* gas/ppc/vsx2.d: Ignore trailing padding.

* ld-powerpc/export-class.exp (supports_ppc64): Delete.
(powerpc_export_class_test): Add "endian" param.
(abis): Add little-endian targets and test.
* ld-powerpc/powerpc-64-export-class.xd: Update for little-endian.

opcodes/
* ppc-dis.c (powerpc_init_dialect): Set default dialect to power8.
* ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK,
XLS_MASK, PPCVSX2): New defines.
(powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb,
fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe,
mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp,
mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd,
mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx,
vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher,
vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd.,
vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd,
vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw,
vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor,
vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh,
vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq,
vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp,
xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp,
xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp,
xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp,
xssubsp, xxleqv, xxlnand, xxlorc>: New instructions.
<lxvx, stxvx>: New extended mnemonics.

gas/
* config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
and clean up warning when using PRINT_OPCODE_TABLE.

gas/testsuite/
* gas/ppc/altivec2.d <bcdadd., bcdadd., vaddcuq, vaddecuq, vaddeuqm,
vaddudm, vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh,
vclzw, vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud.,
veqv, vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw,
vmuleuw, vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast,
vorc, vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd,
vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm,
vsubudm, vsubuqm, vupkhsw, vupklsw>: Add new tests.
* gas/ppc/altivec2.s: Likewise.
* gas/ppc/power8.d <bcdadd., bcdsub., bctar, bctarl, clrbhrb, fmrgew,
fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe, mfvsrd, mfvsrwz,
msgclrp, msgsndp, mtsle, mtvsrd, mtvsrwa, mtvsrwz, pbt., rfebb,
stqcx., stxsiwx, stxsspx, vaddcuq, vaddecuq, vaddeuqm, vaddudm,
vadduqm, vbpermq, vcipher, vcipherlast, vclzb, vclzd, vclzh, vclzw,
vcmpequd, vcmpequd., vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv,
vgbbd, vmaxsd, vmaxud, vminsd, vminud, vmrgow, vmulesw, vmuleuw,
vmulosw, vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc,
vpermxor, vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd,
vpmsumh, vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq, vsubeuqm,
vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp, xscvdpspn, xscvspdpn,
xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp, xsmaddmsp, xsmsubasp,
xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp, xsnmsubasp, xsnmsubmsp,
xsresp, xsrsp, xsrsqrtesp, xssqrtsp, xssubsp, xxleqv, xxlnand,
xxlorc>: Add new tests.
* gas/ppc/power8.s Likewise.
* gas/ppc/vsx.d <lxvd2x, stxvd2x>: Add new tests.
* gas/ppc/vsx.s Likewise.
* gas/ppc/vsx2.d: New test file.
* gas/ppc/vsx2.s: Likewise.
* gas/ppc/ppc.exp: Run it.

*** empty log message ***

daily update

* elf32-vax.c (elf_vax_instantiate_got_entries): Only set the
refcount member of the gotplt_union when resetting the reference
count.  Adjust comment.

* lib/dwarf.exp (Dwarf): New variable _abbrev_section.
(_handle_DW_TAG): Use it.
(cu, tu): Replace parameters is_64, version, addr_size with options.
All callers updated.  Add Fission support.
* gdb.dwarf2/implptrconst.exp: Update callers of "cu".
* gdb.dwarf2/method-ptr.exp: Ditto.
* gdb.dwarf2/nostaticblock.exp: Ditto.
* gdb.dwarf2/subrange.exp: Ditto.
* gdb.dwarf2/missing-sig-type.exp: Update callers of "cu", "tu".

* gdb.gdb/python-selftest.exp: New file.

* python/py-prettyprint.c (search_pp_list): Decref 'attr'.

* python/py-value.c (valpy_get_dynamic_type): Simplify
dynamic_type assignment.  Use Py_XINCREF.

* python/py-type.c (typy_fields): Unconditionally decref 'r'.

* python/py-frame.c (frapy_older, frapy_newer, gdbpy_newest_frame)
(gdbpy_selected_frame): Move object-construction code
out of TRY_CATCH.

