git.libre-soc.org Git - buildroot.git/log

package/x11r7/xlib_libXvMC: remove xlib_libXv dependency

Since libXvMC 1.0.12, xv was removed from xvmc.pc [1].

[1] https://lists.x.org/archives/xorg-announce/2019-September/003023.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: add xlib_libXv dependency to mesa3d xvmc

From [1]

  "Prior to xvmc 1.0.12 libxvmc incorrectly required libxv, but that
   was fixed. This results in compilation failures for the gallium
   xvmc tracker and tools. This patch fixes that by explicitly linking
   to libxv."

Add xlib_libXv dependency to mesa3d when BR2_PACKAGE_MESA3D_XVMC is set.

[1] https://cgit.freedesktop.org/mesa/mesa/commit/?id=e456a053c3d6ec4f3d4581edcad05c72dfdaa407

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: enable llvm RTTI when needed

LLVM must be built with rtti (runtime type information) support
to build the Gallium Nouveau driver or the Clover OpenCL state
tracker when llvm support is enabled in mesa3d.

Fixes the build when BR2_PACKAGE_MESA3D_OPENCL is set:
"The Clover OpenCL state tracker requires rtti, you need to turn off clover or use an LLVM built with LLVM_ENABLE_RTTI."

This check was added by mesa3d 19.1:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=29912f2ea486fb8ffbc98db347679cf542422efe

Fixes the build when BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU and BR2_PACKAGE_MESA3D_LLVM are set
"The Nouveau driver requires rtti. You either need to turn off nouveau or use an LLVM built with LLVM_ENABLE_RTTI."

This check was added by mesa3d 19.0:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=a2596450ac7330c8965c819491038fb1ad454333

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: add llvm RTTI option

Allow to build LLVM with run-time type information as this feature is
needed (for example) by mesa3d's Gallium Nouveau driver or the Clover
OpenCL state tracker when llvm support is enabled in mesa3d.

While we only care about RTTI support in the target, we also need to
enable it in the host LLVM, so that llvm-config gives the proper
result.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: use libusb (for usb passthrough) if it's selected

This allows sharing a host USB port with the guest, which is helpful for
the upcoming libvirt package.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/initscripts: refactor S20urandom

Adapt the format to the current template, used in other init scripts,
but do not use start/stop functions due to peculiarities.

Treat RNG initialization and random seed backup as separate operations.

Read /proc/sys/kernel/random/poolsize to calculate the pool size, as
suggestred by the urandom manual page.

Ensure that the random seed file has the correct size to prevent dumping
an empty file to /dev/urandom on the first boot.

Save the seed at /var/lib/random-seed as other non-systemd distributions
do (e.g. RHEL6), since /etc can be in a red-only rootfs. The Filesystem
Hierarchy Standard defines that /var/lib holds persistent data modified
by programs as they run.

Users willing to use a different path just need to redefine URANDOM_SEED
in /etc/default/urandom instead of rewriting the init script.

[Peter: save/restore umask]
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qemu: enable NUMA support if numactl is selected

This is helpful for the upcoming libvirt package.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: properly order properties of BR2_GCC_SUPPORTS_DLANG

Fixes:

package/gcc/Config.in.host:84: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jitterentropy-library: drop consecutive empty lines

Fixes:

package/jitterentropy-library/jitterentropy-library.mk:24: consecutive empty lines

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libyang: fix build w/o threads

For building libyang a toolchain with thread support is needed. Add the dependancy
to BR2_TOOLCHAIN_HAS_THREADS.

Fixes:
- http://autobuild.buildroot.net/results/1d84ff4aab67a98113d967b65467109e80bb5917

Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xserver_xorg-server: switch to virtual opengl provider

This allows to use xserver_xorg-server without mesa3d.

