* dwarf.c (dw_TAG_name): Handle DW_TAG_GNU_call_site_parameter.
(read_and_display_attr_value): Handle DW_AT_GNU_call_site_data_value,
DW_AT_GNU_call_site_target and DW_AT_GNU_call_site_target_clobbered.
(get_AT_name): Handle DW_AT_GNU_call_site_value,
DW_AT_GNU_call_site_data_value, DW_AT_GNU_call_site_target,
DW_AT_GNU_call_site_target_clobbered, DW_AT_GNU_tail_call,
DW_AT_GNU_all_tail_call_sites, DW_AT_GNU_all_call_sites and
DW_AT_GNU_all_source_call_sites.
(decode_location_expression) <case DW_OP_GNU_entry_value>: Adjust
handling.

* dwarf.c (get_TAG_name): Handle DW_TAG_GNU_call_site.
(decode_location_expression): Handle DW_OP_GNU_entry_value.
(read_and_display_attr_value): Handle DW_AT_GNU_call_site_value.
(get_AT_name): Likewise.

Add --size-check=[error|warning].

gas/

2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>

* as.c (show_usage): Add --size-check=.
(parse_args): Add and handle OPTION_SIZE_CHECK.

* as.h (flag_size_check): New.

* config/obj-elf.c (elf_frob_symbol): Use as_bad to report
bad .size directive only for --size-check=error.

* doc/as.texinfo: Document --size-check=.

gas/testsuite/

2011-03-16  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/bad-size.d: New.
* gas/i386/bad-size.s: Likewise.
* gas/i386/bad-size.warn: Likewise.

* gas/i386/i386.exp: Run bad-size for ELF targets.

2011-03-16  Phil Muldoon  <pmuldoon@redhat.com>

* NEWS: Add Parameter sub-classing description.

* dwarf2.h (DW_TAG_GNU_call_site, DW_TAG_GNU_call_site_parameter,
DW_AT_GNU_call_site_value, DW_AT_GNU_call_site_data_value,
DW_AT_GNU_call_site_target, DW_AT_GNU_call_site_target_clobbered,
DW_AT_GNU_tail_call, DW_AT_GNU_all_tail_call_sites,
DW_AT_GNU_all_call_sites,, DW_AT_GNU_all_source_call_sites,
DW_OP_GNU_entry_value): New.

2011-03-16  Kai Tietz  <ktietz@redhat.com>

        * MAINTAINERS: Update my e-mail address.

*** empty log message ***

ld: vers19 test: add -rpath-link

Using -Wl,-rpath,. isn't sufficient for cross-linkers to locate the
necessary libraries.  So throw in -Wl,-rpath-link,. to make it work.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

daily update

2011-03-15  Andreas Tobler  <andreast@fgznet.ch>

* gdb.base/jit-main.c: Define ElfW for non glibc elf targets.

sim: bfin: add GPIO device simulation

This takes care of the MMR interface and pushing up interrupts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-03-15  Andreas Tobler  <andreast@fgznet.ch>

* MAINTAINERS: Add myself for write after approval privileges.

sim: bfin: fix brace style

sim: bfin: fix brace style

sim: bfin: handle AZ updates with 16bit adds/subs

We weren't updating AZ when doing a 16bit add or sub insn.  Implement it.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: skip acc/ASTAT updates for moves

No point in moving unchanged acc values to the acc regs, and avoid
updating the acc ASTAT bits when only reading.  This fixes incorrect
changing of the ASTAT bits when they're only being read.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: handle AN (negative overflows) in dsp mult insns

The current dsp mult handler does not take care of overflows which turn
values negative (and thus set AN in ASTAT).  So implement it.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: handle V overflows in dsp mult insns

The current dsp mult handler does not take care of overflows and updating
the V ASTAT bit.  So implement it.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: decode ASTAT on failure

When testing ASTAT regs, specific bit differences carry a lot more meaning
than when checking the value of a data register.  So automatically decode
the bits of the two values and print things out so that people don't have
to manually do it themselves every time.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: bfin: handle saturation with fract multiplications

The saturation behavior with fract modes differs from non-fract modes.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-03-15  Michael Snyder  <msnyder@vmware.com>

* frame.c (find_frame_sal): Assert sym is not null.

2011-03-04  Michael Snyder  <msnyder@msnyder-server.eng.vmware.com>

* dbxread.c (process_one_symbol): Assert 'name' is not null.

2011-03-04  Michael Snyder  <msnyder@msnyder-server.eng.vmware.com>

* objc-lang.c (selectors_info): Check strchr for null result.

2011-03-04  Michael Snyder  <msnyder@vmware.com>

* stabsread.c (define_symbol): Guard against bad stabstring input.