* python/py-arch.c (gdbpy_initialize_arch): Use
gdb_pymodule_addobject.
* python/py-block.c (gdbpy_initialize_blocks): Use
gdb_pymodule_addobject.
* python/py-breakpoint.c (gdbpy_initialize_breakpoints): Use
gdb_pymodule_addobject.
* python/py-cmd.c (gdbpy_initialize_breakpoints): Use
gdb_pymodule_addobject.
* python/py-event.c (gdbpy_initialize_event_generic): Use
gdb_pymodule_addobject.
* python/py-evtregistry.c (gdbpy_initialize_eventregistry): Use
gdb_pymodule_addobject.
* python/py-evts.c (add_new_registry): Use
gdb_pymodule_addobject.
(gdbpy_initialize_py_events): Likewise.
* python/py-finishbreakpoint.c
(gdbpy_initialize_finishbreakpoints): Use
gdb_pymodule_addobject.
* python/py-frame.c (gdbpy_initialize_frames): Use
gdb_pymodule_addobject.
* python/py-function.c (gdbpy_initialize_functions): Use
gdb_pymodule_addobject.
* python/py-inferior.c (gdbpy_initialize_inferior): Use
gdb_pymodule_addobject.
* python/py-infthread.c (gdbpy_initialize_thread): Use
gdb_pymodule_addobject.
* python/py-objfile.c (gdbpy_initialize_objfile): Use
gdb_pymodule_addobject.
* python/py-param.c (gdbpy_initialize_parameters): Use
gdb_pymodule_addobject.
* python/py-progspace.c (gdbpy_initialize_pspace): Use
gdb_pymodule_addobject.
* python/py-symbol.c (gdbpy_initialize_symbols): Use
gdb_pymodule_addobject.
* python/py-symtab.c (gdbpy_initialize_symtabs): Use
gdb_pymodule_addobject.
* python/py-type.c (gdbpy_initialize_types): Use
gdb_pymodule_addobject.
* python/py-utils.c (gdb_pymodule_addobject): New function.
* python/py-value.c (gdbpy_initialize_values): Use
gdb_pymodule_addobject.
* python/python-internal.h (gdb_pymodule_addobject): Declare.
* python/python.c (_initialize_python): Use
gdb_pymodule_addobject.

* python/py-cmd.c (cmdpy_completer): Use explicit decref.
* python/py-param.c (get_set_value, get_show_value): Use
explicit decrefs.
* python/python.c (start_type_printers, apply_type_printers):
Use explicit decrefs.

* python/py-evts.c (gdbpy_initialize_py_events): Don't
incref the module.

* python/python.c (gdbpy_run_events): Decref the result
of PyObject_CallObject.

* python/py-symtab.c (set_sal): Use
CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.  Return -1 on error.
(symtab_and_line_to_sal_object): Update.

* python/py-param.c (compute_enum_values): Decref 'item'.

* mi/mi-main.c: Include python-internal.h.
(mi_cmd_list_features): Check gdb_python_initialized.
* python/py-inferior.c (python_on_normal_stop, python_on_resume)
(python_inferior_exit, python_new_objfile, add_thread_object)
(delete_thread_object, py_free_inferior): Check
gdb_python_initialized.
* python/py-prettyprint.c (apply_val_pretty_printer): Check
gdb_python_initialized.
* python/py-type.c (save_objfile_types): Check
gdb_python_initialized.
* python/python-internal.h (gdb_python_initialized): Declare.
* python/python.c (ensure_python_env): Throw exception if
Python not initialized.
(before_prompt_hook, source_python_script_for_objfile)
(start_type_printers, apply_type_printers,
free_type_printers): Check gdb_python_initialized.
* varobj.c (varobj_get_display_hint)
(dynamic_varobj_has_child_method, update_dynamic_varobj_children)
(install_new_value_visualizer, varobj_set_visualizer)
(value_get_print_value): Check gdb_python_initialized.

