x86: Add a "CondInst" format for conditionally decoded instructions.

A condition can be specified which will tell the decoder whether to return
the instruction being requested, or, if the condition fails, UD2.

Change-Id: I0f1c075deb10754ce1dd88be1726a196294e41fd
Reviewed-on: https://gem5-review.googlesource.com/4580
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev: Fix an IDE error check.

The error message says an IDE controller can support at most 4 disks, but the
check would fail if there were more than 3 disks.

Change-Id: Ic7d5d8c941fe2580da43019f53991377d4727bb9
Reviewed-on: https://gem5-review.googlesource.com/4460
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-cache: Delete squashed HWPrefetches

Request and Packet for squashed HWPrefetches were not deleted

Change-Id: I9b66bb01b8ed6a5ddfaaa8739a68165dc4a7006c
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4340
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

configs, arm: Fix incorrect use of mem_range in bL example

The change "config: Change mem_range attribute naming in ARM
SimpleSystem" modified the SimpleSystem class to be compatible with
the MemConfig utility script. While doing so, the way we report the
memory ranges supported by the system changed, which broke the bL
example configration. This changeset introduces the necessary changes
to make the script work again.

Change-Id: I789987950ff04b6c5ae1c8b807355bcba34f6b3c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm, config: Fix CPU names in ARM example configs

The ARM example configs used to rely on CPU aliases for the
AtomicSimpleCPU and KVM when configuring clusters. This broken when
support for CPU aliases was removed ('config: Remove support for CPU
aliases.'). This change updates the config scripts to use the full
class names instead.

Change-Id: If36c46207f39ca1897ecf77d9588f1c059819e63
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4360
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

base: Give more information when setting up asynchronous IO fails.

When asynchronous IO fails, gem5 currently just says it failed and quits, and
doesn't give any more information about which step failed, or what
specifically about it failed.

This change adds two helpers which will attempt the fcntl, check for error
conditions, and in the event of a failure, include a message describing the
error code and what the arguments to fcntl were.

Change-Id: I316478172ab2aefd3788279dbc12744791385cd5
Reviewed-on: https://gem5-review.googlesource.com/4320
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: git ignore file udpated

Change-Id: Ib2c7a7d26e7121dd082ca55a7c7ccf53fc47572c
Reviewed-on: https://gem5-review.googlesource.com/4240
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

style: Add shared gem5 headers to the style checker

Teach the style checker about common headers living in gem5/. These
should be included after any global library headers (e.g., C headers
or STL headers), but before the normal gem5 headers.

Change-Id: I322f841420e361c16314be8fa4cbd1e86d2bfa9f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4300
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util: Move m5op.h to the shared include directory

The header file with C declarations for m5ops is sometimes needed by
code outside of the util/m5 directory. Move this file to the shared
include directory and factor out flags to a generic asm header. Note
that applications that need to call m5ops still need to link with
libm5.a or implement their own trampolines.

Change-Id: I36a3f459ed71593e38b869dc2b1302c810f92276
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4265
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util, m5: Use consistent naming for m5op C symbols

Rename m5op C symbols to be prefixed all lower case, separated by
underscore, and prefixed by m5. This avoids potential name clashes for
short names such as arm.

Change-Id: Ic42f94d8a722661ef96c151d627e31eeb2e51490
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4264
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Use named constants for m5op instructions

Change-Id: I544519c4f87e50cc02af29cbb3edc31ecf726e8e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4263
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim: Use named constants for pseudo ops

Use named constants from a shared header instead of magic values when
handling pseudo ops.

Change-Id: If157060bbcd772ce7e8556482b44ca714f4319b1
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4262
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util: Move the m5ops.h file to a shared directory

The header file m5ops.h contains a list of constants that should be
shared between the simulator and utilities. Move this header file to a
new top-level directory for shared files and rename constants to make
them suitable for inclusion in the main simulator.

The structure of the shared include directory is as follows:

include/gem5: Files that can be included from C code.
include/gem5/asm: Files that can be included from assembly code.
  asm/generic/: Files that aren't guest ISA specific
  asm/${isa}/: Files that are guest ISA specific

Change-Id: I1aa511057bcaa80cc2d566109ff26581558c4a41
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4261
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm, arm: Switch to the device EQ when accessing ISA devices

ISA devices typically run in the device event queue. Previously, we
assumed that devices would perform their own EQ migrations as
needed. This isn't ideal since it means we have different conventions
for IO devices and ISA devices. Switch to doing migrations in the KVM
CPU instead to make the behavior consistent.

