git.libre-soc.org Git - buildroot.git/log

package/racehound: bump and fix dependencies

As pointed out by Arnout, racehound does not require kernel headers
3.14-or-later. So, drop this depenency.

It stills require a kernel >= 3.14 to build and run, but we really
have no way to express that dependency as Kconfig options.

Besides, racehound does not build with kernel 4.5 because the struct
modules has been updated. Bump racehound to fix that build failure.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mtd-utils: ubinize: fix return code on error

ubinize 1.5.2 (currently packaged in Buildroot) returns 0 in case of
some errors. This can lead to unnoticed errors in the middle of a
build.

Fix by adding a patch from upstream, which is not yet present in any
released version.

Fetch from: http://git.infradead.org/mtd-utils.git/commit/5f50207231414bfdbac8f0f974a2824f24177d6e

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pymysql: new package

add python to MySQL connection software, written in pure python

Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdriver_x86-input-joystick: Install server config

In order for joysticks to be detected and used with this
driver, we need an xorg-server configuration file. This commit
installs such conf file to the default X11 xorg.conf.d path,
so we can at least provide a working template.

Users with specific needs can of course override it.

Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use XDRIVER_XF86_INPUT_JOYSTICK_PKGDIR
- remove useless empty line.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wpa_supplicant: Fix systemd service for new DBus bus name

systemd service files were supplied with old DBus bus name. After
service activation systemd was waiting for appearance of specified bus
name to consider it started successfully. However, if wpa_supplicant was
compiled only with new dbus interface name, then systemd didn't notice
configured (old) DBus bus name appearance. In the end service was
considered malfunctioning and it was deactivated.

Add upstreamable patch [1], which updates systemd service BusName
property according to configured DBus interface version.

[1] http://lists.infradead.org/pipermail/hostap/2016-April/035599.html

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pysmb: bump to version 1.1.18

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyroute2: bump to version 0.3.20

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-click: bump to version 6.6

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-lxml: bump to version 3.6.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

googlefontdirectory: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opentyrian-data: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pcsc-lite: add hash file

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pango: bump to version 1.40.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sysstat: bump to version 11.2.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gvfs: bump to version 1.28.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: bump to version 3.4.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtasn1: bump to version 4.8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mutt: bump version to 1.6.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuv: bump to version 1.9.0

Remove uClibc-ng patch applied upstream [1].

[1] https://github.com/libuv/libuv/commit/c8619721404c2a9f97adc34a8c3b5336317311bc

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

harfbuzz: bump to version 1.2.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vnstat: needs host-pkgconf

vnstat uses the PKG_CHECK_MODULES macro and therefore requires pkg-config.

Note that for adding the dependency gd to VNSTAT_DEPENDENCIES the assignment
was changed from '=' to '+='.

Fixes:
http://autobuild.buildroot.net/results/4dd/4ddb0d7d7fe2509ff9c4753d918e0bebd7725c13/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

apache: bump to version 2.4.20

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rabbitmq-c: bump to version 0.8.0

Made use of github helper because no official tarball
is released.

Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netsniff-ng: bump to version 0.6.1

Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.12.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lirc-tools: needs a C++ toolchain

NEWS file record for version 0.9.3:

* The compiler has been switched to c++, and filenames are
updated to *.cpp (#79)

Fixes:
http://autobuild.buildroot.net/results/63b/63b1e427df1d6f264517a028655ac80d8d289254/
http://autobuild.buildroot.net/results/340/3409a4af78c83ea354d861052521f634347cd69a/
http://autobuild.buildroot.net/results/88a/88a117c229286ed739bd0ef832fa01a99825286a/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libgtk3: bump to version 3.20.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/racehound: fix comment

racehound requires a kernel >= 3.14 to be built and to run.

However, the current conditions on the corresponding comments are wrong:
  - the comment about the kernel has a dependency on the requested
    headers
  - the comment on the toolchain features does not have this condition.