* python/py-arch.c (gdbpy_initialize_arch): Return 'int'.
Check errors.
* python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'.
* python/py-block.c (gdbpy_initialize_blocks): Return 'int'.
Check errors.
* python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'.
Check errors.
* python/py-cmd.c (gdbpy_initialize_commands): Return 'int'.
Check errors.
* python/py-event.c (gdbpy_initialize_event): Return 'int'.
Check errors.
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated
init function to return 'int'.
* python/py-evtregistry.c (gdbpy_initialize_eventregistry):
Return 'int'.  Check errors.
* python/py-evts.c (gdbpy_initialize_py_events): Return 'int'.
Check errors.
* python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints):
Return 'int'.  Check errors.
* python/py-frame.c (gdbpy_initialize_frames): Return 'int'.
Check errors.
* python/py-function.c (gdbpy_initialize_functions): Return 'int'.
Check errors.
* python/py-gdb-readline.c (gdbpy_initialize_gdb_readline):
Check errors.
* python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'.
Check errors.
* python/py-infthread.c (gdbpy_initialize_thread): Return 'int'.
Check errors.
* python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'.
Check errors.
* python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'.
Check errors.
* python/py-param.c (gdbpy_initialize_parameters): Return 'int'.
Check errors.
* python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'.
Check errors.
* python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'.
Check errors.
* python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'.
Check errors.
* python/py-type.c (gdbpy_initialize_types): Return 'int'.
Check errors.
* python/py-value.c (gdbpy_initialize_values): Return 'int'.
Check errors.
* python/python-internal.h (gdbpy_initialize_auto_load,
gdbpy_initialize_values, gdbpy_initialize_frames,
gdbpy_initialize_symtabs, gdbpy_initialize_commands,
gdbpy_initialize_symbols, gdbpy_initialize_symtabs,
gdbpy_initialize_blocks, gdbpy_initialize_types,
gdbpy_initialize_functions, gdbpy_initialize_pspace,
gdbpy_initialize_objfile, gdbpy_initialize_breakpoints,
gdbpy_initialize_finishbreakpoints,
gdbpy_initialize_lazy_string, gdbpy_initialize_parameters,
gdbpy_initialize_thread, gdbpy_initialize_inferior,
gdbpy_initialize_eventregistry, gdbpy_initialize_event,
gdbpy_initialize_py_events, gdbpy_initialize_stop_event,
gdbpy_initialize_signal_event,
gdbpy_initialize_breakpoint_event,
gdbpy_initialize_continue_event,
gdbpy_initialize_exited_event, gdbpy_initialize_thread_event,
gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch):
Update.  Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
* python/python.c (gdb_python_initialized): New global.
(gdbpy_initialize_events): Return 'int'.  Check errors.
(_initialize_python): Check errors.  Set
gdb_python_initialized.

* python/py-finishbreakpoint.c (bpfinishpy_out_of_scope):
Decref the reslut of PyObject_CallMethod.

* python/py-event.c (gdbpy_initialize_event_generic): Return
early if PyType_Ready fails.

* python/py-type.c (make_fielditem): Add gdb_assert_not_reached
as 'default' in the switch.

* python/py-inferior.c (gdbpy_inferiors): Update.  Hoist
get_addr_from_python calls out of TRY_CATCH.
(infpy_write_memory, infpy_search_memory): Likewise.
* python/py-utils.c (get_addr_from_python): Return negative
value on error.  Use TRY_CATCH.
* python/python-internal.h (get_addr_from_python): Use
CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.

* gdb.base/maint.exp: Fix test for "mt expand-symtabs" to account for
-fdebug-types-section.

* python/py-event.c (evpy_emit_event): Decref the
result of PyObject_CallFunctionObjArgs.

* python/py-cmd.c (cmdpy_completer): Use iterator protocol.
Correctly decref.

* python/py-cmd.c (cmdpy_init): Decref 'ds_obj'.

* python/py-event.h (gdbpy_initialize_event_generic): Use
CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
* python/py-evts.c (add_new_registry): Use
CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION.
* python/python-internal.h
(CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION): New macro.

* python/py-arch.c (archpy_disassemble): Update.
* python/py-type.c (typy_get_composite, typy_lookup_typename)
(typy_lookup_type): Use GDB_PY_HANDLE_EXCEPTION.
* python/py-utils.c (gdbpy_convert_exception): Return 'void'.
* python/python-internal.h (CPYCHECKER_SETS_EXCEPTION): New
macro.
(GDB_PY_HANDLE_EXCEPTION): Update.
(gdbpy_convert_exception): Update.  Use CPYCHECKER_SETS_EXCEPTION.

