btrfs-progs: bump to version 3.18

Backtrace is disable by default now so remove the definition to avoid
duplicate warnings.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

upmpdcli: add missing comment dependency propagation

upmpdcli cannot be built with the Blackfin toolchains, but the comment
could be shown with such toolchains, which doesn't make sense. This
commit properly propagates the toolchain exceptions of the package
config symbol to the Config.in comment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libupnp: mark as broken on Nios II, infamous _gp issue

Fixes:

  http://autobuild.buildroot.org/results/bc3/bc32c15ba569e700e401ddf97faba584fc16c4cc/

The real error is in the config.log:

configure:15081: checking for UpnpInit in -lupnp
configure:15106: /home/thomas/projets/buildroot/output/host/usr/bin/nios2-linux-gnu-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64   -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  c
onftest.c -lupnp  -lpthread -lrt  >&5
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/4.8.3/../../../../nios2-linux-gnu/bin/ld: /home/thomas/projets/buildroot/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/crt1.o: undefined reference to symbol '_gp'
/home/thomas/projets/buildroot/output/host/usr/nios2-buildroot-linux-gnu/sysroot/usr/lib/libthreadutil.so.6: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
configure:15106: $? = 1
[...]
configure:15125: error: libupnp not found

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: add support for Nios II

This commit adds a patch to libsigsegv that indicates the stack
direction on Nios II, which is needed for libsigsegv to build properly
on this architecture.

Fixes:

  http://autobuild.buildroot.org/results/943/9436c3208cfeee9bd3bc211df007e745fe13c2c2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: rename patches to the new convention and convert to Git format

This commit renames the libsigsegv patches to the new convention, and
converts them to Git formatted patches. Along the way, it also aligns
the description of the different patches, in a preparation for
upstream submission.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: fix missing link against librt

Add a patch to bluez5_utils to make sure that the mcaptest tool gets
linked against librt, since it uses clock_getres().

Fixes:

  http://autobuild.buildroot.org/results/2b1/2b1e521422d9af2b13133323c6534c49fbb0e177/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bluez5_utils: bump to version 5.27

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

oprofile: cleanup the style of the OPROFILE_BINARIES definition

There is no need to repeat OPROFILE_BINARIES += many times to add more
values to the variable. Just define it once with all the values, as we
do everywhere else in Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

oprofile: autoreconf is no longer needed

OPROFILE_AUTORECONF = YES was added in commit
99fc6299dbceaf6d58be2fb516a346451968a704 ("oprofile 0.9.8: fix
compilation on powerpc") together with a patch touching
configure.ac. However, since then, OProfile was bumped to 0.9.9 and
then 1.0.0, and through those bumps, all patches touching configure.ac
and .m4 files have been removed since they have been merged
upstream. AUTORECONF = YES is therefore no longer necessary, and an
OProfile build was successfully tested with autoreconfiguring the
package.

We can also remove the OPROFILE_CREATE_FILES post-patch hook, which
was only needed to create files required by the autoreconf process.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

oprofile: fix nanosleep() issue on non-threaded toolchains

This commit adds a patch to OProfile that ensures <time.h> is included
whenever nanosleep() is used, which fixes a build failure on uClibc
toolchains with no thread support.

Fixes:

  http://autobuild.buildroot.org/results/d28/d28447c1241ce3dd237710e388d799139d7d613d/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntp: fix hash file

Add a space between the hash and filename so the hash can be used.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

links: bump to version 2.9

Fixes:
http://autobuild.buildroot.net/results/d95/d95daf56e23944d0b24d38dab949a196a89efcf3/
http://autobuild.buildroot.net/results/f40/f407067f6504b7e4eaf6001828c5d073a21ccd96/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libiio: fix static build

Use the CMake module provided by libxml2 instead of the one from CMake to
correctly set the cflags and ldflags.

Fixes:
  http://autobuild.buildroot.net/results/964f98fafdcd7e994ea25cf0993915d81537c31c/

Note that this patch needs the following one to be merged in libxml2:
  https://mail.gnome.org/archives/xml/2014-December/msg00015.html

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libxml2: fix libxml2-config.cmake

This patch aligns the libxml2-config.cmake module to what the libxml-2.0.pc set.

This patch has already been sent upstream:
  https://mail.gnome.org/archives/xml/2014-December/msg00015.html

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnftnl: add patch to fix libnftnl.pc for static linking

This commit adds a patch to libnftnl to add the Libs.private field in
the pkg-config file, which is needed for proper static linking of
applications using libnftnl.

