xapp_xclock: bump to 1.0.6

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

feh: bump to 2.6.3

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

e2fsprogs: bump to version 1.42.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pkg-infra: correct the source name for host-only packages

Host-only package that don't define their <PKG>_SOURCE variable would
default to host-<pkg>-<version>.tar.gz.  It's more logical to remove
the host- prefix in this case.

This problem is most apparent with host-only packages downloaded from
version control, because they never define <PKG>_SOURCE.

Reported by Thomas Petazzoni and initial analysis by Luca Ceresoli.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: add gnupg

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: decode-tm6000 requires libv4l2util

The decode-tm6000 utility cannot build without the libv4l2util. If
this library is not available, the build breaks with:

decode_tm6000.o: In function `read_stream':
decode_tm6000.c:(.text+0x220): undefined reference to `v4l2_rcvbuf'
decode_tm6000.o: In function `main':
decode_tm6000.c:(.text+0x37c): undefined reference to `v4l2_open'
decode_tm6000.c:(.text+0x3cc): undefined reference to `v4l2_gettryset_fmt_cap'
decode_tm6000.c:(.text+0x424): undefined reference to `v4l2_getset_freq'
decode_tm6000.c:(.text+0x47c): undefined reference to `v4l2_mmap_bufs'
decode_tm6000.c:(.text+0x4a0): undefined reference to `v4l2_start_streaming'

See

 http://autobuild.buildroot.org/results/207ed74d5e816309ef0dc82ecc8112b51788fdf6/build-end.log

We fix this by adding util/libv4l2util to the list of directories to
build when decode-tm6000 is enabled. The only other user of
libv4l2util is another utility called qv4l2, for which Buildroot has
no Config.in option, so we only handle the case of decode-tm6000 at
the moment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: properly error out when one of the make step fails

In libv4l.mk, if there are multiple elements in $(LIBV4L_DIRS_y), they
are built in order, one after the other. However, our loop construct
doesn't take into account the fact that we should error out if one of
the steps failed.

A good illustration is having BR2_PACKAGE_LIBV4L_DECODE_TM6000 and
BR2_PACKAGE_LIBV4L_V4L2_CTL enabled. The build of decode-tm6000 will
fail, but the build will happily continue without stopping in libv4l.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl_gfx: don't use --enable-mmx on x86_64

Even though the MMX instructions are available on x86_64 processors,
the MMX code in sdl_gfx is written in IA32-specific assembly code, and
therefore does not build on x86_64. It generates the following build
issues:

SDL_imageFilter.c: Assembler messages:
SDL_imageFilter.c:34: Error: `pusha' is not supported in 64-bit mode
SDL_imageFilter.c:38: Error: `popa' is not supported in 64-bit mode
SDL_imageFilter.c:77: Error: `pusha' is not supported in 64-bit mode
SDL_imageFilter.c:93: Error: `popa' is not supported in 64-bit mode
[...]

We fix this by only enabling MMX support in this package when the
processor supports MMX *and* it is a IA32 compatible processor.

Fixes

  http://autobuild.buildroot.org/results/b9efc611f5da487079b6be37bb7a41a3198d63b9/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cairo: disable trace and trace interpreter

The Cairo tracing and trace interpreter are most likely not that
useful, so disable them. They also require zlib, which isn't a
dependency of Cairo at the moment. This fixes the following build
failure:

  http://autobuild.buildroot.org/results/a91e4e337fd9deb0f9fad433350feb27b2aee556/build-end.log

In the future, if people are interested by the trace and trace
interpreter, we can add a new Config.in knob for them.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

poco: bump to version 1.4.4

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mesa3d: add dependency on host-xutil_makedepend

The mesa3d now requires the makedepend host utility, otherwise, it
fails with:

configure: error: makedepend is required to build Mesa

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Noel Vellemans <Noel.Vellemans@visionBMS.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdb: target gdb not available on microblaze

Fixes

  http://autobuild.buildroot.org/results/5950c95ca12721dd910ad72fe52bfa9ac45a5120/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xenomai: bump to 2.6.1

The largefile patch is no longer necessary, it has been merged
upstream. However, in order to make the build work properly with
Thumb2 toolchains (such as Linaro toolchains), an additional fix is
needed. This fix is already upstream and will be part of upcoming
Xenomai releases.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

unionfs: add patch to disable search for the C++ compiler

Fixes

  http://autobuild.buildroot.org/results/9c4a9897dda1b99cc7a57af605301b53ed32b95d/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 5, 6}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package infra: remove empty TARGET_CPPFLAGS def

