daily update

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh: Document what PUSH_DUMMY_CALL replaces.
* gdbarch.h, gdbarch.c: Re-generate.

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh: Document what UNWIND_DUMMY_ID replaces.  Clarify
when deprecated REGISTER macros can be deleted.
* gdbarch.h, gdbarch.c: Re-generate.

* solib-svr4.c (solib_break_names): Recognize the 64-bit PowerPC
Linux entry point symbols for _dl_debug_state, too.

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* infcall.c (call_function_by_hand): When UNWIND_DUMMY_ID is
available, do not use the FP register, and always save the TOS.
* dummy-frame.c (dummy_frame_this_id): Do not assert
SAVE_DUMMY_FRAME_TOS.
* i386-tdep.c (i386_save_dummy_frame_tos): Delete function.
(i386_gdbarch_init): Do not set save_dummy_frame_tos.
(i386_push_dummy_call): Add 8 to the returned SP.
* frame.c (legacy_frame_p): Do not require SAVE_DUMMY_FRAME_TOS.
* d10v-tdep.c (d10v_unwind_dummy_id): Use d10v_unwind_sp.
(d10v_gdbarch_init): Do not set save_dummy_frame_tos.
* x86-64-tdep.c (x86_64_save_dummy_frame_tos): Delete function.
(x86_64_push_dummy_call): Return "sp + 16".
(x86_64_init_abi): Do not set save_dummy_frame_tos.
* alpha-tdep.c (alpha_gdbarch_init): Do not set
save_dummy_frame_tos.

Fix typo in ChangeLog.

* frv-tdep.c (frv_use_struct_convention): Delete static
declaration for function deleted in my change of 2003-06-12.

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* gdbint.texinfo (Target Architecture Definition): Deprecate
REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT, and
BIG_REMOTE_BREAKPOINT.  Cross reference BREAKPOINT_FROM_PC.

* avr-tdep.c (avr_address_to_pointer): Shift code addrs right 1 bit.
(avr_pointer_to_address): Shift code addrs left 1 bit.
(avr_convert_from_func_ptr_addr): Delete function since operation is
better handled by avr_address_to_pointer and avr_pointer_to_address.
(avr_gdbarch_init): Don't set convert_from_func_ptr_add method.

From Kelley Cook  <kelleycook@wideopenwest.com>:
* configure.host: Accept i[34567]86 variants.
* configure.tgt: Likewise.
* nlm/configure.in: Likewise.
* nlm/configure: Regenerated.

* gas/arm/arm.exp: Pass -mfpu=fpa option to the FPA instruction test.

* arm-tdep.c (solib-svr4.h): Dont' include it.
(arm_linux_svr4_fetch_link_map_offsets): Move to ...
* arm-linux-tdep.c: ... here.  Make static.
(arm_linux_init_abi): Register it.
(solib-svr4.h): Include it.
* Makefile.in: Update dependencies.
* config/arm/tm-linux.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
(arm_linux_svr4_fetch_link_map_offsets): Delete declaration.

* tc-arm.c (FPU_DEFAULT, case TE_LINUX): Default to FPU_ARCH_FPA.
(FPU_DEFAULT, case TE_NetBSD): Default to FPU_ARCH_VFP for ELF,
FPU_ARCH_FPA for AOUT.
(md_begin): Don't try to guess the floating point architecture from
the CPU if the OS ABI (Linux, NetBSD) mandates a particular form.

Missed include update in previous commit.

* arm-tdep.c (solib-svr4.h): Dont' include it.
(arm_linux_svr4_fetch_link_map_offsets): Move to ...
* arm-linux-tdep.c: ... here.  Make static.
(arm_linux_init_abi): Register it.
(solib-svr4.h): Include it.
* Makefile.in: Update dependencies.
* config/arm/tm-linux.h (SVR4_FETCH_LINK_MAP_OFFSETS): Delete.
(arm_linux_svr4_fetch_link_map_offsets): Delete declaration.

Add i386-netbsd-gnu target.

(GNU_ABI_TAG_NETBSD): New tag.
(GNU_ABI_TAG_FREEBSD): New tag.

* h8300-tdep.c: Add definitions E_RET0_REGNUM and E_RET1_REGNUM to
indicate registers used for return values.
(struct frame_extra_info): Drop args_pointer and locals_pointer.
(h8300_examine_prologue): Remove initializing dropped frame_extra_info
members.
(h8300_init_extra_frame_info): Ditto.
(h8300_frame_locals_address): Removed.
(h8300_frame_args_address): Removed.
(h8300_extract_return_value): Use new regcache structure. Only care
for 16 bit CPUs.
(h8300h_extract_return_value): Same function for 32 bit CPUs.
(h8300_store_return_value): Use new regcache structure. Only care
for 16 bit CPUs.
(h8300h_store_return_value): Same function for 32 bit CPUs.
(h8300_store_struct_return): Removed.
(h8300_extract_struct_value_address): Use new regcache structure.
(h8300h_extract_struct_value_address): Removed.
(h8300_push_dummy_code): New function.
(h8300_gdbarch_init): Slightly rearranged to stress deprecated calls.
Remove call_dummy_words.  Call set_gdbarch_extract_return_value and
set_gdbarch_store_return_value architecture dependent.
Call set_gdbarch_push_dummy_code and
set_gdbarch_extract_struct_value_address.
Remove calls to set_gdbarch_frame_args_address,
set_gdbarch_frame_locals_address,
set_gdbarch_deprecated_store_struct_return,
set_gdbarch_deprecated_extract_return_value,
set_gdbarch_deprecated_extract_struct_value_address,
set_gdbarch_deprecated_call_dummy_words and
set_gdbarch_deprecated_sizeof_call_dummy_words.