Change-Id: I33b74480fb2126b0786dbdbfdcfa86083384250c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4288
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm: Add a helper method to access device event queues

The VM's event queue is normally used for devices in multi-core KVM
mode. Add a helper method, BaseKvmCPU::deviceEventQueue(), to access
this queue. This makes the intention of code migrating to device event
queues clearer.

Change-Id: Ifb10f553a6d7445c8d562f658cf9d0b1f4c577ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4287
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu, kvm: Fix deadlock issue when resuming a drained system

The KVM CPU sometimes needs to access devices when drain() is
called. This typically happens on ARM when synchronizing devices that
use the system register interface. When called from drain(), the event
queue isn't locked since drain is called from the outside when the
simulator isn't servicing any events. In such cases, performing a
migration to the device's queue will unlock a mutex that isn't
locked. This typically results in a deadlock when resuming the system
since the lock will be in an undefined state.

Change-Id: Ibdcc2e034e916a929124f297e72aae306cf66728
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4286
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Switch to DTOnly as the default machine type

Old ARM systems used to pass the machine type in the ATAGS list passed
to the kernel. This has been largely deprecated by the introduction of
device trees. Switch to the DTOnly machine type by default in gem5
since all new platforms and kernel will require this behavior.

Change-Id: Icfd085e4862863b4ef495566bfddbd11591866c3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4260
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

config: Discover CPU timing models based on target ISA

The CpuConfig helper currently assumes that all timing models live in
the cores.arm package. This ignores the potential mismatch between the
target ISA and the ISA assumptions made by the timing models.

Instead of unconditionally listing all CPU models in cores.arm, list
timing models from cores.generic and cores.${TARGET_ISA}. This ensures
that the listed timing models support the ISA that gem5 is targeting.

Change-Id: If6235af2118889638f56ac4151003f38edfe9485
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3947
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: SE configuration for the ARM starter kit

Add a full system example configuration for the ARM Research Starter
Kit on System Modeling. More information can be found at:
http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: Ia32a28eb713ba7050d790327ba6dbb73ec33b53a
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
[ Minor cleanups and more documentation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4203
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: FS configuration for the ARM starter kit

Add a full system example configuration for the ARM Research Starter
Kit on System Modeling. More information can be found at:
http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: Ifa40419d21923a32bb383d58466e421fe4260ddd
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
[ Minor cleanups and more documentation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4202
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: Add a high-performance in order timing model

The High-Performance In-order (HPI) CPU timing model is tuned to be
representative of a modern in-order ARMv8-A implementation. The HPI
core and its supporting simulation scripts, namely starter_se.py and
starter_fs.py (under /configs/example/arm/) are part of the ARM
Research Starter Kit on System Modeling. More information can be found
at: http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: I124bd06ba42d20abff09d447542b031d17eabe22
Signed-off-by: Ashkan Tousi <ashkan.tousimojarad@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

config: Change mem_range attribute naming in ARM SimpleSystem

MemConfig.config() expects memory ranges to be defined in a particular
way. This patch changes the naming of the mem_range attribute in
SympleSystem to enable use of MemConfig for configuring the memory.

Change-Id: I4964c136e53a99c69ff5e086cacb929aa435168d
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4200
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Fix path for module imports in ARM system configs

Change-Id: I6fd660da3899de1f8c61bf012532ff0437467302
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4220
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

configs,sim-se: fix se.py multi-cpu multi-cmd issue

Assign different pids to the different commands specified with the "--cmd"
flag to configs/example/se.py

Without this change, the following command line triggers
a "fatal: _pid 100 is already used" error:

command=$PWD/tests/test-progs/hello/bin/arm/linux/hello
./build/ARM/gem5.opt configs/example/se.py -n 2 -c "$command;$command"

Change-Id: If6f726481eb196d4f42680b6aa46364fce4190ed
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4160
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

sim: Prevent segfault in the wakeCpu m5op if id is invalid

Change-Id: I86229cedb206e10326cdee3f09a5c871e49c8d48
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3965

cpu: Add missing rename of vector registers in the O3 CPU

The introduction of a new vector register class broke rename in the O3
CPU due to an unhandled register class in
DefaultRename<Impl>::renameSrcRegs(). This patch fixes adds the
necessary handling to avoid a panic when the vector register file is
used.

