arch-riscv: Add missing license paragraphs

Some of the files in earlier patches rearranging instruction definitions
were missing copyright and license information.  This patch adds them.

Change-Id: I2ac4910a415de6032fc0b7d4422904c682e0ad87
Reviewed-on: https://gem5-review.googlesource.com/6183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: Don't override ISA if provided by user

The BaseCPU.createThreads() method currently overrides the BaseCPU.isa
parameter. This is sometimes undesirable. Change the behavior so that
the default value for the isa parameter is the empty list and teach
createThreads() to only override the ISA if none has been specified.

Change-Id: I2ac5535e55fc57057e294d3c6a93088b33bf7b84
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6121
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu-minor: Add missing instruction stats

Change-Id: I811b552989caf3601ac65a128dbee6b7bb405d7f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
[ Updated to use IsVector instruction flag. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5732
Reviewed-by: Gabe Black <gabeblack@google.com>

arch-riscv: Remove static parts of AMOs out of ISA

This patch removes the static parts of the RISC-V atomic memory
instructions out of the ISA generated code and into arch/riscv/insts. It
also makes the LR and SC instructions subclasses of MemInst from
arch/riscv/insts/mem.hh.

Change-Id: I6591f3d171045c4f1b457eb1264bbb7bd62b3e51
Reviewed-on: https://gem5-review.googlesource.com/6025
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-riscv: Move parts of mem insts out of ISA

This patch moves static portions of the memory instructions out of the
ISA generated code and puts them into arch/riscv/insts.  It also
simplifies the definitions of load and store instructions by giving
them a common base class.

Change-Id: Ic6930cbfc6bb02e4b3477521e57b093eac0c8803
Reviewed-on: https://gem5-review.googlesource.com/6024
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-riscv: Move unknown out of ISA description

This patch removes the Unknown instruction type out of the ISA generated
code and puts it into arch/riscv/insts.  Since there isn't any dynamic
behavior to it, all that's left behind is a template for creating a new
Unknown instruction.

Change-Id: If7c3258a24ecadd3e00ab74586e1740e14f028db
Reviewed-on: https://gem5-review.googlesource.com/6023
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-riscv: Move standard ops out of ISA

This patch removes static portions of the standard instruction types
from the generated ISA code and puts them into arch/riscv/insts. Some
dynamically-generated content is left behind for each individual
instruction's implementation. Also, BranchOp is removed due to its
similarity with ImmOp and ImmOp and UImmOp are joined into a single
templated class, ImmOp<T>.

Change-Id: I1bf47c8b8a92a5be74a50909fcc51d8551185a2a
Reviewed-on: https://gem5-review.googlesource.com/6022
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

cpu-o3: Add missing vector stat initializers

All of the O3 vector stats added by 'arch: ISA parser additions of
vector registers' are currently missing their stat initializers. Add
the missing stat initialization to InstructionQueue::regStats.

Change-Id: Idc4b8e2824120a2542d8a604340a1b41bde6aa28
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6101
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Add haveEL pseudocode function

This patch introduces the ARM pseudocode haveEL function
into gem5.

Change-Id: I0d96070959e8e13773eb7fa9964894ec0ff2cac2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6162
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add assertions when extracting an ArmSystem from a TC

We sometimes need to cast the System pointer stored in a
ThreadContext to an ArmSystem pointer to query global
system setting.
Add an assertion to make sure that the cast resulted in a
valid pointer.

Change-Id: Id382d0c1dceefee8f74d070c205c7b43b83ab215
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/6161
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: Move the bituniontest to be alongside the bitunion header.

Change-Id: I7c1a49c41672a1108fcf67c5505b0441f90588ef
Reviewed-on: https://gem5-review.googlesource.com/6142
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Build GTests in the directory they're declared.

This will let us move unit tests into the directory of the code they're
testing.

Change-Id: I611582eb00a06a848f3ce7da89f64e42660cb844
Reviewed-on: https://gem5-review.googlesource.com/6141
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: Reimplement the bituniontest as a googletest.

The implementation is very similar to the old test structurally, and
should test all the same things.

Change-Id: I58f1559d0943f2494ef06ee1d7ee5314a3852a8c
Reviewed-on: https://gem5-review.googlesource.com/6085
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Add in a new type of unit test called GTest.

This type of unit test is almost the same as UnitTest, except that
it builds in the googletest library with the appropriate flags, and
it also omits all the gem5 object files by default.

Change-Id: I230db7ede563a73a9da0ebeed44aca389f724465
Reviewed-on: https://gem5-review.googlesource.com/6084
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: scons: Integrate the googletest library into the build.

