git.libre-soc.org Git - buildroot.git/log

package/e2fsprogs: add host-package selection

Add the e2fsprogs as a host-package selection in the menuconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

host util-linux: disable login and su since they depend on PAM

This fixes the following errors when building util-linux v2.22.2 for
the host in case the PAM headers are missing:

configure: error: login selected, but required PAM header file not available
configure: error: su selected, but required PAM header file not available

Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pkg-autotools.mk: remove extra space from config-update message

If you do a "make -s", you will notice that the UPDATE_CONFIG_HOOK message
has an extra space compared to other highlighted messages. For example:

>>> util-linux 2.20.1 Updating config.sub and config.guess
>>> util-linux 2.20.1 Patching libtool
>>> util-linux 2.20.1 Autoreconfiguring

A grep shows this is the only instance of the extra space. This patch
removes the extra space.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

new package: redis

[Peter: fix white space, drop _SOURCE]
Signed-off-by: Daniel Price <daniel.price@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Install libfribidi to staging

Install libfribi to staging to be able to link against it.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

oprofile: upstep 0.9.7 patches to 0.9.8

The patches to oprofile 0.9.7 seem still relevant for 0.9.8, but for some
reason they were not upstepped.

[Peter: drop version number from patch filenames]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libpfm4: new package

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gpsd: add upstream patches

Add a couple of patches submitted by Mike Frysinger to gpsd upstream. One of
these patches (that for the gpsd/dbus interface) fixes autobuild failures
such as the following.

http://autobuild.buildroot.net/results/41ccc838c5d44ab237a7195767940585bbb8b1f6

Note that neither of these patches has yet been accepted upstream.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

json-glib: new package

JSON-GLib is a library providing serialization and deserialization
support for the JavaScript Object Notation (JSON) format described by
RFC 4627.

https://live.gnome.org/JsonGlib/

[Peter: add license info, tweak help text]
Signed-off-by: Henrique Camargo <henrique@henriquecamargo.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Added lcms2 package

Little CMS intends to be an OPEN SOURCE small-footprint color management
engine, with special focus on accuracy and performance.

[Peter: tweak help text, fix white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Mark AArch64 as a 64 bits architecture

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

zeromq: require IPv6 support in toolchain

The zeromq package was recently bumped from version 2.2.0 to version 3.2.2,
which has introduced a requirement for IPv6 support in the toolchain. At
present, IPv6 support is mandatory in zeromq: there is no configuration option
to enable/disable the feature.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl: use <pkg>_CONFIG_SCRIPTS for sdl-config

Use the <pkg>_CONFIG_SCRIPTS mechanism to handle the sdl-config
script, so that it properly gets removed from the target. However, we
can't completely remove the manual fixup, because it also takes care
of removing the -Wl,-rpath option, which the general
<pkg>_CONFIG_SCRIPTS doesn't do.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

urg: handle config scripts properly

urg installs two <foo>-config scripts, so the ones installed in
$(STAGING_DIR) should be fixed up, and the ones installed in
$(TARGET_DIR) should be removed. Use the <pkg>_CONFIG_SCRIPTS
infrastructure to do this.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

urg: fix license

The urg.mk file mentions a LGPLv3+ license. However, none of the
source code in the urg package carries a copyright notice that
indicates the "v3 or later". The only license information we have is
the COPYING file, that contains the text of the LGPLv3
license. Therefore, we should probably assume that the code is under
LGPLv3 only.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nodejs: new package

Based off of patches posted by (and Signed-off-by:) Jonathan Liu <net147@gmail.com>

[Peter: fix Config.in whitespace]
Signed-off-by: Daniel Price <daniel.price@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New package: gtest

Google's framework for writing C++ tests on a variety of platforms (Linux,
Mac OS X, Windows, Cygwin, Windows CE, and Symbian). Based on the xUnit
architecture. Supports automatic test discovery, a rich set of assertions,
user-defined assertions, death tests, fatal and non-fatal failures, value-
and type-parameterized tests, various options for running the tests, and XML
test report generation.

Gtest also allows to easily build testsuites for C programs.

This package allows running testsuites on the target which might be
advantgeous in certain cases.

http://code.google.com/p/googletest/

[Peter: Tweak Config.in, use GTEST_VERSION in _SOURCE]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

urg: new package

[Peter: drop 'library' from name]
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

zeromq: add PGM/EPGM support

This adds support for Pragmatic General Multicast protocol on raw
IP (PGM, RFC 3208) or UDP frames (EPGM) for use as zeromq reliable
multicast transport. The library relies on openpgm package to
implement the protocol itself.

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openpgm: new package

OpenPGM is an open source implementation of the Pragmatic General
Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
It is required for PGM/EPGM support in ZeroMQ library.