* h8300-tdep.c (h8300_register_byte): Remove.
(h8300h_register_byte): Remove.
(h8300_register_virtual_type): Remove.  Substitute by...
(h8300_register_type): New function.
(h8300_extract_struct_value_address): Drop usage of h8300_register_byte.
(h8300h_extract_struct_value_address): Ditto.
(h8300_gdbarch_init): Drop calls to
set_gdbarch_deprecated_register_byte and
set_gdbarch_deprecated_register_virtual_type.
Add call to set_gdbarch_register_type.

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh: Update comments on registers, re-order.
(deprecated_register_byte): Rename register_byte.
(deprecated_register_raw_size): Rename register_raw_size.
(deprecated_register_virtual_size): Rename register_virtual_size.
(deprecated_register_virtual_type): Rename register_virtual_type.
* gdbarch.h, gdbarch.c: Re-generate.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Update.
* vax-tdep.c (vax_gdbarch_init): Update.
* v850-tdep.c (v850_gdbarch_init): Update.
* sparc-tdep.c (sparc_gdbarch_init): Update.
* sh-tdep.c (sh_gdbarch_init): Update.
* s390-tdep.c (s390_gdbarch_init): Update.
* rs6000-tdep.c (rs6000_gdbarch_init): Update.
* ns32k-tdep.c: Update.
* mn10300-tdep.c (mn10300_gdbarch_init): Update.
* mips-tdep.c (mips_gdbarch_init): Update.
* mcore-tdep.c (mcore_gdbarch_init): Update.
* m68k-tdep.c (m68k_gdbarch_init): Update.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Update.
* ia64-tdep.c (ia64_gdbarch_init): Update.
* hppa-tdep.c (hppa_gdbarch_init): Update.
* h8300-tdep.c (h8300_gdbarch_init): Update.
* frv-tdep.c (frv_gdbarch_init): Update.
* cris-tdep.c (cris_gdbarch_init): Update.
* avr-tdep.c (avr_gdbarch_init): Update.
* alpha-tdep.c (alpha_gdbarch_init): Update.
* arm-tdep.c (arm_gdbarch_init): Update.

2003-06-13  Andrew Cagney  <cagney@redhat.com>

* mips-tdep.c (mips_gdbarch_init): Replace remaining instances of
mips_o32_use_struct_convention with always_use_struct_convention.

merge from gcc

2003-06-12  David Carlton  <carlton@kealia.com>

* cp-namespace.c (cp_set_block_scope): Comment out
processing_has_namespace_info branch.

Recognize and skip 64-bit PowerPC Linux linkage functions.
* ppc-linux-tdep.c (insn_d, insn_ds, insn_xfx, read_insn, struct
insn_pattern, insns_match_pattern, d_field, ds_field): New
functions, macros, and types for working with PPC instructions.
(ppc64_standard_linkage, PPC64_STANDARD_LINKAGE_LEN,
ppc64_in_solib_call_trampoline, ppc64_standard_linkage_target,
ppc64_skip_trampoline_code): New functions, variables, and macros
for recognizing and skipping linkage functions.
(ppc_linux_init_abi): Use ppc64_in_solib_call_trampoline and
ppc64_skip_trampoline_code for the 64-bit PowerPC Linux ABI.

* ppc-linux-nat.c (ppc_register_u_addr): Correctly compute u-area
register offsets for both the 32- and 64-bit interfaces.

*** empty log message ***

daily update

Actually finish the job started by my change of 2003-05-29.
* config/powerpc/tm-linux.h (SKIP_TRAMPOLINE_CODE): Remove the
other #definition of this.
(ppc_linux_skip_trampoline_code): Remove declaration.
* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Make this
static.
(ppc_linux_init_abi): Register it as the skip_trampoline_code
method for GDBARCH.

* config/powerpc/nm-ppc64-linux.h (PTRACE_XFER_TYPE): This is
'long' on ppc64-*-linux*.

* ppc-linux-nat.c (ppc_register_u_addr, fill_gregset): If PT_MQ
isn't #defined, assume the register doesn't exist: act as if
tdep->ppc_mq_regnum were -1.

* configure.host, configure.tgt: Add entries for
powerpc64-*-linux, selecting powerpc/ppc64-linux.mh and
powerpc/linux.mt.
* config/powerpc/ppc64-linux.mh, config/powerpc/nm-ppc64-linux.mh:
New files.

