i965/fs: Return zero from fs_inst::components_read for non-present sources.

This makes it easier for the caller to find out how many scalar
components are actually read by the instruction.  As a bonus we no
longer need to special-case BAD_FILE in the implementation of
fs_inst::regs_read.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Lower TEX to TXL during NIR translation.

This simplifies the code slightly and will allow the SIMD lowering
pass to find out easily what the actual texturing opcode is in order
to determine the maximum execution size of texturing instructions.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

freedreno/a3xx: fix generic clear path

Signed-off-by: Rob Clark <robdclark@gmail.com>

st/mesa: use pipe var instead of st->pipe in st_create_context_priv()

As is done in most other places in the function.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: remove unused u_clear.h file

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/i915: inline the util_clear() code into i915_clear_blitter()

This is the only place the util_clear() function was used.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/util: minor reformatting in u_box.h

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

svga: remove unused var in svga_mark_surfaces_dirty()

Signed-off-by: Brian Paul <brianp@vmware.com>

svga: avoid a calloc in svga_buffer_transfer_map()

Just initialize the two other pipe_transfer fields explicitly.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: don't call os_get_time() when not needed by Gallium HUD

The calls to os_get_time() were showing up higher than expected in
profiles.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: remove unneeded memset() call in draw_vgpu10()

All three fields of the vbuffer_attrs[] array are assigned in the following
loop.  The remaining elements of the array are not used.

Tested with full Piglit run, Heaven 4.0, etc.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: reduce looping in svga_mark_surfaces_dirty()

We don't need to loop over the max number of color buffers, just the
current number (which is usually one).

Tested with full Piglit run, Heaven 4.0, etc.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: minor clean-ups in define_rasterizer_object()

Add const qualifiers, new comment.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: remove incorrect buffer invalidation code

Fixes regression with team_fortress_2 trace.
This change has been in our in-house tree for some time.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: additional comments for svga_hw_draw_state members

And re-order a few fields.

Signed-off-by: Brian Paul <brianp@vmware.com>

svga: use the sws local var to simplify some code

Signed-off-by: Brian Paul <brianp@vmware.com>

svga: minor whitespace and code clean-ups

Signed-off-by: Brian Paul <brianp@vmware.com>

freedreno/a4xx: use generic clear path

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a3xx: use generic clear path

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: support for using generic clear path

Since clears are more or less just normal draws, there isn't that much
benefit in having hand-rolled clear path.  Add support to use u_blitter
instead if gen specific backend doesn't implement ctx->clear().

Signed-off-by: Rob Clark <robdclark@gmail.com>

gallium/u_blitter: split out a helper for common clear state

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/u_blitter: add helper to save FS const buffer state

Not (currently) state that is overwridden by u_blitter itself, but
drivers with custom blit/clear which are reusing part of the u_blitter
infrastructure will use it.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/u_blitter: export some functions

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

egl/dri2: dri2_make_current: Release previous context's display

eglMakeCurrent can also be used to change the active display. In that
case, we need to decrement ref_count of the previous display (possibly
destroying it), and increment it on the next display.

Also, old_dsurf/old_rsurf cannot be non-NULL if old_ctx is NULL, so
we only need to test if old_ctx is non-NULL.

v2: Save the old display before destroying the context.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97214
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reported-by: Alexandr Zelinsky <mexahotabop@w1l.ru>
Tested-by: Alexandr Zelinsky <mexahotabop@w1l.ru>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>

st/vdpau: change the order in which filters are applied(v3)

Apply the median and matrix filter before the compostioning
we apply the deinterlacing first to avoid the extra overhead
in processing the past and the future surfaces in deinterlacing.

v2: apply the filters on all the surfaces (Christian)
v3: use get_sampler_view_planes() instead of
    get_sampler_view_components() and iterate over
    VL_MAX_SURFACES (Christian)

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

glcpp: Update tests for new #undef of built-in macro rules.

Ian recently changed the preprocessor to allow this in most GLSL
versions, but not GLSL ES 3.00+.  This patch converts the existing
test that expects a failure to a #version 300 es shader, and adds
a #version 110 shader to make sure that it's allowed.

Fixes 'make check'.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97307
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>

anv: fix writemask on blit fragment shader.

I'm not sure if anything even uses this, but I found this on radv, so
just fix it on anv for consistency.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

egl/android: Set dpy->DriverData to NULL on error

Avoid use-after-free on error.

Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/drm: Set disp->DriverData to NULL on error

Avoid use-after-free on error.

Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/surfaceless: Set disp->DriverData to NULL on error

Avoid use-after-free on error.

Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/wayland: Set disp->DriverData to NULL on error

Avoid use-after-free, fix spec@egl_khr_fence_sync@conformance.

Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reported-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/x11: avoid using freed memory if dri2 init fails

Found with valgrind:

==4841== Invalid read of size 4
==4841==    at 0x56BDC80: dri2_initialize (egl_dri2.c:783)
==4841==    by 0x56BAFE5: _eglMatchAndInitialize (egldriver.c:261)
==4841==    by 0x56BB15E: _eglMatchDriver (egldriver.c:295)
==4841==    by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841==    by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x402E59: main
==4841==  Address 0x6a05824 is 148 bytes inside a block of size 480 free'd
==4841==    at 0x4C2B680: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==4841==    by 0x56C2AAE: dri2_initialize_x11_swrast (platform_x11.c:1233)
==4841==    by 0x56C2AAE: dri2_initialize_x11 (platform_x11.c:1493)
==4841==    by 0x56BDCEB: dri2_initialize (egl_dri2.c:805)
==4841==    by 0x56BAFAF: _eglMatchAndInitialize (egldriver.c:261)
==4841==    by 0x56BB0C9: _eglMatchDriver (egldriver.c:292)
==4841==    by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841==    by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x402E59: main
==4841==  Block was alloc'd at
==4841==    at 0x4C2A868: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==4841==    by 0x56C2A47: dri2_initialize_x11_swrast (platform_x11.c:1171)
==4841==    by 0x56C2A47: dri2_initialize_x11 (platform_x11.c:1493)
==4841==    by 0x56BDCEB: dri2_initialize (egl_dri2.c:805)
==4841==    by 0x56BAFAF: _eglMatchAndInitialize (egldriver.c:261)
==4841==    by 0x56BB0C9: _eglMatchDriver (egldriver.c:292)
==4841==    by 0x56B58C9: eglInitialize (eglapi.c:480)
==4841==    by 0x4F537DC: _glfwInitEGL (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F4BEFB: _glfwPlatformInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x4F46F40: glfwInit (in /usr/lib64/libglfw.so.3.2)
==4841==    by 0x402E59: main

Signed-off-by: Jan Ziak (http://atom-symbol.net) <0xe2.0x9a.0x9b@gmail.com>
Fixes: 9ee683f877 (egl/dri2: Add reference count for dri2_egl_display)
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

anv: add genX_multisample.h to the sources list(s).

Otherwise it won't end up in the release tarball.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

anv/x11: Add support for Xlib platform

Some applications continue to use the Xlib client library and expect that
VK_KHR_xlib_surface will be available in the driver. Service these
applications by converting the Display pointer to xcb_connection_t and use
the existing xcb code in the driver.

Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

glx: apple specific occurences of dummyContext check

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Cc: Jeremy Huddleston Sequoia <jeremyhu@apple.com>

glx: fix error code when there is no context bound

v2: change all related NULL checks to check against dummyContext
v3: really check for dummyContext *only* when ctx was from
    __glXGetCurrentContext
v4: cover more checks, add dummyBuffer, dummyVtable (Emil)

Signed-off-by: Bernard Kilarski <bernard.r.kilarski@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "11.2" <mesa-stable@lists.freedesktop.org>

mesa: Remove duplicate include.

In api_validate.c stdbool.h was included twice.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

vbo: Remove always true return from vbo_bind_arrays.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: Move check for vbo mapping into api_validate.c.

Instead of checking for mapped buffers in vbo_bind_arrays
do this check in api_validate.c. This additionally
enables printing the draw calls name into the error
string.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: Move _mesa_all_buffers_are_unmapped to arrayobj.c.

Move the function to check if all vao buffers are
unmapped into the vao implementation file.
Rename the function to _mesa_all_buffers_are_unmapped.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

vbo: Array draw must not care about glBegin/glEnd vbo mapping.

In array draw do not check if the vertex buffer object that
is used to implement immediate mode glBegin/glEnd is mapped.

Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

nv50,nvc0: fix depth range when halfz is enabled

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97231
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>

gallium/util: add helper to compute zmin/zmax for a viewport state

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: "11.2 12.0" <mesa-stable@lists.freedesktop.org>

vbo: allow DrawElementsBaseVertex in display lists

Looks like it was missed originally. The multi version is there already.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97331
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org

freedreno/a3xx+a4xx: move common VBOs to fd_context

These are the same for a3xx and later.  (a2xx could probably use them
too, but due to limited hw support and ancient downstream kernels, it
isn't so easy to test.)