It's unneeded, just fills the next match (LARGEFILE) with a leading
space. Fixes
http://autobuild.buildroot.net/results/ad5772d19036a0c5564228ac7aba953d35a3cf85/build-end.log
since SCons can't handle leading whitespace in LDFLAGS gracefully.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

unionfs: convert to cmake-package

Fixes e.g. http://autobuild.buildroot.net/results/c279007dd8b89a1c6fc9b58d3c2cda01ab84279e

The addition of CPPFLAGS overrides the defines added in unionfs's
Makefile.  Since unionfs now has CMake support, use that instead.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Disable database support in linux-pam

Due to the conflicts with default Berkeley DB configuration, disable
database support in linux-pam: pam_userdb is not built.

Signed-off-by: Dmitry <golubovsky@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ccid: Version bump to 1.4.8

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bind: security bump to version 9.6-ESV-R8

Fixes CVE-2012-5166, CVE-2012-4244, CVE-2012-3817 and CVE-2012-1667.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

scons: fix library installation directory

On gentoo systems SCons setup.py tries to install into
$(HOST_DIR)/usr/lib64 but SCons looks up for its stuff in
$(HOST_DIR)/usr/lib instead hence breaking.
Make it install into $(HOST_DIR)/usr/lib by force to avoid the issue, it
shouldn't matter on other distributions.
Version bumping doesn't fix it.

[Peter: wrapped long line]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/kernel-headers: drop unused cris architecture kludge

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

googlefontdirectory: new package

Note that the Google code project does not provide an archive containing
just the font files. This package uses the third party archive provided at

  http://joemaller.com/1856/download-google-fonts/

Further information is available at the following URL.

  http://code.google.com/p/googlefontdirectory/issues/detail?id=2

[Peter: drop version, fix install and simplify uninstall]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mtd: fixup after CPPFLAGS addition

Fixes http://autobuild.buildroot.net/results/c55e4c9741109c66f8f66ab7e3f4f1664826056a

mtd appends to CFLAGS/CPPFLAGS, but doesn't use override - So we need
to pass flags in the environment and not on the make command line to
get the combination of our flags and mtd's.

At the same time cleanup the host build to use a similar form
(HOST_CONFIGURE_OPTS) as target build.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: ensure TARGET_CFLAGS are used

Now that the lfs handling issues have been worked around, we can
pass TARGET_CONFIGURE_OPTS on the make command line to ensure
TARGET_CFLAGS are used.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: fixup after CPPFLAGS addition

Fixes http://autobuild.buildroot.net/results/4602f7cf4407a2969a04267bbc5d276b076a7c91

The preload libraries needs to wrap both the lfs and !lfs variants, so
ensure the lfs versions are not transparently used (as they are when
_LARGEFILE_SOURCE / _FILE_OFFSET_BITS=64 are defined).

This used to work by accident before, as our custom CFLAGS (containing those
defines) wasn't used.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sudo: ensure proper CPPFLAGS are used for host/compat build

Fixes http://autobuild.buildroot.net/results/ea326401a6711aaac10696629655e6d5ac4e0a90

sudo internally uses CPPFLAGS, so host/compat build now breaks after
CPPFLAGS got added to HOST_CONFIGURE_OPTS.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/Makefile.in: whitespace fixup after CPPFLAGS addition

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile.in: add CPPFLAGS support

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.2.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: use http:// for alioth.debian.org URLs

Fixes http://autobuild.buildroot.net/results/183a1be6ab1137c90dca0201d4bc72c7c0e659a3

alioth.debian.org uses a SSL certificate signed by spi-inc.org, which isn't
a trusted CA on non-Debian systems, causing wget to refuse download.

Fix it by using http URLs instead.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fb-test-app: new package

Test suite for Linux framebuffer.

[Peter: add patch to build with our TARGET_CFLAGS]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

patch: bump to version 2.7.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ethtool: bump to version 3.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libcurl: bump to version 7.27.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: add 2012.10, remove 2012.06

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: fix license information

The barebox license should be "GPLv2 with exceptions", and not GPLv2.

Signed-off-by: Simon Dawson <simond@trainfx.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netkittelnet: fix build on toolchains without C++ support

The configure script checks for C++ support as telnet (but not telnetd)
contains C++ code. This used to work by accident if the host had g++,
as we didn't pass TARGET_CONFIGURE_OPTS to configure (which sets CXX to
/bin/false).