Change-Id: Ie380ab35ec4a151db15402f25b25b58931ee0581
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4140
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu,o3: Fixed checkpointing bug occuring in the o3 CPU

Checkpointing a system with out-of-order CPUs might get stuck if
one of the CPUs has been put to sleep. The quiesce instruction
cannot get drained hence checkpointing never finishes.

This commit resolves that by activating all suspended thread
contexts when draining the system.

Change-Id: I817ab1672b4ead777bd8e12a0445829481c46fdc
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3970
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Don't treat new stats as a cause for failures

We currently fail the stat diff stage of tests if there are new
stats. This is usually undesirable since this would require any change
that adds a stat to also update the regressions.

Change-Id: Ieadebac6fd17534e1b49b6b9a1d56f037a423325
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3962
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim, x86: Make clone a virtual function

This fixes the function call to clone in syscall_emul.hh where
the x86 version should be called before the base implementation
of clone.

Change-Id: Iccd2f680ff6e3a5536037d688a80ab3f236bbd98
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3902
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

x86: Add stats to X86 TLB

Change-Id: Iebf7d245de66eebc8d4c59e62e52adf6cf51e1e4
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3980
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

riscv: Define register index constants using literals

To make it clearer what the register indices are for the semantically
meaningful registers defined by src/arch/riscv/registers.hh, the
constants that were defined using other constants were changed to use
the literal values of those constants.  This also removes the need to
use the M5_VAR_USED attribute.

Change-Id: I7cccbe45d3d820deb5149a5925415735f6ae2e61
Reviewed-on: https://gem5-review.googlesource.com/4080
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

riscv: Disambiguate between the C and C++ versions of isnan and isinf.

When both the C and C++ versions are visible, the compiler will complain that
it doesn't know which one to use. By specifying the std namespace, it will
know to use the C++ version.

Change-Id: Ie1bbe1d95eadbad9644b4915c21f924d7d5c0b22
Reviewed-on: https://gem5-review.googlesource.com/4060
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

tests: Upate RISC-V binaries and results

This patch updates the binaries and results for hello and insttest
regressions using the compressed extension.

Change-Id: I3d8f2248f490521d3e0dc05c48735cab82b1b04e
Reviewed-on: https://gem5-review.googlesource.com/4042
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

riscv: Fix bugs with RISC-V decoder and detailed CPUs

This patch fixes some bugs that were missed with the changes to the
decoder that enabled compatibility with compressed instructions. In
order to accommodate speculation with variable instruction widths, a few
assertions in decoder had to be changed to returning faults as the
specification describes should normally happen.  The rest of these
assertions will be changed in a later patch.

[Remove commented-out debugging line and add clarifying comment to
registerName in utility.hh.]

Change-Id: I3f333008430d4a905cb59547a3513f5149b43b95
Reviewed-on: https://gem5-review.googlesource.com/4041
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

riscv: Add unused attribute to some registers.hh constants

Three of the constants defined in arch/riscv/registers.hh
(ReturnValueReg, SyscallNumReg, and SyscallPseudoReturnReg) may cause
the compiler to warn that they are unused, which results in an error.
This patch adds M5_VAR_USED attributes to them to stop this.

Change-Id: Ie6389a55e8ffb3d003a47d02e76bdf9fb5219457
Reviewed-on: https://gem5-review.googlesource.com/4040
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-arm: fix ldm of pc interswitching branch

The LDM instruction that loads to the PC causes a branch to the
instruction. In ARMv5T+ the branch can interswitch Thumb and ARM modes.
The interswitch is broken prior to this commit, with LDM to the PC
ignoring the switch.