A static library is built using gtest-all.cc and includes the gtest
main function from gtest_main.cc. extra libraries to use when linking
are included in the main environment variable GTEST_LIBS, and extra
CPPFLAGS are in GTEST_CPPFLAGS. The library's path is added to the
library search path, and it's headers to the header search path.

Change-Id: I2bd6f705bd9fac5db9280996f574b168c11ff8ce
Reviewed-on: https://gem5-review.googlesource.com/6083
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: Import the googletest library, release version 1.8.0.

Change-Id: Ic6c1391a19238011ff5cc97f513dbdc020dc6144
Reviewed-on: https://gem5-review.googlesource.com/6082
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Minor cleanup of how partial linking is handled in makeEnv.

Git rid of the unused partial_objs variable, and change append to
extend since the result of builders is a list of nodes and not
individual nodes, even if there's only one target.

Change-Id: Ie51225d3ea699eb7da18199ac3bf3e868e3994a6
Reviewed-on: https://gem5-review.googlesource.com/5985
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-riscv: Move static_inst into a directory

This patch creates an "insts" directory in src/arch/riscv to store
static portions of instruction definitions that aren't part of the code
generated by the ISA description.  It serves as a starting point for
future patches to simplify the ISA description.

Change-Id: I6700522143f6fa6c9b18a30e1fbdc8f80cdc7afa
Reviewed-on: https://gem5-review.googlesource.com/6021
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

tests: Build the input file into the initest unit test.

This breaks an external dependency and makes the expected command line
conform to the other unit tests. Also get rid of some ancient tests
which test adding to the ini's contents based on command line
arguments.

This test still needs to be modified so that it actually checks whether
what happened was correct.

Change-Id: I2c9ea9fa79781bceb5cd3d1419870924e8bbd45f
Reviewed-on: https://gem5-review.googlesource.com/6081
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Break make_obj into make_static and make_shared functions.

The make_obj function took a boolean value which just selected which
of the two lines it in would actually do something. This change breaks
it into two lambdas, make_static and make_shared, which just do
whichever line would have been requested, making the funciton name more
self descriptive and getting rid of the generally unnamed and opaque
boolean argument.

Change-Id: I457e40034b7e7f5a3e7294a8e1f15bbd42e0720e
Reviewed-on: https://gem5-review.googlesource.com/5984
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Remove the extra_deps option from the helper function make_obj.

This had only one use, and made the function more complicated than it
needed to be.

Change-Id: I22147a0c1239b457c577a6a24b423065e539833b
Reviewed-on: https://gem5-review.googlesource.com/5983
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Get rid of a flag which makes Werror optional.

This flag wasn't being used. Also move the Werror code to the
SConstruct now that it's being applied universally.

Change-Id: I18b00d4b41bc1add9271ca299c020c14970a6926
Reviewed-on: https://gem5-review.googlesource.com/5982
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Move some compiler flag setting code to the SConstruct.

These settings are invariant, so there's no reason to apply them over
and over again for the child environments used for various build
products.

Change-Id: Icb4053105e4f1c43008f2422ba30c7206b7ff365
Reviewed-on: https://gem5-review.googlesource.com/5981
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Get rid of SourceFile's done function.

This function doesn't seem to be used by anything. A similar one off
mechanism exists for SimObjects which is we might also be able to get
rid of.

Change-Id: I65038c3495fa69cf94042dc78f09876d5e9a557f
Reviewed-on: https://gem5-review.googlesource.com/5841
Maintainer: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

scons: Switch from "guards" to "tags" on source files.

Tags are just arbitrary strings which are attached to source files
which mark them as having some property. By default, all source files
have the "gem5 lib" tag added to them which marks them as part of the
gem5 library, the primary component of the gem5 binary but also a
seperable component for use in, for example, system C.

The tags can be completely overridden by setting the "tags" parameter
on Source, etc., functions, and can be augmented by setting "add_tags"
which are tags that will be added, or alternatively additional tags.
It's possible to specify both, in which case the tags will be set to
the union of tags and add_tags. add_tags is supposed to be a way to
add extra tags to the default without actually overriding the default.
Both tags and add_tags can be a list/tuple/etc of tags, or a single
string which will be converted into a set internally.

Other existing tags include:
1. "python" for files that need or are used with python and are
   excluded when the --without-python option is set
2. "main" for the file(s) which implement the gem5 binary's main
   function.
3. The name of a unit test to group its files together.
4. Tags which group source files for partial linking.

By grouping the "tags" into a single parameter instead of taking all
extra parameters as tags, the extra parameters can, in the future, be
passed to the underlying scons environment. Also, the tags are either
present or not. With guards, they could be present and True, present
and False, or not present at all.

