package/mii-diag: add license file hash

The indentation of the other lines are adopted for consistency.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-screensaver-pyro: add license file hash

Adopt the new trending spacing while at it.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-screensaver-biogenesis: add license file hash

Adopt the new trending spacing while at it.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-screensaver-matrixtrails: add license file hash

Adopt the new trending spacing while at it.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-audioencoder-vorbis: add license file hash

Adopt the new trending spacing while at it.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/freescale-imx/firmware-imx: install video encode decode firwmare to target for imx8x

Signed-off-by: Refik Tuzakli <tuzakli.refik@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcodec2: bump version to 0.9.2

Removed patch applied upstream:
https://github.com/drowe67/codec2/commit/375d4c8d782c3bcadbb2240efed39b64ffd28430

Switched _SITE to github as suggested by
http://www.rowetel.com/?page_id=452

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freescale-imx: BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU is also true on i.MX8X

This will allow to select the imx-gpu-viv package on i.MX8X.

Signed-off-by: Refik Tuzakli <tuzakli.refik@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: use interface name for networkd config file

By using the interface in the filename for the networkd config file,
we have a clear association between the config file and the interface
it applies to.

This is beneficical for systems that have multiple interfaces.

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gqrx: suppress dependency to not BR2_PACKAGE_PYTHON3

Since Gnuradio 3.8 support python3 dependency to only python2 is no more
mandatory

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gr-osmosdr: add python3 support

Gnuradio 3.8 support python2 and python3 and since gr-osmosdr support both two,
adapts dependencies

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnuradio: add python3 support

gnuradio 3.8.0.0 support both python2 and python3.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnuradio: bump to version 3.8.0.0

Since 2019/08/09 a new version of gnuradio is available.
This patch bump to this version with some modifications:
- suppress the applied patch 0001-socket_pdu_impl.cc-fix-build-with-boost-1.70.0.patch
- backport patch to have boost unit_test_framework optional instead of mandatory:
  https://github.com/gnuradio/gnuradio/pull/2927
- backport patch to fix neon version detection:
  https://github.com/gnuradio/volk/pull/319
- add boost atomic (used by pmt), log4cpp (now mandatory) and gmp as dependencies
- suppress the no more available BR2_PACKAGE_GNURADIO_LOG, since log4cpp is mandatory. Since this
  option is now always true no need to add an entry in legacy.
- suppress all workaround for neon. Now volk is able to detect correctly neon
  version.
- add explictly path to python interpreter

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gr-osmosdr: bump version to support Gnuradio 3.8

Gnuradio 3.8 has made some API changes. The current gr-osmosdr release
does not support these changes, so move to a more recent gr-osmosdr
commit, which has Gnuradio 3.8 support.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gqrx: backport/adapt patch to suppport Gnuradio 3.8

Gnuradio 3.8 has broken some APIs, and the current gqrx release does
not support these API changes.

So we add compatibility backport patches from the following
pull-request: https://github.com/csete/gqrx/pull/705

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bluez_utils: drop package

BlueZ 4.x is deprecated since a long time (BlueZ 5.x has been released
in 2012) so drop it.

For cwiid, sconeserver and ussp-push, replace bluez_utils by
bluez5_utils. All other packages already support bluez5_utils so just
drop bluez_utils.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.4.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/haproxy: bump to version 2.1.2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mutt: fix build without makedoc

Cross-compilation of mutt is broken since bump to version 1.13.3 with
commit d42603b3872a0eed5a5a3dda13843fb5835f15a5

Indeed, since upstream commit 9bacbaa9, even with --disable-doc, mutt
tries to generate and install documentation files.
Build fails because mutt wants to generate muttrc.man by building (and
then running) a makedoc binary with the target cross-compiler (which
will obviously fail).

See https://gitlab.com/muttmua/mutt/issues/202

To fix this issue, retrieve two upstream patches.

Fixes:
 - http://autobuild.buildroot.org/results/2b01b7e65c0dc0e1191ba48e02e31503958d82fe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing: new opkg test case

- Validates an archive can be installed and removed
- Builds an archives that uses postinst and prerm scripts

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

pru-software-support: bump to latest version 5.6.0

Update to the latest version of the PRU software support.

Formatting for the license file has been updated compared with the
previous package version 5.1.0 but the licenses used appear the same.

Signed-off-by: Ash Charles <ashcharles@gmail.com>
[yann.morin.1998@free.fr: fold the license hash patch into this patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

ti-cgt-pru: bump to latest version 2.3.3

Update to the latest version of the PRU code generation toolchain [1].
The license files differ only in whitespace and the version numbers
references compared with the previous release.

