* ppc-dis.c (print_insn_powerpc): Don't skip all operands
after setting skip_optional.

2007-05-18  Paul Brook  <paul@codesourcery.com>

bfd/
* elf32-arm.c (ARM2THUMB_V5_STATIC_GLUE_SIZE): Define.
(a2t1v5_ldr_insn, a2t1v5_ldr_insn): New.
(record_arm_to_thumb_glue): Add v5t non-pic glue.
(elf32_arm_create_thumb_stub): Ditto.

ld/testsuite/
* ld-arm/arm-call.d: Update expected output.

*** empty log message ***

daily update

    * gdbtypes.c (make_reference_type): Preserve the type chain
        and set the length of all the variants of the pointer type.

Move testsuite entries to testsuite/ChangeLog.

2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/4517
2003-06-05  Michal Ludvig  <mludvig@suse.cz>
* as.texinfo: Document new directives: .cfi_restore,
.cfi_undefined, .cfi_same_value, .cfi_return_column,
.cfi_remember_state and .cfi_restore_state.

2007-05-17  H.J. Lu  <hongjiu.lu@intel.com>

2003-06-05  Michal Ludvig  <mludvig@suse.cz>
* testsuite/gas/cfi/cfi-x86_64.s: Test new directives
and different writings of registers and numbers.
* testsuite/gas/cfi/cfi-x86_64.d: Updated pattern to
match the above change.

2007-05-17  Paul Brook  <paul@codesourcery.com>

ld/testsuite/
* ld-elf/multibss1.s: Use %nobits instead of @nobits.

    * gdbtypes.c (make_pointer_type): Preserve the pointer type chain
        and set the length of all the variants of the pointer type.

* mips-tdep.c (mips_n32n64_push_dummy_call): Fix and reformat a
comment.
(mips_o64_push_dummy_call): Reformat a comment.

* ld-m68k/merge-error-1a.d: Mismatch is an error.
* ld-m68k/merge-error-1b.d: Likewise.
* ld-m68k/merge-error-1c.d: Likewise.
* ld-m68k/merge-error-1d.d: Likewise.
* ld-m68k/merge-error-1e.d: Likewise.

* config/tc-m68k.c (md_apply_fix): Show value of out of range
fixups in error message.
(md_conver_frag_1): Propagate the fix source location and use
as_bad_where rather than fatal, for better error messages.

* gdb.base/sigbpt.exp: Preset segv_addr.

* objdump.c (load_debug_section): Select bias for DWARF debug addresses based on the flavour of the bfd.

2007-05-17  Qinwei  <qinwei@sunnorth.com.cn>

* score-tdep.c (score_frame_cache->fp, score_analyze_prologue)
(score_prologue_frame_base_address): Return fp to keep gdb print
local variables correctly when debugging information is stabs.

(score_analyze_prologue): For software watchpoint, fetch all the
instructions from range [startaddr, pc] once and identify them locally
to reduce memory access.
(score_malloc_and_get_memblock, score_free_memblock)
(score_adjust_memblock_ptr): New functions.
(score_fetch_inst): Fetch single instruction or mutiple instructions.

(score_target_can_use_watch, score_stopped_by_watch)
(score_target_insert_watchpoint, score_target_remove_watchpoint)
(score_target_insert_hw_breakpoint, score_target_remove_hw_breakpoint):
New functions for remote & local hw-watchpoint and hw-breakpoint.

2007-05-17  Qinwei  <qinwei@sunnorth.com.cn>

        * score-tdep.c (score_frame_cache->fp, score_analyze_prologue)
        (score_prologue_frame_base_address): Return fp to keep gdb print
        local variables correctly when debugging information is stabs.

        (score_analyze_prologue): For software watchpoint, fetch all the
        instructions from range [startaddr, pc] once and identify them locally
        to reduce memory access.
        (score_malloc_and_get_memblock, score_free_memblock)
        (score_adjust_memblock_ptr): New functions.
        (score_fetch_inst): Fetch single instruction or mutiple instructions.

        (score_target_can_use_watch, score_stopped_by_watch)
        (score_target_insert_watchpoint, score_target_remove_watchpoint)
        (score_target_insert_hw_breakpoint, score_target_remove_hw_breakpoint):
        New functions for remote & local hw-watchpoint and hw-breakpoint.

