2006-02-24  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/2218
* elf-bfd.h (elf_backend_data): Add elf_backend_fixup_symbol.
(_bfd_elf_link_hash_fixup_symbol): New.

* elflink.c (_bfd_elf_link_hash_fixup_symbol): New.
(_bfd_elf_fix_symbol_flags): Call elf_backend_fixup_symbol if
it isn't NULL.

* elfxx-ia64.c (elf_backend_fixup_symbol): Defined.

* elfxx-target.h (elf_backend_fixup_symbol): New.
(elfNN_bed): Initialize elf_backend_fixup_symbol.

2006-02-24  Paul Brook  <paul@codesourcery.com>

gas/
* config/arm/tc-arm.c (arm_ext_v6_notm, arm_ext_div, arm_ext_v7,
arm_ext_v7a, arm_ext_v7r, arm_ext_v7m): New variables.
(struct asm_barrier_opt): Define.
(arm_v7m_psr_hsh, arm_barrier_opt_hsh): New variables.
(parse_psr): Accept V7M psr names.
(parse_barrier): New function.
(enum operand_parse_code): Add OP_oBARRIER.
(parse_operands): Implement OP_oBARRIER.
(do_barrier): New function.
(do_dbg, do_pli, do_t_barrier, do_t_dbg, do_t_div): New functions.
(do_t_cpsi): Add V7M restrictions.
(do_t_mrs, do_t_msr): Validate V7M variants.
(md_assemble): Check for NULL variants.
(v7m_psrs, barrier_opt_names): New tables.
(insns): Add V7 instructions.  Mark V6 instructions absent from V7M.
(md_begin): Initialize arm_v7m_psr_hsh and arm_barrier_opt_hsh.
(arm_cpu_option_table): Add Cortex-M3, R4 and A8.
(arm_arch_option_table): Add armv7, armv7a, armv7r and armv7m.
(struct cpu_arch_ver_table): Define.
(cpu_arch_ver): New.
(aeabi_set_public_attributes): Use cpu_arch_ver.  Set
Tag_CPU_arch_profile.
* doc/c-arm.texi: Document new cpu and arch options.
gas/testsuite/
* gas/arm/thumb32.d: Fix expected msr and mrs output.
* gas/arm/arch7.d: New test.
* gas/arm/arch7.s: New test.
* gas/arm/arch7m-bad.l: New test.
* gas/arm/arch7m-bad.d: New test.
* gas/arm/arch7m-bad.s: New test.
include/opcode/
* arm.h: Add V7 feature bits.
opcodes/
* arm-dis.c (arm_opcodes): Add V7 instructions.
(thumb32_opcodes): Ditto.  Handle V7M MSR/MRS variants.
(print_arm_address): New function.
(print_insn_arm): Use it.  Add 'P' and 'U' cases.
(psr_name): New function.
(print_insn_thumb32): Add 'U', 'C' and 'D' cases.

* gdb.fortran/derived-type.f90: New file.
* gdb.fortran/derived-type.exp: New testcase.

* f-exp.y: Symbol '%' is not used as the modulus operator in
Fortran.  Delete this from Fortran expression.
It is now used by Fortran 90 and later to access the member
of derived type.  Add this into Fortran expression.
* f-valprint.c (f_val_print): Add code to handle TYPE_CODE_STRUCT.
Print each elements in the derived type.
* f-typeprint.c (print_equivalent_f77_float_type): Add a parameter
level into the function definition to do indented printing.  And
call fprintfi_filtered instead to do indented printing.
(f_type_print_base): Replace fprintf_filtered with the indented
version (fprintfi_filtered).
(f_type_print_base): Call indented print_equivalent_f77_float_type.
(f_type_print_base): Add code to handle TYPE_CODE_STRUCT.  Print
the definition of the derived type.

