mesa.git
13 years ago[g3dvl] no need for individual samplers for idct stage 1 & 2
Christian König [Sun, 27 Mar 2011 00:53:04 +0000 (01:53 +0100)]
[g3dvl] no need for individual samplers for idct stage 1 & 2

13 years ago[g3dvl] cleanup and improve idct error handling
Christian König [Sun, 27 Mar 2011 00:41:10 +0000 (01:41 +0100)]
[g3dvl] cleanup and improve idct error handling

13 years ago[g3dvl] improve and cleanup mc error handling
Christian König [Sun, 27 Mar 2011 00:04:00 +0000 (01:04 +0100)]
[g3dvl] improve and cleanup mc error handling

13 years ago[g3dvl] remove unused backbuffer from xvmc
Christian König [Sat, 26 Mar 2011 23:19:25 +0000 (00:19 +0100)]
[g3dvl] remove unused backbuffer from xvmc

13 years ago[g3dvl] fully implement paletted subpictures
Christian König [Sat, 26 Mar 2011 11:36:01 +0000 (12:36 +0100)]
[g3dvl] fully implement paletted subpictures

13 years ago[g3dvl] correct subpicture stride in upload
Christian König [Sat, 26 Mar 2011 10:53:27 +0000 (11:53 +0100)]
[g3dvl] correct subpicture stride in upload

13 years ago[g3dvl] start implementing palettes for subpictures
Christian König [Sat, 26 Mar 2011 10:46:07 +0000 (11:46 +0100)]
[g3dvl] start implementing palettes for subpictures

13 years ago[g3dvl] get sampler swizzle right for subpictures
Christian König [Sat, 26 Mar 2011 09:58:38 +0000 (10:58 +0100)]
[g3dvl] get sampler swizzle right for subpictures

This should make ai44 work correctly.

13 years ago[g3dvl] add blend state to compositor
Christian König [Sat, 26 Mar 2011 01:03:16 +0000 (02:03 +0100)]
[g3dvl] add blend state to compositor

This seems to get at least mplayer working

13 years ago[g3dvl] correct layer size calculation
Christian König [Sat, 26 Mar 2011 00:26:52 +0000 (01:26 +0100)]
[g3dvl] correct layer size calculation

13 years ago[g3dvl] use quads instead of triangles for the compositor
Christian König [Sat, 26 Mar 2011 00:01:18 +0000 (01:01 +0100)]
[g3dvl] use quads instead of triangles for the compositor

13 years ago[g3dvl] the sampler textview map is no longer needed
Christian König [Fri, 25 Mar 2011 23:30:22 +0000 (00:30 +0100)]
[g3dvl] the sampler textview map is no longer needed

13 years ago[g3dvl] throw out all unused parts of the interface
Christian König [Fri, 25 Mar 2011 23:20:16 +0000 (00:20 +0100)]
[g3dvl] throw out all unused parts of the interface

13 years ago[g3dvl] rework supicture handling
Christian König [Fri, 25 Mar 2011 22:38:50 +0000 (23:38 +0100)]
[g3dvl] rework supicture handling

This gets ia44 and ai44 at least partial working

13 years ago[g3dvl] start implementing AI44 and IA44 subpicture
Christian König [Fri, 25 Mar 2011 20:10:56 +0000 (21:10 +0100)]
[g3dvl] start implementing AI44 and IA44 subpicture

13 years ago[g3dvl] make ref_surface handling more sane
Christian König [Fri, 25 Mar 2011 18:32:22 +0000 (19:32 +0100)]
[g3dvl] make ref_surface handling more sane

13 years ago[g3dvl] move sampler views for reference frames into context
Christian König [Thu, 24 Mar 2011 20:24:58 +0000 (21:24 +0100)]
[g3dvl] move sampler views for reference frames into context

13 years ago[g3dvl] make mapping and flushing of buffers a public interface
Christian König [Thu, 24 Mar 2011 19:33:32 +0000 (20:33 +0100)]
[g3dvl] make mapping and flushing of buffers a public interface

13 years ago[g3dvl] fix configure.ac for r600 video targets
Christian König [Tue, 22 Mar 2011 20:58:28 +0000 (21:58 +0100)]
[g3dvl] fix configure.ac for r600 video targets

13 years ago[g3dvl] buffers must be aligned to macroblock size
Christian König [Tue, 22 Mar 2011 20:52:06 +0000 (21:52 +0100)]
[g3dvl] buffers must be aligned to macroblock size