* ppc-dis.c (operand_value_powerpc, skip_optional_operands): New.
(print_insn_powerpc): Use the new operand_value_powerpc and
skip_optional_operands functions to omit or print all optional
operands as a group.
* ppc-opc.c (BFF, W, XFL_L, XWRA_MASK): New.
(XFL_MASK): Delete L and W bits from the mask.
(mtfsfi, mtfsfi.): Replace use of BF with BFF.  Relpace use of XRA_MASK
with XWRA_MASK.  Use W.
(mtfsf, mtfsf.): Use XFL_L and W.

* binutils-all/strip-3.d: Strip .pdr section.

daily update

*** empty log message ***

2007-05-16  Paul Brook  <paul@codesourcery.com>

* config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.

Fix typo.

Add support for SHF_MERGE sections.

* reply_mig_hack.awk: Check for `auto const mach_msg_type_t'
declarations as well.

* reply_mig_hack.awk: Check for `auto const mach_msg_type_t' declarations as well.

* config/arm/embed.mt (DEPRECATED_TM_FILE): Set to tm-arm.h.
* config/arm/tm-embed.h: Delete file.

* arm-tdep.h (arm_software_single_step): Declare.
* arm-tdep.c (arm_software_single_step): Make global.
(arm_gdbarch_init): Move set_gdbarch_software_single_step call
from here to ...
* arm-linux-tdep.c (arm_linux_init_abi): ... here ...
* armnbsd-tdep.c (arm_netbsd_init_abi_common): ... here ...
* armobsd-tdep.c (armobsd_init_abi): ... here ...
* arm-wince-tdep.c (arm_wince_init_abi): ... and here.

* arm-tdep.c (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT): No longer
allow defines to be overriden by TM file.
(THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Likewise.  Also,
change default to {0xbe,0xbe}.
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint,
arm_obsd_thumb_be_breakpoint): New global variables.
(armobsd_init_abi): Override tdep->thumb_breakpoint and
tdep->thumb_breakpoint_size.
* arm-wince-tdep.c (arm_wince_thumb_le_breakpoint): New variable.
(arm_wince_init_abi): Override tdep->thumb_breakpoint and
tdep->thumb_breakpoint_size.

* arm-tdep.c (arm_gdbarch_init): Add set_gdbarch_skip_trampoline_code.

2007-05-16  Markus Deuling  <deuling@de.ibm.com>

* server.c (handle_query): Add reply for qC packet.

* lib/gdb.exp (gdb_compile): Add support for Windows DLLs.
(gdb_compile_shlib): Likewise.
(skip_shlib_tests, gdb_download, gdb_load_shlibs): New.
(default_gdb_init): Clear cleanfiles.
(gdb_finish): Delete recorded cleanfiles.
* lib/gdbserver-support.exp (gdbserver_spawn): Use gdb_download.

* gdb.base/gdb1555.exp: Use skip_shlib_tests and gdb_load_shlibs.
Do not use isnative.
* gdb.base/pending.exp, gdb.base/shlib-call.exp, gdb.base/shreloc.exp,
gdb.base/so-impl-ld.exp: Likewise.
* gdb.base/solib-weak.exp: Likewise.  Skip for DLL targets.
* gdb.base/unload.exp: Likewise.  Do not pass empty option to
gdb_compile.

* NEWS: Mention removed "set mips stack-arg-size" and "set mips
saved-gpreg-size".

* mips-tdep.c (MIPS32_REGSIZE, MIPS64_REGSIZE): New constants.
(size_auto, size_32, size_64, size_enums, mips_abi_regsize_string)
(mips_stack_argsize_string, mips_stack_argsize): Delete.
(mips_abi_regsize): Simplify.
(mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
(mips_n32n64_return_value, mips_o32_push_dummy_call)
(mips_o32_return_value, mips_o64_push_dummy_call)
(mips_o64_return_value): Propogate constant register sizes.  Use the
ABI register size instead of mips_stack_argsize.
(mips_dump_tdep): Don't print mips_stack_argsize.
(_initialize_mips_tdep): Remove saved-gpreg-size and stack-arg-size
settings.

* gdb.texinfo (MIPS): Remove documentation for set mips saved-gpreg-size,
show mips saved-gpreg-size, and set mips stack-arg-size.

Commit file missed in last commit.