Build-tested using this defconfig:

BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xserver_xorg-server: fix optional glx dependency

Typo was added by commit
https://git.buildroot.net/buildroot/commit/?id=c2856aa2857d616788684a053f1c886da00d977f

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: fix qemu 3.1.1.1 to build with glibc-2.29

These patches are already in qemu upstream under:
- 184943d827ce09375284e6fbb9fd5eeb9e369529
- 71ba74f67eaca21b0cc9d96f534ad3b9a7161400

They rename gettid() to sys_gettid() to avoid clash with glibc

Signed-off-by: Paulo Matos <pmatos@igalia.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/hwloc: bump to version 1.11.13

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpciaccess: add Libs.Private to pciaccess.pc

This will fix a static build failure for hwloc

Fixes:
- http://autobuild.buildroot.org/results/f100191acef41d42582ab2a35e1b6f264594f074

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external: add support for D language

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: add support for D language

Since version 9.1, GCC provides support for the D programming language [1].

So add a Kconfig entry to enable support for it.

[1] https://dlang.org/

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: add support for D language

Since version 9.1, GCC provides support for the D programming language [1].

So add an option to indicate the selected toolchain supports this
language.

[1] https://dlang.org/

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-spidev: bump to version 3.4

Package has been relicensed under the MIT license, and LICENSE.md has been
removed. The git repo has a LICENSE file, but it isn't available in the
tarball, so use the readme file instead.

https://github.com/doceme/py-spidev/commit/611b74341f44d444670fd373b1fb755ea2589718

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kmod: add patch fixing the build with Python 3.8

Since the bump of python3 to 3.8, the kmod Python extensions fail to
build. There was a change in Python 3.8: they no longer want Python
extensions to be linked with libpython.

However, kmod Python extensions are built with -Wl,--no-undefined,
which checks that there isn't any unresolved symbol in the .so files
being built. This is not compatible with the new Python policy, so we
add a patch (submitted upstream) that passes -Wl,-z,undefs when
building the kmod Python extensions, to override the effect of
-Wl,--no-undefined.

Fixes:

http://autobuild.buildroot.net/results/84455dbc892865b9748bedeecb1d3b0bdc15704d/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rng-tools: needs threads

Since the bump to 6.7 there is a new dependency on threads:

https://github.com/nhorman/rng-tools/commit/6952b8ae4736a9b8f58fd2ff330a423ea76cf515

Fixes:
http://autobuild.buildroot.net/results/fff63dd9a53eafe0234ad19f715f050527afedc8/

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/intel-mediasdk: bump version to 19.2.1

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/intel-mediadriver: bump version to 19.2.1

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/intel-gmmlib: bump version to 19.2.3

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 19.2.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openlayers: do not rely on install -D -t

Use a more standard $(INSTALL) -D solution instead of -D -t, as it
causes some failures in the autobuilders.

Fixes:

http://autobuild.buildroot.net/results/b473c44ae953dec3e4f88c4e363fb1a84b5e0dc8/

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus-python: fix build with python 3.8

test/import-repeatedly.c uses an embedded python interpreter
and PYTHON_EXTRA_LIBS is used only for building this test case,
so set PYTHON_EXTRA_LIBS with `python3-config --libs --embed`
to build this test case and don't link the module with libpython3.so.

Fixes:
- http://autobuild.buildroot.org/results/b30/b308eeb5c5d95ab9f1dbfc19f9183f2ba3ba0ce3/
- http://autobuild.buildroot.org/results/0dd/0dd9203f859b97ee5a3b6358644c26f8ab784ed8/
and many similar failures.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{llvm, clang, lld}: update comment to keep them at the same version.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lld: bump to version 9.0.0

Since v9.0.0, it was relicensed to the Apache License 2.0 with
LLVM Exceptions. Update the license file hash.

lld package must use the same version as llvm package.

llvm 9.0.0 renamed some define that break the build for lld <= 8.0.0.
https://github.com/llvm-mirror/lld/commit/66fca3a6b8cc0112a4c72237ffaea5eb4b659e3f

Fixes:
http://autobuild.buildroot.org/results/9a0/9a0534c4206b40963d32494ff9675543e78125d1

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ruby: enable openssl for host-ruby

Openssl is required so that Gem can install ruby gems from secure websites.

ERROR: While executing gem ... (Gem::Exception)
Unable to require openssl, install OpenSSL and rebuild ruby (preferred) or
use non-HTTPS sources

Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

packages/sox: unconditionaly disable custom SSP detection

sox implements a custom mechanism to detect whether the toolchain has
SSP suport or not. In doing so, it explicitly tries to see if libssp.so
is present, in which case it unconditionally links with it, even though
the compiler, if left by itself, would have used the SSP support
provided by the C library.