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a2xx: add missing casts to silence notices

Signed-off-by: Francesco Ansanelli <francians@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: fix issue with emit_tex()

For various tex fetch instructions, coord's get fixed up in different
ways.  But modifying the array returned from get_src() has side-effects
if the same SSA src is used again.. the later instruction will see the
previous fixups.

Fix this, and const'ify things to prevent this sort of mistake in the
future.

Noticed by Varad when adding support for txf_ms.

Signed-off-by: Rob Clark <robdclark@gmail.com>

glsl: emit a specific error when ast_*_assign changes type

For regular ast_add, we can implicitly change either a or b's type.
However in an assignment situation, the type of the lvalue is fixed. So
if the implicit conversion logic decides to change it, it means that the
rhs's type could not be converted to the lhs type.

Emit a specific error for this rather than the rather mysterious "is not
an lvalue" error that results from having a i2f or other operation as
the lvalue.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96729
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

st/mesa: provide GL_OES_copy_image support by caching the original ETC data

The additional provision of GL_OES_copy_image is that it work for ETC.
However many desktop GPUs don't have native ETC support, so st/mesa does
the decoding by hand. Instead of discarding the compressed data, keep it
around in CPU memory. Use it when performing image copies.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: refactor duplicated etc fallback checks

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: look for frag data bindings with [0] tacked onto the end for arrays

The GL spec is very unclear on this point. Apparently this is discussed
without resolution in the closed Khronos bugtracker at
https://cvs.khronos.org/bugzilla/show_bug.cgi?id=7829 . The
recommendation is to allow dropping the [0] for looking up the bindings.

The approach taken in this patch is to instead tack on [0]'s for each
arrayness level of the output's type, and doing the lookup again. That
way, for

out vec4 foo[2][2][2]

we will end up looking for bindings for foo, foo[0], foo[0][0], and
foo[0][0][0], in that order of preference.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96765
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Eric Anholt <eric@anholt.net>

anv: pipeline: gen7: fix assert in debug mode

SampleMask is only 8bits long on gen7.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97278

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: change state query return value for RGB565

The GL_BGR and GL_UNSIGNED_SHORT_5_6_5_REV are not defined anywhere in
OpenGL ES 3.2 (or earlier) specification, and there are no known extensions
in the Khronos registry that would add these enums as valid responses for
glGetIntegerv(GL_IMPLEMENTATION_COLOR_READ_TYPE) and
glGetIntegerv(GL_IMPLEMENTATION_COLOR_READ_FORMAT) queries.

Note that this patch does not change the bit layout returned by the query. As
defined by the GL spec, the bit layout of GL_RGB + GL_UNSIGNED_SHORT_5_6_5 and
GL_BGR + GL_UNSIGNED_SHORT_5_6_5_REV are identical.

TEST=dEQP-GLES3.functional.state_query.integers.*

Signed-off-by: Haixia Shi <hshi@chromium.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Change-Id: I81bbc8ccdc7e125edaeae443baf6fa8fdefcc6b6

anv/device: Add limits for InterpolationOffset

Fixes the vulkan cts regression in test dEQP-VK.api.info.device.properties

Cc: Mark Janes <mark.a.janes@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Change 8X MSAA sample mapping

This is required following the change in 8X sample positions.
Fixes the recently modified multisample-scaled-blit piglit tests.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Change 8x multisample positions

There are no standard sample positions defined in OpenGL and OpenGL
ES specs. Implementations have the freedom to pick the positions
which give plausible results. But the Vulkan 1.0 spec does define
standard sample positions for different sample counts. Defined
positions in Vulkan for all the sample counts except 8X match with
the positions we set in i965. We have an upcoming plan to share the
blorp code between OpenGL and Vulkan driver in near future. Keeping
the 8X sample positions same on both the drivers will help us move
in that direction.