* python/python-internal.h (events_object_type): Remove.

    * python/py-event.h (evpy_emit_event): Use
        CPYCHECKER_STEALS_REFERENCE_TO_ARG.
        * python/python-internal.h (CPYCHECKER_STEALS_REFERENCE_TO_ARG):
        New macro.

* py-evtregistry.c (create_event_object): Decref
eventregistry_object if PyList_New fails.

* py-cmd.c (gdbpy_string_to_argv): Check result of
PyList_New.

* python/python.c (before_prompt_hook): Add cleanup to
decref 'hook'.

* python/py-function.c (fnpy_init): Decref result of
PyObject_GetAttrString.

* python/py-threadevent.c (get_event_thread): Use
CPYCHECKER_RETURNS_BORROWED_REF.
* python/python-internal.h (CPYCHECKER_RETURNS_BORROWED_REF):
New define.
(pspace_to_pspace_object, objfile_to_objfile_object)
(find_thread_object): Use it.

* python/py-arch.c (arch_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-block.c (block_syms_iterator_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-bpevent.c (breakpoint_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-cmd.c (cmdpy_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-continueevent.c (continue_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-event.h (GDBPY_NEW_EVENT_TYPE):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-events.h (thread_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-evtregistry.c (eventregistry_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-exitedevent.c (exited_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-finishbreakpoint.c (finish_breakpoint_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-function.c (fnpy_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-inferior.c (inferior_object_type, membuf_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-infthread.c (thread_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-lazy-string.c (lazy_string_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-newobjfileevent.c (new_objfile_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-objfile.c (objfile_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-param.c (parmpy_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-progspace.c (pspace_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-signalevent.c (signal_event_object_type):
Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-symtab.c (symtab_object_type, sal_object_type): Use
CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-type.c (type_object_type, field_object_type)
(type_iterator_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.
* python/py-internal.h (CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF): New
define.
(value_object_type, block_object_type, symbol_object_type)
(event_object_type, stop_event_object_type, breakpoint_object_type)
(frame_object_type): Use CPYCHECKER_TYPE_OBJECT_FOR_TYPEDEF.

2013-05-20  Andreas Tobler  <andreas@fgznet.ch>

        * Makefile.in (ALL_TARGET_OBS): Add ppcfbsd-tdep.o.
        (ALLDEPFILES): Add ppcfbsd-nat.c and ppcfbsd-tdep.c.

When reading CU, stay in DWO.  Be more tolerent of bad debug info.
For Fission.
* dwarf2read.c (struct dwarf2_per_cu_data): New member
reading_dwo_directly.
(struct signatured_type): New member dwo_unit.
(struct die_reader_specs): New member comp_dir.
(create_signatured_type_table_from_index): Use malloc for
all_type_units instead of objfile's obstack.
(create_all_type_units): Ditto.
(fill_in_sig_entry_from_dwo_entry): New function.
(add_type_unit): New function.
(lookup_dwo_signatured_type): New function.
(lookup_dwp_signatured_type): New function.
(lookup_signatured_type): New arg cu.  All callers updated.
(init_cu_die_reader): Initialize comp_dir.
(read_cutu_die_from_dwo): New arg stub_comp_dir.  All callers updated.
Change assert of matching type signatures to call error on mismatch.
(lookup_dwo_unit): Add assert.
(init_tu_and_read_dwo_dies): New function.
(init_cutu_and_read_dies): Call it.
(build_type_unit_groups): Handle case of no type unit groups created.
(hash_dwo_file, eq_dwo_file): Handle missing comp_dir.
(lookup_dwo_cutu): Tweak complaint.
(dwarf2_free_abbrev_table): Check for NULL abbrev_table.
(dwarf2_per_objfile_free): Free all_type_units.

bfd/elf64-aarch64.c: Remove dead code.

The relocs_copied member is never assigned a non-NULL value, so
this code does not appear to be used.

bfd/ChangeLog:

2013-05-20  Will Newton  <will.newton@linaro.org>

* elf64-aarch64.c (elf64_aarch64_link_hash_entry): Remove
relocs_copied member.
(elf64_aarch64_link_hash_newfunc): Remove initialization of
relocs_copied member.
(elf64_aarch64_copy_indirect_symbol): Remove code to copy
relocs_copied member.