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

zeromq: bump version to 3.2.2

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

<pkg>-rsync: exclude version control files

When using rsync to import package sources (typically with
PKG_OVERRIDE_SRCDIR), it often happens that these external sources
are under version control, and contain directories like .git,
.hg, etc.

Depending on the project, these directories can become pretty large
and typically have a lot of files. Moreover, they are not necessary
in the context of building the package. Therefore, this commit adds
the --cvs-exclude option to the rsync call, saving both disk space
and sync time.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

perl: bump to version 5.16.3

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: bump 3.8.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 2, 4, 8}.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: Add a load address option for building uImage on 3.7+ multi-platform kernels

[Peter: add quotes as suggested by Arnout]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ussp-push: new package

Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openobex: new package

Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fs/common.mk: Strip extra whitespace when device table is empty

Since ROOTFS_DEVICE_TABLES is a concatenation of two strings separated by
spaces, there will always be a space in it, which means it's never empty.
Therefore, when testing for empty, the condition never evaluate to false.

The following change fixes this problem; it runs qstrip on the overall
combination of the variables, causing the space to be removed if it's the
only thing left.

Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

poco: bump to 1.4.6p1

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

poco: needs threads

Fixes
http://autobuild.buildroot.net/results/98f8ae541939bd7b44601d3ee039bbc84becea84.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: add 2013.03.0, remove 2012.11

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libv4l: depends on jpeg so must select it

Fixes http://autobuild.buildroot.net/results/3053854fccd65bc5b28384f2a2039a33abeeea47

The introduction of the error message for the jpeg virtual package exposes
this kind of error.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

eeprog.mk: fix site

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: fix upstream URL

AT91Bootstrap 1.x seems to have disappeared from atmel.com (but return
HTML instead of a 404), so use the at91.com FTP server instead.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lcdproc: needs MMU

Fixes:
http://autobuild.buildroot.org/results/58d0231cc39ee6be3064906f07307b438ea4c30b

Also fixed some indentation issues

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/tzdata: new package

This is the time zone database, used by glibc for translations between
UTC and local time.

Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: use global ZIC, install posix TZ only once]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/zic: new host package

This is the zone information compiler, used to compile the time zone
database.

Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: export ZIC for all to use]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

icu: speed up host build

The host build of icu doesn't need to build everything, so we can add
a few more --disable-<foo> options to save a little bit of build time.

On a fast build server, this bring the host icu build from 2m28.517s
to 2m5.192s.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

icu: don't build object files twice

When passed --enable-static and --enable-shared, icu will generate
both a shared and a static version of its libraries.

However, in order to do so, it builds each and every object file
twice: once with -fPIC (for the shared library), and once without
-fPIC (for the static library). While admittedly building -fPIC for a
static library generates a slightly suboptimal code, this is what all
the autotools-based project are doing. They build each object file
once, and they use it for both the static and shared libraries.

icu builds the object files for the shared library as .o files, and
the object files for static library as .ao files. By simply changing
the suffix of object files used for static libraries to ".o", we tell
icu to use the ones built for the shared library (i.e, with -fPIC),
and avoid the double build of icu.

On a fast build server, this brings the target icu build from
3m41.302s down to 1m43.926s (approximate numbers: some other builds
are running on the system at the same time).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

icu: workaround toolchain bugs

Many of ARM Sourcery CodeBench toolchain have a bug when compiling
icu's translit.cpp source file. The bug is trigerred when there is a
combination of "-W -Wall" and "-Os", and causes an internal compiler
error. The bug has been reported to Mentor Graphics.

Even though it is clearly a toolchain bug, having a workaround for it
is trivial in this case. So it will avoid our users falling into this
internal compiler error, and allow our autobuilders to test more
packages using this Sourcery CodeBench toolchain.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

flot: add fillbetween plugin

Flot plugin for computing bottoms for filled line and bar charts.

[Peter: fixup help text]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/mdadm: add license information

Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/mdadm: update to v3.2.6

Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt5base: support debug or release modes

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt5base: add GUI support

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt5base: new package

This is the beginning of the Qt5 packaging. This commit allows to
build only the qtbase module, which contains QtCore, QtNetwork, QtXml,
QtTest, QtSql and QtConcurrent.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt5: add macro to fixup Qt5 .la and .prl files

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt5: base infrastructure

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: factorize the BR2_PACKAGE_GPTFDISK dependency

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: add support for building and install cgdisk

In addition to the command-line tool gdisk and the interactive tool
sgdisk, gptfdisk also provides a ncurses based tool, cgdisk. This
commit adds support for building and installing this tool.

