mem-ruby: expose transition info to actions

SLICC compiler generates the curTransitionEvent and
curTransitionNextState functions, which allows actions to check which
event triggered the current transition and what's the next state.

Change-Id: I79c8c4f2839633b7fb3b23cbbdbb32f25db90eab
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31420
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: change MessageBuffer randomization param

There are cases in which we need to prevent randomization for a
specific buffer when enabled at the RubySystem level (e.g. a internal
trigger queue that requires zero latency enqueue, while other buffers
can be randomized).

This changes the randomization parameter to support enabling and
disabling randomization regardless of the RubySystem setting.

Change-Id: If7520153cc5864897fa42e8911a6f8acbcf01db5
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31419
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: sequencer callback for unique writes

A controller may complete a write without obtaining a full copy of
the line. This patch adds a specific callback for this purpose that
prevents reads to be coalesced with a write on a potentially incomplete
line.

Change-Id: I3775f81699f38e406fee28f92c9c8e06deb3d528
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31269
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradford Beckmann <bradford.beckmann@gmail.com>

mem-ruby: move AddrRange propagation to RubyPort

Doing the master address range notification from the RubyPort.
This allows us the DMASequencer to be replaced by Sequencer in future
protocols.

Change-Id: I95edb54b39a8adf0cac5caf2b58e4a2efb573f56
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31268
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Sequencer can be used without cache

Moved the dcache check to the LLSC functions that use it.
This allows a Sequencer to be coupled with a gem5 object
that does not need a cache (as long as it doesn't issue
LLSC instructions).

Also, icache was not used at all so it was removed.

Change-Id: I04bd2711f8d0a7dfc952cff8e0020d2d1881cae1
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31267
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Bradford Beckmann <bradford.beckmann@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: int to Cycle converter

Change-Id: I493b16a0bdd01a4cef4891e273a376ebe9509fe8
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31266
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: support for template types in structs

Templated types can now be used within structures defined in SLICC.
Usage is similar to the TBETable: the templated type must have all
possible methods in it's SLICC definition. Eg.:

structure(Map, desc="Template map definition") {
    MachineID lookup(Addr);
    MachineID lookup(int);
}

structure(SomeType, desc="Some other struct definition") {
    MachineID addrMap, template="<Addr,MachineID>";
    MachineID intMap, template="<int,MachineID>";
}

Change-Id: I02a621cea5e4a89302762334651c6534c6574e9d
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31264
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Bradford Beckmann <bradford.beckmann@gmail.com>
Maintainer: Bradford Beckmann <bradford.beckmann@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: added function to check addr range

respondsTo checks if a controller address ranges includes a given
address.

Change-Id: I9a320011d93e7fd8df1ad3bda75c85d314261a99
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31263
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradford Beckmann <bradford.beckmann@gmail.com>

mem-ruby: missing method in NetDest interface

Change-Id: Ibf651c37c50174186daebebc06aa115e6bc2ed33
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31262
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Bradford Beckmann <bradford.beckmann@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: added %(mod) operator to SLICC

Change-Id: I9d1a10824ced3723d13e2843ad739ced72e476ce
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31260
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Minor cleanup of imports in isa_parser.py.

The with statement and print function are no longer in the future, and
the "inspect" module is not used. Also alphabetize the imports.

Change-Id: I35f2b7b0f7495cb9ca79d2cbe05f020560ec3593
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35280
Reviewed-by: Steve Reinhardt <stever@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Split utility methods/variables out of the ISA parser.

Change-Id: Ifbff4bc6633cd11f98b02ba1291a91c3ad189285
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35279
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Split the operand types out of the ISA parser.

These conceptually go together and don't depend on any other parts of
the parser.

Change-Id: Ia8bff0d0ec210bdeeb080808968faf9528ee03dd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35278
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Move the ISA parser into a package.

This will make splitting the parser into components easier, since it
will keep help keep everything together and organized.

Change-Id: I737641e124b6da8b1b18a49de9110c8424d8cc4f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35277
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Change how IO port devices are structured in the PC platform.

Before, for historical reasons, the PCI host device was the default
responder on the IO bus, meaning that when there was any type of
transaction which didn't have a device to go to, it would end up
looking like a PCI config transaction. It's very unlikely that this is
what it actually was, and what would happen would be arbitrary and
probably not helpful.

Also, there was no device in place to respond to accesses in x86's IO
port address space. On a real system, these accesses just return junk
and are otherwise legal. On systems where there would be physical bus
wires they would probably return whatever the last data on the bus was.