* config/mips/linux.mt (DEPRECATED_TM_FILE): Delete.
* config/mips/tm-linux.h: Delete.
* mips-linux-tdep.c (mips_svr4_so_ops): New.
(mips_linux_in_dynsym_resolve_code): Make static.  Use
svr4_in_dynsym_resolve_code.
(mips_linux_init_abi): Initialize mips_svr4_so_ops.  Call
set_solib_ops.
* solib-svr4.c (svr4_in_dynsym_resolve_code, svr4_so_ops): Make
global.
* solib-svr4.h (svr4_so_ops, svr4_in_dynsym_resolve_code): Declare.
* Makefile.in (mips-linux-tdep.o): Update.
* solib.c (set_solib_ops): New.
(current_target_so_ops): Update comment.
* solib.h (set_solib_ops): New prototype.

* printcmd.c (do_examine): Fix typos in a comment.

2007-05-16  H.J. Lu  <hongjiu.lu@intel.com>
    Alan Modra  <amodra@bigpond.net.au>

* elflink.c (_bfd_elf_adjust_dynamic_copy): Align dynamic bss
section to the minimum alignment.

2007-05-16  Paolo Bonzini  <bonzini@gnu.org>

* Makefile.def (bootstrap_stage): Replace stage_make_flags with
stage_cflags.
* Makefile.tpl (POSTSTAGE1_HOST_EXPORTS, POSTSTAGE1_FLAGS_TO_PASS):
Remove CFLAGS/LIBCFLAGS.
(configure-stage[+id+]-[+prefix+][+module+],
all-stage[+id+]-[+prefix+][+module+]): Pass it from [+stage_cflags+].
* Makefile.in: Regenerate.

gdb/
* configure.ac: Allow sysroots to be relocated under $prefix as
well as $exec_prefix.
* configure: Regenerate.

ld/
* configure.in: Allow sysroots to be relocated under $prefix as
well as $exec_prefix.
* configure: Regenerate.

daily update

*** empty log message ***

    * config/unknown.exp: Remove.

2007-05-15  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4504
* ld-elf/data1.c: New file.
* ld-elf/data1.h: Likewise.
* ld-elf/dynbss1.c: Likewise.
* ld-elf/pass.out: Likewise.

* ld-elf/shared.exp (build_tests): Add "Build libdata1.so".
(run_tests): Add "Run with libdata1.so".

2007-05-15  H.J. Lu  <hongjiu.lu@intel.com>
    Alan Modra  <amodra@bigpond.net.au>

PR ld/4504
* elf-bfd.h (_bfd_elf_adjust_dynamic_copy): New.
* elflink.c (_bfd_elf_adjust_dynamic_copy): New.

* elf-m10300.c (_bfd_mn10300_elf_adjust_dynamic_symbol): Call
_bfd_elf_adjust_dynamic_copy to adjust for the copy in dynamic
bss section.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Likewise.
* elf32-cris.c (elf_cris_adjust_dynamic_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol): Likewise.
* elf32-i370.c (i370_elf_adjust_dynamic_symbol): Likewise.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol): Likewise.
* elf32-m32r.c (m32r_elf_adjust_dynamic_symbol): Likewise.
* elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Likewise.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf32-sh.c (sh_elf_adjust_dynamic_symbol): Likewise.
* elf32-vax.c (elf_vax_adjust_dynamic_symbol): Likewise.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol): Likewise.
* elf64-sh64.c (sh64_elf64_adjust_dynamic_symbol): Likewise.
* elf64-x86-64.c (elf64_x86_64_adjust_dynamic_symbol): Likewise.
* elfxx-mips.c (_bfd_mips_vxworks_adjust_dynamic_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol): Likewise.

2007-05-15  Markus Deuling  <deuling@de.ibm.com>

        * gdb.base/info-proc.exp: Check is_remote.

ld/testsuite/
* ld-arm/vxworks1.ld: Swap .bss and .data.
* ld-arm/vxworks1-lib.rd: Update accordingly.
* ld-arm/vxworks1-lib.td: New test.
* ld-arm/arm-elf.exp: Run it.

* ld-i386/vxworks1.ld: Swap .bss and .data.
* ld-i386/vxworks1-lib.rd: Update accordingly.
* ld-i386/vxworks1-lib.td: New test.
* ld-i386/i386.exp: Run it.