2011-03-15  Phil Muldoon  <pmuldoon@redhat.com>

    * lib/gdb.exp (gdb_unload): Add another termination case.

Remove trailing spaces and tabulations from pascal language
support sources.
p-exp.y: Ditto.
p-lang.c: Ditto.
p-lang.h: Ditto.
p-valprint.c: Ditto.

gdb/
* dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
than LOW.  Comment it.
(read_partial_die): Call complaint for inappropriate zero LOWPC or
HIGHPC not strictly higher than LOWPC.

gdb/testsuite/
* gdb.dwarf2/dw2-empty-pc-range.S: New file.
* gdb.dwarf2/dw2-empty-pc-range.exp: New file.
* gdb.dwarf2/pr11465.S: New .text labels text_start and text_end.
Provide a stub byte there.
(DW_TAG_compile_unit): Set DW_AT_low_pc, DW_AT_high_pc and
DW_AT_entry_pc.
(dieb4, dieda): Set DW_AT_high_pc higher than DW_AT_low_pc.

Fix formatting of function declarations returning a pointer in
previous commit.
* varobj.c (varobj_add_child): Ditto.
* hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
* inferior.h (get_displaced_step_closure_by_addr): Ditto.

gdb/
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
for the "generic" vector ABI used with GCC 4.3 and later.
(ppc64_sysv_abi_return_value): Likewise.

gdb/testsuite:
* gdb.arch/altivec-abi.exp: Skip "generic" tests on 64-bit when
using a GCC 4.1 or 4.2 compiler.  Add an additional test variant
"generic ABI, auto".
(altivec_abi_tests): Accept vectors returned by reference.

* infcall.c (call_function_by_hand): Function return value is
always a non_lval, even when using struct_return.

gdb/
* printcmd.c (ALL_DISPLAYS_SAFE): New.
(map_display_numbers): New.
(do_delete_display): New.
(undisplay_command): Use map_display_numbers.
(do_enable_disable_display): New.
(enable_disable_display_command): New function.
(enable_display): Delete.
(enable_display_command): New.
(disable_display_command): Reimplement.
(_initialize_printcmd): Adjust "enable display" command to use
`enable_display_command' as callback.

gdb/doc/
* gdb.texinfo (Auto Display) <undisplay, enable display, disable
display>: Explain that the commands accept number ranges.

sim: common: trim trailing whitespace

gas: blackfin: add support for bf54x-0.4

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

*** empty log message ***

daily update

sim: bfin: forgot to cvs add the changelog

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

    * NEWS: Add Python breakpoint 'stop' operation.

Fix earlier changelog errors.

2011-03-14  Michael Snyder  <msnyder@vmware.com>

* gdbserver/hostio.c (handle_close): Remove unnecessary null test.

2011-03-14  Michael Snyder  <msnyder@vmware.com>

* objcopy.c (set_pe_subsystem): Free subsystem.

2011-03-08  Michael Snyder  <msnyder@vmware.com>

* wrstabs.c (stab_start_struct_type): Close memory leak.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

    * NEWS: Delete duplicate entry. Fix typo.

2011-03-07  Michael Snyder  <msnyder@vmware.com>

* readelf.c (process_version_sections): Free symbols.

2011-03-07  Michael Snyder  <msnyder@vmware.com>

* nm.c (display_rel_file): Free symsizes.

Fix ARI warning about function names in first column.
Put prototype declaration on same line as return type.
* objc-exp.y: Ditto.
* p-exp.y: Ditto.
* python/py-stopevent.h: Ditto.
For long function names, split parameters to allow function name
on same line as return type.
* solib-pa64.c: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
For long function declaration, use single line.
* hppa-tdep.h: Ditto.
* inferior.h: Ditto.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

    * gdb.texinfo (Breakpoints In Python): Add description and
              example
      of Python stop function operation.

2010-03-14  Phil Muldoon  <pmuldoon@redhat.com>

    * gdb.python/py-breakpoint.exp: Add Python stop operations
              tests.