This would have been helpful when the platform was first being set up
because it would make it obvious when the OS tried to access a device
that wasn't implemented, but there were a few cases where it would
purposefully fiddle with ports with nothing on them. These had one off
backing devices in the config which would handle the accesses
harmlessly, but if the OS changed and tried to access other ports, the
configs would need to be updated.

Now, the PCI host is just another device on the bus. It claims all of
the PCI config space addresses, so any config access, even ones which
don't go with a device, will go to it, and it can respond with all 1s
like it's supposed to.

In it's place, the default responder is now a bus. On that bus is
a device which responds to the entire IO port address range with 0s.
The default on *that* bus is a device which will mark any accesses
as bad.

With this setup, accesses which don't go to a device, including a
device on the IO port address space, will go to the IO bus's default
port. There, if the access was an IO access, it will go to the device
which replies successfully with all 0s. If not, it's marked as an
error.

The device which backs the entire IO address space doesn't conflict
with the actual IO devices, since the access will only go towards it
if it's otherwise unclaimed, and the devices on the default bus don't
participate in routing on the higher level IO bus.

Change-Id: Ie02ad7165dfad3ee6f4a762e2f01f7f1b8225168
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35515
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Output new-world stats before legacy stats

Now that global stats have been converted to new-style stats, it's
desirable to output them before legacy stats. This ensures that global
statistics (e.g., host_seconds) show up first in the stat file.

Change-Id: Ib099d0152a6612ebbadd234c27f2f3448aef1260
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35617
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim, stats: Move global stats to Root

Global stats are currently exposed using the legacy stat system (i.e.,
without a parent group). This change moves global stats from
stat_control.cc to a group that gets exported from the Root object.

The implementation adds the Root::Stats class which has a single
global instance. This instance is exposed to the rest of the simulator
using the global rootStats symbol. The intention is that objects that
need global statistics in formulas access them through the rootStats
object.

The global names simSeconds, simTicks, simFreq, and hostSeconds are
now references to their respective members in the rootStats object.

Change-Id: I267b5244a0bcca93dd2dcf03388e7085bdd79c9e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35616
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Simplify Ruby prefetcher's filter access functions

The signatures request many things that do not need to be passed
around.

Change-Id: If780e848b19056c9213092b6fc8673bd4f37b65f
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24534
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Use CircularQueue for prefetcher's non unit filter

Ruby prefetcher's non-unit filter is a circular queue, so use the class
created for this functionality.

This changes the behavior, since previously iterating through the
filter was completely arbitrary, and now it iterates from the
beginning of the queue to the end when accessing and updating
the filter's contents.

Change-Id: I3148efcbef00da0c8f6cf2dee7fb86f6c2ddb27d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24533
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Use CircularQueue for prefetcher's unit filter

Ruby prefetcher's unit filter is a circular queue, so use the class
created for this functionality.

This changes the behavior, since previously iterating through the
filter was completely arbitrary, and now it iterates from the
beginning of the queue to the end when accessing and updating
the filter's contents.

Change-Id: I834be88a33580d5857c38e9bae8b289c5a6250b9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24532
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Build the operand REs in the isa_parser on demand.

These regular expressions search code snippets to find places where
operands are used. Rather than build them explicitly at the end of
processing the operands{{}} construct, wait until they're first going to
be used. That way, we'll be able to define operands in as many places as
we want, as long as we've done all we're going to do before the first
instructions are defined.

This will pave the way to defining operands in regular python in let
blocks, and then possibly outside of the parser altogether, perhaps into
scons where having lots of output files for individual instructions will
be easier to manage. For now, this just lets you define multiple
operands blocks which is not all that exciting on its own :)

Change-Id: I1179092316c1c0ac2613810bfd236a32235502fb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35237
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Steve Reinhardt <stever@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: fix include dependency

Removed include dependency between WriteMask and RubySystem.

Change-Id: I3e81267341e3875b1bb0fc3cb39f1a308e383dfd
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31258
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: additional WriteMask methods

Change-Id: Ib5d5f892075b38f46d1d802c043853f56e19ea12
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31257
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Network can use custom data msg size

The size for network data messages can be set using a configuration
parameter. This is necessary so line transfers may be split in multiple
messages at the protocol level.

