board: rename ts to technologic

Other projects, such as Linux [1] and U-Boot [2], use "technologic" for
this manufacturer. To be more consistent across all of them, rename the
board/ts folder to board/technologic.

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/vendor-prefixes.txt
[2] http://git.denx.de/?p=u-boot.git;a=tree;f=board/technologic;hb=HEAD

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

i386: properly define BR2_ARCH for all x86 subarchitectures

We were not defining BR2_ARCH for two of the x86 subarchitecture,
which means the architecture part of the GNU_TARGET_NAME tuple was
empty, leading to weird build failures.

This commit fixes that by defining the appropriate values.

Fixes bug #8861.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: atmel: xplained boards: bump to linux4sam_5.3

Bump defconfigs relative to Xplained boards to linux4sam_5.3 release. It
involves to use at91bootstrap v3.8.5.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: define modules inter-dependencies

OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).

However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
For further details about the issues this situation was causing, refer
to this discussion [1].

This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
This changes completes this work [2].

[1] http://lists.busybox.net/pipermail/buildroot/2016-April/159017.html
[2] https://git.buildroot.org/buildroot/commit/?id=3bd5025038a9ecfb2c19a2450a68ae3b0888b440

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts/check-host-rpath: also check HOST_DIR/{bin, sbin}

At least syslinux is installing stuff in HOST_DIR/sbin.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-firmware: bump version

This commit bumps the rpi-firmware to a more recent version that
includes support for the Raspberry Pi 3.

Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: create icon-theme.cache for icon themes

It makes icon lookups faster, though it's not strictly necessary.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: enclsoe the hook definition in the condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: build gtk-encode-symbolic-svg for host variant

It's required to create the symbolic icons (RGBA/transparent) which some
apps like to use, like connman-gtk.
The added patch avoids the need for a full host-libgtk3 build which would
require host-libepoxy, host-mesa3d and a ton other deps.
And pull in host-librsvg so that we have the rsvg gdk-pixbuf loader
(plugin), otherwise scalable (svg) icons will error when trying to be
processed, like those provided by adwaita-icon-theme.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

shairport-sync: bump to version 2.8.2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-validate: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-ugly: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-base: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: bump to version 1.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-download: ignore hashes from mirror for VCS downloads

When a download via a VCS method fails, Buildroot attempts the download
from the backup mirror (if any is set). Such a download is done with the
wget helper.

Given a package that has a .hash file for relase tarballs, which also
allows the user to use a random revision from a VCS, the normal download
wrapper will not check for hashes, on the assumption that maybe they are
not reproducible [*] (or user configurable).

However, when the download fails (for any reason: network error,
upstream removed the revision, old machine with incomplete set of CA
certificates...), the backup download now proceeds over with http (or
https) with the wget wrapper. The wget wrapper *always* checks for
hashes, and when a .hash file is present but no hash is found for the
download, this is considered an error.

However, when we download from the backup mirror for a main download that
should have been done with git/hq/svn/.., we in this situation have no hash
for the download.  Thus, we should not fail on a missing hash for that
download. Same situation if a primary site is used.

Add a test for the site-method in the DOWNLOAD_INNER macro; if it was either
one of the VCS method, pass a one-off BR_NO_CHECK_HASH_FOR variable set to
contain the tarball to download.

Fixes issues like those reported by the Travis build bots:
    https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123624879

[Peter: Move logic to beginning of DOWNLOAD_INNER so it also applies for BR2_PRIMARY_SITE]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: CodeSourcery NiosII 2015.11 affected by PR19405

See bug report https://sourceware.org/bugzilla/show_bug.cgi?id=19405

Fixes:
http://autobuild.buildroot.net/results/ee562524c5b12191e584ceae89006c5a5103e700

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
 - rename BR2_TOOLCHAIN_BINUTILS_HAS_BUG_19405 to
   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405
 - propagate to the qwt package, which is now selecting
   BR2_PACKAGE_QT_GUI_MODULE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vpnc: simplify patch 0001

Patch 0001 that adjusts the Makefile to solve cross-compilation issues
does a lot of whitespace changes that are unnecessary. We remove all
those noisy changes to keep only the really interesting ones.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vpnc: switch to github as the new site

The vpnc upstream project has not made any tarball release since many
years, but they have continued to update their Subversion
repository.