2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>

    * python/python.h: Declare gdbpy_should_stop and
    gdbpy_breakpoint_has_py_cond.
    * python/python.c: Add python.h to includes.  Remove
    python.h from
    HAVE_PYTHON definition
    (gdbpy_should_stop): New dummy function.
    (gdbpy_breakpoint_has_py_cond): New dummy function.
    * python/py-breakpoint.c (bppy_init): Rewrite to allow
    sub-classing capabilities.
    (gdbpy_should_stop): New function.
    (gdbpy_breakpoint_has_py_cond): New function.
    (local_setattro): New function.
    * breakpoint.c (condition_command): Add check for Python
    'stop'
    operation.
    (bpstat_check_breakpoint_conditions): Execute Python
    'stop'
    operation function as part of stop/continue tests.

include/elf/
* arm.h (R_ARM_IRELATIVE): New relocation.

bfd/
* reloc.c (BFD_RELOC_ARM_IRELATIVE): New relocation.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_howto_table_2): Rename existing definition
to elf32_arm_howto_table_3 and replace with a single R_ARM_IRELATIVE
entry.
(elf32_arm_howto_from_type): Update accordingly.
(elf32_arm_reloc_map): Map BFD_RELOC_ARM_IRELATIVE to R_ARM_IRELATIVE.
(elf32_arm_reloc_name_lookup): Handle elf32_arm_howto_table_3.
(arm_plt_info): New structure, split out from elf32_arm_link_hash_entry
with an extra noncall_refcount field.
(arm_local_iplt_info): New structure.
(elf_arm_obj_tdata): Add local_iplt.
(elf32_arm_local_iplt): New accessor macro.
(elf32_arm_link_hash_entry): Replace plt_thumb_refcount,
plt_maybe_thumb_refcount and plt_got_offset with an arm_plt_info.
Change tls_type to a bitfield and add is_iplt.
(elf32_arm_link_hash_newfunc): Update accordingly.
(elf32_arm_allocate_local_sym_info): New function.
(elf32_arm_create_local_iplt): Likewise.
(elf32_arm_get_plt_info): Likewise.
(elf32_arm_plt_needs_thumb_stub_p): Likewise.
(elf32_arm_get_local_dynreloc_list): Likewise.
(create_ifunc_sections): Likewise.
(elf32_arm_copy_indirect_symbol): Update after the changes to
elf32_arm_link_hash_entry.  Assert the is_iplt has not yet been set.
(arm_type_of_stub): Add an st_type argument.  Use elf32_arm_get_plt_info
to get PLT information.  Assert that all STT_GNU_IFUNC references
are turned into PLT references.
(arm_build_one_stub): Pass the symbol type to
elf32_arm_final_link_relocate.
(elf32_arm_size_stubs): Pass the symbol type to arm_type_of_stub.
(elf32_arm_allocate_irelocs): New function.
(elf32_arm_add_dynreloc): In static objects, use .rel.iplt for
all R_ARM_IRELATIVE.
(elf32_arm_allocate_plt_entry): New function.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Add an st_type parameter.
Set srelgot to null for static objects.  Use separate variables
to record which st_value and st_type should be used when generating
a dynamic relocation.  Use elf32_arm_get_plt_info to find the
symbol's PLT information, setting has_iplt_entry, splt,
plt_offset and gotplt_offset accordingly.  Check whether
STT_GNU_IFUNC symbols should resolve to an .iplt entry, and change
the relocation target accordingly.  Broaden assert to include
.iplts.  Don't set sreloc for static relocations.  Assert that
we only generate dynamic R_ARM_RELATIVE relocations for R_ARM_ABS32
and R_ARM_ABS32_NOI.  Generate R_ARM_IRELATIVE relocations instead
of R_ARM_RELATIVE relocations if the target is an STT_GNU_IFUNC
symbol.  Pass the symbol type to arm_type_of_stub.  Conditionally
resolve GOT references to the .igot.plt entry.
(elf32_arm_relocate_section): Update the call to
elf32_arm_final_link_relocate.
(elf32_arm_gc_sweep_hook): Use elf32_arm_get_plt_info to get PLT
information.  Treat R_ARM_REL32 and R_ARM_REL32_NOI as call
relocations in shared libraries and relocatable executables.
Count non-call PLT references.  Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_check_relocs): Always create ifunc sections.  Set isym
at the same time as setting h.  Use elf32_arm_allocate_local_sym_info
to allocate local symbol information.  Treat R_ARM_REL32 and
R_ARM_REL32_NOI as call relocations in shared libraries and
relocatable executables.  Record PLT information for local
STT_GNU_IFUNC functions as well as global functions.   Count
non-call PLT references.  Use elf32_arm_get_local_dynreloc_list
to get the list of dynamic relocations for a local symbol.
(elf32_arm_adjust_dynamic_symbol): Handle STT_GNU_IFUNC symbols.
Don't remove STT_GNU_IFUNC PLTs unless all references have been
removed.  Update after the changes to elf32_arm_link_hash_entry.
(allocate_dynrelocs_for_symbol): Decide whether STT_GNU_IFUNC PLT
entries should live in .plt or .iplt.  Check whether the .igot.plt
and .got entries can be combined.  Use elf32_arm_allocate_plt_entry
to allocate .plt and .(i)got.plt entries.  Detect which .got
entries will need R_ARM_IRELATIVE relocations and use
elf32_arm_allocate_irelocs to allocate them.  Likewise other
non-.got dynamic relocations.
(elf32_arm_size_dynamic_sections): Allocate .iplt, .igot.plt
and dynamic relocations for local STT_GNU_IFUNC symbols.
Check whether the .igot.plt and .got entries can be combined.
Detect which .got entries will need R_ARM_IRELATIVE relocations
and use elf32_arm_allocate_irelocs to allocate them.  Use stashed
section pointers intead of strcmp checks.  Handle iplt and igotplt.
(elf32_arm_finish_dynamic_symbol): Use elf32_arm_populate_plt_entry
to fill in .plt, .got.plt and .rel(a).plt entries.  Point
STT_GNU_IFUNC symbols at an .iplt entry if non-call relocations
resolve to it.
(elf32_arm_output_plt_map_1): New function, split out from
elf32_arm_output_plt_map.  Handle .iplt entries.  Use
elf32_arm_plt_needs_thumb_stub_p.
(elf32_arm_output_plt_map): Call it.
(elf32_arm_output_arch_local_syms): Add mapping symbols for
local .iplt entries.
(elf32_arm_swap_symbol_in): Handle Thumb STT_GNU_IFUNC symbols.
(elf32_arm_swap_symbol_out): Likewise.
(elf32_arm_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define for all targets.