* arch-utils.c (always_use_struct_convention): New function.
* arch-utils.h (always_use_struct_convention): New prototype.
* alpha-tdep.c (alpha_use_struct_convention): Delete.
(alpha_gdbarch_init): Register always_use_struct_convention,
instead of alpha_use_struct_convention.
* cris-tdep.c (cris_use_struct_convention): Delete.
(cris_gdbarch_init): Register always_use_struct_convention,
instead of cris_use_struct_convention.
* frv-tdep.c (frv_use_struct_convention): Delete.
(frv_gdbarch_init): Register always_use_struct_convention,
instead of frv_use_struct_convention.
* h8300-tdep.c (h8300_use_struct_convention): Delete.
(h8300_gdbarch_init): Register always_use_struct_convention,
instead of h8300_use_struct_convention.
* mips_o32-tdep.c (mips_o32_use_struct_convention): Delete.
(mips_o32_gdbarch_init): Register always_use_struct_convention,
instead of mips_o32_use_struct_convention.

2003-06-12  Andrew Cagney  <cagney@redhat.com>

* wince.c: Include "mips-tdep.h".
* mips-tdep.h (mips_next_pc): Declare.
* mcore-tdep.c: Make more local functions static.
* Makefile.in (wince.o): Update dependencies.

2003-06-12  Jeff Johnston  <jjohnstn@redhat.com>

        * gdb.base/float.exp: Add ia64 support.

* ld-mips-elf/elf-rel-got-n64-linux.d: New file.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: New file.
* ld-mips-elf/mips-elf.exp: Use the new files for Linux.

* MAINTAINERS: Add myself as MIPS co-maintainer.

Merge these:
2003-06-11  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

* configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
* configure. Regenerate.

2003-06-10  Nathanael Nerode  <neroden@gcc.gnu.org>

* configure.in: Disable serial configure by default.
* configure: Regenerate.
* Makefile.tpl: Abolish .NOTPARALLEL.
* Makefile.in: Regenerate.

2003-06-12  David Carlton  <carlton@kealia.com>

* symtab.c (lookup_symbol_aux_minsyms): Replace
DEPRECATED_SYMBOL_NAME by SYMBOL_LINKAGE_NAME.
(find_pc_sect_line, search_symbols, rbreak_command): Ditto.
(COMPLETION_LIST_ADD_SYMBOL): Rewrite in terms of
SYMBOL_NATURAL_NAME.

* Makefile.in (tuiDisassem.o): Update dependencies.

tui:
* tuiSource.c (tuiVerticalSourceScroll): Use get_frame_pc.
* tuiSourceWin.c (tuiHorizontalSourceScroll): Likewise.
* tuiStack.c (tui_get_function_from_frame): Likewise.
(tuiShowFrameInfo): Likewise.
* tuiWin.c (_makeVisibleWithNewHeight): Likewise.
* tui-hooks.c (tui_selected_frame_level_changed_hook): Likewise.
* tuiDisassem.c (tuiVerticalDisassemScroll): Likewise.
Include "disasm.h".

2003-06-12  David Carlton  <carlton@bactrian.org>

* symtab.h: Delete declaration of make_symbol_overload_list.
Add declaration of lookup_partial_symbol.
* symtab.c (remove_params): Move to cp-support.c.
(overload_list_add_symbol, make_symbol_overload_list)
(sym_return_val_size, sym_return_val_index): Ditto.
(lookup_partial_symbol): Make extern.
* cp-support.h: Add declaration of make_symbol_overload_list.
* cp-support.c: Include dictionary.h, objfiles.h, frame.h,
symtab.h, and block.h.
(remove_params): Move here from symtab.c.
(overload_list_add_symbol, make_symbol_overload_list)
(sym_return_val_size, sym_return_val_index): Ditto.
* valops.c: Include cp-support.h.
* Makefile.in (cp-support.o): Depend on dictionary_h, objfiles_h,
frame_h, and block_h.
(valops.o): Depend on cp_support_h.

2003-06-12  H.J. Lu <hongjiu.lu@intel.com>

* config.guess: Update to 2003-06-06 version.
* config.sub: Update to 2003-06-06 version.

* doc/as.texinfo (Comm): Added @node.  Moved before CFI
directives node.

* h8300-tdep.c: Add H8SX registers. Drop E_NUM_REGS entirely,
substitute by NUM_REGS throughout.
(h8300_register_name): Only care for H8/300 and H8/300H registers.
(h8300s_register_name): New function for H8S registers.
(h8300sx_register_name): Ditto for H8SX registers.
(h8300_print_register): Revise register printing, avoid depending
on 32 bit long.
(h8300_register_byte); Only care for H8/300 registers.
(h8300h_register_byte): New function for any other architecture.
(h8300_register_raw_size): Remove.
(h8300_register_virtual_type): Revise to return actually useful
type.
(h8300_extract_struct_value_address): Only care for H8/300 registers.
(h8300h_extract_struct_value_address): New function for any other
architecture.
(h8300_gdbarch_init): Add h8300sxn.  Call set_gdbarch_num_regs,
set_gdbarch_register_name, set_gdbarch_register_byte,
set_gdbarch_ptr_bit and set_gdbarch_addr_bit architecture dependent.
Remove calls to set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_bytes, set_gdbarch_register_raw_size,
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_register_virtual_size and
set_gdbarch_deprecated_max_register_virtual_size entirely.
Call set_gdbarch_long_long_bit, set_gdbarch_double_bit and
set_gdbarch_long_double_bit.

* gdb.base/fileio.exp: Run only on remote targets.