Fix it by removing the g++ check and rewriting the configure checks to
use the C compiler instead.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netkittelnet: convert to generic-package infrastructure

[Peter: add netkitbase dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netkitbase: convert to the generic-package infrastructure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vpnc: convert to generic-package infrastructure

[Peter: minor fixes]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ttcp: convert to generic-package infrastructure

[Peter: minor fixes]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sconeserver: new package

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ccid: new package

PC/SC driver for USB CCID smart card readers.

http://pcsclite.alioth.debian.org/ccid.html

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pcsc-lite: new package

Middleware to access a smart card using SCard API (PC/SC).

http://pcsclite.alioth.debian.org/

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: backport upstream patches

Backport some lcdproc patches from upstream, to fix the following issues.

  * Incorrect parsing of minus key in handler for client_add_key command
  * Segfault in handler for menu_add_item command

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: add support for menus

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openvpn: Fix paths to external utilities

This sets paths to ifconfig, route, netstat and ip
in the target root filesystem.

Otherwise the paths leak from the host and may not
match those on the target.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sylpheed: Bump version to 3.2

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sylpheed: Fix includedir

The sylpheed headers are installed to $(DESTDIR)$(includedir),
while DESTDIR is $(TARGET_DIR) and includedir is set to
$(STAGING_DIR)/usr/include in the SYLPHEED_CONF_OPT.
Thus, the full staging directory path is created in the
target root filesystem, which is wrong.

The includedir was set to staging include because sylpheed
incorrectly adds includedir to its include path, and does
not cross-compile with the default includedir set to
/usr/include.

This removes includedir setting and also removes it from
include paths in Makefiles to prevent using host headers
from /usr/include. The same approach is used in the OE.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sylpheed: fix upstream URL

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nitrogen6x_defconfig: Use tarball from github instead of cloning git

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add FAQ entry how to properly add package from github.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Download packages from github in tar.gz format instead git format.

Verified way how to get packages from github by version or sha1
(it's enough to use first 7 characters from SHA1):
1. by sha1
FOO_VERSION = 1234567
FOO_SITE = http://github.com/user/package/tarball/branch

2. by version
FOO_VERSION = v1.0
FOO_SITE = http://github.com/user/package/tarball/$(FOO_VERSION)

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 5, 6}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netatalk: bump version

Netatalk goes to version 3.0.
The startup script has changed too, there is now only one binary called
netatalk. No more afpd, cnid, ... at startup ! They are executed by netatalk.

All the config is done within /etc/afp.conf, look at :
http://netatalk.sourceforge.net/3.0/htmldocs/upgrade.html
for more info about the upgrade process.

[Peter: added --without-kerberos to disable kerberos detection]
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pulseaudio: fix X11 + !locale build issue

Fixes http://autobuild.buildroot.net/results/aa1072ee5115ce12f03d600b46ff980a9d20c45d/

Pulseaudio installs autostart .desktop files when X11 support is enabled,
but the files are not created from the corresponding .desktop.in files
when built with --disable-nls (which we add for !locale builds).

Reported upstream at: https://bugs.freedesktop.org/show_bug.cgi?id=54658

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

use portable printf instead of echo -e, needed for MacOS X buildhost

echo -e is not a portable way to do this, better use printf.
Works with MacOS X.

Signed-off-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: Only enable IPv6 if BR2_INET_IPV6 is set

This fixes false positive IPv6 detection.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: Amend libmad selection

Do not set both --enable-mad and --disable-mad.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: Fix external libdvdread and libdvdnav support

This sets paths to dvdread-config and dvdnav-config,
and configuration options to enable external libdvdread
and libdvdnav support.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libdvdnav: Fix dvdnav-config

This fixes path prefix in the staging dvdnav-config
and removes dvdnav-config from the target filesystem
if BR2_HAVE_DEVFILES is not set.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libdvdread: Fix dvdread-config

This fixes path prefix in the staging dvdread-config
and removes dvdread-config from the target filesystem
if BR2_HAVE_DEVFILES is not set.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

samba: bump to version 3.6.8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-good: Add upstream patch to fix building with Linux 3.6

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: Remove more pkgconfig files

The pkgconfig files are located in  /usr/lib/pkgconfig
and /usr/share/pkgconfig directories.
However, only /usr/lib/pkgconfig is removed when no
development files are needed in the target filesystem.