Change-Id: I86a272de597b04a898071db412b921cbe1651ef0
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31256
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Srikant Bharadwaj <srikant.bharadwaj@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Allow same-cycle enqueue

Messages may be enqueued and be ready in the same cycle.

Using this feature may introduce nondeterminism in the protocol and
should be used in specific cases. A case study is to avoid needing an
additional cycle for internal protocol triggers (e.g. the All_Acks
event in src/mem/ruby/protocol/MOESI_CMP_directory-L2cache.sm).
To mitigate modeling mistakes, the 'allow_zero_latency' parameter must
be set for a MessageBuffer where this behavior is acceptable.

This changes also updates the Consumer to schedule events according to
this new behavior. The original implementation would not schedule a new
wakeup event if the wakeup for the Consumer had already been executed
in that cycle.

Additional authors:
- Tuan Ta <tuan.ta2@arm.com>

Change-Id: Ib194e7b4b4ee4b06da1baea17c0eb743f650dfdd
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31255
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: MessageBuffer capacity check

Trip assert if call enqueue on a full message buffer.

Change-Id: I842183d8bf2c681787f1b6ac23c95825095ad05d
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31254
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>

mem-cache: Encapsulate CacheBlk's status

Encapsulate this variable to facilitate polymorphism.

- The status enum was renamed to CoherenceBits, since it
  lists the coherence bits supported by the CacheBlk.
- status was made protected and renamed to coherence since
  it contains the coherence bits.
- Functions to set, clear and get the coherence bits were
  created.
- To set a status bit, the block must be validated first.
  This guarantees a constant flow and helps catching bugs.

As a side effect, some of the modified files contained long
lines, which had to be split.

Change-Id: I558cc51ac685d30b6bf298c78f86a6e24ff06973
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34960
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Isolate compression bit

The compression bit does not belong with the coherence bits.

Change-Id: I6e9f201a9961b8c6051ba599f051a444d585f0e4
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35700
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Isolate prefetching bit

Previously the prefetching bit was among the status bits;
yet, it has no correlation with the other bits. It has
been isolated as a single boolean, with a respective getter
and setter.

Change-Id: Ibe76e1196ca17a7c9ab9bda2216186707427cb64
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35699
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Create a tagged entry class

The TaggedEntry class inherits from the ReplaceableEntry
class. Its purpose is to define a replaceable entry with
tagging attributes.

It has been created as a separate class because both the
replacement policies and the AbstractCacheEntry use
ReplaceableEntry, and do not need the tagging information
to perform their operations.

Change-Id: I24e87c865fc21c79dea7e488507a8cafc5223b39
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35698
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Debug with blk's information instead of its state.

The print() function has been defined to facilitate debugging
regarding a block's metadata. Use it instead of accessing the
coherence bits directly.

Change-Id: Iba41f4ac067561970621a4bba809e1b315b0210d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35697
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add missing StridePrefetcher invalidation

A call to the entry's parent's invalidate function was missing.
Since an entry was only invalidated right before being used,
previous behavior was not breaking anything.

Change-Id: Ibbf31a0099600a8f6be70b3426bac9fcd1e5c749
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35696
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Make Stats::Group::mergeStatGroup public

The stat system currently assumes that the decision to merge groups is
done at construction time. This makes it hard to implement global
statistics that live in a single global group.

This change adds some error checking to mergeStatGroup and marks it as
a public method.

Change-Id: I6a42f48545c5ccfcd0672bae66a5bc86bb042f13
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35615
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Default ArmSystem to AArch64

Change-Id: I4dad29086c0b3e50bd2011363cb23625811b4b27
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35775
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Simplify the IntOp format slightly.

Change-Id: I693e56a04827287712e001cf99620085ab09b8ac
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35236
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Clean up some code in base.isa.

This includes the filterDoubles function which adds code to combine 32
bit values into doubles or 64 bit values for floating point, and the
splitOutImm function which detects if the code that implements an
instruction has a register and immediate variant, and generates code for
each.

Change-Id: I5524b9acd6e610b51fd91fe70276c34c23be9f85
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35235
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a mechanism for finding an compatible SE workload.

This makes it possible to pick an SEWorkload generically at the config
level and not in C++ after the structure of the simulation has already
been set.