*** empty log message ***

daily update

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* ld-pie/weakundef-data.c: Fix the typo.

bfd/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* cpu-ia64-opc.c (ins_immu5b): New.
(ext_immu5b): Likewise.
(elf64_ia64_operands): Add IMMU5b.

gas/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-ia64.c (operand_match): Handle IA64_OPND_IMMU5b.

gas/testsuite/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* gas/ia64/opc-i.s: Add tests for tf.
* gas/ia64/pseudo.s: Likewise.
* gas/ia64/opc-i.d: Updated.
* gas/ia64/pseudo.d: Likewise.

include/opcode/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* ia64.h (ia64_opnd): Add IA64_OPND_IMMU5b.

opcodes/

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

* ia64-opc-i.c (bXc): New.
(mXc): Likewise.
(OpX2TaTbYaXcC): Likewise.
(TF). Likewise.
(TFCM). Likewise.
(ia64_opcodes_i): Add instructions for tf.

* ia64-opc.h (IMMU5b): New.

* ia64-asmtab.c: Regenerated.

* gdb_curses.h: Provide a fallback prototype for tgetnum.

* doublest.h: Conditionalize DOUBLEST on PRINTF_HAS_LONG_DOUBLE
also.
(DOUBLEST_FORMAT): Rename to DOUBLEST_PRINT_FORMAT.
(DOUBLEST_SCAN_FORMAT): New.
* ada-lex.l (PRINTF_HAS_LONG_DOUBLE): Remove redefinitions.
(processReal): Use DOUBLEST_SCAN_FORMAT.
* c-exp.y (parse_number): Likewise.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.

* event-top.c (async_do_nothing, async_disconnect)
(async_stop_sig, async_float_handler): Remove duplicated
prototypes.
(handle_sighup): Guard prototype with SIGHUP.
(async_do_nothing): Guard function and prototype with
SIGQUIT || SIGHUP.
(async_disconnect): Guard prototype with SIGHUP.
(async_stop_sig): Guard prototype with STOP_SIGNAL.

* maint.c (maintenance_dump_me): Remove unnecessary prototype.

* win32-termcap.c (tputs): Return 0.

* gdb.base/default.exp: Allow ';' as a directory separator.

* readline/terminal.c (_rl_get_screen_size): Get console size from
the Windows API when compiling with MinGW.

Update copyright years.

* cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
mapping.
(cris_break_13_handler) <case TARGET_SYS_time>: New case.

* sim/cris/c/time2.c: New test.

gas/

2006-02-22  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-ia64.c (specify_resource): Add the rule 17 from
SDM 2.2.

gas/testsuite/

2006-02-22  H.J. Lu  <hongjiu.lu@intel.com>

* gas/ia64/dv-raw-err.s: Add check for vmsw.0.
* gas/ia64/dv-raw-err.l: Updated.

* gas/ia64/opc-b.s: Add vmsw.0 and vmsw.1.
* gas/ia64/opc-b.d: Updated.

opcodes/

2006-02-22  H.J. Lu  <hongjiu.lu@intel.com>

* ia64-gen.c (lookup_regindex): Handle ".vm".
(print_dependency_table): Handle '\"'.

* ia64-ic.tbl: Updated from SDM 2.2.
* ia64-raw.tbl: Likewise.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerated.

* ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1.

*** empty log message ***

daily update

2006-02-22  H.J. Lu  <hongjiu.lu@intel.com>

* ld-pie/pie.c: New file.

* ld-pie/pie.exp: Check if compiler supports -pie.

2005-02-22  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (do_pld): Remove incorrect write to
inst.instruction.
(encode_thumb32_addr_mode): Use correct operand.
gas/testsuite/
* gas/arm/thumb32.d: Fix expected pld opcode.

*** empty log message ***

daily update

* configure.ac: Introduce ---enable-werror, which adds -Werror to
the compiler command line.  Enabled by default.  Disable with
--disable-werror.
* configure regenerate.

    * elfread.c (elf_symtab_read): Skip symbols which BFD considers
special.

2006-02-21  Andrew Stubbs  <andrew.stubbs@st.com>

* defs.h (directory_switch): Add prototype.
* main.c (captured_main): Use directory_switch() instead of
directory_command() to add directories from the -d switch.
* source.c (directory_switch): New function.
(add_path): Use buildargv() to parse spaces in filenames properly.
Strip multiple trailing '/' rather than just one.