[1] https://release-monitoring.org/project/59398/

Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libinput: bump version to 1.15.1

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2020-February/041186.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/smartmontools: add libselinux optional dependency

libselinux is an optional dependency since a very long time (2010) and
https://github.com/mirror/smartmontools/commit/ab807ee43bd4821f5e0e010de08a746d88506b17

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rocksdb: new package

The RocksDB library provides a persistent key value store. Keys and
values are arbitrary byte arrays. The keys are ordered within the key
value store according to a user-specified comparator function.

The library is maintained by the Facebook Database Engineering Team, and
is based on LevelDB, by Sanjay Ghemawat and Jeff Dean at Google.

http://rocksdb.org

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/uboot: needs make >= 4.0

Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.

In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.

So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.

Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/uboot-tools: needs make >= 4.0

Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.

So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.

Fixes:
    http://autobuild.buildroot.org/results/c97/c976ed5eb7760cba192d22b3f1e7460596fd82dd/

Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-validators: bump version to 0.14.2

Fixes an issue with domain name validation.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gensio: bump to version 1.4.1

Removed patches that are now upstream.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: drop autoreconf]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmpdclient: bump to version 2.18

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/iproute2: bump to version v5.5.0

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ncmpc: bump to version 0.37

Bump gcc requirement to gcc >= 7 as C++17 is mandatory since
https://github.com/MusicPlayerDaemon/ncmpc/commit/85f136dd6b6a8d044b19cbef818ee360292cc06e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ptm2human: bump version to d0b8b6be98

Also drop upstreamed patch.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minizip: bump to version 2.9.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/whois: bump to version 5.5.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fail2ban: add conditional python-systemd dependancy

fail2ban needs python-systemd for its systemd backend to
be able to read logs from systemd/journald

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jack2: bump to version 1.9.14

Amongst other things, the jack2 waf script has been made
compatible with Python3 in this latest release, which makes
it possible to be built on py3

See also upstream release notes:
- https://github.com/jackaudio/jack2/releases/tag/v1.9.13
- https://github.com/jackaudio/jack2/releases/tag/v1.9.14

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fail2ban: add python3 support

The fail2ban codebase is still native python2, but 2to3 is supported
upstream.

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[Peter: ensure host-python3 is available]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi: needs extra encodings in libiconv

The Kodi build system also enables extra encodings:
https://github.com/xbmc/xbmc/blob/Leia/tools/depends/target/libiconv/Makefile#L13

Without them addons fail to install:
https://github.com/garbear/kodi-steamlink/issues/34#issuecomment-579392269

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libiconv: enable extra encodings

Quoting https://www.gnu.org/software/libiconv/

"When configured with the option --enable-extra-encodings, it also
 provides support for a few extra encodings:

European languages
    CP{437,737,775,852,853,855,857,858,860,861,863,865,869,1125}
Semitic languages
    CP864
Japanese
    EUC-JISX0213, Shift_JISX0213, ISO-2022-JP-3
Chinese
    BIG5-2003 (experimental)
Turkmen
    TDS565
Platform specifics
    ATARIST, RISCOS-LATIN1"

Updating Kodi from version 17.6 to 18.5 caused runtime errors on systems
with locale support disabled, here Kodi uses libiconv but needs CP437:

ERROR: customConvert: iconv_open() for "CP437" -> "UTF-8" failed,
 errno = 22 (Invalid argument)

Due to the size increase of libiconv.so.2.6.0 from 941K to 1,1M a new
Config.in option was added.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: fix check-package warning]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sdl2: bump version to 2.0.10

Adjust license hash as the copyright year was changed:
-Copyright (C) 1997-2018 Sam Lantinga <slouken@libsdl.org>
+Copyright (C) 1997-2019 Sam Lantinga <slouken@libsdl.org>

Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/weston: bump to version 8.0.0

The autotools build system is deprecated and replaced with meson for weston.

We need to enable pango when building demo clients since it is required
by meson.

The dbus option in autotools is replaced with launcher-logind in meson
which is only ever used with systemd, so add it to the condition.

Replaced WESTON_NATIVE_BACKEND with backend-default in meson.

Added systemd dependency as launcher-logind depends on both dbus
and systemd and is the only dependency that requires dbus.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ninja: remove hard coded fdiagnostics-color compiler flag

Fixes:
http://autobuild.buildroot.net/results/e5a02faa75345009e7cdcbf9d693199bee4741aa

-fdiagnostics-color was introduced in gcc 4.9 and the minimum supported version
that Buildroot supports is 4.8.