Change-Id: I7e52beb5a4d45aa43192e1ba4de6c5aab8b43d84
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33900
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Add IrisMMU model

JIRA: https://gem5.atlassian.net/browse/GEM5-790

Change-Id: Ida4ec76df5f6192e34a5b3fc6d002c473d48b387
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35415
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Add generic BaseMMU

This is an abstract class encapsulating the ITB and DTB
(Instruction and Data TLBs)

JIRA: https://gem5.atlassian.net/browse/GEM5-790

Change-Id: I7c8fa2ada319e631564182075da1aaff517ec212
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34975
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Replace call to `tmpnam()` by a deterministic one

According to the documentation, the use of tmpnam() should be
avoided.

This commit generates a temporary filename by concat-ing the
object name with an index that is internally tracked, the index
is increased until a filename that is not being used is found.

JIRA: https://gem5.atlassian.net/browse/GEM5-206

Change-Id: Ibfe604d741b6b7d7b02fc051add217f95f81d05e
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35195
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Add recursion for DTB entry generation inside BaseCPU

Change-Id: Ice93b67ee44a1228120f8a63ad5b9d952f813c70
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35556
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add recursion for DTB entry generation inside ArmISA

In order to generate the ArmPMU's DTB entry, we have to enable recursion
from the ArmISA.

This commit follows this mailing list entry:
https://www.mail-archive.com/gem5-users@gem5.org/msg18401.html

Change-Id: I73012755f0f8c8d4d17278793cf16cb1e8b011df
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35555
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Encapsulate CacheBlk's srcRequestorId

Encapsulate this variable to facilitate polymorphism.

- requestorId was renamed to _requestorId and was privatized.
- The requestor ID should only be modified on insertion and
  invalidation; thus, its setter is not public.

Change-Id: I5bab21a6c21e9d912fb5194bb44ff785d44999f4
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34959
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Encapsulate CacheBlk's tickInserted

Encapsulate this variable to facilitate polymorphism.

- tickInserted was renamed to _tickInserted and was privatized.
- The insertion tick should always be set to the current tick,
  and only on insertion; thus, its setter is not public and
  does not take arguments.
- An additional function was created to get the age since of
  the block relative to its insertion tick.
- There is no current need for a getter.

Change-Id: I81d4009abec5e9633e10f1e851e3a524553c98a4
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34958
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Encapsulate CacheBlk's refCount

Encapsulate this variable to facilitate polymorphism.

- refCount was renamed to _refCount and was privatized.
- The reference count should only be reset at invalidation;
  thus, its setter is not public.
- An additional function was created to increment the number
  of references by 1.

Change-Id: Ibc8799a8dcb7c53c651de3eb1c9b86118a297b9d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34957
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Encapsulate CacheBlk's task_id

Encapsulate this variable to facilitate polymorphism.

- task_id was renamed to _taskId and was privatized.
- The task id should only be modified at 2 specific moments:
  insertion and invalidation of the block; thus, its setter
  is not public.

Change-Id: If9c49c22117ef5d7f25163ec94bf8b174f221e39
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34956
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Protect tag from being mishandled

Make the tag variable private, so that every access to it must pass
through a getter and a setter. This protects it from being incorrectly
updated when there is no direct match between a tag and a data entry,
as is the case of sector, compressed, decoupled, and many other table
layouts.

As a side effect, a block matching function has been created, which
also depends directly on the mapping between tag and data entries.

Change-Id: I848a154404feb5cbcea8d0fd2509bf49e1d73bd0
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34955
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: only wrap message with positive value

In case we have small TTY, scons failed with wrong testwrap value. Fix
the issue.

Change-Id: I8ec1d55c6856c1e592a57a68067091b796ac84ae
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35596
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: avoid interactive access in non-tty

We saw some strange behavior when building scons without an interactive
TTY. This seems be caused by the control signal set from
curses.initscr() and endwin(). To avoid issues, we should avoid those
operation when running in non interactive situation.

Change-Id: I9cf8e48a786d47d567ba193f0b069f638e8db647
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35595
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Changed gem5 version info for gem5 20.2 dev

Change-Id: I34505c054f1ec83f5da169bfde90702f3da3917e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35439
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

base: Add some error handling to compiler.hh.

Rather than just leaving some macros undefined if none of the scenarios
we checked for match, we should report an error so it's clear what
happened. Otherwise the places the macros are used will just not compile
properly, or worse will silently not work correctly.