Change-Id: I6d0404211a393968df66f7eddfe019897b6573a2
Reviewed-on: https://gem5-review.googlesource.com/5822
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: Resurrect initest input file(s).

Delete the current version of foo.ini which was modified, restore the
previous version, and initest.ini. Preprocess initest.ini which
includes foo.ini, and tidy up the resulting file. This file will
(mostly) get the initest unit test to work. Some other cleanups are
still necessary.

Change-Id: I4e46abc73ac89f88177eec92f572452f63ba8019
Reviewed-on: https://gem5-review.googlesource.com/6041
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

tests: Fix the stats unit test.

This has been broken since February. The interface for opening
initializing where the stats output should go was changed, but the
test wasn't updated.

Change-Id: I54bd8be15bf870352d5fcfad95ded28d87c7cc5a
Reviewed-on: https://gem5-review.googlesource.com/6001
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add support for the brk instruction

Add support for software breakpoints as signalled by the aarch64 brk
instruction. This introduces a new SoftwareBreakpoint fault.

Change-Id: I93646c3298e09d7f7b0983108ba8937c7331297a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5721
Reviewed-by: Giacomo Gabrielli <Giacomo.Gabrielli@arm.com>

arch-arm: HVC instruction undefined in secure EL1

Since EL2 is not available in secure mode, any HVC call from secure mode
should be treated as undefined. This behaviour was implemented in
aarch32 HVC but not in 64 bit version

Change-Id: Ibaa4d8b1e8fe01d2ba3ef07494c09a4d3e7e87b0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5921
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-riscv: Add missing system calls

This patch adds all system calls present in riscv-gnu-toolchain at
commit hash 65cb174. Many of them do not have implementations in gem5, so
they are just placeholders.

[Remove the variadic macro and replace it with a function that has
default arguments because variadic macros may not be portable across
compilers]
[Remove spaces around default arguments of createSyscall for better
style]
[Switch from using a loose function to using SyscallDesc's new
constructor]

Change-Id: Iff97c689109121b39df423c72d0e79c6366e31b9
Reviewed-on: https://gem5-review.googlesource.com/5322
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

sim-se: Add default to SyscallDesc constructor

This patch adds a default value of unimplementedFunc to SyscallDesc's
constructor's second argument, which makes adding system call
placeholders to SE mode cleaner.

Change-Id: I3e7efb3a887cc52d16d2095d3dd2e2a96fb882fb
Reviewed-on: https://gem5-review.googlesource.com/5501
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

sparc: Move integer StaticInst base classes out of the ISA desc.

Change-Id: I24008c1e2a94ad8dc4cc13739214928eb846a496
Reviewed-on: https://gem5-review.googlesource.com/5483
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Move the mem base classes out of the ISA description.

Change-Id: Ifbeee464e2d7f872e192f065ad3494f52d274596
Reviewed-on: https://gem5-review.googlesource.com/5482
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Move the microop/macroop base classes out of the ISA desc.

These were just raw C++ classes.

Change-Id: Id2101400d885c6938efb6b94f2949722cfbb94ae
Reviewed-on: https://gem5-review.googlesource.com/5481
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Return debug faults from unimplemented instructions.

These had been marked as non-speculative so that their execute
functions would only be called if the instruction should really be
executed. Instead, we can return faults which will cause the same
behavior when the instruction is committed and let the instruction
execute as normal.

Change-Id: I39fa5073e93399424144724b99bdc12070e42286
Reviewed-on: https://gem5-review.googlesource.com/5465
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Pull the unimplemented formats out of the ISA description.

These are simple classes which don't need to be in the ISA description.

Change-Id: Ia0bb45f50c4da2536855efcb3c17c7780b431332
Reviewed-on: https://gem5-review.googlesource.com/5464
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Pull the "Uknown" StaticInst class out of the ISA description.

The only thing the Unknown format does is return an instance of this
class, so there's no reason to have it in the ISA description.

Change-Id: I3f8187b1450a8622a974c030c0cb552b26f6b5f0
Reviewed-on: https://gem5-review.googlesource.com/5463
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Pull most of the Nop format out of the ISA description.

The Nop format mostly just made instructions that inherited from the
Nop base class but with different mnemonics, so there doesn't need
to be very much dynamic content.

Change-Id: I1cf5e25ca8372f9b71f56d49756879c7545c9f6c
Reviewed-on: https://gem5-review.googlesource.com/5462
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Pull more StaticInst base classes out of the ISA desc.

These are for the trap and branch instructions.