2006-02-21  Andrew Stubbs  <andrew.stubbs@st.com>

* symfile.c (add_symbol_file_command): Use buildargv(), instead of
hand decoding the command line, to allow use of quotes and spaces.
(_initialize_symfile): Reorganize the help message for add-symbol-file
such that 'help files' shows a better message.

testsuite/
* gdb.base/help.exp (help add-symbol-file): Update.

2006-02-21  Andrew Stubbs  <andrew.stubbs@st.com>

* symfile.c (generic_load): Use buildargv() and tilde_expand()
to parse file names with quoting, spaces and tildes properly.
(load_command): Quote all special characters before calling
target_load() such that buildargv() doesn't break file names.
(_initialize_symfile): Mention the load offset in the help for
the load command.
* remote-sim.c: Include readline.h.
(gdbsim_load): Use buildargv and tilde_expand() to parse file
names with quoting, spaces and tildes properly.
* target.h (target_load): Comment the parameters better.
* Makefile.in (remote_sim.o): Add readline.h dependency.

testsuite/
* gdb.base/help.exp (help load): Update expected results.

2006-02-21  Andrew Stubbs  <andrew.stubbs@st.com>

* sh-tdep.c (sh_generic_show_regs): Reformat both code and output.
(sh3_show_regs, sh2e_show_regs, sh2a_show_regs): Likewise.
(sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs): Likewise.
(sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Likewise.

2006-02-21  Paul Brook  <paul@codesourcery.com>

* config/tc-arm.c (md_apply_fix): Fix off-by-one errors.

merge from gcc

merge from gcc

PR ld/2218
* elf32-arm.c (allocate_dynrelocs): Ensure undef weak sym in pie
is dynamic.
* elf32-hppa.c (allocate_dynrelocs): Likewise.
* elf32-i386.c (allocate_dynrelocs): Likewise.
* elf32-s390.c (allocate_dynrelocs): Likewise.
* elf32-sh.c (allocate_dynrelocs): Likewise.
* elf64-s390.c (allocate_dynrelocs): Likewise.
* elf64-x86-64.c (allocate_dynrelocs): Likewise.
* elf32-m32r.c (allocate_dynrelocs): Likewise.  Discard relocs
on undef weak with non-default visibility too.
* elfxx-sparc.c (allocate_dynrelocs): Ditto.

* bfd.c: (_bfd_default_error_handler): Don't call abort on
error, instead call _exit.
(_bfd_abort): Call _exit not xexit.

*** empty log message ***

2006-02-20  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/2218
* ld-pie/pie.exp: Add the weak undefined data test.

* ld-pie/weakundef-data.c: New file.

* linux-nat.c (lin_thread_get_thread_signals): Default to __SIGRTMIN
and __SIGRTMIN + 1.

* remote.c: Add an enumeration for configurable remote
packets.
(remote_protocol_packets, set_remote_protocol_packet_cmd)
(show_remote_protocol_packet_cmd): New.
(remote_protocol_vcont)
(set_remote_protocol_vcont_packet_cmd)
(show_remote_protocol_vcont_packet_cmd)
(remote_protocol_qSymbol)
(set_remote_protocol_qSymbol_packet_cmd)
(show_remote_protocol_qSymbol_packet_cmd)
(remote_protocol_P, set_remote_protocol_P_packet_cmd)
(show_remote_protocol_P_packet_cmd)
(remote_protocol_Z)
(set_remote_protocol_Z_software_bp_packet_cmd)
(show_remote_protocol_Z_software_bp_packet_cmd)
(set_remote_protocol_Z_hardware_bp_packet_cmd)
(show_remote_protocol_Z_hardware_bp_packet_cmd)
(set_remote_protocol_Z_write_wp_packet_cmd)
(show_remote_protocol_Z_write_wp_packet_cmd)
(set_remote_protocol_Z_read_wp_packet_cmd)
(show_remote_protocol_Z_read_wp_packet_cmd)
(set_remote_protocol_Z_access_wp_packet_cmd)
(show_remote_protocol_Z_access_wp_packet_cmd)
(remote_protocol_binary_download)
(set_remote_protocol_binary_download_cmd)
(show_remote_protocol_binary_download_cmd)
(remote_protocol_qPart_auxv)
(set_remote_protocol_qPart_auxv_packet_cmd)
(show_remote_protocol_qPart_auxv_packet_cmd)
(remote_protocol_qGetTLSAddr)
(set_remote_protocol_qGetTLSAddr_packet_cmd)
(show_remote_protocol_qGetTLSAddr_packet_cmd)
(remote_protocol_p)
(set_remote_protocol_p_packet_cmd)
(show_remote_protocol_p_packet_cmd): Delete.