Fixes the build of programs such as nftables on Blackfin:

  http://autobuild.buildroot.org/results/061/06166344cc8e162d3f901c70ee31ce07e481053e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnftnl: rename patch to new convention, use Git formatted patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.9.0-2

[Peter: use correct sha256sum]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mke2img: always create sparse files

When the user specifies a number of blocks (and we do not auto-compute
them), the generated filesystem can be quite large with large zones with
only zeroes in them.

Thus, always create the filesystem as a sparse file.

Sparse files behave the same as normal files, except those long runs of
zeroes do not actually use space on the (host) filesystem. Also, this
should not break current behaviour, as neither cp nor dd nor cat preserve
sparseness by default. So users relying on the zeroed parts to actually
be written won;t see a change. Users that were expressly using cp or dd
to copy files to a sparse destination will however see a little bit of
improvements, as the zeroed out parts won't even be read from disk.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freerdp: pass appropriate ARM ABI flags

In the line of commit 530693787b3 ("package/freerdp: do not use Neon
extensions when not available") done by Yann E. Morin, freerdp also
passes an explicit -mfloat-abi= flag, and defaults to softfp. This
obviously breaks badly when building an EABIhf system.

This commit therefore fixes freerdp.mk to pass the appropriate
ARM_FP_ABI value to freerdp's build system.

Fixes:

  http://autobuild.buildroot.org/results/6ca/6ca9de1a11c675533baa68f7a6bf7b6af7cb4345/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: bump to 7.8.1

This commit bumps to 7.8.1, and updates the logic to use .tar.xz
tarballs so that it applies to all 7.8.x versions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: bump to version 1.23.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

chrony: bump version

And add hash file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-libav: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-ugly: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-good: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-base: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: add hashes for Blackfin toolchains

Those toolchains are downloaded from Sourceforge, and are therefore
affected by the Sourcefoge download issues. Therefore, this commit
adds the hashes for those toolchain tarballs.

Fixes:

  http://autobuild.buildroot.org/results/fa5/fa5e38246dddd661f1d674f3521d21297796bce3/
  (and other similar issues)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: add hashes for SourceForge-hosted packages

Since SourceForge sometimes serves us faulty tarballs, we can tons of
autobuild failures:
    http://autobuild.buildroot.org/results/9fb/9fba5bf086a4e7a29e5f7156ec43847db7aacfc4/
    http://autobuild.buildroot.org/results/6c8/6c837b244c45ac3b3a887734a371cd6d226cf216/
    ...

Fix that by adding hash files for all SourceForge-hosted packages (thos
etht did not already have it).

We normally prefer to use hashes published by upstream, but hunting them
all one by one is a tedious task, so those hashes were all locally
computed with a script that searched for SF-hosted packages, downloades
the associated tarball, computed the hash, and stored it in the
corresponding .hash file.

Also, SF publishes sha1 hashes, while I used the stronger sha256, since
sha1 is now considered to be relatively weak.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lm-sensors: disable static library for shared-only build

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: fix leftover instance of 'xbmc'

During the XBMC -> Kodi rename, some instance of 'xbmc' were left out,
which meant our startup script would not run Kodi, and that Kodi would
create its /.kodi directory.

This patch renames the missing bits.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu: update to the latest kernel/headers versions

Used to test the new default binutils 2.24 (all passed).
Also update the virtex readme since the dtb is in output/images as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

whois: bump to version 5.2.3

With support for new gTLDs and updated TLDs.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dillo: bump to version 3.0.4.1

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

links: bump to version 2.8

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mke2img: do not overshoot user-specified size

Currently, we forcibly expand the generated filesystem by 1300 blocks
(i.e. a bit more than 1MiB) when we need to generate an ext3 or ext4
filesystem, even if the user already supplied us with the size it wants
the filesystem to be.

In that case, we overshoot what the user requested, which is bad because
the filesystem may no longer fit in the partition it is supposed to be
written into.

Only add extra blocks when we do compute the required size, not when the
user specifies the size.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sdparm: bump to version 1.09

Also add hash file.
And make the libsgutils2 support (from sg3_utils) deterministic.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: default to 2.24

2.22 is getting quite old (Nov 2011) and we've recently added 2.25. 2.24 has
been used for the "new" architectures for a while and there's no known
issues going to 2.24 for the rest, so bump the default version.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iproute2: bump to version 3.18.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tmux: remove unsafe headers path

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lftp: don't use host's path

lftp try to link with -L/usr/lib/lftp/$(LFTP_VERSION) if
DESTDIR is not set.

