board/freescale: use correct ahab-container.img file name

Commit 3f8ace002831a01ed6aec59b704bd92c8a3b957f
("board/freescale/common/imx: add support for i.MX8") had its
conflicts incorrectly tweaked when applied to Buildroot. The
ahab-container.img is installed with this name (ahab-container.img) by
the imx-firmware package, and not mx8qm-ahab-container.img or
mx8qx-ahab-container.img.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/brltty: use host pkg-config when building host tools

brltty builds host tools which rely on the expat library, and
pkg-config is used to detect the expat library.

Since commit cd16e18584066d2817d3acb3822e173f9f23455e ("pkgconf:
always keep system libs"), the wrapper script added
--keep-system-libs, which adds a -L$(STAGING_DIR)/usr/lib to the
pkg-config results instead of just -lexpat. So, previously, by chance,
the pkg-config result for the target expat was "good enough" for the
host expat as well. But now that -L$(STAGING_DIR)/usr/lib is added, it
breaks the build in all sort of ways as obviously building host
binaries with the library search path pointing to $(STAGING_DIR) is
not a good idea.

To fix that, this commit adjusts the brltty build system so that the
PKG_CONFIG_FOR_BUILD variable is used when using pkg-config to build
host binaries.

Fixes:

  http://autobuild.buildroot.net/results/5a64dfb845389882c366b6c91aaf5868c090a802/

Many thanks to the initial work from Fabrice Fontaine at
http://patchwork.ozlabs.org/patch/1238163/ which provided an initial
starting point for this investigation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/git: fix build failure due to gcc bug 93847

The git package exhibits gcc bug 93847 when built for the Nios2
architecture with optimization enabled, which causes a build failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_93847=y.

Fixes:
http://autobuild.buildroot.net/results/e225e62ea2d48660df4110790664f0c3306c1ea9/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_93847

git package fails to build for the Nios2 architecture with optimization
enabled with gcc < 9.x:
http://autobuild.buildroot.net/results/924/92484c49b655e4aa78ca52f124c6d8f605b9d06b/

It's been reported upstream:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93847

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-inputstream-adaptive: update LICENSE_FILES

Use LICENSE.GPL instead of src/main.cpp.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/aufs: add support for linux 5.x

Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Update for 2020.02-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fail2ban: The (host-python3) 2to3 utility needs to be present

During _POST_PATCH_HOOKS _DEPENDANCIES aren't guaranteed to be built,
however during _PRE_CONFIGURE_HOOKS they should be built.

Should fix:
http://autobuild.buildroot.net/results/dd8e225e2a49cfa6735bed11459007003a37c137/
http://autobuild.buildroot.net/results/e688c3652bd474ac682984e2e5947701942f0f57/

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/systemd: bump version to 244.3

For additional post-244 fixes.

Update the hash of the README after commit faba5b2b (Revert "Drop dbus
activation stub service") changed a comment about dbus:

-       dbus >= 1.11.0 (strictly speaking optional, but recommended)
+       dbus >= 1.4.0 (strictly speaking optional, but recommended)
+               NOTE: If using dbus < 1.9.18, you should override the default
+               policy directory (--with-dbuspolicydir=/etc/dbus-1/system.d).

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5: drop 5.6 support

As discussed during the FOSDEM2019 develop days, Qt 5.6 is very old (5.6.3
was released in September 2017, and 5.6.x became EOL in March 2019), so drop
it before the new Buildroot LTS release:

https://elinux.org/Buildroot:DeveloperDaysFOSDEM2019#Qt5_versions_to_support:_keep_5.6_or_a_newer_LTS.3F

And add legacy handling for it.

There are a number of places where code checks for
BR2_PACKAGE_QT5_VERSION_LATEST, so leave that as a blind option for now to
not break the build.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-tools: filter debugging symbols for hyperv

Workaround for:

ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
hv_vss_daemon.o: file not recognized: File format not recognized

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minicom: fix static linking with ncurses

Fixes:
 - http://autobuild.buildroot.org/results/d3edbab1f2cd0f7b790e2559dc8d489497ae02f3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.19.x / 5.4.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/armadillo: fix license

License is Apache-2.0 since version 7.800:
http://arma.sourceforge.net/license.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Config.in: add BR2_HOST_GCC_AT_LEAST_9

Fedora 30 switched to GCC 9.x. [1]

[1] https://fedoraproject.org/wiki/Changes/GCC9

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kvm-unit-tests: fix build with SSP

Add a patch to correct a typo in the Makefile, so -fno-stack-protector /
-fno-stack-protector-all are really used.  With this applied, kvm-unit-tests
will always be built without SSP as intented by upstream.  This will fix the
build on ppc64 with SSP that started to fail for an unknown reason since
November 27th.

