Implement get_longjmp_target for tilegx.

  gdb/
      * tilegx-tdep.c (tilegx_get_longjmp_target): New function.
      (tilegx_gdbarch_init): Install it.

Add missing file from the previous commit.
(forget to "cvs add" it)

*** empty log message ***

daily update

Replace have_hle with hle_prefix

* config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
(check_hle): Updated.
(md_assemble): Likewise.
(parse_insn): Likewise.

Optimize REP prefix check

gas/

* config/tc-i386.c (_i386_insn): Add rep_prefix.
(md_assemble): Check if REP prefix is OK.
(parse_insn): Remove expecting_string_instruction.  Set
i.rep_prefix.

gas/testsuite/

* gas/i386/i386.exp: Run inval-rep and x86-64-inval-rep.

* gas/i386/inval-rep.l: New file.
* gas/i386/inval-rep.s: Likewise.
* gas/i386/x86-64-inval-rep.l: Likewise.
* gas/i386/x86-64-inval-rep.s: Likewise.

* python/py-arch.c (archpy_disassemble): Use PyInt_Check and
PyLong_Check.

* python/py-finishbreakpoint.c (bpfinishpy_init): gcc -Wall lint.
* python/python.c (gdbpy_find_pc_line): Ditto.

* contrib/excheck.py: New file.
* contrib/exsummary.py: New file.
* contrib/gcc-with-excheck: New file.

* python/python.c (gdbpy_print_stack): Call begin_line and
fprintf_filtered inside TRY_CATCH.

* python/python.c (gdbpy_find_pc_line): Call find_pc_line
inside TRY_CATCH.

* py-finishbreakpoint.c (bpfinishpy_init): Reorganize to call
frame_object_to_frame_info inside TRY_CATCH.

include/opcode/

* aarch64.h (AARCH64_FEATURE_CRC): New macro.

opcodes/

* aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
(aarch64_feature_crc): New static.
(CRC): New macro.
(aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
* aarch64-asm-2.c: Re-generate.
* aarch64-dis-2.c: Ditto.
* aarch64-opc-2.c: Ditto.

gas/

* config/tc-aarch64.c (aarch64_features): Add the 'crc' option.

gas/testsuite/

* gas/aarch64/crc32.s: New test.
* gas/aarch64/crc32.d: Ditto.

* py-block.c (gdbpy_block_for_pc): Call block_for_pc inside
TRY_CATCH.

* objfiles.h (ALL_PSPACE_OBJFILES): Remove trailing backlash.

gas/

* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
for system registers.

gas/testsuite/

* gas/aarch64/illegal.l: Delete the error message for
msr S3_1_C13_C15_1,x7.
* gas/aarch64/sysreg.s: Add new tests.
* gas/aarch64/sysreg.d: Update.

* configure.ac: Invoke AC_SYS_LARGEFILE.
* configure, config.in: Rebuild.

bfd/
    * elf32-arm.c (elf32_arm_size_dynamic_sections): Don't call
    elf32_arm_allocate_dynrelocs for source reloc for non-dynamic link.

    ld/testsuite/
    * ld-arm/tls-local-static.s: New test.
    * ld-arm/tls-local-static.d: New.
    * ld-arm/arm-elf.exp (tls-local-static): Add test.

* win32-low.c: Throughout, fix format strings and casts of
printf-like functions to avoid type related warnings on all
platforms.
(get_child_debug_event): Print dwDebugEventCode as hex since
that's how it's usually documented.

gdb/gdbserver/

* tracepoint.c (cmd_qtbuffer): Call phex_nz instead of
pulongest.

gdb/gdbserver/
* gdb.trace/report.exp: Move some code to ...
(use_collected_data): New.
(top level): Call use_collected_data once on the live target.
Save at file of the current trace session, load it with target
tfile, and call use_collected_data again.