13 years ago[g3dvl] make video buffer a public available interface
Christian König [Tue, 22 Mar 2011 18:58:21 +0000 (19:58 +0100)]
[g3dvl] make video buffer a public available interface

13 years ago[g3dvl] handle different mc types more similary
Christian König [Sun, 20 Mar 2011 21:50:09 +0000 (22:50 +0100)]
[g3dvl] handle different mc types more similary

13 years ago[g3dvl] simplify motion vector calculation
Christian König [Sun, 20 Mar 2011 21:14:49 +0000 (22:14 +0100)]
[g3dvl] simplify motion vector calculation

13 years ago[g3dvl] rename motion vector fields
Christian König [Sun, 20 Mar 2011 20:34:38 +0000 (21:34 +0100)]
[g3dvl] rename motion vector fields

13 years ago[g3dvl] correctly implement non power of two buffers
Christian König [Sun, 20 Mar 2011 18:45:06 +0000 (19:45 +0100)]
[g3dvl] correctly implement non power of two buffers

13 years ago[g3dvl] cleanup idct init
Christian König [Sun, 20 Mar 2011 18:29:47 +0000 (19:29 +0100)]
[g3dvl] cleanup idct init

13 years ago[g3dvl] fix power_of_two buffer with/height handling
Christian König [Sun, 20 Mar 2011 18:00:50 +0000 (19:00 +0100)]
[g3dvl] fix power_of_two buffer with/height handling

13 years ago[g3dvl] merge fixes
Christian König [Sat, 19 Mar 2011 11:26:17 +0000 (12:26 +0100)]
[g3dvl] merge fixes

13 years agor600g: revert some asm optimisations
Christian König [Sat, 19 Mar 2011 10:40:22 +0000 (11:40 +0100)]
r600g: revert some asm optimisations

They didn't have the desired effect and are still quite buggy

13 years agoMerge remote branch 'origin/master' into pipe-video
Christian König [Sat, 19 Mar 2011 00:02:40 +0000 (01:02 +0100)]
Merge remote branch 'origin/master' into pipe-video

Conflicts:
src/gallium/drivers/r600/r600_asm.c
src/gallium/tests/unit/SConscript

13 years agovdpau: add vdpau-r600 target
Christian König [Fri, 18 Mar 2011 20:44:47 +0000 (21:44 +0100)]
vdpau: add vdpau-r600 target

13 years agovdpau: fix formating and idention of surface.c
Christian König [Fri, 18 Mar 2011 20:12:08 +0000 (21:12 +0100)]
vdpau: fix formating and idention of surface.c

13 years agoget softpipe winsys to compile again
Christian König [Fri, 18 Mar 2011 18:34:02 +0000 (19:34 +0100)]
get softpipe winsys to compile again

13 years agovdpau: make indention and formating more sane
Christian König [Fri, 18 Mar 2011 00:06:41 +0000 (01:06 +0100)]
vdpau: make indention and formating more sane

13 years agovdpau: merge fixes for vdpau state tracker
Christian König [Thu, 17 Mar 2011 23:26:34 +0000 (00:26 +0100)]
vdpau: merge fixes for vdpau state tracker

13 years agofix chroma swizzle
Christian König [Thu, 17 Mar 2011 21:18:05 +0000 (22:18 +0100)]
fix chroma swizzle

13 years agomove empty block mask into mpeg12 context
Christian König [Thu, 17 Mar 2011 19:13:51 +0000 (20:13 +0100)]
move empty block mask into mpeg12 context

13 years agonouveau: Fix serious compiler warnings
Johannes Obermayr [Fri, 18 Mar 2011 18:10:07 +0000 (12:10 -0600)]
nouveau: Fix serious compiler warnings

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=35025

Signed-off-by: Brian Paul <brianp@vmware.com>
13 years agomesa: minor improvements in glTexEnvfv()
Brian Paul [Fri, 18 Mar 2011 02:31:58 +0000 (20:31 -0600)]
mesa: minor improvements in glTexEnvfv()

13 years agomesa: only report up to 50 _mesa_problem() calls
Brian Paul [Fri, 18 Mar 2011 02:31:58 +0000 (20:31 -0600)]
mesa: only report up to 50 _mesa_problem() calls

http://bugs.freedesktop.org/show_bug.cgi?id=35200 reports a disk
partition getting filled because of warning messages.  Stop emitting
after 50.