Change-Id: Idedab6f3e6c6c954c1f8a36dae52976cf25ad394
Reviewed-on: https://gem5-review.googlesource.com/5461
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sparc: Pull flat static instruction classes out of the ISA.

These classes are just used as base classes for other instructions
and don't need to be part of the ISA definition. Pull them into
standard C++ files.

Change-Id: If3e0bd82b1e676f20459bc0293fbda49de66b554
Reviewed-on: https://gem5-review.googlesource.com/5422
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: ArmPMU refactor

Change the definition of PMU events in order to integrate events not
cannot easily be represented by probe points. The software
increment event is now defined as a special type with its separate
implementation in pmu.cc and pmu.hh.

Change-Id: I43874b9641bf38c54f6ba2c26386542b6a73e282
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5764
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Do not increment PMU cycle event in WFI/WFE

Change-Id: I09531e9992e045254e5ee989dd11ccabbf84e4ce
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5763
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, cpu, sim: move Cycle probe update

Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.

Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim: Fix need to save address space info during serialization.

This fixes a fatal already mapped error in
FuncPageTable::allocate that occurs in some cases
when restoring from a checkpoint.

Change-Id: Ib726a69358118626663e42b7f14889b0d3a98de0
Reported-by: Ruohuang Zheng <zhengruohuang@gmail.com>
Signed-off-by: Austin Harris <austinharris@utexas.edu>
Reviewed-on: https://gem5-review.googlesource.com/5901
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

scons: Build error introduced by site_tools/default.py

One of the latest commits affecting the build system introduced a change
in the environment setting: rather than using the ENV dictionary,
environment key-val pairs were saved directly into the class. This
patch reverts that behaviour.

Change-Id: If206ba0a34ac8c35695a493cb90654b7ec81971b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5941
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix MCR/MRC disassemble

This patch is fixing the Aarch32 MCR/MRC disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the coprocessor register name

Change-Id: I1937938c43680200cf6c5c9558e835ce2b209adc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5862
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Fix MSR/MRS disassemble

This patch is fixing the Aarch64 MSR/MRS disassemble, which was
previously printing unexisting integer registers as source/destination
operands rather than the system register name

Change-Id: Iac9d5f2f2fea85abd9a398320ef7aa4844d43c0e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5861
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu-o3: Prevent cpu from suspending if it is already draining

Suspending the current thread context while draining due to a quiesce
pseudo instruction (for example a wfi instruction) could deadlock the
cpu and prevent it from successfully draining. This change ensures
that the cpu is not draining before suspending the thread context.

Change-Id: I7c019847f5a870d4bc9ce2b19936bc3dc45e5fd7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5881
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Ensure counters keep events on checkpoint resume

Events were not being attached to counters after a checkpoint resume.
By not storing the enable private variable from the stored state the
recreation of the event to counter association is automatically carried.
The enable state is stored in the reg_pmcnten.

Change-Id: I46344df0882a9050c900efb2e8996d64dbfbf297
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Make automatic transition to OFF optional

Add the power_gating_on_idle option to control whether a core
automatically enters the power gated state. The default behaviour is
to transition to clock gated when idle, but not to power gated. When
this option is set to true, the core automatically transitions to the
power gated state after a configurable latency.

Change-Id: Ida98c7fc532de4140d0e511c25613769b47b3702
Reviewed-on: https://gem5-review.googlesource.com/5741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

pwr: Adds logic to enter power gating for the cpu model

If the CPU has been clock gated for a sufficient amount of time
(configurable via pwrGatingLatency), the CPU will go into the OFF
power state.  This does not model hardware, just behaviour.

Change-Id: Ib3681d1ffa6ad25eba60f47b4020325f63472d43
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3969
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sparc: Pull StaticInst base classes out of the ISA description.

Also, do some minor refactoring to use a BitUnion to pull apart
condition codes, etc.

Change-Id: I0c88878b07a731d0c0fe30f264f53dd795db99ae
Reviewed-on: https://gem5-review.googlesource.com/5421
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev: Fix the SPARC and X86 platform devices.

A recent serial device refactoring changed the name of the parameter
that the terminal device gets attached to on the UART. The x86 and
SPARC platform devices didn't get updated though, and were still using
the old name. This change updates those objects.

Reported-by: Kanad Basu <kanad.kut@gmail.com>
Change-Id: I0824a9df8639062d8561420ea9ffea26b8b7e2e9
Reviewed-on: https://gem5-review.googlesource.com/5781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Fix compilation of cprinftest.

This test has been broken since 70176fecd1ff04 in 2014. The problem was
that the array size in the test was technically not constant because it
was based on an int variable that wasn't declared as const. That
prevented g++ from resolving it as a template parameter. Before the
change mentioned above, the implementation wasn't based on templates.