Add new switch to objcopy: --add-gnu-debuglink=<file>
Allows packages to be shipped in two forms, a stripped executable and debug
info file.

(i[3-7]86-*-openbsd[0-2].* | i[3-7]86-*-openbsd3.[0-3]): New target (was i[3-7]86-*-openbsd* before).
(i[3-7]86-*-openbsd*): Change to use bfd_elf32_i386_vec.
(vax-*-openbsd*): New target.

* configure.tgt (mips*-sgi-irix6*): Add the o32 and n64 emulations
to $targ_extra_libpath.

* config/tc-mips.c (append_insn): In a compound relocation, take the
field width from the final (outermost) operator.

daily update

*** empty log message ***

2003-06-11  Jeff Johnston  <jjohnstn@redhat.com>

        * doublest.c (convert_doublest_to_floatformat): When dealing
        with the implied integer bit, only alter mant_bits if we are
        processing a full 32 bits of mantissa.

2003-06-11  David Carlton  <carlton@bactrian.org>

* dictionary.h: New.
* dictionary.c: New.
* block.h: Add opaque declaration for struct dictionary.
(struct block): Add 'dict' member; delete 'hashtable', 'nsyms',
'sym' members.
(BLOCK_DICT): New macro.
Delete macros BLOCK_HASHTABLE, BLOCK_NSYMS, BLOCK_SYM,
BLOCK_BUCKETS, BLOCK_BUCKET, BLOCK_HASHTABLE_SIZE,
BLOCK_SHOULD_SORT.
(ALL_BLOCK_SYMBOLS): Update definition.
* Makefile.in (SFILES): Add dictionary.c.
(dictionary_h): New.
(COMMON_OBS): Add dictionary.o.
(dictionary.o): New.
(ada-lang.o): Depend on dictionary_h.
(buildsym.o, coffread.o, jv-lang.o, mdebugread.o, objfiles.o)
(stack.o, symmisc.o, symtab.o, tracepoint.o, valops.o)
(mi-cmd-stack.o): Ditto.
(gdbtk-cmds.o): Update dependencies.
(gdbtk-stack.o): Ditto.
* ada-lang.c: Include dictionary.h.
(symtab_for_sym): Update uses of ALL_BLOCK_SYMBOLS.
(fill_in_ada_prototype, debug_print_block): Ditto.
(ada_add_block_symbols): Update uses of ALL_BLOCK_SYMBOLS; replace
explicit iteration by use of ALL_BLOCK_SYMBOLS.  Delete variable
'is_sorted'.
* mdebugread.c: Include dictionary.h.
(struct parse_stack): Delete 'maxsyms' member.
(parse_symbol): Update calls to new_block.  Delete calls to
shrink_block.  Use dictionary methods.
(psymtab_to_symtab_1): Delete calls to sort_symtab_syms.
Update calls to new_symtab.  Don't maintain maxsyms data.
(mylookup_symbol): Update use of ALL_BLOCK_SYMBOLS.
(add_symbol): Just call dict_add_symbol.
(new_symtab): Delete 'maxsyms' argument.
(new_symtab): Update calls to new_block.
(new_block): Delete 'maxsyms' argument; add 'function' argument.
(shrink_block): Delete function.
(fixup_sigtramp): Update call to new_block.  Add symbol via
dict_add_symbol.
* jv-lang.c: Include dictionary.h.
(get_java_class_symtab): Set the BLOCK_DICT of the blocks
appropriately.  Set class_symtab->free_func.  Make sure the
blockvector is big enough to hold two blocks.
(add_class_symtab_symbol): Use dictionary methods.
(free_class_block): New function.
(type_from_class): Replace explicit iteration by
ALL_BLOCK_SYMBOLS.
* symtab.h (struct symtab): Replace 'free_ptr' method by
'free_func'.
* dwarf2read.c (psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* dwarfread.c (psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* coffread.c (coff_symfile_read): Delete call to sort_symtab_syms.
Include dictionary.h.
(patch_opaque_types): Update use of ALL_BLOCK_SYMBOLS.
* dbxread.c (dbx_psymtab_to_symtab_1): Delete call to
sort_symtab_syms.
* objfiles.c: Include dictionary.h.
(objfile_relocate): Update use of ALL_BLOCK_SYMBOLS.
* buildsym.c: Include dictionary.h.
(finish_block): Use dictionary methods.
(end_symtab): Set free_func to NULL, not free_ptr.
* tracepoint.c: Include dictionary.h.
(add_local_symbols): Update use of ALL_BLOCK_SYMBOLS.
(scope_info): Ditto.
* stack.c: Include dictionary.h.
(print_block_frame_locals): Update use of ALL_BLOCK_SYMBOLS.
(print_block_frame_labels, print_frame_arg_vars)
(print_frame_args): Ditto.
* symmisc.c (free_symtab_block): Use dictionary methods.
(dump_symtab): Ditto.
(free_symtab): Replace use of 'free_ptr' by 'free_func'.
Include dictionary.h.
* symfile.h: Delete declarations of sort_block_syms,
sort_symtab_syms.
* symfile.c (sort_block_syms): Delete.
(sort_symtab_syms): Delete.
* symtab.c: Include dictionary.h.
(lookup_block_symbol): Use dictionary iterators.
(find_pc_sect_symtab): Update use of ALL_BLOCK_SYMBOLS.
(search_symbols, make_symbol_completion_list): Ditto.
(make_symbol_overload_list): Ditto.
* valops.c (value_of_local): Use dict_empty.
Include dictionary.h.

