Mike Frysinger [Mon, 23 Mar 2015 03:16:01 +0000 (23:16 -0400)]
sim: erc32/h8300/m68hc11: trim unused functions
These funcs are only used with the old run.o, and these sims use nrun.o,
so drop these stub funcs.
Mike Frysinger [Mon, 23 Mar 2015 02:59:47 +0000 (22:59 -0400)]
sim: moxie: switch to common sim-command.o
Mike Frysinger [Mon, 23 Mar 2015 02:55:42 +0000 (22:55 -0400)]
sim: clean up SIM_HAVE_BIENDIAN
This define only applies when using the old run.o main. Document it as
such, and delete it from mips/sh64 since both use nrun.o now.
Mike Frysinger [Mon, 23 Mar 2015 02:45:47 +0000 (22:45 -0400)]
sim: m32r: drop duplicate dv_sockser_install call
Since sim_module_install takes care of this for us, there's no need
to initialize the module twice.
Mike Frysinger [Sat, 14 Mar 2015 20:09:12 +0000 (16:09 -0400)]
sim: Revert "Fix frv/iq2000/m32r/sh64 sim, default hardware to off."
This partially reverts commits:
105dd264de9a2fa7eee45eff897aa1d6171c1c4b
3df3af7c3f9095f9dc951fe680ce76f6e497914b
c4892a6b37647a0b33a2113b59762f678aabe4b2
9e3042ec073e05a0a5aa56398fd2662c5dcd5002
Now that dv-sockser is handled entirely by the common build logic, the
failure these targets were hitting isn't really possible anymore. Lets
reset their hardware status back to defaulting to on. Some of these
were set to "always" previously, but we don't support that anymore.
Mike Frysinger [Tue, 24 Mar 2015 02:19:41 +0000 (22:19 -0400)]
sim: fix sim-hardware configure option
The current default handling for the --enable-sim-hardware option ends up
forcing the value to whatever is set as the first argument when calling
the macro (by virtue of how autoconf works). Relocate the setup code to
the 4th parameter of the AC_ARG_ENABLE macro to fix it.
This was caused by the simplification work in
1517bd274290e06af498ef7e49.
Reported-by: Hans-Peter Nilsson <hans-peter.nilsson@axis.com>
Mike Frysinger [Tue, 24 Mar 2015 02:45:13 +0000 (22:45 -0400)]
sim: drop support for requiring hw support
Since no sim is using the "always" option to SIM_AC_OPTION_HARDWARE, and
we don't want to require hw support to always be enabled, drop the option.
This leads to a slight simplification in the macro too as we can collapse
the sim_hw_p variable.
Mike Frysinger [Tue, 24 Mar 2015 03:09:39 +0000 (23:09 -0400)]
sim: cris: delete unused CONFIG_DEVICES
Looks like unused copy & paste from other sim ports. Drop it.
Mike Frysinger [Mon, 23 Mar 2015 02:41:36 +0000 (22:41 -0400)]
sim: mn10300: fix duplicated hardware option
This code was calling SIM_AC_OPTION_HARDWARE twice -- we only want and
need to do it once.
Mike Frysinger [Tue, 24 Mar 2015 02:57:36 +0000 (22:57 -0400)]
sim: iq2000/mn10300: drop dv-sockser.o references
The common code handles this for us now automatically.
Mike Frysinger [Tue, 24 Mar 2015 01:51:35 +0000 (21:51 -0400)]
sim: frv: delete UART device support
This looks like copy & paste logic from the m32r port (and history
suggests this as well). Since building with hw & device support
enabled leads to failures:
sim/frv/devices.c: In function 'device_io_read_buffer':
sim/frv/devices.c:39:15: error: 'UART_INCHAR_ADDR' undeclared (first use in this function)
Delete it entirely. We leave device support in place as it is used
to flush the scache.
GDB Administrator [Tue, 24 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Mon, 23 Mar 2015 22:42:23 +0000 (15:42 -0700)]
Fix indentation in ser_windows_setparity and hardwire_setparity.
gdb/ChangeLog:
* ser-mingw.c (ser_windows_setparity): Fix indentation.
* ser-unix.c (hardwire_setparity): Likewise.
Yury Grechishchev [Mon, 23 Mar 2015 21:15:42 +0000 (00:15 +0300)]
GDB: Add set/show serial parity command.
The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
Keith Seitz [Mon, 23 Mar 2015 20:32:01 +0000 (13:32 -0700)]
Update comment of linespec_lexer_lex_keyword.
gdb/ChangeLog
* linespec.c (linespec_lexer_lex_keyword): Update comment.
Keith Seitz [Mon, 23 Mar 2015 20:29:19 +0000 (13:29 -0700)]
Add missing changelog entries of last commit
Keith Seitz [Mon, 23 Mar 2015 19:59:18 +0000 (12:59 -0700)]
Expand keyword lexing intelligence in the linespec parser.
This patch changes the heuristic the linespec lexer uses to
detect a keyword in the input stream.
Currently, the heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by a non-identifier character
This is strictly more correct than using whitespace. For example,
it allows constructs such as "break foo if(i == 1)". However,
find_condition_and_thread in breakpoint.c does not support this expanded
usage. It requires whitespace to follow the keyword.
The proposed new heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by whitespace
3) is not followed by another keyword string followed by whitespace
This additional complexity allows constructs such as
"break thread thread 3" and "break thread 3". In the former case,
the actual location is a symbol named "thread" to be set on thread #3.
In the later case, the location is NULL, i.e., the default location,
to be set on thread #3.
In order to pass all the new tests added here, I've also had to add a
new feature to parse_breakpoint_sals, which expands recognition of the
default location to keywords other than "if", which is the only keyword
currently permitted with the default (NULL) location, but there is no
reason to exclude other keywords.
Consequently, it will be possible to use "break thread 1" or
"break task 1".
In addition to all of this, it is now possible to remove the keyword_ok
state from the linespec parser.
gdb/ChangeLog
* breakpoint.c (parse_breakpoint_sals): Use
linespec_lexer_lex_keyword to ascertain if the user specified
a NULL location.
* linespec.c [IF_KEYWORD_INDEX]: Define.
(linespec_lexer_lex_keyword): Export.
(struct ls_parser) <keyword_ok>: Remove.