Change-Id: I6819cf522f9ba4636ac661da368b9bcbae0a813f
Reviewed-on: https://gem5-review.googlesource.com/5821
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim: Implement load_addr_mask auto-calculation

Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location.  To avoid having to make this change
in the future again, we auto-calculate  the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it.  If the
configuration does specify the address mask, we use it instead of
auto-calculating.

Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

system-arm: change system/arm/aarch64_bootloader/boot.S copyright

The aarch64 boot loader was distributed using a BSD license that was
using non-standard formatting. Updated the license to match gem5's
canonical license format and removed the separete LICENSE.txt file.

Change-Id: I660b73ca5ddd922763a2b72051c73d539248ebcf
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5728
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim: ScopedMigration does nothing if both eqs are the same

Added a check to avoid unlocking/locking the same event queue. Also,
added an optional parameter to enable the migration to be skipped. This
can be useful to disable the synchronization for certain runtime
conditions.

Change-Id: I4b03b3ffff4f9503153cd41dd8aa78705bf16cc4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5730
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

util: Add script to plot DRAM low power sweep

This change adds a script to generate graphs from the stats file
output by the configuration script low_power_sweep.py.

The graphs show stacked bars for time spent and energy consumed
wherein each component of the stacked bar represents a DRAM power
state (Idle, Refresh, Active, Active Power-down, Precharge Power-down
and Self-refresh). The script generates one plot per delay value. It
also generates a pdf (--pdf option) in which the graphs are laid out
such that you can easily compare how the increasing delay and other
swept params affect the resulting energy.

Change-Id: Id80b0947bfde27e11e5505b23a3adb30f793a43f
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5727
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tests: Add tests for DRAM low power modes

This patch adds two regression tests that execute the script in the
configs dir for triggering low power mode transitions. A separate
test is required for each page policy because for close-adaptive
page policy the DRAM goes into the Precharge Power-down mode while
for open-adaptive page policy it goes into the Activate Power-down
mode.

Change-Id: Iad61af23f132db046f2857cc3ef64b2bf42cf5e4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5726
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Add low power sweep for DRAM

This change adds a Python script to sweep a few parameters with a
goal to trigger transitions to the low power states of the DRAM
controller.

This script is largely based on the sweep.py but is helpful to study
the impact of inter-transaction delay on the behaviour of the DRAM
in addition to typical sweep params like stride size, bank
utilization and read percent. An idle period is added as the last
traffic generator state to target hitting self-refresh.

Change-Id: I34380afffbf2de9f4e997dfe9fff5e615e077524
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5725
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

ext, mem: Pull DRAMPower SHA 90d6290 and rebase

This patch syncs the DRAMPower library of gem5 to the
external github (https://github.com/ravenrd/DRAMPower).

The version pulled in is the commit:
90d6290f802c29b3de9e10233ceee22290907ce6
from 30th Oct. 2016.

This change also modifies the DRAM Ctrl interaction with the
DRAMPower, due to changes in the lib API in the above version.

Previously multiple functions were called to prepare the power
lib before calling the function that would calculate the enery. With
the new API, these functions are encompassed inside the function to
calculate the energy and therefore should now be removed from the
DRAM controller.

The other key difference is the introduction of a new function called
calcWindowEnergy which can be useful for any system that wants
to do measurements over intervals. For gem5 DRAM ctrl that means we
now need to accumulate the window energy measurements into the total
stat.

Change-Id: I3570fff2805962e166ff2a1a3217ebf2d5a197fb
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5724
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

pwr: Enable multiple power models per component

This patch allows the user to specify more than one
power model for any given Clocked Object. This is
useful and some times necessary to properly model
components that have multiple power sources (or
subcomponents) but gem5 doesn't model them.

The ideal solution would be to have a DictParam
to replace the VectorParam so each model can have
a name and can be identified in the stats file.

Change-Id: I4080a7054a16b56069c44750a7a9ce4e674cdf9d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5733
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch, arm: Print value being ignored on DummyISA write

When ignoring writes to the Dummy ISA device (DummyISADevice),
additionally print the value being ignored in the diagnostic.

Sometimes it is useful to know exactly what we are dropping ...

Change-Id: I9a01623611f0da0aa12b065fbb2031aa27e2c036
Signed-off-by: Sean McGoogan <Sean.McGoogan@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5731
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim: Clocked object debug message updated for clarity

Change-Id: I5bbf36ef21ac14d9edf68ec6766d33f88e84d308
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5729
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim: Add an option to load additional kernel objects

There are cases where it is desirable to load a kernel and a set of
additional objects. This can, for example, be useful for testing where
the bootstrap code can be loaded from one object (the kernel) and the
test proper from another.