2003-06-11  David Carlton  <carlton@bactrian.org>

* generic/gdbtk-stack.c: Include dictionary.h.
(gdb_block_vars): Update use of ALL_BLOCK_SYMBOLS.
(gdb_get_blocks, gdb_get_vars_command): Ditto.
* generic/gdbtk-cmds.c: Include dictionary.h.
(gdb_listfuncs): Update use of ALL_BLOCK_SYMBOLS.

2003-06-11  David Carlton  <carlton@bactrian.org>

* mi-cmd-stack.c: Include dictionary.h.
(list_args_or_locals): Update use of ALL_BLOCK_SYMBOLS.

    * dw2gencfi.c (struct cfi_escape_data): New.
        (cfi_add_CFA_nop): Remove.
        (CFI_escape, dot_cfi_escape): New.
        (dot_cfi): Remove nop.
        (cfi_pseudo_table): Remove nop; add escape.
        (output_cfi_insn): Likewise.
        (select_cie_for_fde): Stop on escape.
        * dw2gencfi.h (cfi_add_CFA_nop): Remove.
        * read.c, read.h (do_parse_cons_expression): New.
        * doc/as.texinfo (.cfi_escape): New.

        * gas/cfi/cfi-common-3.[ds]: New.
        * gas/cfi/cfi.exp: Run it.

* ld-mips-elf/relax-jalr.s: Fix testsuite breakage.
* ld-mips-elf/relax-jalr-n32.d: Likewise.
* ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* ld-mips-elf/relax-jalr-n64.d: Likewise.
* ld-mips-elf/relax-jalr-n64-shared.d: Likewise.

    * win32-nat.c (solib_symbols_add): Fix a small compilation error.

2003-06-11  David Carlton  <carlton@bactrian.org>

* block.h (BLOCK_SHOULD_SORT): Delete.
* symtab.c (lookup_block_symbol): Don't worry about sorted linear
blocks.
* ada-lang.c (ada_add_block_symbols): Ditto.
* symfile.c (sort_block_syms): Delete.
(sort_symtab_syms): Ditto.
* symfile.h: Delete sort_symtabs_syms and sort_block_syms
declarations.
* coffread.c (coff_symfile_read): Don't call sort_symtab_syms.
* dbxread.c (dbx_psymtab_to_symtab_1): Ditto.
* dwarf2read.c (psymtab_to_symtab_1): Ditto.
* dwarfread.c (psymtab_to_symtab_1): Ditto.
* hpread.c (hpread_psymtab_to_symtab_1): Ditto.
* mdebugread.c (psymtab_to_symtab_1): Ditto.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Ditto.

2003-06-11  Jeff Johnston  <jjohnstn@redhat.com>

        * ia64-tdep.c (ia64_gdbarch_init): Set number of long double
        bits to 128.

* elfxx-mips.c (MIPS_ELF_OPTIONS_SECTION_NAME): Use .MIPS.options
for n32, too.
(MIPS_ELF_STUB_SECTION_NAME): Use .MIPS.stubs for n32, too.
(mips_elf_rel_dyn_section): Use appropriate section alignment.
(mips_elf_create_got_section): Likewise.
(_bfd_mips_elf_create_dynamic_sections): Likewise.
* ld-mips-elf/multi-got-1.d: Adjust addresses.
* ld-mips-elf/rel32-n32.d: Likewise.

* config/tc-mips.c (s_cpsetup): Use mips_frame_reg instead of SP.
(s_cprestore): Likewise.
(s_cpreturn): Likewise.

* config/tc-mips.c (tc_gen_reloc): Initialize retval amd reloc
with zeros.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* gdbarch.sh (DEPRECATED_REGISTER_CONVERTIBLE): Deprecate
REGISTER_CONVERTIBLE.
(DEPRECATED_REGISTER_CONVERT_TO_VIRTUAL): Same.
(DEPRECATED_REGISTER_CONVERT_TO_RAW): Same, make "from" constant.
* gdbarch.h, gdbarch.c: Re-generate.
* arch-utils.h (deprecated_register_convertible_not): Rename
generic_register_convertible_not.
* arch-utils.c (deprecated_register_convertible_not): Rename
generic_register_convertible.
(legacy_convert_register_p, legacy_register_to_value): Update.
* sh-tdep.c (sh64_push_arguments): Update.
* m68klinux-tdep.c (m68k_linux_extract_return_value): Update.
* config/m68k/tm-delta68.h (DEPRECATED_EXTRACT_RETURN_VALUE): Update.
* m68klinux-tdep.c (m68k_linux_store_return_value): Update.
* config/m68k/tm-delta68.h (DEPRECATED_STORE_RETURN_VALUE): Update.
* arch-utils.c (legacy_value_to_register): Update.
* rs6000-tdep.c (rs6000_gdbarch_init): Update.
(rs6000_register_convert_to_raw): Make parameter "from" const.
* mips-tdep.c (mips_gdbarch_init): Update.
(mips_register_convert_to_raw): Make  parameter"virt_buf" const.
* infcmd.c (default_print_registers_info): Update.
* ia64-tdep.c (ia64_gdbarch_init): Update.
(ia64_register_convert_to_raw): Make parameter "from" const.
* i386-tdep.c (i386_gdbarch_init): Update.
(i386_register_convert_to_raw): Update.