A Github repository synced with the Subversion repository now exists
at https://github.com/ndpgroup/vpnc, which is more practical to
generate patches and submit pull requests. For this reason, we move to
using this Github repository as the new source for the vpnc
package. The specific commit that we use corresponds to version 0.5.3
exactly.

All patches are re-formatted using Git.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

flannel: new package

Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.

Cc: Brandon Philips <brandon.philips@coreos.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
  - Don't select BR2_PACKAGE_HOST_GO since this option was removed.
  - Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
    BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
  - Rewrap Config.in help text, it was slightly too large.
  - Don't use the github function (the link was anyway incorrect), but
    instead a direct link to the tarball, since the tarballs are
    uploaded by the maintainers.
  - Update the hash accordingly.
  - Use $() to reference make variables and not ${}.
  - Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
    HOST_GO_ROOT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

go: new host package

Add a new package 'go' which builds the host cross compiler and
libraries for the go programming language.

Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
 - Put the computation of GO_GOARM inside the ifeq ($(BR2_arm),y)
   condition rather than duplicating this condition.
 - Remove the GO_GOARCH=unknown case, since there is no way to fall in
   this case as only supported architectures can use host-go.
 - Remove the GO_GOARM=unknown case, since we are sure that only
   ARMv5/6/7 will use host-go.
 - Rename HOST_GO_FINAL to HOST_GO_ROOT, since it's really the "root"
   of the Go installation.
 - Remove visible Config.in.host option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

go-bootstrap: new host package

Add a new package go-bootstrap which builds a bootstrap compiler for the
go programming language.

Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
 - Rename GO_BOOTSTRAP_FINAL to HOST_GO_BOOTSTRAP_ROOT. Use the HOST_
   prefix because this variable is specific to the host variant. And
   it's not "final" at all, but rather the "root" of the Go Bootstrap
   installation.
 - Rename GO_BOOTSTRAP_MAKE_ENV to HOST_GO_BOOTSTRAP_MAKE_ENV, also to
   have the HOST_ prefix because it's a host package.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: security bump to version 3.5.17

Fixes:
SQUID-2016:5 (CVE-2016-4051) - Buffer overflow in cachemgr.cgi
SQUID-2016:6 (CVE-2016-4052) - Multiple issues in ESI processing.
CVE-2016-4053 & CVE-2016-4054 which are part of SQUID-2016:6.

Switch to xz-compressed tarball as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: explicit latest kernel version

When setting BR2_LINUX_KERNEL_LATEST_VERSION, it is hard for the user to
know that this version is subject to change in the future.

Explicit this in the Kconfig entry text.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iperf3: bump to version 3.1.2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-certifi: bump to version 2016.2.28

Use upstream MD5 checksum.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.5.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{14, 18}.x and 4.{1, 4, 5}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssl: enable aarch64 optimization

Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sqlite: bump version to 3120200

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fio: add optional dependency on libaio

fio can automatically detect and use libaio when available, so this
commit makes this optional dependency explicit.

Suggested by Charles <ckhardin@exablox.com> in bug #8851.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: disable split-stack for non-thread builds

This fixes bug 8766:
https://bugs.busybox.net/show_bug.cgi?id=8766

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-pam: add optional libselinux and audit dependencies

This patch adds optional libselinux and audit packages
to linux-pam package.

Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tzdata: reorder zone list to avoid missing links

The 'backward' zone references entries from other zones (e.g. Pacific/*)
that have not yet been compiled, leading to missing links. To fix this,
take-over the zone list sort order from upstream 'tzdata' and also ensure
that make fails if zic terminates with a non-zero exit code.

Signed-off-by: Michel Marti <mma@objectxp.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cbootimage: new package

Add package for cbootimage host utility that is able to compile bct
files and generate flashable images out of a bct and an image for
tegra processors.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tegrarcm: new package

Add package for the tegrarcm host utility that allows loading data to
tegra processors in recovery mode.

Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas: replace cryptopp cross-compilation fix by a more
autoconf-style solution, which has been submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cryptopp: new package

Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
 - put HOST_CRYPTOPP_EXTRACT_CMDS earlier in the file, since it's what
   gets executed first.
 - fix typo in the name of HOST_CRYPTOPP_MAKE_OPTS
 - pass -fPIC in CXXFLAGS, since we're building a shared library
 - just call "make shared" for the build and "make install" for the
   installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: atmel: sama5d2 has vfpv4-d16

The datasheet indicates vfpv4 but it stands for vfpv4-d16 not vfpv4-32.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tzdata: bump version to 2016d

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/zic: bump version to 2016d

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rrdtool: bump to version 1.5.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

connman: bump to version 1.32

Drop upstream patches and add a new build fix (submitted upstream).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ccache: bump to version 3.2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/jack2: Fix build on nios2

Fixes
http://autobuild.buildroot.net/results/8f3/8f3d2139de7f85f729e0555f8513fdbd177cbadd/
http://autobuild.buildroot.net/results/5d2/5d2f049ab9fa6a1a4e3fa9884983ab66b2fccb56/
http://autobuild.buildroot.net/results/85a/85a4a7ee4cf5c0b65e4543a524909d9c0422eea4/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nvme: add optional udev support

Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
 - add comment to explain the LIBUDEV variable value
 - use += instead of = to assign <pkg>_MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi, raspberrypi2: document the two consoles (UART+HDMI)

The defconfigs for the Raspberry Pi boards start a console on HDMI in
addition to the classic one on UART. Document this feature in the
readme.

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add inter-module dependencies

As stated by Samuel the opencv2 package lacks inter-module dependencies:
http://lists.busybox.net/pipermail/buildroot/2016-April/158902.html

This patch adds the necessary code for freeswitch's mod_cv to compile.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: Allow to build multiple flavors simultaneously

This becomes handy when building hybrid images that needs to be able
to boot in MBR and GPT mode.

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/x86: remove support for i386

The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netsnmp: ensure lm-sensors is available if enabled

The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.

As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard-max: Add a X-based graphical defconfig

This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.

  * The 'openbox' windows manager is chosen because it's simple
    and lightweigth.

  * Basic X apps are enabled (such as xrandr, xterm), so we
    can at least get a console and change video mode.

  * ALSA default configuration is provided, so HDMI audio
    works out-of-the-box.

  * OpenGL is supported.

Tested on Minnoboard Turot (which is Minnowboard Max compatible).

[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard-max: Add more peripherals and features to the kernel

This commit enables support for:
  * HDMI audio
  * Support for user-provided EDID firmware
    (useful to workaround broken monitors)
  * Evdev interface
  * System V IPC (required by ALSA)

The options make the system more useful.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard: Unify Minnowboard and Minnowboard MAX boards

Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.

This commit does the following:

  1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
     and post-image.sh. These are identical to Minnowboard's.

  2) Move Minnowboard MAX's linux config, and rename it.

     It would be lovely to have a single kernel config file.
     The kernel size penalty involved in adding support for
     all the peripherals on both boards is small enough to
     justify this.

     However, the original Minnowboard has some GPIO buttons
     that need to be registered by the kernel. This is not
     upstreamed, and hence we need to use the yocto v3.8 kernel
     to have this support.

  3) Rename each grub config to grub-{board}.cfg.

  4) Modify (the now unique) post-build script to use
     a different grub config, according to the board.

  5) Update both defconfigs, as per the above changes.

  6) Finally, update the readme.txt.

[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/minnowboard: Rework to generate SD card image

Let's rework the board and config files to use genimage
to generate the SD card image directly.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/pkg-kconfig: Do not use $(call ...) without parameters

When there are no parameters, simply use $(var) instead of $(call var)

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-kconfig: Factorize make commands

Use a variable to factorize the calls to make, as we use the same set
of options multiple times.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: fix ccache hash of patches in BR2_GLOBAL_PATCH_DIR

In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:

$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch

it would look for

$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch

In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.

To fix, add the missing /

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webkit: restore package

Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.

The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a

Here is the project source tree:
https://github.com/qtproject/qtwebkit

All the patches have been pulled from Yocto as well.

Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33

Note that GPLv3 license option has been added with this release.

Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5serialbus: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas: better handling for !shared case.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5quickcontrols2: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5canvas3d: new package

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipmitool: add patch to fix missing stddef include

Needed for wchar_t. Fixes build error:

imbapi.h:140:9: error: unknown type name 'wchar_t'
 typedef wchar_t      WCHAR;

Fixes:
http://autobuild.buildroot.net/results/9e9/9e99aa8aebf68667b8c054b64e49de6dd73dd53d/
http://autobuild.buildroot.net/results/496/49637fcab9cd8e6278257158574fd7574f97bc30/
http://autobuild.buildroot.net/results/6a3/6a37f69ac40d60a1735afe5974cabec3ca5de41f/

Upstream status: Pending
https://sourceforge.net/p/ipmitool/mailman/message/35022779/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5location: new package

Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: revert minimum required ffmpeg version numbers

Fixes
http://autobuild.buildroot.net/results/e62/e62dd4dbdb4c92bc657936566e73388e76343903/
and many others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltp-testsuite: build kernel modules when appropriate

If we're building a kernel, we can also build LTP's test modules.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add qemu_xtensa_lx60_nommu_defconfig

Add noMMU configuration running on dc233c MMUv3 core with identity
memory map.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu_xtensa_lx60_defconfig: switch to dc233c

dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

elf2flt: enable for xtensa

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d/mesa3d-headers: bump version to 11.2.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: bump to version 2.28

Drop upstream patches (0004-0008).
Convert 0001-sscanf-no-ms-as.patch to git format.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: select pppd

There's no benefit on it being an autodep since it makes it harder to
find, and pppd can be selected directly.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rp-pppoe: bump to version 3.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update to uClibc-ng 1.0.14

Remove patch, which was applied upstream.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi, raspberrypi2: add a serial console

The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.

This requires three changes:
 1. have two 'console=' entries in the kernel command line: tty1,
    then ttyAMA0;
 2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
    a getty on the last console= passed to the kernel, ttyAMA0;
 3. add a new getty on tty1 to the generated inittab.

Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.

Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.

Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.

The result is these two inittab lines:

  console::respawn:/sbin/getty -L  console 0 vt100 # GENERIC_SERIAL
  tty1::respawn:/sbin/getty -L  tty1 0 vt100 # HDMI console

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: make SCTP support optional

Since version 20160414 SCTP support is optional. Introduce an automatic
optional dependency for this protocol.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts: fix graph-depends when run with python3

Make graph-depends script opening the output file in text mode since
only ascii characters will be written.

This change fixes the following error occuring when the default host
python interpreter is python3:

  make: Entering directory '/opt/buildroot'
  Getting targets
  Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
  Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
  Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
  Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
  Traceback (most recent call last):
    File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
      outfile.write("digraph G {\n")
  TypeError: a bytes-like object is required, not 'str'
  Makefile:807: recipe for target 'graph-depends' failed
  make[1]: *** [graph-depends] Error 1
  Makefile:84: recipe for target '_all' failed
  make: *** [_all] Error 2
  make: Leaving directory '/opt/buildroot'

While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).

Therefore, just open the outfile in default (i.e. text) mode.

[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/turbolua: new package

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rtptools: fix build for toolchains missinf SUN RPC headers

Use a configure check rather than checking explicitly for uClibc.

Make the patch a git patch at the same time.

Fixes:
    http://autobuild.buildroot.org/results/1cf/1cfe3e019a627e7c092dbd94e4b891179e35bedd/
    http://autobuild.buildroot.org/results/5ba/5bad40610316392c3f213c3e2a27ac76abd88de6/
    http://autobuild.buildroot.org/results/789/789ebdc6a96fc62ca5c98bdd6b90de20872ea221/
    ... and numerous similar build failures

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-uuc: new package

This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.

It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.

The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116

Init scripts are provided so that the tool starts automatically at
bootup.

Tested on Nitrogen6_MAX + MFGTools.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
 - test return value from start-stop⁻daemon in init script, and
   reindent the init script
 - fix dependency of the comment
 - rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to openldap

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_shout

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_cv

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_imagick

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_memcache

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to xz

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_soundtouch

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_alsa

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_sndfile

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_silk

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_portaudio

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_opus

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_isac

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_ilbc

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to libg7221

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_codec2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_bv

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_lua

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: enable mod_yaml

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: add optional dependency to freetype

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>