This changeset adds this functionality by adding a kernel_extras
vector parameter to the System class. Object files in this vector are
loaded in order after the kernel when running in full system mode.

Change-Id: I06f57c6a65a17b02eb4267bed0aa829f21bcfa3b
Reviewed-on: https://gem5-review.googlesource.com/5703
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Dsb instruction shouldn't flush the pipeline

DSB Instruction shouldn't flush the pipeline, hence the IsSquashAfter
attribute will be removed for either the 32 and 64 bit version.

Change-Id: I98b2b8bc78aa28445ed1a9b5f34645f8d71616ad
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5363
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Writes to DCCMVAC shouldn't flush pipeline

Writes to DCCMVAC (Data Cache line Clean by VA to PoC) system register
shouldn't flush the pipeline as a result of the operation. This addition
was wrongly introduced for supporting self-modifying code. Software
barriers should be used instead.

Change-Id: Idf0c27d2e49ca01be19888ae5523b8f8eaefa7b3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5362
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Removing FlushPipe fault, using SquashAfter

This Patch is removing the FlushPipe ArmFault, which was used for
flushing the pipeline in favour of the general IsSquashAfter StaticInstr
flag. Using a fault was preventing tracers from tracing barriers like
ISB and from adding them to the instruction count

Change-Id: I176e9254eca904694f2f611eb486c55e50ec61ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5361
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arm: Add support for armv8 CRC32 instructions

This patch introduces the ARM A32/T32/A64 CRC Instructions, which are
mandatory since ARMv8.1. The UNPREDICTABLE behaviours are implemented as
follows:
1) CRC32(C)X (64 bit) instructions are decoded as Undefined in Aarch32
2) The instructions support predication in Aarch32
3) Using R15(PC) as source/dest operand is permitted in Aarch32

Change-Id: Iaf29b05874e1370c7615da79a07f111ded17b6cc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5521
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

util: Remove support for hg patches in patch creation script

Simplify the patch creation helper script by removing support for
automatic conversion to Mercurial's patch format. We no longer use
Mercurial as a primary repository, so this support is not likely to be
needed again.

Change-Id: I83f6efb9ccaee9c548b33257a4d6128153750c76
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5162
Reviewed-by: Gabe Black <gabeblack@google.com>

util: Optionally search entire history when listing changes

The helper script to list changes currently only looks at the changes
between a branch point and two heads. This helps performance, but
sometimes misclassifies changes that exist both in the upstream
branch before the branch point and in a feature branch. Such changes
should normally not exist, but can be the product of an incorrect
rebase.

This change adds an option to the helper script to search the entire
upstream repo history when determining the set of upstream
changes. When this option is provided, the script lists the changes
that exist upstream before the branch point and in the feature branch
as "Incorrectly rebased changes".

Change-Id: I4cb72cea2152c49d0317dc43613be94a0a2de1e5
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5161

cpu, probe: Fix elastic trace register dependency

Change-Id: I017852eac183fac3f914fdb96d7e72a56ea9d682
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5121
Reviewed-by: Matthias Jung <jungma@eit.uni-kl.de>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Fix the "script" SysPath functor.

This particular functor looks in the config root, not in the path
specified by M5_ROOT like binary and disk.

Change-Id: Ib007c36934c65ca9f808e995a2e0c71f0b338788
Reviewed-on: https://gem5-review.googlesource.com/5641
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

config: Add an Energy param type.

This type expects values in joules (J).

Change-Id: I77a3a4f1c19443f573d5fe7a84d5abd954ce1603
Reviewed-on: https://gem5-review.googlesource.com/5625
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Export the "Current" param type from m5.params.

This type was defined, but it was never added to __all__.

Change-Id: I5414829a9562790416f5ceab71af01503d142903
Reviewed-on: https://gem5-review.googlesource.com/5624
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

util: Add a "toEnergy" function to the convert module.

Change-Id: I7299af0e2a6ce9bd2272d6ccb898997336e95e51
Reviewed-on: https://gem5-review.googlesource.com/5623
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Simplify the definitions of the Voltage and Current params.

These had a lot of code which duplicated what was already in the
Float param value class. Also, printing into the ini file with "%f"
forces python to truncate values which require more precision than the
fixed float format supports.

Change-Id: Iad9623b71a31d17b69c184082585dcbb881eaa20
Reviewed-on: https://gem5-review.googlesource.com/5622
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Interface for the ArmStaticInst intWidth field

ARMv8 Tracers might want to be able to read the intWidth field of the
ArmStaticInst object. The field is specifying the bit width of the
integer registers used by the current instruction.

