package/wolfssl: enable ARMv8 hardware acceleration

Enable hardware acceleration for ARMv8 targets.

When ARMv8 hardware acceleration is enabled on AArch64 without any
additional flags, the build fails with the following messages:

/tmp/cciv7Oei.s: Assembler messages:
/tmp/cciv7Oei.s:580: Error: invalid addressing mode at operand 2 -- `ld1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:616: Error: invalid addressing mode at operand 2 -- `st1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:629: Error: invalid addressing mode at operand 2 -- `ld1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:669: Error: invalid addressing mode at operand 2 -- `st1 {v0.2d},[x0,256]'
/tmp/cciv7Oei.s:1211: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:1368: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
/tmp/cciv7Oei.s:1554: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:1719: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
/tmp/cciv7Oei.s:1870: Error: invalid addressing mode at operand 2 -- `ld1 {v16.2d},[x0,304]'
/tmp/cciv7Oei.s:2043: Error: invalid addressing mode at operand 2 -- `ld1 {v17.16b},[x19,304]'
make[3]: *** [Makefile:3801: wolfcrypt/src/port/arm/src_libwolfssl_la-armv8-aes.lo] Error 1

This is because of some inline assembly in parts of the AES structure
using the "m" constraint.

So lets use the flag -mstrict-align to prevent this error.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas: restrict the -mstrict-align workaround to AArch64, as ARMv8-A
can also be used in an AArch32 build, and in this case, gcc doesn't
support the -mstrict-align flag]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wolfssl: bump to version 3.15.5

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-time-hires: remove package

This is a core Perl module (ie. included in the Perl distribution), so
there is no point in having a separate package for it.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: enable __cxa_atexit

This is what GCC manual says [1]:
-------------------------->8----------------------
--enable-__cxa_atexit

    Define if you want to use __cxa_atexit, rather than atexit,
    to register C++ destructors for local statics and global objects.

    This is essential for fully standards-compliant handling of destructors,
    but requires __cxa_atexit in libc.

    This option is currently only available on systems with GNU libc
    ...
-------------------------->8----------------------

Important disadvantages of a simple atexit() are that [2]:
-------------------------->8----------------------
1999 C Standard only requires that the implementation support 32
registered functions, although most implementations support many more.

More important it does not deal at all with the ability in most implementations
to remove DSOs from a running program image by calling dlclose
prior to program termination.
-------------------------->8----------------------

Also it seems like all libc's we support in Buildroot (Glibc, uClibc and musl)
support __cxa_at_exit() so enable it unconditionally.

FWIW if we look around we'll see:
 1. In OpenEmbedded it is enabled for everything except gcc-cross-initial: [3], [4]
 2. In Crosstool-NG it is enabled by default: [5]
 3. In OpenWrt it is disabled only for uClibc, otherwise enabled: [6]

So I think we should be good with it as well.

[1] https://gcc.gnu.org/install/configure.html
[2] https://itanium-cxx-abi.github.io/cxx-abi/abi.html#dso-dtor-motivation
[3] https://github.com/openembedded/openembedded-core/blob/master/meta/recipes-devtools/gcc/gcc-configure-common.inc#L59
[4] https://github.com/openembedded/openembedded-core/blob/master/meta/recipes-devtools/gcc/gcc-cross-initial.inc#L23
[5] https://github.com/crosstool-ng/crosstool-ng/blob/master/config/cc/gcc.in#L270
[6] https://github.com/openwrt/openwrt/blob/master/toolchain/gcc/common.mk#L170

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Nicolas Cavallari <Nicolas.Cavallari@green-communications.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Claudiu Zissulescu <claziss@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/grpc: new package

Signed-off-by: Robert Rose <robertroyrose@gmail.com>
[Thomas:
 - add missing Config.in dependencies inherited from
   BR2_PACKAGE_PROTOBUF, as well as the corresponding Config.in
   comment
 - replace spaces by tabs in grpc.mk indentation
 - remove superfluous GRPC_SOURCE variable
 - improved patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/c-ares: support host build

A host version of this package will be useful as a dependency of the
host-grpc package.