Change-Id: Ie010d6b6d1b6a1496a45d9ebc0d75d1c804df12f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35275
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Re-add -Werror for the gem5 20.2 development

This reverts commit 2a4357bfd0c688a19cfd6b1c600bb2d2d6fa6151,
https://gem5-review.googlesource.com/c/public/gem5/+/35455

Change-Id: I10de506658bcad542abbb6d2b4f0c416d55bc121
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35495
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Merge branch 'release-staging-v20.1.0.0' into develop

Change-Id: I3694b251855b969c7bd3807f34e1b4241d47d586

misc: Updated version to 20.1.0.0

Change-Id: Ic7a37581c58caa354eeecab051122116177d0721
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35456
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Removed -Werror for the gem5 20.1 release

While gem5 compiles on all our supported compilers, removing the -Werror
flag on the stable branch ensures that, as new compilers are released
with stricter warnings, gem5 remains compilable.

Change-Id: I9a356472dc4d729a3fef9f1455814c900103bd66
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35455
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Updated CONTRIBUTING.md: 'master' -> 'stable'

The `master` branch is now the `stable` branch. This commit updates
CONTRIBUTING.md accordingly.

Change-Id: Ic5231eda336520e8a7260efac6474b4f0af08c37
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35457
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Add release notes for 20.1

Change-Id: I011ff987e222326dd7f0787c41043578b52b236a
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35375
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Adding missing argument of panic function

panic function call in panicFsOnlyPseudoInst (src/sim/pseudo_inst.cc) needs to be invoked with argument (name).

Jira Issue: https://gem5.atlassian.net/jira/software/c/projects/GEM5/issues/GEM5-786?filter=allissues

Change-Id: Iecacab7b9e0383373b69e9b790fa822d173d29c3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35040
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

ext: Disable range-loop-analysis warnings for pybind11

Change-Id: I9d9e118c1c70c2f6b11260fff31ecd763e491115
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35296
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Fixing token port responses in GPUCoalescer

The is a bug in the GPUCoalescer which occurs in the following
situation:

1) An instruction crosses a page boundary causing multiple TLB requests
to be sent.
2) The TLB responses arrive at different times, causing the vector
memory requests to be sent at different times.
3) The first vector memory request completes before the second vector
memory request arrives at the coalescer.

This caused the coalescer to consider the instruction sequence number
done and return its token. Then the second request would arrive and
complete sending back another token. Eventually this increases the token
count beyond the maximum tripping an assert.

This change keeps track of the number of per-lane requests which are
expected to be sent in the vector memory request by looking at the exec
mask of the instruction. The token is not returned until the expected
number of per-lane requests have been coalesced. This fixes "#7" in the
list of issues in JIRA-300. There are also style fixes for local
variables in code nearby the changes in this CL.

Change-Id: I152fd9397920ad82ba6079112908387e71ff3cce
JIRA: https://gem5.atlassian.net/browse/GEM5-300
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35176
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Kyle Roarty <kyleroarty1716@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs,gpu-compute: Fixes to connect gmTokenPort

When the TokenPort was moved from the GCN3 staging branch to develop the
TokenPort was changed from being the port connecting the ComputeUnit to
Ruby's vector memory port to a sideband port which inhibits requests to
Ruby's vector memory port. As such, it needs to be explicitly connected
as a new port. This changes the getPort method in ComputeUnit to be
aware of the port as well as modifying the example config to connect to
TCPs.

The iteration to connect in the config file was modified since it was
not properly connecting to TCPs each time and Ruby.py does not
explicitly return a list of each MachineType.

Change-Id: Ia70a6756b2af54d95e94d19bec5d8aadd3c2d5c0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35096
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Fix typo in apu_se.py

Change parser.add_options to parser.add_option

Change-Id: I8b0235a1bf9e01e915dec71d85b9da02c477eb34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35175
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Never use a empty byteEnable

The byteEnable variable is used for masking bytes in a memory request.
The default behaviour is to provide from the ExecContext to the CPU
(and then to the LSQ) an empty vector, which is the same as providing
a vector where every element is true.
Such vectors basically mean: do not mask any byte in the memory request.

This behaviour adds more complexity to the downstream LSQs, which now
have to distinguish between an empty and non-empty byteEnable.

This patch is simplifying things by transforming an empty vector into
a all true one, making sure the CPUs are always receiving a non empty
byteEnable.

JIRA: https://gem5.atlassian.net/browse/GEM5-196

Change-Id: I1d1cecd86ed64c53a314ed700f28810d76c195c3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23285
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86: Add byteEnable mask in x86 memhelpers

Next patch will make the byteEnable mandatory in the ExecContext
interface so we need to amend the existing helpers to make them
use generate the boolean vector.