A keyword is only a keyword if not followed by another keyword.
(linespec_lexer_lex_one): Remove keyword_ok handling.
Add comment explaining why the parsing stream is not advanced
when a keyword is seen.
(parse_linespec): Remove parser->keyword_ok.
* linespec.h (linespec_lexer_lex_keyword): Add declaration.
gdb/testsuite/ChangeLog
* gdb.linespec/keywords.c: New file.
* gdb.linespec/keywords.exp: New file.
Keith Seitz [Fri, 27 Feb 2015 17:55:07 +0000 (09:55 -0800)]
PR gdb/18021 - defend against "static virtual" methods
This bug appears to be caused by bad debuginfo. The method
causing the sefault in the reporter's test case is marked both static
and virtual.
This patch simply safegaurds against this case in dwarf2_add_member_fn,
where the code assumes that there is a `this' pointer when a virtual method
is seen (more specifically, when DW_AT_vtable_elem is seen).
It previously dereferenced the first formal parameter
(`this' pointer), which in this case doesn't exist. GDB consequently
segfaulted dereferencing a NULL pointer.
gdb/ChangeLog
PR gdb/18021
* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
if we find a static method with DW_AT_vtable_elem_location.
gdb/testsuite/ChangeLog
PR gdb/18021
* gdb.dwarf2/staticvirtual.exp: New test.
Keith Seitz [Mon, 23 Mar 2015 18:41:11 +0000 (11:41 -0700)]
[OBV] Fix build -- missing ';'
bfd/ChangeLog
* elfnn-aarch64.c (_bfd_aarch64_create_or_find_stub_sec): Add
missing ';'.
Marcus Shawcroft [Fri, 20 Mar 2015 18:54:59 +0000 (18:54 +0000)]
Adding Changelog for previous commit.
Marcus Shawcroft [Fri, 20 Mar 2015 18:54:59 +0000 (18:54 +0000)]
Factor out _bfd_aarch64_erratum_835769_stub_name
Marcus Shawcroft [Fri, 20 Mar 2015 20:20:35 +0000 (20:20 +0000)]
[AArch64] Factor out _bfd_aarch64_resize_stubs()
Marcus Shawcroft [Tue, 10 Mar 2015 13:16:28 +0000 (13:16 +0000)]
[AArch64] Factor stub creation code into _bfd_aarch64_create_stub_section.
Marcus Shawcroft [Sat, 28 Feb 2015 00:10:21 +0000 (00:10 +0000)]
[AArch64] Factor out common behaviour between elf_aarch64_create_or_find_stub_sec and elfNN_aarch64_add_stub
Marcus Shawcroft [Fri, 20 Mar 2015 18:49:29 +0000 (18:49 +0000)]
[AArch64] Flip sense of erratum_835769_scan.
Marcus Shawcroft [Sat, 28 Feb 2015 00:06:26 +0000 (00:06 +0000)]
[AArch64] Drop unused argument to elf_aarch64_create_or_find_stub_sec
Marcus Shawcroft [Sun, 22 Mar 2015 07:59:48 +0000 (07:59 +0000)]
[AArch64] Remove unused variable.
Marcus Shawcroft [Mon, 23 Mar 2015 15:10:56 +0000 (15:10 +0000)]
Fixup previous changelog entry.
Marcus Shawcroft [Sun, 22 Mar 2015 07:57:18 +0000 (07:57 +0000)]
Remove dead code.
Marcus Shawcroft [Thu, 12 Mar 2015 12:11:07 +0000 (12:11 +0000)]
[AArch64] Tidy up in aarch64_mem_op_p().
Marcus Shawcroft [Fri, 13 Mar 2015 14:50:26 +0000 (14:50 +0000)]
[AArch64] Adjust layout of elfNN_aarch64_write_section.
Marcus Shawcroft [Sun, 22 Mar 2015 07:47:38 +0000 (07:47 +0000)]
[AArch64] Adjust layout emultempl/aarch64elf.em.
Rafael Ávila de Espíndola [Mon, 23 Mar 2015 13:16:49 +0000 (09:16 -0400)]
Remove is_merge_section_for.
Now that Input_merge_map has an Output_section_data, we can use it in
implementing find_merge_section and replace the only use of is_merge_section_for
with it.
Nick Clifton [Mon, 23 Mar 2015 11:40:14 +0000 (11:40 +0000)]
Fix thinko with previous delta to RL78 sim, by adding code to define the G10 and G13 mode options.
* cpu.c (rl78_g10_mode): Declare.
(g13_multiply): Declare.
* cpu.h (rl78_g10_mode): Export.
(g13_multiply): Export.
Mike Frysinger [Mon, 23 Mar 2015 02:36:12 +0000 (22:36 -0400)]
sim: dv-sockser: move build to common dir
If dv-sockser is available, lets add it to the common SIM_HW_OBJS
variable so it is always included automatically. Now ports do not
have to shoe horn it in directly themselves. It does mean it will
be compiled for targets that don't explicitly use it, but that's
really what we want anyways.
Mike Frysinger [Mon, 23 Mar 2015 02:23:04 +0000 (22:23 -0400)]
sim: dv-sockser: add stub funcs when not available
This lets ports assume that the dv-sockser API is always available if
they want to. This way we don't have to do an abort at configure time
and it makes the resulting code a bit simpler.
Mike Frysinger [Mon, 23 Mar 2015 04:08:25 +0000 (00:08 -0400)]
sim: bfin/msp430: drop run-sim.h include
This header is used only with run.o, and both of these use nrun.o.
Mike Frysinger [Mon, 23 Mar 2015 02:25:04 +0000 (22:25 -0400)]
sim: sh64: delete dv-sockser references
This sim doesn't actually use dv-sockser code anywhere, so drop references
to it in its build files.
GDB Administrator [Mon, 23 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Sun, 22 Mar 2015 18:59:21 +0000 (11:59 -0700)]
Fix support for i386 TLS GD-to-IE optimization.
There are two cases to support, one with an SIB-form (6-byte) LEA,
the other with a 5-byte LEA and a NOP after the call __tls_get_addr.
Gold did not yet support the second case. This patch adds that
support.
gold/
PR gold/18106
* i386.cc (Target_i386::Relocate::tls_gd_to_ie): Fix support for
non-SIB form of lea, with nop after the call.