(init_all_packet_configs): Simplify.
(set_remote_protocol_Z_packet_cmd)
(show_remote_protocol_Z_packet_cmd)
(remote_check_symbols, remote_vcont_probe, remote_vcont_resume)
(remote_fetch_registers, remote_prepare_to_store)
(remote_store_registers, check_binary_download)
(remote_write_bytes, remote_insert_breakpoint)
(remote_remove_breakpoint, remote_insert_watchpoint)
(remote_remove_watchpoint, remote_insert_hw_breakpoint)
(remote_remove_hw_breakpoint, remote_xfer_partial)
(remote_get_thread_local_address): Update for packet array.
(_initialize_remote): Likewise; also update for common
set/show commands.

* symfile.c (place_section): Correct retry logic.

2006-02-20  Paolo Bonzini  <bonzini@gnu.org>

PR bootstrap/25670

* Makefile.tpl ([+compare-target+]): Print explanation messages.

* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES): New flags_to_pass.
* Makefile.tpl (BASE_FLAGS_TO_PASS): Support optional flags_to_pass.
(EXTRA_GCC_FLAGS): Remove ADAFLAGS, BOOT_ADAFLAGS, LANGUAGES,
BUILD_PREFIX, BUILD_PREFIX_1.
* configure.in: (BUILD_PREFIX, BUILD_PREFIX_1): Don't substitute.

* Makefile.def (bootstrap stage 1): Pass LIBCFLAGS too.
* Makefile.tpl (POSTSTAGE1_FLAGS_TO_PASS): Override LIBCFLAGS too.

* Makefile.tpl (configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+], : Use $(current_stage) instead
of `cat stage_current`.  Always provide the `r' and `s' variables.
(clean-stage[+id+]-[+prefix+][+module+]): Likewise, and make it into
a single shell execution.
(configure-[+prefix+][+module+], all-[+prefix+][+module+]): For
bootstrapped modules, make the stage1 module if the build was not
started yet, else build the current stage.
(all-host, all-target): Omit bootstrapped modules (if bootstrapping).
(all-build, all-host, all-target, [+make_target+]-host,
[+make_target+]-target): Do not use \-continued lines.
(target modules): Depend on stage_last, not all-gcc, if bootstrapping.
(current_stage, restrap, stage_last): New.

* Makefile.in: Regenerate.
* configure: Regenerate.

* win32_nat.c (cygwin_load_start): New variable.
(cygwin_load_end): Ditto.
(have_saved_context): Ditto.
(saved_context): Ditto.
(max_dll_name_len): Delete obsolete variable.
(do_win32_fetch_inferior_registers): Use context saved from cygwin1.dll if we
are in a cygwin signal rather than a windows signal.
(solib_symbols_add): Detect and store beginning and end of cygwin DLL if dll
being loaded is the cygwin DLL.
(register_loaded_dll): Remove calculation of max_dll_name_len.
(win32_clear_solib): Ditto.
(handle_load_dll): Delete obsolete variable.  Remove unneeded call to
solib_add.
(handle_output_debug_string): Detect and store signal information sent by
Cygwin here.
(handle_exception): Silently pass on errors in the cygwin DLL.  Return -1 on
first pass exception.
(win32_continue): Remove spurious clearing of continue_status.
(get_win32_debug_event): Deal differently first chance exception.

*** empty log message ***

daily update

Reviewed and approved by Daniel Jacobowitz

2006-02-19  Fred Fish  <fnf@specifix.com>
* gdb.base/pc-fp.exp (get_valueofx): Don't print environment
specifix hex value as part of results.
* gdb.base/shreloc.exp (get_msym_addrs): Ditto.

2006-02-19  Randolph Chung  <tausq@debian.org>

* hppa-tdep.c (hppa_in_solib_call_trampoline): Only use if no
unwind entry.