Moreover, the Arch Linux workaround could also be removed in a follow-up
patch.

Fixes:
 - http://autobuild.buildroot.org/results/ad689b08173548af21dd1fb0e827fd561de6dfef

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fluidsynth: bump to version 2.1.1

- This will fix a static build failure with readline thanks to
  https://github.com/FluidSynth/fluidsynth/commit/c538c9fa7e392ce16c3354696e7dc7781a78a300
- Update indentation of hash file (two spaces)

Fixes:
 - http://autobuild.buildroot.org/results/88609eefe55af2ca50d43e17d3424b923528b07a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skeleton-init-openrc: fix root filesystem ro/rw remount

The regular expressions used in the sed commands assumes that there is a
space after '/dev/root' but the skeleton file contains a tab. Use a more
flexible '[[:blank:]]', instead.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rcw: allow not having custom rcwi files

A project could quite possibly have a custom rcw file
that does not rely on any custom rcw include files (rcwi).

Allow the build to succeed if this is the case.

Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
[yann.morin.1998@free.fr: install includes in a separate hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qt5/qt5webengine: fix translations target install path

Through the evolution of the qt5webengine package patch ([1], [2])
until the initial commit ([3]) the translations target install
path got mangled resulting in a double trailing qtwebengine_locales
path:
  /usr/translations/qtwebengine_locales/qtwebengine_locales
Instead of:
  /usr/translations/qtwebengine_locales

Fixes the translations runtime access failure resulting in the
following warning:

  WARNING:resource_bundle_qt.cpp(116): locale_file_path.empty() for locale

[1] http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2] https://patchwork.ozlabs.org/patch/640633
[3] https://git.buildroot.net/buildroot/commit/?id=89080bac9bc47946a09c1e74f2f872363bf6785b

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libinput: bump version to 1.15.2

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2020-February/041227.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openvmtools: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/e0e7ed448df8bdd6cb13a0989d7a6c7dbaa5bc4e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/smartmontools: fix build without stack-protector"

This reverts commit dc171f123c6b320c4930ba00debeb34fede82d99, which was
aimed at the next branch, not master.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/smartmontools: fix build without stack-protector

Fixes:
 - http://autobuild.buildroot.org/results/0de9f2a69fa2a39164211299f8a429d2fec6935a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/busybox: fix individual binaries installation

Call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in BUSYBOX_INSTALL_TARGET_CMDS,
not in BUSYBOX_INSTALL_INIT_SYSV. This should have been done in commit
b1e07d6d796e67a980d4a05d04c64f00162245ff but was somehow lost during the
review/aply process.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: add libftdi1 test case

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libftdi1: fix unresolved symbol issue

GCC later than 5.x produce _fdti1.so file with an undefined
symbol str2charp_size due to C99 inline semantics change. So
remove this keyword.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: add upstream status]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/at: fix parallel build failure

Add a patch to finally fix parallel build failure. Patch is pending
upstream:
https://salsa.debian.org/debian/at/merge_requests/14

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/tpm2-tss: bump to version 2.3.3

Bugfix release, fixing a number of issues:

- Fixed mixing salted and unsalted sessions in the same ESAPI context
- Removed use of VLAs from TPML marshal code
- Added check for object node before calling compute_session_value function
- Fixed auth calculation in Esys_StartAuthSession called with optional parameters
- Fixed compute_encrypted_salt error handling in Esys_StartAuthSession
- Fixed exported symbols map for libtss2-mu

The 2.3.3 tarball accidently contains a Makefile-fuzz-generated.am with
content from a fuzz testing run (rather than an empty file as in earlier
releases), confusing autoreconf together with our
0001-configure-Only-use-CXX-when-fuzzing.patch.

Work around that by adding a post-patch hook to truncate the file.  The
issue has been reported upstream and the release logic has been changed to
ensure this does not happen again for future releases:

https://github.com/tstruk/tpm2-tss/commit/d163041e3bafa23c0be89c82a99b8501634ebdb4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/manual: clarify the <PKG>_PATCH_DEPENDENCIES guarantee

Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.

Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mbedtls: security bump to version 2.16.5

- Fix potential memory overread when performing an ECDSA signature
   operation. The overread only happens with cryptographically low
   probability (of the order of 2^-n where n is the bitsize of the
   curve) unless the RNG is broken, and could result in information
   disclosure or denial of service (application crash or extra resource
   consumption).
 - To avoid a side channel vulnerability when parsing an RSA private
   key, read all the CRT parameters from the DER structure rather than
   reconstructing them.
 - Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/luv: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/83b34e606b128546da8a70836d039090e334a1ec

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: mark patch accepted upstream]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libsvgtiny: fix parallel build

Fix previous commit[1] which purpose was to fix parallel build. It
didn't work since it assigned $(MAKE1) to LIBSVGTINY_MAKE, but this is a
generic-package and building is done using $(MAKE), then LIBSVGTINY_MAKE
was ignored. Let's substitute instead $(MAKE) with $(MAKE1) in
LIBSVGTINY_BUILD_CMDS.

[1]:
https://git.buildroot.net/buildroot/commit/?id=26d67a2599d6c88facd5178de853fa355244e7c2

Fixes:
http://autobuild.buildroot.net/results/67d/67d341c0cc272323d6e231a20796a6848c21d760/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
  - use $(MAKE1) in all three step
  - move comment out of the define
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

infra: don't be verbose when calling the instrumentation steps

Commit 509db3b88a added calls to (parts of) the instrumentation steps.
However, those calls are echoed, unlike the other places where we call
them (in the package infra).

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>

package/mesa3d: gbm needs a DRI driver or a Gallium driver w/ EGL

src/gbm/cd6bfad@@gbm at sha/main_backend.c.o: In function `_gbm_create_device':
backend.c:(.text+0x38): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x40): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x74): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x78): undefined reference to `gbm_dri_backend'
collect2: error: ld returned 1 exit status

This issue has been trigged since [1]:
"package/mesa3d: add option to configure gbm support"

Before the patch, the gbm support was autodetected by meson and enabled
only when at least one dri driver was enabled [2].

On the Buildroot side, the gbm support was explicitely enabled only when
BR2_PACKAGE_MESA3D_OPENGL_EGL was set.

We have two cases:
- At least one DRI driver.
- No DRI driver but one Gallium w/ EGL enable (EGL selected or not by the
  Gallium driver). In this case the meson build system set with_dri to true
  (even if no DRI driver is enabled) to use the builtin:egl_dri2 [3].

The gbm's meson build system seems to handle the case where no dri driver is
enabled [4] but it still use main/backend.c source file [6] that use
gbm_dri_backend [7]. So with_dri2 must always be set.

Probably a missing check in meson.build:

 if with_gbm and not with_dri
   error('GBM backend needs a dri driver or a gallium driver w/ EGL support.')
 endif

Add a dependency on GBM option:

 depends on BR2_PACKAGE_MESA3D_DRI_DRIVER \
         || (BR2_PACKAGE_MESA3D_GALLIUM_DRIVER && BR2_PACKAGE_MESA3D_OPENGL_EGL)

Fixes:
http://autobuild.buildroot.net/results/b9b6281983388dc22d929887d653da3db60f1f2c

[1] b6c051acf787c804e732bc58ba8d7e440701a168
[2] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L348
[3] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L212
[4] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/meson.build#L37
[5] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/meson.build#L24
[6] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/main/backend.c#L38
[7] http://lists.busybox.net/pipermail/buildroot/2020-February/274425.html

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: fix dependency of comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bash: fix build on uclibc

Fixes:
 - http://autobuild.buildroot.org/results/2ae2eca969e6d1febcacb8b0423ced3aad7505a2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bash: add upstream patches

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mesa3d: select gbm if no glx, no egl and no osmesa-classic

This issue has been trigged since [1]:
"package/mesa3d: add option to configure gbm support"

Before the patch, the gbm support was autodetected by meson and enabled
only when at least one dri driver was enabled [2].

On the Buildroot side, the gbm support was explicitely enabled only when
BR2_PACKAGE_MESA3D_OPENGL_EGL was set.

Now, the gbm support is explicitely disabled but the meson build system
check if at least one option OpenGL GLX or OpenGL EGL or GBM or
OSMesa (classic) library is enabled [3].

The previous behavious was to enable GBM when GLX, EGL and OSMesa are
disabled. So select GBM symbol for this case.