opcodes/
* arm-dis.c (get_sym_code_type): Treat STT_GNU_IFUNCs as code.

gas/
* config/tc-arm.c (md_pcrel_from_section): Use S_FORCE_RELOC to
determine whether a relocation is needed.
(md_apply_fix, arm_apply_sym_value): Likewise.

ld/testsuite/
* ld-arm/ifunc-1.s, ld-arm/ifunc-1.dd, ld-arm/ifunc-1.gd,
ld-arm/ifunc-1.rd, ld-arm/ifunc-2.s, ld-arm/ifunc-2.dd,
ld-arm/ifunc-2.gd, ld-arm/ifunc-2.rd, ld-arm/ifunc-3.s,
ld-arm/ifunc-3.dd, ld-arm/ifunc-3.gd, ld-arm/ifunc-3.rd,
ld-arm/ifunc-4.s, ld-arm/ifunc-4.dd, ld-arm/ifunc-4.gd,
ld-arm/ifunc-4.rd, ld-arm/ifunc-5.s, ld-arm/ifunc-5.dd,
ld-arm/ifunc-5.gd, ld-arm/ifunc-5.rd, ld-arm/ifunc-6.s,
ld-arm/ifunc-6.dd, ld-arm/ifunc-6.gd, ld-arm/ifunc-6.rd,
ld-arm/ifunc-7.s, ld-arm/ifunc-7.dd, ld-arm/ifunc-7.gd,
ld-arm/ifunc-7.rd, ld-arm/ifunc-8.s, ld-arm/ifunc-8.dd,
ld-arm/ifunc-8.gd, ld-arm/ifunc-8.rd, ld-arm/ifunc-9.s,
ld-arm/ifunc-9.dd, ld-arm/ifunc-9.gd, ld-arm/ifunc-9.rd,
ld-arm/ifunc-10.s, ld-arm/ifunc-10.dd, ld-arm/ifunc-10.gd,
ld-arm/ifunc-10.rd, ld-arm/ifunc-11.s, ld-arm/ifunc-11.dd,
ld-arm/ifunc-11.gd, ld-arm/ifunc-11.rd, ld-arm/ifunc-12.s,
ld-arm/ifunc-12.dd, ld-arm/ifunc-12.gd, ld-arm/ifunc-12.rd,
ld-arm/ifunc-13.s, ld-arm/ifunc-13.dd, ld-arm/ifunc-13.gd,
ld-arm/ifunc-13.rd, ld-arm/ifunc-14.s, ld-arm/ifunc-14.dd,
ld-arm/ifunc-14.gd, ld-arm/ifunc-14.rd, ld-arm/ifunc-15.s,
ld-arm/ifunc-15.dd, ld-arm/ifunc-15.gd, ld-arm/ifunc-15.rd,
ld-arm/ifunc-16.s, ld-arm/ifunc-16.dd, ld-arm/ifunc-16.gd,
ld-arm/ifunc-16.rd, ld-arm/ifunc-dynamic.ld,
ld-arm/ifunc-static.ld: New tests.
* ld-arm/farcall-group.d, ld-arm/farcall-group-size2.d,
ld-arm/farcall-mixed-lib-v4t.d, ld-arm/farcall-mixed-lib.d: Update
for new stub hashes.
* ld-arm/arm-elf.exp: Run them.