[Peter: Update gdisk autoselection logic to consider cgdisk as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: make utf16 support configurable

Instead of always disabling the UTF16 support, make it
configurable. When ICU is available, enable UTF16 support, otherwise
disable it.

[Peter: wrap long line]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: fix installation step

The installation step was not giving the full destination path even
though it was using -D, and it was forgetting to explicitly specify
the permissions of the file to install. This commit fixes both of
these minor issues.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: use TARGET_CONFIGURE_OPTS properly, use TARGET_MAKE_ENV

$(TARGET_CONFIGURE_OPTS) should be passed as $(MAKE) argument, not in
the environment. We can then remove the redefined CC and LD variables
that were useless. We also take this opportunity to pass
$(TARGET_MAKE_ENV) in the environment of make.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gptfdisk: ensure that the package always builds/installs something

Until now, selecting just the gptfdisk package wouldn't do anything.
It wouldn't build anything at all, and wouldn't install anything.
This is rather odd.

So now, we ensure that at least one of the two tools that gptfdisk can
build and install is selected. This allows use to factorize a bit the
select of util-linux in Config.in, and remove the if condition in the
makefile that was preventing the package from being built if no tools
was selected.

[Peter: Reword commit text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdisk: rename to gptfdisk

In order to match the new upstream name, rename the gdisk package to
gptfdisk. We add the relevant legacy configuration options to ensure a
smooth transition for users.

[Peter: fixup Config.in indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdisk: Update gdisk (gptfdisk) to version 0.8.6

[Thomas Petazzoni: bump to 0.8.6 and not 0.8.5]

Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CMake packages: remove .cmake files from target directory

Just like pkgconfig files.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cmake: bump to 2.8.10.2

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cmake: remove target package macro

The dummy target package is not needed anymore since commit 79bfcd556027901.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cmake: convert spaces to tabs in make rules

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

jpeg: convert to a real package

jpeg is a virtual package, but since it is listed in the dependencies
of other packages, it should obey to all the normal make rules for
packages. Notably, the jpeg-show-depends target is mandatory for the
graph-depends script to work.

Instead to implement such a make target manually, make jpeg a normal
generic-package, except that it doesn't have any source.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

efl/libeet, efl/libevas: use host-libjpeg instead of host-jpeg

Before creating a real virtual package named 'jpeg', we want to ensure
that no package is using the host variant of the virtual
package. Instead, we make them use directly the host-libjpeg package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpi-userland: add bcm_host to egl.pc

bcm_host is the Broadcom hardware interface library
And is currently a dependency to use the EGL functions

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpi-userland: add .pc files for OpenGLESv2 and EGL libs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

packages/flex: remove unnecessary BR2_PACKAGE_FLEX_LIBFL

The BR2_PACKAGE_FLEX_LIBFL knob was removed by
bd72a13a4ca3033bacbaf9e9a2b424acf149f83d so remove it from the packages
that used it since it's completely unnecessary.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

util-linux: bump version and revamp options

Bump to latest 2.22.2 version and revamp available options.

* Remove the assumed enable/disable defaults since these seem to change
quite often, so do what's wise and always enable/disable things.

* Switch from build "X" menu options to just X, add some help and sort.

* Introduce new option to install binaries (or not) to reduce bloat for
packages that just need libblkid and/or libuuid.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

wireshark: security bump to version 1.8.6

Fixes CVE-2013-2475, CVE-2013-2476, CVE-2013-2477, CVE-2013-2478,
CVE-2013-2479, CVE-2013-2480, CVE-2013-2481, CVE-2013-2482,
CVE-2013-2483, CVE-2013-2484, CVE-2013-2485, CVE-2013-2486,
CVE-2013-2487, and CVE-2013-2488.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/tvheadend: fix startup script

Obvious fix to the startup script: 'restart' is 'stop+start',
not 'stop+stop'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ser2net: bump to version 2.8

Bump ser2net to version 2.8.

Exclude for nommu (uses fork).
Version 2.7 also did, guess the autobuilders never caught it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gettext: bump to version 0.18.2.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libglib2: use system pcre when available

By default, glib builds its own internal copy of the pcre library, but
it also allows to use the one available from the system. Use this
possibility when pcre is already selected in the Buildroot
configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libglib2: don't build tests

Add a patch that provides an additional --disable-tests option to the
configure script.

Disabling the build of tests has two benefits:
* Prevents the build of a lot of code that doesn't build on noMMU
platforms.
* Reduces the build time.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

alsa-lib: fix noMMU build

Add a patch to use vfork() instead of fork().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

aircrack-ng: disable on non-MMU systems

aircrack-ng uses fork() and therefore fails to build on non-MMU
systems:

aircrack-ng.o: In function `_clean_exit':
aircrack-ng.c:(.text+0x555c): undefined reference to `_fork'
collect2: ld returned 1 exit status

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pcre: always enable the 8-bits version

Commit 7154798a461a8b2c (pcre: add support for 16 bits and 32 bits
variants), added in preparation to the introduction of the Qt5
packages, could break other packages that use pcre.