However, with Buildroot, the SSP options are handled in our gcc
wrapper, so packages should just not bother with that.

It turns out that, when sox is configured with --disable-stack-protector,
it does not disable it, but really does nothing, which is good for us.

Currently, SSP is conditionally disabled in sox, under various
conditions: that the toolchain does not have SSP, or that it is one of
the know SSP-challenged (i.e. broken) toolchains. Those conditions dates
back tpo before our wrapper started handling that.

Remove all those conditions, unconditionally disable SSP in sox, and let
our gcc wrapper handle the SSP options.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/external: copy libssp.so if SSP is enabled

In Buildroot, the internal toolchain backend uses the SSP support from
the C library, not that of gcc.

Some external toolchains come with SSP suport in gcc, which is
implemented in libssp.so, rather than in the C library.

When a toolchain even has both, it is up to the compiler to decide
whether it will link to libssp or use the support from the C library.

However, in the latter case, a (incorrectly written) package may decide
to explicitly link with libssp.so when it is available (even though the
compiler may have decided otherwise if left by itself). This is the case
for example with sox, which results in runtime failures, such as:

    $ sox
    sox: error while loading shared libraries: libssp.so.0: cannot open
    shared object file: No such file or directory

Even if sox is wrong in doing so, the case for libssp-only toolchains is
still valid, and we must copy it as we copy other libs.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jitterentropy-library: fix build failure due to missing -fPIC

jitterentropy-library needs -fPIC flag to build so add it when building.

Fixes:
http://autobuild.buildroot.net/results/505/5059207ec9ab0b502717626cc84956dafd0c3c32/

[Original: http://patchwork.ozlabs.org/patch/1182068/]
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jitterentropy-library: fix static build

Fixes:
- http://autobuild.buildroot.org/results/27b19c964c4457dca69639e1913ce44f010853ac

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jitterentropy-library: bump to version 2.2.0

- Refresh patch
- Update hash of COPYING (date updated, see
https://github.com/smuellerDD/jitterentropy-library/commit/ab33ee759ff09a1c9b1184fb2e4614d82c355c2f)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: Add option to enable USB passthrough support on host variant

USB passthrough is a useful feature while using qemu for debugging purpose.

[Peter: reword commit message, pass --disable-libusb if not enabled]
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lld: fix build with gcc < 5.1

This fix is based on commit 2a17fb6 used for llvm.

Fixes:
http://autobuild.buildroot.net/results/76310241a335a99a4ff2726edb517b067367fd41
http://autobuild.buildroot.net/results/88cbfae219fd4475be376c9558b5760cebd2148f

[Peter: adjust comment as suggested by Romain]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lld: create $(HOST_DIR)/$(GNU_TARGET_NAME)/bin before create symlinks

$(HOST_DIR)/$(GNU_TARGET_NAME)/bin directory may not exist before creating
lld symlinks.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joseph Kogut <joseph.kogut@gmail.com>
Tested-By: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libyang: fix up the 'v' prefix in the version

In order for the libyang version to match what is given by
release-monitoring.org, the 'v' prefix should be encoded in
LIBYANG_SITE and not LIBYANG_VERSION.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libnetconf2: fixup the 'v' prefix in the version

In order for the libnetconf2 version to match what is given by
release-monitoring.org, the 'v' prefix should be encoded in
LIBNETCONF2_SITE and not LIBNETCONF2_VERSION.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mobile-broadband-provider-info: needs host-libxslt

xsltproc is needed to build apn-conf since version 20190618 and
https://github.com/GNOME/mobile-broadband-provider-info/commit/6dd77065c3beb4aa32218d76ba27efb83d507f42

Fixes:
- http://autobuild.buildroot.org/results/824c5d67f12fa1a9ce31f2698eae986f14ca69ae

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/stm32mp157_dk_defconfig: switch to mainline 2019.07 U-Boot version