Signed-off-by: Robert Rose <robertroyrose@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: bump ARC prebuild toolchain to arc-2018.09

Lets update prebuilt ARC toolchain to the most recent arc-2018.09.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: bumb ARC tools to arc-2018.09 release

This commit finally bumps ARC tools to the most recent arc-2018.09 release version.

ARC GNU tools of version arc-2018.09 bring some quite significant changes like:
 * Binutils v2.31.1 with additional ARC patches
 * GCC 8.2.1 with additional ARC patches
 * glibc 2.28 with additional ARC patches

More information on this release could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2018.09-release

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netsnmp: drop our custom config script fixups

Those custom fixups were added in 2011 with commit d1b42b24b88
(net-snmp: fixup paths in net-snmp-config) before we add generic config
scripts fixups in 2013 with commit 834f9311aac (pkg-infra: add
<pkg>_CONFIG_FIXUP to fix *-config files)

These custom fixups enclose the includes and libraries paths in single
quotes (presumably to protect them from further expnasion by the shell,
in case there are spaces for example).

It turns out that this breaks now that we replace the staging dir with
$(dirname $0), as it is between single quotes.

It looks like these fixups are really no longer needed anymore, since
the generic fixups do the job just fine (and better).

Fixes:
    http://autobuild.buildroot.org/results/2c5/2c5e379a06825bf8588bf070d733d2e1f98dab66/
    http://autobuild.buildroot.org/results/eea/eea704463c3f14dbb9bd7f8aa23d4b61c25987f4/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ejabberd: bump to version 18.09

This version requires much less patches than the previous one packaged
in Buildroot. It is compatible with Erlang OTP 21.
There are two remainning patches to:
- change the Makefile rules so dependencies are not downloaded/compiled;
- fix ejabberd user and load a default file in ejabberdctl script.

The patch 0006-fix-install-permissions has been replaced by setting
permissions on /etc/ejabberd directory via EJABBERD_PERMISSIONS.

The patch 0009-disable-mod_avatar has been removed because eimp is
a mandatory dependency since 0f86559d.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-eimp: new package

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-iconv: bump to version 1.0.10

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-sip: bump to version 1.0.26

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-stun: bump to version 1.0.25

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-oauth2: bump to version 0.6.3

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-yaml: bump to version 1.0.17

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-xmpp: bump to version 1.2.5

This package now depends also on erlang-p1-tls and erlang-p1-zlib.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-zlib: bump to version 1.0.4

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-xml: bump to version 1.1.34

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-stringprep: bump to version 1.0.14

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-tls: bump to version 1.0.25

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-cache-tab: bump to version 1.0.16

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erlang-p1-utils: bump to version 1.0.13

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-rebar.mk: remove dependencies from rebar.config

Instead of having a patch in every rebar package to remove the
dependencies in the rebar.config file in order to avoid rebar
downloading such dependencies at build time, implement it directly
as a post-patch hook in the rebar infrastructure.
Add a way to explicitly deactivate this behavior if any package needs
such lines in the rebar.config file.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas:
 - rename macro to remove-rebar-config-dependencies
 - move the macro outside the inner-rebar-package, so that it is
   declared with the other utility macros found in pkg-rebar.mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-networkmanager: bump to version 2.1

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-multidict: bump to version 4.5.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pycryptodomex: bump to version 3.7.1

License file update: correct spelling, and state the exact
patent numbers.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-engineio: bump to version 3.0.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/msgpack: bump to version 3.1.1

Add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tslib: update to 1.18

For the curious, there's the changelog summary:
https://github.com/kergoth/tslib/releases

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/strace: bump to version 4.25

This release also fixes compatibility with kernel 4.19 headers.