Remove useless -L option which point to a location where
no libraries are installed.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: fix support for xserver with Vivante drivers

[Thomas: fix minor typo in patch description.]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gpu-viv-bin-mx6q: fix GLESv2 support

Tested with:
    QMX6 board +
    BR2_TOOLCHAIN_EXTERNAL=y
    BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
    BR2_LINUX_KERNEL=y
    BR2_LINUX_KERNEL_CUSTOM_GIT=y
    BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_kernel.git"
    BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="9bafbcba67f7bb2a48a5e05998cecb1165aa444f"
    BR2_LINUX_KERNEL_DEFCONFIG="qmx6"
    BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
    BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
    BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6"
    BR2_PACKAGE_QT5=y
    BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y
    BR2_PACKAGE_QT5BASE_EXAMPLES=y
    BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
    BR2_PACKAGE_QT5BASE_EGLFS=y
    BR2_PACKAGE_QT5BASE_DEFAULT_QPA="eglfs"
    BR2_PACKAGE_QT5BASE_GIF=y
    BR2_PACKAGE_QT5BASE_JPEG=y
    BR2_PACKAGE_QT5BASE_PNG=y
    BR2_PACKAGE_QT5QUICKCONTROLS=y
    BR2_PACKAGE_FREESCALE_IMX=y
    BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
    BR2_PACKAGE_GPU_VIV_BIN_MX6Q=y
    BR2_PACKAGE_GPU_VIV_BIN_MX6Q_EXAMPLES=y

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libvncserver: add config option for tightpng encoding support

TightPNG encoding speeds up HTML5 based VNC clients like noVNC.
libvncserver enables this encoding if both libpng and jpeg libraries
are available.

[Thomas: rewrap Config.in help text.]

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gpu-viv-bin-mx6q: use self-extractible helper

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: do not use SSE2 extensions when not available

Do not let FreeRDP decide whether it can use SE2 opcodes, it may well
fail to do so, because the heuristic is not working for
cross-compilation.

Also, we do have a Kconfig option stating whether we have SSE2 or not,
so reuse that.

Similar to the recent ARM+Neon fix.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: do not use Neon extensions when not available

FreeRDP mis-detects the CPU, and may enable Neon extensions when it
should not. Not all ARM processors have Neon extensions.

Heck, what's more, none non-ARM processor has Neon extensions!
The regexp to detect the CPU is borked:  'arm*'  will also match 'arc'
as well as 'arm'.

Do not let FreeRDP try to decide if it can use Neon extensions, we have
a Kconfig option for that, that we can use to force FreeRDP to use it or
not.

Should fix:
    http://autobuild.buildroot.org/results/d4a/d4a61e686cf11d993d02ece0c4e2835a926603c2/
    http://autobuild.buildroot.org/results/234/2349d40ef8d658ab1cd7332eb1b42a75afcd423f/
   ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: update hash

Last bump (dd3a2d6) forgot to update the hash for the new version.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: Add Kodi patchset

In the past xbmc delivered its own ffmpeg source code with specific patches to
address bugs found during the use of xbmc. For Helix the ffmpeg source code was
removed, Helix uses a vanilla ffmpeg source tarball and applies this patchset
on top of it.

Downloaded from
https://github.com/xbmc/FFmpeg/compare/FFmpeg:release/2.5...release/2.5-xbmc.patch

[Thomas: use individual patches instead.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-wav: New package

[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-vorbis: New package

[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-lame: New package

[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-flac: New package

[Thomas: removed dependency on BR2_PACKAGE_KODI_OPTICALDRIVE from the
package Config.in, since it is already only included if
BR2_PACKAGE_KODI_OPTICALDRIVE is enabled.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: Enable install to STAGING_DIR, needed for audioencoder addons

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: New option to enable support for optical drives

This also enables dvdcss support, provided by an internal library.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-addon-xvdr: Bump version for Helix-compatibility

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xbmc-addon-xvdr: rename to kodi-addon-xvdr

Following the rename of the XBMC project to Kodi, this commit renames
the xbmc-addon-xvdr package to kodi-addon-xvdr, and adds the
appropriate Config.in.legacy handling.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-pvr-addons: Bump version for Helix-compatibility

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xbmc-pvr-addons: rename to 'kodi-pvr-addons'

Following the rename of the XBMC project to Kodi, this commit renames
the xbmc-pvr-addons package to kodi-pvr-addons, and adds the
appropriate Config.in.legacy handling.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: Bump version to 14.0-Helix

- delete 0002-mathutil.patch, committed upstream
- delete 0003-dbus.patch, committed upstream
- add dependency to ffmpeg, xbmc does not deliver its own ffmpeg anymore
- remove dependency to flac & lame, audio encoders have been seperated from kodi

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xbmc: rename to 'kodi', the new upstream project name

Background information: http://xbmc.org/introducing-kodi-14. In a
first step to bump version to 14.0-Helix, we move the xbmc package to
a new directory called kodi.