*** empty log message ***

* target.h (Target::plt_fde_location, do_plt_fde_location): Declare.
* target.cc (Target::do_plt_fde_location): New function.
* ehframe.h (class FDE): Add post_map field to u_.from_linker,
accessor function, and constructor param.
(struct Post_fde, Post_fdes): Declare.
(Cie::write): Add post_fdes param.
* ehframe.cc (Fde::write): Use plt_fde_location.
(struct Post_fde): Define.
(Cie::write): Stash FDEs added post merge mapping.
(Eh_frame::add_ehframe_for_plt): Assert no new CIEs after mapping.
Adjust Fde constructor call.  Bump final_data_size_ for post map FDEs.
(Eh_frame::do_sized_write): Arrange to write post map FDES after
other FDEs.
* powerpc.cc (Target_powerpc::do_plt_fde_location): New function.
(Target_powerpc::has_glink): New function.
(Target_powerpc::do_relax): Add eh_frame info for stubs.
(struct Eh_cie, eh_frame_cie, glink_eh_frame_fde_64,
glink_eh_frame_fde_32, default_fde): New data.
(Stub_table::eh_frame_added_): New var.
(Stub_table::find_long_branch_entry, stub_address, stub_offset):
Make const.
(Stub_table::add_eh_frame): New function.
(Output_data_glink::add_eh_frame): New function.
(Target_powerpc::make_glink_section): Call add_eh_frame.

daily update

* reloc.c (BFD_RELOC_RL78_CODE): Add.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* elf32-rl78.c (rl78_elf_relocate_section): Handle weak code
references in compuated relocs.

* config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
(rl78_op): Handle %code().
(rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
(tc_gen_reloc): Likwise; convert to a computed reloc.
(md_apply_fix): Likewise.

* windows-nat.c: Throughout, fix format strings and casts of
printf-like functions to avoid type related warnings on all
platforms.
(handle_output_debug_string): Fetch context information address
from debug string using string_to_core_addr.

gdb/testsuite/
* gdb.threads/fork-thread-pending.c (main): Add alarm.

gdb/testsuite/
* gdb.base/valgrind-infcall.exp (valgrind_pid): New variable.
Add final kill of ${valgrind_pid}.

  gdb/
* regformats/reg-tilegx.dat (name): Change abi name to "tilegx".
* regformats/reg-tilegx32.dat: New.

  gdbserver/

* Makefile.in (clean): Remove reg-tilegx.c, reg-tilegx32.c.
(reg-tilegx32.c): New rule.
* configure.srv (tilegx-*-linux*): Add reg-tilegx32.o to srv_regobj.
* linux-tile-low.c (tile_arch_setup): New function.  Invoke
different register info initializer according to elf class.
(init_registers_tilgx32): New function.  The tilegx32 register info
initializer.
(tile_fill_gregset): Use "uint_reg_t" to represent register size.
(tile_store_gregset): Likewise.

  gdb/
      * configure.tgt (tilegx-*-linux*): Enable gdbserver.

  gdb/
     * configure.tgt (tilegx-*-linux*): Replace whitespace with tab.

gdb/gdbserver/
* server.c (process_point_options): Print debug message when
debug_threads is true.

PR binutils/15191
* readelf.c (offsetof): Define.
(CHECK_ENTSIZE_VALUES): Remove extraneous indefinite article.
(process_corefile_note_segment): Allow notes without name or
desc.  Combine out-of-range checks.  Disallow "negative"
notesz or descsz.

* scripttempl/elf32msp430.sc: Add placement of .data.* sections.
Add alignment of .bss section.
* scripttempl/elf32msp430_3.sc: Likewise.

* rl78-decode.opc (rl78_decode_opcode): Fix typo.
* rl78-decode.c: Regenerate.

gdb/
2013-02-27  Yao Qi  <yao@codesourcery.com>
    Pedro Alves  <palves@redhat.com>

* tracepoint.c (tfile_trace_find): For tfind
     pc/tp/range/outside, look for the next trace frame instead of
     always starting from frame 0.

*** empty log message ***

daily update

Add moxie-*-rtems* support.

Tweak moxie-rtems triplet recognition

PR binutils/15191
* binutils-all/readelf.n: Updare expected output from readelf.

* readelf.c (process_corefile_note_segment): Prevent attempts to
read beyond the end of the note buffer.

gdb/gdbserver/

* tracepoint.c (cmd_qtbuffer): Don't set '\0' in OWN_BUF.

PR ld/15188
* ld.texinfo: Fix typos.

*** empty log message ***

daily update

* rl78-decode.opc: Fix encoding of DIVWU insn.
* rl78-decode.c: Regenerate.