* ld-mips-elf/vxworks1.ld: Swap .bss and .data.
* ld-mips-elf/vxworks1-lib.rd: Update accordingly.
* ld-mips-elf/vxworks1.rd: Likewise.

* ld-powerpc/vxworks1.ld: Swap .bss and .data.
* ld-powerpc/vxworks1-lib.rd: Update accordingly.
* ld-powerpc/vxworks1-lib.td: New test.
* ld-powerpc/powerpc.exp: Run it.

* ld-sh/vxworks1.ld: Swap .bss and .data.
* ld-sh/vxworks1-lib.rd: Update accordingly.
* ld-sh/vxworks1-lib.td: New test.
* ld-sh/sh-vxworks.exp: Run it.

* ld-sparc/vxworks1.ld: Swap .bss and .data.
* ld-sparc/vxworks1-lib.rd: Update accordingly.
* ld-sparc/vxworks1-lib.td: New test.
* ld-sparc/sparc.exp: Run it.

* mips3264r2.igen (DSHD): Fix compile warning.

bfd/
* elfxx-mips.c (mips_elf_create_local_got_entry): Remove
input_section argument.  Create .rela.dyn relocations against
symbol 0 rather than the section symbol.
(mips_elf_local_got_index): Remove input_section argument.
Update call to mips_elf_create_local_got_entry.
(mips_elf_got_page, mips_elf_got16_entry): Likewise.
(mips_elf_calculate_relocation): Update calls to
mips_elf_local_got_index, mips_elf_got16_entry and mips_elf_got_page.

ld/testsuite/
* ld-mips-elf/vxworks1-lib.rd: Expect the GOT relocation to be
against symbol 0.

gas/
* app.c (do_scrub_chars): Don't damage \@ pseudo-variables.

gas/testsuite/
* gas/arm/backslash-at.d: New.
* gas/arm/backslash-at.s: New.

bfd/
* elf32-arm.c (elf32_arm_final_link_relocate): Correctly
handle the Thumb-2 JUMP19 relocation.

ld/testsuite/
* ld-arm/arm-elf.exp: Add jump19 testcase.
* ld-arm/jump19.d: New.
* ld-arm/jump19.s: New.

PR gas/3041
* config/tc-m68k.c (relaxable_symbol): Make sure that the correct addend is stored for relocs against weak symbols.
    (md_apply_fix): So not loose track of addend for relocs against weak symbols.
* testsuite/gas/m68k/p3041.s: New test case.
* testsuite/gas/m68k/p3041.d: New expected disassembly.
* testsuite/gas/m68k/all.exp: Run new test for m68k-*-netbsd toolchains.
    Only run arch-cpu-1 test for ELF based toolchains.

    Tidy ups for m68k-netbsd gas toolchain:
* testsuite/gas/m68k/cpu32.d: Allow for extra text after expected disassembly.
* testsuite/gas/m68k/mcf-trap.d: Allow for alternative trap mnemonics.
* testsuite/gas/m68k/br-isab.d: Fix name of test.
* testsuite/gas/m68k/br-isac.d: Fix name of test.

PR 4479
* elf.c (elf_fake_sections): Don't allow backend to change
SHT_NOBITS if called for strip/objcopy --only-keep-debug.
* elfxx-mips.c (_bfd_mips_elf_fake_sections): Remove similar
fix from here.

* binutils-all/objcopy.exp: Only run needed-by-reloc test for ELF.

gas/testsuite/

2007-05-14  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/4502
* gas/i386/amd.d: Replace "pfmulhrw" with "pmulhrw".

opcodes/

2007-05-14  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/4502
* i386-dis.c (Suffix3DNow): Replace "pfmulhrw" with "pmulhrw".

daily update

*** empty log message ***

2007-05-14  H.J. Lu  <hongjiu.lu@intel.com>

* hist.c (scale_and_align_entries): Avoid C99 feature.

* hppa-hpux-tdep.c: Do not include <dl.h> or <machine/save_state.h>.
(offsetof): Do not define.
(find_stub_with_shl_get): Use numerical value 3 instead of
symbolic value TYPE_PROCEDURE.

2007-05-14  Markus Deuling  <deuling@de.ibm.com>

* gdb.base/gcore.exp: Initialize variable core_supported.

* all-cfg.texi (GDBTUI): New.
* gdb.texinfo (Mode Options): Use GDBTUI variable.
(TUI, TUI Overview, TUI Keys, TUI Single Key Mode, TUI Commands)
(TUI Configuration): Edit to improve clarity and fix problems of
both style and content.