Fixes:
http://autobuild.buildroot.net/results/0763988c35a1de7d51c7094b5b002ed369f1a25f/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/strace: don't remove strace-graph unconditionally

strace-graph is a perl script. This script is removed unconditionally
since commit 720c0ca5ba7 ("strace: convert to makefile.autotools.in
format") from 2008. Since then Buildroot added support for perl on
target. Don't remove strace-graph when perl is built for target.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Thomas: move the hook definition inside the condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libid3tag: add .pc file and install to staging hook

The MPD project dropped autotools support in version 0.21.x in favor of
meson. While adapting the package to the meson build infrastructure, the
recognition of libid3tag failed, as only pkg-config is used to detect
the library. Note, that the version bump of the mpd package to 0.21.x is
not submitted, yet.

To help finding the build system to detect libid3tag with pkg-config
properly, add a .pc file and install it to staging.

This is exactly what Debian and Fedora do as well.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/civetweb: add hash for license file

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/civetweb: bump version to 1.11

v1.11 now has library and header install targets for use by apps that
serve pages.  The config changes allow enabling the civetweb webserver
app binary and/or libs and headers.

The C++ interface option is automatically enabled if C++ support is
available.

The civetweb Makefile sets -fPIC in CFLAGS when linking shared
objects, but not when compiling the objects used in the library
resulting in a link failure, so add -fPIC to COPT which is added
to CFLAGS in its Makefile.

The typo patch has already been incorporated upstream, so it was
removed.

Signed-off-by: John Faith <jfaith@impinj.com>
[Thomas:
 - keep using "config", a "menuconfig" for just three sub-options is
   not relevant
 - move the BR2_PACKAGE_CIVETWEB_LIB option near the existing
   BR2_PACKAGE_CIVETWEB_SERVER option, since both allow to select what
   should be built/installed
 - remove BR2_PACKAGE_CIVETWEB_SHARED_LIB, the .mk file will use
   BR2_STATIC_LIBS/BR2_SHARED_LIBS/BR2_STATIC_SHARED_LIBS to know what
   to do
 - select BR2_PACKAGE_CIVETWEB_SERVER if BR2_PACKAGE_CIVETWEB_LIB is
   not enabled to ensure at least the server *or* the library is
   selected
 - introduce CIVETWEB_BUILD_TARGETS in the .mk file to properly use
   the appropriate make targets to build the server, static library
   and/or shared library
 - cleanup the use of CIVETWEB_INSTALL_TARGETS, and use it for both
   target and staging installation
 - factorize common installation options into a CIVETWEB_INSTALL_OPTS
   variable that is used for both the target and staging installation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

grub2: add usage notes for grub2 arm and aarch64

Add notes to test grub2 running on ARM using qemu. The arm section
describes how to run it using u-boot and aarch64 shows how to do it
using efi, which is similar to what has to be done for x86_64.

The source for OVMF builds is also changed to
https://www.kraxel.org/repos/jenkins/edk2/ which is the source for
nightly builds (as rpms but which can be extracted in any distribution),
as the sourceforge link provided only very old builds.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
 - formatting fixes
 - simplify the AArch64/EFI example by using the aarch64_efi_defconfig]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

.gitlab-ci.yml: refresh with aarch64_efi_defconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/aarch64_efi_defconfig: new defconfig

New generic defconfig for aarch64, to run on aarch64 servers compliant
with EFI firmware and ACPI.

This can also be tested with qemu, and is useful so that we have an
arm defconfig with grub enabled. Tested with qemu 2.11.2 and AAVMF,
the aarch64 virtual machine UEFI firmware.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: extend readme.txt with more details]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/grub2: enable support for arm and aarch64 targets

This commit enables the arm-uboot, arm-efi and aarch64-efi grub2
platforms in Buildroot.

With the uboot platform, the grub2 image gets built as a u-boot image
and is loaded from u-boot through a regular "bootm". The only
requirement from the u-boot side in order to allow this is that u-boot
is built with CONFIG_API enabled. CONFIG_API seems to not be enabled
by default in most in-tree configurations, however, it seems to be
available for quite some time now. So it might be possible to use this
even on older u-boot versions. This is available only for arm
(32-bit).