* config/rl78-parse.y: Fix encoding of DIVWU insn.

Tweak warning output on Linux kernels with broken i386 NX support.

The "you have broken" bit of this text reads to me as if I had broken
it myself somehow.  This patch eliminates that ambiguity.

2013-02-25  Pedro Alves  <palves@redhat.com>

* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Change
warning text.

2013-02-25  Terry Guo  <terry.guo@arm.com>

* config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
* doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
list of accepted CPUs.

*** empty log message ***

daily update

* mips-tdep.c (mips32_scan_prologue): Reset frame_offset to zero
if $fp is used as the virtual frame pointer.

*** empty log message ***

daily update

*** empty log message ***

* elfread.c (elf_symtab_read): Do not use udata.p here to find
symbol size.
* ppc64-tdep.c (ppc64_elf_make_msymbol_special): New function.
* ppc64-tdep.h (ppc64_elf_make_msymbol_special): Declare.
* ppc-linux-tdep.c (ppc_linux_init_abi): Set up to use the above.
* ppcfbsd-tdep.c (ppcfbsd_init_abi): Likewise.

daily update

gdb/
Code cleanup.
* elfread.c (build_id_bfd_get): Make the return type const.
(build_id_verify): Make the check parameter const.
(build_id_to_debug_filename): Make the build_id parameter and variable
data const.
(find_separate_debug_file_by_buildid): Make the variable build_id const.

Set unique_global only for definition

bfd/

PR ld/15167
* elf64-ia64-vms.c (elf64_vms_link_add_object_symbols): Set
unique_global only for definition.
* elflink.c (_bfd_elf_merge_symbol): Don't set unique_global
here.
(elf_link_add_object_symbols): Set unique_global only
for definition.

ld/testsuite/

PR ld/15167
* ld-unique/unique.exp: Add a test for shared library with
reference.

*** empty log message ***

daily update

* gdb.texinfo: Remove bad @syncodeindex.
(Values From Inferior, Types In Python, Inferiors In Python)
(Events In Python, Threads In Python, Frames In Python, Blocks In
Python, Symbols In Python, Symbol Tables In Python): Remove
@tables.
(Packets, General Query Packets, Tracepoint Packets)
(Host I/O Packets): Use @w{} for empty @item.

* scripttempl/elf.sc (.init_array, .fini_array): Don't sort all
.init_array/.fini_array input sections before .ctors/.dtors input
sections.
(CTORS_IN_INIT_ARRAY, DTORS_IN_INIT_ARRAY): Adjust to suit.

bfd/
* elf-bfd.h (struct elf_build_id): Extracted from..
(struct elf_build_id_info): ..here.  Delete.
(struct output_elf_obj_tdata): New, extracted from..
(struct elf_obj_tdata): ..here.  Reorganize for better packing.
Add "o" field.
(elf_program_header_size): Reference tdata->o.
(elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker,
elf_stack_flags, elf_shstrtab, elf_strtab_sec, elf_shstrtab_sec,
elf_section_syms, elf_num_section_syms, elf_flags_init): Likewise.
* elf.c (bfd_elf_allocate_object): Allocate output_elf_obj_tdata
when opening bfd in any mode that might write.
(_bfd_elf_write_object_contents): Use build_id field in
output_elf_obj_tdata.
(_bfd_elf_close_and_cleanup): Tweak elf_shstrtab test.
(elfobj_grok_gnu_build_id): Adjust for elf_tdata changes.
gdb/
* elfread.c (build_id_bfd_get): Adjust for elf_tdata changes.
ld/
* emultempl/elf32.em (write_build_id, setup_build_id): Adjust
for elf_tdata changes.