* elf32-mips.c (mips_elf_generic_reloc): New Function.
(elf_mips_howto_table_rel): Use it.
(gprel32_with_gp): Move prototype.
(mips_elf_hi16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Use mips_elf_generic_reloc.
(mips_elf_got16_reloc): Check for ! BSF_LOCAL instead of zero addend.
Code cleanup.
(_bfd_mips_elf32_gprel16_reloc): Check for ! BSF_LOCAL instead of
zero addend.
(mips_elf_gprel32_reloc): Likewise. Use the same GP assignment logic
as in the other *_gprel*_reloc functions.
(gprel32_with_gp): Handle partial_inplace properly.
(mips32_64bit_reloc): Use mips_elf_generic_reloc.
(mips16_gprel_reloc): Check for ! BSF_LOCAL instead of zero addend.
Do addend handling directly instead of calling
_bfd_mips_elf_gprel16_with_gp. Handle partial_inplace properly.
* elf64-mips.c (mips_elf64_hi16_reloc): Check for ! BSF_LOCAL instead
of zero addend. Handle partial_inplace properly.
(mips_elf64_got16_reloc): Check for ! BSF_LOCAL instead of zero
addend.
(mips_elf64_gprel16_reloc): Likewise.
(mips_elf64_literal_reloc): Likewise.
(mips_elf64_gprel32_reloc): Likewise. Use the same GP assignment
logic as in the other *_gprel*_reloc functions. Handle
partial_inplace properly.
(mips_elf64_shift6_reloc): Check for ! BSF_LOCAL instead of zero
addend. Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfn32-mips.c (mips_elf_got16_reloc): Check for BSF_LOCAL.
(mips_elf_gprel32_reloc): Check for ! BSF_LOCAL instead
of zero addend.
(mips_elf_shift6_reloc): Handle partial_inplace properly.
(mips16_gprel_reloc): Likewise. Do addend handling directly instead
of calling _bfd_mips_elf_gprel16_with_gp.
* elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Handle
partial_inplace properly. Fix wrong addend handling. Fix overflow
check.
(_bfd_mips_elf_sign_extend): Renamed from mips_elf_sign_extend and
exported.
(mips_elf_calculate_relocation): Use _bfd_mips_elf_sign_extend.
(_bfd_mips_elf_relocate_section): Likewise.
(mips_elf_create_dynamic_relocation): Update sec_info_type access.
* elfxx-mips.h (_bfd_mips_relax_section): Fix prototype declaration.
(_bfd_mips_elf_sign_extend): New prototype.
* config/tc-mips.c (md_pcrel_from): Return actual pcrel address.
(md_apply_fix3): Ignore non-special relocations. Remove superfluous
exceptions from size assert. Remove most of the addend fixup
specialcasing. Remove value, use valP directly. simplify fx_addnumber
handling. Remove zero addend specialcases.
(tc_gen_reloc): Use appropriate value for reloc2 addend. Remove
the addend fixup specialcase.
* config/tc-mips.h (MD_APPLY_SYM_VALUE): Define as 0.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* remote-fileio.c: Include "remote-fileio.h".
* Makefile.in (remote-fileio.o): Update dependencies.
(remote_fileio_h): Fix typo.

* configure.in (vax-*-openbsd*): Set COREFILE to netbsd-core.lo.
* configure: Regenerate.

* config.bfd (sparc-*-openbsd[0-2].* | sparc-*-openbsd3.[0-1]): New target
  (was sparc-*-openbsd* before).
  (sparc-*-openbsd*): Change to use bfd_elf32_sparc_vec.