13 years agoswrast: report data type in error message
Brian Paul [Fri, 18 Mar 2011 02:31:58 +0000 (20:31 -0600)]
swrast: report data type in error message

13 years agomesa: Remove the CompileShader driver hook; it's just a no-op.
Kenneth Graunke [Sat, 26 Feb 2011 08:42:24 +0000 (00:42 -0800)]
mesa: Remove the CompileShader driver hook; it's just a no-op.

13 years agomesa: use _mesa_get_current_tex_unit() helper in BindTexture()
Brian Paul [Thu, 17 Mar 2011 03:13:31 +0000 (21:13 -0600)]
mesa: use _mesa_get_current_tex_unit() helper in BindTexture()

13 years agomesa: remove unneeded local var in BindTexture()
Brian Paul [Thu, 17 Mar 2011 03:13:31 +0000 (21:13 -0600)]
mesa: remove unneeded local var in BindTexture()

13 years agomesa: clean up the glBindTexture early out code a bit
Brian Paul [Thu, 17 Mar 2011 03:13:31 +0000 (21:13 -0600)]
mesa: clean up the glBindTexture early out code a bit

13 years ago[g3dvl] move mpeg12 context out of softpipe
Christian König [Wed, 16 Mar 2011 23:08:20 +0000 (00:08 +0100)]
[g3dvl] move mpeg12 context out of softpipe

13 years ago[g3dvl] cleanup and documentation
Christian König [Wed, 16 Mar 2011 22:09:52 +0000 (23:09 +0100)]
[g3dvl] cleanup and documentation

13 years agoi965: Rename brw_(IF|CONT)_gen6 functions to gen6_(IF|CONT).
Kenneth Graunke [Wed, 16 Mar 2011 07:00:09 +0000 (00:00 -0700)]
i965: Rename brw_(IF|CONT)_gen6 functions to gen6_(IF|CONT).

13 years agoautoconf: don't use CFLAGS for cpp files
Tobias Droste [Wed, 16 Mar 2011 17:45:29 +0000 (18:45 +0100)]
autoconf: don't use CFLAGS for cpp files

Signed-off-by: Tobias Droste <tdroste@gmx.de>
13 years agoi965: Rename BRW_DATAPORT_..._GEN6 messages to GEN6_... for consistency.
Kenneth Graunke [Wed, 16 Mar 2011 07:11:48 +0000 (00:11 -0700)]
i965: Rename BRW_DATAPORT_..._GEN6 messages to GEN6_... for consistency.

13 years agoi965: Rename BRW_SAMPLER_MESSAGE_..._GEN5 to GEN5_SAMPLER_MESSAGE.
Kenneth Graunke [Wed, 16 Mar 2011 07:06:59 +0000 (00:06 -0700)]
i965: Rename BRW_SAMPLER_MESSAGE_..._GEN5 to GEN5_SAMPLER_MESSAGE.

We already have lots of GEN6_* defines; this seems more consistent.

13 years agosvga: Leave any_user_vertex_buffers flag alone.
José Fonseca [Wed, 16 Mar 2011 15:46:21 +0000 (15:46 +0000)]
svga: Leave any_user_vertex_buffers flag alone.

It is pointless to change, now that we don't replace user vertex buffer
with uploaded copy, per commit 52e598d200108ab9cfc9c9d828bbebdc576e9703.

13 years agosvga: Hardcode SVGA_COMBINE_USERBUFFERS to 1.
José Fonseca [Wed, 16 Mar 2011 15:43:00 +0000 (15:43 +0000)]
svga: Hardcode SVGA_COMBINE_USERBUFFERS to 1.

The code no longer supports otherwise -- it relies on buffers being
uploaded via u_upload_mgr -- so make this clear.

Also, there's no need to flush after draws from user buffers, given all
user content should have been copied by then.

13 years agomesa: Sort extensions in extension string by year.
José Fonseca [Thu, 10 Mar 2011 14:39:08 +0000 (14:39 +0000)]
mesa: Sort extensions in extension string by year.

The years were obtained automatically by scraping the first year from
the spec text file.  They are approximate.

13 years agosvga: Use transfer information on buffer transfers.
José Fonseca [Wed, 16 Mar 2011 11:17:48 +0000 (11:17 +0000)]
svga: Use transfer information on buffer transfers.

Should prevent the assert failure

  svga_buffer_flush_mapped_range: Assertion `sbuf->map.writing' failed.

on nested transfers.