* elf-bfd.h (struct core_elf_obj_tdata): New.
(struct elf_obj_tdata): Delete core_signal, core_pid, core_lwpid,
core_program, and core_command.  Add "core".
* elf.c (bfd_elf_mkcorefile): Allocate "core" struct.
Update all refs to tdata core fields.
* elf32-am33lin.c, * elf32-arm.c, * elf32-cris.c, * elf32-frv.c,
* elf32-hppa.c, * elf32-i386.c, * elf32-m68k.c, * elf32-mips.c,
* elf32-nios2.c, * elf32-ppc.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-sparc.c, * elf32-tilegx.c,
* elf32-tilepro.c, * elf32-xtensa.c, * elf64-aarch64.c,
* elf64-hppa.c, * elf64-mips.c, * elf64-ppc.c, * elf64-tilegx.c,
* elf64-x86-64.c, * elfcore.h, * elfn32-mips.c: Update all refs
to tdata core fields.

bfd/
* elf-bfd.h (struct elf_obj_tdata): Rename segment_map to seg_map.
Delete num_locals and num_globals.
(elf_num_locals, elf_num_globals): Don't define.
(elf_seg_map, elf_next_file_pos, elf_eh_frame_hdr, elf_linker,
elf_stack_flags, elf_strtab_sec, elf_shstrtab_sec): Define.
* bfd.c, * elf-eh-frame.c, * elf-nacl.c, * elf-vxworks.c, * elf.c,
* elf32-arm.c, * elf32-lm32.c, * elf32-ppc.c, * elf32-rx.c,
* elf32-spu.c, * elf64-hppa.c, * elfcode.h, * elflink.c,
* elfnn-ia64.c, * elfxx-mips.c: Use newly defined elf_obj_tdata
accessor macros.
* elf.c (elf_map_symbols): Add pnum_locals param.  Return
number of locals syms via new param.
(swap_out_syms): Adjust to suit elf_map_symbols change.
ld/
* emultempl/elf-generic.em: Use newly defined elf_obj_tdata
accessor macros.

Add a new method 'disassemble' to gdb.Architecture class.

* python/py-arch.c (archpy_disassmble): Implementation of the
new method gdb.Architecture.disassemble.
(arch_object_methods): Add entry for the new method.

* doc/gdb.texinfo (Architectures In Python): Add description
about the new method gdb.Architecture.disassemble.

* testsuite/gdb.python/py-arch.c: New test case
* testsuite/gdb.python/py-arch.exp: New tests to test
gdb.Architecture.disassemble
* testsuite/gdb.python/Makefile.in: Add py-arch to the list of
EXECUTABLES.

*** empty log message ***

daily update

* Makefile.am: Use $(ELF_DEPS) on a number of eelf*.c rules.
* Makefile.in: Regenerate.

  gdb/

    * MAINTAINERS (Write After Approval): Add myself to the list.

*** empty log message ***

daily update

* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_symbol): Also clear
STO_MICROMIPS annotation.

gdbserver:server.c - use unpack_varlen_hex to extract hex numbers.

Addresses, as most numbers in the RSP are hex encoded, with variable
length (that just means the width isn't specified, and there's no top
cap.  So they should be extracted with unpack_varlen_hex.

A couple spots in server.c are using strto(u)l, which doesn't work on
LLP64 targets.

This patch fixes it.

Tested on x86_64 Fedora 17.

2013-02-19  Pedro Alves  <palves@redhat.com>
    Kai Tietz <ktietz@redhat.com>

PR gdb/15161

* server.c (handle_query) <CRC check>: Use unpack_varlen_hex
instead of strtoul to extract address from packet.
(process_serial_event) <'z'>: Likewise.

Garbage collect struct monitor_ops::load_routine.

While touching monitor_load in a previous patch, I noticed this method
is no longer set to anything other than NULL in the tree, so we can
remove it.

Tested by building with --enable-targets=all.

2013-02-19  Pedro Alves  <palves@redhat.com>

Garbage collect 'struct monitor_ops'::load_routine.

* monitor.h (struct monitor_ops) <load_routine>: Remove field.
* monitor.c (monitor_load): No longer call
current_monitor->load_routine.
* dbug-rom.c (init_dbug_cmds): Don't set 'load_routine'.
* m32r-rom.c (init_m32r_cmds): Don't set 'load_routine'.
* ppcbug-rom.c (init_ppc_cmds): Don't set 'load_routine'.

Harmonize this monitor_load with generic_load.

Harmonize this old-looking code with generic_load, which fixes several
issues.

2013-02-19  Pedro Alves  <palves@redhat.com>

PR gdb/15161

Harmonize with generic_load.

