ppc-aix: .bss relocation problem when overlapping with the .data section

Add missing ChangeLog entry.

ppc-aix: .bss relocation problem when overlapping with the .data section

It has been observed that the GNU linker can sometimes improperly
set the address of the .bss section in such a way that it overlaps
with the end of the .data section.  This causes problems in GDB
when trying to print the value of variables located in that section,
because the loader appears to be gracefully but silently adjusting
the address of the .bss section to avoid the overlap, thus causing
a mismatch between the address where GDB thinks it is, vs the address
where it actually lives.

This patch works around the problem while it a fix in the linker
is being explored.

gdb/ChangeLog:

        * rs6000-nat.c (bss_data_overlap): New function.
        (vmap_symtab): Use it to adjust the .bss section's offset.

Add make_cleanup_free_command_lines declaration "extern".

gdb/ChangeLog:

* cli/cli-script.h (make_cleanup_free_command_lines): Make extern.

Update years in copyright notice for the GDB files.

Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.

Update years in copyright notice for the GDB files.

Two modifications:
  1. The addition of 2013 to the copyright year range for every file;
  2. The use of a single year range, instead of potentially multiple
     year ranges, as approved by the FSF.

Update copyright year in gdb/gdbserver/gdbreplay version output.

gdb/ChangeLog:

        * top.c (print_gdb_version): Update copyright year.

gdb/gdbserver/ChangeLog:

        * gdbreplay.c (gdbreplay_version): Update copyright year.
        * server.c (gdbserver_version): Likewise.

Rotate gdb's ChangeLog file.

gdb:

        * ChangeLog-2012: Renamed from ChangeLog:
        * ChangeLog: New file.
        * config/djgpp/fnchange.lst: Add entry for ChangeLog-2012.

*** empty log message ***

daily update

gdb/doc/
* gdb.texinfo (Remote Non-Stop): Move paragraphs to ...
(Packets): Move "vStopped" packet to ...
(Notification Packets): ... here.  Describe the components
of notification.  Add a table of supported notifications.
Add an example on the process of he async notification.

*** empty log message ***

daily update

* ld-scripts/pr14962.d: Don't run for mmix-knuth-mmixware.  Add
comment punctuation.

*** empty log message ***

daily update

*** empty log message ***

daily update

gdb/
* symtab.c (find_line_symtab): Call symtab_to_fullname instead of
accessing FULLNAME directly.

*** empty log message ***

daily update

*** empty log message ***

daily update

*** empty log message ***

daily update

2012-12-25  Sergio Durigan Junior  <sergiodj@redhat.com>

* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Fix typo.

gdb/
* ada-lang.c (is_known_support_routine): New variable fullname.  Use
access call to verify the symtab_to_fullname result.
* breakpoint.c (print_breakpoint_location, update_static_tracepoint):
Remove NULL check of symtab_to_fullname result.
* cli/cli-cmds.c (edit_command): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* python/py-symtab.c (stpy_fullname): Likewise.
* source.c (symtab_to_fullname): Update function comment.  Rename
variable r to fd, move it to inner block.  Always provide non-NULL
result.
(print_source_lines_base): Remove NULL check of symtab_to_fullname
result.
* stack.c (print_frame): Likewise.
* symtab.c (iterate_over_some_symtabs, find_line_symtab, sources_info):
Likewise.
* tracepoint.c (print_one_static_tracepoint_marker): Likewise.

gdb/doc/
* gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
present.
(GDB/MI File Commands) (-file-list-exec-source-files): Make the
fullname output always present.

gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: New file.

*** empty log message ***

daily update

gdb/
Code cleanup.
* dwarf2read.c (fixup_go_packaging): Do not check symtab->FILENAME for
NULL.
* linespec.c (add_sal_to_sals): Likewise.
* psympriv.h (allocate_psymtab): Add ATTRIBUTE_NONNULL.
* stack.c (print_frame): Do not check symtab->FILENAME for NULL.
* symfile.h (allocate_symtab): Add ATTRIBUTE_NONNULL.
* symtab.h (struct symtab): Add comment it is never NULL for filename.
* tracepoint.c (set_traceframe_context): Do not check symtab->FILENAME
for NULL.
* tui/tui-source.c (tui_set_source_content): Likewise.