Add missing empty line after var declarations in handle_unload_dll

gdb/ChangeLog:

        * windows-nat.c (handle_unload_dll): Add missing empty line.

* config/tc-ppc.c (md_apply_fix): Hoist code common to insn
and data fixups performing shift/high adjust/sign extension on
fieldval.  Sink fx_pcrel handling and checks.  Use fixP->fx_size
when writing data fixups rather than recalculating size.

[dwarf] Mark all functions as prototyped except C functions.

This makes sure that the types of the arguments are taken into account
when performing an inferior function call to a non-C (or C-like)
function.  In particular, this makes sure that the arguments are
appropriatly converted to the correct type.

For instance, on x86_64-linux, with the following Ada code:

   procedure Set_Float (F : Float) is
   begin
      Global_Float := F;
   end Set_Float;

The following sequence shows that Float arguments are incorrectly
passed (Ada's Float type is the equivalent of type "float" in C):

    (gdb) call set_float (2.0)
    (gdb) print global_float
    $1 = 0.0

Putting a breakpoint inside set_float to inspect the value of
register xmm0 gives the first hint of the problem:

    (gdb) p $xmm0
    $2 = (v4_float => (0 => 0.0, 2.0, 0.0, 0.0),
          v2_double => (0 => 2.0, 0.0),
    [...]

It shows that the argument was passed as a double.

The code responsible for doing appropriate type conversions
for the arguments (value_arg_coerce) found that our function
was not prototyped, and thus could not use typing information
for the arguments. Instead, it defaulted to the value of "set
coerce-float-to-double", which by default is true, to determine
the argument type.

This patch fixes the problem by setting the PROTOTYPE flag
for all functions of any language except C and Objective C.

gdb/ChangeLog:

        * dwarf2read.c (prototyped_function_p): New function.
        (read_subroutine_type): Use it.

gdb/testsuite/ChangeLog:

        * gdb.ada/float_param: New testcase.

De-indent example code in rs6000-aix-tdep.c (ARI fix)

This patch de-indents the code provided as a comment explaining
how the code declaring the ld_info32_desc and ld_info64_desc globals
was generated. The intent is to avoid an ARI warning about a macro
not starting at column zero of the line.

gdb/ChangeLog:

        * rs6000-aix-tdep.c: De-indent some example code provided
        as a comment.

daily update

*** empty log message ***

* elf32-vax.c (elf_vax_adjust_dynamic_symbol): Convert K&R
function definition.

*** empty log message ***

daily update

daily update

*** empty log message ***

2013-05-17  Edjunior Machado  <emachado@linux.vnet.ibm.com>

* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Check if the
region is ok for a hardware watchpoint using the new ptrace interface
on Power servers.

* NEWS: Mention new maintenance commands check-symtabs, and
expand-symtabs, and renamed check-psymtabs.
* psymtab.c (maintenance_check_psymtabs): Renamed from
maintenance_check_symtabs.  Only process already-expanded symbol
tables.
(_initialize_psymtab): Update.
* symmisc.c (maintenance_check_symtabs): New function.
(maintenance_expand_name_matcher): New function
(maintenance_expand_file_matcher): New function
(maintenance_expand_symtabs): New function.
(_initialize_symmisc): Add "mt check-symtabs" and "mt expand-symtabs"
commands.

doc/
* gdb.texinfo (Maintenance Commands): Update doc for
"maint check-psymtabs".  Add doc for "maint check-symtabs",
"maint expand-symtabs".

testsuite/
* gdb.base/maint.exp: Update test for "maint check-psymtabs".
Add tests for "maint check-symtabs", "maint expand-symtabs".

* gdb.base/maint.exp: Remove testing of individual maint command
help output.

* python/py-inferior.c (infpy_read_memory): Don't call
PyErr_SetString if PyObject_New fails.
* python/py-frame.c (frame_info_to_frame_object): Don't call
PyErr_SetString if PyObject_New fails.