Fixes:
http://autobuild.buildroot.net/results/a14f329560f8022f7ba8ec43ad8eed84e005d226

[1] b6c051acf787c804e732bc58ba8d7e440701a168
[2] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L348
[3] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L449

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/jpeg-turbo: force fPIC for shared libraries

When BR2_SSP_ALL is set, there is a link issue due to missing -fPIC in CFLAGS.
Set CMAKE_POSITION_INDEPENDENT_CODE=ON to add it.

This is a similar fix as for gtest package [1]

[1] https://git.buildroot.net/buildroot/commit/?id=2026621f3c60167aa8ba48e658be1b214d1347d7

Fixes:
http://autobuild.buildroot.net/results/e1f/e1f164cee16b037c0232fdda40fc16caf8f0c0af

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Murat Demirten <mdemirten@yh.com.tr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Gilles Talis for libosip2 and libeXosip2

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/radvd: disable by default in systemd preset-all

We don't provide a configuration file, so disable radvd by default.

Update the help message with instructions on how to enable radvd at
build time with systemd.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: security bump version to 7.4.3

Changelog: https://www.php.net/ChangeLog-7.php#7.4.3

Fixes CVE-2020-7061, CVE-2020-7062 & CVE-2020-7063.

Removed patch applied upstream:
https://github.com/php/php-src/commit/f0f5c415a6e0abc40514f97113deb52a343174ee

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/external: fix SSP help texts for custom toolchains

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Config.in: ensure BR2_SSP_STRONG can only be selected if supported

This commit ensures that BR2_SSP_STRONG cannot be chosen if the
toolchain doesn't support strong SSP.

Fixes:

  http://autobuild.buildroot.net/results/cba93a681d10692c4e4c5584e4c962bd18a608d4/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

toolchain/toolchain-external/toolchain-external-custom: add option to indicate SSP_STRONG support

This commit adds a user-visible option
BR2_TOOLCHAIN_EXTERNAL_HAS_SSP_STRONG, which will allow the user to
indicate if the custom external toolchain does or does not have
SSP_STRONG support. Depending on this, the user will be able to use
(or not) the BR2_SSP_STRONG option.

Checking if what the user said is true or not about this is already
done in toolchain/toolchain-external/pkg-toolchain-external.mk:

        $$(Q)$$(call check_toolchain_ssp,$$(TOOLCHAIN_EXTERNAL_CC),$(BR2_SSP_OPTION))

If the user selects BR2_SSP_STRONG, this will check if
-fstack-protector-strong is really supported.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

toolchain: add hidden BR2_TOOLCHAIN_HAS_SSP_STRONG boolean

This will allow toolchain to indicate if they support
-fstack-protector-strong or not.

Whenever the gcc version is >= 4.9, we always have SSP_STRONG support
if we have SSP support. However, some toolchains older than gcc 4.9
might have backported SSP_STRONG support, which is why we cannot rely
just on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9.

Having this "default" value allows to avoid adding a "select
BR2_TOOLCHAIN_HAS_SSP_STRONG" in the internal toolchain logic plus in
almost external toolchains. But it allows custom external toolchains
that are pre-4.9 to potentially declare that they support strong SSP.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sdbusplus: fix indentation

Fix a check-package error introduce by 6bf74ce3db (package/sdbusplus:
create m4 directory before autoreconf):

    package/sdbusplus/sdbusplus.mk:29: expected indent with tabs

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: John Faith <jfaith@impinj.com>
Cc: Michael Walle <michael@walle.cc>

docs/website: add commercial support section

Add a section to the support page for commercial support.

Add Mind, Bootlin and Smile in that section.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/pkg-stats: iterate over CVEs in streaming

The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).

However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.

To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ipsec-tools: annotate _IGNORE_CVES for the included security patches

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vorbis-tools: annotate _IGNORE_CVES for the included security patches

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libtomcrypt: annotate _IGNORE_CVES for the included security patches

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libsndfile: annotate _IGNORE_CVES for the included security patches

Also mark CVE-2018-13419 as disputed.

[Peter: add dispute link as suggested by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/audiofile: annotate _IGNORE_CVES for the included security patches

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sdbusplus: create m4 directory before autoreconf

Commit d255b67972b4b7f27572581fe0c8c8aa03d850c8 fixed the handling of
the a package local m4/ directory which might be missing. But this
only works if it is the very first argument. But for this package this
is not possible because we already occupy this with the extra include
directory for autoconf-archive. Bring back the hook to create the m4/
directory to fix this.