* gdb_proc_service.h (paddr_t): Delete typedef.
* proc-service.c (ps_addr_to_core_addr, core_addr_to_ps_addr): New.
(ps_xfer_memory): Take a psaddr_t.  Use ps_addr_to_core_addr.
(ps_pglobal_lookup): Take a psaddr_t *.  Use core_addr_to_ps_addr.
(ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Take a psaddr_t.
* sol-thread.c (gdb_ps_addr_t): Use psaddr_t instead of paddr_t.
* Makefile.in (proc-service.o): Update.

* Makefile.in (mips-tdep.o): Update.
* mips-tdep.c (mips_gdbarch_init): Register the dwarf2 CFI
unwinder.

* dwarf2-frame.c (dwarf2_frame_prev_register): Use pack_long
instead of store_typed_address.
* value.c (pack_long): New.
(value_from_longest): Use it.
* value.h (pack_long): New prototype.

* dwarf2-frame.c (read_encoded_value): Correct typo.  Use
DW_EH_PE_signed if appropriate.

* dwarf2read.c (dwarf2_debug_line_missing_file_complaint): New
function.
(dwarf_decode_lines): Check for line info without a file.

* gdb.threads/linux-dp.exp: Allow non-hexadecimal IDs also.

* linux-thread-db.c (thread_db_pid_to_str): Print thread IDs
as hexadecimal.

* gdb.threads/linux-dp.exp: Expect hexadecimal thread IDs.
* gdb.threads/print-threads.exp (test_all_threads): Allow
negative and hexadecimal thread IDs.

* jv-exp.y (push_fieldnames): Use STRUCTOP_PTR instead of
STRUCTOP_STRUCT.
* jv-lang.c (evaluate_subexp_java): Handle STRUCTOP_PTR instead of
STRUCTOP_STRUCT.
* jv-typeprint.c (java_print_type): Do not crash on NULL varstring.

* gdb.java/jprint.java (public): Avoid invalid call to static
method.

* mips.igen (ALNV.PS, CEIL.L.fmt, CVT.L.fmt, CVT.PS.S, CVT.S.PL,
CVT.S.PU, FLOOR.L.fmt, LDXC1, LUXC1, LWXC1, MADD.fmt, MSUB.fmt,
NMADD.fmt, NMSUB.fmt, PLL.PS, PLU.PS, PREFX, PUL.PS, PUU.PS,
RECIP.fmt, ROUND.L.fmt, RSQRT.fmt, SWXC1, TRUNC.L.fmt): Add support
for mips32r2.

* gdbarch.sh (read_sp): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* frame.c (frame_sp_unwind): Do not call TARGET_READ_SP.

* avr-tdep.c (avr_read_sp): Remove.
(avr_unwind_sp): New function.
(avr_gdbarch_init): Install unwind_sp instead of read_sp callback.
* mips-tdep.c (mips_read_sp): Remove.
(mips_unwind_sp): New function.
(mips_gdbarch_init): Install unwind_sp instead of read_sp callback.
* score-tdep.c (score_read_unsigned_register): Remove.
(score_read_sp): Remove.
(score_unwind_sp): New function.
(score_gdbarch_init): Install unwind_sp instead of read_sp callback.

* buildsym.c (start_subfile): Handle absolute pathnames
while comparing subfile names.

* config/tc-mips.c (md_parse_option): Fix parsing of -O option.

ld/testsuite/
* ld-sh/vxworks1.dd: Remove hexadecimal prefixes from constant pool
contents.  Consistently use "!" as the comment character.
Consistently use _PROCEDURE_LINKAGE_TABLE_ in the first PLT entry.
* ld-sh/vxworks1-le.dd: Likewise.
* ld-sh/vxworks1-lib.dd: Likewise.
* ld-sh/vxworks1-lib-le.dd: Likewise.
* ld-sh/vxworks3.dd: Likewise.
* ld-sh/vxworks3-le.dd: Likewise.

2007-05-14  Mei Ligang  <ligang@sunnorth.com.cn>

* config/tc-score.c (data_op2, validate_immediate): Fix bug for addri, addri.c, subi, and
subi.c when immediate number is hex.
(score_insns): Remove subis and subis.c.
(do_sub_rdi16): Delete.