Replace hardcoded -ldl with check for availability

2013-05-17  Pavel Chupin  <pavel.v.chupin@intel.com>

* acinclude.m4: Add check for dlopen in libdl.
* configure.ac: Ditto.
* configure: Regenerate.

* ia64-raw.tbl: Replace non-ASCII char.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerate.

2013-05-17  Phil Muldoon  <pmuldoon@redhat.com>

* frame.c (frame_stash): Convert to htab.
(frame_addr_hash): New function.
(frame_addr_hash_eq): New function.
(frame_stash_create): Convert function to create
a hash table.
(frame_stash_add): Convert function to add an entry to a hash
table.
(frame_stash_find): Convert function to search the hash table.
(frame_stash_invalidate): Convert function to empty the hash
table.
(get_frame_id): Only add to stash if a frame_id is created.
(_initialize_frame): Call frame_stash_create.

Mark the following commit as tiny change:

gdb/
2013-05-16  Yue Lu  <hacklu.newborn@gmail.com>

* configure.ac: Ensure MIG is available when building for GNU Hurd
hosts.
* configure: Regenerate.

[gdbserver/lynx178]: Fix null_ptid -vs- minus_one_ptid confusion in comment

gdb/gdbserver/ChangeLog:

        * lynx-low.c (lynx_resume): Fix null_ptid/minus_one_ptid
        confusion in comment.

gdbserver/lynx178: spurious SIG61 signal when resuming inferior.

On ppc-lynx178, resuming the execution of a program after hitting
a breakpoint sometimes triggers a spurious SIG61 event:

    (gdb) cont
    Continuing.

    Program received signal SIG61, Real-time event 61.
    [Switching to Thread 39]
    0x10002324 in a_test.task1 (<_task>=0x3ffff774) at a_test.adb:30
    30          select  -- Task 1

From this point on, continuing again lets the signal kill the program.
Using "signal 0" or configuring GDB to discard the signal does not
help either, as the program immediately reports the same signal again.

What happens is the following:

  - GDB sends a single-step order to gdbserver: $vCont;s:31
    This tells GDBserver to do a step using thread 0x31=49.
    GDBserver does the step, and thread 49 receives the SIGTRAP
    indicating that the step has finished.

  - GDB then sends a "continue", but this time does not specify
    which thread to continue: $vCont;c
    GDBserver uses an arbitrary thread's ptid to resume the program's
    execution (the current_inferior's ptid was chosen for that).
    See lynx-low.c:lynx_resume:

        if (ptid_equal (ptid, minus_one_ptid))
          ptid = thread_to_gdb_id (current_inferior);

So far on all LynxOS platforms, this has been good enough. But
not so on LynxOS 178. If the ptid used to resume the execution
is not the same as the thread that did the step, we get the weird
signal.

This patch fixes the problem by saving the ptid of the thread
that last caused an event, received during a call to waitpid.
The ptid is saved in per-process private data.

gdb/gdbserver/ChangeLog:

        * lynx-low.c (struct process_info_private): New type.
        (lynx_add_process): New function.
        (lynx_create_inferior, lynx_attach): Replace calls to
        add_process by calls to lynx_add_process.
        (lynx_resume): If PTID is null, then try using
        current_process()->private->last_wait_event_ptid.
        Add comments.
        (lynx_clear_inferiors): Delete.  The contents of that function
        has been inlined in lynx_mourn;
        (lynx_wait_1): Save the ptid in the process's private data.
        (lynx_mourn): Free the process' private data.  Replace call
        to lynx_clear_inferiors by call to clear_inferiors.

gdb/gdbserver
* i386-low.c (i386_length_and_rw_bits): Move the comment to
the right place.

*** empty log message ***

daily update

gdb/
2013-05-16  Yue Lu  <hacklu.newborn@gmail.com>

* configure.ac: Ensure MIG is available when building for GNU Hurd
hosts.
* configure: Regenerate.

* doc/c-msp430.texi: Fix typo.
also: * ChangeLog: Fix entry.

bfd/
* ecoff.c (ecoff_link_check_archive_element): Add initializers for
external_ext_size and esize.

bfd/
2013-05-16  Tristan Gingold  <gingold@adacore.com>

* coff-rs6000.c (_bfd_xcoff_reloc_type_lookup): Handle BFD_RELOC_16.
* coff64-rs6000.c (xcoff64_reloc_type_lookup): Likewise.

gas/
2013-05-16  Tristan Gingold  <gingold@adacore.com>

* config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
are also TOC symbols.