gdb/
* breakpoint.c (breakpoint_re_set): Remove the skip_re_set call.
* infrun.c (handle_inferior_event): Rename the called function to
function_name_is_marked_for_skip, pass it TMP_SAL.
* skip.c (struct skiplist_entry): Update function_name comment.  Remove
fields pc, gdbarch and pending.
(skip_function_pc): Rename this forward declaration to ...
(skip_function): ... here.
(skip_file_command): Remove variable pending and its use, remove
initialization of E fields pending and gdbarch.  Do not use SYMTAB
filename, use the specified one.
(skip_function_command): Remove variable func_pc, do not set it.
Update the caller of skip_function.  Replace decode_line_1 call by
a lookup_symbol call.  Remove variables orig_arg, decode_exception and
sals.  Update the caller of skip_function.
(skip_info): Remove variable address_width and its use.  Do not print
address (PC).  Renumber column 5 to 4.
(skip_function_pc): Rename to ...
(skip_function): ... here and remove its parameters pc, arch and
pending.  Update the function comment and no longer use those
parameters.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, update function comment
just to a skip.h reference, replace pc parameter by function_name and
function_sal.  No longer use E field pending and pc.  Remove variables
searched_for_sal, sal and filename.  Call compare_filenames_for_search
instead of just strcmp.
(skip_re_set): Remove the function.
* skip.h (struct symtab_and_line): New declaration.
(function_pc_is_marked_for_skip): Rename to ...
(function_name_is_marked_for_skip): ... here, replace pc parameter by
function_name and function_sal, update the function comment.

gdb/testsuite/
* gdb.base/skip-solib.exp (info skip with pending file): Update the
expected output.
(info skip with pending file): Remove.
(ignoring function in solib, info skip for function multiply): Update
the expected output.
* gdb.base/skip.ex (skip (main), skip function baz, info skip)
(info skip (delete 1), info skip after disabling all)
(info skip after enabling all, info skip after disabling 4 2-3)
(info skip after enabling 2-3, info skip 2-3)
(info skip after deleting 2 3): Update the expected output.
* gdb.linespec/base/two/thefile.cc (n): New variable v, split the
statement to its initialization and return.
* gdb.linespec/skip-two.exp: New file.

bfd: also enable x86_64pei_vec for 64bit i386-linux targets

We enable x86_64pei_vec for x86_64-linux targets, so we should list this
in the 64bit i386-linux vec section.  This is useful for when we want to
build 64bit EFI code on an i386 system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

*** empty log message ***

daily update

*** empty log message ***

daily update

* ui-file.h (tee_file_new): Add extern modifier in header declaration.

    * gdbint.texinfo (Function prototypes): Require use of "extern"
        modifier for function prototypes in headers.

*** empty log message ***

daily update

Check R_X86_64_standard for unrecognized relocation

* elf64-x86-64.c (elf_x86_64_relocate_section): Check
R_X86_64_standard instead of R_X86_64_max for unrecognized
relocation.

Properly adjust h->plt.refcount

bfd/

PR ld/14980
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): Properly
adjust h->plt.refcount.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol): Likewise.

ld/testsuite/

PR ld/14980
* ld-ifunc/ifunc-14c.s: New file.
* ld-ifunc/ifunc-14e-i386.d: Likewise.
* ld-ifunc/ifunc-14e-x86-64.d: Likewise.
* ld-ifunc/ifunc-14f-i386.d: Likewise.
* ld-ifunc/ifunc-14f-x86-64.d: Likewise.

* layout.cc (Layout::special_ordering_of_input_section): New
function.
(Layout::layout): If input section requires special ordering, must
sort input sections.
(Layout::make_output_section): May sort .text input sections.
(Layout::is_section_name_prefix_grouped): Remove.
* layout.h (class Layout): Declare
special_ordering_of_input_section.  Don't declare
is_section_name_prefix_grouped.
* output.cc (Output_section::add_input_section): Revert last
change.
(Output_section::Input_section_sort::match_file_name): Don't crash
if called on output section data.
(Output_section::Input_section_sort_compare): Sort based on
special ordering.
(Output_section::Input_section_sort_section_order_index_compare):
Revert last patch.
(Output_section::sort_attached_input_sections): Likewise.

*** empty log message ***

daily update

* Makefile.def (install-target-libgo): Depend on
install-target-libatomic. Merged from GCC repo.
* Makefile.in: Regenerate.

Fix commit date in previous commit.

2012-12-20  Greta Yorsh  <Greta.Yorsh@arm.com>

* config/tc-arm.c (rfefa,rfeea,rfeed): Fix encoding.
(rfe,srs,srsea,srsfa,srsed,srsfd): Add missing mnemonics.

* gas/arm/srs-t2.s: Add tests for missing srs modes.
* gas/arm/srs-t2.l: Update expected output.
* gas/arm/srs-arm.s: Add tests for missing srs modes.
* gas/arm/srs-arm.l: Update expected output.
* gas/arm/archv6.s: Add tests for missing rfe modes.
* gas/arm/archv6.d: Update expected output.