*** empty log message ***

daily update

2006-02-16  Fred Fish  <fnf@specifix.com>
* eval.c (evaluate_subexp_standard):  For OP_TYPE, return
a non lval value zero, of the appropriate type, when avoiding
side effects.
* typeprint.c (ptype_eval): Remove function and declaration.
(ptype_command): Simplify to just a call to whatis_exp.

2006-02-17  Fred Fish  <fnf@specifix.com>
* gdb.texinfo (Symbols): Update descriptions of 'whatis' and
'ptype' commands to reflect the fact that the only significant
difference between them is that ptype prints the complete type
description instead of just the name.

2006-02-16  Fred Fish  <fnf@specifix.com>
* gdb.base/whatis.c: Define variables using typedefs char_addr,
ushort_addr, and slong_addr, so the typedefs are not optimized
away.
* gdb.base/whatis.exp: Add tests using type name for struct type,
union type, enum type, and typedef.

*** empty log message ***

daily update

* elf32-frv.c (elf32_frv_grok_prstatus, elf32_frv_grok_psinfo):
New functions.
* elf_backend_grok_prstatus, elf_backend_grok_psinfo): Define.

Add support for the Infineon XC16X.

* readelf.c (get_machine_flags): Add logic for missing EF_SH flags.

* elf32-ppc.c (allocate_dynrelocs): Tweak undef weak handling.
* elf64-ppc.c (allocate_dynrelocs): Likewise.

PR ld/2218
* elf64-ppc.c (allocate_dynrelocs): Ensure undef weak sym is
dynamic.
(ppc64_elf_relocate_section): Check output reloc section size.
* elf32-ppc.c (allocate_dynrelocs): Simplify undef weak test.

*** empty log message ***

daily update

2006-02-16  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/2322
* elf.c (get_segment_type): New function.
(_bfd_elf_print_private_bfd_data): Use it.
(print_segment_map): New function.
(assign_file_positions_for_segments): Call print_segment_map
when there are not enough room for program headers.

bfd:
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.

gas:
* configure.tgt: set emulation for mips-*-netbsd*

ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.

*** empty log message ***

daily update

2006-02-15  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/2338
* dwarf2.c (check_function_name): New function.
(_bfd_dwarf2_find_nearest_line): Use check_function_name to
check if function is correct.

2006-02-15  Paul Brook  <paul@codesourcery.com>

* arm-tdep.c (arm_skip_prologue, thumb_get_next_pc, arm_get_next_pc):
Load insn opcodes as unsigned values.

* linux-low.c (regsets_store_inferior_registers): Read the regset
from the target before filling it.

* elflink.c (_bfd_elf_default_action_discarded): Return 0 for
debug sections.
(elf_link_input_bfd): Adjust comments.

*** empty log message ***

daily update

Update copyright notice

* doublest.h (DOUBLEST): Use long double only if we can scan
it in.  Undefine HAVE_LONG_DOUBLE otherwise.
(DOUBLEST_FORMAT): New.
* c-exp.y (parse_number): Use it.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* varobj.c (free_variable): Silence type-punning warnings.
* tui/tui-data.h (struct tui_list): Change type of list member.
* tui/tui-data.c: Remove no-longer-needed type casts.
(source_windows): Silence type-punning warnings.
* tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise.

Fix PR breakpoints/2080.
* i386-tdep.c (struct i386_frame_cache): Add stack_align member.
(i386_analyze_stack_align): New function.
(i386_analyze_prologue): Use i386_analyze_stack_align.
(i386_frame_cache): Deal with stack realignment.

2006-02-14  Paolo Bonzini  <bonzini@gnu.org>

Sync from gcc:

2006-01-31  Richard Guenther  <rguenther@suse.de>
    Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.def (target_modules): Add libgcc-math target module.
        * configure.in (target_libraries): Add libgcc-math target library.
        (--enable-libgcc-math): New configure switch.
        * Makefile.in: Re-generate.
        * configure: Re-generate.
        * libgcc-math: New toplevel directory.