JIRA: https://gem5.atlassian.net/browse/GEM5-196

Change-Id: Ib24550aa1e22049487ef4ec2748b786be456d342
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23529
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch-arm: Using new "raw" memhelpers

JIRA: https://gem5.atlassian.net/browse/GEM5-196

Change-Id: Ie5ea0fc845a8f6d77a5723bacaff25ba04562f9c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23528
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Add raw read/writeMem helpers

With some exceptions (in arm/x86) the standard memory read/write interface
for instructions relies upon the helper functions in

src/arch/generic/memhelpers.hh

which wrap the ExecContext interface.

(readMem, writeMem...)

Those helpers rely on the source/destination data to be provided (as
expected) but not on the size of the transaction. The latter gets
evaluated via the host size of the source/destination data
(sizeof(MemT)).
For this reason some instructions, which are instead using an
incompatible MemT data (as an example, a SIMD operation loading data in
an array of integers), make direct use of the ExecContext interface,
which is simply requesting for a pointer and a number of bytes.
Some other instructions are using the ExecContext interface since the
helpers do not accept a byteEnable argument.

This patch is adding some helpers to address these issues. The idea is
to deprecate direct usage of the ExecContext APIs.
These new wrappers do not work with the type detection mechanism
to evaluate the number of bytes we are accessing.

JIRA: https://gem5.atlassian.net/browse/GEM5-196

Change-Id: I5b822d278bdf325a68a01aa1861b6487c6628245
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23527
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>

arch: Do value-initialization for MemOperand

With this patch we are properly initializing the MemOperand
variable, with value-initialization.
Prior to this patch, the variable was simply default-initialized.
For a native type, this means the variable is undefined.
With value initialization we are sure the variable is not undefined
and the compiler doesn't complain about it.

JIRA: https://gem5.atlassian.net/browse/GEM5-196

Change-Id: I55a5b8f047b8e691529807b61d38f0d47fcfe61e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23526
Tested-by: kokoro <noreply+kokoro@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

tests,misc: Updated TestLib and boot-tests for gzipped imgs

In efforts to reduce storage costs and download times, the images hosted
by us have been gzipped. The TestLib framework has therefore been
extended to decompress gzipped files after download.

The x86-boot-tests are, at present, the only tests which use the gem5
images. These tests have been updated to download the gzipped image.

Change-Id: I6b2dbe9472a604148834820db8ea70e91e94376f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35257
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Wrap a docstring in isa_parser.py.

This brings the ISA parser in line with the style guide. Note that the
docstring needs to be a single string literal for python to consider it
a docstring, and the parser itself needs each line of the docstring to
be a rule in its CFG. We can accomplish both by taking advantage of the
fact that two directly adjacent quoted strings are treated as a single
string literal by python, and by escaping the newline so that they're
actually considered adjacent.

Change-Id: I7f4d252998877808425aafb0159600ba4c3bf9ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35276
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Expose the ObjectFile class to python.

This will make it possible to inspect a binary and determine, for
example, what architecture or operating system it was compiled for.

Change-Id: Ib40f1e1c02448dc5bf084bb0dd98d3767f463fef
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33899
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: SMMUv3, default CMDQ entries to 128

From Linux 587e6c10a7ce89a5924fdbeff2ec524fbd6a124b, SMMUv3
implementations in 64-bit platforms must report a minimum of 128 CMDQ
entries via SMMU_IDR1. Otherwise, the SMMUv3 Linux driver returns -ENXIO.

Change-Id: I304aac1b734515b3077003e8d67cc19730afc67f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35297
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons,python: Add warning for when python3-config is not used

We cannot say for certain whether 'python-config' is python2 or python3,
but this patch will produce a warning if 'python3-config' is not used,
stating that support for python2 will be dropped in future releases of
gem5.

Change-Id: I114da359c8768071bf7dd7f2701aae85e3459678
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35256
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removing gem5/hello_se/ref/simerr

This is not needed in any comparison we make. It was probably added in
error.

Change-Id: Ie771654f73d101d0ef90ca6e2864a7cb684b3919
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34996
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons,python: Add python2-config to PYTHON_CONFIG

PYTHON_CONFIG can be python2-config as well as python2.7-config.

Change-Id: I482cb922fcf26b37f67f2aca392e04968ca144bd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35255
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons,python: Prioritize Python3 for PYTHON_CONFIG

Change-Id: I0ac4d90b93f2e0a9384216f759937f7b0aa23d41
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34899
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

python: Flush the simulation stdout/stderr buffers

Occasionally gem5's stdout/stderr, when run within the TestLib
framework, will be shuffled. This is resolved by flushing the
stdout/stderr buffer before and after simulation.