* serial.c (deprecated_serial_fd): Remove.
* serial.h (deprecated_serial_fd): Remove.

* gdb.base/maint.exp: Handle testing with .gdb_index.

Revert GPL version change in sim/bfin/aclocal.m4

sim/bfin/ChangeLog:

        * aclocal.m4: Revert the previous change changing
        the license from GPL v2 or later to GPL v3 or later
        (this file was generated).

Revert GPL version change in linux-fixed-code.s.

sim/bfin/ChangeLog:

* linux-fixed-code.s: Revert the previous change changing
the license from GPL v2 or later to GPL v3 or later.

gdb/
2012-12-20  Yao Qi  <yao@codesourcery.com>

* maint.c (_initialize_maint_cmds): Move code ...
* symmisc.c (_initialize_symmisc): ... to here.
(maintenance_print_msymbols): Make it static.
(maintenance_print_objfiles): Likewise.
(maintenance_print_symbols): Likewise.
(maintenance_info_symtabs): Likewise.
* symtab.h (maintenance_print_msymbols): Remove declaration.
(maintenance_print_objfiles, maintenance_print_symbols): Likewise.
(maintenance_info_symtabs): Likewise.

gdb/
2012-12-20  Yao Qi  <yao@codesourcery.com>

* maint.c (_initialize_maint_cmds): Move code to ...
* psymtab.c (_initialize_psymtab): ... here.  New.
Include "gdbcmd.h".
(maintenance_print_psymbols): Make it static.
(maintenance_info_psymtabs, maintenance_check_symtabs): Likewise.
* symtab.h (maintenance_print_psymbols): Remove declaration.
(maintenance_check_symtabs, maintenance_info_psymtabs): Likewise.

*** empty log message ***

daily update

* MAINTAINERS: Add myself to write-after-approval maintainers.

2012-12-19  Andreas Tobler  <andreast@neon.andreas.nets>

        * mips-tdep.c (micromips_deal_with_atomic_sequence): Initialize
        branch_bp to keep gcc happy.

Fix indentation in the last checkin

Fix and use elf_append_rel

* elf32-i386.c (elf_i386_relocate_section): Replace
bfd_elf32_swap_reloc_out with elf_append_rel.
(elf_i386_finish_dynamic_symbol): Likewise.

* elflink.c (elf_append_rel): Call swap_reloc_out instead of
swap_reloca_out.

Reindent elf_i386_finish_dynamic_symbol

* elf32-i386.c (elf_i386_finish_dynamic_symbol): Reindent.

Change copyright from Cavium to FSF.

gdb/testsuite/ChangeLog:

        * gdb.arch/mips-octeon-bbit.exp: Fix copyright header from
        Cavium to FSF.

Add copyright header to stubs/buildvms.com.

gdb/stubs/ChangeLog:

        * buildvms.com: Add copyright header.

Fix copyright years in gdbarch.h and gdbarch.c.

copyright.py was updating gdbarch.sh' copyright years, but not
the function that genarates the copyright headers for gdbarch.[hc].

This patch makes the following changes:
  - fixes gdbarch.sh and regenerates gdbarch.[hc]

  - Modify copyright.py to remind the user to update gdbarch.sh
    by hand.  This should also remind the user to rerun the script
    and update gdbarch.[hc] - see next point;

  - Allow copyright.py to update gdbarch.[hc]'c copyright years,
    even though these are generated files;  This should free
    the user from having to update gdbarch.[hc] himself;

gdb/ChangeLog:

        * gdbarch.sh (copyright): Update copyright years.
        * gdbarch.h, gdbarch.c: Regenerate.
        * copyright.py (EXCLUDE_LIST): Remove gdbarch.h and gdbarch.c.
        (MULTIPLE_COPYRIGHT_HEADERS): Add 'gdb/gdbarch.sh'.

update copyright notices in various GDB files.

Update some files in GDB that were accidently left with a GPL v2
copyright header.

Update some files where the copyright notice still provides the
old contact info, using the approach for providing the FSF's contact
info.

gdb/ChangeLog:

        * acinclude.m4: Update contact info in copyright notice.

gdb/doc/ChangeLog:

        * refcard.tex: Update copyright notice to GPL v3 or later.
        Update contact info.

gdb/testsuite/ChangeLog:

        * dg-extract-results.sh: Update contact info in copyright notice.
        * gdb.arch/mips-octeon-bbit.exp: Update copyright notice to
        GPL v3 or later.  Update contact info.
        * gdb.fortran/logical.f90, gdb.threads/watchpoint-fork-child.c,
        gdb.threads/watchpoint-fork-mt.c,
        gdb.threads/watchpoint-fork-parent.c,
        gdb.threads/watchpoint-fork-st.c,
        gdb.threads/watchpoint-fork.h: Likewise.

gdb/
2012-12-19  Yao Qi  <yao@codesourcery.com>

* maint.c (maintenance_print_statistics): Make it static.
* symtab.h (maintenance_print_statistics): Remove declaration.