Cary Coutant [Sun, 22 Mar 2015 05:30:44 +0000 (22:30 -0700)]
Fix internal error with -z relro when .tbss is last relro section.
When calculating the padding necessary to align the end of the relro
segment to a page boundary, gold erroneously ignores the .tdata section
when checking to see if there are any relro sections (so if .tdata
is the only relro section, we fail to align the segment properly),
and erroneously pads the cumulative size of the segment based on
the alignment of .tbss. If there are no relro sections following .tbss,
it then fails to note the padding needed at the end of .tdata.
This patch fixes both problems. is_first_section_relro() will return
true when it sees a .tdata section, and we do not align the cumulative
size until after checking for the .tbss section.
gold/
PR gold/14217
* output.cc (Output_segment::is_first_section_relro): Don't ignore
.tdata section.
(Output_segment::set_section_addresses): Don't align size of relro
segment for .tbss.
Cary Coutant [Sun, 22 Mar 2015 04:09:46 +0000 (21:09 -0700)]
Fix bug when optimizing string pools of aligned strings.
Tail optimization of string pools (enabled when linker is run with -O2
or greater) should not be done when the section alignment is greater
than the size of the characters in the strings; otherwise, unaligned
strings may result.
gold/
PR gold/18010
* stringpool.cc (Stringpool_template): Don't optimize if section
alignment is greater than sizeof(char).
Cary Coutant [Sun, 22 Mar 2015 02:03:00 +0000 (19:03 -0700)]
PR gold/18048: Fix INCLUDE directive support for gold
This patch fixes INCLUDE directives in script files, so that when
an INCLUDE appears inside a sections block, section commands block,
or memory def block, the contents are parsed in the appropriate
context.
gold/
PR gold/18048
* script-c.h (script_include_directive): Add first_token parameter.
* script.cc (script_include_directive): Add first_token parameter, and
pass it to read_script_file.
* yyscript.y (PARSING_SECTIONS_BLOCK, PARSING_SECTION_CMDS)
(PARSING_MEMORY_DEF): New tokens.
(top): Add new productions for INCLUDE files.
(file_cmd): Replace file_or_sections_cmd with copy of its productions.
Pass PARSING_LINKER_SCRIPT to script_include_directive.
(section_block_cmd): Likewise; pass PARSING_SECTIONS_BLOCK.
(section_cmd): Pass PARSING_SECTION_CMDS.
(file_or_sections_cmd): Remove.
(memory_def): Pass PARSING_MEMORY_DEF.
* testsuite/Makefile.am (memory_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/memory_test_inc.t: New script file.
* testsuite/memory_test_inc_1.t.src: New script file.
* testsuite/memory_test_inc_2.t.src: New script file.
* testsuite/memory_test_inc_3.t.src: New script file.
Cary Coutant [Sun, 22 Mar 2015 01:50:11 +0000 (18:50 -0700)]
Support compressed debug sections in dynamic object files.
This patch adds support for reading compressed debug info in
shared objects. It actually simplifies things, by moving the
support for compressed sections all the way up to the top-level
Object class, eliminating the need for several virtual methods.
gold/
* dwp.cc (Sized_relobj_dwo::do_section_contents): Delete.
(Sized_relobj_dwo::setup): Build compressed section map.
(Sized_relobj_dwo::do_decompressed_section_contents): Delete.
* dynobj.cc (Sized_dynobj::base_read_symbols): Build compressed
section map.
* object.cc (Sized_relobj_file::Sized_relobj_file): Remove
compressed_sections_ field.
(build_compressed_section_map): Take Object instead of
Sized_relobj_file parameter; add decompress_if_needed parameter.
(Sized_relobj_file::do_find_special_sections): Store compressed
section map in parent Object.
(Sized_relobj_file::do_decompressed_section_contents): Move
implementation to Object::decompressed_section_contents.
(Sized_relobj_file::do_discard_decompressed_sections): Move
implementation to Object::discard_decompressed_sections.
* object.h (build_compressed_section_map): Declare.
(Object::Object): Add compressed_sections_ field.
(Object::section_is_compressed): Move implementation here.
(Object::decompressed_section_contents): De-virtualize.
(Object::discard_decompressed_sections): De-virtualize.
(Object::do_section_is_compressed): Delete.
(Object::do_decompressed_section_contents): Delete.
(Object::set_compressed_sections): New method.
(Object::compressed_sections): New method.
(Object::compressed_sections_): New data member.
(Compressed_section_info, Compressed_section_map): Move to top of file.
(Sized_relobj_file::do_section_is_compressed): Delete.
(Sized_relobj_file::do_decompressed_section_contents): Delete.
(Sized_relobj_file::do_discard_decompressed_sections): Delete.
(Sized_relobj_file::compressed_sections_): Move to Object class.
Cary Coutant [Sun, 22 Mar 2015 00:47:49 +0000 (17:47 -0700)]
Fix internal error in do_relocate_sections when using plugins.
In a previous patch for PR 14675, to fix a problem with
the .eh_frame section when static linking, I added a step to
finalize the .eh_frame section at the end of the first link
pass. This patch caused PR 18152, where a plugin-claimed
object caused a non-claimed object's layout to be deferred
until replacement files were read. The call to
finalize_eh_frame_section() is happening before the layout of
the deferred objects, leading to the internal error in
do_relocate_sections.
This patch moves the finalization of the .eh_frame section to
after deferred objects have been processed.
gold/
PR gold/14675
PR gold/18152
* gold.cc (queue_middle_tasks): Finalize .eh_frame after laying out
deferred objects.
GDB Administrator [Sun, 22 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Eli Zaretskii [Sat, 21 Mar 2015 08:48:34 +0000 (10:48 +0200)]
Fix undefined behavior in TUI's TAB expansion
gdb/ChangeLog:
* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
before the second loop, to avoid undefined behavior. Reported by
Anton Blanchard <anton@samba.org>.
GDB Administrator [Sat, 21 Mar 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Keven Boell [Fri, 20 Mar 2015 21:45:20 +0000 (17:45 -0400)]
[gdb/DWARF] Introduce linked list for dynamic attributes
This patch introduces a linked list for dynamic attributes of a type.
This is a pre-work for the Fortran dynamic array support. The Fortran
dynamic array support will add more dynamic attributes to a type.