As this option only controls the colors of error messages, just drop it.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imagemagick: explicitly disable opencl

Some packages installs libOpenCL without declaring
BR2_PACKAGE_PROVIDES_LIBOPENCL (e.g.  imx-gpu-viv).  ImageMagick will detect
the library and will require libtool.  Since libtool is not in dependencies,
build might fail.

To prevent that situation, explicitly disable opencl support for target and host.

Signed-off-by: Julien Olivain <juju@cotds.org>
[Peter: drop unneeded ax_cv_check_cl_libcl=no]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: fix separator comment location

When the fis and gadgetfs-test packages were removed, their respective
options in Config.in.legacy were placed before the "Legacy options
removed in 2020.02", while they should have been placed after. Let's
fix that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: change how its SELinux support is enabled

Following commit 0dcb5513ef0db8266b107a7f9fbc5fc1fedc888d
("package/refpolicy: remove dependency on policycoreutils"), we have a
build failure on some configurations:

Makefile:571: *** libselinux is in the dependency chain of busybox that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in.  Stop.

This is because refpolicy selects the busybox SELinux support when
Busybox is enabled, which it turns selects libselinux, but we no
longer pay attention to the libselinux dependencies while doing this.

Since it's quite weird to have refpolicy mess with Busybox SELinux
support, this commit changes the logic to have Busybox automatically
enable its SELinux support as soon as SELinux support is enabled,
while still allowing it to be disabled.

Fixes:

  http://autobuild.buildroot.net/results/5d8fda7c488a03c14942d87467d501acd633d24a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsepol: set default policy version

If a policy is built that is newer than the kernel can support, the
libsepol will fail to load that policy.

Indeed, a user can manually select the policy version in the config
as-is. However, it is not a friendly solution. The best solution available
is to set a default policy version based off of the toolchain header kernel
version. While a user may have a toolchain that has older kernel headers than
the built kernel, it is still better than setting the default to the maximum
available version that SELinux can support.

The following defaults policy versions are as follows for the given toolchain
headers:

31 >= 4.13
30 >= 4.3
29 >= 3.14
28 >= 3.5
26 >= 2.6
default 25

Note: Version 27 was never released.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsepol: change policy version to an int

The policy version has to be a number, as such, set the type to int.

Due to the type change, we can't any longer do the legacy handling of
re-using the refpolicy policy version.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{refpolicy,libsepol}: move policy version selection from refpolicy to libsepol

Currently, a user sets a policy version via the refpolicy package.
Having the option here has a few disadvantages:

  - The Refpolicy package is not technically needed to use SELinux.
  - When building a modular policy, Refpolicy will ignore the version string
    and build the highest version possible which will cause libsemanage to
    possibly fail when loading the policy.

Specifying a manual policy version in /etc/selinux/semanage.conf
forces libsemanage to load a specific policy version, which fixes the
above issue.  However, because refpolicy currently defines the policy
version, libsemanage does not have a way to determine the policy
version, as refpolicy is not a dependency of libsemanage.

To work around these limitations, move the policy version number
selection to libsepol, as a system using SELinux always requires this
library.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gadgetfs-test: remove package

Remove gadgetfs-test as gadgetfs has been deprecated in favour of
functionfs.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/glibc/riscv32: update LICENSE file hash

The LICENSE file hash wasn't changed with the last glibc bump for riscv32 [1].
The change is due to upstream LICENSE file update between glibc 2.26 and 2.29
[2] [3].

This issue was discovered by toolchain-builder [4].

[1] a4958567284026f979f6e0056a5b98bedd77e88f
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=7f9f1ecb710eac4d65bb02785ddf288cac098323
[3] https://sourceware.org/git/?p=glibc.git;a=commit;h=5a357506659f9a00fcf5bc9c5d8fc676175c89a7
[4] https://gitlab.com/kubu93/toolchains-builder/-/jobs/423826546

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/waf: bump to version 2.0.19

Also add myself as DEVELOPER, as waf is currently orphan,
and I am the last one to fiddle with it.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ninja: set minimum cmake version to 3.10

The CMakeLists.txt file uses the CMP0091 which is an MSVC runtime
library flag abstraction macro.

Because we are not building ninja for Microsoft, it is safe to remove
this macro and set the minimum version to 3.10.