In addition to this, the verifier.py has been improved to remove
boilerplate gem5 code from the stdout comparison.

Change-Id: I04c8f9cee4475b8eab2f1ba9bb76bfa3cfcca6ec
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34995
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Use the common pseudoInst dispatch function.

Instead of hand invoking each individual pseudo inst. New instructions
added in the future will automatically become available without a lot of
extra hand implementation. It also simplifies the x86 ISA description.

Change-Id: Ibb671dc2656e61679b7ed016c51a6c879e12910a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27789
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Instantiate a single HTM checkpoint at ISA::startup

Change-Id: I48cc71dce607233f025387379507bcd485943dde
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35016
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Allow storing an invalid HTM checkpoint

Commits 02745afd and f9b4e32 introduced a mechanism for creating checkpoint
objects for hardware transactional memory (HTM) and Arm TME. Because the
checkpoint object also contains the local UID of a transaction, it is
needed before any architectural checkpointing takes places. This caused
segfaults when running HTM codes.

This commit allows ISAs to allocate a checkpoint once at the beginning
of simulation.  In order to do that we need to remove the validity check
assertion; the cpt will become valid only after a first successfull
transaction start

Change-Id: I233d01805f8ab655131ed8cd6404950a2bf6fbc7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35015
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

ext: Add timing indications to every TestCase

The log_call helper is now accepting a time parameter (dictionary). If
the param is not None, the function will fill the timing indications
(user and system time) for the TestCase.

There are some TestCases whose user time is not of our interest; for
example we don't really care about the cpu time of a stdout diff
(MatchStdout tests). In those cases the resulting cpu time in the
generated JUnit file (results.xml) will be 0.

JIRA: https://gem5.atlassian.net/browse/GEM5-548

Change-Id: I53c1b59f8ad93900aeac06197e39189c00a9053c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32653
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Fix some reference use in range loops

This change fixes two cases of range loops, one where we can't use
lvalue reference, and one more where we have to use an lvalue
reference as we can't create a copy. In both cases clang would warn.

Change-Id: I760aa094af66be32a150bad37acc21d6fd512a65
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34776
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Update attribute syntax, and reorganize compiler.hh.

This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.

Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.

Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base,mem: Use the standard [[deprecated]] attribute.

The [[deprecated]] attribute is now standard, and so we don't need to
wrap it in our own macro any more.

Change-Id: I363df9a9c6b820dee8c21b1716335c0d15fbc62d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35216
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: make ExecSymbol show the symbol in addition to address

Before this commit, ExecSymbol would show only the symbol and no address:

0: system.cpu: A0 T0 : @_kernel_flags_le_lo32+6    :   mrs   x0, currentel

After this commit, it shows the symbol in addition to the address:

0: system.cpu: A0 T0 : 0x10 @_kernel_flags_le_lo32+6    :   mrs   x0, currentel

Change-Id: I665802f50ce9aeac6bb9e174b5dd06196e757c60
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35077
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base,dev: Use the standard attribute [[noreturn]].

The [[noreturn]] attribute has been standard since c++11, and so we
don't (and haven't for a while) need to wrap it in a macro.

Change-Id: Ifba62c87c19224bb366e93ebba685a063cc750ce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35218
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch,base,cpu,dev: Get rid of the M5_DUMMY_RETURN macro.

This macro probably would have been defined to "return" in some cases,
to be put after a call to a function that doesn't return so that the
compiler wouldn't think control would reach the end of a non-void
function. It was only ever defined to expand to nothing, and now that
[[noreturn]] is a standard attribute, it should never be needed going
forward.

Change-Id: I37625eab72deeaede77f9347116b9fddd75febf7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35217
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm,base,gpu: Use std::make_unique instead of m5::make_unique.

Now that we're using c++14, we can just assume that std::make_unique
exists. We no longer have to conditionally inject our own version.

Change-Id: I5d851afb02dd05c7af93864ffec3b3184f3d4ec8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35215
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base,sim: implement a faster mutex for single thread case

This change applies an atomic variable to check if we really need to
obtain a mutex, and uses a condition variable to notify.

See about 5% improvement in the simulation speed.