2013-05-16  Tristan Gingold  <gingold@adacore.com>

        * gas/ppc/ppc.exp: Do not run simpshft on aix.

* config/tc-msp430.c: Make -mmcu recognise more part numbers.
Add -mcpu command to specify core type.
* doc/c-msp430.c: Update documentation.
* gas/msp430/opcodes.s: Use correct value for .arch pseudo.
* gas/msp430/msp430x.d: Use correct value for -mcpu option.

* linux-low.c: Move definition checks upwards for PT_TEXT_ADDR,
PT_DATA_ADDR and PT_TEXT_END_ADDR.  Update comments.
(linux_read_offsets): Remove PT_TEXT_ADDR, PT_DATA_ADDR and
PT_TEXT_END_ADDR guards.  Update comments.
(linux_target_op) <read_offsets>: Conditionally define to
linux_read_offsets if the target is UCLIBC and if it defines
PT_TEXT_ADDR, PT_DATA_ADDR and PT_TEXT_END_ADDR.

gdb.ada/complete.exp: Fix FIXME.

2013-05-16  Pedro Alves  <palves@redhat.com>

* gdb.ada/complete.exp (test_gdb_no_completion): Fix typo in
comment.  Use gdb_test_no_output.

[dwarf]: Add DW_LANG_UPC support in set_cu_language.

gdb/ChangeLog:

        * dwarf2read.c (set_cu_language): Add DW_LANG_UPC handling.

Missing do_cleanups in ada_make_symbol_completion_list.

This results in an internal-warning when trying the completion
when in Ada mode:

    (gdb) b simple<TAB>
    /[...]/cleanups.c:265: internal-warning: restore_my_cleanups has found a stale cleanup
    A problem internal to GDB has been detected,
    further debugging may prove unreliable.
    Quit this debugging session? (y or n)

gdb/ChangeLog:

        * ada-lang.c (ada_make_symbol_completion_list): Make sure
        all cleanups are done before returning from this function.

gdb/testsuite/ChangeLog:

        * gdb.ada/complete.exp: Add test verifying completion using
        the "tab" key.

daily update

*** empty log message ***

* gdb.base/filesym.exp: New completer test.
* gdb.base/filesym.c: New file.

sim: arm: add support for MOVW and MOVT instructions

From: Jayant R. Sonar <Jayant.Sonar@kpitcummins.com>

This patch adds simulator support for handling the armv7 instructions
'movw (immediate)' and 'movt'.

Compiler frequently use these instructions to load the 32bit addresses of
global variables, string pointers etc. into the general registers.

In absence of support of these instructions:
1. GDB run simulator fails to print even simple "hello world" string
   on console.
2. Loading of global variable addresses into the registers fail causing
   arithmetic operation failures.

Patch has been regression tested for arm-none-eabi (-march=armv7-a).

Remove my name from a couple tests.

Tested on x86_64 Fedora 17.

gdb/testsuite/
2013-05-15  Pedro Alves  <palves@redhat.com>

* gdb.base/fixsection.c: Remove attribution.
* gdb.base/watch-read.exp: Ditto.

binutils/
* dwarf.c (SAFE_BYTE_GET64): Correct end-of-buffer check;
don't increment PTR.
(decode_location_expression): DW_OP_const2u should read 2 bytes.
(display_debug_lines_decoded): Adjust formatting.
* elfcomm.c (byte_get_little_endian): Add cases for 5-, 6-, and
7-byte reads.
(byte_get_big_endian): Likewise.
(byte_get_signed): Likewise.

Remove forward enum declaration in utils.h.

These forward declarations are a GNU extension, and they trigger
a build warning when the compiler does not support it.

gdb/ChangeLog:

        * utils.h: #include "exceptions.h".
        (enum errors): Remove partial declaration.

ppc-aix core file relocation.