Change-Id: I6aad073206743f3435c9923e3e2218bfe32c7e05
Reviewed-on: https://gem5-review.googlesource.com/3520
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

ruby: Refactor some Event subclasses to lambdas

Change-Id: I9f47a20a869553515a759d9a29c05f6ce4b42d64
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3930
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm: Refactor some Event subclasses to lambdas

Change-Id: Ic59add8afee1d49633634272d9687a4b1558537e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3929
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Refactor some Event subclasses to lambdas

Change-Id: I965d31ff8ad1658b03a902bf4244d7d0977b0466
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3928
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

net: Refactor some Event subclasses to lambdas

Change-Id: I0e23f1529b26c36d749bf5211ee8623744d0b10f
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3927
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

testers: Refactor some Event subclasses to lambdas

Change-Id: I897b6162a827216b7bad74d955c0e50e06a5a3ec
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3926
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm, mem: Refactor some Event subclasses into lambdas

Change-Id: Ifafdcf4692d58a17f90e66ff8de8fa3e146c34bb
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3924
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Refactor some Event subclasses to lambdas

Change-Id: If765c6100d67556f157e4e61aa33c2b7eeb8d2f0
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3923
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

gpu-compute: Refactor some Event subclasses to lambdas

Change-Id: Ic1332b8e8ba0afacbe591c80f4d06afbf5f04bd9
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3922
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

sim, gdb: Refactor some Event subclasses into lambdas

Change-Id: If3e4329204f27eda96b50ec6ac279ebc6ef23d99
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3921
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mips, x86: Refactor some Event subclasses into lambdas

Change-Id: I09570e569efe55f5502bc201e03456738999e714
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3920
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util,arch-arm: Added python script to generate ARM FS binaries

This python script builds the bootloaders, kernels and DTBs for the
VExpress_GEM5_V1 (aarch32/aarch64), VExpress_EMM and VExpress_EMM64
platforms (it checkouts some linux kernel repositories when needed).

This is the result of this e-mail thread in gem5-dev mailing list:
http://www.mail-archive.com/gem5-dev@gem5.org/msg22406.html

Change-Id: Ida8f9b974f7188f48be8f84f14828a1973d6d256
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/3945
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, sim: Add param to force CPUs to wait for GDB

By setting the BaseCPU parameter wait_for_dbg_connection, the GDB
server blocks during initialisation waiting for the remote debugger to
connect before starting the simulated CPU.

Change-Id: I4d62c68ce9adf69344bccbb44f66e30b33715a1c
[ Update info message to include remote GDB port, rename param. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3963
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch-riscv,tests: Add insttests for RV64C

This patch adds instruction tests for the RV64C extension
implementation.  It also updates existing executables for the latest
riscv-tools now that they are compatible.

[Update for changes to parents.]

Change-Id: Id4cfd966a8cae39b0d728b02849622fd00ee7e0e
Reviewed-on: https://gem5-review.googlesource.com/3862
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-riscv: Add support for compressed extension RV64C

This patch adds compatibility with the 64-bit compressed extension to
the RISC-V ISA, RV64C.  Current versions of the toolchain may use
compressed instructions in glibc by default, which can only be
overridden by recompiling the entire toolchain (simply adding
"-march=rv64g" or "-march=rv64imafd" when compiling a binary is not
sufficient to use uncompressed instructions in glibc functions in the
binary).

[Update diassembly generation for new RegId type.]
[Rebase onto master.]

Change-Id: Ifd5a5ea746704ce7e1b111442c3eb84c509a98b4
Reviewed-on: https://gem5-review.googlesource.com/3860
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-riscv: Restructure ISA description

This patch restructures the RISC-V ISA description to use fewer classes
and improve its ability to be extended with nonstandard extensions in
the future. It also cleans up the disassembly for some of the CSR and
system instructions by removing source and destination registers for
instructions that don't have any.

[Fix class UImmOp to have an "imm" member rather than "uimm".]
[Update disassembly generation for new RegId class.]

Change-Id: Iec1c782020126e5e8e73460b84e31c7b5a5971d9
Reviewed-on: https://gem5-review.googlesource.com/3800
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

dev-arm: Add ID registers to the GIC model

Implement GICD_IIDR, GICC_IIDR, GICD_PIDR0, GICD_PIDR1, GICD_PIDR2,
and GICD_PIDR3.