* emultempl/ppc64elf.em (gld${EMULATION_NAME}_new_vers_pattern):
Handle null pattern.

testsuite/:
* ld-elf/dl2a.list: New file.
* ld-elf/shared.exp: Add test using --dynamic-list=dl2a.list.

2007-05-14  Denis Pilat  <denis.pilat@st.com>

* gdb.mi/mi-console.exp, gdb.mi/gdb669.exp, gdb.mi/mi-cli.exp,
gdb.mi/mi-regs.exp, gdb.mi/mi-stepi.exp, gdb.mi/mi-syn-frame.exp,
gdb.mi/mi2-cli.exp, gdb.mi/mi2-console.exp, gdb.mi/mi2-disassemble.exp,
gdb.mi/mi2-regs.exp, gdb.mi/mi2-stepi.exp, gdb.mi/mi-disassemble.exp,
gdb.mi/mi2-syn-frame.exp: Remove commands already run in mi_run_to_main.

* elf.c (bfd_elf_string_from_elf_section): Return NULL on
invalid shstrndx.
(bfd_elf_get_str_section): Likewise.

daily update

*** empty log message ***

* hppa-hpux-tdep.c: Include "regcache.h".
* hppa-linux-tdep.c: Likewise.
* hppa-tdep.c: Include "gdb_stdint.h".
(find_unwind_entry): Cast host pointer to uintptr_t before passing
it to paddr_nz.
* Makefile.in: Update dependencies.

* blockframe.c: Remove obsolete comments.
* alpha-nat.c (fetch_osf_core_registers): Update comment.
* arm-tdep.h (enum gdb_regnum): Remove obsolete part of comment.
* hppa-tdep.h (enum hppa_regnum): Likewise.
* mips-tdep.h: Likewise.
* m68hc11-tdep.c: Likewise.

* inferior.h (read_sp): Remove prototype.
* regcache.c (read_sp): Remove.
* gcore.c (derive_stack_segment): Use get_frame_sp instead of read_sp.
* infcall.c (call_function_by_hand): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use regcache instead
of calling read_sp.
* rs6000-tdep.c (rs6000_push_dummy_call): Likewise.

daily update

*** empty log message ***

PR 4497
* elf-eh-frame.c (struct cie): Add "local_personality".  Make
"personality" a union.
(cie_eq): Compare local_personality too.  Adjust personality
comparison.
(_bfd_elf_discard_section_eh_frame): Check binding on personality
reloc sym to allow for bad symtab.  Use stashed local syms rather
than reading personality local sym.  Handle discarded sections.

include/elf/
* spu.h (R_SPU_ADDR16X): Define.
(R_SPU_PPU32, R_SPU_PPU64): Renumber.
bfd/
* elf32-spu.c (elf_howto_table): Add howto for R_SPU_ADDR16X.

* i386-linux-nat.c (i386_linux_resume): Use regcache functions
instead of read_register and read_register_pid.

* ia64-linux-nat.c (enable_watchpoints_in_psr): Use REGCACHE
argument instead of PTID.  Use regcache functions instead of
read_register_pid.
(ia64_linux_insert_watchpoint): Update call.
(ia64_linux_stopped_data_address): Use regcache functions
instead of read_register_pid and write_register_pid.

* libunwind-frame.h (struct regcache): Add forward declaration.
(libunwind_get_reg_special): Add REGCACHE argument.
* libunwind-frame.c (libunwind_get_reg_special): Add REGCACHE
argument.  Pass it to unw_init_remote_p.

* ia64-tdep.c (ia64_pseudo_register_read): Pass regcache to
libunwind_get_reg_special.
(ia64_access_reg): Remove "write" case.
(ia64_access_fpreg): Likewise.  Read from next_frame passed
as callback argument instead of from current_regcache.
(ia64_access_rse_reg): Remove "write" case.  Read from regcache
passed as callback argument instead of from current_regcache.
(ia64_access_rse_fpreg): New function.
(ia64_unw_rse_acce): Use it instead of ia64_access_fpreg.

*** empty log message ***

daily update

* NEWS: Mention SPU overlay support.

* spu-tdep.c (spu_frame_unwind_cache): Add comment.

* breakpoint.c (remove_breakpoint): Do not remove software
breakpoints in unmapped overlay sections.