2006-01-18  Richard Henderson  <rth@redhat.com>
            Jakub Jelinek  <jakub@redhat.com>
            Diego Novillo  <dnovillo@redhat.com>

        * libgomp: New directory.
        * Makefile.def: Add target_module libgomp.
        * Makefile.in: Regenerate.
        * configure.in (target_libraries): Add target-libgomp.
        * configure: Regenerate.

2006-02-14  Paolo Bonzini  <bonzini@gnu.org>
    Andreas Schwab  <schwab@suse.de>

* configure: Regenerate.

config:
2006-02-14  Paolo Bonzini  <bonzini@gnu.org>
            Andreas Schwab  <schwab@suse.de>

        * acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.

Use more functions from gdb-ui.el.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui

*** empty log message ***

gas/
* config.in: Rebuilt.
binutils/
* config.in: Rebuilt.

* config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
from 1, not 0, in error messages.
(md_assemble): Simplify special-case check for ENTRY instructions.
(tinsn_has_invalid_symbolic_operands): Do not include opcode and
operand in error message.

*** empty log message ***

daily update

* gdb.arch/i386-prologue.exp: Add testcase for PR breakpoints/2080.

gdb/testsuite/ChangeLog:
2006-02-13  Jim Blandy  <jimb@redhat.com>

* gdb.base/scope.exp (test_at_main): Remove logic to handle the
case where it takes two "next" commands to skip past the init
call.

gas:
* configure.tgt (arm-*-linux-gnueabi*): Change to
arm-*-linux-*eabi*.

ld:
* configure.tgt (arm*b-*-linux-gnueabi): Change to
arm*b-*-linux-*eabi.
(arm*-*-linux-gnueabi): Change to arm*-*-linux-*eabi.

Reviewed and approved by Jim Blandy

2006-02-12  Fred Fish  <fnf@specifix.com>
* gdb.base/scope.exp (test_at_main): Use gdb_test_multiple
to handle cases where it takes two "next" commands to skip
past the init call.

* gdbint.texinfo (Watchpoints): Delete
        TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.

*** empty log message ***

daily update

2006-02-12  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/x86-64-crx-suffix.d: Undo the last change.

merge from gcc

*** empty log message ***

daily update

gas/testsuite/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Add "x86-64-drx" and "x86-64-drx-suffix".

* gas/i386/x86-64-crx-suffix.d: Minor update.

* gas/i386/x86-64-drx-suffix.d: New file.
* gas/i386/x86-64-drx.d: Likewise.
* gas/i386/x86-64-drx.s: Likewise.

opcodes/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (dis386_twobyte): Use "movZ" for debug register
moves.

gas/testsuite/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Add "x86-64-crx" and "x86-64-crx-suffix".

* gas/i386/x86-64-crx-suffix.d: New file.
* gas/i386/x86-64-crx.d: Likewise.
* gas/i386/x86-64-crx.s: Likewise.

opcodes/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c ('Z'): Add a new macro.
(dis386_twobyte): Use "movZ" for control register moves.

*** empty log message ***

daily update

* NEWS: Mention native Windows support.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire".  Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h".  Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise.  Pass an exception set to select.  Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c.  Add exception condition support.  Use serial_for_fd
and serial_wait_handle.  Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.

* Makefile.in (mingw-hdep.o, posix-hdep.o): New dependencies.
(ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c.
* configure.ac: Add gdb_host_obs to CONFIG_OBS.  Set gdb_host_obs
to posix-hdep.o by default.
* configure: Regenerated.
* configure.host: Document gdb_host_obs.  Add an entry for
i[34567]86-*-mingw32*.
* mingw-hdep.c, posix-hdep.c: New files.
* utils.c (safe_strerror): Remove, moved to posix-hdep.o.

    * defs.h (gdb_osabi): New enum value GDB_OSABI_AIX.
        * osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX.
        * rs6000-tdep.h: New file.
        * rs6000-tdep.c: Include "rs6000-tdep.h".
        (rs6000_gdbarch_init): Remove enabling of software single step.
        Will be done in the AIX-specific initialization routine.
        * rs6000-aix-tdep.c: New file.
        * config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o.
        * Makefile.in (rs6000_tdep_h): New variable.
        (rs6000-tdep.o): Update dependencies.
        (rs6000-aix-tdep.o): New rule.