Change-Id: I4f6b5a6303907226e7d8e2f677543b3868c02e7b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3961

arch-arm: Support PMU evens in the 0x4000-0x4040 range

ARMv8.1 added a second architected event range, 0x4000-0x4040. Events
in this range are discovered using the high word of PMCEID{0,1}_EL0

Change-Id: I4cd01264230e5da4c841268a7cf3e6bd307c7180
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3960

dev-arm: Don't unconditionally overwrite bootloader params

The bootloader arguments were previously defaulting to a predetermined
value even if initialized elsewhere in the platform config script.
This commit fixes this issue by not calling the default initialization
routine if the bootloader is already defined.

Change-Id: Id80af4762b52dc036da29430b2795bb30970a349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3967

dev: Fix OnIdle test in DmaReadFifo

OnIdle() is never called since DMA active check is completely
opposite to what it should be. old active status should be 'true'
and new active status should be false for OnIdle to be called

Change-Id: I94eca50edbe96113190837c7f6e50a0d061158a6
Reported-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3966
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>

dev: Fix address type promotion issues in VirtIO devices

With the change we explicitly update the types for the VirtIO bit
masks to be Addr (uint64_t). By changing this, we ensure type
promotion where it is needed. Therefore, this fixes issues where, in
certain situations, address calculations were performed in 32-bits,
resulting in overflows.

Change-Id: I5c5c3f9a3f94e806812282da01268e18ae0d2d39
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3968

sim: Fix clashing stat names in TickedObject and Ticked

Change tickCycles numCycles stat name to totalTickCycles os as not to
clash with the name of the tickCycles stat of the same class.
Declared the params passed to the TickedObject constructer as const.
Call ClockedObject::regStats() from the TickedObject::regStats to
ensure the correct initialization of the base class (ClockedObject)
stats

Change-Id: I6cf5bbe10fa27f2ad0e31d9f70ec3be47fe41455
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3964
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

kvm, arm: don't create interrupt events while saving GIC state

If an interrupt was pending according to Kvm state during a drain,
the Pl390 model would create an interrupt event that could not be
serviced, preventing the system from draining.  The proper behavior
is for the Pl390 not actively being used for simulation to just skip
the GIC state machine that delivers interrupts.

Change-Id: Icb37e7e992f1fb441a9b3a26daa1bb5a6fe19228
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

kvm, arm: Don't forward IRQ/FIQ when using the kernel's GIC

The BaseArmKvmCPU is responsible for forwarding the IRQ and FIQ
signals from gem5's simulated GIC to KVM. However, these signals
shouldn't be used when the in-kernel GIC emulator is used.

Instead of delivering the interrupts to the guest, we should just
ignore them since any such pending interrupts are likely to be an
artifact of CPU switching or incorrect draining.

Change-Id: I083b72639384272157f92f44a6606bdf0be7413c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3660

arch: ISA parser additions of vector registers

Reiley's update :) of the isa parser definitions. My addition of the
vector element operand concept for the ISA parser. Nathanael's modification
creating a hierarchy between vector registers and its constituencies to the
isa parser.

Some fixes/updates on top to consider instructions as vectors instead of
floating when they use the VectorRF. Some counters added to all the
models to keep faithful counts.

Change-Id: Id8f162a525240dfd7ba884c5a4d9fa69f4050101
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2706
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Added interface for vector reg file

This patch adds some more functionality to the cpu model and the arch to
interface with the vector register file.

This change consists mainly of augmenting ThreadContexts and ExecContexts
with calls to get/set full vectors, underlying microarchitectural elements
or lanes. Those are meant to interface with the vector register file. All
classes that implement this interface also get an appropriate implementation.

This requires implementing the vector register file for the different
models using the VecRegContainer class.

This change set also updates the Result abstraction to contemplate the
possibility of having a vector as result.

The changes also affect how the remote_gdb connection works.

There are some (nasty) side effects, such as the need to define dummy
numPhysVecRegs parameter values for architectures that do not implement
vector extensions.

Nathanael Premillieu's work with an increasing number of fixes and
improvements of mine.

Change-Id: Iee65f4e8b03abfe1e94e6940a51b68d0977fd5bb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues and CC reg free list initialisation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2705

arch: added generic vector register

This commit adds a new generic vector register to have a cleaner
implementation of SIMD ISAs.

Nathanael's idea, Rekai's implementation.