* gdb.base/overlays.exp: Add support for targets with only code
overlay support, not data overlay.  Support spu-*-* target in
this mode.
* gdb.base/ovlymgr.c: Provide stubs for spu target.
* gdb.base/spu.ld: New file.

* spu-tdep.c: Include "observer.h".
(spu_frame_unwind_cache): Unwind PC through overlay return stubs.
(spu_overlay_data): New variable.
(struct spu_overlay_table): New type.
(spu_get_overlay_table, spu_overlay_update_osect, spu_overlay_update,
spu_overlay_new_objfile): New functions.
(spu_gdbarch_init): Install spu_overlay_update.
(_initialize_spu_tdep): Register spu_overlay_new_objfile,
allocate spu_overlay_data objfile data.

* gdbarch.sh (overlay_update): New gdbarch function.
(struct obj_section): Add forward declaration.
* gdbarch.c, gdbarch.h: Regenerate.

* symfile.c (simple_overlay_update): Make global.
(target_overlay_update): Remove variable.
(overlay_is_mapped): Call gdbarch_overlay_update instead of
target_overlay_update.
(overlay_load_command): Likewise.
* symfile.h (struct obj_section): Add forward declaration.
(simple_overlay_update): Add prototype.

* m32r-tdep.c (m32r_gdbarch_init): Install simple_overlay_update.

doc/ChangeLog:

* observer.texi (GDB Observers): New observer "new_objfile".

ChangeLog:

* observer.sh: Add "struct objfile" forward declaration.
* target.h (deprecated_target_new_objfile_hook): Remove.
* symfile.c (deprecated_target_new_objfile_hook): Remove.
(clear_symtab_users): Call observer_notify_new_objfile.
(symbol_file_add_with_addrs_or_offsets): Likewise.
* rs6000-nat.c: Include "observer.h".
(vmap_ldinfo): Call observer_notify_new_objfile.
(xcoff_relocate_core): Likewise.
* remote.c (remote_new_objfile_chain): Remove.
(remote_new_objfile): Do not call remote_new_objfile_chain.
(_initialize_remote): Use observer_attach_new_objfile.
* tui/tui-hooks.c (tui_target_new_objfile_chain): Remove.
(tui_new_objfile_hook): Do not call tui_target_new_objfile_chain.
(_initialize_tui_hooks): Use observer_attach_new_objfile.
* aix-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(new_objfile): Do not call target_new_objfile_chain.
(_initialize_aix_thread): Use observer_attach_new_objfile.
* hpux-thread.c: Include "observer.h"
(target_new_objfile_chain): Remove.
(hpux_thread_new_objfile): Make static.  Do not call
target_new_objfile_chain.
(_initialize_hpux_thread): Use observer_attach_new_objfile.
* linux-thread-db.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(thread_db_new_objfile): Do not call target_new_objfile_chain.
(_initialize_thread_db): Use observer_attach_new_objfile.
* sol-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(sol_thread_new_objfile): Make static.  Do not call
target_new_objfile_chain.
(_initialize_sol_thread): Use observer_attach_new_objfile.
* Makefile.in (aix-thread.o, hpux-thread.o, linux-thread-db.o,
rs6000-nat.o, sol-thread.o, tui-hooks.o): Add dependency on
$(observer_h).

* gdbarch.sh (remote_translate_xfer_address): Remove.
* gdbarch.h, gdbarch.c: Regenerate.
* arch-utils.c (generic_remote_translate_xfer_address): Remove.
* arch-utils.h (generic_remote_translate_xfer_address): Remove.
* remote.c (remote_write_bytes_aux, remote_read_bytes): Do not
call gdbarch_remote_translate_xfer_address.
* frv-tdep.c (frv_gdbarch_init): Do not call
set_gdbarch_remote_translate_xfer_address.
* ia64-tdep.c (ia64_remote_translate_xfer_address): Remove.
(ia64_gdbarch_init): Do not install it.

* NEWS: Mention change in handling the -tui option.

* linux-thread-db.c (enable_thread_event_reporting): Fix comment
typo.

PR 4479
* objcopy.c (copy_object): Don't copy ELF program headers for
--only-keep-debug.

* breakpoint.c (single_step_breakpoint_inserted_here_p): New function.
(breakpoint_inserted_here_p): Call it.
(software_breakpoint_inserted_here_p): Likewise.

* binutils-all/needed-by-reloc.s: Use .long rather than .4byte.