PR gdb/12576:
* dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
(needs_frame_dwarf_call): Likewise.

include/elf/
* internal.h (elf_internal_sym): Add st_target_internal.
* arm.h (arm_st_branch_type): New enum.
(ARM_SYM_BRANCH_TYPE): New macro.

bfd/
* elf-bfd.h (elf_link_hash_entry): Add target_internal.
* elf.c (swap_out_syms): Set st_target_internal for each
Elf_Internal_Sym.
* elfcode.h (elf_swap_symbol_in): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-sh-symbian.c (sh_symbian_relocate_section): Likewise.
* elf64-sparc.c (elf64_sparc_output_arch_syms): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Likewise.
* elflink.c (elf_link_output_extsym): Likewise.
(bfd_elf_final_link): Likewise.
(elf_link_add_object_symbols): Copy st_target_internal
to the hash table if we see a definition.
(_bfd_elf_copy_link_hash_symbol_type): Copy target_internal.
* elf32-arm.c (elf32_arm_stub_hash_entry): Replace st_type with
a branch_type field.
(a8_erratum_fix, a8_erratum_reloc): Likewise.
(arm_type_of_stub): Replace actual_st_type with an
actual_branch_type parameter.
(arm_build_one_stub): Use branch types rather than st_types to
determine the type of branch.
(cortex_a8_erratum_scan): Likewise.
(elf32_arm_size_stubs): Likewise.
(bfd_elf32_arm_process_before_allocation): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_final_link_relocate): Replace sym_flags parameter with
a branch_type parameter.
(elf32_arm_relocate_section): Update call accordingly.
(elf32_arm_adjust_dynamic_symbol): Don't check STT_ARM_TFUNC.
(elf32_arm_output_map_sym): Initialize st_target_internal.
(elf32_arm_output_stub_sym): Likewise.
(elf32_arm_symbol_processing): Delete.
(elf32_arm_swap_symbol_in): Convert STT_ARM_TFUNCs into STT_FUNCs.
Use st_target_internal to record the branch type.
(elf32_arm_swap_symbol_out): Use st_target_internal to test for
Thumb functions.
(elf32_arm_is_function_type): Delete.
(elf_backend_symbol_processing): Likewise.
(elf_backend_is_function_type): Likewise.

gas/
* config/tc-arm.c (arm_adjust_symtab): Set the branch type
for Thumb symbols.

ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Check
eh->target_internal.

opcodes/
* arm-dis.c (get_sym_code_type): Don't check for STT_ARM_TFUNC.
Use branch types instead.
(print_insn): Likewise.

bfd/
* elf32-arm.c (elf32_arm_check_relocs): Always assign a dynobj.
(elf32_arm_finish_dynamic_sections): Move sgot != NULL assertion
into the PLT block.

ld/
* emultempl/armelf.em (arm_elf_before_allocation): Check dynobj
instead of dynamic_sections_created.

bfd/
* elf32-arm.c (elf32_arm_check_relocs): Use call_reloc_p,
may_need_local_target_p and may_become_dynamic_p to classify
the relocation type.  Don't check info->symbolic or h->def_regular
when deciding whether to record a potential dynamic reloc.
Don't treat potential dynamic relocs as PLT references.
(elf32_arm_gc_sweep_hook): Update to match.  Assert that we don't
try to make the PLT reference count go negative.

ld/testsuite/
* ld-arm/arm-lib-plt-2a.s, ld-arm/arm-lib-plt-2b.s,
ld-arm/arm-lib-plt-2.dd, ld-arm/arm-lib-plt-2.rd: New tests.
* ld-arm/arm-elf.exp: Run them.

bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Always fill in the
GOT entry here, rather than leaving it to finish_dynamic_symbol.
Only create a dynamic relocation for local references if
info->shared.
(allocate_dynrelocs_for_symbol): Update dynamic relocation
allocation accordingly.
(elf32_arm_finish_dynamic_symbol): Don't initialise the GOT entry here.

ld/testsuite/
* ld-arm/exec-got-1a.s, ld-arm/exec-got-1b.s, ld-arm/exec-got-1.d,
ld-arm/unresolved-1.s, ld-arm/unresolved-1.d,
ld-arm/unresolved-1-dyn.d: New tests.
* ld-arm/arm-elf.exp: Run them.

bfd/
* elf32-arm.c (elf32_arm_allocate_dynrelocs): New function.
(elf32_arm_add_dynreloc): Likewise.
(elf32_arm_adjust_dynamic_symbol): Use elf32_arm_allocate_dynrelocs
to allocate dynamic relocations.
(elf32_arm_size_dynamic_sections): Likewise.
(allocate_dynrelocs): Likewise.  Rename to
allocate_dynrelocs_for_symbol.
(elf32_arm_final_link_relocate): Use elf32_arm_add_dynreloc to
create dynamic relocations.
(elf32_arm_finish_dynamic_symbol): Likewise.