Change-Id: I7e165987dcb587b27fae90978b9b3fde6f5563ef
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34915
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: When loading an image directly in memory, use the right CL size.

Some code was added fairly recently which would load a memory image
into a memory directly in order to make it easier to set up ROMs.
Unfortunately, that code accidentally used the image size instead of
the cache line size when setting up the port proxy which would actually
write the data. This happens to work when the image size is a power of
two since that's all the proxy checks for, but there's no guarantee
that every image will be sized that way.

This change instead looks into the system object, retrieves the cache
line size from it, and uses that to set up the port proxy.

Change-Id: I227ac475b855d9516e1feb881769e12ec4e7d598
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35155
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Remove check whether the System port is connected.

The port will report an error if something tries to use it and
it's not connected. If it isn't needed, there's no reason to force
users to hook something up to it just to satisfy the check.

Change-Id: I0668b8a86c8cb323aba51670fb7914d35acc5198
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34815
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

base: When creating an ELF file memory image, ignore empty segments.

Sometimes ELF files have segments in them which are marked as loadable,
but which actually have zero size in memory. When setting up a memory
image we should drop those to avoid confusing other code which tries
to find the footprint of a memory image. No part of these segments,
including their starting address or ending address, need to actually
land on top of memory since they don't actually contain any data.

Change-Id: If8b61d10db139e0f688b6ceabcb8e6a898557469
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35156
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Set kvm_map in DRAMInterface in Ruby.py

The kvm_map parameter from AbstractMemory has been moved from MemCtrl
(formerly DRAMCtrl) to DRAMInterface. Assign it to DRAMInterface
instead.

Change-Id: I4508aefcf5eb859d9ffe05c81d85a1b84ee0a196
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35095
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

ext: Monkeypatch os.waitpid to extract CPU time from subprocess

Added utility class `TimedWaitPID` which monkey-patches os.waitpid()
with a functor that has the same signature, but calls os.wait4()
instead. This allows the process's user and system CPU time to be
obtained from the OS when using APIs (such as subprocess) which use
os.waitpid() internally.

The process CPU time is stored within the functor and can be read back
later by calling TimedWaitPID.get_time_for_pid().

JIRA: https://gem5.atlassian.net/browse/GEM5-548

Change-Id: I9ebe9ca1241a4f28c90ad31f672f32ac52786664
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32652
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>

misc: Merge branch 'release-staging-v20.1.0.0' into develop

Change-Id: I656a2d9512b1822a7e8d82606da7a0a5504d6820

base: Minor cleanup of the ChunkGenerator.

Minor style fixes, switched to Addr for some types so they'll definitely
be large enough.

Change-Id: I985004116c48ce6fb236c04e04fe54ed49a68277
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34177
Reviewed-by: Steve Reinhardt <stever@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Update the IRIS ThreadContext base class.

The syscall() method has been removed, and HTM related methods have
been added.

Change-Id: I796c1a554bfd4b1ee01a62c9c7ad403dd699cc0f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35038
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm,fastmodel: Update the VExpressFastModel to use ArmInterruptPins.

The HDLCD device now uses an ArmInterruptPin instead of a GIC and
interrupt number parameter.

Change-Id: I31122e66a1c18f61592f3dca214ee057baad8f88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35039
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Update for the isa_traits.hh changes.

arch/arm/isa_traits.hh no longer has using namespace ArmISA, and also
no longer directly or indirectly provides interrupt number related
constants.

Change-Id: Ieda31d1db4f85632a555b2f72ee8bff0aa159eee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35037
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

gpu-compute: set exec_mask for permute,bpermute instructions

This change sets gpuDynInst->exec_mask for permute and bpermute
instructions, fixing a bug where they would never write their data.

permute and bpermute instructions are load instructions that write
to a VGPR. Because of that, they use gpuDynInst->exec_mask when
checking what lanes should write to the VGPR.

gpuDynInst->exec_mask gets set to wf->execMask() as that is what other
load instructions that write to VGPRs do.

Change-Id: Ie443283488cbd2ab9c17fc255e7cc44418353419
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35036
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

gpu-compute: replace uint32_t* casts with bits API calls

The uint32_t* casting was challenging to fully understand what was
being done at a glance. Replaced with calls to various bits functions
as it's functionally equivalent and much more clear.

This also fixes a segfault in GPUInitAbi DPRINTFs from a mis-typed
uint32_t* cast.

Change-Id: Id5d1863942848dd7a9e5e17e8180c33adbc72f15
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34677
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>