As only a few types will have such dynamic attributes set, a linked
list is more efficient in terms of memory consumption than adding
multiple attributes to main_type.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_type_internal): Adapt
data_location usage to linked list.
(resolve_dynamic_type_internal): Adapt data_location to
linked list.
(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
(copy_type_recursive, copy_type): Add copy of linked list.
* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
(struct dynamic_prop_list): New struct.
* dwarf2read.c (set_die_type): Set data_location data.
Pedro Alves [Mon, 9 Mar 2015 11:58:23 +0000 (11:58 +0000)]
constify i386-sol2-tdep.c and machoread.c
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c: In function ‘const char* i386_sol2_static_transform_name(const char*)’:
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c:93:29: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strrchr (name, '.');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
inner block and make it const.
* machoread.c (get_archive_prefix_len): Make "lparen" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:21 +0000 (11:58 +0000)]
constify set_breakpoint_condition
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
* breakpoint.h (set_breakpoint_condition): Update declaration.
Pedro Alves [Mon, 9 Mar 2015 11:58:20 +0000 (11:58 +0000)]
constify tui/tui-io.c
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* tui/tui-io.c (tui_expand_tabs): Make "s1" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:20 +0000 (11:58 +0000)]
constify xcoffread.c
/home/pedro/gdb/mygit/src/gdb/xcoffread.c: In function ‘void scan_xcoff_symtab(objfile*)’:
/home/pedro/gdb/mygit/src/gdb/xcoffread.c:2644:33: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strchr (namestring, ':');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:19 +0000 (11:58 +0000)]
constify remote-m32r-sdi.c
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* remote-m32r-sdi.c (m32r_open): Make "port_str" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:14 +0000 (11:58 +0000)]
constify nto-tdep.c
/home/pedro/gdb/mygit/src/gdb/nto-tdep.c: In function ‘int nto_find_and_open_solib(char*, unsigned int, char**)’:
/home/pedro/gdb/mygit/src/gdb/nto-tdep.c:111:14: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
endian = gdbarch_byte_order (target_gdbarch ())
^
/home/pedro/gdb/mygit/src/gdb/nto-tdep.c: In function ‘void nto_init_solib_absolute_prefix()’:
/home/pedro/gdb/mygit/src/gdb/nto-tdep.c:170:14: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
endian = gdbarch_byte_order (target_gdbarch ())
^
gdb
2015-03-20 Pedro Alves <palves@redhat.com>
* nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
(nto_init_solib_absolute_prefix): Likewise.
Pedro Alves [Mon, 9 Mar 2015 11:58:09 +0000 (11:58 +0000)]
constify gdbserver/tracepoint.c
gdb/gdbserver/tracepoint.c:3647:7: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
gdb/gdbserver/tracepoint.c:3652:7: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
gdb/gdbserver/tracepoint.c:3657:7: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]
gdb/gdbserver
2015-03-20 Pedro Alves <palves@redhat.com>
* tracepoint.c (cmd_qtstatus): Make "str" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:08 +0000 (11:58 +0000)]
constify gdbserver/server.c
gdb/gdbserver/
2015-03-20 Pedro Alves <palves@redhat.com>
* server.c (handle_general_set): Make "req_str" const.
Pedro Alves [Mon, 9 Mar 2015 11:58:17 +0000 (11:58 +0000)]
constify sparc-sol2-tdep.c and spu-tdep.c
/home/pedro/gdb/mygit/src/gdb/sparc-sol2-tdep.c: In function ‘const char* sparc_sol2_static_transform_name(const char*)’:
/home/pedro/gdb/mygit/src/gdb/sparc-sol2-tdep.c:247:35: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
char *p = strrchr (name, '.');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
* spu-tdep.c (spu_gdbarch_init): Make "name" const.
Jan Kratochvil [Fri, 20 Mar 2015 16:15:15 +0000 (17:15 +0100)]
Remove gdb.hp
gdb/ChangeLog
2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* config/djgpp/README: Remove gdb.hp.
gdb/testsuite/ChangeLog
2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
* README: Remove HP-UX and gdb.hp.
(configuration):
* configure: Regenerate.
* configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
gdb.hp/gdb.defects/Makefile.
* gdb.hp/Makefile.in: File deleted.
* gdb.hp/gdb.aCC/Makefile.in: File deleted.
* gdb.hp/gdb.aCC/optimize.c: File deleted.
* gdb.hp/gdb.aCC/optimize.exp: File deleted.
* gdb.hp/gdb.aCC/run.c: File deleted.
* gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
* gdb.hp/gdb.base-hp/Makefile.in: File deleted.
* gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
* gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
* gdb.hp/gdb.base-hp/dollar.c: File deleted.
* gdb.hp/gdb.base-hp/dollar.exp: File deleted.
* gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
* gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
* gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
* gdb.hp/gdb.base-hp/pxdb.c: File deleted.
* gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
* gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
* gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
* gdb.hp/gdb.base-hp/reg.exp: File deleted.
* gdb.hp/gdb.base-hp/reg.s: File deleted.
* gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
* gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
* gdb.hp/gdb.compat/Makefile.in: File deleted.
* gdb.hp/gdb.compat/average.c: File deleted.
* gdb.hp/gdb.compat/sum.c: File deleted.
* gdb.hp/gdb.compat/xdb.c: File deleted.
* gdb.hp/gdb.compat/xdb0.c: File deleted.
* gdb.hp/gdb.compat/xdb0.h: File deleted.
* gdb.hp/gdb.compat/xdb1.c: File deleted.
* gdb.hp/gdb.compat/xdb1.exp: File deleted.
* gdb.hp/gdb.compat/xdb2.exp: File deleted.
* gdb.hp/gdb.compat/xdb3.exp: File deleted.
* gdb.hp/gdb.defects/Makefile.in: File deleted.
* gdb.hp/gdb.defects/bs14602.c: File deleted.
* gdb.hp/gdb.defects/bs14602.exp: File deleted.
* gdb.hp/gdb.defects/solib-d.c: File deleted.
* gdb.hp/gdb.defects/solib-d.exp: File deleted.
* gdb.hp/gdb.defects/solib-d1.c: File deleted.
* gdb.hp/gdb.defects/solib-d2.c: File deleted.
* gdb.hp/gdb.objdbg/Makefile.in: File deleted.
* gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
* gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
* gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
* gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
* gdb.hp/tools/odump: File deleted.
H.J. Lu [Fri, 20 Mar 2015 11:39:04 +0000 (04:39 -0700)]
Limit multi-byte nop instructions to 10 bytes
There is no performance advantage to use multi-byte nop instructions
greater than 10 bytes. This patch limits multi-byte nop instructions
to 10 bytes. Since there is only one way to encode multi-byte nop
instructions now, it also removed redundant nop tests.
gas/
* config/tc-i386.c (i386_align_code): Limit multi-byte nop
instructions to 10 bytes.
gas/testsuite/
* gas/i386/i386.exp: Don't run nops-1-bdver1, nops-1-bdver2,
nops-1-bdver3, nops-1-bdver4, nops-1-znver1, nops-1-btver1
nops-1-btver2, x86-64-nops-1-nocona, x86-64-nops-1-bdver1,
x86-64-nops-1-bdver2, x86-64-nops-1-bdver3, x86-64-nops-1-bdver4,
x86-64-nops-1-znver1, x86-64-nops-1-btver1 nor
x86-64-nops-1-btver2.
* gas/i386/nops-1-core2.d: Updated.
* gas/i386/nops-1-k8.d: Likewise.
* gas/i386/nops-4a-i686.d: Likewise.
* gas/i386/nops-5-i686.d: Likewise.
* gas/i386/nops-5.d: Likewise.
* gas/i386/nops-6.d: Likewise.
* gas/i386/x86-64-nops-1-core2.d: Likewise.
* gas/i386/x86-64-nops-1-g64.d: Likewise.
* gas/i386/x86-64-nops-1-k8.d: Likewise.
* gas/i386/x86-64-nops-1.d: Likewise.
* gas/i386/x86-64-nops-2.d: Likewise.
* gas/i386/x86-64-nops-3.d: Likewise.
* gas/i386/x86-64-nops-4-core2.d: Likewise.
* gas/i386/x86-64-nops-4-k8.d: Likewise.
* gas/i386/x86-64-nops-4.d: Likewise.
* gas/i386/x86-64-nops-5-k8.d: Likewise.
* gas/i386/x86-64-nops-5.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-core2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1.d: Likewise.
* gas/i386/ilp32/x86-64-nops-2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-3.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4-core2.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops-4.d: Likewise.
* gas/i386/ilp32/x86-64-nops-5-k8.d: Likewise.
* gas/i386/ilp32/x86-64-nops-5.d: Likewise.
* gas/i386/nops-1-bdver1.d: Removed.
* gas/i386/nops-1-bdver2.d: Likewise.
* gas/i386/nops-1-bdver3.d: Likewise.
* gas/i386/nops-1-bdver4.d: Likewise.
* gas/i386/nops-1-btver1.d: Likewise.
* gas/i386/nops-1-btver2.d: Likewise.
* gas/i386/nops-1-znver1.d: Likewise.
* gas/i386/x86-64-nops-1-bdver1.d: Likewise.
* gas/i386/x86-64-nops-1-bdver2.d: Likewise.
* gas/i386/x86-64-nops-1-bdver3.d: Likewise.
* gas/i386/x86-64-nops-1-bdver4.d: Likewise.
* gas/i386/x86-64-nops-1-btver1.d: Likewise.
* gas/i386/x86-64-nops-1-btver2.d: Likewise.
* gas/i386/x86-64-nops-1-nocona.d: Likewise.
* gas/i386/x86-64-nops-1-znver1.d: Likewise.
* gas/i386/ilp32/x86-64-nops-1-nocona.d: Likewise.
Nick Clifton [Fri, 20 Mar 2015 10:29:46 +0000 (10:29 +0000)]
Fixes implementation of hardware multiply/divide peripheral in RL78 G13 cores.
* load.c (rl78_load): If the G10, G13 or G14 flag bits are set in
the ELF header use them to select the proper emulation mode.
* mem.c (mem_put_byte): Use mem_put_hi to store a value into the
MDB register.
(mem_get_byte): Use mem_get_hi to extract a value from the MDB
register.
Yao Qi [Fri, 20 Mar 2015 10:15:21 +0000 (10:15 +0000)]
Don't call set_gdbarch_cannot_step_breakpoint in aarch64_gdbarch_init
Hi,
I am looking at the following fails in aarch64-linux,
stepi^M
47 NOP; /* after permanent bp */^M
(gdb) FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: stepi signal with handler: single-step to handler
the test expects GDB single step into signal handler, but GDB doesn't.
The code in infrun.c:resume
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
if (gdbarch_cannot_step_breakpoint (gdbarch))
step = 0;
change the intended action from "step" to "continue". The gdbarch method
cannot_step_breakpoint isn't documented well, and I don't get much clue
after explore the history. However, from the comments above,
aarch64-linux can step a breakpoint instruction, so don't need to call
set_gdbarch_cannot_step_breakpoint.
gdb:
2015-03-20 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
set_gdbarch_cannot_step_breakpoint.
GDB Administrator [Fri, 20 Mar 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Thu, 19 Mar 2015 15:12:33 +0000 (15:12 +0000)]
Fix race exposed by gdb.threads/killed.exp
On GNU/Linux, this test sometimes FAILs like this:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/killed
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
ptrace: No such process.
(gdb)
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
Note the suspicious "No such process" line (that's errno==ESRCH).
Adding debug output we see:
linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Stopped (signal) (stopped)
LNW: waitpid(-1, ...) returned 18461, ERRNO-OK
LLW: waitpid 18461 received Trace/breakpoint trap (stopped)
LLW: Handling extended status 0x03057f
LHEW: Got clone event from LWP 18461, new child is LWP 18465
LNW: waitpid(-1, ...) returned 0, ERRNO-OK
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
sigchld
ptrace: No such process.
(gdb) linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Killed (terminated)
LLW: LWP 18465 exited.
LNW: waitpid(-1, ...) returned 18461, No child processes
LLW: waitpid 18461 received Killed (terminated)
Process 18461 exited
LNW: waitpid(-1, ...) returned -1, No child processes
LLW: exit
sigchld
infrun: target_wait (-1, status) =
infrun: 18461 [process 18461],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
The issue is that here:
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
The first line shows we had just resumed LWP 18465, which does:
void *
child_func (void *dummy)
{
kill (pid, SIGKILL);
exit (1);
}
So if the kernel manages to schedule that thread fast enough, the
process may be killed before GDB has a chance to resume LWP 18461.