With the efi platform, grub2 gets built as an EFI executable. This
allows EFI firmware to find and load it similarly as it can be done
for x86_64. Also, since u-boot v2016.05, u-boot is able to load and
boot an EFI executable, so the uboot efi platform can also be used
from u-boot in recent versions. This has been enabled (mostly) by
default for ARM u-boot. efi platform is available for both arm and
aarch64.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: move the BR2_USE_MMU dependency in
BR2_TARGET_GRUB2_ARCH_SUPPORTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/grub2: add option to install tools

Add an option to install grub2 support tools to the target.

In the context of Buildroot, some useful target tools provided are
grub2-editenv, grub2-reboot, which provide means to manage the grub2,
environment, boot order, and others.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/grub2: separate target and host builds

grub2 requires the host grub2-mkimage tool to build some of its target
images. The current way of building this tool in the grub2 package is
to perform a simultaneous host-tools/target-bootloader build during
the grub2 build step.

This method makes the recipe complex to understand, and proved to be a
complication during the work to enable grub2 support for architectures
other than x86.

This patch tries to do a better separation between the build of grub2
host tools and target boot loader image, as a partial step to enable
grub2 to build for other architectures.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-generic: adjust config scripts tweaks for per-package directories

This commit adjusts the logic in pkg-generic.mk that tweaks the
*-config shell scripts installed by various libraries to make it
compatible with per-package directories.

This requires two fixes:

 - replacing $(STAGING_DIR) with a relative path from the config script
   to the staging directory, rather than using an absolute path of the
   staging directory.

   Without this, a *-config script provided by package A, but called
   from package B per-package directory will return paths from package A
   per-package directory:

   $ ./output/per-package/mcrypt/host/usr/<tuple>/sysroot/usr/bin/libmcrypt-config --libs
   -L..../output/per-package/libmcrypt/host/usr/<tuple>/sysroot/usr/lib/

   The libmcrypt-config script is installed by the libmcrypt package,
   and mcrypt is a package that depends on libmcrypt. When we call the
   libmcrypt-config script from the mcrypt per-package directory, it
   returns a -L flag that points to the libmcrypt per-package
   directory.

   One might say: but this is OK, since the sysroot of the libmcrypt
   per-package directory also contains the libmcrypt library. This is
   true, but we encounter a more subtle issue: because -L paths are
   considered before standard paths, ld ends up finding libc.so in the
   libmcrypt per-package directory. This libc.so file is a linker
   script that looks like this:

   GROUP ( /lib/libc.so.6 /usr/lib/libc_nonshared.a  AS_NEEDED ( /lib/ld-linux.so.3 ) )

   Normally, thanks to ld sysroot awareness, /lib/libc.so.6 in this
   script is re-interpreted according to the sysroot. But in this
   case, the library is *outside* the compiler sysroot. Remember: we
   are using the compiler/linker from the "mcrypt" per-package
   directory, but we found "libc.so.6" in the "libmcrypt" per-package
   directory.

   This causes the linker to really use the /lib/libc.so.6 from the
   host machine, obvisouly leading to a build failure such as:

   output/per-package/libgcrypt/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/7.3.1/../../../../nios2-linux-gnu/bin/ld: cannot find /lib/libc.so.6
   output/per-package/libgcrypt/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/7.3.1/../../../../nios2-linux-gnu/bin/ld: cannot find /usr/lib/libc_nonshared.a
   output/per-package/libgcrypt/host/opt/ext-toolchain/bin/../lib/gcc/nios2-linux-gnu/7.3.1/../../../../nios2-linux-gnu/bin/ld: cannot find /lib/ld-linux-nios2.so.1

 - Some *-config scripts, such as the apr-1-config script, contain
   references to host tools:

   CC=".../output/per-package/apr/hosr/bin/arm-linux-gcc"
   CCP=".../output/per-package/apr/hosr/bin/arm-linux-cpp"

   We also want to replace those with proper relative paths. To
   achieve this, we need to also replace $(HOST_DIR) with a relative
   path. Since $(STAGING_DIR) is inside $(HOST_DIR), the first
   replacement of $(STAGING_DIR) by @STAGING_DIR@ is no longer needed:
   replacing $(HOST_DIR) by @HOST_DIR@ is sufficient. We still need to
   replace @STAGING_DIR@ by the proper path though, as we introduce
   @STAGING_DIR@ references in exec_prefix and prefix variables, as
   well as -I and -L flags.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: define TARGET_DIR_WARNING_FILE relative to TARGET_DIR

In commit 7e9870ce32d6329d9e3d602247fbe1709a2275a4 ("core: introduce
intermediate BASE_TARGET_DIR variable"), the definition of
TARGET_DIR_WARNING_FILE was changed to use $(BASE_TARGET_DIR) instead
of $(TARGET_DIR).