Update sim's COPYING files.

sim/arm/ChangeLog:

* COPYING: Update to GPL version 3.

sim/ppc/ChangeLog:

* COPYING: Update to GPL version 3.

[sim] Update old contact info in GPL license notices

sim/ChangeLog:

        Update old contact info in GPL license notices.

Update sim copyright headers from GPLv2-or-later to GPLv3-or-later.

gdb/sim/ChangeLog:

        Update the non-FSF-copyrighted files in sim to GPLv3 or later.

NEWS: Announce ppc-lynx178 support.

gdb/ChangeLog:

        * NEWS: Add entry announcing ppc-lynx178 support.

Revert "Import gnulib's errno module."

There are some compatibility concerns with libiconv to be
discussed first.

gdb/ChangeLog:

        Revert the following change:
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add errno.
        * gnulib/import/errno.in.h: Import.
        * gnulib/import/m4/errno_h.m4: Import.
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Update.
        * gnulib/import/Makefile.in: Update.
        * gnulib/import/m4/gnulib-cache.m4: Update.
        * gnulib/import/m4/gnulib-comp.m4: Update.

Group text sections with prefixes .text.unlikely,.text.hot and .text.startup
by default.

2012-12-18  Sriraman Tallam  <tmsriram@google.com>

* layout.cc (Layout::is_section_name_prefix_grouped): New function.
* layout.h (Layout::is_section_name_prefix_grouped): New function.
* output.cc (Output_section::add_input_section): Check if section
name contains special prefix.  Keep input sections to sort such
sections.
(Output_section::Input_section_sort_section_order_index_compare
 ::operator()): Group sections according to prefixes.
* (Output_section::sort_attached_input_sections): Add condition
to Input_section_entry constructor call.
* testsuite/Makefile.am (text_section_grouping): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.cc: New file.
* testsuite/text_section_grouping.sh: New file.

*** empty log message ***

daily update

ld/
* ld.texinfo (Options): Describe -Trodata-segment.
* ldlex.h (enum option_values): Add OPTION_TRODATA_SEGMENT.
* lexsup.c (ld_options, parse_args): Handle -Trodata-segment.
* scripttempl/elf.sc (RODATA_ADDR, SHLIB_RODATA_ADDR): Wrap
SEGMENT_START("rodata-segment", ...) + SIZEOF_HEADERS around the value.

fix some bad ChangeLog dates from today

* defs.h (directory_command): Don't declare.
* source.c (directory_command): Now static.

* infcmd.c (all_registers_info, nexti_command, stepi_command)
(continue_command, interrupt_target_command): Now static.
(registers_info): Remove declaration.
* inferior.h (all_registers_info, nexti_command, stepi_command)
(continue_command, interrupt_target_command): Don't declare.

* cli/cli-cmds.c (apropos_command): Now static.

* breakpoint.c (dprintf_command): Now static.

* Makefile.in (init.c): Declare initialize_all_files;
don't include call-cmds.h.
* call-cmds.h: Remove.
* symtab.c: Don't include call-cmds.h.
* top.c: Don't include call-cmds.h.  Declare
initialize_all_files.

* symfile.c (list_overlays_command, map_overlay_command)
(unmap_overlay_command): Now static.

* cli/cli-cmds.c (_initialize_cli_cmds): Remove "document",
"define", "while", and "if" commands.
* cli/cli-script.c (while_command, if_command, define_command)
(document_command): Now static.
(_initialize_cli_script): New function.
* cli/cli-script.h (while_command, if_command, define_command)
(document_command): Don't declare.

* cli/cli-cmds.c (_initialize_cli_cmds): New function.
(init_cli_cmds): Move most code into new function.