Thus, the comments are not shown/hidden under the appropriate
conditions, like in this situation:
  - toolchain with headers < 3.14 (e.g. Sourcery CodeBench x86/x86_64
    2012.09 with headers 3.5)
  - kernel 4.5 enabled

this comment is shown:
    racehound needs an Linux kernel >= 3.14 to be built

So, this is incorrect, because:
1- a kernel >= 3.14 is indeed to be built
2- the headers version mismatch is not reported

Fix that by moving the dependency on the kernel headers to the
appropriate comment and enhance it.

Since there is no way we can know the kernel version to be built, we can
not add such a condition; still, we leave the kernel message as-is.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lksctp-tools: requires dynamic library support

Fixes:
http://autobuild.buildroot.net/results/259/25910726158f4b2cbd9ceb60c170f4b2d0b546ef/
http://autobuild.buildroot.net/results/94a/94ab8ba783a67529a62d4994ab8c62c8656a05e6/
http://autobuild.buildroot.net/results/1e5/1e59f273e0f31646065a1323a2e231c17babfe59/

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

links: fix static link with directfb

The AC_HAVE_FUNCS autoconf macro uses gcc to check for function existence.
This breaks when the library depends on libstdc++, like directfb. Add this
dependency externally.

Fixes:
http://autobuild.buildroot.net/results/548/548019b71c7db649f20d2c479bb8fb3612162d4a/
http://autobuild.buildroot.net/results/c94/c9495f54db388bde9d64325bb57fc4e58741f7a7/
http://autobuild.buildroot.net/results/9b8/9b883d42bff3633f16447d76d2eb4ddf68013788/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongodb: bump to version 3.3.4

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wine: Bump to version 1.8.2

Bumping to stable version 1.8.2

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.5.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.14.x and 4.{4, 5}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba4: security bump to version 4.4.2

Fixes:

CVE-2016-2118 - A man in the middle can intercept any DCERPC traffic
between a client and a server in order toimpersonate the client and get
the same privileges as the authenticated user account.

CVE-2016-2115 - The protection of DCERPC communication over ncacn_np
(which is the default for most the file server related protocols) is
inherited from the underlying SMB connection. Samba doesn't enforce SMB
signing for this kind of SMB connections by default, which makes man in
the middle attacks possible.

CVE-2016-2114 - Due to a bug Samba doesn't enforce required smb signing,
even if explicitly configured.

CVE-2016-2113 - Man in the middle attacks are possible for client
triggered LDAP connections (with ldaps://) and ncacn_http connections
(with https://).

CVE-2016-2112 - A man in the middle is able to downgrade LDAP
connections to no integrity protection. It's possible to attack client
and server with this.

CVE-2016-2111 - When Samba is configured as Domain Controller it allows
remote attackers to spoof the computer name of a secure channel's
endpoints, and obtain sensitive session information, by running a
crafted application and leveraging the ability to sniff network traffic.

CVE-2016-2110 - The feature negotiation of NTLMSSP is not downgrade
protected. A man in the middle is able to clear even required flags,
especially NTLMSSP_NEGOTIATE_SIGN and NTLMSSP_NEGOTIATE_SEAL.

CVE-2015-5370 - Errors in Samba DCE-RPC code can lead to denial of
service (crashes and high cpu consumption) and man in the middle
attacks.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2016.04.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

graphite2: bump to version 1.3.8

And upstream switches tarball name yet again, so adjust SOURCE.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sqlite: bump to version 3.12.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: don't forcibly disable simple EGL clients

Only do so when there's no EGL.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: check for both EGL and GLES

The conditional is wrong, it was check for BR2_PACKAGE_MESA3D_OPENGL_ES
(correct, means GLESv2 support) and BR2_PACKAGE_MESA3D_OPENGL_GLES
(incorrect, there's no such symbol).
So now check for BR2_PACKAGE_MESA3D_OPENGL_EGL (EGL support) plus
BR2_PACKAGE_MESA3D_OPENGL_ES (GLESv2 support), both are required.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xorriso: Unify help description

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: bump version to 4.87

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mesa3d: needs host-bison and host-flex