13 years agoglsl2: Silence unused added variable gcc warning.
José Fonseca [Wed, 16 Mar 2011 09:16:01 +0000 (09:16 +0000)]
glsl2: Silence unused added variable gcc warning.

13 years agomesa: Use typecast in BITFIELD64_BIT macro.
José Fonseca [Wed, 16 Mar 2011 09:15:30 +0000 (09:15 +0000)]
mesa: Use typecast in BITFIELD64_BIT macro.

Unsigned long is 32bit on several platforms (e.g., Windows), yielding
1UL << 32 to be zero.

Note that BITFIELD64_BIT result is often assigned to variables of type
GLbitfield, instead of GLbitfield64. That's probably wrong and should be
addressed in a later change.

13 years agomesa: use BITFIELD64_BIT() macro
Brian Paul [Tue, 15 Mar 2011 15:48:26 +0000 (09:48 -0600)]
mesa: use BITFIELD64_BIT() macro

13 years agost/mesa: use BITFIELD64_BIT() macro in a few more places
Brian Paul [Tue, 15 Mar 2011 15:48:08 +0000 (09:48 -0600)]
st/mesa: use BITFIELD64_BIT() macro in a few more places

13 years agoglsl: add cast to silence signed/unsigned comparison warning
Brian Paul [Tue, 15 Mar 2011 15:18:40 +0000 (09:18 -0600)]
glsl: add cast to silence signed/unsigned comparison warning

13 years agomesa: use 1UL for 64-bit unsigned constant for C++
Brian Paul [Tue, 15 Mar 2011 15:17:46 +0000 (09:17 -0600)]
mesa: use 1UL for 64-bit unsigned constant for C++

This fixes C++ warnings where BITFIELD64_BIT() is used.

13 years agoglsl: Only allow unsized array assignment in an initializer
Ian Romanick [Tue, 15 Mar 2011 23:33:27 +0000 (16:33 -0700)]
glsl: Only allow unsized array assignment in an initializer

It should have been a tip when the spec says "However, implicitly
sized arrays cannot be assigned to. Note, this is a rare case that
*initializers and assignments appear to have different semantics*."
(empahsis mine)

Fixes bugzilla #34367.

NOTE: This is a candidate for stable release branches.

13 years agoi915g: fix braino in the static state rework
Daniel Vetter [Tue, 15 Mar 2011 20:49:25 +0000 (21:49 +0100)]
i915g: fix braino in the static state rework

For mip-map level rendering, both draw offset and size tend to change ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
13 years agoi915g: implement early z
Daniel Vetter [Mon, 14 Mar 2011 21:13:01 +0000 (22:13 +0100)]
i915g: implement early z

v2: Make it actually work.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
13 years agoi915g: split up static state
Daniel Vetter [Tue, 15 Mar 2011 17:36:00 +0000 (18:36 +0100)]
i915g: split up static state

Early Z support is set in the DST_VARS command. Hence split up static
state emission to avoid reissuing to much on fragment shader changes,
especially the costly dst buffer relocations.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
13 years agoi965: Fix alpha testing when there is no color buffer in the FBO.
Eric Anholt [Sat, 12 Mar 2011 01:39:49 +0000 (17:39 -0800)]
i965: Fix alpha testing when there is no color buffer in the FBO.

We were alpha testing against an unwritten value, resulting in garbage.
(part of) Bug #35073.

13 years agoi965: Do our lowering passes before the loop of optimization.
Eric Anholt [Fri, 11 Mar 2011 22:50:17 +0000 (14:50 -0800)]
i965: Do our lowering passes before the loop of optimization.

The optimization loop won't reinsert noise instructions or quadop
vectors, so we were traversing the tree for nothing.  Lowering vector
indexing was in the loop after do_common_optimization() to avoid the
work if it ended up that the index was actually constant, but that has
been called already in the core.

13 years agoglsl: Skip processing the first function's body in do_dead_functions().
Eric Anholt [Fri, 11 Mar 2011 22:08:48 +0000 (14:08 -0800)]
glsl: Skip processing the first function's body in do_dead_functions().

It can't call anything, so there's no point.

13 years agoglsl: Whitespace fixup in opt_dead_functions.cpp.
Eric Anholt [Fri, 11 Mar 2011 22:02:46 +0000 (14:02 -0800)]
glsl: Whitespace fixup in opt_dead_functions.cpp.

13 years agoglsl: Skip processing of expression trees in discard simplification.
Eric Anholt [Fri, 11 Mar 2011 21:23:13 +0000 (13:23 -0800)]
glsl: Skip processing of expression trees in discard simplification.