Remove pkgconfig directory from $(TARGET_DIR)/usr/share
as well if BR2_HAVE_DEVFILES is not set.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pkg-infra: make sure cross compiling is enabled when host == target

When compiling for the same architecture and libc as the host,
GNU_TARGET_NAME and GNU_HOST_NAME are equal.  configure scripts use
these to detect cross-compilation, and will decide that we're doing
native compilation.  This may trigger running of executables,
which fail because of missing libraries in the host environment.

To solve this, set the vendor part in GNU_TARGET_NAME to buildroot.

This problem exists for instance in xserver_xorg-server on x86_64.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

strace: Version bump to 4.7

This also fixes a compilation problem with kernel headers 3.5
http://autobuild.buildroot.net/results/bb66a3a06d26f558e1c4c0593bb68e7af1d82398/build-end.log

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxml2: add license info

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxslt: bump to version 1.1.27

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

external-toolchain: BR2_TOOLCHAIN_EXTERNAL_GLIBC includes eglibc

Yann E. MORIN says:

    "Although eglibc can be configured to include/exclude parts of the
    features, it seems to not be in wide use, if at all."

Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

connman: ensure connmanctl is only built if explicitly enabled

Fixes http://autobuild.buildroot.net/results/3d3a2eec6a2520f048e00eeb967e3a770ffbcdd3

connmanctl is now built by default unless explicitly disabled.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

wpa_supplicant: add openssl 1.0.1 patch

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hostapd: add openssl 1.0.1 patch

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iproute2: bump to version 3.6.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ipset: bump to version 6.14

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hdparm: bump to version 9.42

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 5}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fftw: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: add 3.6 kernel, remove 3.5 option

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: add 3.6 kernel

And deprecate 2.6.39.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

connman: bump to version 1.7

[Peter: command line client needs readline]
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sheevaplug_defconfig: use 3.5.4 kernel

Notice that you need u-boot >= 2012.04 to be able to boot kernel >= 3.2,
because older u-boots keep the l2 cache enabled, see u-boot commit
679530278 (arm, arm-kirkwood: disable l2c before linux boot) for details.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pulseaudio: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xapp_xsetroot: needs libXcursor

Fixes http://autobuild.buildroot.net/results/1fe8d3496ca1b591cbc470f55067b4acc3ed4d63

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11vnc: add optional dependencies

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11vnc: add libXtst as a dependency

x11vnc CAN be built without XTEST support, but it isn't very useful as
noted by the warning printed by configure when it isn't found:

*** A working build environment for the XTEST extension was not found ***
(libXtst).  An x11vnc built this way will be *ONLY BARELY USABLE*.
You will be able to move the mouse but not click or type.  There can
also be deadlocks if an application grabs the X server.

It is recommended that you install the necessary development packages
for XTEST (perhaps it is named something like libxtst-dev) and run
configure again.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

external-toolchain: add Sourcery CodeBench ARM 2012.03

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: add linaro 2012.0{7,8,9}

And remove the 2012.0{2,3,4} versions.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

configs/calao_*: defconfigs should not hardcode BR2_JLEVEL

BR2_JLEVEL is specific to the build machine, not the specific board you
are targetting.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

evtest: add as a seperate package

Evtest is nowadays maintained as a seperate package by Peter Hutterer.

The project doesn't release any tarballs, so use the one of Fedora instead
so we don't need to autoreconf:

http://comments.gmane.org/gmane.comp.freedesktop.xorg.announce/1671

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

input-tools: drop evtest from input-tools package

Evtest is nowadays maintained as a seperate package by Peter Hutterer.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: add 2012.08 / .09, drop .04 / .05

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11vnc: fix build without ipv6 support

Fixes http://autobuild.buildroot.net/results/1119dbf055edf281451a9e4216fdebc0b07fffae/

configure script uses --without-ipv6 instead of --disable-ipv6, and configure
option is only used for libraries, not the x11vnc application.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libSM: only build documentation if needed

Documentation generation is slow, so only create it if requested.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

genext2fs: needs largefile after version bump

Fixes http://autobuild.buildroot.net/results/8c7c10c0175a7ddf8e2d37a4718469d4ead3835a

And fixup space/tab mixup in Config.in while we're at it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: 1.1 version needs largefile support

Fixes http://autobuild.buildroot.net/results/7d084a1a8fd484f2c6df82ccd7b9d8aeebe68c2d

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libglib2: bump version

For details, see:

http://ftp.gnome.org/pub/gnome/sources/glib/2.30/glib-2.30.3.news

Notice: 2.30.3 is only available in .xz format.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11r7: xserver_xorg-server: Amend record proto selection

Record proto is not really required. It can be disabled.

Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>