2003-06-11  Andrew Cagney  <cagney@redhat.com>

* xstormy16-tdep.c (xstormy16_push_return_address): Make static.
(xstormy16_save_dummy_frame_tos): Make static.
(_initialize_xstormy16_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* v850-tdep.c: Make local functions static.
(_initialize_v850_tdep): Add declaration.
* sparc-tdep.c: Make local functions static.
(_initialize_sparc_tdep): Add declaration.
* sh-tdep.c: Make local functions static.
(_initialize_sh_tdep): Add declaration.
* sh3-rom.c (_initialize_sh3_rom): Add declaration.
* s390-tdep.c: Make local functions static.
(_initialize_s390_tdep): Add declaration.
* dbxread.c (find_stab_function_addr): Make static.
* ppc-bdm.c (_initialize_bdm_ppc): Add declaration.
* ocd.c (_initialize_remote_ocd): Add declaration.
* dink32-rom.c (_initialize_dink32_rom): Add declaration.
* ppcbug-rom.c (_initialize_ppcbug_rom): Add declaration.
* ns32k-tdep.c (_initialize_ns32k_tdep): Add declaration.
* ns32knbsd-tdep.c (_initialize_ns32knbsd_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* remote-array.c (_initialize_array): Add declaration.
(_initialize_remote_monitors): Add declaration.
* remote-mips.c: Make local functions static.
(_initialize_remote_mips): Add declaration.
* mcore-tdep.c: Make all local functions static.
(_initialize_mcore_tdep): Add declaration.
* dbug-rom.c (_initialize_dbug_rom): Add declaration.
* abug-rom.c (_initialize_abug_rom): Add declaration.
* rom68k-rom.c (_initialize_rom68k): Add declaration.
* cpu32bug-rom.c (_initialize_cpu32bug_rom): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* remote-est.c (_initialize_est): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
(m68hc11_call_dummy_address): Make static.
* ia64-tdep.c: Make local functions static.
(_initialize_ia64_tdep): Add declaration.
* solib-legacy.c (_initialize_svr4_lm): Add declaration.
* monitor.c (monitor_wait_filter): Make static.
(_initialize_remote_monitors): Add declaration.
* remote-hms.c (_initialize_remote_hms): Add declaration.
* remote-e7000.c (fetch_regs_from_dump): Make static.
(expect_n): Make static.
(_initialize_remote_e7000): Add declaration.
* ser-e7kpc.c: Always include "defs.h".
(_initialize_ser_e7000pc): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* cris-tdep.c: Make all but one function static.
(_initialize_cris_tdep): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib.c (update_solib_list): Make static.
(_initialize_solib): Add declaration.
* avr-tdep.c (avr_breakpoint_from_pc): Make static.
(_initialize_avr_tdep): Add declaration.
* remote-rdi.c (voiddummy): Make static.
(_initialize_remote_rdi): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* remote-rdp.c (send_rdp): Make static.
(_initialize_remote_rdp): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.

* write.c (write_relocs): Use xcalloc. Fix relocs initialization
in the RELOC_EXPANSION_POSSIBLE case.

* remote-fileio.c: Make ari happy.

* ld-srec/srec.exp (run_srec_test): Remove powerpc64 xfails, and
xfail for hppa duplicated elsewhere.

* config/tc-i960.c (line_comment_chars): Add '#'.
* config/tc-mn10200.c (tc_gen_reloc): Don't ignore fx_subsy.

* gas/macros/app1.d: Ignore section symbols.
* gas/macros/app2.d: Likewise.
* gas/macros/app3.d: Likewise.
* gas/macros/app4.d: Likewise.

bfd/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

binutils/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

gas/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

gprof/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

ld/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

opcodes/

2003-06-06  H.J. Lu <hongjiu.lu@intel.com>

* po/Make-in (DESTDIR): New.
(install-data-yes): Support $(DESTDIR).
(uninstall): Likewise.

*** empty log message ***

daily update

* bfd/Makefile.am (config.status): Depend on version.h.
Run "make dep-am" in bfd/ and elsewhere, and regen files.

* Makefile.am (ALL_EMULATIONS): Add em32relf.o.
* Makefile.in: Regenerate.

* Makefile.tpl: Replace {build,host,target}_canonical by
{build,host,target}.
* Makefile.in: Regenerate.

opcodes:
* cgen-asm.in (@arch@_cgen_assemble_insn): CGEN_INSN_RELAX renamed to
CGEN_INSN_RELAXED.
* fr30-asm.c,fr30-desc.c,fr30-desc.h: Regenerate.
* frv-asm.c,frv-desc.c,frv-desc.h: Regenerate.
* ip2k-asm.c,ip2k-desc.c,ip2k-desc.h: Regenerate.
* iq2000-asm.c,iq2000-desc.c,iq2000-desc.h: Regenerate.
* m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-opc.c: Regenerate.
* openrisc-asm.c,openrisc-desc.c,openrisc-desc.h: Regenerate.
* xstormy16-asm.c,xstormy16-desc.c,xstormy16-desc.h: Regenerate.
gas:
* cgen.c (gas_cgen_finish_insn): CGEN_INSN_RELAX renamed to
CGEN_INSN_RELAXED.
* config/tc-fr30.c (md_estimate_size_before_relax): Ditto.
* config/tc-m32r.c (md_estimate_size_before_relax): Ditto.
* config/tc-openrisc.c (md_estimate_size_before_relax): Ditto.

* frv.cpu: Add IDOC attribute.

    * rs6000-nat.c (child_xfer_memory): Compute the right address when
        fetching the trailing bytes of the buffer we are about to write.

* gas/mips/mips.exp: Fix typo.
* gas/mips/elempic.d: Force o64 ABI.
* gas/mips/telempic.d: Likewise.
* ld-mips-elf/rel32-n32.d: Force big endian assembly.
* ld-mips-elf/rel32-o32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.

Merge the separate remote-fileio changelogs so that they reflect reality.

2003-06-10  Andrew Cagney  <cagney@redhat.com>

* remote-fileio.h (REMOTE_FILEIO_H): Replace FILEIO_H.
* Makefile.in (remote-fileio.o): Update dependencies.
* remote-fileio.c: Include "gdb_wait.h" and "gdb_stat.h".  Do not
include <setjmp.h>, or <sys/types.h> conditional on USG.
(remote_fio_jmp_buf): Delete global variable.

* gdb.base/fileio.c: New file, testing File-I/O.
* gdb.base/fileio.exp: Ditto.