Here is an argument by Neil Roberts (from commit 20250e85) against
any advantage of current 8X sample positions over the new ones:

"The comment above for the 8x sample positions says that the hardware
implements centroid interpolation by picking the centre-most sample
that is inside the primitive. That implies that it might be worthwhile
to pick a pattern that includes 0.5,0.5. However by experimentation
this doesn't seem to actually be the case. With the sample positions
in this patch, if I modify the piglit test below so that it instead
reports the centroid position, it reports 0.492188,0.421875 which
doesn't match any of the positions. If I modify the sample positions
so that they include one at exactly 0.5,0.5 it doesn't help and it
reports another position which is even further from the center for
some reason.

arb_gpu_shader5-interpolateAtSample-different

Kenneth Graunke experimented with some other patterns that have a
higher standard deviation but I think after some discussion it was
decided that it would be better to pick the same pattern as the other
graphics API in case there are games that rely on this pattern."

Observed no regressions in jenkins testing.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv: Use macro to avoid code duplication for sample positions

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

st/mesa: BufferData should flag NewDriverState

because NewDriverState is filtered depending on active shader states,
while st->dirty isn't.

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: don't update atomic, SSBO, UBO and TBO states that have no effect

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: _NEW_TEXTURE & CONSTANTS shouldn't flag states that aren't used

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: when changing shaders, only dirty states that are affected by them

This reduces the amount of state processing that has no effect.

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: determine states used or affected by shaders at compile time

At compile time, each shader determines which ST_NEW flags should be set
at shader bind time.

This just sets the new field for all shaders. The next commit will use it.

v2: small code unification

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)

st/mesa: remove TES/TCS/GS state dirtying optimization

This will be replaced with a better mechanism.

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: don't update clip state on VS changes if it has no effect

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: don't update clip state if it has no effect

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: Document that _mesa_enum_to_string() returns non-null (v2)

It always returns non-null, even if the number is an invalid enum.

Cc: Haixia Shi <hshi@chromium.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Change-Id: I26e8843c96130be972e66f48a49e362442e1bf97

glsl: Fix invariant matching in GLSL 4.30 and GLSL ES 1.00.

Old languages (GLSL <= 4.20 and GLSL ES 1.00) require "invariant"
to be specified on both inputs and outputs, and match when linking.

New languages only allow outputs to be qualified as "invariant"
and remove the "invariant must match" restriction when linking
varyings (because no input can have that qualifier).

Commit 426a50e2089b12d33f5c075aa5622f64076914a3 introduced the new
behavior for ES 3.00.  It also removed the "must match" restriction
for ES 1.00 shaders, which I believe is incorrect.  This patch adds
that back, as well as making 4.30+ follow the new rules.

Thanks to Qiankun Miao for noticing this discrepancy.

Fixes a WebGL 2.0 conformance test when run in Chromium:
https://www.khronos.org/registry/webgl/sdk/tests/deqp/data/gles3/shaders/qualification_order.html?webglVersion=2

Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96971
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

glsl: Tidy stream handling in merge_qualifier().

The previous commit fixed xfb_buffer handling, which was largely copy
and pasted from the stream handling.  The difference is that stream
was set in input_layout_mask, so it worked.

However, that's totally rubbish: stream is only valid on geometry shader
outputs.  Presumably this was to hack around inout.  Instead, apply the
solution I used in the previous fix.

Really, we just need to separate shader interface and parameter
qualifier handling so this isn't a mess, but this patch at least
tidies it slightly.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

glsl: Fix inout qualifier handling in GLSL 4.40.

inout variables have q.in and q.out set.  We were trying to set
xfb_buffer = 1 for shader output variables (and inadvertantly setting
it on inout parameters, too).  But input_layout_mask doesn't have
xfb_buffer set, so it was seen as in invalid input qualifier.

This meant that all 'inout' parameters were broken.

Caught by running a WebGL conformance test in Chromium:
https://www.khronos.org/registry/webgl/sdk/tests/deqp/data/gles3/shaders/qualification_order.html?webglVersion=2

Fixes Piglit's tests/spec/glsl-4.40/compiler/inout-parameter-qualifier.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

swrast: fix active attribs with atifragshader

Only include the ones that can be used by the shader.

This fixes texture coordinates, which were completely wrong,
because WPOS was included in the list of attribs. It also
increases performance noticeably.

Signed-off-by: Miklós Máté <mtmkls@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/omx/dec/h264: pass default scaling lists in raster format

Tested-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

appveyor: Force Visual Studio 2013 image.

It seems the default build image is now Visual Studio 2015, and Visual
Studio 2013 is not installed.

appveyor: Install pywin32 extensions.