Even though by default the pcre 8 bits library is selected if no other
variant is selected, a randpackageconfig, or an user, could
potentially enable the 16 bits variant even if a package requires the
8 bits variant.

This has caused a number of build breakage on packages like ngrep,
cegui, nmap and others in the autobuilders.

In older to solve this, we simply unconditionally build the 8-bits
variant. Since each variant is only ~90k in size, it's probably not
worth the effort giving the possibility of building the 16 bits
variant only.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11r7/xcb-util-image: new package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11r7/xcb-util-wm: new package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xcb-util: add dependency on libxcb

The xcb-util lacks a dependency on libxcb. Without this dependency, it
fails to build with:

checking for XCB... no
configure: error: in `/home/thomas/projets/buildroot/output/build/xcb-util-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.

Alternatively, you may set the environment variables XCB_CFLAGS
and XCB_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

autoconf: don't try to build Emacs files

When building autoconf for the target, we already passed EMACS="no" to
prevent autoconf from building Emacs mode files. But we weren't doing
that when building autoconf for the host. This causes problems when
'emacs' is not really emacs, but a sort of clone like Jove. So we also
pass EMACS="no" when building host-autoconf to avoid autoconf
./configure script from detecting emacs and then use it to build .elc
files from .el source code.

Reported-by: Spielmann Werner <Werner.Spielmann@swarovski.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

rpi-userland: provides OpenGL ES, EGL and OpenVG

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package: create virtual package for libGLES, libOpenVG and libEGL

Those acceleration libraries typically have multiple implementations:
some are free (Mesa), some are proprietary (generally SoC specific).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

x11r7/xcb-util: bump to 0.3.9

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pcre: add support for 16 bits and 32 bits variants

Until now, we have been building only the 8bits PCRE variant. However,
Qt5 requires the 16bits variant. This commit therefore adds support to
build the 16bits and 32bits variants of PCRE. In order to preserve
backward compatibility, the 8bits variant is automatically chosen if
no specific variant is defined.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

graph-depends: ignore the 'target-post-image' target

Since the introduction of the post-image mechanism, the graph-depends
script is broken: it tries to call 'make
target-post-image-show-depends', which doesn't exist since
'target-post-image' is not a package.

So we should simply ignore this 'target-post-image'.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

json-c: Add json_object_iterator.h to installed headers

json_object_iterator.h is not installed in staging directory.
This leads to an error during pulseaudio build process:

fatal error: json_object_iterator.h: No such file or directory

Fixes autobuild failures like:
http://autobuild.buildroot.org/results/079f9265cd768f88ad57f6f7b794641c845f3079

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

htop: needs MMU

Fixes:
http://autobuild.buildroot.org/results/023b40f48c8006cd49c585efae3cfa065b21bf51

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

new package: libtasn1

Libtasn1 is the ASN.1 library used by GnuTLS, GNU Shishi and some
other packages. It was written by Fabio Fiorina, and has been
shipped as part of GnuTLS for some time but is now a proper
GNU package.

[Peter: Both licenses are '+']
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

aircrack-ng: new package

Aircrack-ng is a set of tools for auditing wireless security.

[Peter: mention that iw is a runtime dependency, use MAKE1]
Signed-off-by: Laurent Cans <laurent.cans@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ncurses: speed up host build

Disable C++ and Ada bindings in host-ncurses, since those are not
needed. Save 9 seconds of build time on my laptop.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ncurses: speed up the build by not installing manpages

The installation of manpages during the installation step of
host-ncurses and ncurses is horribly slow, and useless. This commit
therefore disables the installation of those manpages, using the
--without-manpages configuration option.

It brings the combined host-ncurses+ncurses configure/build/install
time from 3 minutes and 18 seconds to 1 minute and 36 seconds.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iptables: bump to version 1.4.18

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

conntrack-tools: bump to version 1.4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ulogd: bump to version 2.0.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nfacct: bump to version 1.0.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnetfilter_acct: bump to version 1.0.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnetfilter_conntrack: bump to version 1.0.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

stress: honor the BR2_PREFER_STATIC_LIB preference

Stress is linked statically if the --enable-static is specified.
However, this option is always specified in the global
SHARED_STATIC_LIBS_OPTS to tell packages to build static libraries,
if supported.

If the BR2_PREFER_STATIC_LIB is not defined, we have to specify
--disable-static explicitly to get stress linked dynamically.

Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>