However, this change is incompatible with per-package directories, and
is in fact not needed.

With per-package directories, using $(BASE_TARGET_DIR) means that
TARGET_DIR_WARNING_FILE is
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM. Due to this, when
skeleton-init-common or skeleton-custom attempt to install it, it
fails, because it should be installed to their package per-package
target directory, and not the global output/target directory that doesn't
exist yet. The failure looks like this:

/usr/bin/install -m 0644 support/misc/target-dir-warning.txt /home/thomas/projets/buildroot/output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
/usr/bin/install: cannot create regular file '/home/thomas/projets/buildroot/output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM': No such file or directory
make[1]: *** [package/pkg-generic.mk:336: /home/thomas/projets/buildroot/output/build/skeleton-init-common/.stamp_target_installed] Error 1

TARGET_DIR_WARNING_FILE is used in three places:

 - In skeleton-custom.mk and skeleton-init-common.mk, where as
   explained above, using $(TARGET_DIR) fixes the use of
   $(TARGET_DIR_WARNING_FILE) in the context of per-package target
   directories.

 - In fs/common.mk, where it is used as argument to $(notdir ...) to
   retrieve just the name of the warning file. So in this case, we
   really don't care about the path of the file, just its name.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: move .NOTPARALLEL statement after including .config file

In a follow-up commit, we will make the .NOTPARALLEL statement
conditional on a Config.in option, so we need to move it further down.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: rework main directory creation logic

In the current code, the creation of the main output directories
(BUILD_DIR, STAGING_DIR, HOST_DIR, TARGET_DIR, etc.) is done by a
global "dirs" target. While this works fine in the current situation,
it doesn't work well in a context where per-package host and target
directories are used.

For example, with the current code and per-package host directories,
the output/staging symbolic link ends up being created as a link to
the per-package package sysroot directory of the first package being
built, instead of the global sysroot.

This commit reworks the creation of those directories by having the
package/pkg-generic.mk code ensure that the build directory, target
directory, host directory, staging directory and binaries directory
exist before they are needed.

Two new targets, host-finalize and staging-finalize are added in the
main Makefile to create the compatibility symlinks for host and
staging directories. They will be extended later with additional logic
for per-package directories.

Thanks to those changes, the global "dirs" target is entirely removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/check-host-rpath: split condition on two statements

Inside the check_elf_has_rpath(), we check if the host binary has a
correct RPATH, which should be either an absolute path to
$(HOST_DIR)/lib, or a relative path using $ORIGIN. Those two
conditions are checked in a single statements, but as we are going to
add a third condition, let's split this up a bit:

 - If we have a RPATH to $(HOST_DIR)/lib -> we're good, return 0
 - If we have a RPATH to $ORIGIN/../lib -> we're good, return 0
 - Otherwise, we will exit the loop, and return 1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: evaluate CCACHE and HOST{CC, CXX} at time of use

As we are going to move to per-package SDK, the location of CCACHE and
therefore the definitions of HOSTCC and HOSTCXX need to be evaluated
at the time of use and not at the time of assignment. Indeed, the
value of HOST_DIR changes from one package to the other.

Therefore, we need to change from := to =.