* monitor.c: Include "readline/readline.h".
(monitor_load): Rename parameter 'file' to 'args'.  Use build_argv
instead of sscanf.  Use CORE_ADDR/strtoulst instead of unsigned
long/strtol for the 'load_offset' local.  Error out if no argument
is given or if too many arguments are given.  Tilde expand the
passed in file name.

Implement Intel SMAP instructions

gas/

PR gas/15159
* config/tc-i386.c (cpu_arch): Add ".smap".

* doc/c-i386.texi: Document smap.

gas/testsuite/

PR gas/15159
* gas/i386/i386.exp: Run smap and x86-64-smap.

* gas/i386/smap.d: New file.
* gas/i386/smap.s: likewise.
* gas/i386/x86-64-smap.d: likewise.

opcodes/

PR gas/15159
* i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1.

* i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS.
(cpu_flags): Add CpuSMAP.

* i386-opc.h (CpuSMAP): New.
(i386_cpu_flags): Add cpusmap.

* i386-opc.tbl: Add clac and stac.

* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.

   PR gdb/15161
       * symfile.c (load_section_data): Change type of load_offset
       to CORE_ADDR.
       (generic_load): User strtoulst instead of strtoul for conversion
       of load_offset.

    * tilegx-tdep.c (tilegx_analyze_prologue): add check for
        for return address, "lr" register, saved on stack.
        * tilegx-tdep.c (tilegx_frame_cache): update "PC" reg
        after we invoke tilegx_analyze_prologue.

   * tilegx-tdep.c (itilegx_gdbarch_init): char type should be signed.

* tilegx-tdep.c (tilegx_skip_prologue): Use skip_prologue_using_sal.

    * tilegx-tdep.c (INT_SWINT_1_SIGRETURN): New macro.
        (tilegx_write_pc): New function.
        (tilegx_cannot_reference_register): Return zero if REGNO
        is TILEGX_FAULTNUM_REGNUM.
        (tilegx_gdbarch_init): Add call to set_gdbarch_write_pc.
        (tilegx_register_name): Add handling of "faultnum" register.
        * tilegx-tdep.h (enum tilegx_regnum): Add TILEGX_FAULTNUM_REGNUM.
        * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Add
        handling of TILEGX_FAULTNUM_REGNUM.
        * tilegx-linux-nat.c (regmap): Add entry for TILEGX_FAULTNUM_REGNUM.

* tilegx-tdep.c (tilegx_push_dummy_call): args pushed on stack
should be aligned to 64bit.

* windows-nat.c (windows_xfer_memory): Fix debug-output
for LLP64.

2013-02-19  Lei Liu  <lei.liu2@windriver.com>

* mips-linux-nat.c (mips64_linux_regsets_store_registers):
Don't check DSP register number if HAVE_DSP is not set.

2013-02-19  Lei Liu  <lei.liu2@windriver.com>

* MAINTAINERS (Write After Approval): Add myself to the list.

2013-02-19  Sandra Loosemore  <sandra@codesourcery.com>

PR ld/15146

ld/
* plugin.c (plugin_notice): Add null check before dereferencing
pointer.

* lib/ld-lib.exp (run_ld_link_tests): Add another argument, pass
its contents to ar_simple_create and ld_simple_link after
objfiles.
* ld-aarch64/aarch64-elf.exp: Adjust accordingly.
* ld-alpha/alpha.exp: Likewise.
* ld-arm/arm-elf.exp: Likewise.
* ld-arm/export-class.exp: Likewise.
* ld-elf/comm-data.exp: Likewise.
* ld-elf/eh-group.exp: Likewise.
* ld-elf/elf.exp: Likewise.
* ld-elf/export-class.exp: Likewise.
* ld-elfvers/vers.exp: Likewise.
* ld-frv/tls.exp: Likewise.
* ld-i386/export-class.exp: Likewise.
* ld-i386/i386.exp: Likewise.
* ld-ia64/ia64.exp: Likewise.
* ld-libs/libs.exp: Likewise.
* ld-m68k/m68k.exp: Likewise.
* ld-metag/metag.exp: Likewise.
* ld-mips-elf/comm-data.exp: Likewise.
* ld-mips-elf/export-class.exp: Likewise.
* ld-mips-elf/mips-elf.exp: Likewise.
* ld-mn10300/mn10300.exp: Likewise.
* ld-pe/pe-compile.exp: Likewise.
* ld-pe/pe.exp: Likewise.
* ld-plugin/plugin.exp: Likewise.
* ld-powerpc/aix52.exp: Likewise.
* ld-powerpc/export-class.exp: Likewise.
* ld-powerpc/powerpc.exp: Likewise.
* ld-s390/s390.exp: Likewise.
* ld-sh/sh-vxworks.exp: Likewise.
* ld-sh/sh64/sh64.exp: Likewise.
* ld-sparc/sparc.exp: Likewise.
* ld-tic6x/tic6x.exp: Likewise.
* ld-tilegx/tilegx.exp: Likewise.
* ld-tilepro/tilepro.exp: Likewise.
* ld-undefined/entry.exp: Likewise.
* ld-vax-elf/vax-elf.exp: Likewise.
* ld-x86-64/dwarfreloc.exp: Likewise.
* ld-x86-64/export-class.exp: Likewise.
* ld-x86-64/x86-64.exp: Likewise.
* ld-xc16x/xc16x.exp: Likewise.
* ld-xstormy16/xstormy16.exp: Likewise.
* ld-xtensa/xtensa.exp: Likewise.