Fixes:

  http://autobuild.buildroot.net/results/dc907421a343b8523b14fc9a846e0caf7abe630c/

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang: patch the tarball

Remove the lib/ssl/src/deps directory before configuring the package.
Otherwise, during the compilation of the ssl app, it may fails by
looking for logger.hrl in the wrong location (bootstrap/lib/kernel
instead of lib/kernel).

Fixes:

  http://autobuild.buildroot.net/results/97606fcd11eaf0822b58a9532c5325601d43eaac/

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Tested-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qwt: add missing qt5svg dependency

Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Makefile: don't recreate staging symlink if it exists

Create the staging symlink the same way as the host symlink. This means
using a make dependency rather than recreating it every time.

In coreutils versions below 8.27, re-creation of symbolic links was not
atomic. This means that there is a period in time where the existing link is
removed, before the new one is created. In coreutils 8.27 this was fixed,
see [1]. Note that CentOS 7 ships with coreutils 8.22.

In the following scenario, this is a problem:

- an application is compiled using the sysroot prepared by Buildroot and
  links against Xenomai userspace libraries, but its build process is steered
  from outside of Buildroot
- to know the correct flags, the application makefile uses the 'xeno-config'
  file to request them, and passes DESTDIR=/buildroot/output/staging
- the xeno-config responds with flags based on the path
  '/buildroot/output/staging/...'
- while the application build is ongoing, a 'make' happens in Buildroot,
  causing the 'staging' symlink to be recreated (even though it already
  existed)
- when exactly at this time, the application calls the compiler with -I
  flags pointing to output/staging, the build fails with:

  -I/buildroot/output/staging/usr/include/xenomai/mercury: Error:  ^ is not a directory
  -I/buildroot/output/staging/usr/include/xenomai: Error:  ^ is not a directory
  -I/buildroot/output/staging/usr/include/xenomai/xenomai: Error:  ^ is not a directory
  -I/buildroot/output/staging/usr/include/xenomai/psos: Error:  ^ is not a directory
  Failed: ** ^ *

Work around this problem by only creating the staging symlink once, similar
to how the host symlink (if any) is created.

See also commit d0f4f95e390bcb1c953efa125f5277a8a235396e which changed the
way these symlinks are made. The reasoning in this commit is to move away
from the 'dirs' target.

[1] https://github.com/coreutils/coreutils/commit/376967889ed7ed561e46ff6d88a66779db62737a

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Makefile: use HOST_DIR_SYMLINK instead of hardcoding

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libxml2: properly set LIBXML2_IGNORE_CVES

The libxml2 package has two patches that fix the two CVEs affecting
libxml2 in version 2.9.10, so let's use LIBXML2_IGNORE_CVES to ensure
these CVEs are no longer reported by pkg-stats.

Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/pkg-stats: properly ignore CVEs in <pkg>_IGNORE_CVES

It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.

Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class

Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libupnpp: remove unneeded static workaround

libupnpp uses pkg-config since version 0.15.1 and
https://opensourceprojects.eu/p/libupnpp/code/ci/3dc44417e868b9b4417cbc15f8173e0a2e142b17
so remove unneeded static workaround

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Update for 2020.02-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libsigrok: explain why host-doxygen is needed

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/owfs: fixup Python sysconfigdata for per-package directories

This is needed so that building the owfs Python module uses the gcc
from owfs per-package directory, and not the one from the python
per-package directory.

Fixes:

  http://autobuild.buildroot.net/results/0d582dda367507991a4c38141db36b0fa8e47e67/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-python: fix for per-package directories

With per-package directory support, Python external modules are
causing a problem: the _sysconfigdata.py module installed by the
Python interpreter contains a number of paths that are relative to the
current package per-package directory, i.e python or python3. For
example:

'BLDSHARED': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-gcc -shared',
'CC': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-gcc',
'CXX': '/home/thomas/projets/buildroot/output/per-package/python/host/bin/arm-linux-g++',
etc.

These paths are problematic, because it means that the wrong compiler
gets used when building external Python modules: instead of using the
compiler from the external Python module per-package host directory,
it uses the one from the 'python' or 'python3' per-package host
directory. Due to this, any native dependency needed by the external
Python module is not found, even though it is properly present in the
current package per-package directory.

Of course, the problem occurs with both target Python modules and host
Python modules.