Switch to the official U-Boot repository since
the board has been officially supported.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/stm32mp157_dk_defconfig: switch to mainline 5.3.7 linux version

Switch to the official Linux repository since
the board has been officially supported.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: security bump version to 7.3.11

Changelog: http://www.php.net/ChangeLog-7.php#7.3.11

Fixes CVE-2019-11043: https://bugs.php.net/bug.php?id=78599

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: Add Nicolas Serafini for ofono

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-remi: bump version to 2019.9

* Release after 1.2.2 uses date instead of version, so suppress v character
appended before version

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libselinux: install Python modules to target

While LIBSELINUX_INSTALL_STAGING_CMDS uses
$(LIBSELINUX_MAKE_INSTALL_TARGETS), LIBSELINUX_INSTALL_TARGET_CMDS
does not use it. Due to this, the Python module is only installed to
$(STAGING_DIR) and not to $(TARGET_DIR).

Fix this by using $(LIBSELINUX_MAKE_INSTALL_TARGETS) in
LIBSELINUX_INSTALL_TARGET_CMDS.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/numactl: fix URL in help text

SGI is gone (RIP). Use the github project as landing page.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ofono: use external ell library

Add comments to the dependencies that also come from ell. Note that the
BR2_TOOLCHAIN_HAS_SYNC_4 is coming both from ell and from internal sync
calls, so no comment is added.

While we're at it, also order the selects and DEPENDENCIES
alphabetically.

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[Arnout: extend "reason" comments to Config.in; alphabetical ordering]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

DEVELOPERS: remove package/python-pysnmp-apps

Package was removed with commit
https://git.buildroot.net/buildroot/commit/?id=ae2781d7d74af7b7b94a30d7a26826de8e1b304f

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/util-linux: fix licence definition formatting

Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Reviewed-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libnss: remove useless NSS_ENABLE_ECC variable

NSS_ENABLE_ECC is not supported anymore, then remove it from our
libnss.mk file.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/snps_hsdk: Switch to archs38_full CPU option

Lets switch CPU option to archs38_full for HSDK to
get an increase in performance by using FPU extensions.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mobile-broadband-provider-info: bump version to 20190618

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pymodbus: fix typo in python-pymodbus.hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/iwd: disable man pages

Fixes:
- http://autobuild.buildroot.org/results/3f68bad231b18485871f24175001e1525501f35d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libnetconf2: new package

libnetconf2 is a NETCONF library in C intended for building
NETCONF clients and servers.

Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libyang: new package

LibYANG processes YIN and YANG files. It's a dependency of sysrepo
which is a dependency of Netopeer, a NETCONF/YANG server.

Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libavl: new package

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nodejs: fix check-package warnings

Fixes:

package/nodejs/nodejs.mk:73: expected indent with tabs
package/nodejs/nodejs.mk:74: expected indent with tabs
package/nodejs/nodejs.mk:75: expected indent with tabs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pysnmp-apps: remove package

The package was renamed to snmpclitools and is no longer maintained.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/snmpclitools: new package

For now, we use PKG-INFO as license file, since LICENSE.rst isn't
provided with the tarball.
A pull request was sent upstream:
https://github.com/etingof/snmpclitools/pull/11

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libva: switch to virtual opengl provider

This allows to use libva without mesa3d.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nodejs: bump version to 12.12.0

Removed libhttpparser dependency as nodejs now uses built in llhttp.

Installed additional build tools to host that are required for target build.

License file change is due to 3rd party dependency changes and date updates.

Dependencies still appear to have Apache and BSD family licenses.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pymodbus: switch back to github

pypi tarball does not contain the license file so switch back to github
until upstream fixes this issue, see
https://github.com/riptideio/pymodbus/issues/401

Fixes:
- http://autobuild.buildroot.org/results/6701b1e038b58fcd49240ceb7f972885e2e037aa

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: make wipefs depend on BR2_USE_MMU

It depends on libblkid and libsmartcols, which use fork().