Appropriate Config.in.legacy variables are added.

[Thomas: rename patches to the new convention.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libvncserver: disable libva support

The libvncclient library (part of libvncserver) has optional support
for HW accelerated H264 video playback using libva

However there are currently two problems with it:

1) it only supports libva compiled with X11 support enabled, but it
   does not verify that is the case, resulting in compile errors.

2) it only supports the libva 1.0.x API, and not newer
   libva versions, like 1.4.x we include with buildroot.

   https://github.com/LibVNC/libvncserver/issues/11

Disabling libva support for now.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xerces: make sure to use the cross-compiled curl

When curl support is enabled in xerces, and a host curl is available
on the system, it might try to use it, so this patch adds --with-curl=
to the configure options to explicitly indicate where is the curl
library to use.

Should fix:

  http://autobuild.buildroot.org/results/c3c/c3c6be45d0f764fb931a46dbf1509ccf2916ecbf/

  (We were not able to reproduce specifically this problem, but
  another similar problem, where curl was detected, but considered as
  non-working because of the compilation failure of a test program.)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libxmlrpc: improve curl-config patch

The curl-config patch that makes sure to not use curl-config from the
PATH but the curl-config program specified at configure time was
forgetting a number of other places. So we change the strategy, and
make the configure.in script define a $CURL_CONFIG variable that can
be used in Makefiles where appropriate.

This means we need to run autoconf (but not AUTORECONF = YES since the
package uses autoconf but not automake).

This fixes build failures in cases where a curl-config program is in
the PATH. Fixes:

  http://autobuild.buildroot.org/results/06b/06b7eada721483eb57adde147768a1f306b7d0d7/
  (and many similar ones)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libxmlrpc: bump to 1.25.30 and add hash file

This commit bumps libxmlrpc to the latest available stable version,
and adds a hash file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/libxkbcommon: fix builds with/without X11

We need to explicitly disable X11 support when X11 is not available.
Conversely, when it is, we need to add the required dependencies.

Fixes a slew of autobuild failures:
    http://autobuild.buildroot.org/results/587/58794f894a4950b77e38d5fc877852d6cc507d8c/
    http://autobuild.buildroot.org/results/927/92741f6b9b7909b226c200e453ac6cee8af5abd6/
    http://autobuild.buildroot.org/results/51c/51cb09f7f267319948c685f905e29afe99f59589/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libiio: do not force shared object build

libiio correctly builds as a static library, there is no obvious reason
to force the shared object build.

So, let the CMake BUILD_SHARED_LIBS variable handles the type of library
built.

This libiio patch has already been submitted upstream:
  https://github.com/analogdevicesinc/libiio/pull/6

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxmlrpc: rename patches to the new convention

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

guile: fix libltdl, libgmp and libunistring detection

Explicitly pass the path to libtldl, libgmp and libunistring, so that
guile does not try to use host versions when available.

Fixes:

  http://autobuild.buildroot.org/results/056/056b7fcbf3b73a8d15ca635b000771cdc2d7fbf9/

And another similar problem with libgmp and libunistring.

[Thomas: added --with-libunistring-prefix, as suggested by Samuel
Martin.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>

package/leafnode2: fix news user check

--enable-runas-user use 'news' as default but the configure stop
if news doesn't exist on the build host.
Use 'root' while cross-compiling

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nftables: do not build docs

Building docs requires dblatex with a working Jade Wrapper (jw) which
may well be missing on the build machine, and we do not build our own.

Since docs are anyway removed from the target, just do not build them.

Tell ./configure that we do not have the required tools:
  - DBLATEX=no to disable PDF generation
  - DOCBOOK2X_MAN=no, DOCBOOK2MAN=no and DB2X_DOCBOOK2MAN=no to disable
    manpage generation

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kismet: Fix static build

Use pcap-config to list optional libpcap dependencies needed for static
link. Otherwise we will see errors like this one:

/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libpcap.a(pcap-canusb-linux.o):
In function `canusb_close':
pcap-canusb-linux.c:(.text+0xec): undefined reference to `libusb_close'

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[yann.morin.1998@free.fr: remove the ncurses bits (done differently in
 another patch), fix BR2_PREFER_STATIC_LIB -> BR2_STATIC_LIBS]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kismet: do not use host headers

kismet's ./configure hard-codes host paths in its include search paths.
Fix that by removing the offending paths.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kismet: fix ncurses static build

Says Vicente:
    [T]he order is very important when doing static builds.
    Otherwise we will see errors like this one:

    [...]/sysroot/usr/lib/libpanel.a(p_delete.o):
    In function `del_panel':
    p_delete.c:(.text+0x68): undefined reference to `_nc_panelhook'

Fix the order configure adds libraries: new libraries should be added
at the *front* of the list, not at the end.

Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: Add an option to compile 'nsenter' binary.

nsenter is a tool to enter the namespace of another process.

[Thomas: add dependency to 3.0 kernel headers, since the setns()
system call was added in Linux 3.0.]

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libvncserver: bump version to 0.9.10

[Thomas:
 - add comment about AUTORECONF = YES, noticed by Baruch Siach, and
   suggested by Yann E. Morin.
 - add dependency on host-pkgconf, since the configure script uses
   PKG_CHECK_MODULES.]

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: remove hash file of the non-existing package

Added accidentally in 1e93aa4b9973c24cb16446b2373c222d512eb2e5.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxkbcommon: bump to version 0.5.0

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/f2fs-tools: furthe endianness fixes

Add appropriate checks in configure.ac.

Fixes a slew of autobuilder failures:
    http://autobuild.buildroot.org/results/cf6/cf6f5b6981694f74bfca45b3d04ff35e4226b162/
    http://autobuild.buildroot.org/results/b34/b346472e686af5b517b689217349eab21878bb7b/
    http://autobuild.buildroot.org/results/49a/49a6a2a88cac6e0899f271a5e65c78dd9eb2eab4/
    ...

Note: patches sent upstream, awaiting for reply...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ntp: fix installation

Since 5d5c9a8 (ntp: security bump to version 4.2.8), scripts/ntp-wait
and scripts/ntptrace are no longer scripts themselves, but directories
containing those scripts.

Fixes:
    http://autobuild.buildroot.org/results/518/5189e84004bf28b891da3ee07fecc8717b4e8e8c/ (ntp-wait)
    http://autobuild.buildroot.org/results/005/0056192a06d44814a0279637c4bcbf602936e7ff/ (ntptrace)
    http://autobuild.buildroot.org/results/8f3/8f372acf73743edf8027cda6865ba1aa7b6413a3/ (both)
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: clarify comment on .br-external handling

The comment language may lead the reader to think that .br-external is removed
whenever BR2_EXTERNAL is not set in the command line. Make it clear that
BR2_EXTERNAL must be explicitly set to an empty value for .br-external to get
removed.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bdwgc: add patch automatically detecting for NO_GETCONTEXT need

This patch is necessary to successfully build guile with toolchain
missing support for getcontext.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: add a comment, change variable name, use
 AS_IF, remove debug traces, use AC_CHECK_FUNCS (Thomas)]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/guile: needs libtool

guile build-depends on libtool, but forgot to select it Kconfig.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: fix breakage from d4b2b032a00c9922c9efa144b014dc086a7e48f1

Unbreak qemu_xtensa_lx60_defconfig where LINUX_IMAGE_NAME !=
LINUX_TARGET_NAME.
It incorrectly overwrites LINUX_IMAGE_NAME even if it was set before,
defeating the purpose of IMAGE being different than TARGET.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dhcpcd: bump to version 6.6.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: add version 2.25

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpng: security bump to version 1.6.16

Fixes a buffer overflow which may allow an attacker to gain write
access to memory.
CVE requested but not yet assigned.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gettext: bump to version 0.19.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/perl-gd: Add a new option to set the path to gdlib-config

The build of perl-gd use the gdlib-config from the host that in result
incorect features enabled, incorrect header and library paths.

Should fixes:
http://autobuild.buildroot.net/results/15c/15ce69b916167305aba2820a157c880e487ee8c7/
http://autobuild.buildroot.net/results/504/504d64d992eb504e02c127feb4734a917ad95d0a/
http://autobuild.buildroot.net/results/551/5512213c8861e51b390c1c223d53add0ec1ed758/

And many more.

Note:
In the generated Makefile, LDFLAGS still contains "-L/usr/local/lib"

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luaposix: bump to version 33.0.0

ncurses becomes a mandatory dependency

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-coatpersistent: bump to version 0.2.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-coat: bump to version 0.9.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-csnappy: bump to version 0.1.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lpeg: bump to version 0.12.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luafilesystem: rename patch to the new convention

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua: rename patches to the new convention

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

f2fs-tools: add big-endian fixes/patches from upstream

Fixes:
http://autobuild.buildroot.net/results/8f9/8f97186489134619de7086028a59523d528b0d51/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>