Fixes (host-bison):
http://autobuild.buildroot.net/results/e91/e919dbe6660a6c8c087969a6646e97dd058ce2c7/
Fixes (host-flex):
http://autobuild.buildroot.net/results/66d/66d45e34a38f15e391500ea7f7036606bbaf2655/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: bump to version 4.5.0

Drop 0003-iproute2-fix-building-with-musl.patch since it's upstream.
Add gentoo patch to allow for non-iptables builds.
Add new musl build fix.
Tweak 0001-Avoid-in6_addr-redefinition.patch since the first chunk is no
longer required.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libqmi: bump to version 1.14.2

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/Makefile.in: adjust LDFLAGS for elf2flt

So far, our LDFLAGS for the BR2_BINFMT_FLAT case were only used on
Blackfin. However, passing -elf2flt in LDFLAGS is wrong. Indeed,
LDFLAGS are not linker flags, but flags passed to the compiler when
linking.

If you pass -elf2flt to the compiler when linking, it is understood as
"-e lf2flt", i.e "the entry point is named lf2flt", which isn't
exactly the intention. We in fact need to pass -Wl,-elf2flt in LDFLAGS
as well, so that the compiler passes -elf2flt down to the linker.

For some reason, this option does not cause an issue with the Blackfin
toolchain, but it does with either a Buildroot toolchain for Cortex-M
or an OSELAS toolchain for Cortex-M. We have verified that passing
-Wl,-elf2flt continues to work with the Blackfin toolchain.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-buildroot: don't show musl on noMMU platforms

While musl has recently gained noMMU support for the sh2 platform, we
don't support this yet. So for the time being, let's not show musl as
an available C library on noMMU platforms. This is for example
important on ARM noMMU: ARM is supported by musl, but not its noMMU
variants.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-buildroot: update glibc comment for noMMU

glibc is not available for noMMU platforms, so it doesn't make sense
to show the comment about glibc requiring dynamic libraries on noMMU
platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

musl: build broken on Thumb, use ARM mode

Building the musl C library on Thumb (Thumb1, not Thumb2), fails with:

{standard input}:20: Error: only lo regs allowed with immediate -- `mov fp,#0'
{standard input}:21: Error: only lo regs allowed with immediate -- `mov lr,#0'
{standard input}:25: Error: unshifted register required -- `and ip,a1,#-16'

Since there are no cores that we support that are Thumb1 only, use the
same solution as the one used by glibc: build the C library in ARM
mode.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: context functions are not Thumb-compatible

The context functions in uClibc unconditionally use the classic ARM
instruction set.

On platforms that do support the ARM instruction set, there is no problem -
However, on platforms that only support the Thumb instruction set, the
context functions cannot be built since the assembler code is not
Thumb-ready. Therefore, these functions must be disabled on such
platforms. All Thumb1 platforms support ARM instructions, so this is
only relevant for Thumb2-only platforms (i.e., Cortex-M).

Note that some packages require the context functions, so these will
fail to build on these platforms. It is worth mentioning that musl
also doesn't provide the context functions, and those are rarely
used. Affected packages will be handled in later patches.

[Peter: slightly reworded]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: use upstreamed patch for ARM Thumb simplification

The uClibc patches to simplify the ARM Thumb configuration options
have been merged, but instead of being 5 separate patches, they have
been merged as a single patch.

This commit updates the Buildroot uClibc package to use the patch that
was actually upstreamed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sawman: completely remove the package

In commit 11573f5a14d1c2726ce9623de3a5f118085a420f ("sawman: remove
package"), we removed the sawman package, but forgot to remove the
hash file of that package. This commit finalizes the removal by
getting rid of the hash file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsrtp: security bump to version 1.5.4

Fixes CVE-2015-6360: Prevent potential DoS attack due to lack of bounds
checking on RTP header CSRC count and extension header length.

Also, add a hash file.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

evemu: bump version to 2.4.0

See [1] for details.