Fix ARI warning about functions without parameters that do not
use (void).
* breakpoint.c (all_tracepoints): Replace () by (void).
* f-exp.y (match_string_literal): Ditto.
(yylex): Ditto.
* m2-exp.y (yylex): Ditto.
* mep-tdep.c (current_me_module): Ditto.
(current_options): Ditto.
(current_cop_data_bus_width): Ditto.
(current_cr_names): Ditto.
(current_cr_is_float): Ditto.
(current_ccr_names): Ditto.
* objc-exp.y (yylex): Ditto.
* p-exp.y (yylex): Ditto.
* remote.c (send_interrupt_sequence): Ditto.
* tracepoint.c (current_trace_status): Ditto.
* python/py-evts.c (gdbpy_initialize_py_events): Ditto.
* python/py-prettyprint.c (push_dummy_python_frame): Ditto.

* script-sections.cc (Sort_output_sections::script_compare):
Rename from is_before, change return type.
(Sort_output_sections::operator()): Adjust accordingly.

*** empty log message ***

daily update

* gdb.python/py-section-script.exp: Skip test if no Python support.

* gdb.base/solib-weak.exp: Allow "." prefix for ppc64.

*** empty log message ***

daily update

2011-03-11  Michael Snyder  <msnyder@vmware.com>

* cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
* cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
(lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
* completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
* top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.

Support TLS x32 GD->IE, GD->LE and LD->LE transitions.

bfd/

2011-03-12  H.J. Lu  <hongjiu.lu@intel.com>

* elf64-x86-64.c (elf_x86_64_check_tls_transition): Supprt TLS
x32 GD->IE and GD->LE transitions.
(elf_x86_64_relocate_section): Supprt TLS x32 GD->IE, GD->LE
and LD->LE transitions.

ld/testsuite/

2011-03-12  H.J. Lu  <hongjiu.lu@intel.com>

* ld-x86-64/tlsgd4.dd: New.
* ld-x86-64/tlsgd4.s: Likewise.
* ld-x86-64/tlsgd5.dd: Likewise.
* ld-x86-64/tlsgd5a.s: Likewise.
* ld-x86-64/tlsgd5b.s: Likewise.
* ld-x86-64/tlsgd6.dd: Likewise.
* ld-x86-64/tlsgd6a.s: Likewise.
* ld-x86-64/tlsgd6b.s: Likewise.
* ld-x86-64/tlsld2.dd: Likewise.
* ld-x86-64/tlsld2.s: Likewise.

* ld-x86-64/x86-64.exp (x86_64tests): Add tlsgd4, libtlsgd5.so,
tlsgd5, libtlsgd6.so, tlsgd6 and tlsld2.

*** empty log message ***

daily update

2011-03-11  Michael Snyder  <msnyder@vmware.com>

* event-loop-c (delete_async_signal_handler): Assert prev_ptr.
(delete_async_event_handler): Ditto.

2011-03-11  Michael Snyder  <msnyder@vmware.com>

* python/py-breakpoint.c (bppy_set_condition): Stop memory leak.

PR gold/12572
* testsuite/odr_violation2.cc: Add comment to make all error line
numbers double digits.
* testsuite/debug_msg.sh: Adjust expected errors.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

* python/py-breakpoint.c (bppy_get_commands): Fix memory leak.

2011-03-11  Michael Snyder  <msnyder@vmware.com>

* top.c (set_verbose): Assert showcmd was found.

2011-03-11  Maxim Grigoriev  <maxim2405@gmail.com>

* xtensa-tdep.c (warning_once): Correct style issues.

2011-03-11  Yao Qi  <yao@codesourcery.com>

* arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.

* remap.c (remap_debug_filename): Always allocate a buffer for the
returned pointer.
* stabs.c (stabs_generate_asm_file): Free the pointer returned by
remap_debug_filename.

* common/aclocal.m4: Remove.

2011-03-10  Maxim Grigoriev  <maxim2405@gmail.com>

* xtensa-tdep.c (windowing_enabled): Remove inline attribute.
(xtensa_write_register, xtensa_read_register): Likewise.
(xtensa_hextochar): Removed.
(xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.

Correct bad formatting in the comments. Two spaces must follow '.'.