Change-Id: I60b250bba6423153b7e04d2e6988d517a70a3e6b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2704
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Result refactoring

The Result union used to collect the result of an instruction is now a
class of its own, with its constructor, and explicit casting methods for
cleanliness.

This is also a stepping stone to have vector registers, and instructions
that produce a vector register as output.

Change-Id: I6f40c11cb5e835d8b11f7804a4e967aff18025b9
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2703
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Simplify the rename interface and use RegId

With the hierarchical RegId there are a lot of functions that are
redundant now.

The idea behind the simplification is that instead of having the regId,
telling which kind of register read/write/rename/lookup/etc. and then
the function panic_if'ing if the regId is not of the appropriate type,
we provide an interface that decides what kind of register to read
depending on the register type of the given regId.

Change-Id: I7d52e9e21fc01205ae365d86921a4ceb67a57178
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2702

cpu: Physical register structural + flat indexing

Mimic the changes done on the architectural register indexes on the
physical register indexes. This is specific to the O3 model. The
structure, called PhysRegId, contains a register class, a register
index and a flat register index. The flat register index is kept
because it is useful in some cases where the type of register is not
important (dependency graph and scoreboard for example). Instead
of directly using the structure, most of the code is working with
a const PhysRegId* (typedef to PhysRegIdPtr). The actual PhysRegId
objects are stored in the regFile.

Change-Id: Ic879a3cc608aa2f34e2168280faac1846de77667
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2701
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, cpu: Architectural Register structural indexing

Replace the unified register mapping with a structure associating
a class and an index. It is now much easier to know which class of
register the index is referring to. Also, when adding a new class
there is no need to modify existing ones.

Change-Id: I55b3ac80763702aa2cd3ed2cbff0a75ef7620373
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Fix RISCV build issues ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2700

arm,kvm: update CP15 timer model when exiting Kvm

The ARM MiscRegs implementation has two interfaces: 'normal'
and 'no effect'.  The latter acts as a way to access the
backing store without architectural 'effects'.  For instance,
a normal write to a timer compare value would call into the
timer model to emulate the device.  The 'no effect' interface,
however, would just write the value into the register backing
store and do nothing else.

For Kvm execution, a delicate balance must be struck for the
timer device specifically.  We need the code in the model
to be run, because it contains state other than the register
backing store that must stay in sync.  On the other hand, we
don't necessarily want the timer model to schedule gem5
events when this happens.

In this commit, we ensure that we use the 'effectful'
MiscReg interface when copying the CP15 timer registers
from Kvm back into gem5.  The prior commit makes sure
that this doesn't generate unnecessary timer events
or interrupts.

Change-Id: Id414c2965bd07fc21ac95e3d581ccc9f55cef9f9
Reviewed-on: https://gem5-review.googlesource.com/3543
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev,arm: add Kvm mode of operation for CP15 timer

The timer device exposed via the ARM ISA, also known as the
"CP15 timer" due to its legacy coprocessor encodings, is
implemented by the GenericTimerISA class.  During Kvm
execution, however, this functionality is directly emulated
by the hardware.

This commit subclasses the GenericTimer, which is (solely)
used by GenericTimerISA, to facilitate Kvm in much the same
way as the prior GIC changes: the gem5 model is used as the
backing store for state, so checkpointing and CPU switching
work correctly, but isn't used during Kvm execution.

The added indirection prevents the timer device from creating
events when we're just updating its state, but not actually
using it for simulation.

Change-Id: I427540d11ccf049c334afe318f575146aa888672
Reviewed-on: https://gem5-review.googlesource.com/3542
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev,arm: remove and recreate timer events around drains

Having timer events stored in checkpoints complicates Kvm
execution.  We change the timer behavior so that it always
deschedules any pending events on a drain() and recreates
them on a drainResume(), thus they will never appear in
checkpoints henceforth.  This pattern of behavior makes
it simpler to handle Kvm execution, where the hardware
performs the timer function directly.

Change-Id: Ia218868c69350d96e923c640634d492b5c19cd3f
Reviewed-on: https://gem5-review.googlesource.com/3541
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

kvm: move Kvm check from ARM Kvm GIC to System

The check was nearly completely generic anyway,
with the exception of the Kvm CPU type.