In addition, while doing A := $(something) $(A) is possible, doing A =
$(something) $(A) is not legal. So, instead of defining HOSTCC in
terms of the current HOSTCC variable, we re-use HOSTCC_NOCCACHE
instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mmc-utils: drop 1/1 from [PATCH] header in 0002-fix-overlapping-with-strncpy.patch

check-package (rightly so) complains about it:

package/mmc-utils/0002-fix-overlapping-with-strncpy.patch:4: generate your
patches with 'git format-patch -N'

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/keepalived: fix build with uclibc

Retrieve patch from upstream to fix build on uclibc

Fixes:
 - http://autobuild.buildroot.org/results/067ef9ae106b3e0740a70f6f9591b9da00d3da6a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-crossbar: bump to version 18.11.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fail2ban: new package

Fail2ban scans log files (e.g. /var/log/apache/error_log)
and bans IPs that show malicious behaviours.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: simplify $(SED) expression by using comma as a separator
instead of slash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-python: use proper --prefix and --root values

Some python software refers to setuptool/distutils options
to install files in python root directory (like data_files option).
To use this type of option, python root should point to the real python
root in buildroot folder and not to the guest os /.
Prefix path is always built starting from the python root, so it should
be simply /usr.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

stress-ng: bump to version 0.09.47

- Enable for uClibc, which is supported now.
- Keep microblaze, nios2 and arc restrictions, since it was not possible
  to test on those architectures (no hardware available).
- Keep musl restriction, since it was possible to compile the code (with
  some patches) but it failed at run time with

    Cannot set scheduler: errno=38 (Function not implemented)

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stress-ng: really remove patch merged upstream

Should have been removed in commit 27bce5fc8e (package/stress-ng: bump
to version 0.09.39) but was left as an empty file.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iptables: fix build with kernel headers < 3.12

Extend the workaround that was added in patch 0003 to cover ipv6
definitions.

Fixes:
http://autobuild.buildroot.net/results/23f/23ff396a568a865751471bf1f9e5dff2b73c8ab0/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qemu: enable seccomp if libseccomp is selected

It is required to use qemu with libvirt and allows us to resume working
on the libvirt package (https://patchwork.ozlabs.org/patch/841613).

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uclibc: bump to version 1.0.31

Remove all patches, since they were already applied upstream.
Add license file hash.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/dependencies: add a check for a suitable gzip

Recently, some hash mismatch have been reported, both by users as well
as autobuilder failures, about tarballs generated from git repositories.

This turned out to be caused by users having the 'gzip' command somehow
aliased to 'pigz' (which stand for: parallel implementation of gzip,
which takes advantage of multi-processor system to parallelise the
compression).

Unfortunately, the output of pigz-compressed archives differ from that
of gzip (even though they *are* valid gzip-compressed streams).

Add a dependency check that ensures that gzip is not pigz. If that is
the case, define a conditional dependency to host-gzip, that is used as
a download dependency for packages that will generate compressed files,
i.e. cvs, git, and svn.

Fixes:
    http://autobuild.buildroot.org/results/330/3308271fc641cadb59dbf1b5ee529a84f79e6d5c/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Marcin Niestrój <m.niestroj@grinn-global.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gzip: add host variant

In case someone is building on a musl-based distro (Alpine), we do as
for the target variant, and force the fflush_stdin detection.

We however do not do the /bin/sh trick, because we are building
natively, so the shell check is working.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/dependencies: treat BSD-tar like the other cases

Currently, when we detect that tar is BSD-tar, we fake an unsupported
version (major, minor) and rely on the version check to reject BSD-tar.

There is no reason to use such shenanigans, when we can simply reject it
from the onset.

Simplify the logic:
  - use positive logic in the condition
  - directly exit in error

Also, comment that case like the other cases are commented.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-tss: force libopenssl as openssl provider

Select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL and drop the patch to
compile with libressl.

The discussion with the tpm2-tss developers led to the conclusion that
libressl lacks some required functionalities. Quoting Andreas Fuchs[1]:
"LibreSSL does not support OAEP-mode with labels at all, even though the
internal OAEP-padding-function includes the parameters already. [...]
Further, the internal OAEP-padding-function does not support variable
hash algs, but staticly uses SHA1."

Notice that there will NOT be an option to use libgcrypt. OpenSSL will
soon become the default ESAPI crypto backend to prevent the problem of
forcing applications to link against both libgcrypt and libssl[2].