* Makefile.in: Add dependencies for remote-fileio.o.
* remote-fileio.c: New file implementing the remote File-I/O protocol.
* remote-fileio.h: New header file defining remote File-I/O interface.
* remote.c (remote_write_bytes, remote_read_bytes): Remove
static storage class.
(remote_wait, remote_async_wait): Call remote_fileio_request() on
'F' packet.
(_initialize_remote): Call initialize_remote_fileio().
* remote.h: Declare remote_write_bytes() and remote_read_bytes().

* Makefile.in (REMOTE_OBS): Add remote-fileio.o
(SFILES): Add remote-fileio.c.
Add dependencies for building remote-fileio.o.  Add remote-fileio.h to
dependencies for building remote.o.
* defs.h: Declare gdb_stdin, gdb_stdtargerr and gdb_stdtargin.
* main.c: New ui_file gdb_stdin, gdb_stdtargerr and gdb_stdtargin.
(captured_main): Initialize new ui_files.
* ui-file.c: Add read and fgets input functions.
(ui_file_new): set ui_file_fputs and ui_file_read to null functions.
(null_file_read): New function.
(ui_file_read): New function.
(set_ui_file_read): New function.
(stdio_file_read): New function.
* ui-file.h: New type ui_file_read_ftype.
(set_ui_file_read): Declare.
(ui_file_read): Declare.

* gdb/fileio.h: New file.

* Makefile.tpl: Fix stupid pasto.
* Makefile.in: Regenerate.

* gas/cfi/cfi.exp: Use here.  Only run tests when ELF.
* gas/macros/and.s: Avoid .set so we don't break mips.

* gas/macros/and.s: Avoid .set so we don't break mips.

* gas/macros/and.s: New.
* gas/macros/macros.exp: Assemble it.

* scripttempl/h8300sxn.sc: New file.

Add "attn", "lq" and "stq" power4 insns.

include/opcode/
* h8300.h (IMM4_NS, IMM8_NS): New.
(h8_opcodes): Replace IMM4 with IMM4_NS in mov.b and mov.w entries.
Likewise IMM8 for mov.w and mov.l.  Likewise IMM16U for mov.l.

gas/testsuite
* gas/h8300/h8sx_mov_imm.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

opcodes/
* h8300-dis.c (bfd_h8_disassemble): Don't print brackets round
rts/l and rte/l register lists.

gas/
* config/tc-h8300.c (get_rtsl_operands): Accept unbracketed register
lists.  Allow single-register ranges.

testsuite/
* gas/h8300/h8sx_rtsl.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

* gas/h8300/h8sx_disp2.[sd]: New test.
* gas/h8300/h8300.exp: Run it.

Fix last changelog.

include/elf/
* h8.h (E_H8_MACH_H8300SXN): New flag.

bfd/
* archures.c (bfd_mach_h8300sxn): New architecture.
* bfd-in2.h: Regenerate.
* cpu-h8300.c (h8300_scan): Check for 'sxn'.
(h8300sxn_info_struct): New.
(h8300sx_info_struct): Link to it.
* elf32-h8300.c (elf32_h8_mach): Add h8300sxn case.
(elf32_h8_final_write_processing): Likewise.

gas/
* config/tc-h8300.c (h8300sxnmode): New.
(md_pseudo_table): Add .h8300sxn entry.  Sync others with FSF version.

ld/
* configure.tgt (h8300*): Add h8300sxn emulations.
* Makefile.am (ALL_EMULATIONS): Add eh8300sxn.o and eh8300sxnelf.o.
(eh8300sxn.c, eh8300sxnelf.c): New rules.
* Makefile.in: Regenerate.
* emulparams/h8300sxnelf.sh, emulparams/h8300sxn.sh: New files.

2003-06-09  H.J. Lu <hongjiu.lu@intel.com>

* NEWS: Updated for the new -n option for the i386 assembler.

* config/tc-i386.c (optimize_align_code): New.
(md_shortopts): Add 'n'.
(md_parse_option): Handle 'n'.
(md_show_usage): Add '-n'.

* config/tc-i386.h (optimize_align_code): Declared.
(md_do_align): Optimize code alignment only if optimize_align_code
is not 0.

* doc/as.texinfo: Add the new -n option.

* doc/c-i386.texi: Document the new -n option.

* ld-elfvsb/elfvsb.exp: Run for powerpc64 too.
* ld-powerpc/tls.t: Update.
* ld-powerpc/tlsexe.d: Update.
* ld-powerpc/tlsexe.r: Update.
* ld-powerpc/tlsexetoc.d: Update.
* ld-powerpc/tlsexetoc.r: Update.
* ld-powerpc/tlsexetoc.t: Update.
* ld-powerpc/tlsso.d: Update.
* ld-powerpc/tlsso.g: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlsso.t: Update.
* ld-powerpc/tlstocso.d: Update.
* ld-powerpc/tlstocso.g: Update.
* ld-powerpc/tlstocso.r: Update.
* ld-powerpc/tlstocso.t: Update.

* emulparams/elf64ppc.sh (EXECUTABLE_SYMBOLS, OTHER_BSS_END_SYMBOLS,
CTOR_START, CTOR_END, DTOR_START, DTOR_END): Don't define.