This will make it easier for other parts of the
codebase to do similar checks.

Change-Id: Ibfdd3d65e9e6cc3041b53b73adfabee1999283da
Reviewed-on: https://gem5-review.googlesource.com/3540
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config, arm: Don't import timing models for missing CPUs

When importing the cores.arm package, we currently throw an exception
if a timing model can't be imported due to a missing dependency (e.g.,
the required CPU model wasn't included in the build). This is
undesirable since it prevents other, working, timing models from being
added to the package. Wrap the import_module call in a try-except
block and skip timing models that have missing dependencies.

Change-Id: I92bab62c989f433a8a4a7bf59207d9d81b3d19e1
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3946
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config: Clean up core timing model discovery

Instead of hard-coding timing models in CpuConfig.py, use
introspection to find them in the cores.arm model package.

Change-Id: I6642dc9cbc3f5beeeec748e716c9426c233d51ea
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3944
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config: Move core timing models to config/common/cores

Change-Id: I189b6462cc64f7cc6c1b7a6c2af1abb60e1854de
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3943
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config: Make ex5_*.py independent of old configs

The ex5_LITTLE and ex5_big configs currently depend on Caches.py and
O3_ARM_v7a.py. These aren't actual dependencies since all of the
params from the caches and the old O3 model are overridden. This
changeset updates the ex5 models to derive from the base SimObjects
instead.

Change-Id: I999e73bb9cc21ad96865c1bc0dd5973faa48ab61
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3942
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config: Add missing import of 'fatal' in CpuConfig

Change-Id: I7762d344cb964c3e010135ff928c6ea12538912c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3941
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config: Make some MemConfig options optional

MemConfig currently assumes that all callers include the its full set
of options in the command line parser. This is unnecessary and
sometimes confusing. Make most of the options optional to avoid having
to add all of them to example scripts.

Change-Id: I2d73be2454427b00db16716edcfd96a47133c888
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3940
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: Fix memleak in Pl390 by adding destructor

Change-Id: I3395e64311f6aa7bbfb6eee9bfec82e832bcbd4d
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3901
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Fix memleak in VGic by adding destructor

Change-Id: I864b5d9ed655cc52e440e2eb54987e8ff9a73296
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3900
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mem-cache: Add missing overrides to BaseCache

Change-Id: I6a3a57e3067c247bd6ce6f01ac9459883f4aae2c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3880
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arm,sim: fix context switch stats dumps for ARM64/Linux

32bit and 64bit Linux have different arguments passed to the
__switch_to() function that gem5 hooks into in order to collect context
switch statistics. 64bit Linux provides the task_struct pointer to the
next task that will be switched to, which means we don't have to look
up the task_struct from thread_info as we do in 32bit ARM Linux.

This patch adds a second set of accessors to ThreadInfo to extract
details such as the pid, tgid, task name, etc., directly from a
task_struct. The existing accessors maintain their existing behavior by
first looking up the task_struct and then calling these new accessors.

A 64-bit variant of the DumpStatsPCEvent class is added that uses these
new accessors to get the task details for the context switch dumps
directly from the task_struct passed to __switch_to().

Change-Id: I63c4b3e1ad64446751a91f6340901d5180d7382d
Reviewed-on: https://gem5-review.googlesource.com/2640
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim: Updated ClockedObject power state warning

To prevent this warning from printing for *every* simulation, this patch
adds a check to only print the warning if we are not at the beginning of
simulation.

Change-Id: I7f6154f0ca26bef6280f909f799aa1c7936b624a
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/3840
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim, x86: Replace EventWrapper use with EventFunctionWrapper

Change-Id: Ie1df07b70776208fc3631a73d403024636fc05a9
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3749
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

dev: Replace EventWrapper use with EventFunctionWrapper

Change-Id: I6b03cc6f67e76dffb79940431711ae6171901c6a
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3748
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Replace EventWrapper use with EventFunctionWrapper

Change-Id: I08de5f72513645d1fe92bde99fa205dde897e951
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3747
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, gpu-compute: Replace EventWrapper use with EventFunctionWrapper

Change-Id: Idd5992463bcf9154f823b82461070d1f1842cea3
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3746
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem: Replace EventWrapper use with EventFunctionWrapper

NOTE: With this change there is a possibility for `DRAMCtrl::Rank`s
event names to not properly match the rank they were generated by. This
could occur if the public rank member is modified after the Rank's
construction. A patch would mean refactoring Rank and `DRAMCtrl`b to
privatize many of the members of Rank behind getters.