To fix this, we simply rewrite those paths in _sysconfigdata.py before
building a Python package.

Interestingly, until now, the _sysconfidata.py that was used during
the build was the one from $(TARGET_DIR), which is a bit unusual: it
is more common to use files from $(STAGING_DIR) during the build
process. So this commit changes the PYTHON_PATH and PYTHON3_PATH
variables so that they point to $(STAGING_DIR), which makes the
_sysconfigdata.py fixup in $(STAGING_DIR) effective.

Fixes:

  http://autobuild.buildroot.net/results/a24b0555fd4261b50dc3986635c30717d9cbe764/ (python-psycopg2)
  http://autobuild.buildroot.net/results/080fa893e1b0e7a8c8a31ac1c98eb8871b97264d/ (python-alsaaudio)
  http://autobuild.buildroot.net/results/79bc070f98d6d9d8ef78df12b248cdc7d0e405c3/ (python-lxml)
  and many more Python packages that use native code with a native library

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/apache: fix build with per-package directory support

When APR_INCLUDEDIR and APU_INCLUDEDIR point to the same directory,
Apache builds properly. However, with per-package directory support,
they point to different directories, and APU_INCLUDEDIR contains both
the APR headers and the APU headers.

Due to this, the Apache Makefile logic to generate its exports.c file
leads to duplicate definitions, because the APR headers are considered
twice: once from APR_INCLUDEDIR, once from APU_INCLUDEDIR.

We fix this by introducing a patch to the Apache build system.

In addition, apr provides a special libtool script that gets used by
apr-util and apache. apr-util already had a fixup for this, but apache
did not, which was causing the gcc from apr-util per-package
directories be used during the apache build, causing build failures.

To fix this, we adjust this libtool script to point to the correct
tools in apache's per-package directories.

There are no autobuilder failures for this, because Apache needs
apr-util, and apr-util currently fails to build when
BR2_PER_PACKAGE_DIRECTORIES=y.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/apr-util: fix build with per-package directories

With per-package directories support enabled, the build of apr-util
fails, for two reasons:

 - The rules.mk file is generated by the 'apr' package, and then
   copied into the 'apr-util' source directory. This is done by the
   'apr-util' build process. Unfortunately, this rules.mk file has a
   number of hardcoded paths: to the compiler and to the libtool
   script.

   Due to this, the compiler from the 'apr' per-package directory gets
   used. But this compiler uses the 'apr' package sysroot, which does
   not have all the dependencies of the 'apr-util' package, causing
   the build to fail because <expat.h> is not found.

 - Similarly, the libtool script itself has some hardcoded paths,
   which make it use the compiler/linker from the 'apr' per-package
   directory, so it does not find the expat library.

We fix both issues by doing the necessary replacement in both rules.mk
and libtool.

Fixes:

  http://autobuild.buildroot.net/results/2a67b5d58f79348e20a972125e4797eff5585716/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cog: add patch fixing cog segfault

Fixes:
Thread 1 "cog" received signal SIGSEGV, Segmentation fault.
xkb_state_update_mask (state=0x0, base_mods=0, latched_mods=0, locked_mods=0, base_group=base_group@entry=0, latched_group=latched_group@entry=0, locked_group=0) at ../src/state.c:814
814     prev_components = state->components;

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libxml2: add upstream security fix for CVE-2019-20388

Fixes CVE-2019-20388: xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10
allows an xmlSchemaValidateStream memory leak.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pulseview: depends on host gcc >= 4.9

Commit 88bb278d5ac790bee0c3a438464da82ee7625cff forgot to propagate the
new host gcc >= 4.9 dependency from BR2_PACKAGE_LIBSIGROKCXX

Fixes:
 - http://autobuild.buildroot.org/results/5dc9dc95d0534b35e2443c120162b5176edafe0b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nodejs: security bump to version 12.16.0

Fixes the following security issues (12.15.0):

- CVE-2019-15606: HTTP header values do not have trailing OWS trimmed

- CVE-2019-15605: HTTP request smuggling using malformed Transfer-Encoding
  header

- CVE-2019-15604: Remotely trigger an assertion on a TLS server with a
  malformed certificate string

For more details, see the advisory:
https://nodejs.org/en/blog/vulnerability/february-2020-security-releases/

On top of this, 12.16.0 brings a number of changes and bugfixes.