2011-03-10  Maxim Grigoriev  <maxim2405@gmail.com>

* xtensa-tdep.c (xtensa_c0reg_t): Update comments.
(xtensa_call0_frame_cache_t): Update comments. New fields added.
(xtensa_alloc_frame_cache): Add initialization for new fields.
(xtensa_frame_cache): Change the way how call0_frame_cache () is called.
(warning_once): New function.
(xtensa_insn_kind): New item c0opc_and.
(call0_classify_opcode): Add the case for AND instruction.
(call0_track_op): Change arguments. New local variable litbase. Add the
case to handle c0opc_and. Update algorithms for c0opc_mov, c0opc_l32r,
c0opc_s32i to take into account dynamic stack adjustments in prologue.
Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
(call0_analyze_prologue): Update the comments. Change arguments.
Add the variety of updates to handle extended prologues, which now can
conduct dynamic stack adjustments.
(call0_frame_cache): Likewise.
(xtensa_skip_prologue): Update call0_analyze_prologue () function call.
(xtensa_gdbarch_init): Initialize xtensa_session_once_reported.

*** empty log message ***

daily update

Revert previous change.

2011-03-01  Michael Snyder  <msnyder@vmware.com>

* p-typeprint.c (pascal_type_print_method_args): Don't use
pointer until after null-check.

2011-02-28  Michael Snyder  <msnyder@vmware.com>

* tracepoint.c (cmd_qtv): Discard unused value 'packet'.
(cmd_qtframe): Ditto.
(cmd_qtbuffer): Ditto.
(cmd_bigqtbuffer): Ditto.

2011-02-27  Michael Snyder  <msnyder@vmware.com>

* gdbserver/tracepoint.c (tracepoint_finish_step): Fix
loop variable.

2011-03-10  Michael Snyder  <msnyder@vmware.com>

* gdbserver/server.c (handle_v_run): Free alloced buffer on early
return.

* tracepoint.c (trace_actions_command): Update.
* thread.c (thread_apply_command): Update.
* reverse.c (delete_bookmark_command): Update.
(bookmarks_info): Update.
* printcmd.c (undisplay_command): Update.
* memattr.c (mem_enable_command): Update.
(mem_disable_command): Update.
(mem_delete_command): Update.
* inferior.c (detach_inferior_command): Update.
(kill_inferior_command): Update.
(remove_inferior_command): Update.
* cli/cli-utils.h (struct get_number_or_range_state): New.
(init_number_or_range): Declare.
(get_number_or_range): Update.
* cli/cli-utils.c (init_number_or_range): New function.
(get_number_or_range): Change 'pp' parameter to 'state'.  Remove
static variables.
(number_is_in_list): Update.
* breakpoint.h (get_tracepoint_by_number): Update.
* breakpoint.c (map_breakpoint_numbers): Update for change to
get_number_or_range.
(find_location_by_number): Use get_number, not
get_number_or_range.
(trace_pass_set_count): New function.
(trace_pass_command): Update for change to get_number_or_range.
Rework loop logic.
(get_tracepoint_by_number): Remove 'multi_p' parameter; add
'state' parameter.

2011-03-10  Michael Snyder  <msnyder@vmware.com>

Revert the following change:
* dwarf2dbg.c (out_file_list): Free malloced 'dir'.
(out_debug_info): Free malloced 'dirname' and 'comp_dir'.

2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>

* python/py-param.c (add_setshow_generic): Add set/show callback
parameters.  Register Python object context.
(get_show_value): New function.
(get_set_value): New function.
(call_doc_function): New function.
(get_doc_string): Move behind get_show_value/get_set_value.

2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.texinfo (Parameters In Python): Document get_set_string and
get_show_string methods.

2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.python/py-parameter.exp: Update tests to the new Python
parameter API. Add "no documentation" test.  Add deprecated API
backward compatibility test.

gdb/
* fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.

[PATCH] Respect symbol wrappers when computing symbol resolutions.

ld/ChangeLog:

2011-03-10  Dave Korn  <dave.korn.cygwin@gmail.com>

* plugin.c (get_symbols): Use wrapped lookup for undefined symbols.

[PATCH] Fix issue from GCC PR47527: no ELF flags, EABI attribs, etc. in dummy IR BFD.

ld/ChangeLog:

2011-03-10  Dave Korn  <dave.korn.cygwin@gmail.com>

* ldlang.c (lang_check): Don't run checks on dummy IR BFDs.

[PATCH] Revise linker plugin API to better preserve link order.

ld/ChangeLog:

2011-03-10  Dave Korn  <dave.korn.cygwin@gmail.com>

* ldlang.h (lang_input_statement_type): Add new 'claim_archive' flag,
wrapping both it and 'claim' flag in #ifdef ENABLE_PLUGINS.
* ldmain.c (add_archive_element): Set it if the member is claimed.
* ldlang.c (new_afile): Initialise claim_archive and claimed members.
(find_replacements_insert_point): New helper function.
(lang_process): After adding and opening replacement files passed
from plugin, splice them into correct place in statement list and
file chains to preserve critical link order.
(lang_list_insert_after): New helper function.
(lang_list_remove_tail): Likewise.