Fixes:
http://autobuild.buildroot.net/results/992b34c5625ec733d8dce678aa7a7540c4768ca1

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/refpolicy: bump version to 2.20190609

Other changes:
  - Depend on host-python3, as python2 support was removed.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/refpolicy: remove dependency on policycoreutils

Only host-policycoreutils is needed to build refpolicy. Remove the uneeded
target package.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fis: remove package

Remove fis as RedBoot hasn't been updated for over 10 years.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/z*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/y*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/xfont*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/xdriver*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/xapp*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/x*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/w*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: fix weston after imx variant moved away]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/v*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/u*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/t*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/s*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/r*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[yann.morin.1998@free.fr: drop rt-test, already covered after bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/q*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/p*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/o*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/n*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/m*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lib*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: rebase libplist after bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/l*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[me: drop two that did no longer apply]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/k*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/j*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/i*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/h*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/g*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/f*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/e*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/d*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/c*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/b*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/a*: add license file hashes

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lld: bump to version 9.0.1

This was missed when LLVM and Clang were updated.

Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kexec-lite: bump version

Upstream changes include:

 - Fix loading FreeBSD kernels with multiple PT_LOAD sections.

 - Use autotools to configure and build kexec-lite

 - Add support for kexec_file_load

The packaging is adjusted to account for the change in build systems.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{openjdk,openjdk-bin}: bump version to 13.0.2+8

Other changes:
  - Add --with-stdc++lib=dynamic to openjdk.mk or else openjdk will fail to
    build because it defaults to looking for a static libstdc++ library.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5webkit: add patch to fix ICU related compile failure

Fixes (usage of ICU U16_NEXT() macro without trailing semicolon):

  platform/graphics/SegmentedFontData.cpp:65:9: error: expected ‘;’ before ‘if’
  dom/Document.cpp:3850:5: error: expected ‘;’ before ‘if’
  dom/Document.cpp:3855:9: error: expected ‘;’ before ‘if’
  dom/Document.cpp:3918:9: error: expected ‘;’ before ‘if’

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5webkit: convert patch to git format and re-number

Convert patch 0005-Fix-installation-of-class-headers.patch to git
format and re-number it to 0004-Fix-installation-of-class-headers.patch.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmodsecurity: needs threads

Fixes:
 - http://autobuild.buildroot.org/results/78391abbf87ac9c04b13d7aab7acf7d1aaade75d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libpjsip: add ffmpeg support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-django: security bump to version 3.0.3

Fixes the following security issues:

- CVE-2020-7471: Potential SQL injection via StringAgg(delimiter)
  django.contrib.postgres.aggregates.StringAgg aggregation function was
  subject to SQL injection, using a suitably crafted delimiter.

For more details, see the advisory:
https://www.djangoproject.com/weblog/2020/feb/03/security-releases/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python: re-enable hashlib

In commit e5cfb319f9493d677f059ca72b80f7fa22fc9f0f,
the committer did add the flag `--disable-hashlib` to python,
even though this was not part of the original patch
(https://patchwork.ozlabs.org/patch/1231905/).

This unexpected modification break the builds of waf-based
packages, such as jack2, mpv or aubio. This commit therefore

Fixes: http://autobuild.buildroot.net/results/2b3/2b377bcfda6e7ae4d6bb894664e3a4cb13a70b6d/
Fixes: http://autobuild.buildroot.net/results/cd5/cd5da8cb3da8479ebee60d011ce0c5dc0e59aab7/
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ninja: change package type to host-cmake

Ninja 1.10.0 now supports cmake as a build system. This change makes the make
file much more straightforward.

The host-python2 dependency is no longer needed as it is no longer
used during the build. We however need to keep install commands as
there is no installation step planned in CMakeLists.txt.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ninja: bump to version 1.10.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: fix shebang in deep build trees

The meson script includes the full path to the python interpreter. In
deep build trees, this path can be more than 128 characters long, which
is the limit for how long a shebang may be.

Notice that this has been bumped to 256 since kerel 5.1, but the issue still
persists:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6eb3c3d0a52dca337e327ae8868ca1f44a712e02

In older kernels, this limit was silently ignored, leading to potential
bugs, but newer kernels enforce that limit, and refuse to execve() the
script, returning with NOEXEC.  Since the script is +x, the shell (any
bourne shell, as well as the C shell) will conclude from that situation that
they should interpret it as a shell script, which it obviously is not.

Fix the problem by replacing the shebang with a call to /usr/bin/env
which will redirect to the correct python3 interpreter found in the
PATH.

Note however that this means our meson installation can no longer be
called from outside of the meson-package infrastructure anymore (not
that we ever supported it before, but who knows what people may have
done in their br2-external), unless one does set the PATH to include
$(HOST_DIR)/bin/ earlier than a system-provided python3 would be found.

Fixes: #12331 #12461
Reported-by: Jean-pierre Cartal <jpcartal@free.fr>
Reported-by: Matthias Weißer <m.weisser.m@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>