1. https://github.com/tpm2-software/tpm2-tss/pull/1207#issuecomment-440217659
2. https://github.com/tpm2-software/tpm2-tss/issues/1169

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: add option to enable virtual filesystem in host qemu

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: tweak option prompt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dante: add linux-pam optional dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

dante: disable pam

Fixes:
 - http://autobuild.buildroot.org/results/5222592f2052e18c184fae42214c112e7f39be6e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-sortedcontainers: bump to version 2.1.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-autobahn: bump to version 18.11.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-cython: bump to version 0.29.1

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linuxptp: bump to version 2.0

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/android-tools: add option to build ext4 utils for the host

This patch adds an option to build and install the ext4_utils for the
host, i.e. make_ext4fs, ext4fixup, ext2simg, img2simg, simg2img and
simg2simg.

Signed-off-by: Alex Kaplan <kaplan2539@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
 - simplify a bit the installation logic by using a single
   HOST_ANDROID_TOOLS_INSTALL_TARGETS variable, instead of having one
   specific for ext4 tools
 - drop "default n" from Config.in.host]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{dovecot, dovecot-pigeonhole}: bump version to 2.3.4, 0.5.4

We need to bump both packages in one commit:

https://dovecot.org/pipermail/dovecot-news/2018-November/000392.html

 Adjustments to several changes in Dovecot v2.3.4 make this Pigeonhole
 release dependent on that Dovecot release; it will not compile against
 older Dovecot versions. And, conversely, you need to upgrade
 Pigeonhole when upgrading Dovecot to v2.3.4.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 18.2.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/kconfig/merge_config.sh: avoid false positive matches from comment lines

We are using empty CONFIG_PREFIX_. This results in false positive match
for comment lines when merging config fragments.

To avoid false positive reports, we use separate sed expressions and
address comment lines explicitly.

This is actually is in the Linux kernel mainline (v4.20-rc2):
6bbe4385d035c6fac56f840a59861a0310ce137b
("kconfig: merge_config: avoid false positive matches from comment lines")

Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/test-pkg: use the correct config prefix when merging

We should use an empty prefix as we do not have any prefix.
Note that BR2_ is mere a convention.

Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/kconfig/merge_config.sh: fix merging buildroot config files

This patch allows us to define config prefix with CONFIG_ environment
variable.

By setting the proper config prefix, we will have proper 'redundant
configuration warnings' when we use '-r -m' options.

This is actually already in mainline for v4.20-rc1:
2cd3faf87d2d8f6123adf34741b9a7b98828a76f
("merge_config.sh: Allow to define config prefix")

Signed-off-by: Nasser Afshin <afshin.nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iptables: bump to version 1.8.2

Drop upstream patch.

Add upstream patch for fixing build with musl libc.

Add upstream patch fixing build with glibc older that 2.19, and another
upstream patch fixing musl build cause by the previous patch.

Add yet another upstream patch fixing build with kernel headers before
4.2

Switch download site to https for better security.

Add license file hash.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-firmware: bump version to latest 1baa348

Brief license changes:
 * ath10k/QCA6174/hw3.0/notice_ath10k_firmware-6.txt: mainly cleanups
   and s/Qualcomm Atheros/Qualcomm Technologies/

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-ubjson tests

Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-treq tests

Use a simple script to check the basic usage. The target has no https
server, so a connection from in the target to localhost must not
succeed.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-subprocess32 test

Add a simple test case to check the basic usage by calling 'ls' and
checking the output.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-service-identity tests

Add a simple test case that imports the module.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-pyyaml tests

Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-pynacl tests

Add a simple test case that minimally uses the module.
Add haveged to the target to generate enough entropy so pynacl ->
libsodium don't hang waiting for /dev/random.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-pexpect tests

Add a simple test case to check the basic usage. Call 'login' and try
wrong user/password, expecting the 'Login incorrect' message.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-passlib tests

Add a simple test case that creates a hash for a password and verifies
it against an incorrect and a correct password.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-constantly tests

Add a simple test case to check the basic usage by creating a class with
two constants.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-click tests

Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-cbor tests

Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-bitstring tests

Add a simple test case to check the basic usage by checking the
corresponding representation of a 12-bit decimal number in hex, binary
and integer.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-automat tests

Use a minimal script to check the basic usage by creating and using a
small state machine.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-attrs tests

Use a minimal script to check the basic usage creating a class with 2
attributes.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-argh tests

Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

sdl2: fix build with --disable-threads

SDL_LinuxSetThreadPriority() has been added since version 2.0.9 and
https://github.com/SDL-mirror/SDL/commit/f25a7fa870bdceb339e5105973f689606bcb9086

However, this function is used in src/dynapi/SDL_dynapi_procs.h even
when SDL_THREADS_DISABLED

However, when SDL_THREADS_DISABLED is set, SDL_LinuxSetThreadPriority is
not defined because thread/pthread/SDL_systhread.c is not built

So check SDL_THREADS_DISABLED in addition to __LINUX__

Fixes:
 - http://autobuild.buildroot.org/results/539cb9ab6c605dc6be73ebe90debab1a998f2451

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

keepalived: bump to version 2.0.10

- This version adds support for ipset version 7, see:
  https://github.com/acassen/keepalived/commit/b7a98f9265ffb5927c4d54c9a30726c76e65bb52
- Remove patch and AUTORECONF = YES, an alternative solution has been
  implemented, see:
  https://github.com/acassen/keepalived/commit/9bd10d8168b8e3c14bca61e504e64ed8c2b1eb8d
- Disable hardening option (enabled by default):
  https://github.com/acassen/keepalived/commit/5a65e1eb552bd973da35d7153b922682360a5ad2

Fixes:
 - http://autobuild.buildroot.org/results/b730e8b25c1d3343b7a6d73f6d3b82b13692578b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

lldpd: update to version 1.0.1

Drop patches for atom glue and remove CXX compiler check as they are
applied upstream.

Replace patch to disable libbsd with upstream patch to accomplish the
same thing using --without-libbsd.

Enable support for readline when that package is enabled.

Enable lldpd's systemd unit file.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

trinity: fix build with kernel headers >= 4.19

Retrieve patch from upstream to fix build with kernel headers >= 4.19
because VIDIOC_RESERVED has been removed since
https://github.com/torvalds/linux/commit/ea8532daee31bc72abfbc9ca7a43cbec0f6c05af

Fixes:
 - http://autobuild.buildroot.org/results/ddf6b1cf4e4727928ffba7387953c4cc9719df49

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luvi: add patch to fix build issue

Since bumping luv from version 1.9.1 to 1.22.0, building luvi fails, as
"luv.h" now includes "compat-5.3.h", which is locally shipped as a
dependency to lua-compat-5.3.

Fixing the issue reveals, that luvi is using `luaL_newlib` which is not
available in the Lua 5.1 API. Building luvi with luv 1.9.1 was not an
issue before, because luv 1.9.1 defined `luaL_newlib` in luv.h, which
was removed in 1.22.0 in favour of using lua-compat-5.3.

Therefore, add a patch which defines `luaL_newlib` in luvi.h.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luv: add patch to fix build issue with luvi

Add a patch to fix a build issue with luvi after bumping luv from
version 1.9.1 to 1.22.0.

The problem is that luv now uses lua-compat-5.3 instead of defining the
Lua 5.3 API itself. Unfortunately, luv.h now includes compat-5.3.h in the
header file, which causes the build issue with luvi, as luvi does not
find this local header file. Note, that luv ships lua-compat-5.3 as a
dependency.

Therefore, the patch includes compat-5.3.h in the source file luv.c, so
it isn't exposed to external programs.

Fixes:
http://autobuild.buildroot.net/results/2244cd30986aff29b763fb7183f6fc27a82bd7fa
http://autobuild.buildroot.net/results/01938f7f018dc69d564c22489933647b1daf62f3
http://autobuild.buildroot.net/results/8217e863c2776d299cb90b90f1a2ed8233ec82ba
.. and many more

Note, that fixing this issue reveals another issue in luvi, which is
fixed by the follow up patch.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireguard: bump version to 0.0.20181119

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>