[1] https://lists.freedesktop.org/archives/input-tools/2016-April/001274.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

harfbuzz: bump to version 1.2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mesa: add vc4 driver support

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.18.x and 4.1.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: Add custom Subversion repository support for the package

Signed-off-by: Pauli Sundberg <susundberg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/uboot: Add custom Subversion repository support for the package

Signed-off-by: Pauli Sundberg <susundberg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: use zImage by default on ARM

Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.

All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

network-manager: bump version to 1.0.12

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squid: bump version to 3.5.16

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lvm2: bump version to 2.02.149

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libshout: bump version to 2.4.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mosh: requires wchar

Fixes:
http://autobuild.buildroot.net/results/dc6/dc60afdf2b6035cd72567cf37b837db087c79bea/
http://autobuild.buildroot.net/results/624/624a1fcae9633940714ae4e8ad9864e9611e93ec/
http://autobuild.buildroot.net/results/e95/e95c8cff40c87f167f82e37430ebd1f37c8c242e/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 11.2.0

Rebased 0002-Fix-runtime-error-with-uClibc.patch

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

weston: egl requires gles as well

>From configure.ac lines 83-89:

AC_ARG_ENABLE(egl, [ --disable-egl],,
enable_egl=yes)
AM_CONDITIONAL(ENABLE_EGL, test x$enable_egl = xyes)
if test x$enable_egl = xyes; then
AC_DEFINE([ENABLE_EGL], [1], [Build Weston with
EGL support])
PKG_CHECK_MODULES(EGL, [egl glesv2])
PKG_CHECK_MODULES([EGL_TESTS], [egl glesv2 wayland-client
wayland-egl])

It also requires wayland-egl which is only provided by mesa3d for now,
hence make it conditional on mesa3d egl+gles.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xserver_xorg-server: bump version to 1.18.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xproto_inputproto: bump version to 2.3.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump version to 2.8.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

librsvg: bump to version 2.40.15

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

feh: bump to version 2.14.2

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wilc1000-firmware: new package

Firmware for Atmel Wilc1000 wireless device.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas:
- add missing hash file
- simplify installation step]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: security bump to version 5.6.20

Fixes (no CVEs yet):
Buffer over-write in finfo_open with malformed magic file.
Invalid memory write in phar on filename with \0 in name.
Parsing of tar file with duplicate filenames causes memory leak.
php_snmp_error() Format String Vulnerability.
Integer Overflow in php_raw_url_encode.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.2.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fastd: bump to v18

Release notes at http://fastd.readthedocs.org/en/v18/releases/v18.html

First patch rebased, second patch removed (gone upstream). Using tarball
and hashes instead of git now.

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuecc: bump to v7

>From v6 to v7 just few changes were made for performance improvement and
compatibility.

Switched from git download to source tarballs and hashes.

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-utils: bump to version 1.1.1

Patches upstream so drop them.

The 'bat' binary utility was renamed to 'alsabat' probably to avoid some
clash, keep the old .config symbol to avoid pointless legacy.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-lib: bump to version 1.1.1

Drop 0001-add-missing-include.patch since it's upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: bump to version 3.20.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nload: new package

Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibmm: bump to version 2.48.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: bump to version 2.0.30

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: rename Zynq defconfig files

These three are Zynq boards and the build procedure is almost the
same.  Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.

This commit renames as follows:

   zedboard_defconfig     -> zynq_zed_defconfig
   microzed_defconfig     -> zynq_microzed_defconfig
   xilinx_zc706_defconfig -> zynq_zc706_defconfig

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: add vc4 (Raspberry Pi) option

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

norm: fix build failure with old headers

The version check for the nfq_get_payload prototype is wrong since it's
done against linux headers when in fact it changed with the 1.0.0
release of libnetfilter_queue, leading to build failure in toolchains
that have old headers when libnetfilter_queue is present. Fixes:
http://autobuild.buildroot.net/results/c0e/c0e897a6db888d4a7e0302cdc1e0cbec7d1e88f3/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: needs gcc >= 4.8