* minsyms.c (lookup_solib_trampoline_symbol_by_pc): Now static.
* minsyms.h (lookup_solib_trampoline_symbol_by_pc): Don't
declare.

merge from gcc

PR ld/14736
bfd:
* elf32-microblaze.c (calc_fixup): Add end range.
gas/testsuite:
* gas/microblaze/relax_size.exp: New file - test object size after linker
relaxation
* gas/microblaze/relax_size.s: Likewise
* gas/microblaze/relax_size.elf: Likewise
* gas/microblaze/relax_size2.s: Likewise
* gas/microblaze/relax_size2.elf: Likewise

Port GDB to powerpc-lynx178.

gdb/ChangeLog:

        * defs.h (enum gdb_osabi): Add GDB_OSABI_LYNXOS178.
        * osabi.c (gdb_osabi_names): Add entry for GDB_OSABI_LYNXOS178.
        * xcoffread.c (xcoff_get_core_n_import_files): New function.
        (xcoff_get_n_import_files): New function.
        * xcoffread.h (xcoffread.h): Add declaration.
        * rs6000-aix-tdep.c: #include "xcoffread.h".
        (rs6000_aix_osabi_sniffer): Do not return GDB_OSABI_AIX for
        XCOFF executables that do not depend on any shared library.
        * rs6000-lynx178-tdep.c: New file.
        * configure.tgt: Add powerpc-*-lynx*178 handling.
        * Makefile.in (ALL_TARGET_OBS): Add rs6000-lynx178-tdep.o.
        (ALLDEPFILES): Add rs6000-lynx178-tdep.c.

PR ld/14962
* ld-scripts/pr14962.d, * ld-scripts/pr14962.t,
* ld-scripts/pr14962a.s, * ld-scripts/pr14962b.s: New test.
* ld-scripts/expr.exp: Run it.

* elf.c (swap_out_syms): Set shndx to SHN_ABS when not one of
the special MAP_* values.

Fix ChangeLog format.

2012-12-18  Hui Zhu  <hui_zhu@mentor.com>

* ui-file.c (ui_file): Add to_fseek.
(ui_file_new): Call set_ui_file_fseek.
(null_file_fseek, ui_file_fseek, set_ui_file_fseek,
 stdio_file_fseek): New functions.
(stdio_file_new): Call set_ui_file_fseek.
* ui-file.h (ui_file_fseek_ftype): New typedef.
(set_ui_file_fseek, ui_file_fseek): New externs.

2012-12-18  Hui Zhu  <hui_zhu@mentor.com>

* ui-file.c (set_ui_file_flush): Change flush to flush_ptr.
(set_ui_file_isatty): Change isatty to isatty_ptr.
(set_ui_file_rewind): Change rewind to rewind_ptr.
(set_ui_file_put): Change put to put_ptr.
(set_ui_file_write): Change write to write_ptr.
(set_ui_file_write_async_safe): Change write_async_safe to
write_async_safe_ptr.
(set_ui_file_read): Change read to read_ptr.
(set_ui_file_fputs): Change fputs to fputs_ptr.
(set_ui_file_data): Change delete to delete_ptr.

solib-darwin.c: handle PIE when attaching processes.

gdb/ChangeLog:

        * solib-darwin.c (darwin_current_sos): Fix indentation.
        (darwin_read_exec_load_addr): New function.
        (darwin_solib_create_inferior_hook): Rebase executable.
        * objfiles.c (objfile_rebase1, objfile_rebase): New functions.
        * objfiles.h (objfile_rebase1, objfile_rebase): Add prototypes.

Import gnulib's errno module.

gdb/ChangeLog:

        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add errno.
        * gnulib/import/errno.in.h: Import.
        * gnulib/import/m4/errno_h.m4: Import.
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Update.
        * gnulib/import/Makefile.in: Update.
        * gnulib/import/m4/gnulib-cache.m4: Update.
        * gnulib/import/m4/gnulib-comp.m4: Update.

Update gnulib to current HEAD.

gdb/ChangeLog:

        * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
        8d5bd1402003bd0153984b138735adf537d960b0.
        * gnulib/aclocal.m4, configure, config.in: Regenerate.
        * gnulib/import/m4/extern-inline.m4: Import.
        * gnulib/import/wctype-h.c: Import.
        * gnulib/import/Makefile.am: Update.
        * gnulib/import/Makefile.in: Update.
        * gnulib/import/alloca.in.h: Update.
        * gnulib/import/extra/snippet/warn-on-use.h: Update.
        * gnulib/import/localcharset.c: Update.
        * gnulib/import/m4/fcntl-o.m4: Update.
        * gnulib/import/m4/gnulib-cache.m4: Update.
        * gnulib/import/m4/gnulib-comp.m4: Update.
        * gnulib/import/m4/wctype_h.m4: Update.
        * gnulib/import/stdbool.in.h: Update.
        * gnulib/import/verify.h: Update.
        * gnulib/import/wctype.in.h: Update.

Fix author in last ChangeLog entry.

Add call to autoheader in update-gnulib.sh.

gdb/ChangeLog:

        * gnulib/update-gnulib.sh: Add call to autoheader.

*** empty log message ***

daily update

Enable accidentally commented out code.