AppVeyor build images seem to have been upgraded to Python 2.7.12, but
no longer have pywin32 pre-installed.

glsl/tests: fix segfault in uniform initializer test

Caused by 549222f5

Tested-by: Aaron Watry <awatry@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97286

glcpp: Only disallow #undef of pre-defined macros on GLSL ES >= 3.00 shaders

Section 3.4 (Preprocessor) of the GLSL ES 3.00 spec says:

   It is an error to undefine or to redefine a built-in (pre-defined)
   macro name.

The GLSL ES 1.00 spec does not contain this text.

Section 3.3 (Preprocessor) of the GLSL 1.30 spec says:

   #define and #undef functionality are defined as is standard for C++
   preprocessors for macro definitions both with and without macro
   parameters.

At least as far as I can tell GCC allow '#undef __FILE__'.  Furthermore,
there are desktop OpenGL conformance tests that expect '#undef
__VERSION__' and '#undef GL_core_profile' to work.

Fixes:

    GL45-CTS.shaders.preprocessor.definitions.undefine_version_vertex
    GL45-CTS.shaders.preprocessor.definitions.undefine_version_fragment
    GL45-CTS.shaders.preprocessor.definitions.undefine_core_profile_vertex
    GL45-CTS.shaders.preprocessor.definitions.undefine_core_profile_fragment

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: mesa-stable@lists.freedesktop.org

glcpp: Track the actual version instead of just the version_resolved flag

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: mesa-stable@lists.freedesktop.org

glsl: remove remaining tabs in link_uniform_initializers.cpp

Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: use UniformHash to find storage location

There is no need to be looping over all the uniforms.

Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: remove dead builtins before assigning varying locations

Builtins already have locations assigned so this shouldn't
change anything. We want to call it earlier so we can tranform
GLSL IR to NIR earlier.

Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: split out varying and uniform linking code

Here a new function link_varyings_and_uniforms() is created this
should help make it easier to follow the code in link_shader()
which was getting very large.

Note the end of the new function contains a for loop with some
lowering calls that currently don't seem related to varyings or
uniforms but they are a dependancy for converting to NIR ealier
so we move things here now to keep things easy to follow.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965/vec4: Make opt_vector_float reset at the top of each block

The pass isn't really control-flow aware and you can get into case where it
tries to combine instructions from different blocks.  This can actually
lead to an assertion failure when removing unneeded instructions if part of
the vector is set in one block and part in another.  This prevents
regressions in the next commit.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

mesa: Use a temporary set to track whether we've added a resource yet.

Saves another .1s on servo.trace.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

prog_hash_table: Convert to using util/hash_table.h.

Improves glretrace -b servo.trace (a trace of Mozilla's servo rendering
engine booting, rendering a page, and exiting) from 1.8s to 1.1s.  It uses
a large uniform array of structs, making a huge number of separate program
resources, and the fixed-size hash table was killing it.  Given how many
times we've improved performance by swapping the hash table to
util/hash_table.h, just do it once and for all.

This just rebases the old hash table API on top of util/, for minimal
diff.  Cleaning things up is left for later, particularly because I want
to fix up the new hash table API a little bit.

v2: Add UNUSED to the now-unused parameter.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

prog_hash_table: Convert compare funcs to match util/hash_table.h.

I'm going to replace this hash table with util/hash_table.h, and the first
step is to compare things the same way.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

nir: Drop an unused program/hash_table.h include.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

swr: [rasterizer core] unused variable warning fixes

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] add core string to JitManager

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] fix OOB check of viewport indices

Use correct comparison intrinsic for OOB check of viewport indices.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer common] add linux definition for InterlockedAdd64

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] add VMASKSTOREPS intrinsic

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] add mask support for odd format fetch

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] routing of viewport indexes through frontend

Viewport transform performed based on per-prim viewport index if available.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] split FE and BE stats

Separated FE stats out into its own structure.  There are 17 FE vs 3 BE
stat fields.  Since there is only one FE thread per DC then we don't have
to loop over all threads and sum up FE stats over all the worker threads.
This also reduces size of DC since we only need to store one copy of the
FE stats and not one per worker.  Finally, we can use the new FE callback
mechanism to update these.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] remove all old stats code

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] viewport array support

Change viewport matrix storage from AOS to SOA to support viewport arrays.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] fetch support for offsetting VertexID

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] fundamentally change how stats work

Add a per draw stats callback to update driver stats.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] add rasterizerSampleCount to PS context

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] remove cygwin threads.cpp stubs

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] allow override of KNOB thread settings

- Remove HYPERTHREADED_FE support
- Add threading info as optional data passed to SwrCreateContext.
  If supplied this data will override any KNOB thread settings.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>