GDBserver has code at the tail end of linux_resume_one_lwp to cope
with this:
~~~
ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread),
(PTRACE_TYPE_ARG3) 0,
/* Coerce to a uintptr_t first to avoid potential gcc warning
of coercing an 8 byte integer to a 4 byte pointer. */
(PTRACE_TYPE_ARG4) (uintptr_t) signal);
current_thread = saved_thread;
if (errno)
{
/* ESRCH from ptrace either means that the thread was already
running (an error) or that it is gone (a race condition). If
it's gone, we will get a notification the next time we wait,
so we can ignore the error. We could differentiate these
two, but it's tricky without waiting; the thread still exists
as a zombie, so sending it signal 0 would succeed. So just
ignore ESRCH. */
if (errno == ESRCH)
return;
perror_with_name ("ptrace");
}
~~~
However, that's not a complete fix, because between starting to handle
the resume request and getting that PTRACE_CONTINUE, we run other
ptrace calls that can also fail with ESRCH, and that end up throwing
an error (with perror_with_name).
In the case above, I indeed sometimes see resume_stopped_resumed_lwps
fail in the registers read:
resume_stopped_resumed_lwps (struct lwp_info *lp, void *data)
{
...
CORE_ADDR pc = regcache_read_pc (regcache);
Or e.g., in 32-bit mode, i386_linux_resume has several calls that can
throw too.
Whether to ignore ptrace errors or not depends on context that is only
available somewhere up the call chain. So the fix is to let ptrace
errors throw as they do today, and wrap the resume request in a
TRY/CATCH that swallows it iff the lwp that we were trying to resume
is no longer ptrace-stopped.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
(resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
swallows errors if the LWP is gone. Use
linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
Pedro Alves [Thu, 19 Mar 2015 17:00:55 +0000 (17:00 +0000)]
Remove spurious gdb/ChangeLog entry
My last change added the same entry to both gdbserver's and gdb's
ChangeLogs by mistake... Should have gone to gdbserver's only.
Pedro Alves [Thu, 19 Mar 2015 16:51:09 +0000 (16:51 +0000)]
gdbserver/Linux: unbreak non-stop
The previous change added an assertion that is catching yet another
bug in count_events_callback/select_event_lwp_callback:
(gdb)
PASS: gdb.mi/mi-nonstop.exp: interrupted
mi_expect_interrupt: expecting: \*stopped,(reason="signal-received",signal-name="0",signal-meaning="Signal 0"|reason="signal-received",signal-name="SIGINT",signal-meaning="Interrupt")[^
]*
/home/pedro/gdb/mygit/src/gdb/gdbserver/linux-low.c:2329: A problem internal to GDBserver has been detected.
select_event_lwp: Assertion `num_events > 0' failed.
=thread-group-exited,id="i1"
Certainly select_event_lwp_callback should always at least find one
event, as it's only called because an event triggered (though we may
have more than one: the point of the function is randomly picking
one).
An LWP that GDB previously asked to continue/step (thus is resumed)
and gets a vCont;t request ends up with last_resume_kind ==
resume_stop. These functions in gdbserver used to filter out events
that weren't going to be reported to GDB; I think the last_resume_kind
kind check used to make sense at that point, but it no longer does.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
No longer check whether the thread has resume_stop as last resume
kind.
Nick Clifton [Thu, 19 Mar 2015 15:37:43 +0000 (15:37 +0000)]
Add support for G13 and G14 flag bits in RL78 ELF binaries.
inc * rl78.h (E_FLAG_RL78_G10): Redefine.
(E_FLAG_RL78_CPU_MASK, E_FLAG_RL78_ANY_CPU, E_FLAG_RL78_G13
E_FLAG_RL78_G14): New flags.
bin * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags.
gas * config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
bfd * elf32-rl78.c (rl78_cpu_name): New function. Prints the name of
the RL78 core based upon the flags.
(rl78_elf_merge_private_bfd_data): Handle merging of G13 and G14
flags.
(rl78_elf_print_private_bfd_data): Use rl78_cpu_name.
(elf32_rl78_machine): Always return bfd_mach_rl78.
Pedro Alves [Sun, 15 Mar 2015 19:35:26 +0000 (19:35 +0000)]
gdbserver/Linux: unbreak thread event randomization
Wanting to make sure the new continue-pending-status.exp test tests
both cases of threads 2 and 3 reporting an event, I added counters to
the test, to make it FAIL if events for both threads aren't seen.
Assuming a well behaved backend, and given a reasonable number of
iterations, it should PASS.
However, running that against GNU/Linux gdbserver, I found that
surprisingly, that FAILed. GDBserver always reported the breakpoint
hit for the same thread.
Turns out that I broke gdbserver's thread event randomization
recently, with git commit
582511be ([gdbserver] linux-low.c: better
starvation avoidance, handle non-stop mode too). In that commit I
missed that the thread structure also has a status_pending_p field...
The end result was that count_events_callback always returns 0, and
then if no thread is stepping, select_event_lwp always returns the
event thread. IOW, no randomization is happening at all. Quite
curious how all the other changes in that patch were sufficient to fix
non-stop-fair-events.exp anyway even with that broken.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
Use the lwp's status_pending_p field, not the thread's.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.exp (saw_thread_2)
(saw_thread_3): New globals.
(top level): Increment them when an event for the corresponding
thread is seen.
(no thread starvation): New test.
Pedro Alves [Thu, 19 Mar 2015 12:20:25 +0000 (12:20 +0000)]
native/Linux: internal error if resume is short-circuited
If the linux_nat_resume's short-circuits the resume because the
current thread has a pending status, and, a thread with a higher
number was previously stopped for a breakpoint, GDB internal errors,
like:
/home/pedro/gdb/mygit/src/gdb/linux-nat.c:2590: internal-error: status_callback: Assertion `lp->status != 0' failed.
Fix this by make status_callback bail out earlier. GDBserver is
already doing the same.
New test added that exercises this.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (status_callback): Return early if the LWP has no
status pending.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.c: New file.
* gdb.threads/continue-pending-status.exp: New file.