Change-Id: Iaee3123823a2c7380917001c453377c1c12e54a7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5661
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Corrected encoding for T32 HVC instruction

This patch corrects the encoding of the HVC (Hypervisor Call) for the
T32 instruction set.

Change-Id: I6f77eaf5c586697e9ccd588419c61e6d90c6c7bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chuan Zhu <chuan.zhu@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5541
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util: Simplify/consolidate the python conversion module.

The python conversion module was really repetitive and fragmented,
where some types of conversions use common code, and some use hand
written case statements which did something very similar. Also, some
types like Voltage could only handle V and mV but no other scaling
prefix.

This change restructures the module to centralize a lot of the unit
handling code into toFloat, and makes the various other functions use
it.

Change-Id: Ic8529203cc226c9b551b8535a444e3f2f25ad1eb
Reviewed-on: https://gem5-review.googlesource.com/5621
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: Move Transform and termcap functionality into their own files.

Change-Id: Ica08e93f3873a7eafd02fe7d44c3bdbf0ce7f6b7
Reviewed-on: https://gem5-review.googlesource.com/5565
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Move python path management out of the SConstruct.

Make site_init.py manage sys.path, and the "default" tool set
PYTHONPATH on any environment that's created. The paths to add are
tracked in a common gem5_python_paths.py.

Change-Id: I3387d4394d47a2f9c83322644cfd05909c6890fa
Reviewed-on: https://gem5-review.googlesource.com/5564
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Pull style hook management out of the main SConstruct.

Put the code which supports style hooks for mercurial and git into two
scons "tools".

Change-Id: I3ffed85a177be4f9e458fff7b1cf16a3a479914e
Reviewed-on: https://gem5-review.googlesource.com/5563
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Override the "default" tool to set up the default env.

This imports various environment variables into the scons environment,
and sets some general properties on it. These are basically just copied
directly from the SConstruct and have the same behavior here.

gem5_tool_list will be used later on to add scons "tools" which should
be automatically added to new Environment objects.

Change-Id: Ib255955090c7b1e1cb80c703c18a9c867fcf1c9e
Reviewed-on: https://gem5-review.googlesource.com/5562
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Move scons and python version checking into site_init.py.

In an effort to shrink and modularize the main scons files, this
change pulls the scons and python version checking code out of the
main file and into site_init.py which runs before the SConstruct
starts. This will be a place to put really generic code which has to
do with the very fundemental aspects of getting scons to work. Other
checks, like checks for particular tools or particular versions of
tools, will happen in other more specialized files.

Change-Id: Icd00ecadbe1141aef4dbadcf42d6ddef1f3a701f
Reviewed-on: https://gem5-review.googlesource.com/5561
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem: Align the snoop behavior in the XBar for atomic and timing

When the XBar receives a Writeback/WriteClean packet, it doesn't need
to snoop the upstream caches. It only queries the snoop filter and
sets the blockCached flag accordingly. This is in line with the
recvTimingReq.

Change-Id: I0ae22f21491d75a111019124bb95bac7b16d3cd3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5043
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch-arm: Allow dc ivac from EL0 when SCTLR_EL1.UCI=1

A program running in EL0 is allowed to execute CMOs when the UCI bit
in SCTLR is set. The execution of dc ivac, however, would fault
uncoditionally when executed from EL0. This change aligns the
permission checks for dc ivac with the rest of the CMOs.

Change-Id: I1a532f37707c7dc0748b4375252c6ec0bbf95419
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5058
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Move generic serial devices to src/dev/serial

Change-Id: I104227fc460f8b561e7375b329a541c1fce881b2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4291
Reviewed-by: Gabe Black <gabeblack@google.com>

dev: Add a dummy serial device

Add a dummy serial device that discards any output and doesn't provide
any input. This device can be used to terminate UARTs that don't have
a default device (e.g., a terminal) attached.

Change-Id: I4a6b0b5037ce360f59bfb5c566e1698d113a1d26
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4290
Reviewed-by: Gabe Black <gabeblack@google.com>

dev: Refactor UART->Terminal interface

The UART models currently assume that they are always wired to a
terminal. While true at the moment, this isn't necessarily a valid
assumption. This change introduces the SerialDevice class that defines
the interface for serial devices. Currently, Terminal is the only
class that implements this interface.

Change-Id: I74fefafbbaf5ac1ec0d4ec0b5a0f4b246fdad305
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4289
Reviewed-by: Gabe Black <gabeblack@google.com>

alpha,arm,mips,power,riscv,sparc,x86: Merge exec decl templates.