* common.h (EM_V850): V850s now supplied by Renesas.
* readelf.c (get_machine_name): Update EM_V850 entry.

[PATCH] Do not use dummy bfd suffix for recognition, make it human-readable instead.

ld/ChangeLog:

2011-03-10  Dave Korn  <dave.korn.cygwin@gmail.com>

* plugin.c (IRONLY_SUFFIX): Revise to nicely human-readable form.
(IRONLY_SUFFIX_LEN): Delete.
(plugin_get_ir_dummy_bfd): Don't append IRONLY_SUFFIX.
(is_ir_dummy_bfd): Don't look for suffix; check claimed flag of
enclosing lang input statement instead.

[PATCH] Fix PE-COFF bug in orphan section alignment handling.

ld/ChangeLog:

2011-03-10  Dave Korn  <dave.korn.cygwin@gmail.com>

* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Preserve
alignment of input sections when creating orphan output sections
during relocatable link.
* emultempl/pep.em (gld_${EMULATION_NAME}_place_orphan): Likewise.

* gas/config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS,
TARGET_SYMBOL_FIELDS): Don't define.
* gas/config/tc-arc.c (arc_common): Use correct symbol "local" field.

* elf64-ppc.c (ppc64_elf_relocate_section): Provide section/offset
for LO_DS error message and correct multiple.

* elf64-ppc.c (bfd_elf64_bfd_link_just_syms): Define.
(ppc64_elf_link_just_syms): New function.
(opd_entry_value): Don't assume big-endian host.
(get_r2off): New function.
(ppc_build_one_stub, ppc_size_one_stub): Use it here.

remove subdir_do recursive make command in gdbserver/Makefile.in

This fixes:

    % [...]/gdbserver/configure
    % make distclean
    [...]
    rm -f amd64-avx.c amd64-avx-linux.c
    rm -f i386-mmx.c i386-mmx-linux.c
    make[1]: Entering directory `/[...]'
    make[1]: *** No rule to make target `subdir_do'.  Stop.
    make[1]: Leaving directory `[...]'
    make: *** [distclean] Error 2

gdb/gdbserver/ChangeLog:

        * Makefile.in (maintainer-clean realclean distclean): Remove
        "make ...  subdir_do" command.

* dwarf_reader.cc (Sized_dwarf_line_info): Include all lines,
but mark earlier ones as non-canonical
(offset_to_iterator): Update search target and example
(do_addr2line): Return extra lines in a vector*
(format_file_lineno): Extract from do_addr2line
(one_addr2line): Add vector* out-param
* dwarf_reader.h (Offset_to_lineno_entry): New field recording
when a lineno entry appeared last for its instruction
(Dwarf_line_info): Add vector* out-param
* object.cc (Relocate_info): Pass NULL for the vector* out-param
* symtab.cc (Odr_violation_compare): Include the lineno in the
comparison again.
(linenos_from_loc): New. Combine the canonical line for an
address with its other lines.
(True_if_intersect): New. Helper functor to make
std::set_intersection a query.
(detect_odr_violations): Compare sets of lines instead of just
one line for each function. This became less deterministic, but
has fewer false positives.
* symtab.h: Declarations.
* testsuite/Makefile.am (odr_violation2.o): Compile with -O2 to
mix an optimized and non-optimized object in the same binary
(odr_violation2.so): Same.
* testsuite/Makefile.in: Regenerate from Makefile.am.
* testsuite/debug_msg.cc (main): Make OdrDerived classes.
* testsuite/debug_msg.sh: Update line numbers and add
assertions.
* testsuite/odr_violation1.cc: Use OdrDerived, in a
non-optimized context.
* testsuite/odr_violation2.cc: Make sure Ordering::operator()
isn't inlined, and use OdrDerived in an optimized context.
* testsuite/odr_header1.h: Defines OdrDerived, where
optimization will change the
first-instruction-in-the-destructor's file and line number.
* testsuite/odr_header2.h: Defines OdrBase.

* fileread.cc (File_read::clear_views): Don't delete the whole
file view.

2011-03-09  Michael Snyder  <msnyder@vmware.com>

* dwarf2dbg.c (out_file_list): Free malloced 'dir'.
(out_debug_info): Free malloced 'dirname' and 'comp_dir'.
(emit_fixed_inc_line_addr): Assign instead of conditional
in assert.