Pedro Alves [Thu, 19 Mar 2015 12:24:06 +0000 (12:24 +0000)]
select_event_lwp_callback: update comments
This function (in both GDB and GDBserver) used to consider only
SIGTRAP/breakpoint events, but that's no longer the case nowadays.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (select_event_lwp_callback): Update comments to
no longer mention SIGTRAP.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (select_event_lwp_callback): Update comment to no
longer mention SIGTRAP.
Nick Clifton [Thu, 19 Mar 2015 12:14:56 +0000 (12:14 +0000)]
Fix building and testing dwarf debug section compression feature when zlib is not available.
PR gas/18087
gas/test * gas/i386/dw2-compress-1.d: Allow the test to pass regardless of
whether the .debug_info section was compressed on not.
bfd * compress.c (bfd_compress_section_contents): Do not define this
function if it is not used.
GDB Administrator [Thu, 19 Mar 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Wed, 18 Mar 2015 19:28:08 +0000 (19:28 +0000)]
Tighten gdb.base/disp-step-syscall.exp
This fixes several problems with this test.
E.g,. with --target_board=native-extended-gdbserver on x86_64 Fedora
20, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
And with --target=native-gdbserver, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
KPASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS server/13796)
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
First, the lack of fork support on remote targets is supposed to be
kfailed, so the KPASS is obviously bogus. The extended-remote board
should have KFAILed too.
The problem is that the test is using "is_remote" instead of
gdb_is_target_remote.
And then, I get:
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
stepi
Program terminated with signal SIGSEGV, Segmentation fault.
The program no longer exists.
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork
Obviously, that should be a FAIL. The problem is that the test only
expects SIGILL, not SIGSEGV. It also doesn't bail correctly if an
internal error or some other pattern caught by gdb_test_multiple
matches. The test doesn't really need to match specific exits/crashes
patterns, if the PASS regex is improved, like in ...
... this and the other "stepi" tests are a bit too lax, passing on
".*". This tightens those up to expect "x/i" and the "=>" current PC
indicator, like in:
1: x/i $pc
=> 0x3b36abc9e2 <vfork+34>: syscall
On x86_64 Fedora 20, I now get a quick KFAIL instead of timeouts with
both the native-extended-gdbserver and native-gdbserver boards:
PASS: gdb.base/disp-step-syscall.exp: vfork: delete break vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: continue to syscall insn vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
KFAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS: server/13796)
and a full pass with native testing.
gdb/testsuite/
2015-03-18 Pedro Alves <palves@redhat.com>
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Use gdb_is_target_remote instead of is_remote. Use
gdb_test_multiple instead of gdb_expect. Exit early if
gdb_test_multiple hits its internal matches. Tighten stepi tests
expected output. Fail on exit with any signal, instead of just
SIGILL.
H.J. Lu [Wed, 18 Mar 2015 18:20:06 +0000 (11:20 -0700)]
Make bfd_compress_section_contents static
* compress.c (bfd_compress_section_contents): Make it static.
* bfd/bfd-in2.h: Regenerated.
H.J. Lu [Wed, 18 Mar 2015 16:20:38 +0000 (09:20 -0700)]
Add a testcase for PR gas/18087
PR gas/18087
* gas/i386/dw2-compress-1.d: Revert the last change.
* gas/i386/dw2-compress-3.d: New.
* gas/i386/dw2-compress-3.s: Likewise.
* gas/i386/i386.exp: Run dw2-compress-3 for ELF targets.
Nick Clifton [Wed, 18 Mar 2015 16:19:59 +0000 (16:19 +0000)]
Fixes a problem generating relocs for import libraries created by Microsoft tools for the x85_64 architecture.
PR ld/16598
* peicode.h (pe_ILF_build_a_bfd): Add support for creating relocs
suitable for the AMD64.
Jon Turney [Wed, 18 Mar 2015 15:47:13 +0000 (15:47 +0000)]
Fix debug section compression so that it is only performed if it would make the section smaller.
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
Tristan Gingold [Thu, 5 Mar 2015 13:36:32 +0000 (14:36 +0100)]
Fix amd64 windows unwinding issues within MS dlls.
Unwind info in system dlls uses almost all possible codes, contrary to unwind
info generated by gcc. A few issues have been discovered: incorrect handling
of SAVE_NONVOL opcodes and incorrect in prologue range checks. Furthermore I
added comments not to forget what has been investigated.
gdb/ChangeLog:
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
redirection code to ...
(amd64_windows_frame_decode_insns): ... Here. Fix in prologue
checks. Fix SAVE_NONVOL operations. Add debug code and comments.
Gary Benson [Wed, 18 Mar 2015 11:19:02 +0000 (11:19 +0000)]
Reimplement "vFile:fstat" without qSupported
This commit makes support for the "vFile:fstat" packet be detected
by probing rather than using qSupported, for consistency with the
other vFile: packets.
gdb/ChangeLog:
(remote_protocol_features): Remove the "vFile:fstat" feature.
(remote_hostio_fstat): Probe for "vFile:fstat" support.
gdb/doc/ChangeLog:
* gdb.texinfo (General Query Packets): Remove documentation
for now-removed vFile:fstat qSupported features.
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Do not report vFile:fstat as supported.
Yao Qi [Wed, 18 Mar 2015 10:47:45 +0000 (10:47 +0000)]
Support catch syscall on aarch64 linux
Hi,
This patch is to support catch syscall on aarch64 linux. We
implement gdbarch method get_syscall_number for aarch64-linux,
and add aarch64-linux.xml file, which looks straightforward, however
the changes to test case doesn't.
First of all, we enable catch-syscall.exp on aarch64-linux target,
but skip the multi_arch testing on current stage. I plan to touch
multi arch debugging on aarch64-linux later.
Then, when I run catch-syscall.exp on aarch64-linux, gcc errors that
SYS_pipe isn't defined. We find that aarch64 kernel only has pipe2
syscall and libc already convert pipe to pipe2. As a result, I change
catch-syscall.c to use SYS_pipe if it is defined, otherwise use
SYS_pipe2 instead. The vector all_syscalls in catch-syscall.exp can't
be pre-determined, so I add a new proc setup_all_syscalls to fill it,
according to the availability of SYS_pipe.