The current code attempts to provide relocation support when debugging
core files via the rs6000_xfer_partial method of the rs6000-nat
target_ops vector. However, this target_ops vector does not get pushed
on the target stack at all when debugging core files, thus bypassing
completely that part of the code.

This patch fixes the problem by extending corelow's core_xfer_partial
into handling the TARGET_OBJECT_LIBRARIES_AIX object.

gdb/ChangeLog:

* gdbarch.sh (core_xfer_shared_libraries_aix): New method.
* gdbarch.h, gdbarch.c: Regenerate.
* corelow.c (core_xfer_partial): Add TARGET_OBJECT_LIBRARIES_AIX
handling.

* rs6000-aix-tdep.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add rs6000-aix-tdep.h.
* rs6000-aix-tdep.c: Include "rs6000-aix-tdep.h" and
"xml-utils.h".
(struct field_info, struct ld_info_desc): New types.
(ld_info32_desc, ld_info64_desc): New static constants.
(struct ld_info): New type.
(rs6000_aix_extract_ld_info): New function.
(rs6000_aix_shared_library_to_xml): Likewise.
(rs6000_aix_ld_info_to_xml): Likewise.
(rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
(rs6000_aix_init_osabi): Add call to
set_gdbarch_core_xfer_shared_libraries_aix.
* rs6000-nat.c: Add "rs6000-aix-tdep.h" include.
Remove "xml-utils.h" include.
(LdInfo): Delete typedef.
(ARCH64_DECL, LDI_FIELD, LDI_NEXT, LDI_FD, LDI_FILENAME):
Delete macros.
(rs6000_ptrace_ldinfo): Change return type to gdb_byte *.
Adjust code accordingly.
(rs6000_core_ldinfo): Delete, folded into
rs6000_aix_core_xfer_shared_libraries_aix.
(rs6000_xfer_shared_library): Delete.
(rs6000_xfer_shared_libraries): Reimplement.

The "record goto" command scans its arguments for "begin", "start", or "end".
Turn those into sub-commands.

Document the "record goto" command.

* elf64-aarch64.c (elf_backend_default_execstack): Define to 0.

gas/
* i386-gen.c (cpu_flag_init): Add CpuFSGSBase in CPU_BDVER3_FLAGS.
* i386-init.h: Regenerated.

*** empty log message ***

daily update

gdb/
* linespec.c (convert_linespec_to_sals): New comment for
SOURCE_FILENAME assignment.

gdb/
* cleanups.c (restore_my_cleanups): Replace gdb_assert by
internal_warning.

* eval.c (parse_and_eval_long): Make 'exp' const.
* value.h (parse_and_eval_long): Update.

* ui-file.c (gdb_fopen): Make arguments const.
* ui-file.h (gdb_fopen): Make arguments const.

* remote.c (remote_set_trace_notes): Make arguments const.
* target.c (update_current_target): Update cast.
* target.h (to_set_trace_notes): Make arguments const.

* go32-nat.c (go32_terminal_info): Make 'args' const.
* inferior.h (child_terminal_info): Update.
* inflow.c (child_terminal_info): Make 'args' const.
* target.c (default_terminal_info): Make 'args' const.
(debug_to_terminal_save_ours): Likewise.
* target.h (struct target_ops) <to_terminal_info>: Make argument
const.

* gcore.c (create_gcore_bfd): Make 'filename' const.
* gcore.h (create_gcore_bfd): Make 'filename' const.
* record-full.c (record_full_save): Make 'recfilename' const.
* target.c (target_save_record): Make 'filename' const.
* target.h (struct target_ops) <to_save_record>: Make 'filename'
const.
(target_save_record): Likewise.

daily update

*** empty log message ***

Corrected the changelog entry in the previous commit.

gas/

* testsuite/gas/aarch64/diagnostic.s: Update.
* testsuite/gas/aarch64/diagnostic.l: Ditto.
* testsuite/gas/aarch64/movi.s: Add new tests.
* testsuite/gas/aarch64/movi.d: Update.

opcodes/

* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Remove assertion.
* aarch64-opc.c (operand_general_constraint_met_p): Relax the range
check from [0, 255] to [-128, 255].

* gdb.dwarf2/implptrconst.exp: Create a CU with 4 byte address
size and change type sizes to 4 bytes.