: s/unsigned/enum pipe_shader_type/
Brian Paul [Wed, 14 Feb 2018 21:53:42 +0000 (14:53 -0700)]
svga: s/unsigned/enum pipe_shader_type/

Reviewed-by: Neha Bhende <bhenden@vmware.com>
6 years agosvga: move duplicated code for setting fillmode/flatshade state
Brian Paul [Wed, 14 Feb 2018 17:37:27 +0000 (09:37 -0800)]
svga: move duplicated code for setting fillmode/flatshade state

Move the calls to svga_hwtnl_set_fillmode() and svga_hwtnl_set_flatshade()
out of the two retry_draw_*() functions to the svga_draw_vbo() function.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>
6 years agosvga: move svga_update_state() call in draw code
Brian Paul [Wed, 14 Feb 2018 17:33:58 +0000 (09:33 -0800)]
svga: move svga_update_state() call in draw code

This fixes a few Piglit transform feedback regressions caused by
commit 7a1401938b351.

In that change I moved the moved svga_update_state() into the loops,
after the calls to svga_hwtnl_set_flatshade().  But
svga_hwtnl_set_flatshade() actually depends on some derived shader
state.  This patch moves the svga_update_state() call into
svga_draw_vbo() so it's not duplicated in two places.

Fixes: 7a1401938b351 ("svga: clean up retry_draw_range_elements(),
retry_draw_arrays()")

Reviewed-by: Charmaine Lee <charmainel@vmware.com>
6 years agosvga: call tgsi_scan_shader() for dummy shaders
Brian Paul [Wed, 14 Feb 2018 20:50:00 +0000 (13:50 -0700)]
svga: call tgsi_scan_shader() for dummy shaders

If we fail to compile the normal VS or FS we fall back to a simple/
dummy shader.  We need to rescan the the shader to update the shader
info.  Otherwise, this can lead to further translations failures
because the shader info doesn't match the actual shader.

Found by adding some extra debug assertions in the state-update code
while debugging something else.

v2: also update shader generic_inputs/outputs, etc. per Charmaine

Reviewed-by: Charmaine Lee <charmainel@vmware.com>
6 years agoac/nir: do not reserve user SGPRs for unused descriptor sets
Samuel Pitoiset [Wed, 14 Feb 2018 17:15:23 +0000 (18:15 +0100)]
ac/nir: do not reserve user SGPRs for unused descriptor sets

In theory this might lead to corruption if we bind a descriptor
set which is unused, because LLVM is smart and it can re-use
unused user SGPRs. In practice, this doesn't seem to fix
anything.

As a side effect, this will reduce the number of emitted
SH_REG packets.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
6 years agoac/shader: fix gathering of desc_set_used_mask
Samuel Pitoiset [Wed, 14 Feb 2018 16:52:25 +0000 (17:52 +0100)]
ac/shader: fix gathering of desc_set_used_mask

This was quite wrong.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
6 years agoac/shader: be a little smarter when scanning vertex buffers
Samuel Pitoiset [Wed, 14 Feb 2018 11:03:55 +0000 (12:03 +0100)]
ac/shader: be a little smarter when scanning vertex buffers

Although meta shaders don't use any vertex buffers, there is no
behaviour change but I think it's better to do this. Though,
this saves two user SGPRs for push constants inlining or
something else.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
6 years agodri: fromPlanar() can return NULL as a valid result
Louis-Francis Ratté-Boulianne [Thu, 28 Sep 2017 07:18:33 +0000 (03:18 -0400)]
dri: fromPlanar() can return NULL as a valid result

It was assumed that fromPlanar() could return NULL to mean
that the planar image is the same as the parent DRI image.
That assumption wasn't made everywhere though.

Let's fix things and make sure that all callers understand
a NULL result

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
6 years agodocs: correct link to the 17.3.3 release notes
Emil Velikov [Thu, 15 Feb 2018 11:33:27 +0000 (11:33 +0000)]
docs: correct link to the 17.3.3 release notes

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>