It only cares about "if", "loop", and "discard".

13 years agoglsl: Reduce processing of expression trees in do_structure_splitting.
Eric Anholt [Fri, 11 Mar 2011 21:17:03 +0000 (13:17 -0800)]
glsl: Reduce processing of expression trees in do_structure_splitting.

Most of the time we don't have a non-uniform struct variable in the
shader, so this cuts the time spent in do_structure_splitting during
glean texCombine by about 2/3.

13 years agoglsl: Skip processing expression trees in do_if_simplification().
Eric Anholt [Fri, 11 Mar 2011 21:08:26 +0000 (13:08 -0800)]
glsl: Skip processing expression trees in do_if_simplification().

Reduces time spent in this during glean texCombine by about 2/3.

13 years agoglsl: Skip processing expression trees in optimize_redundant_jumps()
Eric Anholt [Fri, 11 Mar 2011 21:03:54 +0000 (13:03 -0800)]
glsl: Skip processing expression trees in optimize_redundant_jumps()

Cuts the time spent in this function during glean texCombine by 2/3.

13 years agosvga: Tell the host to discard when doing writes without FLUSH_EXPLICIT.
José Fonseca [Mon, 14 Mar 2011 16:55:46 +0000 (16:55 +0000)]
svga: Tell the host to discard when doing writes without FLUSH_EXPLICIT.

13 years agosvga: Update svga_winsys_screen::buffer_map comments.
José Fonseca [Tue, 15 Mar 2011 15:43:33 +0000 (15:43 +0000)]
svga: Update svga_winsys_screen::buffer_map comments.

13 years agosvga: Ensure DMA commands are serialized with unsynchronized flag is unset.
José Fonseca [Fri, 11 Mar 2011 14:00:25 +0000 (14:00 +0000)]
svga: Ensure DMA commands are serialized with unsynchronized flag is unset.

13 years agoscons: copy hash_table.c, symbol_table.c to glsl directory
Jose Fonseca [Fri, 11 Mar 2011 23:33:18 +0000 (16:33 -0700)]
scons: copy hash_table.c, symbol_table.c to glsl directory

This fixes an issue where the .obj files wound up in the src/
directory rather than the build/ directory.  That prevented
combined 32-bit and 64-bit builds from working.

Signed-off-by: Brian Paul <brianp@vmware.com>
13 years agomesa: fix scons build
Marek Olšák [Tue, 15 Mar 2011 15:25:16 +0000 (16:25 +0100)]
mesa: fix scons build

13 years agor300g: implement the texture barrier
Marek Olšák [Tue, 8 Mar 2011 10:34:28 +0000 (11:34 +0100)]
r300g: implement the texture barrier

13 years agogallium: add texture barrier support to the interface and st/mesa (v2)
Marek Olšák [Tue, 8 Mar 2011 10:32:35 +0000 (11:32 +0100)]
gallium: add texture barrier support to the interface and st/mesa (v2)

v2: change the gallium entry point to texture_barrier.

13 years agomesa: add display list support for NV_texture_barrier
Marek Olšák [Fri, 11 Mar 2011 23:15:22 +0000 (00:15 +0100)]
mesa: add display list support for NV_texture_barrier

13 years agomesa: regenerate glapi files
Marek Olšák [Tue, 8 Mar 2011 10:30:54 +0000 (11:30 +0100)]
mesa: regenerate glapi files

Be sure to type "make clean" after this commit, otherwise your binaries
will segfault.

13 years agomesa: add NV_texture_barrier
Marek Olšák [Tue, 8 Mar 2011 10:29:20 +0000 (11:29 +0100)]
mesa: add NV_texture_barrier

13 years agogallium/util: Use PIPE_TRANSFER_DISCARD_RANGE in pipe_buffer_write.
Mathias Fröhlich [Thu, 10 Mar 2011 05:46:32 +0000 (06:46 +0100)]
gallium/util: Use PIPE_TRANSFER_DISCARD_RANGE in pipe_buffer_write.

Additionally, to discarding the whole buffer, use
PIPE_TRANSFER_DISCARD_RANGE in pipe_buffer_write when the
write covers only part of the buffer.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
13 years agost/mesa: Make use of the new PIPE_TRANSFER_DISCARD_* for buffer object.
Mathias Fröhlich [Sat, 26 Feb 2011 07:20:34 +0000 (08:20 +0100)]
st/mesa: Make use of the new PIPE_TRANSFER_DISCARD_* for buffer object.