Uses C++11, fixes:
http://autobuild.buildroot.net/results/4a9/4a9999555c20e495d4981deafc2960940e67febe/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/systemd: Respect BR2_TARGET_GENERIC_GETTY_BAUDRATE

Currently systemd getty services ignore baudrates set in buildroot in
favour of a hardcoded 115200. This patch SEDs out that hardcoded value with
what is selected.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: enable linuxthreads for xtensa

linuxthreads is the only threading option for noMMU xtensa, enable it.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: add xtensa uClinux support

Backported from: r228450
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: bump to version 1.7.4

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: fix build with nothread toolchains

>From upstream changelog:
> If LWS_MAX_SMP=1, then there is no code related to pthreads compiled in the
library. If more than 1, a small amount of pthread mutex code is built into
the library.

Set LWS_MAX_SMP=1 for toolchains without thread support, otherwise leave it
unset so upstreams CMakeLists.txt will take care of it.

Fixes:
http://autobuild.buildroot.net/results/dbf/dbf45a52b9aef602fd62ad1ca10957bafe656923/
http://autobuild.buildroot.net/results/26c/26c2ac28f44f8f1b227caa715af60bcd92a5f740/
http://autobuild.buildroot.net/results/d65/d65dcbfb96b249e01b034c01a52884b522c778b3/
http://autobuild.buildroot.net/results/e55/e550ebfdd1e8f459ca7b12f2708a704eaec52474/
.. and more.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: add patch to fix musl build

Add patch from upstream [1] to fix musl build:
fatal error: sys/cdefs.h: No such file or directory

Fixes:
http://autobuild.buildroot.net/results/564/564675be0d4fbfa113a0f2e52874e0dce2d5ba5e/
http://autobuild.buildroot.net/results/c41/c41d87c0cf22f3b88e5f80ad6bf5e81900603c1d/

Backported from: 9eec5e4470397632af035c429295a41b74bd0585

[1] https://github.com/warmcat/libwebsockets/commit/9eec5e4470397632af035c429295a41b74bd0585

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: fix getchar issue with uClibc and gcc <= 4.8.2

getchar() is defined as a macro in uClibc. This hits gcc bug 58952 [1] for all
gcc versions <= 4.8.2 and building boost/test fails:

./boost/test/impl/unit_test_main.ipp: In function 'int boost::unit_test::unit_test_main(boost::unit_test::init_unit_test_func, int, char**)':
./boost/test/impl/unit_test_main.ipp:194:18: error: expected unqualified-id before '(' token

To allow building boost/test with uClibc based toolchains with gcc <= 4.8.2 use
parenthesis for std::getchar.

Fixes:
http://autobuild.buildroot.net/results/506/506b3b1b4087318a4247456782ac9e4f128d5db6/
http://autobuild.buildroot.net/results/5f2/5f2a8fb5cb823160542ee721591867b34bd25de6/
http://autobuild.buildroot.net/results/e3e/e3e6002ac5b40f7f03d32ba9da99f6497f01b42f/
.. and more

Upstream status: Pending
https://github.com/boostorg/test/pull/97

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58952

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: bump version to 2.2.23

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nss: security bump to version 3.23

Fixes:
CVE-2016-1950 - Fixed a heap-based buffer overflow related to the
parsing of certain ASN.1 structures. An attacker could create a
specially-crafted certificate which, when parsed by NSS, would cause a
crash or execution of arbitrary code with the permissions of the user.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: add license info

Now that we use unbundled ffmpeg the licensing becomes much easier.
Relevant code is under ext/*, which according to COPYING and comments is
GPLv2+, except for ext/libswscale/gstffmpegscale.c which is LGPLv2+ -
however that's not built/used when using system ffmpeg.

The code under gst-libs/ is the bundled ffmpeg itself.

Tests are under LGPLv2+ as well but we don't build them since we
disabled gst-check support in the gstreamer1 package.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: switch to unbundled

It avoids the crazy in handling all of the ffmpeg options here as well,
and potentially avoids target code duplication, hence resulting in a
size reduction.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: extend help text as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>