Fixes:
http://autobuild.buildroot.net/results/82f9712bc90377c625caeb5b175e83a03d5b9d75/

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ofono: remove double empty line in .mk file

Detected by check-package.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ofono: remove autoreconf

The patch that required an autoreconf is no longer there since commit
a465dd54fc22423b4140441d8f29d55e249d5848 ("package/ofono: bump to
version 1.30")

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lttng-modules: bump version to 2.11.0

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lttng-tools: bump version to 2.11.0

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lttng-libust: bump version to 2.11.0

Remove
`0001-configure.ac-add-disable-examples-option-to-not-buil.patch` as
the `--disable-examples` option exists in LTTng-UST 2.11.0.

Also handle numactl as an optional dependency.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lxc: fix compilation with stub memfd_create

This fixes compilation issue in case memfd_create is a stub in libc.
Patch already merged in lxc master branch
(344b8ee293f4d3730a70a6ccaa03d7e4a516ae95).

Copy of the original commit log:

In case the internal memfd_create has to be used, make sure we don't
clash with the already existing memfd_create function from glibc.

This can happen if this glibc function is a stub. In this case, at
./configure time, the test for this function will return false, however
the declaration of that function is still available. This leads to
compilation errors.

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iwd: bump version to 0.22

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ell: bump version to 0.24

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tslib: update to 1.21

The release page https://github.com/libts/tslib/releases has the short
changelog overview and we include the added plugin when building statically
linked.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add Thomas Claveirole for openlayers

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rng-tools: bump to 6.7

* Switch to new site and add license file hash
* Add new libsysfs dependency for rng available check
* Remove patch adding special return code when no RNG module is available.
  This has been replaced by using the jitter library to always have a
  source (new jitterentropy dependency)
* Change to a autotools build and add patch to allow README file to not be
  found during autoreconfig

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jitterentropy-library: new package

New library to support rng-tools using a CPU source as a backup entropy
source when a kernel provided rng isn't present.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/at91bootstrap3: bump to version 3.9.0

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel_sama5d27_som1: bump to linux4sam_6.2

This commit :
- bumps Linux & U-Boot to linux4sam_6.2
- bumps at91bootstrap to v3.9.0

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sunwait: new package

Sunwait calculates sunrise or sunset times with civil, nautical,
astronomical and custom twilights.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- add dependency on C++
- improve the build logic to pass cflags/ldflags properly]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-asgiref: properly order "depends on" vs. bool

This fixes a check-package warning introduced by commit
9b746f8 ("package/python-asgiref: drop Python 2 support")
Fixes:

$: ./utils/check-package package/python-asgiref/*
package/python-asgiref/Config.in:3: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
34 lines processed
1 warnings generated

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libolm: new package

libolm is an implementation of the Double Ratchet cryptographic ratchet
described by:
https://whispersystems.org/docs/specifications/doubleratchet/

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/apr: Fix PATH_MAX detection by including sys/param.h if available

Fixes subversion build error.

Fixes:
http://autobuild.buildroot.net/results/d42/d42be423c1c6fe7e7c419976ff35a04e18dfb8dd/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: broken on or1k with gcc < 9.x

Fixes:
http://autobuild.buildroot.net/results/961/9618aeffa7d72162d6643a89470c4a01d044a2dc/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libtorrent: add Libs.Private to libtorrent.pc.in

This will fix a static build failure with rtorrent

Fixes:
- http://autobuild.buildroot.org/results/075598e1699c2ac20a4dfbcb5695bbb7343f9a86

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: clarify the reinstallation of a package

Since <package>-rebuild implies <package>-reinstall and
<package>-reconfigure implies <package>-rebuild, it is confusing
to mention the make and make <package> commands when describing
the restart of the configuration, compilation and installation of
the package.

Therefore remove the ", followed by +make+ or +make <package>+"
portions in the "8.3. Understanding how to rebuild packages" section,
and add a new paragraph clarifying how to include the rebuilt package
in the filesystem image, if that is necessary.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libwebsockets: fix static build with openssl

Fixes:
- http://autobuild.buildroot.org/results/65d0528b208c0a470264f7e2433be89425971dd7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openlayers: new package

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python{3}-setuptools: bump to version 41.4.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gd: add post-2.2.5 security fixes from upstream

Fixes the following security vulnerablities:

- CVE-2018-1000222: Libgd version 2.2.5 contains a Double Free Vulnerability
  vulnerability in gdImageBmpPtr Function that can result in Remote Code
  Execution .  This attack appear to be exploitable via Specially Crafted
  Jpeg Image can trigger double free

- CVE-2018-5711: gd_gif_in.c in the GD Graphics Library (aka libgd), as used
  in PHP before 5.6.33, 7.0.x before 7.0.27, 7.1.x before 7.1.13, and 7.2.x
  before 7.2.1, has an integer signedness error that leads to an infinite
  loop via a crafted GIF file, as demonstrated by a call to the
  imagecreatefromgif or imagecreatefromstring PHP function

- CVE-2019-11038: When using the gdImageCreateFromXbm() function in the GD
  Graphics Library (aka LibGD) 2.2.5, as used in the PHP GD extension in PHP
  versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6, it
  is possible to supply data that will cause the function to use the value
  of uninitialized variable.  This may lead to disclosing contents of the
  stack that has been left there by previous code

- CVE-2019-6978: The GD Graphics Library (aka LibGD) 2.2.5 has a double free
  in the gdImage*Ptr() functions in gd_gif_out.c, gd_jpeg.c, and gd_wbmp.c

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ltp-testsuite: enable build under musl

This requires to remove a lot of broken code until it's fixed in upstream.
Added 2 patches from upcoming release.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/boost: fix build with python 3.8

Fixes:
- http://autobuild.buildroot.org/results/81489f92ceb6287a4d6c52b2bb16a80e8c5c430a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tvheadend: bump version

Rebased patch.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libv4l: bump version to 1.18.0

- remove 0001-fixup-lfs-mismatch-in-preload-libraries.patch
  (Upstream applied [1])
- remove 0002-keytable-fix-EVIOCSCLOCKID-related-compile-failure.patch
  (Upstream applied [2])
- remove 0003-Build-sdlcam-only-if-jpeg-is-enabled.patch
  (Upstream applied [3])
- remove 0004-v4l2-compliance-needs-fork.patch
  (Upstream applied [4])

Despite all patches (specially the ones touching
configure.ac/Makefile.am) keep LIBV4L_AUTORECONF = YES to get correct
utils/qv4l linker flags (seems the original debian based libtool sets
a wrong link_all_deplibs parameter), see [5] for details.

[1] https://git.linuxtv.org/v4l-utils.git/commit/?id=9f0354c3320f3cc62983f726bfed66e1d0c21f83
[2] https://git.linuxtv.org/v4l-utils.git/commit/?id=a3367e92f4b06667a36fb9485f22f7df52891a2f
[3] https://git.linuxtv.org/v4l-utils.git/commit/?id=692c2f0f35dd663e84d363867f2841d387726154
[4] https://git.linuxtv.org/v4l-utils.git/commit/?id=577ab225929c4e8dce7d2b911eeed38469a559bb
[5] http://lists.busybox.net/pipermail/buildroot/2019-October/261558.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nano: bump version to 4.5

Release notes:
https://lists.gnu.org/archive/html/info-gnu/2019-10/msg00001.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/screen: bump version to 4.7.0

Release notes:
https://lists.gnu.org/archive/html/info-gnu/2019-10/msg00000.html

Removed patches applied upstream:

- 0001-compiler-sanity-checks.patch
https://git.savannah.gnu.org/cgit/screen.git/commit/?h=v.4.7.0&id=6b320186db7df1e58fdd2c836af54c86cc596981

- 0003-cross-compilation-AC_TRY_RUN.patch
https://git.savannah.gnu.org/cgit/screen.git/commit/?h=v.4.7.0&id=abba47ce4206506c49858d944e904fff86ae65cc

- 0004-cross-compilation-ignore-host-fs.patch
https://git.savannah.gnu.org/cgit/screen.git/commit/?h=v.4.7.0&id=c573b89139e7a068f5573abd565605bed60f293f

- 0005-avoid-identifying-as-SVR4.patch
https://git.savannah.gnu.org/cgit/screen.git/commit/?h=v.4.7.0&id=ec90292592dd2c9d5c108390841e3df24e377ed5

Rebased 0001-no-memcpy-fallback.patch

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>