In memory mapping buffer objects make use of
PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE and PIPE_TRANSFER_DISCARD_RANGE
when appropriate.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
13 years agoglx: add ARB_create_context functions/ops to glx xml
Dave Airlie [Tue, 15 Mar 2011 04:26:57 +0000 (14:26 +1000)]
glx: add ARB_create_context functions/ops to glx xml

13 years agor600g: FLT_TO_INT_FLOOR and FLT_TO_INT_RPI are vector-only instructions on Evergreen.
Henri Verbeet [Tue, 15 Mar 2011 00:13:45 +0000 (01:13 +0100)]
r600g: FLT_TO_INT_FLOOR and FLT_TO_INT_RPI are vector-only instructions on Evergreen.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: fix logic error in 028987c80362eddd39176628486a456b076f0427
Alex Deucher [Mon, 14 Mar 2011 22:07:15 +0000 (18:07 -0400)]
r600g: fix logic error in 028987c80362eddd39176628486a456b076f0427

Spotted by Henri on IRC.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
13 years agor600g: don't set per-MRT blend bits on R600
Alex Deucher [Mon, 14 Mar 2011 21:53:00 +0000 (17:53 -0400)]
r600g: don't set per-MRT blend bits on R600

It doesn't support them.  Also, we shouldn't be
emitting CB_BLENDx_CONTROL on R600 as the regs don't
exist there, but I'm not sure of the best way to deal
with this in the current r600 winsys.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
13 years agor600g: Original R600 does not support per-MRT blends
Alex Deucher [Mon, 14 Mar 2011 21:47:21 +0000 (17:47 -0400)]
r600g: Original R600 does not support per-MRT blends

Only rv6xx+ support them.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
13 years agor600g: emit SURFACE_BASE_UPDATE packet on rv6xx
Alex Deucher [Mon, 14 Mar 2011 20:58:27 +0000 (16:58 -0400)]
r600g: emit SURFACE_BASE_UPDATE packet on rv6xx

This packet is required when updating the DB, CB,
or STRMOUT base addresses on rv6xx for the surface
sync logic to work correctly.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
13 years agor600g: Properly update MULTIWRITE_ENABLE in r600_pipe_shader_ps().
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Properly update MULTIWRITE_ENABLE in r600_pipe_shader_ps().

This sort of worked because blend state setup cleared MULTIWRITE_ENABLE again,
but that's not something we want to depend on.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Fix the DB_SHADER_CONTROL mask in create_ds_state().
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Fix the DB_SHADER_CONTROL mask in create_ds_state().

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Properly update DB_SHADER_CONTROL in evergreen_pipe_shader_ps().
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Properly update DB_SHADER_CONTROL in evergreen_pipe_shader_ps().

Disable Z_EXPORT / STENCIL_EXPORT / KILL_ENABLE again if a shader doesn't
use those. This is similar to 0a6f09a76a416b8672e149c520aa5bef33174223.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Move fetch shader register setup to r600_state.c / evergreen_state.c.
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Move fetch shader register setup to r600_state.c / evergreen_state.c.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Move r600_pipe_shader_ps() to r600_state.c.
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Move r600_pipe_shader_ps() to r600_state.c.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Move r600_pipe_shader_vs() to r600_state.c.
Henri Verbeet [Mon, 14 Mar 2011 21:07:44 +0000 (22:07 +0100)]
r600g: Move r600_pipe_shader_vs() to r600_state.c.

The idea behind this is that anything touching registers should be in
r600_state.c or evergreen_state.c. This is also consistent with
evergreen_pipe_shader_vs().

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agor600g: Evergreen add support for log opcode.
Rafael Monica [Mon, 14 Mar 2011 10:40:12 +0000 (11:40 +0100)]
r600g: Evergreen add support for log opcode.

Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
13 years agoautoconf/make: Don't specify individual llvm libraries.
José Fonseca [Mon, 14 Mar 2011 19:58:22 +0000 (19:58 +0000)]
autoconf/make: Don't specify individual llvm libraries.

We need more and more of these, and it is difficult and prone to version
incompatability issues trying to single out every one of them.

This mimicks what was done in SCons.

13 years agoi965: Enable texture lookups whose return type is 'float'
Kenneth Graunke [Mon, 14 Mar 2011 18:32:24 +0000 (11:32 -0700)]
i965: Enable texture lookups whose return type is 'float'

This enables the new shadow texture functions in GLSL 1.30.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>