Regression tested on {x86_64, aarch64}-linux x {native, gdbserver}.
gdb:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* aarch64-linux-tdep.c: Include xml-syscall.h
(aarch64_linux_get_syscall_number): New function.
(aarch64_linux_init_abi): Call
set_gdbarch_get_syscall_number.
* syscalls/aarch64-linux.xml: New file.
gdb/testsuite:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
variable.
* gdb.base/catch-syscall.exp: Don't skip it on
aarch64*-*-linux* target. Remove elements in all_syscalls.
(test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
target.
(setup_all_syscalls): New proc.
Chen Gang [Wed, 18 Mar 2015 01:12:19 +0000 (11:42 +1030)]
Use %F instead of %X for einfo
When src or dst is NULL, the next fread or fwrite will cause a
segmentation fault, so we need to treat it as fatal.
* ldmain.c (main): Use %F instead of %X for einfo.
H.J. Lu [Wed, 18 Mar 2015 00:05:38 +0000 (17:05 -0700)]
Exclude target-zlib if target-libjava isn't built
* configure.ac (target_configdirs): Exclude target-zlib if
target-libjava isn't built.
* configure: Regenerated.
H.J. Lu [Wed, 18 Mar 2015 00:01:54 +0000 (17:01 -0700)]
Revert "Disable all target libraries if not building gcc"
This reverts commit
35fece71d50e1883e67fcd28c69245de4335b8b5.
GDB Administrator [Wed, 18 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Jiri Gaisler [Tue, 17 Mar 2015 21:02:39 +0000 (22:02 +0100)]
sim/erc32: Removed type mismatch compiler warnings
Jiri Gaisler [Tue, 17 Mar 2015 21:02:38 +0000 (22:02 +0100)]
sim/erc32: Added -v command line switch for verbose output
Ganesh Gopalasubramanian [Tue, 17 Mar 2015 16:19:15 +0000 (21:49 +0530)]
Add znver1 processor
Yurij Grechishhev [Tue, 17 Mar 2015 14:11:20 +0000 (10:11 -0400)]
Fix name of ser_base_setstopbits's second argument.
Small copy/paste error, most likely...
gdb/ChangeLog:
* ser-base.h (ser_base_setstopbits): Change second argument name
from "rate" to "num".
H.J. Lu [Tue, 17 Mar 2015 12:15:34 +0000 (05:15 -0700)]
Sync config-ml.in with GCC trunk
Sync with GCC
2014-06-13 Thomas Schwinge <thomas@codesourcery.com>
* config-ml.in: Robustify ac_configure_args parsing.
Gary Benson [Tue, 17 Mar 2015 11:26:09 +0000 (11:26 +0000)]
Remove forward declaration of struct stat
Forward declarations of struct stat break the Windows build.
This commit removes a forward declaration of struct stat and
includes sys/stat.h directly instead.
gdb/ChangeLog:
PR gdb/18131
* common/common-remote-fileio.h (sys/stat.h): New include.
(stuct stat): Remove forward declaration.
Alan Modra [Mon, 16 Mar 2015 23:46:51 +0000 (10:16 +1030)]
Fix elf64-ppc.c electric fence warning
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Return count of 0
on nothing to do, before malloc of returned symbol array.
GDB Administrator [Tue, 17 Mar 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Fri, 13 Mar 2015 10:56:01 +0000 (10:56 +0000)]
watchpoint-reuse-slot.exp: skip setting HW breakpoints on some address
We see some fails in watchpoint-reuse-slot.exp on aarch64-linux, because
it sets some HW breakpoint on some address doesn't meet the alignment
requirements by kernel, kernel will reject the
ptrace (PTRACE_SETHBPREGS) call, and some fails are caused, for example:
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 0: delete $bpnum
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 80 at 0x410a61^M
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
stepi^M
Warning:^M
Cannot insert hardware breakpoint 80.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: stepi advanced
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 440 at 0x410a61^M
Warning:^M
Cannot insert hardware breakpoint 440.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted on: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
This patch is to skip some tests by checking proc valid_addr_p.
We can handle other targets in valid_addr_p too.
gdb/testsuite:
2015-03-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
(top level): Skip tests if valid_addr_p returns false for
$cmd1 or $cmd2.
H.J. Lu [Mon, 16 Mar 2015 16:12:37 +0000 (09:12 -0700)]
Update top-level files from GCC trunk
* Makefile.def: Updated from GCC trunk.
* Makefile.tpl: Likewise.
* configure.ac: Likewise.
* Makefile.in: Regenerated.
* configure: Likewise.
H.J. Lu [Mon, 16 Mar 2015 15:51:37 +0000 (08:51 -0700)]
Sync isl.m4 with GCC tree
* isl.m4: Sync with GCC tree.
H.J. Lu [Mon, 16 Mar 2015 15:49:06 +0000 (08:49 -0700)]
Sync elf.m4 with GCC tree
Sync with GCC
2015-02-18 Thomas Schwinge <thomas@codesourcery.com>
* elf.m4 (ACX_ELF_TARGET_IFELSE): nvptx-*-none isn't ELF.
H.J. Lu [Mon, 16 Mar 2015 15:44:41 +0000 (08:44 -0700)]
Append -g -Os rather than overwriting
Sync with GCC
2014-11-17 Bob Dunlop <bob.dunlop@xyzzy.org.uk>
* mt-ospace (CFLAGS_FOR_TARGET): Append -g -Os rather than
overwriting.
(CXXFLAGS_FOR_TARGET): Similarly.
H.J. Lu [Mon, 16 Mar 2015 15:41:42 +0000 (08:41 -0700)]
Don't reset CXXFLAGS_FOR_TARGET
Sync with GCC
2014-04-25 Marc Glisse <marc.glisse@inria.fr>
PR target/43538
* mt-gnu: Don't reset CXXFLAGS_FOR_TARGET.
H.J. Lu [Mon, 16 Mar 2015 15:34:23 +0000 (08:34 -0700)]
Sync bootstrap-asan.mk/bootstrap-lto.mk with GCC tree
* bootstrap-asan.mk: Sync with GCC tree.
* bootstrap-lto.mk: Likewise.
H.J. Lu [Mon, 16 Mar 2015 15:31:47 +0000 (08:31 -0700)]
Remove cloog.m4
* cloog.m4: Removed.