Change-Id: I7b8bd15086f4ffdfd3f40be4aeddac5e786fd78e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3745
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Replace EventWrapper in PacketQueue with EventFunctionWrapper

In order to replicate the same `name()` output with `PacketQueue`, subclasses
using EventFunctionWrapper must initialize PacketQueue with their own name so
the sendEvent holds the name of the subclass.

Change-Id: Ib091e118bab8858192e1d1370d61def42958ec29
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3744
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

sim: Add generic EventFunctionWrapper

Add EventFunctionWrapper, an event wrapper which takes any callable
object to use as its callback. (This includes c++ lambdas, function
pointers, bound functions, and std::functions.)

Change-Id: Iab140df47bd0f7e4b3fe3b568f9dd122a43cee1c
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3743
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

mem: Move the Rank construction logic to the Rank constructor

This change was made so Rank objects have their name assigned
when they are instantiated. Therefore, they can initialize their
member objects with their name and it is less likely to change during
runtime.

(NOTE: I would recommend hiding the fields which would cause the name to
change behind getters. Since modification of `Rank.rank` during runtime
will cause the `name()` to change.)

Change-Id: Id51c3553b40e489792c57950e18b8ce927e43173
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3742
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

sim: Remove DelayFunction

`DelayFunction` is unused.

Change-Id: I28aa756054c9b121fe4cfa65c393366f26ccb128
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3741
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

configs, arm: add option to enable security extensions

Change-Id: I0c839bb649a5d2d73080b7e718da3c9b5839cf8c
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3264
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arm: ignore writes to the reset_ctl register

Change-Id: I953521572e6ace475b656369c9f07ddfa50d731a
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3263
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, arm: add a9mpcore global timer device

Change-Id: I6d8a5e3795291b2a4cce022f555cf4b04f997538
Signed-off-by: Gedare Bloom <gedare@rtems.org>
Reviewed-on: https://gem5-review.googlesource.com/3262
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev, virtio: Use of Unix socket for virtIO 9P device

This commit adds support for diod to use a unix socket, rather
than a TCP port.  We don't rely on the IP-based connection as we
directly use pipes to interact with diod.  This allows it to work
on any system, even if the specific port is taken by another diod
instance (or similar).  Secondly, the Unix socket could in theory
be used to debug.  However, this functionality has not been
tested.

Change-Id: I616e0ad8768da1dfc867de3af98cdfbb22a72d63
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2820
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

tests: Fix a typo for the default MI_example protocol

Change-Id: I1c88ba45e4fee3c254db06cac46045dfe6e68524
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3795
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

x86: Add consistent overrides to process.hh

Change-Id: I912601b6f781a0bbedd06583c059589374f6d5c6
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3720
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joe.gross@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

x86: Fixed remote debugging of simulated code

GDB breaks if more bytes are sent than the transmitted registers
actually need. Therefore the GdbRegCache struct needs to be packed to
prevent padding at the end.

Change-Id: Ib2c14eb70becdac609eb4f475d5dddbd5bcc60da
Signed-off-by: Matthias Hille <matthiashille8@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/3020
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

configs: fixed SimpleOpts missing error by adding library path

Change-Id: I0de761c8a322a506e436d5c7f12ee509535f52fd
Reviewed-on: https://gem5-review.googlesource.com/2801
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-garnet: Fix garnet stats

This patch fix some statistics that in presence of a resetStats
instruction were not  reseted. This bug makes impossible to obtain
reliable network statistics when the simulation doesn't start from tick
zero.

Change-Id: Ibec45f08d95bf0a533d94b70ec960719206ae945
Maintainer: Tushar Krishna <tushar@ece.gatech.edu>
Reviewed-on: https://gem5-review.googlesource.com/3700
Reviewed-by: Jieming Yin <bjm419@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Add ARM MOESI_CMP_directory regressions

Change-Id: I3d9c1249a2d39f20fb60c4d4e8af7d1d5731dbef
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2908
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>