In the ISA instruction definitions, some classes were declared with
execute, etc., functions outside of the main template because they
had CPU specific signatures and would need to be duplicated with
each CPU plugged into them. Now that the instructions always just
use an ExecContext, there's no reason for those templates to be
separate. This change folds those templates together.

Change-Id: I13bda247d3d1cc07c0ea06968e48aa5b4aace7fa
Reviewed-on: https://gem5-review.googlesource.com/5401
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim-se: Add prlimit system call

Some ISAs (namely RISC-V) implement getrlimit and setrlimit using
prlimit. This patch adds an implementation for the prlimit system call.
Normally prlimit is supposed to provide the functionality of both
getrlimit and setrlimit, but because gem5 does not support setrlimit
this implementation of prlimit will simply display a warning and return
a failure code if the setrlimit mode is used. The same thing will happen
if a pid other than 0 is passed to it.

Change-Id: I653af2d5a60e716f4d6286196be7600409efcef8
Reviewed-on: https://gem5-review.googlesource.com/5321
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

alpha,arm,mips,power,riscv,sparc,x86,isa: De-specialize ExecContexts.

The ISA parser used to generate different copies of exec functions
for each exec context class a particular CPU wanted to use. That's
since been changed so that those functions take a pointer to the base
ExecContext, so the code which would generate those extra functions
can be removed, and some functions which used to be templated on an
ExecContext subclass can be untemplated, or minimally less templated.

Now that some functions aren't going to be instantiated multiple times
with different signatures, there are also opportunities to collapse
templates and make many instruction definitions simpler within the
parser. Since those changes will be less mechanical, they're left for
later changes and will probably be done in smaller increments.

Change-Id: I0015307bb02dfb9c60380b56d2a820f12169ebea
Reviewed-on: https://gem5-review.googlesource.com/5381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

config: Rework the SysPaths functions into functors.

These functions were already being treated as psuedo objects and had
properties assigned to them setting what their paths were. That's a bit
unusual and made it less obvious what the code was doing, but also
forced the "system" function to know what all the possible path
searching functions were so that they'd have their "path" property
initialized properly in a central location.

This change introduces a PathSearcFunc class which encapsulates the
mechanisms of the old code and makes it implicitly extensible so that
other path searching functions which might look in other directories
can be added in other places.

Change-Id: I7be28e51481a06ec83997677af99927709b18003
Reviewed-on: https://gem5-review.googlesource.com/5341
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Using Configurable image writer in HDLcd

The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device.  Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.

Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

vnc: Default image writer type set to Auto

This commit modifies the default behaviour of the vnc frame dumping
process: rather than using 'Bitmap' as a default parameter value, it is
using 'Auto'.  Auto parameter is letting gem5 to choose the most
efficient image format among the available ones.

Change-Id: I3c8e2b5a34a5925d24892880ac362dfe38de36e3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5182
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

base: Introducing utility for writing raw data in png format

Originally it was possible to use a Bitmap writer class for dumping a
framebuffer snapshot in a .bmp file. This patch enables you to choose
another format.  In particular it implements the writing of PNG Images
using libpng library.  The latter has to be already installed in your
machine, otherwise gem5 will default to the Bitmap format.  This
configurable writer has been introduced in the VNC frame dumping mechanism,
which is storing changed frame buffers from the VNC server

Change-Id: Id7e5763c82235f1ce90381c8486b85a7cce734ce
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5181
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

x86: Fix VEX instruction decoding.

When decoding VEX prefixed instructions, the x86 predecoder wasn't walking
past the opcode byte and so was also interpreting it as the modRM byte.

Reported-by: likunxi@fas.harvard.edu
Change-Id: I6d4bdabfa03411704c48d905c50c7b23072fc615
Reviewed-on: https://gem5-review.googlesource.com/5281
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

base: Fix forcing loopback only binding for listeners.

Despite online documentation, the type used for sin_addr.s_addr is not
actually an unsigned long, it is an in_addr_t. When an unsigned long is a 64
bit value, the endian conversion moves the relevant bits of the 32 bit
in_addr_t to positions which are truncated away. This forces the value to 0
which means to bind to any interface, the opposite of the intended effect.

Change-Id: I53c63dea6bd88144dfef1a9a49b478fab30a8ba2
Reviewed-on: https://gem5-review.googlesource.com/5301
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: RBIT instruction using mirroring func

The high speed bit-reversing function is now used
for the Aarch64/32 RBIT instruction implementation.

Change-Id: Id5a8a93d928d00fd33ec4061fbb586b8420a1c1b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5262
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>