Update the license hash for an addition of the (MIT) licensing terms for the
uvwsai module:

+
+- uvwasi, located at deps/uvwasi, is licensed as follows:
+  """
+    MIT License
+
+    Copyright (c) 2019 Colin Ihrig and Contributors
+
+    Permission is hereby granted, free of charge, to any person obtaining a copy
+    of this software and associated documentation files (the "Software"), to deal
+    in the Software without restriction, including without limitation the rights
+    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+    copies of the Software, and to permit persons to whom the Software is
+    furnished to do so, subject to the following conditions:
+
+    The above copyright notice and this permission notice shall be included in all
+    copies or substantial portions of the Software.
+
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+    SOFTWARE.
+  """

While we are at it, adjust the white space in the .hash function to match
the new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qpdf: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/ad7fb68ae87850a85509eed80fd0cae8721b10c5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gutenprint: add back the hook for creating the m4local directory

Commit 64c42c5e2c26261e26c3548c86b02f55d12f341b removed the hook for
creating the m4local directory with the assumption that it would be
created because the first include is treated in a special way if it
doesn't exists

However, this assumption was wrong as m4local is the second include, the
first one is m4 (which already exists in the archive). So put back the
hook. The other solutions would be to patch:
 - Makefile.{am,in} to remove m4local
 - configure.ac and Makefile.{am,in} to add m4local before m4
However, both solutions don't seem to be upstreamable

Fixes:
 - http://autobuild.buildroot.org/results/e40313c6ec193d6156e26eff62303545fba09413

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

core: fix packages-file-list.txt after an incremental build

The package instrumentation step 'step_pkg_size' is populating the files:
    output/build/packages-file-list.txt
    output/build/packages-file-list-staging.txt
    output/build/packages-file-list-host.txt
by comparing the list of files before and after installation of a package,
with some clever tricks to detect changes to existing files etc.

As an optimization, instead of gathering this list before and after each
package, where the 'after-state' of one package is the same as the
'before-state' of the next package, only the 'after-state' is used and
is shared between packages.

This works fine, except at the end of the build, as explained next.

In the target-finalize step, many files will be touched. For example, files
like /etc/hosts, /etc/os-release, but also all object files that are
stripped, and all files touched by post-build scripts or created by rootfs
overlays. This means that the 'after-state' of the last package does not
reflect the actual situation after target-finalize is run.

For a single complete build this poses no problem. But, if one incrementally
rebuilds a package after the initial build, e.g. with 'make foo-rebuild',
then all changes that happened in target-finalize at the end of the initial
build (the 'after-state' of the last package built) will be detected as
changes caused by the rebuild of package foo. As a result, all these files
will incorrectly be treated as 'owned' by package foo.

Correct this situation by capturing a new state at the end of
target-finalize, so that the 'before-state' of an incremental build will be
correct.

Note: the reasoning above talks about packages-file-list.txt and
target-finalize, but also applies to
packages-file-list-staging.txt/staging-finalize and
packages-file-list-host.txt/host-finalize.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/run-tests: reorder imports

Reorder imports using the isort utility to fix a warning from pylint3:

wrong-import-order: standard import "import multiprocessing" should be
placed before "import nose2"

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package.nfs-utils: drop extra empty line

Commit 12c0f68caf (package/nfs-utils: bump version to 2.4.3) added an
extra empty line, causing check-package to whine:

    package/nfs-utils/nfs-utils.mk:27: consecutive empty lines

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/qemu{x86, x86_64}: add a serial console

The current Buildroot defconfigs for qemu_x86 and qemu_x86_64
instantiate a console on tty1, which appears on QEMU's
graphical window. Add a console on the serial port (ttyS0) to
be used later for gitlab testing.

This change is need since the script used for gitlab testing
needs to use a serial output with pexpect.

This change is similar to the one made for raspberrypi [1] to
handle HDMI and serial console:

This requires three changes:
 1. have two 'console=' entries in the kernel command line: tty1,
    then ttyS0;
 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
    a getty on the last console= passed to the kernel, ttyS0;
 3. add a new getty on tty1 to the generated inittab.

Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.

Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.

Note: instead of simply adding a new getty on ttyS0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate a console on QEMU graphical window, then
instantiate a really-serial console on another line.

The result is these two inittab lines:

  console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
  tty1::respawn:/sbin/getty -L  tty1 0 vt100 # QEMU graphical window

[1] 20878a1017e2bf7eb8c5f870dc6d2641493cb0f9

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_pcc_mac99: build host-qemu for runtime testing

The commit [1] added host-qemu package for each qemu defconfig
for gitlab runtime testing.