*** empty log message ***

include/
* bfdlink.h (struct bfd_link_info): Delete emit_note_gnu_build_id.
bfd/
* configure.in: Bump version to 2.23.52.
* elf-bfd.h (struct elf_build_id_info): New.
(struct elf_obj_tdata): Delete after_write_object_contents,
after_write_object_contents_info and build_id_size.  Make build_id
a pointer to struct elf_build_id_info.
* elf.c (_bfd_elf_write_object_contents): Style.  Update
after_write_ibject_contents invocation.
(elfobj_grok_gnu_build_id): Update for new build_id struct.  Don't
allow zero size notes.
* configure: Regenerate.
gdb/
* elfread.c (struct build_id): Delete.  Use struct elf_build_id
throughout file instead.
(build_id_bfd_get): Update to use new elf_tdata build_id field.
Don't xmalloc return value.
(build_id_verify): Similarly.  Don't xfree.
(build_id_to_debug_filename): Update.
(find_separate_debug_file_by_buildid): Update, don't xfree.
ld/
* emultempl/elf32.em (emit_note_gnu_build_id): New static var.
Replace all info->emit_note_gnu_build_id refs.
(id_note_section_size): Rename from
gld${EMULATION_NAME}_id_note_section_size.
(struct build_id_info): Delete.
(write_build_id): Rename from
gld${EMULATION_NAME}_write_build_id_section.
Update elf_tdata usage.  Style, formatting.
(setup_build_id): New function.
(gld${EMULATION_NAME}_after_open): Use setup_build_id.

* ld-mips-elf/jalx-2.ld: Include .rel.plt in output, give .plt a
mapping.
* ld-mips-elf/jalx-2.dd: Adjust disassembly accordingly.

* config/tc-mips.c (s_cpload): Call mips_mark_labels and set
mips_assembling_insn appropriately.
(s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.

* elf64-mips.c (micromips_elf64_howto_table_rel): Add
R_MICROMIPS_SCN_DISP and R_MICROMIPS_JALR.
(micromips_elf64_howto_table_rela): Likewise.
(micromips_reloc_map): Add BFD_RELOC_MICROMIPS_JALR.
* elfn32-mips.c (elf_micromips_howto_table_rel): Add
R_MICROMIPS_SCN_DISP and R_MICROMIPS_JALR.
(elf_micromips_howto_table_rela): Likewise.
(micromips_reloc_map): Add BFD_RELOC_MICROMIPS_JALR.

* elfxx-mips.c (MICROMIPS_P): New macro.
(_bfd_mips_elf_symbol_processing): Use it.

* elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Clarify
comment on _PROCEDURE_LINKAGE_TABLE_ creation.

daily update

PR gdb/15102:
* dwarf2read.c (read_subrange_type): Use result of
'check_typedef'.
gdb/testsuite
* gdb.dwarf2/subrange.exp: New file.

gdb/gdbserver

* linux-bfin-low.c (the_low_target): Use NULL instead of 0.

Fix ChangeLog typo.

* config/tc-mips.c (append_insn): Correcting indentation, remove
extraneous braces.