[1] 29e1cb88844614c40846540e22cf83aa9e52674f

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_ppc_mac99_defconfig: add usual comments for Kconfig symbols

This defconfig was generated by savedefconfig but we usually
use a manually modified defconfig to add some comments for
Kconfig symbols.

No content change intended.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/janus-gateway: bump version to 0.8.1

Other changes:
  - Update License hash which properly adds the OpenSSL exception.

Tested with Debian 8:

br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]:   OK
 br-arm-cortex-m4-full [3/6]:   SKIPPED
        br-x86-64-musl [4/6]:   OK
    br-arm-full-static [5/6]:   SKIPPED
          sourcery-arm [6/6]:   OK

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qemu: Bump to version 4.2.0

Other changes:
  - Remove upstream patches
  - Update COPYING.LIB hash as upstream updated the file to match the new LGPL
    2.1 license from upstream. See:
    https://github.com/qemu/qemu/commit/f0d44cc4462f112bce5ec556e87eff4eec682e39

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[Peter: change libssh2 to libssh as pointed out by Vincent Fazio]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nfs-utils: bump version to 2.4.3

Bump to version 2.4.3 of nfs-utils.  All patches have been upstreamed, so
drop them all.  It now needs rpcgen built by host-nfs-utils, to do this
let's pass its path to --with-rpcgen= instead of 'internal'.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Peter: drop AUTORECONF, explicitly depend on host-nfs-utils]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minicom: bump version

For a minor fix.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glslsandbox-player: remove 'v' prefix

Fixes version parsing for release-monitoring.org support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/run-tests: check for empty sequences in a pythonic way

According to PEP8 empty sequences should be checked as booleans.

Fixes the following PEP8 warning:
Do not use `len(SEQUENCE)` to determine if a sequence is empty

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.4.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: use correct conditional for wireguard kernel config fixup

Commit de591c5c3a93 (package/wireguard-linux-compat: new package) split up
the wireguard package in wireguard-tools and wireguard-linux-compat, but
forgot to update the conditional in linux.mk, so the kernel config fixups
needed for wireguard are no longer applied.

Update the conditional to use the BR2_PACKAGE_WIREGUARD_LINUX_COMPAT symbol
instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wireguard-linux-compat: bump version to 0.0.20200215

Fixes a regression introduced in 0.0.20200214.  For details, see the
announcement:
https://lists.zx2c4.com/pipermail/wireguard/2020-February/005014.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgpg-error: bump to version 1.37

- Remove patch (already in version)
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-cython: bump to version 0.29.15

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-simplejson: bump to version 3.17.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pyyaml: bump to version 5.3

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pyopenssl: bump to version 19.1.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gensio: bump to version 1.5.1

- Update indentation of hash file (2 spaces)
- This will fix a build failure without threads thanks to
  https://github.com/cminyard/gensio/commit/8918de5b30f90b826c48064e9ee92304b63ffe85
  and associated upstream patch

Fixes:
 - http://autobuild.buildroot.org/results/e94d0e0b46afc1223a74bcc471909f4adef0d6f3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libtorrent-rasterbar: bump to version 1.2.4

Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-six: bump to version 1.14.0

License hash change is due to date update.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-cryptography: bump to version 2.8

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wpewebkit: security bump to version 2.26.4

Fixes the following security issues:

- CVE-2020-3862: Impact: A malicious website may be able to cause a denial
  of service.  Description: A denial of service issue was addressed with
  improved memory handling.

- CVE-2020-3864: Impact: A DOM object context may not have had a unique
  security origin.  Description: A logic issue was addressed with improved
  validation.

- CVE-2020-3865: Impact: A top-level DOM object context may have incorrectly
  been considered secure.  Description: A logic issue was addressed with
  improved validation.

- CVE-2020-3867: Impact: Processing maliciously crafted web content may lead
  to universal cross site scripting.  Description: A logic issue was
  addressed with improved state management.

- CVE-2020-3868: Impact: Processing maliciously crafted web content may lead
  to arbitrary code execution.  Description: Multiple memory corruption
  issues were addressed with improved memory handling.

For more details, see the advisory:
https://wpewebkit.org/security/WSA-2020-0002.html

While we are at it, adjust the white space in the .hash function to match
the new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>